Your crankshaft's lack of free rotation could be caused by one of the following: incorrect journal bearings Cylinders that are overpressurized. broken chain or timing belt.
How is a crankshaft rotated?The best approach to turn your engine over is to put the socket on the front of the crankshaft bolt, which is normally mounted to your crankshaft, and then turn the crankshaft manually with your wrench (turning the wrench in a clockwise motion).
A rotating assembly is what?The mating ring (with spiral grooves) fitted on a shaft sleeve and secured axially by a clamp sleeve and a locknut make up the rotating assembly. Typically, it is pin- or key-driven. The primary ring is installed in the fixed assembly.
To know more about crankshaft's visit:-
https://brainly.com/question/29694018
#SPJ4
Which one of the following is NOT a way to improve the P/Q rating of a company's brand of action-capture cameras? a. Increasing the number of photo modes b. Improving the image quality c. Adding one or two more extra perfunctory functions d. Spending additional money to improve the camera housing e. Spending additional money to improve editing/sharing capabilities
a)Increasing the number of models in the company's line of multi-featured cameras is NOT a way to improve the P/Q rating of a company's brand of action-capture cameras.
what is p/q rating?A URL and a grid to note your observations make up a Page Quality (PQ) rating work, which you can use to direct your investigation of the landing page and the website linked to the URL. Evaluation of the page's effectiveness in achieving its objectives is the ultimate goal of the Page Quality ranking. As you can see, changing some parts, components, or specifications has a greater impact on the P/Q rating than changing other parts, components, or specifications. This shows that some design-related elements have a greater impact on product performance and quality (P/Q ratings) than others. The corporation must allocate more dollars to the development of the cameras' software and controls that are best suited for the camera models in issue if it wants to raise the P/Q rating of the multi-featured cameras.
To know more about P/Q ratings, visit:
https://brainly.com/question/5164638
#SPJ1
are/is a customer-touching CRM application.
O CMAS
O SFA
O FAQS
O CIC
Option 3 is correct. FAQs are the customer - touching CRM application. These programs are referred to as electronic CRM (e-CRM) apps or customer-touching CRM applications.
Customers connect directly with these technologies and apps, as opposed to customer-facing applications, where customers deal directly with a company representative. A frequently asked questions (FAQ) list is widely used in publications, websites, email lists, and online discussion forums where regular questions tend to come up, for instance through posts or inquiries by new members pertaining to typical knowledge gaps. Although the format is a useful way to organize information, a text consisting of questions and their answers may nonetheless be referred to as a FAQ regardless of whether the questions are in fact frequently asked. The goal of a FAQ is typically to provide information on frequently asked questions or concerns.
Know more about technologies here:
https://brainly.com/question/9171028
#SPJ4
Activity 12: IPv4 Router routing table Match each of the descriptions below with the right routing table column D 192.168.1.0/24 90/3072) via 192.168.3.1, GigabitEthernet0/0 00:06:03, A B C D E F 1. The elapsed time since the network was discovered. 2. The administrative distance (source) and metric to reach the remote network 3. How the network was learned by the router. 4. Shows the destination network. 5. The next hop IP address to reach the remote network. 6. The outgoing interface on the router to reach the destination network
To send data across wired or wireless technologies, these networked devices employ a set of guidelines known as communications protocols.
1. The amount of time that has passed since the network was found: E i.e., 00:06:03
2. The administrative distance and metric needed to connect to the distant network: C i.e., [90/3072]
3. How the router discovered the network: A
4. Displays the final network: B i.e., 192.168.1.0 / 24
5. The following IP address is needed to access the distant network: I.e., through 192.168.3.1
6. The router's outgoing interface for connecting to the target network: GigabitEthernet0/0, for example
Computer networking is the term for a network of connected computers that may communicate and share resources.
Two or more computers connected together to share resources (such printers and CDs), exchange files, or enable electronic conversations make up a network.
Learn more about Network here:
https://brainly.com/question/29350844
#SPJ4
For the bar to be in rotational equilibrium, should I be in the direction from a to b or b to a?
Drag the terms on the left to the appropriate blanks on the right to complete the sentences
Answer:
It is not possible to determine the direction of rotational equilibrium without more information about the specific situation involving the bar. In order to determine the direction of rotational equilibrium, you would need to know the location and magnitude of all forces acting on the bar, as well as the mass and distribution of mass within the bar. You would also need to know the location of the center of mass of the bar, as well as any pivot points or points of support on which the bar is resting. Once you have this information, you can use the principles of rotational equilibrium to determine the direction in which the bar will rotate, if at all.
Explanation:
SELF EXPLANATORY
14 How many bytes are lost due to internal fragmentation after the 4 allocations? Answer: ut of question 15 Describe an approach you could take to fit another 100 byte allocation within your original 512 bytes. You can assume you can use your approach to allocate all 5 100 byte allocations from scratch. ut of e A ВІ U . $$ iii !!! Inil Inil I > * More question
It will be given 36 frames, causing 2,048*1,086=962 bytes of internal fragmentation.
We have no external fragmentation while using a paging technique since every available frame can be given to a process that requires it. We might, however, be internally fractured. You'll see that units called frames are assigned. The last frame allocated could not be entirely filled if a process's memory needs do not align with page boundaries. For instance, a process of 72,766 bytes will require 35 pages + 1,086 bytes if the page size is 2,048 bytes. It will be given 36 frames, causing 2,048*1,086=962 bytes of internal fragmentation. A process would, in the worst scenario, require n pages + 1 byte. It would be allocated n+1 frames, resulting in internal fragmentation of almost a whole frame.
Know more about bytes here:
https://brainly.com/question/12996601
#SPJ4
in an inheritance relationship, the subclass constructor always executes before the superclass constructor. True or false?
Always run before the subclass constructor is the superclass constructor.The final modifier must be overridden in a subclass when a method is declared with it. A superclass has access to packages.
A subclass must utilize the public accessor and mutator methods rather than the private instance variables of the superclass in order to access the public methods from the superclass that it extends. Additionally, constructors from the superclass are not inherited by subclasses. We utilize the super() function to directly invoke the superclass constructor from the subclass constructor. It's an exclusive variation of the super keyword. Only within the subclass constructor may super() be used, and it must come first. Only the subclass' instance variables can be initialized by the constructors. As a result, when a subclass object is created, the subclass object must also immediately call one of the superclass' constructors. You will get a compile-time error if the super class does not have a no-argument constructor.
Learn more about superclass here:
https://brainly.com/question/14959037
#SPJ4
Determine the force in each member of the truss, and state if the members are in tension or compression. 400 N 4 m 600N m 3 m (a)
The technique entails disassembling the truss into separate portions and examining each section as a distinct rigid body.
The method of sections is typically the quickest and simplest way to identify the unidentified forces acting on a particular truss element. Ties, which are members that are being stretched, are tension members found in trusses.
The arrows are displayed pulling in on themselves as is standard practice in the business. The tension in a beam, on the other hand, pulls outward from the beam as depicted in the bottom diagram due to the tension forces.
To learn more about tension and compression from given link
brainly.com/question/24096660
#SPJ4
Formalism foregrounds subjectivity
Yes
No
Often MATLAB is used to plot a sinusoidal signal and this requires that the time axis be defined because the plot command operates on vectors for horizontal and vertical axes. The following MATLAB code generates a signal x[n] and plots x[n] versus n: Ts = 0.01; % units are seconds Duration = 0.3; tt = 0: Ts: Duration; Fo = 380; % units are Hz xn = 2*cos(2*pi*Fo*tt + 0.6*pi); stem(0:length(xn)-1, xn) Make the stem plot of the signal x[n] with n as the horizontal axis. Either sketch it or plot it using MATLAB. Assume that the n index starts at zero. In the plot, measure the period of the discrete-time signal x[n]. Determine the correct formula for the discrete-time signal in the form x[n] = A cos(omega_0 n + phi) with omega_0 epsilon [0, pi]. Explain how aliasing affects the formula and the stem plot that you made.
a) Check the attatchment given below.
b) From the plot period of discrete signal N = 5 samples.
c) The correct formula for the discrete-time signal in the form
x[n] = A[tex]cos(\hat\omega_0 n + \phi)[/tex] with [tex]\hat\omega_0\ \epsilon \ [0, pi][/tex] is possible if A = 2
i.e. [tex]x[n]=2\times cos(0.4\pi n-0.6\pi )[/tex].
d) The discrete signal remains same with aliasing, so the stem plot also remains ,but when comes to discrete signal frequency ,you have many frequencies is possible, i.e [tex]\hat{w_{o}},\hat{w_{o}}+2\pi l,2\pi l-\hat{w_{o}}[/tex]
What is discrete signal?Simulink® models can handle signals in both discrete and continuous time. Models created with the DSP System ToolboxTM are only meant to process discrete-time signals. A discrete-time signal is a series of values that correspond to specific points in time.
The signal's sample times are the time instants at which the signal is defined, and the associated signal values are the signal's samples. A discrete-time signal has traditionally been considered undefined at points in time between the sample times.
The sample period Ts of a periodically sampled signal is the equal interval between any two consecutive sample times. The sample rate Fs is equal to the sample period's reciprocal, or 1/Ts. The number of samples in the signal per second is defined as the sample rate.
Learn more about discrete-time signals
https://brainly.com/question/14863625
#SPJ4
In preparing a network diagram, drawing activities in a is not acceptable because it portrays a path of activities that perpetually repeats itself. a. loop c. list b. ladder d. link
A line that has been bent or doubled so that it creates a closed or partially open curve inside itself through which another line can be passed or into which a hook can be hooked.
How many different loop types are there in Python?Python offers the following loops to meet your looping requirements. Python provides three options for how to execute the loops. Although the syntax and the amount of time needed to check the condition vary, all of the strategies have the same basic functionality.
Why are loop activities not permitted in a diagram?To maintain a high level of quality, we examine their content and incorporate your suggestions. A Drawing activities in a loop when creating a network diagram is not recommended.
To know more about Loop visit:-
brainly.com/question/14390367
#SPJ4
28. Which method or operator can be used to concatenate lists? A. B. + C. % D. concat 29. What will be the value of the variable list after the following code executes? list = (1, 2, 3, 4] list[3] = 10 A. [1, 2, 3, 10] B. [1, 2, 10, 4] C. [1, 10, 10, 10] D. Nothing; this code is invalid 30. Consider the following list: inventory = ["washer", "dryer", "microwave") Which of the following will display the item value, "dryer"? A. print(inventory[0]) B. print(inventory(1) C. print(inventory[2]) D. printinventory(-1)) 31. What will be the value of the variable list2 after the following code executes? list1 = [1, 2, 3] list2 = 0 for element in list1: list2.append(element) list1 = [4, 5, 6] A. [4, 5, 6] C. (1,2,3,4,5,6] B. (1, 2, 3] D. None of the above 32. Given that: aList = [1,2,3,4] which of the following will display the list [2,3,4] at the screen? A. print(aList[1:3]) B. print(aList[2:41) C. print(aList[2:1) D. print(aList[-3:]) 33. Given that: aList = [1,2,10,11,12,13] del aList[3] what will be printed by print (aList) A. [1,2,11,12,13] C. [1,2,10,12,13] B. (1,10,11,12,13] D. (1,2,10,11,13] 34. Given that: my_tools = ['hammer', 'screwdriver', 'wrench', 'pliers', 'nailer', 'table saw') my_tools[2:4]= ['chainsaw', 'chipper'] what will be printed by print (my_tools) A. ['hammer','chainsaw', 'chipper','screwdriver','wrench','pliers', 'nailer', 'table saw'] B. ['hammer','screwdriver', 'wrench', 'chainsaw', 'chipper', 'nailer', 'table saw') C. ['hammer','screwdriver', 'chainsaw','chipper', 'nailer', 'table saw'] D. ['hammer',chainsaw', 'chipper','pliers', 'nailer', 'table saw') 35. Given the following list: Names = ['Dan', 'Mary', 'Bill', 'Juanita', 'Harry', 'Sarah'] Which of the following will change the list names to ['Dan', 'Mary', Juanita', 'Harry', 'Sarah') ? A. del Names[3] B. erase('Bill') C. Names.pop('Bill') D. Names.pop(-4) E. Names.insert(2, nothing)
Method or operator can be used to concatenate lists--- B. + operator is used to concatenate lists.
See below example
list1 = ["a", "b" , "c"]
list2 = [1, 2, 3]
list1 = list1+ list2
print(list1)
29:What will be the value of the variable list after the following code executes?
A. [1,2,3,10]
List index starts form 0. So the statement list[3]=10 will override the last element to 10.
30:Consider the following list: inventory = ["washer", "dryer", "microwave") Which of the following will display the item value, "dryer"?
B. print(inventory[1])
List index starts form 0. Below are indexes of list.
inventory[0]= "washer"
inventory[1]= "dryer"
inventory[2]="microwave"
Hence inventory[1] will print "dryer"
31: What will be the value of the variable list2 after the following code executes?
B. [1,2,3]
Elaborating it further:
# Initialize list1 to [1,2,3]
list1=[1,2,3]
# Initialize list2 as empty list
list2=[]
# Add all element of list1 to list2 one by one. So now list2 will become [1,2,3]
for element in list1:
list2.append(element)
# Change values of list1 to [4,5,6]. Remember this statement will not change values of list2. list2 will remain [1,2,3]
list1=[4,5,6}
32: Given that: aList = [1,2,3,4] which of the following will display the list [2,3,4] at the screen?
D. print(aList[-3:]
Here start index range is -3, that is 3rd element from end of list- that is 2.
And end index is not given in option D. That means all elements after the start index.
So we will get [2,3,4]
33:Given that: aList = [1,2,10,11,12,13] del aList[3] what will be printed by print (aList)
C. [1,2,10,12,13]
del aList[3] will delete element present at 3rd index. List index starts from 0. So this will delete 11 from list.
34:Given that: my_tools = ['hammer', 'screwdriver', 'wrench', 'pliers', 'nailer', 'table saw') my_tools[2:4]= ['chainsaw', 'chipper'] what will be printed by print
C. ['hammer', 'screwdriver', 'chainsaw', 'chipper', 'nailer', 'table saw']
my_tools[2:4]=["chainsaw","chipper"]
Index range [2:4] meanse index 2 and 3. That means element present at index 2 will be replaced by "chainsaw" .
And element present at index 3 will be replaced by "chipper"
35: Which of the following will change the list names to ['Dan', 'Mary', Juanita', 'Harry', 'Sarah')
D. Names.pop(-4)
Here we need to delete 'Bill' from the list.
Bill is present at index 2 in list. But there is no del or pop operation given for index 2.
Now if we take negative index from end of list, then 'Bill' is present at -4 index from end of list. So Names.pop(-4) will delete 'Bill'.
Learn more about concatenate lists:
brainly.com/question/13564830
#SPJ4
A utility company charges 8.2 cents/kWh. If a consumer operates a 60-W light bulb continuously for one day, how much is the consumer charged?
A utility company charges 8.2 cents/kWh. If a consumer operates a 60-W light bulb continuously for one day, he would charged 11.808 cents.
To calculate the amount of energy used, multiply the power by the length of time the bulb is on.
1.44 kWh is equal to W=pt=6024Wh=0.96kWh.
C = 8.2 cents multiplied by 0.96 to produce 11.808 cents.
There are 100 cents in a $1, hence a cent is one hundredth of a dollar. The cent, which equals one hundredth of the fundamental unit of currency, is also present in many other currencies, including those of the European Union, Estonia, and Hong Kong. Cent is derived from the Latin word centum, which means "hundred." Cent originally meant "one hundred" in Middle English, but by the 1600s it had changed to "one hundredth."
know more about power here:
https://brainly.com/question/19681698
#SPJ4
Roberto has been a hard-working and high-performing distribution specialist for a food distribution company. Based on his good performance and positive interpersonal skills, he is appointed as team leader of the group that distributes food to schools and hospitals. Several weeks into the job, Roberto notices that the team of workers is really not working much like a team. The team members each seem to do their own job acceptably, but there is not a high level of cooperation and coordination among them. Roberto has been somewhat successful in his preliminary attempt to move the group toward better teamwork. To help sustain the teamwork, Roberto is advised to use which approach to leadership
It is advised that Roberto use Participative or shared leadership. Better organisational performance results from shared leadership.
What is participatory shared leadership?Participative leadership is a leadership approach in which all team members collaborate to reach decisions. Due to the management teams' encouragement of participation from all staff members, participatory leadership is also referred to as democratic leadership.Sharing power and influence while keeping one person in control is known as shared leadership. Better organisational performance results from shared leadership. Transparency, promoting autonomy, and being receptive to other people's views all help to establish shared leadership.As a result of interactions between team members in which at least one team member tries to influence other team members or the team as a whole, shared leadership is also frequently understood as the serial emergence of several leaders during the life of a team.To learn more about shared leadership refer :
https://brainly.com/question/29031585
#SPJ1
this type of tolerancing is convient because a design may be initially drawn and dimensioned using basic size
A design may be drawn and dimensioned initially using basic size, making the plus-minus dimentions type of tolerance convenient.
There are no tolerances associated with basic dimensions because, in theory, they are perfect dimensions. An acceptable degree of dimensional variation that nevertheless permits an object to operate properly is referred to as a tolerance. Limit dimensions, unilateral tolerances, and bilateral tolerances are the three fundamental tolerances that appear on working drawings the most frequently. Between the upper (maximum) and lower (lowest) bounds, tolerance is the overall range within which a dimension may change. Tolerances are used to control the parts on production drawings because it is impossible to manufacture everything to an exact size. Being open-minded and tolerant means respecting and accepting other people's approaches in business, even if they conflict with what you believe or feel. unwilling to impose expectations, guidelines, or moral standards on other people
Learn more about tolerance here:
https://brainly.com/question/15149931
#SPJ4
Which of the following protocols or services would you associate with windows remote desktop services network traffic?
RDP
WTSP
WPA
NNTP
The protocol or service that you would associate with Windows Remote Desktop Services network traffic is Remote Desktop Protocol (RDP).
What is RDP?Remote Desktop Protocol (RDP) is a proprietary protocol developed by Microsoft that allows a user to connect to a remote computer and access its resources as if they were working on the local machine.
This is commonly used for remote administration or support of a computer
The other options you listed - WTSP, WPA, and NNTP - are not related to WRDSs.
RDP provides features such as support for high-resolution graphics, audio and video playback, and support for multiple monitors.
It can also be used to transfer files between the local and remote computers.
RDP is widely used in enterprise environments to allow remote access to workstations and servers, as well as for remote support and remote administration tasks.
It is also used by individuals to remotely access their home computers from other locations.
To Know More About local machine, Check Out
https://brainly.com/question/28458931
#SPJ4
FILL IN THE BLANK. material handling equipment that can follow multiple paths, move in any direction, and carry large loads of in-process inventory is most likely to be associated with a___layout
It is also known as line layout. The machines are placed along the product flow line, and it suggests that various procedures on raw materials are carried out in a specified order.
What inventory is most likely to be associated with a layout?Cellular manufacturing refers to a sort of layout in which machines are organized in accordance with the requirements of the processing needed for a collection of related items (component families). These collections are known as cells.
Therefore, material handling equipment that can follow multiple paths, move in any direction, and carry large loads of in-process inventory is most likely to be associated with a (process) layout.
Learn more about inventory here:
https://brainly.com/question/14184995
#SPJ1
Which of the following is NOT one of the steps in the risk management process? development Risk assessment Risk response control Risk response Risk identification Risk tracking
The following that is not one of the steps in the risk management process is risk tracing.
What is Risk Management Process?Risk management involves identifying, analyzing, and responding to risk factors that are part of an organization's life. Effective risk management means trying to control future outcomes as much as possible by being proactive rather than reactive. Effective risk management therefore has the potential to reduce both the likelihood of a risk occurring and its potential impact.
Responses to risks typically take one of the following forms:
Avoidance: Companies try to eliminate certain risks by eliminating their causes.Mitigation: Reducing the expected financial value associated with a risk by reducing the likelihood that the risk will materialize. Acceptance: In some cases, companies may be forced to take risks. This option is possible if the business unit is creating contingencies to reduce the impact of risk.Learn more about Risk Management Process https://brainly.com/question/21284739
#SPJ4
The storage service that is typically measured in average seconds per transaction and can also be qualified with respect to peak - and nonpeak - period response times is __________ .
Question 8 options:
manageability
responsiveness
availability
reliability
The storage service that is typically measured in average seconds per transaction and can also be qualified with respect to peak - and nonpeak - period response times is responsiveness.
Why is responsiveness important storage service?The term "storage as a service" (STaaS) refers to a subscription service model where a storage provider provides access to storage and compute resources both locally and/or remotely. Through operational expenditure (OPEX) agility, STaaS helps you save money because you only pay for the storage you really use. We'll get into what STaaS is, how it functions, and what it offers in this article. If you don't know how much capacity you'll need in the future, purchasing new storage can be a costly capital investment (CAPEX). Although you can try to foresee your company's expansion and make purchases accordingly, doing so can lock up cash that could be better used elsewhere in your company.
A business's capacity to respond to new development opportunities or successfully carry out its growth strategy is hindered or altogether blocked by the revenue delivery infrastructure is responsiveness gap. It results from the infrastructure for delivering revenue being behind the rest of the SaaS industry.
To know more storage service refer:
https://brainly.com/question/10674971
#SPJ4
which of the following can be used to manage policies and user rights for machines joined to a domain?Local Group Policy, Editor Group, Policy Management.
Local Group Policy Editor & Group Policy Management can be used to manage policies and user rights for machines joined to a domain.
What does Microsoft Group Policy management do?Within an Active Directory environment, you may manage the configurations of several users and machines using the Group Policy (GP) function of Windows. GP allows for the configuration of all Organizational Units, sites, or domains from a single, central location.The following new features are combined with the current Group Policy capability available in these tools in the GPMC to create a single console. a user interface that makes managing and using Group Policy objects more simple (GPOs). Copy, import, restore, and export Group Policy objects (GPOs).Start GPMC by performing the following: Click the Apps arrow on the Start screen. Enter gpmc.msc on the Apps screen, then choose OK or hit ENTER.Learn more about Group Policy Management refer to :
https://brainly.com/question/13437913
#SPJ4
In automation, _____ is the flow of information from the machine back to the sensor.
a. feedback
b. agrimation
c. input instruction
d. design
e. control mechanism
In automation, feedback is the information transfer from the machine to the sensor.
What is automation?
By predetermining evaluation method, subprocess relationships, as well as related actions as well as encoding those predeterminations in machines, automation refers to a broad range of technologies that minimise human intervention in processes. Automation has been accomplished using a variety of techniques, most frequently in combination, including mechanical, hydrological, pneumatic, electrical, digital equipment, and computers. Complex systems, including contemporary factories, aircraft, and ships, frequently combine all of these methods. Labor savings, waste reduction, electricity cost savings, material cost savings, and improvements to reliability, accuracy, and precision are all advantages of automation.
To learn more about automation
https://brainly.com/question/26102765
#SPJ4
2) explain how you can change the deterministic finite-state automaton m that accepts language l, so that the changed automaton recognizes the complement of the set l.
We can simply convert each final state to a nonfinal state and change each nonfinal state to a final state. In this case the changed automaton recognizes the complement of the set l.
What is automaton?An automaton is a relatively self-operating machine, or control mechanism, created to automatically carry out a set of tasks, or react to predetermined instructions. Some automata, like the bellstrikers in mechanical clocks, are made to appear as though they are driven by their own will to the untrained eye.
The phrase has a long history of being used to describe automatons that are made to amuse or impress people and that move like living, breathing humans or animals.
The portrayal of characters in movies and theme park attractions frequently uses animatronics, a modern type of automata with electronics.
Learn more about automaton
https://brainly.com/question/15049261
#SPJ4
How far ahead does the manual say you should look?
Answer: 12 to 15 seconds ahead
Explanation:
that means looking ahead the distance you will travel in 12 to 15 seconds. At lower speeds, that's about one block.
i hope this answers your question
What is NOT one of the three characteristics of TCP in its role as a reliable delivery protocol? Connection-oriented protocol Sequencing and checksums Framing Flow Control
C: Framing is not one of the three characteristics of TCP in its role as a reliable delivery protocol.
Transmission Control Protocol (TCP) is a standard that determines how to establish and maintain a network communication through which applications can exchange data. TCP works with the Internet Protocol (IP), which identifies how computers transfer packets of data to each other. TCP provides reliable delivery of data through flow control, checksum and sequencing information, and connection-oriented protocol. Thus, framing is not a characteristic of TCP in the process of reliable data delivery.
You can learn more about TCP at
https://brainly.com/question/14280351
#SPJ4
What is an electric circuit- Series and Parallel Circuits
An electric circuit is a closed loop in which electric current flows.
What is circuit?
Electronic components such as resistors, circuitry, capacitors, inductors, and diodes are connected by conductive cables or traces that allow electric current to flow between them. It is a specific kind of electrical circuit, and in order for a circuit to be called electronic rather than electrical, there usually needs to be at least each active component present. Signals can be amplified, calculations can be made, and data can be transported from one location to another thanks to the combination of factors and wires.
Electric current is generated by a power source, such as a battery, and can travel through conductors such as wires, before returning to the power source. Electric circuits can be divided into two types: series and parallel circuits.
A series circuit is a circuit in which all components are connected in a single loop, so that the same current flows through each part of the circuit. This means that the current passing through each component is the same, and the voltage across each component is the same.
A parallel circuit is a circuit in which components are connected side by side, so that each component is connected to the power source independently. This means that the current passing through each component can be different, and the voltage across each component can be different.
To learn more about circuit
https://brainly.com/question/29473253
#SPJ4
a quasi experiment with a treatement and a control group that measure the dependent variable before and after the treatment inquizitbe
The correct label for a quasi-experiment with a treatment and a control group that measures the dependent variable before and after the treatment is: "nonequivalent control group pretest/posttest design.
What is a quasi-experiment?A quasi-experiment is an empirical interventional research that uses random assignment to determine the causal influence of an intervention on a target population.
"Quasi-experimental research is comparable to experimental research in that an independent variable is manipulated." It is distinguished from experimental research by the absence of a control group, random selection, random assignment, and/or active manipulation.
The following are the most typical quasi-experimental designs: Nonequivalent groups design: In this design, participants take a pretest and a posttest to determine cause and effect.
Learn more about quasi-experiment:
https://brainly.com/question/9995163
#SPJ1
Full Question:
What is the the appropriate description.
a quasi-experiment with a treatment and a control - group that measures the dependent variable before and after the treatment?
The following Mohr's circle is for the outer surface of a thin-walled cylindrical pressure vessel. [1] represents _______.
14.3 #41
the out-of-plane Mohr's circles
The Mohr circle The subsequent Mohr's circle describes the out-of-plane surface of a cylindrical pressure tank with thin walls Mohr's. The following is the Mohr's Circle for in-plane stresses on the cylinder's outside surface for a cylindrical pressure vessel.
what about of Mohr's circle ?
An internal gauge is used on a cylindrical pressure vessel with a thin wall that has an interior diameter of 300 mm and a wall thickness of 3 mm. The transformation law for the Cauchy stress tensor is graphically represented as a circle in two dimensions by Mohr's circle.
because it makes it possible to see the connections between the normal and shear stresses acting at a particular place on multiple inclined planes in a strained structure. maximum shear stresses, inclination plane stresses, and stresses.
To learn more about Mohr's circles from given link
brainly.com/question/18372020
#SPJ4
2.4 Critical Thinking Challenge: Find the Perfect Video Conference...: Concepts Module 2: The Web:
Technology for Success:...
The correct answer is "Technology for Success - Computer Concepts".
Why Computer concepts?Module 2 of the "Technology for Success - Computer Concepts" section of this course eBook covered several topics related to the Web, including the Key Terms Download Key Termslisted at the end of the module.
This discussion assignment requires that you make an original post explaining in detail one of the key terms listed at the end of Module 2
Basic Concepts of Computer: A computer system is a combination of hardware and software. The physical and tangible parts/components of a computer that can be seen and touched are known as Hardware.
To Know More About Hardware, Check Out
https://brainly.com/question/3186534
#SPJ1
with a digital system, if you have measured incorrectly and use too low of a kvp for adequate penetration, what do you need to do with the next exposure
The x-ray beam's penetrating power is regulated by kVp (beam quality). Every time an exposure is conducted, the x-rays need to be powerful (enough) to sufficiently penetrate through the target area.
How does kVp impact the exposure to digital receptors?The radiation's penetration power and exposure to the image receptor both increase as the kVp value is raised.
Exposure to the image receptor is enhanced with an increase in kVp, right?Due to an increase in photon quantity and penetrability, exposure at the image receptor rises by a factor of five of the change in kVp, doubling the intensity at the detector with a 15% change in kVp.
To know more about kVp visit:-
https://brainly.com/question/17095191
#SPJ4
S-13. Determine the reactions at the supports. 900 N/m 600 N/Tm 3 m Prob. 5-13
The reactions at the supports. 900 N/m & 600 N/m Reaction at support A is 2175 N and Reaction at support B is 1875 N
∈fx = 0 =HB = 0
∈MA = 0
RBX 6 = 600 x 6 x 3 + 4 X 300 * 3X 1
RB = 1875N
∈fy = 0
RA + RB = 1/2X 300 X3 + 600 X 6
-> RA = 2175 N
Thus
Reaction at support A is 2175 N
Reaction at support B is 1875 N
A Reaction at support can be a force acting on a support or an end moment acting to restrict an object as a result of the movement being inhibited. When it comes to structural systems, support responses and the forces exerted on the structure are in equilibrium.
Learn more about Reaction at support here:
https://brainly.com/question/19260256
#SPJ4
Which describes the "Network Effect?"
A platform becomes more useful as its total computing power increases.
A platform becomes more useful as it is linked to more applications.
A platform can lose effectiveness if too many users are logged in simultaneously.
A platform becomes more useful as more people join and use it.
The network effect is a phenomenon whereby increased numbers of people or participants improve the value of a good or service.
What is network effect?A network effect is an economic phenomenon in which the value or utility obtained by a person from an item or service is dependent on the number of consumers of related goods. In general, network effects are positive, suggesting that as additional users join the same network, a specific user obtains more value from the product. According to the online course Economics for Managers, the network effect refers to any situation in which the value of a product, service, or platform is defined by the number of buyers, sellers, or users who use it.
To know more about network effect,
https://brainly.com/question/29603980
#SPJ4
