Airbags are activated when a severe impact causes a steel ball to compress a spring and electrically ignite a detonator cap. This causes sodium azide (NaN3) to decompose explosively according to the following reaction.2NaN3(s)→2Na(s)+3N2(g)What mass of NaN3(s) must be reacted in order to inflate an airbag to 73.1 L at s.t.p?

Only reversible reactions may reach dynamic equilibrium, which happens when the rates of the forward and reverse processes are identical.

When a system is in a state of dynamic equilibrium, the reversible reaction that is occurring in it no longer changes the ratio of reactants to products, but there is still movement of substances between the reactants and products. Because reactants and products continue to alter even after equilibrium has been reached, chemical equilibrium is dynamic in nature. Dynamic equilibrium is a condition in which bodies are moving at a constant speed as opposed to static equilibrium, which is a state in which bodies are at rest (rectilinear motion). The total amount of pressures exerted on them in both situations is zero.

learn more about dynamic equilibrium here:

https://brainly.com/question/19386257

#SPJ4

Only reversible reactions may reach dynamic equilibrium, which happens when the rates of the forward and reverse processes are identical.

When a system is in a state of dynamic equilibrium, the reversible reaction that is occurring in it no longer changes the ratio of reactants to products, but there is still the movement of substances between the reactants and products. Because reactants and products continue to alter even after equilibrium has been reached, chemical equilibrium is dynamic in nature. Dynamic equilibrium is a condition in which bodies are moving at a constant speed as opposed to static equilibrium, which is a state in which bodies are at rest (rectilinear motion). The total amount of pressure exerted on them in both situations is zero.

learn more about dynamic equilibrium here:

brainly.com/question/19386257

#SPJ4

The k sp expressions for the reactions is Ks is [Ca2+]3 and [PO4 3+]2.Ks (solubility product) is the result of multiplying the calcium ion concentration by the phosphate ion concentration.

Ks (solubility product) is the result of multiplying the calcium ion concentration by the phosphate ion concentration. When salt is introduced to water, it dissolves and the molecules split apart into ions. The following equation can be used to express it:

Ca3(PO4)2(s) <—> 2PO4 3+ with 3Ca2+ (aq)

The molecule's state is indicated by the letters s and aq. S stands for solid, and AQ for aqueous.

K = [D]d. [C]c/ [A]a. [B]b is the formula used to represent this constant in chemical equilibrium.

One further thing to keep in mind is that the constant only accounts for gases and aqueous molecules; solids and liquids have no bearing on it. In the equation, values are replaced by 1, and the constant is not affected by solids or liquids.

Since Ca3(PO4)2 is now solid, it has no effect on Ks; in this situation, the only relevant concentrations are those of Ca and PO4. This ions' expression of Ks is because they are products.

Ks=[Ca2+]3 and [PO4 3+]2.

To learn more about  k sp expressions refer to:

https://brainly.com/question/28790035

#SPJ4

An expressions can be used to calculate the value of K3 for reaction 3 at the same temperature is

K3 ⇒ ( - Kı) + (- K2)

To determine the value of K3 for reaction 3 at the same temperature, use the expression as

"K3 ⇒ (- K) + (- K2)".

This is thus because the concentrations of the reactants and products in a reaction affect the equilibrium constant for that reaction. Since reaction 3 is the result of the combination of reactions 1 and 2, it is possible to compute reaction 3's equilibrium constant by multiplying reactions 1 and 2's equilibrium constant. In the instance of this issue, it is clear that the results of reaction 1 and reaction 2 both serve as the reactants for reaction 3 and its products, respectively. The equilibrium constant of reaction 3 at the same temperature as reactions 1 and 2 is therefore

K3 ⇒ K1 x K2.

It's vital to remember that the temperature might have an impact on the relationship between the equilibrium constants of a reaction, making it not always possible to combine reactions to produce a new equilibrium constant.

To know more about reaction please refer: https://brainly.com/question/28984750

#SPJ4

Answer:

Explanation: 4P+5O2-----2P2O5

The empirical formula for a compound is 2N2O if it contains 4 moles of oxygen and 10 moles of nitrogen. A compound is a material that results from the chemical bonding of two or more elements.

The two types of bonding that hold the atoms of a molecule together most frequently are ionic and covalent. In chemistry, a substance's empirical formula is the simplest whole number ratio of the atoms that are present in it. The simple illustration of this concept is the empirical formula of sulphur monoxide, which is just NO.

Nitrogen = 10/14 = 0.71 M of nitrogen = 4/16 = 1/4 = 0.2 M of oxygen

Atomic mass is equal to 0.2/0.2 and 1

Atomic mass = 0.71/0.2 = 3.6, or around 4, and empirical formula = 2N2O.

Learn more about empirical formula here

https://brainly.com/question/14044066

#SPJ4

It's possible that the substances will react to form the product when the substance is heated. The kinetic energy of a substance will increase when heated. Therefore, choice E is the right one.

A chemical reaction is the process by which one or more reactants are changed into products, which are new substances. Depending on the reactants, the substances are either chemical elements or compounds.

Since an increase in temperature typically speeds up a reaction by raising the average kinetic energy of the reactant molecules in a solution, heating the solution will cause the formation of product. This will increase the frequency at which different substances in a solution collide, which will cause products to form.

Learn more about Chemical reaction here:

brainly.com/question/29762834

#SPJ4

Complete question:

A chemist is trying to get two substances to react, but he is unsuccessful. He knows that the two substances should react with one another. Which of the following could he do to possibly get the substances to react? (Select all that apply)

a

increase the concentration of one of the substances

b

crush up one of the substances

c

decrease the concentration of one of the substances

d

cool the substances

e

heat the substances

Answer:

Explanation: Cl2 + 2NaBr ------ 2Nacl+Br2

3H2+N2--------2NH3

2Na+Br2-----2NaBr

Cucl2+H2S----cuS+2Hcl

2Hgo+Cl2-----2Hgcl+O2

C+2H2-----CH4

Answer: Green bubble --> Ba2+, Red bubble --> Cl-1, Blue bubble --> Fe2+, Yellow bubble --> OH-1, Solid --> Fe(OH)2 precipitate

What happens when you mix an aqueous solution of barium hydroxide and an aqueous solution of ferric chloride?

A mixture of aqueous barium hydroxide and aqueous ferric chloride gives barium chloride and ferric hydroxide. This reaction is shown below.

Ba(OH)2 (aq) + FeCl2 (aq)--> BaCl2(aq) + Fe(OH)2 (ppt)

Explanation:

Therefore, after reaction in an aqueous solution, there is 1 equivalent of free Ba2+ ions, 2 equivalents of free Cl-1 and Fe(OH)2 ppt. Fe(OH)2 precipitates with 1 equivalent of Fe2+ and 2 equivalents of OH-1 ions.

Hence,

Green bubble--> Ba2+

Red bubble --> Cl-1

Blue bubble --> Fe2+

Yellow bubble --> OH-1

Solid = Fe(OH)2 precipitate

To learn more about Chemical Reactions, click on the given link: https://brainly.com/question/11231920

#SPJ4

One reason why nitrogen is typically present in the largest quantity in inorganic fertilizer is because it is an essential nutrient for plant growth.

What are fertilizers?

Fertilizer is a substance added to soil to provide plants with essential nutrients such as nitrogen, phosphorus, and potassium. The primary purpose of fertilizer is to increase crop yields and improve the overall health of plants. Fertilizers can be organic or inorganic.

Nitrogen is a key component of chlorophyll, the molecule in plants that allows them to absorb light and use it to photosynthesize. Without sufficient nitrogen, plants cannot produce enough chlorophyll and will not grow well. Nitrogen is also necessary for the production of amino acids, which are the building blocks of proteins, and for the synthesis of nucleic acids, which are necessary for cell growth and replication.

Another reason is that Nitrogen is abundant in the atmosphere, comprising 78% of it, and is relatively easy to convert to a form that can be used by plants. Nitrogen can be converted to ammonia, which is a common ingredient in inorganic fertilizers, through the Haber-Bosch process, which uses high temperatures and pressures to combine nitrogen and hydrogen.

Additionally, Nitrogen is relatively cheap and easy to produce, making it a cost-effective choice for fertilizer manufacturers.

In summary, Nitrogen is an essential element for plant growth, abundant and relatively easy to convert to a form that can be used by plants and cost-effective, that's why it is present in the largest quantity in inorganic fertilizers.

To learn more about fertilizers from the given link:

https://brainly.com/question/22283073

#SPJ4

Answer:

Explanation:

aluminum

Answer: The aluminum ion

Explanation:

(a) The speed of the ball just after the collision is 0.13636 m/s. (b) The speed of the block just after the collision is 0.272728 m/s.

(a) The speed of the ball just after the collision can be found using the conservation of momentum principle. Before the collision, the momentum of the system is zero (since the block is at rest). After the collision, the momentum of the system is equal to the momentum of the ball and the block moving together.

Let vf be the final velocity of the ball and block after the collision. Then, the initial momentum of the system is 0, and the final momentum is given by:

= 0.400 kg x vf + 2.00 kg x vf

= (0.400 kg + 2.00 kg) x vf

By solving, we get:

vf = 0.400 kg / (0.400 kg + 2.00 kg) x √(g x 0.600 m)

vf = 0.1732 x √(g x 0.600 m)

The speed of the ball just after the collision is given by:

v = vf x 0.400 kg / (0.400 kg + 2.00 kg)

= 0.1732 x √(g x 0.600 m) x 0.400 kg / 2.400 kg

= 0.0726 x √(g x 0.600 m)

= 0.0726 x √(9.8 x 0.600)

= 0.0726 x 1.8782971

= 0.13636 m/s

(b) The speed of the block just after the collision is given by:

v = vf x 2.00 kg / (0.400 kg + 2.00 kg)

= 0.1732 x √(g x 0.600 m) x 2.00 kg / 2.400 kg

= 0.1452 x √(g x 0.600 m)

= 0.1452 x √(9.8 x 0.600 m)

= 0.1452 x 1.8782971

= 0.272728 m/s

To know more about speed please refer: https://brainly.com/question/11806405

#SPJ4

The amount of precipitate produced in mg/l and kg/day is 57.2753 kg.

Precipitation is the process of changing a dissolved substance from a super-saturated solution to an insoluble solid in an aqueous solution.

Chemical feed rate :

60 mg per liter we need

60 grams per one m3

60 x 3800 grams = 228 kg per 3800 m³

Since the water flow per day is 3800 m³, alum consumption per day is 228 kg

Alkalinity: The alkalinity requirement for alum is 0.49 mole of alkalinity per one mole of alum. The precipitate formed: For one mole of alum, 2 moles of Al(OH)₃ will form.

So 621 g of alum reacts to form

2 x 78 g of Al(OH)₃ precipitate

228 x 1000g will form:

(228 x 1000 x 156)/621 = 57.2753 kg per day precipitate

Therefore, the amount of precipitate produced in mg/l and kg/day is 57.2753 kg.

To learn more about precipitate, refer to the link:

https://brainly.com/question/14690742

#SPJ1

The question is incomplete. Your most probably complete question is given below:

Natural water with a flow of 3800 m3/d is to be treated with an alum dose of 60 mg/L.

The incorrect statements are option (a) 1 and 2 :

1. Although ice, water and water vapor all look different and display different physical properties, they are chemically the same.

2. During burning of a candle, both physical and chemical changes take place.

Although ice, water and water vapor all look different and display different physical properties, they are chemically the same. This statement is incorrect. Ice, water, and water vapor are all forms of water, but they are not chemically the same. They have different physical properties such as state, shape, and temperature.

Therefore, During burning of a candle, both physical and chemical changes take place. This statement is incorrect. Burning of a candle is a chemical change, where the wax is broken down into smaller molecules and is converted into carbon dioxide, water vapor and other gases.

Learn more about physical properties from

https://brainly.com/question/12330204

#SPJ1

Some have an outer layer of complex polysaccharide and some have an outer layer of protein.

What is meant by polysaccharide?

To learn more about polysaccharide refer to

https://brainly.com/question/14918481

#SPJ4

Taking into account definition of the reaction stoichiometry, potassium chlorate is the limiting reactant and 31.5 moles of CO₂, 28.875 moles of H₂O and 21 moles of KCl are formed when 3.5 moles of C₁₂H₂₂O₁₁ are mixed with 21.0 moles of KClO₃.

In first place, the balanced reaction is:

C₁₂H₂₂O₁₁ (s) + 8 KClO₃ (s) → 12 CO₂ (g) + 11 H₂O (g) + 8 KCl (s)

By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:

The limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction.

To determine the limiting reagent, the following rule of three can be applied: if by stoichiometry 1 mole of C₁₂H₂₂O₁₁ reacts with 8 moles of KClO₃, 3.5 moles of C₁₂H₂₂O₁₁ reacts with how many moles of KClO₃?

moles of KClO₃= (8 moles of KClO₃×3.5 moles of C₁₂H₂₂O₁₁)÷1 mole of C₁₂H₂₂O₁₁

moles of KClO₃= 28 moles

But 28 moles of KClO₃ are not available, 21 moles are available. Since you have less moles than you need to react with 3.5 moles of C₁₂H₂₂O₁₁, KClO₃ will be the limiting reagent.

Considering the lomiting reactant, he following rules of three can be applied:

moles of CO₂= (21 moles of KClO₃×12 moles of CO₂)÷8 mole of KClO₃

moles of CO₂= 31.5 moles

moles of H₂O= (21 moles of KClO₃×11 moles of H₂O)÷8 mole of KClO₃

moles of H₂O= 28.875 moles

moles of KCl= (21 moles of KClO₃×8 moles of KCl)÷8 mole of KClO₃

moles of KCl= 21 moles

Finally, 31.5 moles of CO₂, 28.875 moles of H₂O and 21 moles of KCl are formed.

Learn more about the reaction stoichiometry:

brainly.com/question/24741074

#SPJ1

Answer:

37.36 degrees Celsius

Explanation:

The temperature change of a substance can be calculated using the formula:

ΔT = Q / (m * Cp)

Where:

ΔT is the change in temperature (in degrees Celsius)

Q is the heat added or removed (in calories)

m is the mass of the substance (in grams)

Cp is the specific heat capacity of the substance (in calories per gram per degree Celsius)

For a 60g sample of iron with a specific heat of 0.214 cal/g*C and 2000 calories added to it, the temperature change would be:

ΔT = 2000 / (60 * 0.214) = 37.36 degrees Celsius

The non - terminal alkynes gives the carboxylic acid on the oxidative cleavage by the KMnO₄ or O₃.

The non - terminal alkynes have the triple bond in any positions other than the end position. The non - terminal alkynes gives carboxylic acid on the oxidative cleavage by the KMnO₄ or O₃. The oxidative cleavage is the reaction in which carbon - carbon bond cleaved with the oxidation of the carbons. The ozonolysis is the method of the oxidative cleavage of the alkynes and the alkene.

The alkyne ozonolysis is the example of an oxidative ozonolysis. The O₃ is the reactive allotrope of oxygen.

To learn more about oxidative cleavage here

https://brainly.com/question/30214476

#SPJ4

When the drops of acid or base were added to the water versus when the drops were added to the phosphate buffer, the pH changed considerably unlike in the phosphate buffer.

This is because the buffer neutralizes the drops of acid or base added to it.

A buffer solution is an acidic or basic aqueous solution made up of a mixture of a weak acid and either its conjugate base or base and its conjugate acid. A little bit of a strong acid or base applied to it barely affects its pH.

Hence, when drops of acid or base are added to a buffer such as a phosphate buffer, there is no observable change in the pH of the buffer solution. However, a considerable change in pH occurs when drops of an acid or base are added to water.

Learn more about buffer solutions at: https://brainly.com/question/13539106

#SPJ1

a. CyH6 - Molecular solid, b. Na - Ionic solid, c. SiO2 - Covalent solid, d. Co - Metallic solid, e. N2O - Molecular solid, f. NaNO3 - Ionic solid, g. Al - Metallic solid, h. C(diamond) - Covalent solid, i. SO2 - Molecular solid

CyH6, N2O, and SO2 are molecular solids, as these compounds are composed of individual molecules that are held together by weak intermolecular forces. Na is an ionic solid, as it is composed of positively charged sodium ions and negatively charged chloride ions held together by strong electrostatic forces. SiO2 is a covalent solid, as it is composed of individual Si-O covalent bonds.Co is a metallic solid, as it is composed of a metallic lattice of metal atoms held together by metallic bonds. NaNO3 is an ionic solid, as it is composed of positively charged sodium ions and negatively charged nitrate ions held together by strong electrostatic forces.

learn more about molecular solids here:

https://brainly.com/question/12866243

#SPJ4

The molecules that are polar among the given options are as follows:

NBr₃

CH₃Cl

Polar molecules are formed when one end of the molecule is said to possess more positive charges and whereas the opposite end of the molecule has negative charges, creating an electrical pole.

In polar molecules, the distribution of electrons between the covalently bonded atoms is not even.

The N–Br bond in NBr₃ is polar because the electrons that are shared between the two atoms are concentrated in the Br atom.

CH₃Cl is polar because the C-Cl bond is polar, the CH₃Cl has a net dipole, so CH₃Cl is polar.

PCl₅, CH₄, N₂ are said to be non polar because, as a bond is formed between the two atoms, there is no difference in their electronegativity and the net dipole moment becomes zero.

Learn more about polarity at: https://brainly.com/question/3184550

#SPJ1

Heterogeneous mixtures easily separated into its components by simple techniques suchas filtering or decanting.

What is meant by filtering ?

To learn more about filtering refer to

https://brainly.com/question/23945157

#SPJ4

All the given reactions are heterogeneous reactions.

How to determine whether the reaction is homogeneous or heterogeneous?

A reaction is classified as homogeneous or heterogeneous based on the phases of the reactants and products involved. A homogeneous reaction is one that occurs in a single phase, while a heterogeneous reaction is one that occurs across different phases. For example, if a reaction involves a solid, liquid, and gas, then it would be considered heterogeneous.

Part A: 3NO(g)⇌N2O(g)+NO2(g)

Kc = [N2O][NO2]^3 / [NO]^3

This reaction is heterogeneous because it involves a change in the number of moles of gas on both sides of the equation.

Part B: 3NO(g)⇌N2O(g)+NO2(g)

reaction is heterogeneous

Part C: CH4(g)+2H2S(g)⇌CS2(g)+4H2(g)

Kc = [CS2][H2]^4 / [CH4][H2S]^2

This reaction is heterogeneous because it involves a change in the number of moles of gas on both sides of the equation.

Part D: CH4(g)+2H2S(g)⇌CS2(g)+4H2(g)

The reaction is heterogeneous.

To learn more about chemical reactions refer:

brainly.com/question/11231920

#SPJ4

A liquid's density is a measure of how heavy it is in relation to its measured volume.

Liquid density = 1.17 g / cm^3.

Mass of Liquid = 3.02 kg

1 kg = 1000 g

So, 3.02 kg = 3020.0 g

Using the formula

density of liquid = (mass of liquid) / (volume of the liquid)

By modifying above formula, which gives

volume of the liquid = (mass of liquid) / (density of liquid)

Now, put a value in an expression

Which gives, volume of the liquid = (3020.0 g) / (1.17 g / cm^3)

          = 2581.197 cm^3

As, 1 cm^3 = 0.001 L

Therefore, 2581.197 cm^3 = 2.581197 L

Therefore, the liquid volume is 2.581197 L.

Learn more about the density here:

https://brainly.com/question/17780219

To find the volume of the liquid in liters, we can use the formula of density the volume of 3.02 kg of the liquid is approximately 2.58 liters.

Given to us is

Mass = 3.02 kg

Density = 1.17 g/cm³

The formula is:

Volume = Mass / Density

First, we need to convert the mass to grams:

3.02 kg = 3,020 g

Next, we can substitute the values into the formula:

Volume = 3,020 g / 1.17 g/cm³

To convert the volume from cubic centimeters (cm³) to liters (L), we need to divide by 1000 (since 1 L = 1000 cm³):

Volume = (3,020 g / 1.17 g/cm³) / 1000

Calculating this expression, we find:

Volume ≈ 2.58 L

Therefore, the volume of 3.02 kg of the liquid is approximately 2.58 liters.

Learn more about density here:

https://brainly.com/question/29775886

#SPJ 4

The redox reaction occurring in acidic aqueous solution is BrO3(aq) + 6N2H4(g) → 3Br-(aq) + 3N2(g).

The redox reaction occurring in acidic aqueous solution is: BrO3(aq) + N2H4(g) → Br-(aq) + N2(g)

To balance this redox equation, we need to ensure that the number of atoms of each element is the same on both sides of the equation. Additionally, we need to make sure that the charge is balanced on both sides of the equation.

The unbalanced equation looks like this:

BrO3(aq) + N2H4(g) → Br-(aq) + N2(g)

We can start by balancing the elements:

BrO3(aq) + N2H4(g) → Br-(aq) + N2(g)

Now we can balance the charge:

BrO3(aq) + N2H4(g) → Br-(aq) + N2(g)

Finally, we can check that the number of atoms of each element is the same on both sides of the equation.

The balanced equation is:

BrO3(aq) + 6N2H4(g) → 3Br-(aq) + 3N2(g)

The balanced equation shows that 6 molecules of N2H4 and 3 BrO3 are required to produce 3 Br- and 3 N2.

To know more about redox reaction please refer: https://brainly.com/question/13293425

#SPJ4

The electromagnetic spectrum and the atomic emission spectra are both related to the study of light and its properties. When an atom absorbs energy, electrons move to a higher energy level, and when they return to a lower energy level, they release energy in the form of light.

The electromagnetic spectrum is a range of all types of electromagnetic radiation, including radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays. These types of radiation have different wavelengths, frequencies, and energy levels. The electromagnetic spectrum is a continuous spectrum, with no clear boundaries between the different types of radiation.On the other hand, atomic emission spectra refer to the light emitted by atoms when they are excited. The light emitted by atoms is always specific to the element and the energy level of the atom. . This light is specific to the element and the energy level of the atom, and it results in a line spectrum, which is made up of specific and discrete lines of different colors.In summary, the electromagnetic spectrum is a continuous range of all types of electromagnetic radiation, while atomic emission spectra refer to the specific light emitted by atoms when they are excited, resulting in a discrete line spectrum. The electromagnetic spectrum provides an overview of all types of radiation and their characteristics, while atomic emission spectra allow for the identification of specific elements by analyzing the light they emit.

To learn more about electromagnetic spectrum here:

https://brainly.com/question/23727978

#SPJ4

The one which helps to  establish the concentration gradient necessary for this process to occur is the Na⁺/K⁺ pump.

During neuronal signaling, a change in the membrane potential will cause the  sodium channels to open and let the Na⁺ ions diffuse down the concentration gradient into the cell. The sodium - potassium pump is an enzyme. The sodium - potassium pump helps to maintain the osmotic equilibrium and the potential in the cells.

Thus, the Na⁺/K⁺ pump helps to  establish the concentration gradient necessary for this process to occur.

To learn more about concentration gradient here

https://brainly.com/question/13978288

#SPJ4

In the given images structure 1 represents pure element, structure 2 represents heterogenous and structure 3 represents homogenous structure, respectively.

A Pure element is a structure that is made up of only one kind of particle. Homogenous mixture is a mixture that contain same proportion of its components while heterogenous mixture is a mixture that contains unequal proportion of the component.

Given, blue circle represents an atom and red square represents an atom of second type of element.

In the structure given in 1st, half part of sphere contains blue atom and another half contain another type of atom(red). Thus, the structure is an example of pure element.

In the 2nd structure, Blue and Red elements are mixed together in an unequal amount in a sample. Thus, it is an example of heterogenous structure.

In 3rd structure, number of two type of atoms are same. Thus, it is an example of homogenous structure.

Therefore, the provided structure represents pure element, heterogenous structure, and homogenous structure, respectively.

Learn more about homogenous mixture here;

https://brainly.com/question/24898889

#SPJ12

Krista can stay 9 nights in Florida if she saves $3,500.

The graph of a linear function is a straight line. The following is the form of a linear function.

a + bx = y = f(x).

One independent variable and one dependent variable make up a linear function. x and y are the independent and dependent variables, respectively.

Given:

Krista is saving money to visit her relatives in Florida.

It costs $1,250 for the plane ticket and $250 per night for the hotel.

Using the function that represents the cost c based on the number of nights n Krista spends in Florida,

f(x) = 250x + 1250.

If f(x) = 3500,

250x + 1250 = 3500

250x = 2250

x = 9

Therefore, she can stay for 9 nights.

To learn more about the linear function;

brainly.com/question/20286983

#SPJ1

The percent by mass composition of c (carbon) in the compound ch4 is 10%.

As an example, let's look at methane, or CH4. Methane's formula weight is [12.01 + (4 x 1.008)] = 16.04 (grams per cubic meter). Methane has a mass that is made up of (12.01/16.04) x 100 = 74.87% carbon and (4.032/16.04) x 100 = 25.13% hydrogen.

Sulfuric acid's percentage makeup of each element: Hydrogen% is equal to (2.016/98.07) x 100, or 2.0556%. Sulfur% = 32.06 98.07 100 = 32.69% Oxygen% = (63.996/98.07) 100 = 65.25%.

(1) CO = 80% CH, equals 20%; (2) CO = 90% CH4 = 10%.

Confirm that about 82.6% of C4H10's mass is made up of carbon. The molar masses of hydrogen and carbon on the periodic table are, respectively, 12.0 and 1.01.          

To learn more about percent by mass refer to:

https://brainly.com/question/26150306

#SPJ4

Inter-molecular interactions between gas particles have a stronger influence on the properties as pressure rises.

Fluoridated gases have the longest atmospheric lifetime. In a gas, the particles are dispersed. They resemble a "ideal gas," where there is little particle interaction and collisions are completely elastic, under normal pressure and at low temperatures. Inter-molecular interactions between gas particles have a stronger influence on the properties as pressure rises. Because of the space between atoms or molecules, the majority of gases are transparent.  Like fluorine and chlorine, some of them have almost no color. Gases usually exhibit weaker responses to electric and gravitational fields than other forms of matter. Gases are less dense and more viscous than liquids and solids.

Learn more about Fluoridated gases here:

https://brainly.com/question/29666148

#SPJ4