Answer:
don't know what to say about that
each multiwire branch circuit shall be provided with a means that will simultaneously disconnect all ungrounded conductors at the point where the branch circuit originates. t or f
According to the question, the given statement of conductors at the point where the branch circuit originates is true.
What is conductors?
Conductors are materials that allow the flow of electrical energy. They are typically made of materials that contain free electrons, such as metals, that can move around freely when an electrical charge is applied. Conductors are essential for the functioning of electrical circuits and are used in a variety of applications from electrical wiring to power transmission. In addition to metals, other materials like semiconductors, graphite, and liquids can also be used as conductors. Conductors have a wide range of uses and are necessary for any type of electrical device or system. They are also used in various fields like engineering, telecommunications, physics, and computer science.
To learn more about conductors
https://brainly.com/question/22754783
#SPJ4
2013 toyota venza forums i have a wiring harness that goes from inside to under the vehicle what do they go to
Toyota Venza 2013 Forums I have such a wiring network that covers some different sorts of electronic cables and runs from the inside to beneath the car.
What purpose does a wiring harness serve?A wire harness, sometimes referred to as a wiring, is an outer sheath created to shield particular electrical wire types from environment. The cables in wiring harnesses are generally shielded from the environment employing thermoplastic as well as thermoset materials.
What is a wiring harness for a vehicle?A wiring harness is a logical arrangement of wires, terminals, and connectors that runs all through the entire vehicle and transmits data and electrical power, effectively "connecting" a number of different components.
To know more about wiring harness visit:
https://brainly.com/question/28369617
#SPJ4
The plain view doctrine refers to the power of law enforcement to seize any contraband materials that are in plain view, even if the officers don't have a specific warrent for them. Consider the case when during a warrant house search, the law enforcement officers are looking for evidence of a digital crime involving credit card fraud. While in the house, they find no evidence of credit card fraud or any other crime that involves credit cards. While looking around they found various pirated movies and DVD duplication equipment. Can they seize this equipment and arrest the owners? Select one: a. No they can't because at that moment they can't tell if owners had the right to copy and distribute those movies can. The plain view doctrine applies and anything in plain site that is considered contraband materials can be seized a warrant search even if the warrant is not specifically for that material Ob. Yes they during c. No, they can't. The owners cannot be arrested because the warrant did not specifically stated they were looking for pirated (th movies d. Yes they can under the PATRIOT Act of 2001 e. No they can't do that because there is an amendment that protects the owners from illegal search and seizure
Option B is correct.
As already stated to seize any contraband material, even if they do not have a specific warrant. and this statement is also written in option B.
What do you mean by search warrant?It is best to look in a specific location for a specific item or set of items. A search warrant must be issued by a judge that specifies the precise location to be searched and the items to be seized.
The warrant also needs to state why the search is necessary. Although search warrants can be issued in civil cases as well, they are typically used in criminal investigations. A search warrant must include enough details to support a reasonable suspicion that the items listed there will be found during the search.
The warrant must also be properly served and executed, which requires that all instructions contained in the warrant's text be followed by the law enforcement officials executing it.
Learn more about search warrant refer :
https://brainly.com/question/6656767
#SPJ4
consider the following maze for the robot. write the code that will get the robot to its final position and direction. you should not repeat any code; use loops and functions instead.
An entity that repeats a series of embedded commands is said to be in a loop.
What do robotics loops do?Inform students: An entity that repeats a series of embedded commands is said to be in a loop. This is helpful if you want to instruct a robot to repeat a task repeatedly in an effective manner.Robots of the first generation are remote-controlled, those of the second generation are autonomous, such as cleaning robots, those of the third generation fall under the category of networks, while teleoperated and autonomous robots are two subclasses of networked robots, and robots of the fourth generation are starship delivery systems.REPEAT UNTIL (NOT CAN_MOVE(right))
{
IF (CAN_MOVE(forward))
{
MOVE_FORWARD()
}
IF (NOT CAN_MOVE(forward))
ROTATE_RIGHT()
MOVE_FORWARD()
}
}
To learn more about loops refer to:
https://brainly.com/question/26568485
#SPJ4
To help picture the electric field, we use what are called electric field lines.
An electric field lines is a line that always points along the direction of the electric field (i.e. downhill in the pictures we have been making).
They begin on positive charges and end on negative charges.
Two electric field lines cannot cross; at best they can meet on a charge.
The number of lines in a region is proportional to the magnitude of the E-field. (You should see more in the steep regions on the pictures we have been making).
The electric field lines are normal to (at right angles to) the equipotential surfaces. (This makes sense because electric field lines are along the direction of greatest change in the potential; while along the equipotential surfaces the potential doesn't change.)
Using the rules above, draw several (not just a few) electric field lines on all of your Wireframe Contour plots. Make sure your lines respect all of the above rules.
Idenify on these plots (or a copy thereof) where the electric potential is zero and where the elctric field is zero.
Electric field lines always point toward a negative point and away from a positive charge. In actuality, positive charges are where electric fields begin and negative charges are where they end.
The ability to see the electric field is made possible by electric field lines. Electric field lines feature arrows indicating the electric field's direction since the electric field is a vector. We demonstrate the electric field lines of a single point charge as well as a positive and negative charge as two instances.An electric field line is often a curve that has the tangent of each point pointing in the direction of that point's net field. To designate the direction of the electric field from the two potential directions provided by a tangent to the curve, an arrow on the curve is plainly required.
To learn more about electric fields click the link below:
brainly.com/question/15800304
#SPJ4
register the countchars event handler to handle blur changes for the input tag. note: the function counts the number of characters in the input.
Use the LEN function, which counts letters, digits, characters, and all spaces, to count the characters in a cell.
How do you calculate the character count?By choosing the "Review" tab and clicking "Word Count," you may determine the number of characters in a Word document. Both the total character count including spaces and the total character count excluding spaces are available.
What is counted by the count () function?The COUNT function counts the number of arguments in the list as well as the number of cells that contain numbers. To determine how many entries there are in a number field that is a part of a range or array of numbers, use the COUNT function.
To know more about register visit:-
https://brainly.com/question/24188927
#SPJ4
most operating systems have a gui as part of their system. which of the following best describes an operating system's gui?
A user-friendly interface that lets users interact with the system through icons and other visual elements.
Which is the best GUI?PyQt5, developed by Riverbank Computing, is one of the most widely used Python graphical user interface frameworks. The Qt framework, a cross-platform framework for developing applications for a variety of platforms, is the foundation of the PyQt package.
Which of the four characteristics of a graphical user interface (GUI) can you name?Windows, Icons, Menus, and a Pointer are the four main components that make up a GUI's four features. They are also the Interface's Main Components, or the WIMP system. MS-DOS. MS-DOS is not an operating system with a GUI.
To know more about visual elements visit :-
https://brainly.com/question/12835892
#SPJ4
Consider a device which takes three inputs A, B and C and has one output, Z. It is to output a B if A=1 and it is to output C if A=0. So if A=1, B=0 and C=1 the output should be "0".
a) Write a truth table for this device.
A truth table has a final column that displays all the outcomes of the logical process the table represents
What is the truth table.A truth table has a final column that displays all the outcomes of the logical process the table represents, with one column for each input variable (for instance, A and B) (for example, A XOR B).
A truth table is a tabular representation of all the possible input and output value combinations. The name refers to a mathematical table that displays all potential outcomes from all plausible situations that are thought to be true.
A B C Y
0 0 0 1
0 0 1 0
0 0 0 1
On simplifying
Y = AB + BC + AC = 0
To learn more about truth table refer to:
https://brainly.com/question/28032966
#SPJ4
As shown, a pipe is anchored to a wall at point A. (Figure 2) During the pipe's installation, several forces are applied to the pipe at different locations. If F1 = 18.8lb , F2 = 17.1lb , F3 = 19.9lb , F4 = 15.9lb , d1 = 0.350ft , d2 = 0.900ft , and d3 = 0.900ft , what is MRA, the net moment about point A due to these forces? Assume that moments acting counterclockwise about point A are positive whereas moments acting clockwise are negative.
The net moment about point A due to these forces is 41.93 lb-ft MRA.
What is forces?
Forces are a type of interaction between objects that changes their motion or the shape of the objects. Forces can be divided into two categories: contact forces and non-contact forces. Contact forces include friction, tension, normal force, and applied force, while non-contact forces include gravity, magnetism, and electrostatic force. Forces can cause objects to accelerate, decelerate, or change direction. The strength of a force is determined by its magnitude, which is measured in newtons. Forces play a major role in many aspects of our everyday lives, from holding objects together to the motion of vehicles.
MRA = (18.8 × 0.35) + (17.1 × 0.90) + (19.9 × 0.90) + (15.9 × 0)
= 8.93 + 15.19 + 17.91 + 0
= 41.93 lb-ft
To learn more about forces
https://brainly.com/question/13441224
#SPJ4
a structural steel bar with 4.0 in x 0.875 in. rectangular cross section is subjected to an axial load of 45 kips. determine the maximum normal and shear stresses in the bar.
The maximum normal stress in the bar is 29.93 ksi and the maximum shear stress in the bar is 7.48 ksi.
To determine the maximum normal stress in the bar, we can use the formula:
σ_x = P/A
Where P is the axial load, A is the cross-sectional area of the bar, and σ_x is the normal stress in the bar.
A = bh
A = 40.875 = 3.5 in^2
σ_x = P/A
σ_x = 45000/3.5 = 12,857.14 psi = 12.857 ksi
To determine the maximum shear stress in the bar, we can use the formula:
τ_max = V/(bh/2)
Where V is the maximum shear load, b is the width of the cross-section, h is the height of the cross-section and τ_max is the maximum shear stress in the bar.
V = P/2
V = 45000/2 = 22500
τ_max = V/(bh/2)
τ_max = 22500/(4*0.875/2) = 7.48 ksi
For more questions like Shear stress click the link below:
https://brainly.com/question/14946878
#SPJ4
consider the following class definitions. public class menuitem { private double price; public menuitem(double p) { price
As a result of running the code segment, 6.5 will be printed.
What distinguishes a static method from an instance method in the most basic sense?Which will only have one instance for a class is a static method. However, depending on the quantity of instances of that class produced, instance methods exist in multiple versions. By using a class reference, static methods can be called. Object references are used to call instance or non-static methods.
What sort of instance variable is that?A specific instance of a class is only applicable to instance variables. Instance variables, for instance, are duplicated each time a new class object is created. Variables designated as instance variables are those that are declared inside a class but outside of any methods.
To know more about code visit :-
https://brainly.com/question/17293834
#SPJ4
A 3 MW wind turbine was installed in an on-land location where the capacity factor was measured to be 22 percent. YOUR TURN 1. How much electricity will this wind turbine generate in a year? 2. How much revenue would a utility receive if they were paid $0.05/kwh for this electricity?
An average onshore wind turbine with a capacity of 2.5–3 MW can produce more than 6 million kWh in a year – enough to supply 1,500 average EU households with electricity.
Define Electricity?
Electricity is the flow of electrical power or charge. It is a secondary energy source which means that we get it from the conversion of other sources of energy, like coal, natural gas, oil, nuclear power and other natural sources, which are called primary sources.
The flow of charges in a conductor is defined as electricity. Charges are transferred from one end of the terminal to the other. It usually progresses from a positive to a negative terminal. The electrons travel freely within the body since the nucleus holds them loosely.The outer shells can hold even more. Some atoms with many protons can have as many as seven shells with electrons in them. The electrons in the shells closest to the nucleus have a strong force of attraction to the protons.To learn more about electricity refers to:
https://brainly.com/question/16554209
#SPJ4
Over 6 million kWh can be produced annually by an onshore wind turbine with a capacity of 2.5–3 MW, which is sufficient to power 1,500 typical EU households.
What is electricity?
The movement of electrical power or charge is called electricity. It is a secondary energy source, which means that it comes from the conversion of primary energy sources like coal, natural gas, oil, nuclear power, and others.
Electricity is the flow of charges in a conductor. The terminal moves charges from one end to the other. In most cases, it moves from a positive terminal to a negative terminal. Because the nucleus holds the electrons loosely, they can move around the body freely.
Even more can fit inside the outer shells. There may be as many as seven electron-filled shells in some atoms with many protons. Protons are strongly attracted to the electrons in the shells closest to the nucleus.
Learn more about electricity:
brainly.com/question/24786034
#SPJ4
where is the resume document located in this file structure
The "resume" has been located in the "Documents" just according to the file structure.
What is the information given in the program?Given the information C:/Users/Documents/resume.docx, this can be interpreted as Documents is in the Users folder and the resume can be found in the Document folder.
As we can say also say that the document folder was created by the user and the "resume" file is placed directly into the documents. Based on the explanation, we can say that the "resume" is located in the "Documents" according to the file structure.
Therefore, The "resume" has been located in the "Documents" just according to the file structure.
Learn more about file structure on:
https://brainly.com/question/14283055
#SPJ1
A current of 20mA is Sent on a transmission line of length 10km attenuation constant of 0.1neper and phase Constant & of 0.05rad If the receiving and is short Cran estoy dot the (1) Received voltage the form (i) received current
When a signal travels via a transmission line, its amplitude lowers.
What do you mean by attenuation constant?The phrase "attenuation constant" in communications refers to the attenuation of an electromagnetic wave travelling through a medium per unit distance from the source, also known as an attenuation parameter or attenuation coefficient. The unit of measurement is nepers per metre and refers to the real portion of the propagation constant.
Although we frequently convert to dB/meter in microwave engineering, the attenuation constant's natural units are Nepers/meter. Nepers/length must be multiplied by 8.686 to obtain loss in dB/length.
The signal's amplitude lowers as it travels through a transmission line. The symbol is used to represent it. 2. Phase sensitivity It is a part of the propagation constant that is fictitious.
To learn more about attenuation constant refer to:
https://brainly.com/question/17374622
#SPJ1
where can you find a geological formation nicknamed the chocolate hills?
The Chocolate Hills are a geological structure in the Philippines' Bohol province (Mga Bungtod sa Tsokolate in Cebuano, Mga Tsokolateng Burol in Tagalog). There are at least 1,260 hills, but there could be as many as 1,776 hills located throughout a region of more than 50 square kilometres (20 sq mi).
What city are the Chocolate Hills in?In Bohol, there are numerous villages where the Chocolate Hills may be found, including Bilar, Carmen, Butuan, and others. The viewing platform that tourists most frequently use to view these mounds is called the Chocolate Hills Complex, and it's situated in Carmen.
How did the Chocolate Hills form?The inscription on the bronze plaque reads: "The distinctive terrain structure known as the Chocolate Hills of Bohol was produced centuries ago by the elevation of coral deposits and the activity of tectonic forces."
To know more about Tsokolateng Burol visit:
https://brainly.com/question/24197255
#SPJ4
part a: design and conduct a simulation to estimate the likelihood that the professional golfer will sink at least four holes-in-one during a single game. be sure to explain the representations and show all the work for your trials and outcomes. (6 points)
Come up with a simulation. Create and run a simulation to determine the probability that the golfer will complete at least two holes-in-one in a single game. Verify that you have completed all of the five simulation-related stages.
What in probability is a simulation?Simulating entails employing a probability model to feign a random event, typically on a computer. We can simulate outcomes and event occurrences using a probability model.
What is the likelihood that a player in a round of golf has 0 or 1 hole in one?In a single game of golf, there is a zero (or 25%) chance that the player will get 0 or 1 hole-in-one. Two out of the eight games meet this requirement, thus we know this.
To know more about simulation visit :-
https://brainly.com/question/16359096
#SPJ4
The sign has a mass of 90 kg with center of mass at G. (Figure 1) Determine the x, y, z components of reaction at the ball-and-socket joint A. Enter the x, y, and z components of the reaction using three significant figures separated by commas. Determine the tension in wires BC and BD. Express your answer using three significant figures separated by a comma. The sign has a mass of 90 kg with center of mass at G. (Figure 1) Determine the x, y, z components of reaction at the ball-and-socket joint A. Enter the x, y, and z components of the reaction using three significant figures separated by commas. Determine the tension in wires BC and BD. Express your answer using three significant figures separated by a comma.
the x, y, z components of reaction at the ball-and-socket joint A is:
Ax = 0 N
Ay = 529.74 N
The tension in wires BC and BD is:
Az = 441.45 N
TBD =264.87 N
Tbc = 529.71 N
What is center of mass at G?The point through which gravity acts on an object or system is known as the centre of gravity. The gravitational field is assumed to be uniform in most mechanics problems. The centre of mass and the centre of gravity are then in the same location.
In physics, the centre of gravity is a hypothetical location within a mass of matter where, for the sake of convenience in some calculations, the mass's total weight may be assumed to be concentrated.
In astronomy and astrophysics, the centre of mass—also known as the barycenter—plays a significant role. The barycenter is the location where two objects balance one another; it is the centre of mass where two or more celestial bodies orbit one another.
To learn more about mass refers to:
brainly.com/question/19385703
#SPJ4
Given the truss shown, with the dimensions and loads provided, find the force carried in members bc, bi, ij, de, dg, gh, and eg.
The two supports at A and D apply these reaction forces to the truss in order to maintain its stability.
What are a Truss' member troops consist of?
A truss is made up of several components that are typically joined together by pins. On the joint, there are loads or forces at work. This causes internal loadings, such as tensile or compressive force, on its members. One approach to figuring out these member forces uses the method of joints. This approach treats the joint as a location where forces are being applied to it. The system won't move unless the sum of forces acting along the x and y axes is equal to zero.
In a truss, how many forces are there?
Basic trusses are constructed from only two-force elements, with frictionless pins acting as the joints.
To know more about Truss forces visit:
https://brainly.com/question/13441224
#SPJ4
Use Kruskal's Algorithm to find a) a minimum spanning tree and b) the cost of the minimum spanning tree for the following graph.
FULL SOLUTION IN THE IMAGES..
To know more about spanning visit:
https://brainly.com/question/16245954
#SPJ4
Which of the following commands can be used to remove a group from a Linux system? (Choose all that apply.) a. rmgroup b. rmg c. groupdel d. delgroup
a. rmgroup and c. groupdel. rmgroup is a command used to remove a group from a Linux system. The command removes the specified group from the system, as well as any users that belong to the group.
What is system?System is a set of interrelated components working together to achieve a common goal. It is a cohesive conglomeration of various components, which interact with each other to form a complex whole. A system can be defined as a group of elements that cooperate and interact with each other in a coordinated manner to achieve a specific purpose.
groupdel is a command used to delete a group from the system. The command deletes the specified group and any users that belong to the group.
To learn more about system
https://brainly.com/question/28717367
#SPJ4
Assume that the two-terminal circuit element in Fig. 1.5 of the text has the following voltage and current waveforms:v(t) = (5 + 3 cos(120πt) + 5 cos(240πt)) V,i(t) = (3 + 6 cos(120πt) + 2 cos(360πt)) ADetermine the average power P absorbed by the element.**Note that the figure in the text is just a black box diagram with total voltage v(t) and positive current i(t). It also states that p(t)=v(t)*i(t).
The total voltage in a series circuit is the sum of each of the circuit's individual voltage drops. In a series circuit, a difference in potential is created across each resistor as current flows through them.
The instantaneous voltage drop across an inductor is inversely correlated with the rate at which the current through the inductor changes. V = L (di/dt) represents the mathematical relationship. Instrument transformers of the voltage transformer (VT) and potential transformer (PT) variety are parallel-connected. They are made to put a minimal load on the supply being measured and have a precise voltage ratio and phase relationship to allow for precise secondary connected metering.
To know more about voltage from the given link
https://brainly.com/question/13577056
#SPJ4
A rectangular brick-lined channel (n = 0.016) of 4.0-m width is laid on a bottom slope of 0.0009. It carries a discharge of 15 m3 /s and the fl ow is non-uniform. If the depth at a Section A is 2.6 m, calculate the depth at section B, 500 m downstream of A, by using (a) only one step, and (b) two steps.
Answer:
To calculate the depth at section B, 500 m downstream of section A, we can use the Chezy formula:
V = C*R^(1/2)
Where V is the velocity, C is the Chezy coefficient, and R is the hydraulic radius.
a) Using only one step:
Since the flow is non-uniform, the velocity at section B can be assumed to be the same as at section A. Therefore, the depth at section B can be calculated using the same Chezy coefficient and hydraulic radius as at section A.
Hydraulic Radius (R) = A/P = (width * depth) / 2
R_A = (4 * 2.6) / 2 = 5.2 m
R_B = R_A = 5.2 m
Chezy coefficient (C) = (V^2 * n) / (2 * g * R^(1/2))
C = (15^2 * 0.016) / (2 * 9.81 * 5.2^(1/2)) = 1.94
Now we can use the Chezy formula to calculate the depth at section B
V = C*R^(1/2)
V = 1.94 * 5.2^(1/2) = 3.23 m/s
b) Using two steps:
First, we can calculate the velocity at section B using the continuity equation:
Q = A1 * V1 = A2 * V2
15 = (4 * 2.6 * 3.23) = (4 * y * V2)
V2 = (15 / 4) / y = 3.75/y m/s
Next, we can use the Chezy formula and the velocity at section B to calculate the depth at section B:
V = C*R^(1/2)
y = V^2 * n / (C^2 * g)
y = (3.75/y)^2 * 0.016 / (1.94^2 * 9.81)
y = 2.34 m
So, the depth at section B is 2.34 m by using two steps.
Note: The above calculations are based on the assumption that the slope is uniform along the channel and the flow is steady. In practice, other factors such as channel roughness and boundary conditions may also have an impact on the depth of flow.
Worth 3 Points 0 You are given a class named Clock that has three instance variables: One of type int called hours, another of type boolean called isTicking, and the last one of type int called diff. Write a constructor for the class Clock that takes three parameters-an int, a boolean, and another int. The constructor should set the instance variables to the values provided. 1- public ClockOt nt hours, diff; boolean isTicking; 4 66 characters 5000 maximum Previous Submissions Clear x Code Analysis: Logic Error(s) Remarks and Hints Your constructor seems to have the wrong number of parameters. To create an Integer object you would have to use the new keyword. You almost certainly should be using:
A constructor is a specific function that is used to initialize objects in Java. The constructor is called whenever a class object is created.
What is the name of the constructor for the clock class?
general Clock (int hours, boolean isTicking, int diff) this. hours equal hours. isTicking is equal to this. new Integer (diff) = diff.
What is the constructor for the distinct types of int value hours, boolean value isTicking, and integer value diff?
This.hours = hours; This.isTicking = isTicking;
This.diff = new Integer (diff); public class Clock; Private int hours; Private boolean isTicking; Private Integer diff; Public Clock (int hours; boolean isTicking; int diff);
This.hours = hours; This.isTicking = isTicking; This.diff = diff; public Clock (int hours, boolean isTicking, int diff);
To know more about Constructors visit:
https://brainly.com/question/13853177
#SPJ4
Where the serving gas supplier delivers gas at a pressure greater than 2 psi for piping systems serving appliances designed to operate at a gas pressure of 14 inches of water column or less a ______ shall be installed.A) Pressure RegulatorB) Shut off ValveC) Overpressure protection deviceD) Sediment trap
For piping systems serving appliances intended to operate at a gas pressure of 14 inches w.c. or less, overpressure protection devices must be fitted when the serving gas source provides gas at a pressure greater than 2 psi.
The standard delivery pressure, or 1/3 pound-per-square-inch gauge, is usually used by residential single-family and multi-family building natural gas piping systems. An operational pressure-rated system that is rated at less than 0.5 psig must be capable of withstanding a test pressure of at least 5 psig for 30 minutes. The gas piping must withstand a pressure of at least 10 psi (69 kPa) gauge pressure during this inspection, which also includes a pressure test using air, CO2, or nitrogen.
To know more about pressure from the given link
https://brainly.com/question/28012687
#SPJ4
Create a static method that: is called remove All • returns nothing • takes two parameters: an ArrayList of Strings called wordList, and a String called targetWord This method should go through every element of wordList and remove every instance of targetWord from the ArrayList. Create a static method that: • is called appendPossum • returns an ArrayList • takes one parameter: an ArrayList of Integers . This method should: Create a new ArrayList of Integers Add only the positive Integers to the new ArrayList • Sum the positive Integers in the new ArrayList and add the Sum as the last element For example, if the incoming ArrayList contains the Integers (4.-6,3,-8,0,4.3), the ArrayList that gets returned should be (4.3,4,3,14), with 14 being the sum of (4.3,4,3). The original ArrayList should remain unchanged.
The answer provided below has been developed in a clear step by step manner.
Answer:
#include "linked_list.h"
#include <iostream>
using namespace std;
Linked_List::Linked_List(){
length = 0;
head = nullptr;
}
int Linked_List::get_length(){
return this->length;
}
unsigned int Linked_List::push_front(int new_val){
length ++;
Node *new_node = new Node(new_val, head);
head = new_node;
return length;
}
unsigned int Linked_List::push_back(int new_val){
length ++;
if (head == nullptr){ //if it's empty
head = new Node(new_val, nullptr);
}
else{
Node *temp = this-> head; //start from head
while (temp->next != nullptr){
temp = temp->next; //scrolling till the very end
}
//inserting it at the end:
Node *new_node = new Node(new_val, temp->next);
temp-> next = new_node;
}
return length;
}
unsigned int Linked_List::insert(int new_val, unsigned int index){
length++;
Node *temp = new Node(new_val, NULL);
if (index == 0){
temp->next = this->head;
head = temp;
return length;
}
else{
temp = this-> head;
//temp -> val = new_val;
int check = index-1;
for (int i = 0; i< check; i++){
temp = temp->next;
}
Node *new_node = new Node(new_val, temp->next);
temp-> next = new_node;
}
return length;
}
void Linked_List::print(){
Node *temp = this->head;
while (temp != nullptr){
cout << temp->val << " ";
temp = temp->next;
}
cout << endl;
}
void Linked_List::clear(){
delete head;
}
void Linked_List::delete_all_nodes(){
length = 0;
Node* next = nullptr;
Node* temp = head;
while (temp != nullptr){
next = temp->next;
free(temp);
temp = next;
}
head = nullptr;
}
Linked_List::Linked_List(const Linked_List& old_list){
cout << "Invoked the copy constructor!" << endl;
this-> length = old_list.length;
this-> head = nullptr;
Node *temp = old_list.head;
while(temp != nullptr){
Node *test = new Node(temp->val, temp->next);
if (this->head == nullptr){
this->head = test;
}
temp = temp->next;
}
}
Linked_List& Linked_List::operator=(const Linked_List& old_list){
cout << "Invoked the overloaded assignment operator" << endl;
this-> length = old_list.length;
this-> head = nullptr;
Node *temp = old_list.head;
while(temp != nullptr){
Node *test = new Node(temp->val, temp->next);
if (this->head == nullptr){
this->head = test;
}
temp = temp->next;
}
return *this;
}
void Linked_List::check_for_prime(){
int counter = 0;
bool flag = true;
Node *temp = this->head;
while (temp != nullptr){
// this assignment requires that a negative number is never considered to be prime. 0 and 1 are also not considered as prime numbers
if (temp->val > 1){
for (int i = 2; i <= temp->val/2; i++){
if (temp->val % i == 0){ // here we check if there is such number that fully divides our value
flag = false;
break;
}
}
if (flag == true){
counter++;
}
else{ flag = true; }
}
temp = temp->next;
}
cout << "You have " << counter << " prime number(s) in your list. (that's the total number of prime numbers) " << endl;
}
/*
merge_sort(head){
1) check if length <= 1 if so return
2) split unsorted list in half
3) first = merge_sort(first half)
4) second = merge_sort(second half)
5) merge(first, second)
}
*/
Node* merge_sort(Node* head){
Node *temp = head;
int length = 0;
while (temp != nullptr){
temp = temp -> next;
length ++;
}
if (length <= 1){
return head;
}
temp = head;
for (int i = 0; i< ((length-1)/2); i++){
temp = temp -> next;
}
Node *second = temp-> next;
temp-> next = NULL;
temp = head;
head = merge_sort(head);
second = merge_sort(second);
return merge(head, second);
}
Node* merge(Node* first, Node* second){
Node* result = nullptr;
if (first == nullptr){
return second;
}
else if (second == nullptr){
return first;
}
if (first->val <= second->val) {
result = first;
result->next = merge(first->next, second);
}
else{
result = second;
result->next = merge(first, second->next);
}
return result;
}
void Linked_List::sort_ascending(){
if (head == nullptr){
return;
}
head = merge_sort(head);
}
void swap_nodes(Node** head, Node* currX, Node* currY, Node* prevY){
// make 'currY' as new head
*head = currY;
prevY->next = currX;
Node* temp = currX->next;
currX->next = currY->next;
currY->next = temp;
}
Node* selection_sort(Node* head){
// if there is only a single node
if (head->next == NULL){
return head;
}
Node* min = head;
Node* beforeMin = NULL;
Node *temp = head;
while (temp->next != nullptr){
if (temp->next->val >= min->val) {
min = temp->next;
beforeMin = temp;
}
temp = temp->next;
}
if (min != head){
swap_nodes(&head, head, min, beforeMin);
}
// recursively sort the remaining list
head->next = selection_sort(head->next);
return head;
}
void Linked_List::sort_descending(){
if (head == nullptr){
return;
}
head = selection_sort(head);
}
void Linked_List::list_revese(){
Node *temp = head->next;
Node *prev = head;
Node *next = NULL;
head->next = NULL;
while (temp != nullptr){
next = temp->next;
temp->next = prev;
prev = temp;
temp = next;
}
head = prev;
}
To know more about Array List visit:
https://brainly.com/question/17265929
#SPJ4
a clutch is required for an electric motor transmitting 25 hp at 800 rpm. the clutch will be clamped directly to the motor plate housing and will have the same housing diameter as the motor, which is 5.5 in. the minimum radial tolerance between the outside diameter of the housing and the outside diameter of the clutch disc is 0.25 in. the clutch output shaft has the same diameter as the motor shaft, which is 0.625 in. design a multiple disc clutch for this application. define the assumptions and design options. specify the clutch material, outer disc radius, inner disc radius, and required applied force.
When applying the uniform wear hypothesis, we assume a lower torque carving capability for the specified dimensions to be on the safe side. When a clutch is brand-new, it will only have a little increase in torque carrying ability.
An automotive vehicle's multi-plate clutch increases the amount of power sent from the engine to the transmission shaft while also making up for torque loss brought on by slippage. Heavy equipment, commercial vehicles, special purpose military vehicles, racing automobiles, and motorbikes all employ this clutch. The following fundamental factors are covered while designing clutches: friction components during engagement, friction material, single- or multi-plate designs, cooling methods, and hardware. Each is examined in turn after an explanation of clutch engagement operation. The friction liner of the disc has a coefficient of friction of 0.25. The friction lining's bore radius is 25 mm.
To learn more about torque click the link below:
brainly.com/question/25708791
#SPJ4
Write a program that will display the top 3 items of your life bucket list (ex. life ambitions). Save the class as LifeBucketList.java. The output should have one line for each item and look something like this: Ride a rocket to space. See all 50 states in the USA. Travel to Fiji and get an ice cream. Also ensure that the following requirements are met: 1) Java file is named correctly. 2) Name, date and assignment information is included at the top of your Java code file as a comment. 3) Java code is properly indented and readable. 4) Code comments are present within each major section of code. 5) Use 3 separate println() statements within your program to achieve the required output.
A language for object-oriented programming is Java. The classes and objects in Java, together with their characteristics and methods
What is Java with example?
A language for object-oriented programming is Java. The classes and objects in Java, together with their characteristics and methods, are the foundation of everything. For instance, an automobile is an item in the actual world. The automobile contains characteristics like weight and colour, as well as functions like drive and brake.
// Substitute appropriate type.
ArrayList<...> a = new ArrayList<...>();
// Add elements to list.
// Generate an iterator. Start just after the last element.
ListIterator li = a.listIterator(a.size());
// Iterate in reverse.
while(li.hasPrevious()) {
System.out.println(li.previous());
}
To learn more about Java refer to:
https://brainly.com/question/26789430
#SPJ4
How do you find the mechanical advantage of a screw?
The mechanical benefit of utilising a screw is that it distributes the force across a greater area, enabling big loads to be overcome with less force.
In other words, if you can twist a screwdriver with 1N of force, you can create 4N of force.
Step 1 is to measure the screw head's circumference.
Step 2: Calculate the thread pitch to determine the linear distance the screw would travel if it were twisted just once.
Step 3: To determine the mechanical advantage, divide the screw head's circumference by its pitch.
Screw: A screw is a straightforward device that consists of a cylindrical post that has a ridge wrapped around it in a helix pattern. The screw travels into the target material as far as the space between the threads after being spun once.
Learn more about Screw here:
https://brainly.com/question/15229241
#SPJ4
Complete the lookup expression. The lookup should output IP, EMAIL, and DEPT values as ip, email, and dept. These lookup output fields should overwrite existing fields. | lookup newEmployees.csv USERNAME as Username
a) | lookup newEmployees.csv USERNAME as Username OUTPUT lower(IP,EMAIL,DEPT)
b) | lookup newEmployees.csv USERNAME as Username OUTPUT IP as ip, EMAIL as email, DEPT as dept
c) | lookup newEmployees.csv USERNAME as Username OUTPUTNEW lower(IP,EMAIL,DEPT)
d) | lookup newEmployees.csv USERNAME as Username OUTPUTNEW IP as ip, EMAIL as email, DEPT as dept
b) | lookup newEmployees.csv USERNAME as Username OUTPUT IP as ip, EMAIL as email, DEPT as dept
A lookup table can be created from any search you've conducted using the outputlookup command.
How does Splunk define outputlookup? A lookup table can be created from any search you've conducted using the outputlookup command. In order to enable the data to be accessed later using an inputlookup command, this command converts search results into lookup tables.You can add a field from an external source using Splunk Lookup if the value in the event data matches the field you want to add. While comparing various event fields, it enhances the data. Many event fields and destination fields can be input into the Splunk lookup command.A lookup table can be created from any search you've conducted using the outputlookup command.To learn more about outputlookup refer to:
https://brainly.com/question/30154192
#SPJ1
Translate each of the following English statements into logical expressions. The domain of discourse is the set of all real numbers. (a) The reciprocal of every positive number less than one is greater than one. (b) There is no smallest number. (c) Every number other than 0 has a multiplicative inverse.
The correct answer is (A) Every positive number less than one has a reciprocal that is bigger than one.
Every positive number less than one has a counterpart that is bigger than one. If p is a positive number, then 1/p is p's reciprocal. Its reciprocal is 1 if the number is 1. However, if it is higher than 1, its reciprocal is lower than 1. Keep in mind that a fraction's product with its reciprocal is always 1. Consider the denominator of a whole number to be 1, in this case: 1/5 is the reciprocal of 5. When multiplying two numbers, the signs of the two numbers must match for the result to be positive. The sign of reciprocals must be the same. Keep the same sign while inverting the fraction to determine the reciprocal.
To learn more about reciprocal click the link below:
brainly.com/question/18634761
#SPJ4
