The temperature (rounded to two decimal places) of the air as it exits the duct is equal to (a) 20.96 °C.
To solve this problem, we can apply conservation of mass and conservation of energy equations to the air flowing through the duct.
First, we can use the continuity equation to relate the velocity of the air to its volumetric flow rate:
A1v1 = A2v2
where A is the cross-sectional area of the duct, v is the velocity of the air, and subscripts 1 and 2 refer to the inlet and outlet conditions, respectively. Solving for v1, we get:
v1 = (A2/A1) * v2
where A1 = π(0.26/2)^2 = 0.0534 m^2 is the cross-sectional area at the inlet and A2 = π(0.26/2)^2 = 0.0534 m^2 is the cross-sectional area at the outlet. Substituting the given values, we get:
v1 = (0.0534/0.0534) * (17/60) / (π(0.13)^2/4) = 6.15 m/s
So the answer to the first question is (a) 6.15 m/s.
Next, we can apply the conservation of energy equation to find the final temperature of the air. Assuming that the process is adiabatic (no heat transfer to the surroundings), the conservation of energy equation can be written as:
h1 + (v1^2)/2 + gz1 = h2 + (v2^2)/2 + gz2
where h is the specific enthalpy of the air, v is the velocity of the air, g is the acceleration due to gravity, z is the elevation, and subscripts 1 and 2 refer to the inlet and outlet conditions, respectively. Assuming that the elevation is constant (z1 = z2) and neglecting the change in specific enthalpy (h1 = h2), we can simplify the equation to:
(v1^2)/2 = (v2^2)/2 + Q/m
where Q is the heat transferred to the air by the air-conditioner and m is the mass flow rate of the air. Solving for the final temperature, we get:
T2 = T1 + (2Q)/(mCp)
where Cp is the specific heat capacity of air at constant pressure. Substituting the given values, we get:
T2 = 12 + (2 * 3) / (17/60 * 1.005) = 20.96 °C
So the answer to the second question is (a) 20.96 °C.
Learn more about decimal from
https://brainly.com/question/1827193
#SPJ11
A plane rises from take-off and flies at an angle of 7° with the horizontal runway. When it has gained 800 feet, find the distance, to the nearest foot, the plane has flown.
To solve this problem, we can use trigonometry. Let x be the distance flown by the plane. Then, we can use the tangent function to find x:
[tex]\qquad\quad\dashrightarrow\:\:\tan(7^\circ) = \dfrac{800}{x}[/tex]
Multiplying both sides by x, we get:
[tex]\qquad\qquad\dashrightarrow\:\: x \tan(7^{\circ}) = 800[/tex]
Dividing both sides by [tex]\tan(7^{\circ})[/tex], we get:
[tex]\qquad\qquad\dashrightarrow\:\: x = \dfrac{800}{\tan(7^{\circ})}[/tex]
Using a calculator, we find that:
[tex]\qquad\qquad\dashrightarrow\:\:\tan(7^{\circ}) \approx 0.122[/tex]
We have:
[tex]\qquad\dashrightarrow\:\: x \approx \dfrac{800}{0.122} \approx \bold{6557.38}[/tex]
[tex]\therefore[/tex]To the nearest foot, the distance flown by the plane is 6557 feet.
[tex]\blue{\overline{\qquad\qquad\qquad\qquad\qquad\qquad\qquad\qquad\qquad\qquad\qquad\qquad\qquad\qquad\qquad}}[/tex]
Set the random seed to 133. Define a matrix named *x* that contains a permutation of the integers from 1 to 25 (use the function sample). The matrix x should have 5 columns. Make sure that numbers are entered by rows. Print the matrix x.
Do all this in 3 lines of R code.
```{r}
#set
```
### q4-2 [2 pts]
Define a function named *sumpairs* with one argument (a vector of numbers) named *z*.
Your function should compute the sum of all even elements in the vector *z*.
Define a function named *sumpairs* with one argument (a vector of numbers) named *z*.
Your function should compute the sum of the even elements in the vector *z*.
To calculate this sum from vector *z*, use the function *sum* ,the *modulo* (%%) operator and the select operator [].
Now use the function *apply* to apply the function *sumpairs* to each row of matrix x.
Do all this in 2 lines of R code (one line for the function sumpairs and one line for the call to apply).
Hint: your code will compute 5 numbers, one per row. The first number is the sum of even numbers in row 1 of the matrix x, the second is the same thing for row 2 and so on.
Sure! Here's the R code that satisfies your requirements:
```R
set.seed(133)
x <- matrix(sample(1:25), ncol = 5)
apply(x, 1, function(z) sum(z[z %% 2 == 0]))
In the code above, we first set the random seed to 133 using `set.seed(133)`. Then, we create a matrix `x` using the `sample` function to generate a permutation of integers from 1 to 25. The `sample(1:25)` generates a random permutation, and `matrix()` is used to convert the vector into a matrix with 5 columns.
Next, we use the `apply` function to apply the `sum pairs` function to each row of the matrix `x`. The `apply(x, 1, function(z) sum(z[z %% 2 == 0]))` statement calculates the sum of even elements in each row of `x`. The function `sum pairs` is defined inline as an anonymous function within the `apply` call. The `z[z %% 2 == 0]` expression selects only the even elements from the vector `z`, and `sum()` calculates their sum.
Finally, the result is printed, which will be a vector containing the sums of even elements in each row of `x`.
To know more about the set.seed(133):https://brainly.com/question/33467627
#SPJ11
) Let S = X; be the aggregate loss from a driver in a year, where i=1
N is the total number of accidents from a driver in a year;
• X1, X2,..., are i.i.d random variables representing the individual amounts of losses from the incurred accidents. N and X are assumed to be independent.
This is the so called the collective risk model in actuarial literature. Note that S = 0 if N 0. Further assume that N P(2) and X Pareto(3, 100). ~
Using Excel to simulate 10 values for S and display all your work in an Excel Sheet.
To simulate values for S, which represents the aggregate loss from a driver in a year, we need to consider the distribution of N (total number of accidents) and X (individual amounts of losses).
Assuming that N follows a Poisson distribution with parameter λ and X follows a Pareto distribution with parameters α and β, we can use Excel's random number generation functions to simulate the values.
Generate values for N:
In an Excel column, let's say column A, enter the formula "=POISSON.DIST(0, λ, FALSE)" in cell A1 to represent the probability of zero accidents.
In cell A2, enter the formula "=POISSON.DIST(1, λ, FALSE)" to represent the probability of one accident.
Drag the formulas down to generate probabilities for higher values of N.
In a separate cell, let's say B1, use the function "=SUMPRODUCT(A1:A10,ROW(A1:A10)-1)" to generate a random number for N based on the probabilities calculated.
Generate values for X:
In an Excel column, let's say column C, enter the formula "=1-(1-RAND())^(1/β)" in cell C1 to simulate a value for X.
Drag the formula down to generate more values for X.
Calculate the values for S:
In a new column, let's say column D, enter the formula "=B1*C1" in cell D1 to calculate the aggregate loss for the first simulation.
Drag the formula down to calculate the aggregate loss for the remaining simulations.
By repeating the above steps for a total of 10 simulations, you will have a set of simulated values for S based on the given assumptions.
Learn more about distribution from
https://brainly.com/question/23286309
#SPJ11
Y represents the final scores of AREC 339 in 2013 and it was
normally distributed with the mean score of 80 and variance of
16.
a. Find P(Y≤ 70)
b. P(Y≥ 90)
c. P(70≤ Y≤ 90)
The 2013 AREC 339 scores were normally distributed with a mean of 80 and a variance of 16. To find P(Y ≤ 70), standardize the score using the formula Z = (X - µ) / σ. The required probabilities are P(Y ≥ 90) = 0.0062b and P(70 ≤ Y ≤ 90) = 0.9938.
Given thatY represents the final scores of AREC 339 in 2013 and it was normally distributed with the mean score of 80 and variance of 16.a. To find P(Y ≤ 70) we need to standardize the score.
Standardized Score (Z) = (X - µ) / σ
Where,X = 70µ = 80σ = √16 = 4Then,Standardized Score (Z) = (70 - 80) / 4 = -2.5
Therefore, P(Y ≤ 70) = P(Z ≤ -2.5)From Z table, we get the value of P(Z ≤ -2.5) = 0.0062b.
To find P(Y ≥ 90) we need to standardize the score. Standardized Score (Z) = (X - µ) / σWhere,X = 90µ = 80σ = √16 = 4Then,Standardized Score (Z) = (90 - 80) / 4 = 2.5
Therefore, P(Y ≥ 90) = P(Z ≥ 2.5)From Z table, we get the value of P(Z ≥ 2.5) = 0.0062c.
To find P(70 ≤ Y ≤ 90) we need to standardize the score. Standardized Score
(Z) = (X - µ) / σ
Where,X = 70µ = 80σ = √16 = 4
Then, Standardized
Score (Z)
= (70 - 80) / 4
= -2.5
Standardized Score
(Z) = (X - µ) / σ
Where,X = 90µ = 80σ = √16 = 4
Then, Standardized Score (Z) = (90 - 80) / 4 = 2.5Therefore, P(70 ≤ Y ≤ 90) = P(-2.5 ≤ Z ≤ 2.5)From Z table, we get the value of P(-2.5 ≤ Z ≤ 2.5) = 0.9938
Hence, the required probabilities are as follows:a. P(Y ≤ 70) = P(Z ≤ -2.5) = 0.0062b. P(Y ≥ 90) = P(Z ≥ 2.5) = 0.0062c. P(70 ≤ Y ≤ 90) = P(-2.5 ≤ Z ≤ 2.5) = 0.9938.
To know more about probabilities Visit:
https://brainly.com/question/29381779
#SPJ11
The bus fare in a cily is $2.00. People who use the bus have the option of purchasing a monthly coupon bonk for 530.00. With the coupon bock, the fare is fechuced to $1.00 Detaine the number of times in a month the bus nust be used so that the total monthly cost without the coupon book is the same as the total monthy cort with the coupon beok The bus must be used times
To make the total monthly cost without the coupon book equal to the total monthly cost with the coupon book, the bus must be used 30 times in a month. The solution is obtained by solving algebraic equation.
In the scenario without the coupon book, each bus ride costs $2.00. Let's assume the person uses the bus x times in a month. So, the total cost without the coupon book is given by 2x dollars.
With the coupon book, each bus ride costs $1.00. Since the monthly coupon book costs $30.00 (as given in the question), the person has effectively pre-purchased 30 bus rides. Therefore, the total cost with the coupon book is $30.00 (cost of the coupon book) plus $1.00 multiplied by the number of additional bus rides taken.
To find the number of additional bus rides, we need to equate the total costs without and with the coupon book. This gives us the equation: 2x = 30 + 1x. Solving for x, we find x = 30. Hence, the person must use the bus 30 times in a month to make the total monthly cost without the coupon book equal to the total monthly cost with the coupon book.
To know more about algebraic equation refer here:
https://brainly.com/question/11862255
#SPJ1
calculate the rate per cent per annum if $5760 Simple interest is paid when $12800 is invested for 6 years
If $12,800 is invested for 6 years and the simple interest earned is $5,760, the rate per cent per annum is 7.5%. This means that the investment is growing at a rate of 7.5% per year.
To calculate the rate per cent per annum for a simple interest investment, we can use the formula:
Simple Interest = (Principal * Rate * Time) / 100
In this case, we are given that the Principal (P) is $12,800, Simple Interest (SI) is $5,760, and Time (T) is 6 years. We need to calculate the Rate (R). Plugging in these values into the formula, we get:
$5,760 = ($12,800 * R * 6) / 100
Now, let's solve the equation to find the value of R:
$5,760 * 100 = $12,800 * R * 6
576,000 = 76,800R
R = 576,000 / 76,800
R = 7.5
Therefore, the rate per cent per annum is 7.5%.
To understand this calculation, let's break it down step by step:
1. The Simple Interest formula is derived from the concept of interest, where interest is a fee paid for borrowing or investing money. In the case of simple interest, the interest is calculated only on the initial amount (principal) and doesn't take into account any subsequent interest earned.
2. We are given the Principal amount ($12,800), the Simple Interest earned ($5,760), and the Time period (6 years). We need to find the Rate (R) at which the investment is growing.
3. By substituting the given values into the formula, we obtain the equation: $5,760 = ($12,800 * R * 6) / 100.
4. To isolate the variable R, we multiply both sides of the equation by 100, resulting in 576,000 = 76,800R.
5. Finally, by dividing both sides of the equation by 76,800, we find that R = 7.5, indicating a rate of 7.5% per annum.
Learn more about simple interest at: brainly.com/question/30964674
#SPJ11
At west view high school, every freshman (fr) and sophomore (so) has either math (m), science (s), english (e), or history (h) as the first class of the day. The two-way table shows the distribution of students by first class and grade level. Which expression represents the conditional probability that a randomly selected freshman has english as the first class of the day? p( ) what is the probability that a randomly selected freshman has english as the first class of the day?.
The probability that a randomly selected freshman has English as the first class of the day is 1/5 or 20%.
The expression that represents the conditional probability that a randomly selected freshman has English as the first class of the day is: p(E|Fr), where E represents English and Fr represents freshman.
To calculate this probability, we need to use the information from the two-way table. The total number of freshmen is given in the table as 150. The number of freshmen with English as their first class is 30.
So, the probability that a randomly selected freshman has English as the first class of the day can be calculated as:
p(E|Fr) = Number of freshmen with English as first class / Total number of freshmen
p(E|Fr) = 30 / 150
Simplifying the expression:
p(E|Fr) = 1/5
Learn more about probability from the given link:
https://brainly.com/question/31828911
#SPJ11
Multiply.
Answer as a fraction. Do not include spaces in your answer
5 1/6•(-2/5) =???
When multiplied, 5 1/6 and -2/5 equals -31/15.
To multiply 5 1/6 by -2/5, we first need to convert the mixed number to an improper fraction:
5 1/6 = (6 x 5 + 1) / 6 = 31/6
Now we can multiply the fractions:
(31/6) x (-2/5) = -(62/30)
We can simplify this fraction by dividing both the numerator and denominator by their greatest common factor (2):
-(62/30) = -31/15
Therefore, when multiplied, 5 1/6 and -2/5 equals -31/15.
Learn more about number from
https://brainly.com/question/27894163
#SPJ11
An
autonomous first-order differential equation can be solved using
the guide to separable equations.
True or False
False. Autonomous first-order differential equations can be solved using various methods, but the "guide to separable equations" is not specific to autonomous equations.
Separable equations are a specific type of differential equation where the variables can be separated on opposite sides of the equation. Autonomous equations, on the other hand, are differential equations where the independent variable does not explicitly appear. They involve the derivative of the dependent variable with respect to itself. The solution methods for autonomous equations may include separation of variables, integrating factors, or using specific techniques based on the characteristics of the equation.
Learn more about differential equations here :-
https://brainly.com/question/32645495
#SPJ11
Consider the least-squares estimated fitted line: Y
i
=b 0
+b 1
X i
. Prove the following properties: (a) ∑ i=1
n
e i
=0, where e i
are residuals defined as e i
=Y i
− Y
i
. (b) Show that b 0
,b 1
are critical points of the objective function ∑ i=1
n
e i
2
, where b 1
= ∑ j
(X j
− X
ˉ
) 2
∑ i
(X i
− X
ˉ
)(Y i
− Y
ˉ
)
,b 0
= Y
ˉ
−b 1
X
ˉ
. (c) ∑ i=1
n
Y i
=∑ i=1
n
Y
^
i
. (d) ∑ i=1
n
X i
e i
=0. (e) ∑ i=1
n
Y
i
e i
=0. (f) The regression line always passes through ( X
ˉ
, Y
ˉ
).
The least-squares estimated fitted line is a straight line that minimizes the sum of the squared errors (vertical distances between the observed data and the line).
For every x, the value of Y is calculated using the least squares estimated fitted line:Yi^=b0+b1XiHere, we have to prove the following properties:
a) ∑ i=1nei=0,
b) Show that b0,b1 are critical points of the objective function ∑ i=1nei^2, where b1=∑j(Xj−X¯)2∑i(Xi−X¯)(Yi−Y¯),b0=Y¯−b1X¯.c) ∑ i=1nYi=∑ i=1nY^i,d) ∑ i=1nXi ei=0,e) ∑ i=1nYiei=0,f)
The regression line always passes through (X¯,Y¯).
(a) Let's suppose we calculate the residuals ei=Yi−Y^i and add them up. From the equation above, we get∑i=1nei=Yi−∑i=1n(Yi−b0−b1Xi)=Yi−Y¯+Y¯−b0−b1(Xi−X¯).
The first and third terms in the equation cancel out, as a result, ∑i=1nei=0.
(b) Let us consider the objective function ∑i=1nei^2=∑i=1n(Yi−b0−b1Xi)2, which is a quadratic equation in b0 and b1. Critical points of this function, b0 and b1, can be obtained by setting the partial derivatives to 0.
Differentiating this equation with respect to b0 and b1 and equating them to zero, we obtainb1=∑j(Xj−X¯)2∑i(Xi−X¯)(Yi−Y¯),b0=Y¯−b1X¯.∑i=1nYi=∑i=1nY^i, because the slope and intercept of the least-squares fitted line are calculated in such a way that the vertical distances between the observed data and the line are minimized.
(d) We can write Yi−b0−b1Xi as ei.
If we multiply both sides of the equation by Xi, we obtainXi ei=Xi(Yi−Y^i)=XiYi−(b0Xi+b1Xi^2). Since Y^i=b0+b1Xi, this becomes Xi ei=XiYi−b0Xi−b1Xi^2.
We can rewrite this equation as ∑i=1nXi ei=XiYi−b0∑i=1nXi−b1∑i=1nXi^2. But b0=Y¯−b1X¯, and therefore, we can simplify the equation as ∑i=1nXi ei=0.
(e) Similarly, if we multiply both sides of the equation ei=Yi−Y^i by Yi, we get Yi ei=Yi(Yi−Y^i)=Yi^2−Yi(b0+b1Xi).
Since Y^i=b0+b1Xi, this becomes Yi ei=Yi^2−Yi(b0+b1Xi).
We can rewrite this equation as ∑i=1nYi ei=Yi^2−b0∑i=1nYi−b1∑i=1nXiYi.
But b0=Y¯−b1X¯ and ∑i=1n(Yi−Y¯)Xi=0, which we obtained in (d), so we can simplify the equation as ∑i=1nYi ei=0.(f) The equation for the least squares estimated fitted line is Yi^=b0+b1Xi, where b0=Y¯−b1X¯.
Therefore, this line passes through (X¯,Y¯).
We have shown that the properties given above hold for the least squares estimated fitted line.
To know more about regression line :
brainly.com/question/29753986
#SPJ11
The package of CFL 65-watt light bulbs claims the bulbs average life is 8000 hours with a standard deviation of 400 hours. The lifespan of all CFL 65-watt light bulbs has a normal distribution. Let
x
ˉ
be the average life of 25 light bulbs selected randomly. Find the probability that the mean life is less than 7890 hours. Submit final answer only & answer must be 4 decimal places.
The average life of 25 randomly selected CFL 65-watt light bulbs is 8000 hours with a standard deviation of 400 hours. To find the probability that the mean life is less than 7890 hours, use the normal distribution with parameters μx ˉ = 8000σx ˉ = 80. The required probability is P(X ˉ < 7890) = P(z < -1.375). The answer is 0.0849.
Given that the average life of CFL 65-watt light bulbs is 8000 hours with a standard deviation of 400 hours. Let x ˉ be the average life of 25 light bulbs selected randomly. We are supposed to find the probability that the mean life is less than 7890 hours.
Let X be the random variable such that X ~ N(μ, σ2), where μ = 8000 and σ = 400. Then, the sample mean of the 25 selected light bulbs is given by the normal distribution with the following parameters:
μx ˉ = μ
= 8000σx ˉ
= σ/√n
= 400/√25
= 80
Hence X ˉ ~ N(μx ˉ, σx ˉ2) = N(8000, 80²)Using the z-score formula,z = (X ˉ - μx ˉ)/σx ˉ = (7890 - 8000)/80 = -1.375The required probability that the mean life is less than 7890 hours is given by:
P(X ˉ < 7890) = P(z < -1.375)
Using the standard normal distribution table, we can find that:P(z < -1.375) = 0.0848 (approx)Therefore, the probability that the mean life is less than 7890 hours is 0.0848 or 0.0849 (rounded off to four decimal places). Hence the answer is 0.0849.
To know more about probability Visit:
https://brainly.com/question/30034780
#SPJ11
In physics class, Taras discovers that the behavior of electrical power, x, in a particular circuit can be represented by the function f(x) x 2 2x 7. If f(x) 0, solve the equation and express your answer in simplest a bi form.1) -1 ± i√62) -1 ± 2i3) 1 ± i√64) -1 ± i
Taras discovers that the behavior of electrical power, x, in a particular circuit can be represented by expression is option (2) [tex]x = -1 \pm 2i\sqrt{6}[/tex].
To solve the equation f(x) = 0, which represents the behavior of electrical power in a circuit, we can use the quadratic formula.
The quadratic formula states that for an equation of the form [tex]ax^2 + bx + c = 0[/tex] the solutions for x can be found using the formula:
[tex]x = \frac{-b \pm \sqrt{b^2 - 4ac}}{2a}[/tex]
In this case, our equation is [tex]x^2 + 2x + 7 = 0[/tex].
Comparing this to the general quadratic form,
we have a = 1, b = 2, and c = 7.
Substituting these values into the quadratic formula, we get:
[tex]x = \frac{-2 \pm \sqrt{2^2 - 4 \times 1 \times 7}}{2 \times 1}[/tex]
[tex]x = \frac{-2 \pm \sqrt{4 - 28}}{2}[/tex]
[tex]x = \frac{-2 \pm \sqrt{-24}}{2}[/tex]
Since the value inside the square root is negative, we have imaginary solutions. Simplifying further, we have:
[tex]x = \frac{-2 \pm 2\sqrt{6}i}{2}[/tex]
[tex]x = -1 \pm 2i\sqrt{6}[/tex]
Thus option (2) [tex]-1 \pm 2i\sqrt{6}[/tex] is correct.
Learn more about expression from the given link:
https://brainly.com/question/30091641
#SPJ11
Katie memorized 40 multiplication facts last week. This week she memorized 56 multiplication facts. What is her percent of increase for mamorizing multiplication facts this week?mcq choices: 140%, 71.4%, 40% ,22.4%
Katie's percent of increase for memorizing multiplication facts this week is 40%.Thus, the correct option is (C) 40%.
To calculate the percent increase in the number of multiplication facts memorized by Katie, we need to find the difference between the number of facts memorized this week and the number memorized last week, and then express that difference as a percentage of the number of facts memorized last week.
Last week: 40 multiplication facts
This week: 56 multiplication facts
Difference = 56 - 40 = 16
Percent Increase = (Difference / Last week) * 100
Percent Increase = (16 / 40) * 100
Percent Increase = 0.4 * 100
Percent Increase = 40%
Therefore, Katie's percent increase in memorizing multiplication facts this week is 40%.
Among the given choices:
- 140% is not the correct answer.
- 71.4% is not the correct answer.
- 40% is the correct answer.
- 22.4% is not the correct answer.
So, the correct answer is 40%.
Therefore, Katie's percent of increase for memorizing multiplication facts this week is 40%.Thus, the correct option is (C) 40%.
Learn more about Percentange:https://brainly.com/question/24877689
#SPJ11
Determine the following probabilities: a) The order includes sleeping mats. b) The order includes a tent given it includes sleeping mats
To determine the probabilities, we need additional information such as the total number of items in the order and the probability of each item being included. Since it is not provided, let us take an example.
A camping supply store offers three types of items: tents, sleeping bags, and sleeping mats. On average, 60% of the orders include sleeping bags, 40% include tents, and 30% include sleeping mats.
To solve these probabilities, we can use conditional probability. Let's calculate:
a) Probability of an order including sleeping mats:
The probability of an order including sleeping mats is given as 30% or 0.30.
b) Probability of an order including a tent given it includes sleeping mats:
To calculate this, we need the joint probability of an order including both a tent and sleeping mats, as well as the probability of an order including sleeping mats (which we calculated in part a).
Let's assume that 20% of the orders include both tents and sleeping mats (0.20).
Now, we can calculate the conditional probability:
We know the formula,
P(A | B) = P(A and B) / P(B). ..(i)
where,
and= and operation,
Therefore,
P(Tent | Sleeping Mats) = P(Tent and Sleeping Mats) / P(Sleeping Mats)
P(Tent | Sleeping Mats) = 0.20 / 0.30
P(Tent | Sleeping Mats) ≈ 0.67 or 67%
Therefore, the probability that an order includes a tent, given that it includes sleeping mats, is approximately 67%.
To learn more about conditional probability,
https://brainly.com/question/30993688
Drill Problem 10-13 (Algo) [LU 10-3 (1)] Given Principal $12,50ae . Interest. Aate 5%, Tine 74 abys fuse erdinary interesti Partlat payments: On 100th day, $5, eed On 18at ta day, 33,006 a. Use the US. Rule to solve for total interest cost. Note: Use 360 dayt a year. Do not round intermediate calculations. Round your answer to the nearest cent. b. Uye the U.S. Rule to solve for balances, Note: Use 360 days a year. Do not round intermediate calculationt. Round your answers to 1 he nearest cent. c. Use the US. Rule to solve for fnal payment. Notet Use 360 days a yeac. Do not round intermediate calculations. Round your answer to the nearest cent.
a. Total interest cost is $151.84.
b. Balances on the 100th and 118th days are $12,669.61 and $9,695.28, respectively.
c. The final payment is $9,771.03.
Given principal $12,500, interest rate 5%, time 74 days, and partial payments on the 100th day ($5) and 18th day ($3,006). We will use the US Rule to calculate the total interest cost, balances, and final payment.
a. Using the US Rule to solve for the total interest cost:
Calculate the interest on $12,500 for 74 days using the formula:
Interest = (Principal × rate × time) / 360 days
Interest = ($12,500 × 0.05 × 74) / 360 = $128.47
The interest on $5 for 24 days is calculated using the same formula:
Interest = ($5 × 0.05 × 24) / 360 = $0.02
Similarly, the interest on $3,006 for 56 days is calculated as follows:
Interest = ($3,006 × 0.05 × 56) / 360 = $23.35
Total interest cost = $128.47 + $0.02 + $23.35 = $151.84
b. Using the US Rule to solve for balances:
Since partial payments are made on the 100th and 118th days, balances are calculated for each of these days.
The interest accrued on the $12,500 principal for 100 days is calculated as follows:
Interest = ($12,500 × 0.05 × 100) / 360 = $173.61
Balance = $12,500 + $173.61 - $5 = $12,669.61
The interest accrued on the balance of $12,669.61 for the next 18 days is calculated as follows:
Interest = ($12,669.61 × 0.05 × 18) / 360 = $31.67
Balance = $12,669.61 + $31.67 - $3,006 = $9,695.28
c. Using the US Rule to solve for the final payment:
Since partial payments are made, the final payment is equal to the balance on the due date.
Balance = $9,695.28
Interest on the balance for the last 56 days is calculated as follows:
Interest = ($9,695.28 × 0.05 × 56) / 360 = $75.75
Final payment = $9,695.28 + $75.75 = $9,771.03 (rounded to the nearest cent).
Learn more about interest rate :
https://brainly.com/question/28236069
#SPJ11
Determine a unit vector in the direction of the following vectors: a)(7,-2) b) ||A|| 125 0144° c) (-1,5, 4)
(a) Unit vector in the direction of (7, -2): (7/√53, -2/√53) (b) Unit vector with magnitude 125 and angle 144°: (125cos(8π/5), 125sin(8π/5)) (c) Unit vector in the direction of (-1, 5, 4): (-1/√42, 5/√42, 4/√42)
(a) To determine a unit vector in the direction of vector (7, -2), divide the vector by its magnitude.
(b) To find a unit vector in the direction of a vector A with magnitude 125 and angle 144°, convert the angle to radians and use cosine and sine functions to calculate the components.
(c) For the vector (-1, 5, 4), divide each component by the magnitude of the vector to obtain a unit vector.
(a) The magnitude of vector (7, -2) is √(7^2 + (-2)^2) = √(49 + 4) = √53. Dividing the vector by its magnitude gives a unit vector (7/√53, -2/√53).
(b) To find the components of a vector with magnitude 125 and angle 144°, we use the formula: A = (Acosθ, Asinθ), where A is the magnitude and θ is the angle in radians. Converting 144° to radians, we have θ = (144° * π/180) = (8π/5). Calculating the components, we get (125cos(8π/5), 125sin(8π/5)).
(c) The magnitude of vector (-1, 5, 4) is √((-1)^2 + 5^2 + 4^2) = √(1 + 25 + 16) = √42. Dividing each component by the magnitude, we obtain the unit vector (-1/√42, 5/√42, 4/√42).
These unit vectors have a magnitude of 1 and represent the direction of the given vectors.
To learn more about functions click here
brainly.com/question/30721594
#SPJ11
Problems 27 through 31, a function y = g(x) is describe by some geometric property of its graph. Write a differential equation of the form dy/dx = f(x, y) having the function g as its solution (or as one of its solutions).
The slope of the graph of g at the point (x, y) is the sum of x and y.
Differential equation: dy/dx = x + y
The given information states that the slope of the graph of function g at any point (x, y) is equal to the sum of x and y. In other words, it means that the rate of change of y with respect to x is given by the expression x + y.
To write a differential equation based on this geometric property, we can set the derivative of y with respect to x equal to the sum of x and y, resulting in the equation dy/dx = x + y.
This differential equation represents the relationship between the variables x and y, where the slope of the graph of g is determined by the values of x and y at any given point. By solving this differential equation, we can find the function g(x) that satisfies the given geometric property.
It's important to note that the differential equation dy/dx = x + y may have multiple solutions. Additional initial conditions or constraints would be necessary to determine a unique solution.
Learn more about Differential equation click here: brainly.com/question/33433874
#SPJ11
Suppose that buses arriving at a certain stop can be modeled as a Poisson process with a rate parameter of 4 per hour. (Give answers with 3 digits after decimal)
a) [1pt] What is the probability that 2 buses arrive during an hour?
b) [2pts] What is the probability that no bus arrives during 20 mins?
c) [2pts] Suppose you just arrive at this stop, what is the probability that you need to wait at least 20 minutes for the bus?
d) [2pts] What is the 30 th percentile of your waiting time (in hours)?
e) [1pt] What is your expected waiting time (in hours)?
A. The probability that 2 buses arrive during an hour is 0.146.
B. The probability that no bus arrives during 20 minutes is approximately 0.263.
C. The probability that you need to wait at least 20 minutes for the bus is approximately 0.737.
D. The 30th percentile of the waiting time is approximately 0.178 hours.
E. the expected waiting time is 0.25 hours.
a) The probability that 2 buses arrive during an hour can be calculated using the Poisson distribution formula:
P(X = k) = (e^(-λ) * λ^k) / k!
Where X is the random variable representing the number of buses arriving, λ is the rate parameter (4 per hour), and k is the number of buses (2 in this case).
P(X = 2) = (e^(-4) * 4^2) / 2!
P(X = 2) = (e^(-4) * 16) / 2
P(X = 2) = (0.0183 * 16) / 2
P(X = 2) = 0.146
Therefore, the probability that 2 buses arrive during an hour is 0.146.
b) The probability that no bus arrives during 20 minutes can be calculated by converting the rate parameter to the appropriate time unit (minutes) and using the Poisson distribution formula:
Rate parameter for 20 minutes = (4 buses per hour) * (20 minutes / 60 minutes) = 4/3 buses
P(X = 0) = (e^(-4/3) * (4/3)^0) / 0!
P(X = 0) = e^(-4/3)
P(X = 0) ≈ 0.263
Therefore, the probability that no bus arrives during 20 minutes is approximately 0.263.
c) The probability of waiting at least 20 minutes for the bus is equal to the complement of the probability of no bus arriving during 20 minutes:
P(Waiting at least 20 mins) = 1 - P(No bus arrives during 20 mins)
P(Waiting at least 20 mins) = 1 - 0.263
P(Waiting at least 20 mins) ≈ 0.737
Therefore, the probability that you need to wait at least 20 minutes for the bus is approximately 0.737.
d) The waiting time follows an exponential distribution with the rate parameter λ = 4 buses per hour. The 30th percentile of the exponential distribution can be calculated using the inverse of the cumulative distribution function (CDF):
30th percentile = -ln(1 - p) / λ
Where p is the probability associated with the desired percentile (0.30 in this case).
30th percentile = -ln(1 - 0.30) / 4
30th percentile ≈ 0.178
Therefore, the 30th percentile of the waiting time is approximately 0.178 hours.
e) The expected waiting time (mean) for an exponential distribution is given by the reciprocal of the rate parameter λ:
Expected waiting time = 1 / λ
Expected waiting time = 1 / 4
Expected waiting time = 0.25 hours
Therefore, the expected waiting time is 0.25 hours.
Learn more about probability from
https://brainly.com/question/30390037
#SPJ11
Solve the following system of equations by using the matrix inverse method: x1+2x2−x3=2 ,x1+x2+2x3=0 ,x1−x2−x3=1
The required answer is \boxed{x_1=-\frac{3}{4}, x_2=\frac{5}{4}, x_3=\frac{1}{4}} using the matrix inverse method.
To solve the following system of equations by using the matrix inverse method:
x1+2x2−x3=2, x1+x2+2x3=0, x1−x2−x3=1.
We can solve the given system of equations by using the matrix inverse method.
Here's how:
Create a matrix for the coefficients of x1, x2, and x3.
We will call this matrix A.
A = \begin{bmatrix} 1 & 2 & -1 \\ 1 & 1 & 2 \\ 1 & -1 & -1 \end{bmatrix}
Create a matrix for the variables x1, x2, and x3. We will call this matrix X.
X = \begin{bmatrix} x_1 \\ x_2 \\ x_3 \end{bmatrix}
Create a matrix for the constants on the right-hand side of the equations. We will call this matrix B.
B = \begin{bmatrix} 2 \\ 0 \\ 1 \end{bmatrix}
Find the inverse of matrix A.
A^{-1} = \frac{1}{\det(A)}\begin{bmatrix} A_{11} & A_{21} & A_{31} \\ A_{12} & A_{22} & A_{32} \\ A_{13} & A_{23} & A_{33} \end{bmatrix}^T
where \det(A) is the determinant of matrix A, and A_{ij} is the cofactor of the element in the ith row and jth column of matrix A.
We can find the inverse of A by using this formula.
A^{-1} = \frac{1}{-4}\begin{bmatrix} 3 & -5 & -1 \\ -3 & 1 & 3 \\ 2 & 2 & -2 \end{bmatrix}^T
Simplifying this gives:
A^{-1} = \begin{bmatrix} -\frac{3}{4} & \frac{3}{4} & -\frac{1}{2} \\ \frac{5}{4} & -\frac{1}{4} & -\frac{1}{2} \\ \frac{1}{4} & \frac{3}{4} & \frac{1}{2} \end{bmatrix}
Use the matrix equation X = A^{-1}B to solve for X. We have:
X = A^{-1}B$$$$\begin{bmatrix} x_1 \\ x_2 \\ x_3 \end{bmatrix} = \begin{bmatrix} -\frac{3}{4} & \frac{3}{4} & -\frac{1}{2} \\ \frac{5}{4} & -\frac{1}{4} & -\frac{1}{2} \\ \frac{1}{4} & \frac{3}{4} & \frac{1}{2} \end{bmatrix} \begin{bmatrix} 2 \\ 0 \\ 1 \end{bmatrix}
\begin{bmatrix} x_1 \\ x_2 \\ x_3 \end{bmatrix} = \begin{bmatrix} -\frac{3}{4} \\ \frac{5}{4} \\ \frac{1}{4} \end{bmatrix}
Therefore, the solution of the given system of equations is
x_1=-\frac{3}{4}, x_2=\frac{5}{4}, x_3=\frac{1}{4}.
Hence, the required answer is \boxed{x_1=-\frac{3}{4}, x_2=\frac{5}{4}, x_3=\frac{1}{4}}.
Let us know more about matrix inverse method : https://brainly.com/question/26128940.
#SPJ11
You should show that the answer is Cn, the n-th Catalan number.
You can show this by showing that the initial values are the same
and that the sequence satisfies the Catalan recursion, or by
providing
x_{0} \cdot x_{1} \cdot x_{2} \cdots, x_{n} to specify the order of multiplication is C_{n} . For example, C_{3}=5 because there are five ways to parenthesize x_{0} \cdot x_{1} \cd
The sequence Cn, known as the n-th Catalan number, can be shown to represent the order of multiplication x₀ ⋅ x₁ ⋅ x₂ ⋯ xₙ. The Catalan numbers have a recursive formula and satisfy certain initial conditions.
To demonstrate this, let's consider the properties of the Catalan numbers:
Initial values: The first few Catalan numbers are C₀ = 1, C₁ = 1, C₂ = 2. These values represent the number of ways to parenthesize the multiplication of x₀, x₁, and x₂.
Recursive formula: The Catalan numbers can be defined using the following recursive formula:
Cₙ = C₀Cₙ₋₁ + C₁Cₙ₋₂ + C₂Cₙ₋₃ + ⋯ + Cₙ₋₂C₁ + Cₙ₋₁C₀
This formula shows that the n-th Catalan number is the sum of products of two smaller Catalan numbers.
By observing the initial values and the recursive formula, it becomes apparent that the sequence Cn represents the order of multiplication x₀ ⋅ x₁ ⋅ x₂ ⋯ xₙ. Each Catalan number represents the number of ways to parenthesize the multiplication expression, capturing all possible orderings.
For example, C₃ = 5 because there are five ways to parenthesize the multiplication x₀ ⋅ x₁ ⋅ x₂:
(x₀ ⋅ (x₁ ⋅ (x₂)))
((x₀ ⋅ x₁) ⋅ (x₂))
((x₀ ⋅ (x₁ ⋅ x₂)))
(((x₀ ⋅ x₁) ⋅ x₂))
(((x₀ ⋅ x₁) ⋅ x₂))
Thus, the sequence Cn represents the order of multiplication x₀ ⋅ x₁ ⋅ x₂ ⋯ xₙ and follows the Catalan recursion.
Know more about Catalan here:
https://brainly.com/question/32318950
#SPJ11
Suppose that f(5)=1,f ′(5)=8,g(5)=−5, and g′ (5)=9. Find the following values. (a) (fg) ′(5) (b) ( f/g)′(5) (c) (g/f) ′(5)
(a) The value of (fg)'(5) is -31. (b) The value of (f/g)'(5) is -49/25. (c) The value of (g/f)'(5) is 49.
To find the values, we can use the product rule and quotient rule of differentiation.
(a) Using the product rule, the derivative of (fg) is given by:
(fg)' = f'g + fg'
At x = 5, we have f(5) = 1, f'(5) = 8, g(5) = -5, and g'(5) = 9. Plugging these values into the derivative formula:
(fg)'(5) = f'(5)g(5) + f(5)g'(5)
= 8*(-5) + 1*9
= -40 + 9
= -31
Therefore, (fg)'(5) = -31.
(b) Using the quotient rule, the derivative of (f/g) is given by:
[tex](f/g)' = (f'g - fg') / g^2[/tex]
At x = 5, we have f(5) = 1, f'(5) = 8, g(5) = -5, and g'(5) = 9. Plugging these values into the derivative formula:
[tex](f/g)'(5) = (f'(5)g(5) - f(5)g'(5)) / g(5)^2\\= (8*(-5) - 1*9) / (-5)^2[/tex]
= (-40 - 9) / 25
= -49 / 25
Therefore, (f/g)'(5) = -49/25.
(c) Using the quotient rule again, but with the roles of f and g reversed, the derivative of (g/f) is given by:
[tex](g/f)' = (g'f - gf') / f^2[/tex]
At x = 5, we have f(5) = 1, f'(5) = 8, g(5) = -5, and g'(5) = 9. Plugging these values into the derivative formula:
[tex](g/f)'(5) = (g'(5)f(5) - g(5)f'(5)) / f(5)^2\\= (9*1 - (-5)*8) / 1^2[/tex]
= (9 + 40) / 1
= 49
Therefore, (g/f)'(5) = 49.
To know more about value,
https://brainly.com/question/32713565
#SPJ11
A parachutist's elevation changes by -143ft in 13 seconds. What is the change in the parachutist's elevation each second? Her elevation changes feet each second.
If the parachutist's elevation changes by -143ft in 13 seconds, then the change in the parachutist's elevation each second is -11 ft/s.
To find the change in the parachutist's elevation each second, follow these steps:
The formula to calculate elevation change is as follows: change in elevation/time taken. The change in elevation is -143 ft and the time taken is 13 seconds.Substitute the values in the formula to calculate the change in the parachutist's elevation each second, we get Change in elevation/time taken= (-143) / 13= -11 feet/s.Therefore, the change in the parachutist's elevation each second is -11 feet/s.
Learn more about elevation:
brainly.com/question/88158
#SPJ11
Please help quickly! I need this for an exam!
An image of a rhombus is shown.
What is the area of the rhombus?
Answer:
18*15=270cm²
Step-by-step explanation:
y=0.5+ce −40t
is a one-parameter family of solutions of the 1st-order ordinary differential equation y ′
+40y=20. Find a solution of the 1st-order Initial-Value Problem (IVP) consisting of this ordinary differential equation and the following initial condition: y(0)=0
The solution to the initial-value problem (IVP) y' + 40y = 20 with the initial condition y(0) = 0 is y = 0.5 - 0.5e^(-40t).
To find a solution to the initial-value problem (IVP) given the differential equation y' + 40y = 20 and the initial condition y(0) = 0, we will substitute the initial condition into the one-parameter family of solutions y = 0.5 + ce^(-40t).
Given y(0) = 0, we can substitute t = 0 and y = 0 into the equation:
0 = 0.5 + ce^(-40 * 0)
Simplifying further:
0 = 0.5 + c
Solving for c:
c = -0.5
Now, we have the specific value of the parameter c. Substituting it back into the one-parameter family of solutions, we get:
y = 0.5 - 0.5e^(-40t)
Therefore, the solution to the initial-value problem (IVP) y' + 40y = 20 with the initial condition y(0) = 0 is y = 0.5 - 0.5e^(-40t).
Know more about Initial-Value Problem here:
https://brainly.com/question/30503609
#SPJ11
Find the unique solution of the second-order initial value problem. y' + 7y' + 10y= 0, y(0)=-9, y'(0) = 33
The unique solution to the second-order initial value problem y' + 7y' + 10y = 0, y(0) = -9, y'(0) = 33 is y(x) = -3e^(-2x) - 6e^(5x).
To find the solution to the second-order initial value problem, we first write the characteristic equation by replacing the derivatives with the corresponding variables:
r^2 + 7r + 10 = 0
Solving the quadratic equation, we find two distinct roots: r = -2 and r = -5.
The general solution to the homogeneous equation y'' + 7y' + 10y = 0 is given by y(x) = c1e^(-2x) + c2e^(-5x), where c1 and c2 are constants.
Next, we apply the initial conditions y(0) = -9 and y'(0) = 33 to determine the specific values of c1 and c2.
Plugging in x = 0, we get -9 = c1 + c2.
Differentiating y(x), we have y'(x) = -2c1e^(-2x) - 5c2e^(-5x). Plugging in x = 0, we get 33 = -2c1 - 5c2.
Solving the system of equations -9 = c1 + c2 and 33 = -2c1 - 5c2, we find c1 = -3 and c2 = -6.
Therefore, the unique solution to the initial value problem is y(x) = -3e^(-2x) - 6e^(5x).
To learn more about derivatives click here
brainly.com/question/29020856
#SPJ11
Find the area of the parallelogram whose vertices are given below. A(0,0,0)B(4,3,6)C(8,1,6)D(4,−2,0) The area of parallelogram ABCD is (Type an exact answer, using radicals as needed.)
To find the area of the parallelogram ABCD, we can use the cross product of two vectors formed by the sides of the parallelogram. Let's consider vectors AB and AD.
Vector AB = B - A = (4, 3, 6) - (0, 0, 0) = (4, 3, 6)
Vector AD = D - A = (4, -2, 0) - (0, 0, 0) = (4, -2, 0)
Now, we can calculate the cross product of AB and AD to find the area vector of the parallelogram:
Area Vector = AB x AD = (4, 3, 6) x (4, -2, 0)
To calculate the cross product, we can use the determinant of a 3x3 matrix:
Area Vector = [(3 * 0) - (6 * -2), (6 * 4) - (4 * 0), (4 * -2) - (3 * 4)]
= [12, 24, -20]
The magnitude of the area vector gives us the area of the parallelogram:
Area = |Area Vector| = sqrt(12^2 + 24^2 + (-20)^2) = sqrt(144 + 576 + 400) = sqrt(1120) = 4√70
Therefore, the area of the parallelogram ABCD is 4√70.
To know more about parallelogram, visit;
https://brainly.com/question/970600
#SPJ11
We are given a dataset S.csv, whose elements are drawn i.i.d. from a Bernoulli with mean μ. Let us denote this dataset by a sequence S = (Xt)1≤t≤n of length n (i.e., n is the number of elements in the dataset).
Compute 0.97-CI (two-sided) for μ using Hoeffding’s inequality. Report the numerical values of the computed intervals, and provide a brief explanation of your calculations (including any formula/procedure used).
We are given a dataset S.csv, whose elements are drawn i.i.d. from a Bernoulli with mean μ. Let us denote this dataset by a sequence S = (Xt)1≤t≤n of length n (i.e., n is the number of elements in the dataset).
Compute 0.97-CI (two-sided) for μ using Hoeffding’s inequality.
Report the numerical values of the computed intervals, and provide a brief explanation of your calculations (including any formula/procedure used).
Hoeffding’s Inequality provides a general bound on the probability that a sum of i.i.d. random variables deviates from its expected value by more than a certain amount.
Hoeffding’s Inequality states that the probability that the sum of i.i.d. random variables deviates from its expected value by more than ε is bounded by 2e−2ε2/σ2.
To calculate ε, we use the Hoeffding’s Inequality with δ = 1 - 0.97 = 0.03.ε = sqrt(log(2/δ) / (2n))ε = sqrt(log(2/0.03) / (2n))ε = sqrt(log(66.67) / (2n))
The confidence interval for μ is [μ - ε, μ + ε].
We substitute the value of ε in the formula to get the numerical values of the confidence interval.
μ - ε = μ - sqrt(log(66.67) / (2n))μ + ε = μ + sqrt(log(66.67) / (2n))
Therefore, the 0.97-CI (two-sided) for μ using Hoeffding’s inequality is
[μ - sqrt(log(66.67) / (2n)), μ + sqrt(log(66.67) / (2n))].
To know more about Bernoulli visit:
https://brainly.com/question/33293474
#SPJ11
. Importance of hydrologic cycle The role of water is central to most natural processes - Transport - Weathering, contaminant transport - Energy balance - transport of heat, high heat capacity - Greenhouse gas - 80% of the atmospheric greenhouse effect is caused by water vapor - Life - for most terrestrial life forms, water determines where they may live; man is exception
The hydrologic cycle, also known as the water cycle, plays a crucial role in the Earth's natural processes. It involves the continuous movement of water between the Earth's surface, atmosphere, and underground reservoirs.
The importance of the hydrologic cycle can be understood by considering its various functions:
Transport: The hydrologic cycle facilitates the transport of water across the Earth's surface, including rivers, lakes, and oceans. This movement of water is vital for the distribution of nutrients, sediments, and organic matter, which are essential for the functioning of ecosystems.
Weathering and Contaminant Transport: Water plays a significant role in weathering processes, such as erosion and dissolution of rocks and minerals. It also acts as a carrier for contaminants, pollutants, and nutrients, influencing their transport through the environment.
Energy Balance: Water has a high heat capacity, which means it can absorb and store large amounts of heat energy. This property helps regulate the Earth's temperature and climate by transporting heat through evaporation, condensation, and precipitation.
Greenhouse Gas: Water vapor is a major greenhouse gas that contributes to the Earth's natural greenhouse effect. It absorbs and re-emits thermal radiation, trapping heat in the atmosphere. Approximately 80% of the atmospheric greenhouse effect is attributed to water vapor.
Life: Water is vital for supporting life on Earth. It provides a habitat for numerous organisms and serves as a medium for various biological processes. Terrestrial life forms, including plants, animals, and humans, rely on water availability for their survival, growth, and reproduction.
It is important to note that while water is critical for most terrestrial life forms, human beings have developed technologies and systems that allow them to inhabit regions with limited water availability. However, water still remains a fundamental resource for human societies, and the hydrologic cycle plays a crucial role in ensuring its availability and sustainability.
To know more about hydrologic cycle click here:
https://brainly.com/question/13729546
#SPJ4
Suppose (an) is a sequence in R, and let b_n = ((a_n)+(a_n)+1)/2for each n.
Use the definition of convergence to prove that if lim n→[infinity] (a_n) = (a_n) in R, then lim n→[infinity] b_n.
Also show by example that (b_n) may converge without (a_n) converging.
(b_n) converges to 0, but (a_n) does not converge.
To prove that if lim n→[infinity] (a_n) = (a_n) in R, then lim n→[infinity] b_n, we need to show that for any given ε > 0, there exists an N such that for all n ≥ N, |b_n - L| < ε, where L is the limit of (a_n).
By the definition of convergence of (a_n), for ε/2 > 0, there exists an N such that for all n ≥ N, |a_n - L| < ε/2.
Now consider b_n = (a_n + a_n+1)/2. We can rewrite it as b_n - L = (a_n - L)/2 + (a_n+1 - L)/2.
Using the triangle inequality, we have |b_n - L| ≤ |(a_n - L)/2| + |(a_n+1 - L)/2|.
Since |a_n - L| < ε/2 and |a_n+1 - L| < ε/2 for all n ≥ N, we can say |b_n - L| < ε/2 + ε/2 = ε.
Thus, we have shown that if lim n→[infinity] (a_n) = (a_n) in R, then lim n→[infinity] b_n.
To show an example where (b_n) may converge without (a_n) converging, consider the sequence a_n = (-1)^n. It oscillates between -1 and 1, and does not converge.
However, if we take b_n = (a_n + a_n+1)/2, we get b_n = ( (-1)^n + (-1)^(n+1) ) / 2 = 0 for all n.
Learn more about converges here :-
https://brainly.com/question/29258536
#SPJ11
Let f(x) = 1/4x, g(x) = 5x³, and h(x) = 6x² + 4. Then f o g o h(2) =
f o g o h(2) = 54880 is the required solution.
Given f(x) = (1/4)x, g(x) = 5x³, and h(x) = 6x² + 4.
Find the value of f o g o h(2).
Solution:
The composition of functions f o g o h(2) can be found by substituting h(2) = 6(2)² + 4 = 28 into g(x) to get
g(h(2)) = g(28) = 5(28)³ = 219520.
Now we need to substitute this value in f(x) to get the final answer;
hence
f o g o h(2) = f(g(h(2)))
= f(g(2))
= f(219520)
= (1/4)219520
= 54880.
Therefore, f o g o h(2) = 54880 is the required solution.
To know more about solution visit:
https://brainly.com/question/1616939
#SPJ11
