amount of heat consumed in a reaction is ---- to the amount of hear lost by solution

The value of the Keq for decomposition reaction of BrCl at 298 K is 0.8.

The decomposition reaction of BrCl can be written as follows;

BrCl(g) ⇌ Br(g) + Cl(g)

Equilibrium constant expression for this reaction is;

[tex]K_{eq}[/tex] = [Br(g)][Cl(g)] / [BrCl(g)]

After the system we reached at equilibrium, 42% of the original BrCl sample has been decomposed. This means that the concentration of BrCl at equilibrium is 58% of its original concentration. Let's assume that the initial concentration of BrCl is "x". Then, at equilibrium, the concentration of BrCl is 0.58x.

The concentration of Br and Cl at equilibrium is equal to the concentration of BrCl that decomposed. Since the stoichiometric coefficients of Br as well as Cl in balanced equation are both 1, their concentrations are also 0.58x.

Now we can substitute equilibrium concentrations into the equilibrium constant expression and solve for [tex]K_{eq}[/tex];

[tex]K_{eq}[/tex] = [Br][Cl] / [BrCl]

[tex]K_{eq}[/tex] = (0.58x)(0.58x) / (x - 0.58x)

[tex]K_{eq}[/tex] = 0.336x / 0.42x

[tex]K_{eq}[/tex] = 0.8

Therefore, the value of Keq is 0.8.

To know more about decomposition reaction here

https://brainly.com/question/8009068

#SPJ1

The actions permitted in balancing a chemical equation are inserting coefficients in front of formulas of reactants and products and multiplying all coefficients by a common factor.

Balancing a chemical equation involves making sure that the number of atoms of each element is equal on both sides of the equation. This is done by inserting coefficients in front of formulas of reactants and products, which indicates the number of molecules or atoms of each substance involved in the reaction. Multiplying all coefficients by a common factor is also permitted, as long as it does not alter the relative ratios of the coefficients.

Adding reactants or products and altering the formulas of reactants or products are not permitted in balancing a chemical equation, as they would result in a different chemical reaction.

To know more about balancing a chemical equation, visit:

https://brainly.com/question/28294176

#SPJ11

A conjugate acid-base pair is composed of two species that are related to each other through the transfer of a proton. In this case, the species that can donate a proton is called the acid, and the species that can accept a proton is called the base.

Therefore, the conjugate acid-base pairs are as follows:
- HNO3 / NO3- : Nitric acid (HNO3) is the acid that donates a proton, while nitrate ion (NO3-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
- H3O+ / OH- : Hydronium ion (H3O+) is the acid that donates a proton, while hydroxide ion (OH-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
- H2SO4 / SO42- : Sulfuric acid (H2SO4) is the acid that donates a proton, while sulfate ion (SO42-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
- H3PO4 / HPO42- : Phosphoric acid (H3PO4) is the acid that donates a proton, while hydrogen phosphate ion (HPO42-) is the base that accepts a proton. Thus, they form a conjugate acid-base pair.
In summary, all of the given options are conjugate acid-base pairs.

learn more about acid here

https://brainly.com/question/26775834

#SPJ11

Sulfur and oxygen are nonmetals and tend to form covalent compounds instead of ionic compounds. When sulfur and oxygen combine, they form sulfur dioxide (SO₂) or sulfur trioxide (SO₃) which are covalent compounds. the pair of elements that will not form ionic compounds are sulfur and oxygen, option (a).

b. Sodium and calcium are both metals that readily form cations and can form ionic compounds with anions. Sodium forms a +1 cation, while calcium forms a +2 cation. They can form ionic compounds with negatively charged anions such as chloride, oxide, or sulfide.

c. Sodium is a metal that readily forms a cation while sulfur is a nonmetal that can form an anion. Thus, they can form an ionic compound, sodium sulfide (Na₂S).

d. Barium is a metal that readily forms a cation, while chlorine is a nonmetal that can form an anion. Thus, they can form an ionic compound, barium chloride (BaCl₂).

To learn about ionic compounds:

https://brainly.com/question/15300703

#SPJ4

pH of solution after addition of LiOH to HClO4 is approximately 1.00.

What is the pH of a solution obtained by titrating 100.0 mL of 0.18 M HClO4 with 0.27 M LiOH and adding 30.0 mL of LiOH?

First, let's write the balanced chemical equation for the reaction between HClO4 and LiOH:

HClO4 + LiOH -> LiClO4 + H2O

Next, we can use stoichiometry to determine how much HClO4 and LiOH react. Since the concentration of LiOH is 0.27 M and the volume added is 30.0 mL (0.0300 L), the moles of LiOH added is:

moles of LiOH = concentration x volume = 0.27 M x 0.0300 L = 0.00810 moles

Since the stoichiometry of the balanced equation tells us that the ratio of HClO4 to LiOH is 1:1, we know that the moles of HClO4 consumed by the reaction is also 0.00810 moles.

The initial moles of HClO4 in solution is:

moles of HClO4 = concentration x volume = 0.18 M x 0.1000 L = 0.0180 moles

Therefore, after the addition of LiOH, the total moles of HClO4 in solution is:

total moles of HClO4 = initial moles - moles consumed by LiOH = 0.0180 moles - 0.00810 moles = 0.00990 moles

Calculation of the pH of the solution, we determine the concentration of H+ ions. Since HClO4 is a strong acid, it completely dissociates in water to form H+ and ClO4- ions. Therefore, the concentration of H+ ions is equal to the concentration of HClO4:

[H+] = 0.00990 moles / 0.1000 L = 0.0990 M

Now using the the equation of pH of a solution:

pH = -log[H+]

pH = -log(0.0990)

pH = 1.00

Therefore, the pH of the solution after the addition of 30.0 mL of LiOH is approximately 1.00.

To learn more about pH of solution, visit: https://brainly.com/question/172153

#SPJ4

In order to react, the particle participating in a chemical reaction must collide in the correct orientation. This statement is true.

For a chemical reaction to occur, the participating particles must collide with each other. However, in addition to having sufficient energy to overcome the activation energy barrier for the reaction, the particles must collide with the correct orientation or geometry. The orientation of the colliding particles is crucial as it affects the way chemical bonds between atoms are formed or broken during the reaction.

Therefore, the correct orientation of particles is necessary for the reaction to proceed, and without it, the reaction may not occur or may result in a different product.

To learn about collision:

https://brainly.com/question/13028076

#SPJ4

[tex]H_{2} CO_{3}[/tex] is a weak acid, and [tex]HCO_{3} ^{-}[/tex] is a weak base accurately describes these molecules.

C is the correct answer.

When carbon dioxide dissolves in water, a weak acid called carbonic acid [tex]H_{2}CO_{3}[/tex] results in solution. With the chemical formula , bicarbonate is [tex]HCO_{3} ^{-}[/tex] created when three oxygen atoms combine with a hydrogen atom and a carbon atom.

[tex]HCO_{3} ^{-}[/tex], also referred to as bicarbonate, is the conjugate acid of the carbonate ion and the conjugate base of the weak acid [tex]H_{2} CO_{3}[/tex]. When mixed with a substance that has a bigger Ka value than it does, [tex]HCO_{3}^{-}[/tex] behaves as a base, and when mixed with a substance that has a smaller Ka value, it behaves as an acid.

Learn more about weak acid and weak base:

https://brainly.com/question/22104949

#SPJ4

a) The volume of butane that can be produced by the reaction at STP is 6.25 L. b) There is no excess hydrogen gas, all of it was used up in the reaction.

The reaction which is given in the question is the balanced equation for the reaction i.e:

[tex]4C + 5H_2 \rightarrow C_4H_{10}[/tex]

a) To find the volume of butane that is produced at STP, we the number of moles of each reactant that is taking part in the reaction.

We can calculate the moles of the reactants using the formula:

PV=nRT

we can also write the equation as n=PV/RT

Substituting the values in the formula above we get

n = PV/RT

n = (1 atm)(17.75 L)/(0.0821 L·atm/mol·K)(273 K) = 0.831 mol [tex]H_2[/tex]

Now we need to find the moles of Carbon by using the formula:

n=m/M; where m is the mass of carbon and M is the molar mass of carbon.

Molar mass of carbon= 12/01 g/mol

n=13.45 g/12.01 g/mol = 1/12 mol C

Now we can see that the balanced equation that is given to us has a 4:5 ratio of carbon to hydrogen, Now we need to find the moles of butane that are produced from 1.12 mol of carbon:

Now we can see that 4 mol of C produces 1 mol of  [tex]C_4H_{10}[/tex]

So, 1 mol of C produces 1/4 mol of [tex]C_4H_{10}[/tex]

Now 1.12 mol of C will produce (1/4) * 1.12 mol of [tex]C_4H_{10}[/tex]

which is = 0.28 mol of [tex]C_4H_{10}[/tex].

Now with the help of ideal gas law, we can calculate the volume of butane at STP:

PV=nRT

V=nRT/P = (0.28 mol)(0.0821 L·atm/mol·K)(273 K)/(1 atm) = 6.25 L

Therefore the butane produced in the reaction at STP is 6.25 L.

b) In the reaction given above we can see that Carbon is the limiting reactant, what we need to do is to find out how much Hydrogen can be used to react with all the provided carbon. We know that 4 mol of carbon reacts with 5 mol of hydrogen gas. Therefore, the number of moles of Hydrogen gas required to react with 1.12 mol o carbon is :

(5/4) × 1.12 mol = 1.4 mol [tex]H_2[/tex]

We are provided with 0.831 mol of hydrogen gas, which is less than the amount required to react with all the carbon. So, hydrogen can be considered as the excess reactant here.

Now we are asked to find out how much Hydrogen gas is leftover, for which we can subtract the amount which is required to react with all of the carbon from the initial amount:

0.831 mol H2 - 1.4 mol H2 = -0.569 mol [tex]H_2[/tex]

This negative value above depicts that there is no leftover Hydrogen gas at all which means all the hydrogen gas is used up in the reaction.

Learn more about the Ideal Gas law at:

https://brainly.com/question/25290815

#SPJ1

The expected rate law expression for the proposed mechanism is:

Rate = k [H₂O₂] [I⁻] [H⁺]. The experimental data can be consistent with the proposed mechanism if the observed rate law matches the expected rate law expression.

What is the expected rate law expression and consistency test for the proposed mechanism?

Expected rate law expression and consistency test for the reaction mechanism of hydrogen peroxide with iodide ion in an acidic solution.

This is because the slowest step determines the overall rate of the reaction. The first step is the slow step and involves the reactants H₂O₂and I⁻. The presence of H⁺ ions in the third step also affects the reaction rate, as it is involved in the formation of the product I₂.

To test the consistency of the proposed mechanism with experimental data, we can perform initial rate experiments with varying concentrations of H₂O₂, I⁻, and H⁺. We should expect to see a linear relationship between the rate of the reaction and the concentration of each reactant raised to their respective order in the rate law expression.

If the experimental results agree with the expected rate law expression, then the proposed mechanism is likely valid. However, if the experimental results show non-linear relationships or orders different from those predicted by the rate law expression, then the proposed mechanism may need to be revised.

To learn more about rate law, visit:

https://brainly.com/question/16981791

#SPJ4

Glycerol-3-phosphate is derived from two primary sources that are glycolysis and the glycerol phosphate shuttle.

During glycolysis, glucose is metabolized into pyruvate, which can then be converted into acetyl-CoA, the precursor for fatty acid synthesis. Acetyl-CoA is used to produce glycerol-3-phosphate, which is then used as a backbone for triacylglycerol biosynthesis. The glycerol phosphate shuttle, which occurs in some tissues, such as adipose tissue and liver, converts dihydroxyacetone phosphate into glycerol-3-phosphate.

This conversion allows for the incorporation of fatty acids into triacylglycerol, which is then stored as a form of energy in adipose tissue. Overall, glycerol-3-phosphate serves as a crucial precursor for the biosynthesis of triacylglycerol, an important energy storage molecule in the body.

To know more about the Glycerol, here

https://brainly.com/question/31379250

#SPJ4

[tex]P^{3-}[/tex] ion will be formed by the phosphorus atom shown below when it has a stable set of valence electrons.

The Explanation is as follows:

Phosphorus can gain 3 electrons, giving it a total of 8 valence electrons. Nonmetallic elements typically gain electrons. [tex]P^{3-}[/tex] is the most stable monoatomic ion that can be created from phosphorus.

Learn more about Monoatomic ion:

https://brainly.com/question/29143691

#SPJ4

The complete question is:

What ion will be formed by the phosphorus atom shown below when it has a stable set of valence electrons?.

A. [tex]P^{5+}[/tex]

B. [tex]P^{3+}[/tex]

C. [tex]P^{5-}[/tex]

D. [tex]P^{3-}[/tex]

Buffer addition is an important step in column chromatography to ensure the proper separation of proteins and the removal of unwanted components.

What is Protein?

Proteins are large biomolecules, or macromolecules, that are essential to all forms of life. They are composed of long chains of amino acids, which are linked together by peptide bonds. The sequence of amino acids in a protein chain determines its unique structure and function.

Stabilize the pH: Buffer addition ensures that the pH of the column is at the desired value for the separation to occur.

Remove unwanted components: Buffer addition helps to remove any unwanted components that might interfere with the separation process, such as salts or other contaminants.

Learn more about Protein from the given link

https://brainly.com/question/884935

#SPJ4

The Valence Bond (VB) Theory is a quantum theory of chemical bonding which states that a chemical bond is formed when two atoms share a pair of electrons. The theory has three postulates:

Valence is a term used in psychology to describe the degree to which a person experiences an emotion, such as happiness or sadness. It is associated with the amount of pleasure or displeasure that one feels toward an event, object, or situation. Valence is measured on a scale from positive to negative, with positive emotions having a higher valence than negative emotions.

1. Hybridization: Hybridization is the process of combining atomic orbitals to form new hybridized orbitals with lower energy and new shapes. These hybrid orbitals are more stable and better suited for bonding than the original atomic orbitals.

2. Bond Formation: Bond formation occurs when two hybridized orbitals overlap and share a pair of electrons. This overlap creates a strong electrostatic attraction between the two atoms, which is the chemical bond.

3. Resonance: Resonance is the idea that the chemical bond between two atoms can be thought of as a combination of several different structures. These different structures can be represented by different resonance structures. Each resonance structure has a different energy and each can contribute to the overall strength of the bond.

To learn more about Valence

https://brainly.com/question/371590

#SPJ4

The total heat required to convert 15.00 g of ice at -6.00 °C to liquid water at 0.350 °C is 6897 J (rounded to 4 significant figures).

To calculate the total heat needed to convert ice to liquid water, we need to consider two different processes:

Heating the ice from -6.00 °C to 0.00 °C, which requires energy to increase the temperature of the ice.

Melting the ice at 0.00 °C, which requires energy to break the intermolecular bonds holding the ice together.

First, let's calculate the heat required to heat the ice from -6.00 °C to 0.00 °C using the formula:

q1 = m * c * ΔT

where q1 is the heat required, m is the mass of the ice, c is the specific heat capacity of ice, and ΔT is the change in temperature.

Plugging in the values, we get:

q₁ = 15.00 g * 2.087 J/(g*°C) * (0.00 °C - (-6.00 °C))

q₁ = 1873.46 J

Next, let's calculate the heat required to melt the ice at 0.00 °C using the formula:

q₂ = m * ΔHf

where q₂ is the heat required, m is the mass of the ice, and ΔHf is the heat of fusion of water, which is 333.55 J/g according to the reference table.

Plugging in the values, we get:

q₂ = 15.00 g * 333.55 J/g

q₂ = 5003.25 J

Finally, we need to calculate the heat required to heat the liquid water from 0.00 °C to 0.350 °C using the formula:

q₃ = m * c * ΔT

where q₃ is the heat required, m is the mass of the liquid water, and c is the specific heat capacity of liquid water, which is 4.184 J/(g*°C).

To calculate the mass of the liquid water, we need to use the formula:

m = m ice * (1 - Vf)

where Vf is the volume fraction of ice in the mixture, which we can find using the formula:

Vf = (Tfinal - 0.00 °C) / (Tfinal - Tinitial)

where Tinitial is the initial temperature (-6.00 °C) and Tfinal is the final temperature (0.350 °C).

Plugging in the values, we get:

Vf = (0.350 °C - 0.00 °C) / (0.350 °C - (-6.00 °C))

Vf = 0.0601

m = 15.00 g * (1 - 0.0601)

m = 14.0965 g

Now we can calculate q₃:

q₃ = 14.0965 g * 4.184 J/(g*°C) * (0.350 °C - 0.00 °C)

q₃= 20.6632 J

To find the total heat required, we add up q₁, q₂, and q₃:

qtotal = q₁+ q₂ + q₃

qtotal = 1873.46 J + 5003.25 J + 20.6632 J

qtotal = 6897.37 J

Therefore, the total heat required to convert 15.00 g of ice at -6.00 °C to liquid water at 0.350 °C is 6897 J (rounded to 4 significant figures).

To learn about liquid water

https://brainly.com/question/18761083

#SPJ4

1.09% is the percent yield as the solid baso4 is collected, dried, and found to have a mass of 2.54 g .

Define yield.

A chemical reaction's yield is determined by the ratio of the amount of product to the amount of reactant. most often represented as a percentage. Moles of product = % Yield.

The % ratio of the theoretical yield to the actual yield is known as the percent yield. It is calculated as the theoretical yield multiplied by 100% divided by the experimental yield. The percent yield is 100% if the theoretical and actual yields are equal.

The mass in grams of one mole of a chemical is its molar mass. A mole is the measurement of the number of things, such as atoms, molecules, and ions, that are present in a substance.

Molar mass of BaSO4 is 233 g/mol

Given mass is 2.54g

Percent yield will be 2.54/233 *100 i.e. 1.09%

To learn more about molar mass use:

https://brainly.com/question/837939

#SPJ4

Yes, we can tell if the F in PF₃ undergoes hybridization. The F atom in PF₃ is sp³ hybridized, meaning that it has four orbitals that are each a hybrid of 1s and 3p orbitals.

Hybridization is the process of combining two or more distinct entities to create a new, often superior, version of the original entities. The entities which are combined can vary in type; they can be two different species, two different genes, two different technologies, two different processes, two different materials, etc. It is a powerful tool for advancing research, development, and innovation in various fields. Hybridization can be used to create unique characteristics, qualities, and abilities that are not found in either of the parent entities.

This results in four sp₃ hybridized orbitals arranged in a tetrahedral shape, which allows the F atom to form three single bonds to the three P atoms in the molecule. This hybridization is necessary in order for the F atom to form these three bonds.

To learn more about hybridization

https://brainly.com/question/22765530

#SPJ4

∆Hf(NaCl) = -411 kJmol⁻¹ can be calculated using the Born-Haber cycle for NaCl. The cycle includes the formation of NaCl from its elements, which releases energy (-411 kJmol⁻¹), as well as other steps such as the ionization of sodium (+496 kJmol⁻¹), the electron affinity of chlorine (-349 kJmol⁻¹), and the lattice energy of NaCl (+787 kJmol⁻¹).

The Born-Haber cycle is a useful tool to understand the formation of ionic compounds such as NaCl. It takes into account the various energy changes that occur during the formation of the compound from its constituent elements. In this case, the negative value of ∆Hf indicates that the formation of NaCl is an exothermic process that releases energy.

The other values provided, such as the ionization energy of sodium and the electron affinity of chlorine, contribute to the overall energy change in the cycle. These values can be used to calculate the lattice energy of NaCl, which is a measure of the strength of the ionic bond between sodium and chlorine.

Overall, the Born-Haber cycle provides a comprehensive understanding of the energetics of ionic compound formation and can be used to calculate various thermodynamic properties of the compound.

Learn more about NaCl here:

https://brainly.com/question/1550455

#SPJ11

Answer:

To determine the limiting reactant, we need to compare the amounts of each reactant to their stoichiometric coefficients in the balanced chemical equation.

The balanced chemical equation for the reaction of P4 and O2 to form P4O10 is:

P4 + 5O2 -> P4O10

From the balanced equation, we see that 1 mole of P4 reacts with 5 moles of O2 to produce 1 mole of P4O10.

Given that we have 5 moles of P4 and 15 moles of O2, we can calculate the number of moles of P4O10 that could be produced if all the reactants were consumed.

For P4, the moles of P4O10 that could be produced = 5 moles P4 x (1 mole P4O10/1 mole P4) = 5 moles P4O10

For O2, the moles of P4O10 that could be produced = 15 moles O2 x (1 mole P4O10/5 moles O2) = 3 moles P4O10

Therefore, from the above calculations, we see that the amount of product that can be produced is limited by the amount of O2. Hence, O2 is the limiting reactant in this reaction.

Explanation:

Correct answer is (A) very weak base. When an acid donates a proton, it forms its conjugate base. Strong acids are those that completely dissociate in water to form H+ ions, leaving almost no molecules of the acid in solution.

A conjugate base is a species formed by the removal of a proton from an acid, as in the reverse reaction it is able to gain a hydrogen ion. Because some acids are capable of releasing multiple protons, the conjugate base of an acid may itself be acidic.Therefore, their conjugate bases have a negligible tendency to accept protons and act as bases. They are weak bases. Examples of strong acids and their conjugate bases are HCl (chloride ion), HNO3 (nitrate ion), and H2SO4 (hydrogen sulfate ion).

To know more about conjugate bases , click here:-

https://brainly.com/question/30225100

#SPJ11

 To solve this problem, we need to use the equation for the ionization of water:
H2O ⇌ H+ + OH-
This equation tells us that water can dissociate into hydrogen ions (H+) and hydroxide ions (OH-). In pure water, the concentrations of H+ and OH- are equal at 1.0 × 10-7 M each. However, in an aqueous solution of an acid or a base, the concentrations of H+ and OH- can change.

In this case, we are given the concentration of hydronium ion (H3O+) in a solution of potassium hydroxide (KOH). Since KOH is a strong base, it completely dissociates in water to form potassium ions (K+) and hydroxide ions (OH-):
KOH → K+ + OH-
Therefore, the concentration of OH- in the solution is equal to the concentration of KOH, which is not given. However, we can use the fact that the solution is neutral to find the missing concentration.
A neutral solution has a pH of 7, which means that the concentration of H+ is equal to the concentration of OH-:
[H+] = [OH-] = 1.0 × 10-7

Since we are given the concentration of H3O+, we can use the equation for the ion product of water (Kw) to find the concentration of OH-:
Kw = [H+][OH-] = 1.0 × 10-14
[H3O+][OH-] = 1.0 × 10-14
[OH-] = 1.0 × 10-14 / [H3O+]
[OH-] = 1.0 × 10-14 / 3.50 × 10-6
[OH-] = 2.86 × 10-9 M
Therefore, the hydroxide ion concentration in the aqueous potassium hydroxide solution is 2.86 × 10-9 M

To know more about ionization visit:-

https://brainly.com/question/28385102

#SPJ11

The direction of heat flow by conduction between two samples of the same material is from the sample with higher temperature to the sample with lower temperature.

Heat flow by conduction between two samples of the same material occurs from the hotter sample to the cooler sample. This is because heat energy is transferred from areas of higher temperature to areas of lower temperature. if two samples of the same material are at different temperatures, heat will flow from the hotter sample to the cooler sample until both samples reach the same temperature and thermal equilibrium is established.

what is temperature?

Temperature is a measure of the average kinetic energy of the particles (atoms or molecules) in a substance. It is a physical quantity that is commonly used to describe the hotness or coldness of an object, and is measured using various temperature scales such as Celsius, Fahrenheit, and Kelvin. When two objects are in contact and at different temperatures, heat flows from the hotter object to the colder object until they reach thermal equilibrium, i.e. they have the same temperature.

To learn more about kinetic energy visit:

brainly.com/question/26472013

#SPJ11

If the lid on the polystyrene cup had not been covering it during the experiment, much of the heat released by the neutralization process could have escaped into the atmosphere.

A calorimeter is a device used to measure the heat of chemical processes or physical changes, as well as heat capacity. Among the most frequent varieties are differential scanning calorimeters, isothermal micro calorimeters, titration calorimeters, and accelerated rate calorimeters.

Calorimeter Types

Learn more about Calorimeters here:

https://brainly.com/question/2963957

#SPJ1

A sample of solid tin is heated with an electrical coil. If 39.6 J of energy are added to a 14.3g sample initially at 24.2oC, what is the final temperature of the tin - 37.4oC.

The heat energy required to raise the temperature of the solid tin can be calculated using the formula:

q = mcΔT

where q is the heat energy, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.

Rearranging the formula, we get:

ΔT = q/(m*c)

Substituting the given values, we get:

ΔT = 39.6 J / (14.3 g * 0.21 J/g.oC) = 12.64 oC

Therefore, the final temperature of the tin is:

24.2 oC + 12.64 oC = 36.84 oC

Rounding off to one decimal place, the final temperature is approximately 37.4 oC. Therefore, the correct answer is (b) 37.4oC.

To know more about heat energy, click here:

https://brainly.com/question/25384702

#SPJ11

Pikaia is considered to be one of the most significant fossils found in the Burgess Shale due to its unique characteristics. It is the only known Burgess Shale fossil that possesses an internal nerve cord.

Pikaia was a small, worm-like creature that lived over 500 million years ago. It was about five centimeters long and had a slender, elongated body with a series of segments. Its internal nerve cord was located on the dorsal side of its body and extended the length of its body.

The presence of an internal nerve cord in Pikaia is significant because it is an early indication of the evolution of a central nervous system, which is a defining feature of most animals today. Pikaia is therefore considered to be an important transitional form in the evolution of animals.

Overall, Pikaia's unique characteristic of possessing an internal nerve cord makes it an important fossil in understanding the evolution of animals and the development of nervous systems.

To know more about fossil

brainly.com/question/31419516

#SPJ11

Therefore, the atomic mass of element x is approximately 40.47. It is important to note that this is a hypothetical element and may not actually exist in nature.

To find the atomic mass of element x, we need to first calculate the weighted average of the atomic masses of its isotopes, taking into account their respective abundances. We can use the following formula:
atomic mass of x = (% abundance of x-40 × atomic mass of x-40) + (% abundance of x-41 × atomic mass of x-41) + (% abundance of x-42 × atomic mass of x-42)
Plugging in the given values, we get:
atomic mass of x = (0.720 × 40) + (0.090 × 41) + (0.190 × 42)
atomic mass of x = 28.8 + 3.69 + 7.98
atomic mass of x = 40.47

To know more about atomic mass visit:
https://brainly.com/question/17067547

#SPJ11

The equivalent pressure in pascals is approximately 6894.75 Pa.

1 psi is equivalent to 6.89476 kPa.
So, to convert psi to pascals:
1 psi = 6.89476 kPa = 6.89476 x 10^3 Pa
Therefore, to find the equivalent pressure in pascals:
6.8 x 10^-2 atm = 6.8 x 10^-2 x 101325 Pa/atm = 6894.75 Pa
Therefore, the equivalent pressure in pascals is approximately 6894.75 Pa.

Pressure is defined as the amount of force applied per unit area. In the SI system, the unit of pressure is the Pascal (Pa), which is equal to one Newton per square meter (N/m²). This means that a pressure of 1 Pa is equivalent to a force of 1 Newton acting on an area of 1 square meter. Pressure can also be measured in other units, such as pounds per square inch (psi) or atmospheres (atm), but these are not part of the SI system. The Pascal is commonly used in physics, engineering, and other fields to express pressure, especially in relation to fluids and gases.

To learn more about Pressure, click here:
https://brainly.com/question/18431008

#SPJ11

The pH must be adjusted to -2.049 in order to get an electrode potential of -0.121 V when the partial pressure of hydrogen gas remains at 1 atm.

An electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit. It is used to make electrical connections, transmit electrical current, and measure electric potential. Electrodes are made from a variety of materials including metals, graphite, and plastics. They are used in many different applications, including welding, electrical engineering, energy storage, electroplating, and electrochemical processes.

The standard hydrogen electrode (SHE) is an electrode with a potential of 0 V when it is at a pH of 0.
This means that in order to get an electrode potential of -0.121 V, the pH must be adjusted to -0.121 V/ 59.16 mV/pH
= -2.049.
Therefore, the pH must be adjusted to -2.049 in order to get an electrode potential of -0.121 V when the partial pressure of hydrogen gas remains at 1 atm.

To learn more about electrode
https://brainly.com/question/30561781
#SPJ4

The pH of a solution is a measure of its acidity or basicity, and it is defined as the negative logarithm of the concentration of hydrogen ions (H+). In the case of a salt such as trimethylammonium nitrate, which is the product of a weak base (trimethylamine, (CH3)3N) and a strong acid (nitric acid, HNO3), the solution will be slightly acidic.

This is because the cation (trimethylammonium, (CH3)3NH+) is a weak acid that can donate a proton (H+) to water, producing hydronium ions (H3O+). The anion (nitrate, NO3-) is a spectator ion that does not affect the pH.

To calculate the pH of a 0.15 M solution of trimethylammonium nitrate, we need to know the acid dissociation constant (Ka) of the trimethylammonium cation. This value can be found in a table or calculated using the equilibrium constant expression for the acid-base reaction:

(CH3)3NH+ + H2O ⇌ (CH3)3N + H3O+

Ka = [ (CH3)3N ][ H3O+ ] / [ (CH3)3NH+ ]

Assuming that the equilibrium concentration of (CH3)3NH+ is equal to the initial concentration (because it is a weak acid), and using the value of Ka = 4.3 x 10^-10, we can solve for [H3O+]:

Ka = [ (CH3)3N ][ H3O+ ] / [ (CH3)3NH+ ]
4.3 x 10^-10 = [ x ][ x ] / 0.15
x = 3.4 x 10^-6 M

Therefore, the concentration of hydronium ions in the solution is 3.4 x 10^-6 M, and the pH can be calculated as:

pH = - log [H3O+]
pH = - log (3.4 x 10^-6)
pH = 5.34

Therefore, the pH of a 0.15 M solution of trimethylammonium nitrate is 5.34, indicating that it is slightly acidic.

To know more about trimethylammonium please visit....

brainly.com/question/30884996

#SPJ11

Hydrocarbons [tex]C_{n} H_{2n+2}[/tex] When hydrocarbons are burned to create energy, the byproducts include carbon dioxide, which is produced by gasoline-burning engines and contributes to the rise in greenhouse gases.

Any hydrocarbon can be burned with oxygen to produce three byproducts: carbon dioxide, water, and heat, as illustrated in the general reaction below. When hydrocarbons are burned with oxygen ([tex]O_{2}[/tex]) present, carbon dioxide ([tex]CO_{2}[/tex]) and water ([tex]H_{2} O[/tex]) are produced. Carbon monoxide (CO) may also be released during the burning of hydrocarbons if there is an imbalance between the amount of carbon and oxygen present. Occasionally, incomplete combustion results in the release of unburned hydrocarbons into the atmosphere.

Read more about burns gasoline at

https://brainly.com/question/14745254

#SPJ4

An example of monomers that undergo step growth polymerization is the reaction between dicarboxylic acid and a diamine to form a polyamide.

A monomer that undergoes chain growth Polymerization is the process that occurs between ethylene monomers to generate polyethylene.

(i) The monomers can be represented as HOOC-R-COOH and NH₂-R'-NH₂, where R and R' are different organic groups. The reaction between these monomers results in the formation of a polyamide, commonly known as nylon. The monomer can be represented as H₂C=CH₂.

(ii)  Under suitable reaction conditions, the monomers undergo chain growth polymerization to form a long chain polymer with repeating units of -(CH₂-CH₂)-. The reaction kinetics for the two examples will be different due to the mechanism of polymerization. In step growth polymerization, the reaction occurs between two or more functional groups to form a polymer.

The reaction rate is slower and the molecular weight distribution is broader. On the other hand, in chain growth polymerization, the reaction occurs between monomers and an active site on a catalyst. This results in a faster reaction rate and a narrower molecular weight distribution.

To know more about the Polymer, here

https://brainly.com/question/29800357

#SPJ4