The angle of the ladder inclined with respect to the horizontal after being moved a distance of 0.82 m closer to the building is 53.84°
cos θ = Adjacent side / Hypotenuse
θ[tex]_{1}[/tex] = 47°
Hypotenuse = Length of ladder = 8.5 m
cos 47° = Adjacent side / 8.5
Adjacent side = Initial distance of base of ladder from the building = 5.8 m
Adjacent side 2 = Final distance of base of ladder from the building
Adjacent side 2 = 5.8 - 0.82 = 4.98 m
cos θ[tex]_{2}[/tex] = Adjacent side 2 / Hypotenuse
cos θ[tex]_{2}[/tex] = 4.98 / 8.5 = 0.59
θ[tex]_{2}[/tex] = [tex]cos^{-1}[/tex] ( 0.59 )
θ[tex]_{2}[/tex] = 53.84°
The formula used above is one of trigonometric ratios. Trigonometric ratios can used only in a right angled triangle where one of the angles in at 90 degrees and the other two angles are less than 90 degrees.
Therefore, the angle of the ladder inclined with respect to the horizontal after being moved is 53.84°
To know more about trigonometric ratios
https://brainly.com/question/1201366
#SPJ1
In school, Jarrett learned that salt lowers the freezing point of water. He wants to test this in a home experiment. He combines 1.0 grams of salt and 500 milliliters of water in a container. In an identical container, he pours 500 milliliters of water and does not add salt to it.
What should Jarrett do next?
A.
Place the salt water in a freezer and the pure water in a refrigerator.
B.
Mix the two samples of water together in a 1.0-liter container, and bring them to a boil on a stove.
C.
Place both containers in a freezer, and record the temperatures at which they begin to freeze.
D.
Place the pure water in a freezer and the salt water in a refrigerator.
Answer:
I think it's C but I'm not 100% sure
gina wants to find out if the temperature of water affects the solubility of a material. here are the variables in her experiment. she get three containers of equal size and labelled them A, B and C. then pour 50ml of hot water in container A, 50ml of lukewarm water in container B, and 50ml of cold water in container C, she then pour 1 teaspoon of salt in each container and stir it fo three minutes. then observes the result
The temperature of water affects the solubility of material the ability of a material, the solute, to combine with another substance, the solvent, is known as solubility in chemistry.
The contrary is appropriate for insoluble except in extremely rare circumstances, a solid or liquid cannot be "dissolved" in gas without first becoming gaseous composition of the solute and solvent, including their pH and the presence of other dissolved substances, as well as temperature and pressure, are the key determinants of solubility. The dependence is frequently explicable in terms of interactions between the atoms, molecules, or ions of the two substances as well as in terms of thermodynamic notions like enthalpy and entropy.
To learn more about solubility from the given link:
https://brainly.com/question/28170449
#SPJ9
in physics, a blank is a group of related objects that interact with eachother and form a complex whole
In physics, a system is a group of related objects that interact with each other and form a complex whole.
What is a system?In sciences (i.e., physics, chemistry and biology) a system can be defined as an interrelated group of different elements or parts that work together to perform a given function.
In conclusion, in physics and science disciplines in general, a group of related objects that interact in order to form a complex whole is commonly referred as a system.
Complete question:
Fill in the blank. In physics, a ____ is a group of related objects that interact with each other and form a complex whole.
Learn more about systems in science here:
https://brainly.com/question/15207423
#SPJ1
A 120 V power supply is used to power a TV. If the TV draws 0.25 A of current and the TV is used for 1.20 h, how much energy, in kilojoules, is used?
The amount of energy used by the TV is 129.6 kJ.
What is electric energy?Electric energy is the product of charge and potential difference.
To calculate the amount of electric energy used, we use the formula below.
Formula:
E = Vit................................. Equation 1Where:
E = Electric energyV = Voltagei = Currentt = timeFrom the question,
Given:
V = 120 Vi = 0.25 At = 1.2 h = (1.2×3600) = 4320 sSubstitute these values into equation 1
E = 120×0.25×4320E = 129600 JE = 129.6 kJHence, the amount of energy used by the TV is 129.6 kJ.
Learn more about electric energy here: https://brainly.com/question/13881533
#SPJ1
12. (a)
(i) What is meant by the term artificial radioactivity?
A pet store surveyed 625 people to see how many own a bird, how many own a dog, and how many own a cat.
The Venn diagram below shows the results. (Each number gives the number of people who fall into that Venn diagram category.)
All people in the survey-
Own a
bird
Own a
dog
115
103
49
138
61
33
34
Own a
cat
92
(a) How many of the people own exactly two of the three types of animals?
people
(b) How many of the people don't own a dog?
people
(c) How many of the people own neither a cat nor a bird, but do own a dog?
people.
The people who own all the three animals are 33 , (b) People who don't own a dog are 244 and (c) People who neither own a cat nor a bird but own a dog are 34 in number.
What is a Venn diagram?A Venn diagram is a representation of data in terms of figure. Where each circle represents a set of data, intersection of two or more circles shows that there is a common entity in both the sets.
What is a universal set in Venn diagram?A universal set contains all the possible elements. In Venn diagram a universal set is represented by a rectangle.
Given:
Total number of the people surveyed = 625
People who one a cat = 115
People who own a bird = 103
People who own a dog = 34
1) To find the number of people who own all the three animals we will have to find the intersection of C, B and D.
Where,
C represents set of cat
B represents set of bird
D represents set of dog
// Represents intersection
:: Represents union
From the given data
C//B//D = 33
i.e. people who own all the three animals = 33
2) People who don't own a dog.
Now carefully look at the given diagram you will notice:
34 own D only
138 own D and C
92 own D and B
33 own all the three
Now to find who doesn't own a dog we will find who owns a dog and then minus that from total people who owns animals.
Total people who own an animal= (115+103+34+138+61+92-2×33)
Total people who own an animal = 475
Now people who own a dog = 34+138+92-33
People who own a dog = 231
People who don't own a dog = 475-231
People who don't own a dog = 244
3) People who neither own a cat nor a bird but own a dog = 34
Therefore, the people who own all the three animals are 33 , People who don't own a dog are 244 and People who neither own a cat nor a bird but own a dog are 34 in number.
Learn more about Venn diagram here:
https://brainly.com/question/20795347
#SPJ9
I need help in this…
Diffraction is the spreading out of waves past small openings and the bending of waves around small obstructions.
What is diffraction ?Diffraction is the process by which light spreads out after passing through a small space or bends around an obstruction. Diffraction can occur in waves of any kind, including sound, radio, and water.
What is diffraction in sound wave?When an object has dimensions that are close to or smaller than the sound wave's wavelength, it causes a sound wave to move around it.
Waves spread out as they move through an aperture or around objects, which is known as diffraction. It happens when the aperture's or obstacle's size is of the same order of magnitude as the wave's wavelength. Nearly all of the wave is blocked at very small aperture sizes.
To know more about waves :
https://brainly.com/question/3639648
#SPJ9
A car initially has a velocity of 29 m/s starts to increase its velocity at a constant rate of 2.4 m/s2, for a distance of 22 m. What is its final velocity?
Answer:
vf=43.55m/s
Explanation:
Data:
vi=29m/s
S=22m
a=2.4 m/s^2
vf=? we are supposed to find final velocity.
we will use following equation of motion:
Formula:
[tex]2as=vf^{2} -vi^{2}[/tex]
put values
[tex]2(2.4)(22)=vf^2-(29)^2\\[/tex]
solving for [tex]vf^2[/tex].
taking [tex](29)^2[/tex] on the other side .
[tex]vf^2=2(2.4)(22)+(29)^2[/tex]
solve square first.
[tex]vf^2=2(24)(22)+841[/tex]
multiply the terms.
[tex]vf^2=1056+841[/tex]
add the terms
[tex]vf^2=1897[/tex]
taking square root on both sides.
[tex]\sqrt{vf^2}=\sqrt{1897}[/tex]
square root of [tex]vf^2[/tex] will be cancelled out .
[tex]vf=43.55m/s[/tex]
what is shielding effect due to hollow charged surface
Answer:
Electrostatic shielding
Explanation:
Positive and negative charges that are out of balance cause static electricity. One substance becomes positively charged and one becomes negatively charged when two dissimilar materials are rubbed together. Materials have been rated according on how well they can hold or release electrons. The triboelectric series is the name given to this order. These materials include paper, plastic, glass, hair, nylon, wool, and silk.
Electrons are merely transferred from one location to another when we charge anything with static electricity. There are no new or lost protons or electrons. The overall or net electric charge does not change. The "conservation of charge" principle refers to this.
An electric field is produced around charged items. The amount of charge, the distance involved, and the form of the items are just a few of the variables that affect how strong this field is. When dealing with huge items, this may get rather problematic. We may thus deal with "point sources" of charge to make things simpler. Point sources, also known as sources of insignificant dimensions, are charged objects that are much, much smaller than the space between them. The word "static" comes from the fact that an electric charge exists even when the electrons are not moving.
In the 1780s, French scientist Charles Coulomb (1736–1806) gave the first detailed account of electric field intensities. He discovered that the electrical force for point charges directly changes with the product of the charges. In other words, the field is stronger the higher the charges. Additionally, the field changes inversely with the square of the charge separation. This implies that the force weakens with increasing distance.
Because a significant charge may harm fragile electronic components like MOSFETs, CMOS ICs, Computer cards, TTL chips, and even LEDs, static electricity presents challenges for experimenters and electronics makers.
In a laboratory, there are a few fairly easy techniques to prevent static charges. The lab's air is made more humid, which reduces static electricity. Dry environments are better for electron accumulation. A thin coating of water molecules covers the majority of surfaces during humid days, allowing electrons to flow more easily and making nearly everything conductive and static-free. As a result, shocks are less frequent on these days.
Some factory employees must adhere to stringent dress codes, avoiding sweaters and headgear that can promote static. Technicians may wear wrist bands that deliver additional electrons into the earth by connecting them to the floor with a metal wire.
In factories, "air ionizers" are also used to regulate electron behavior. The devices release ions, or molecules with an excess of electrons, into a space. Ions are molecules with one or more missing electrons. The electrons find their opposites as they align with them as they drift around the room looking for equilibrium. Ionizers stop the accumulation of static electricity.
Sometimes we need a completely electrostatic-free environment for a piece of equipment to function extremely effectively, and the only definite way to achieve this is by creating a kind of enclosure that the equipment is designed to operate in. It could take up a whole room or perhaps just a metal box in a lab. A FARADAY'S CAGE is what it is called. It was created by British scientist Michael Faraday (1791–1867) and protects the contents from static electric forces.
The term comes from the fact that these enclosures resemble cages in many ways. Some are as straightforward as metal or chain-link enclosures. Some people employ a thin metallic mesh. No matter how they look exactly, all Faraday cages spread electrostatic charges or even specific forms of electromagnetic radiation around the cage's surface, keeping the interior free of them. (The metal mesh must contain holes that are shorter than the wavelength that is to be filtered in order to screen against electromagnetic radiation.) In essence, a Faraday cage is merely a "hollow conductor," with the charge only remaining on the cage's outside.
An airplane is the greatest illustration of a Faraday's Cage. Lightning frequently strikes airplanes when they are in the air. Despite the fact that it occurs frequently, neither the passengers nor the plane are harmed. This is so because the plane's metal body acts as a Faraday cage. Lightning strikes harmlessly over the surface of the airplane, causing no harm to the avionics, communications, or passenger electronics.
Thanks,
Eddie
A cheetah can accelerate from rest to a speed of 30m/s in 7.0s . What is its acceleration?
The acceleration of the cheetah is 4.29 m/s².
What is acceleration?Acceleration can be defined as the rate of change of velocity.
To calculate the acceleration of theb cheetah, we use the formula below.
Formula:
a = (v-u)/t........... Equation 1Where:
a = Acceleration of the cheetahv = Final velocity of the cheetahu = Initial velocity of the cheetaht = time.From the question,
Given:
v = 30 m/su = 0 m/s (from rest)t = 7.0 sSubstitute these values into equation 1
a = (30-0)/7a = 4.29 m/s²Hence, the acceleration of the cheetah is 4.29 m/s².
Learn more about acceleration here: https://brainly.com/question/605631
#SPJ1
A CT scan uses a rotating X-ray source mounted on a circular ring to capture three dimensional images of a body (see Figure
43.2 on page 521 of the textbook). One rotation of the X-ray source produces one sliced image of the body.
A specific CT scan machine has a circular ring with radius 44 cm (diameter 88 cm), and the mass of the X-ray source mounted
on the circular ring is 26 kg. The ring rotates at a constant rate of 21 rad/s. Answer the following questions.
(a) What is the tangential speed of the X-ray source in m/s?
(b) How many degrees does the X-ray source turn in 100 milliseconds?
(c) What is the magnitude of the centripetal force on the X-ray source?
(d) How many seconds does it take to take one image?
(e) What is the frequency of the rotation of the X-ray source in the unit of Hz?
Answer:
rsgc
Explanation:
bsf xg
A car going initially with a velocity 13.5 m/s accelerates at a rate of 1.9 m/s2 for 6.2 s. It then accelerates at a rate of minus2.5 m/s2 until it stops. What is the total time from the start of the first acceleration until the car is stopped? (Write your answer to two decimal places and do not write unit)
The total time from the start of the first acceleration until the car is stopped is 16.31 s
What is acceleration?This is defined as the rate of change of velocity which time. It is expressed as
a = (v – u) / t
Where
a is the acceleration v is the final velocity u is the initial velocity t is the time How to determine the final velocity in the first 6.2 s Initial velocity (u) = 13.5 m/sAcceleration (a) = 1.9 m/s²Time (t) = 6.2 s Final velocity (v) = ?a = (v – u) / t
1.9 = (v – 13.5) / 6.2
Cross multiply
v – 13.5 = 1.9 × 6.2
v – 13.5 = 11.78
Collect like terms
v = 11.78 + 13.5
v = 25.28 m/s
How to determine the time to stop the car Initial velocity (u) = 25.28 m/sFinal velocity (v) = 0 m/sAcceleration (a) = -2.5 m/s² Time (t) =?a = (v – u) / t
Thus,
t = (v – u) / a
t = (0 – 25.28) / –2.5
t = 10.112 s
How to determine the total timeTime for the the first acceleration = 6.2 sTime to stop the car = 10.112 sTotal time =?Total time = 6.2 + 10.112
Total time = 16.31 s
Learn more about acceleration:
https://brainly.com/question/491732
#SPJ1
There are numerous starting points that a composer could use when writing a piece of music.
A. True
B. False, dynamics and tempo are the only starting points
C. False, composers never us a starting point
D. False, structure is the only starting point
There are numerous starting points that a composer could use when writing a piece of music. True.
Composers write, direct, and create tunes for numerous genres. they will produce compositions, scores, and preparations for theatre, movies, television, and even video games. Composers have fantastic musical ears and frequently advocate for musicians.
A music style or subgenre may be described by using the musical techniques, the cultural context, and the content material and spirit of the themes. The geographical foundation is once in a while used to perceive a song style, even though a single geographical category will often encompass a wide style of subgenres.
Dynamics manner how quietly or loudly a bit of track ought to be performed. Dynamics are an essential way of conveying the mood of a bit and your use of dynamics is a marked detail of your performance. Composers use dynamics to trade the temper.
Learn more about music here:-https://brainly.com/question/26373912
#SPJ1
What are the internal resistance and voltage rating of a 420 Watt automatic washing machine that draws 1.75 Ampere?
The internal resistance of the washing machine is 137.14 Ω.
What is internal resistance?Internal resistance is the inherent resistance of a conductor.
To calculate the internal resistance of the washing machine, we use the formula below.
Formula:
P = I²R................... Equation 1Where:
P = Power of the washing machineI = CurrentR = Internal Resistance of the washing machine.Make R the subject of the equation
R = P/I²................ Equation 2From the question,
Given:
I = 420 WR = 1.75 ASubstitute the these values into equation 2
R = 420/1.75²R = 137.14 ΩHence, the internal resistance of the washing machine is 137.14 Ω.
Learn more about internal resistance here: https://brainly.com/question/20595977
#SPJ1
An electric field of 8.5x105 V/m is desired between two parallel
plates, each of area 45 cm7 and separated by 2.45mm of air. What
charge must be on each plate?
The charge that must be on each plate is 3.53 x 10⁻⁸ C.
Electric field between two parallel platesThe electric field between two parallel plates is given as;
C = εA/d
C = Q/V
V = Ed
C = Q/Ed
Q/Ed = εA/d
Q/E = εA
Q = εEA
where;
ε is permittivity of free spaceE is electric field strengthA is the area of the plateQ is the chargeQ = (8.85 x 10⁻¹² x 8.85 x 10⁵ x 45 x 10⁻⁴)
Q = 3.53 x 10⁻⁸ C
Thus, the charge that must be on each plate is 3.53 x 10⁻⁸ C.
Learn more about charges on parallel plates here: https://brainly.com/question/23735612
#SPJ1
A car crash gives out great force. These are reasons for the great force EXCEPT:
A- high car speed
B- a long time to stop
C huge car weight
D- huge deceleration
The students in Mrs. Mangione's class attempt to guess the number of marbles in a jar to earn 2 extra credit points on their next exam. Suppose there are 1206 marbles in a jar and a student makes a guess of m marbles. Which expression represents the difference between the student's guess and the actual number of marbles.
The formula m-1206 represents the discrepancy between the student's estimation and the actual number of marbles.
The student guesses that there are m marbles given that there are 1206 marbles in the jar.
The term that best captures the discrepancy between the student's guess and the actual number of marbles must be found.
Expressions are made up of a combination of numerical values, symbols, fractions, coefficients, and other elements that lack the equals sign.
There are 1206 marbles in total.
Guessed number of marbles by the student-m
The phrase that illustrates the distinction between a student's educated guess and
The expression that shows the difference between the student's guess and the actual number of marbles is m-1206.
Hence the expression which reflects the difference between the student's guess and the actual number of marbles is m-1206.
Learn more about Probability here:
https://brainly.com/question/25870256
#SPJ9
A student is running at her top speed of 5.5 m/s to catch a bus, which is stopped at the bus stop. When the student is still a distance 40.4 m from the bus, it starts to pull away, moving with a constant acceleration of 0.173 m/s^2.
(a) For how much time does the student have to run at 5.5 m/s before she overtakes the bus?
(b) For what distance does the student have to run at 5.5 m/s before she overtakes the bus?
(c) When she reaches the bus, how fast is the bus traveling?
(d) If the student's top speed is 2.70 m/s , will she catch the bus?
(a) The time taken before the student catches the bus is 11.52 seconds.
(b) The distance the student have to run before she overtakes the bus is 63.36 m.
(c) The speed of the bus is 2.0 m/s.
(d) If the student's top speed is 2.7 m/s he will still catch the bus, since the bus's speed is 2.0 m/s.
Time elapsed before the student over takes the busApply the principle of relative velocity as follows;
(Vs - Vb)t = D
where;
Vs is the velocity of the studentVb is the velocity of the bust is the time in which the student catches the busD is the distance between them(Vs - at)t = D
where;
a is the acceleration of the bus(5.5 - 0.173t)t = 40.4
5.5t - 0.173t² = 40.4
0.173t² - 5.5t + 40.4 = 0
solve the quadratic equation using formula method;
a = 0.173, b = -5.5, c = 40.4
t = 11.52 seconds or 20.27 seconds
so the minimum time taken by the student to over take the bus is 11.52 seconds
Distance the student have to run to overtake the busd = vt
d = 5.5 m/s x 11.52 s = 63.36 m
Speed of the busv = at²
v = 0.173 x (11.52)
v = 2.0 m/s
If the student's top speed is 2.7 m/s he will still catch the bus, since the bus's speed is 2.0 m/s.
Learn more about speed of bus here: https://brainly.com/question/647176
#SPJ1
A student performed a sphere drop experiment. The sphere was dropped from 1.50 m above the ground and the sphere has
a mass of 0.875 kg. Free fall times for the student's experiments are below.
a. Before the student calculates the acceleration due to gravity from the data, are there any trials that should be thrown
out? Justify your choice.
The experimental value of the expression due to gravity through the experiment will come out to be 7.8 u, the error in the value has Accord because of air friction.
What is Newton's law of motion?Newton gave three laws of motion which can be utilised to find the velocity, acceleration and displacement of a body. These laws are only applicable for constant acceleration.
What is free fall?When a body falls freely under only the force of gravitation due to the earth and no other force act on the body is known as free fall.
Given:
Mass of the sphere is 0.875 kg
Height of the free fall is 1.5 metre
Experiments are conducted in the following manner:
First the bob will be released and from the point that it is being released we will measure the distance using the inch tape we will also calculate the time it takes for the bob to hit the ground.Using the speedometer will measure the final velocity before it is the ground.Now using Newton's first law of motion we can derive the acceleration due to gravity we know the final velocity using the speedometer the distance it has covered and the time it has taken to complete that distance.Using Newton's first law of motion
i.e. v = u + a × t
Where,
u is initial velocity
v is final velocity
a is acceleration due to gravity
t is time taken to cover distance
From the data given v = 15.6 m/s
t is 2 seconds
Substituting value in Newton's first law of motion we get
Value of acceleration due to the gravity = 7.8u
Therefore, The experimental value of the expression due to gravity through the experiment will come out to be 7.8 u , the error in the value has Accord because of air friction.
Learn more about Newton's law of motion here:
https://brainly.com/question/974124
#SPJ1
How many liters are in 10 U.S. gallons?
1 gallon
3.79 liters
OR
3.79 liters
1 gallon
Answer:
37.85 Liters in 10 US gallons
Explanation:
if asking for volume: volume = 3.785liters
You make a capacitor by cutting the 14.5-cm-diameter bottoms out of two aluminum pie plates, separating them by 3.35 mm , and connecting them across a 6.00 V battery.
If you disconnect the battery and separate the plates to a distance of 3.50 cm without discharging them, what will be the potential difference between them?
Express your answer to three significant figures with the appropriate units.
From the definition of capacitance, the potential difference between them will be 6.24v
What is Capacitance of a capacitor ?The capacitance of a capacitor is the ratio of charge to the voltage supplied. It is measure in Farad.
If you make a capacitor by cutting the 14.5-cm-diameter bottoms out of two aluminum pie plates, separating them by 3.35 mm , and connecting them across a 6.00 V battery, the cross sectional A = πr²
where r = 14.5/2 = 7.25 cm
r = 7.25/100 = 0.0725 m
The distance d = 3.35 mm = 3.35/1000 = 0.00335 m
A = πr²
A = 22/7 × 0.0725²
A = 0.0165 m²
Capacitance is proportional to the area of the plate and inversely proportional distance between them. That is,
C = ξA/d
where ξ = 8.5 × 10^-12 C²/Nm²
C = (8.5 × 10^-12 × 0.0165) / 0.00335
C = 4.19 × 10^-11 F
From Charge Q = CV
Q = 4.19 × 10^-11 × 6
Q = 2.5 × 10^-10 C
If you disconnect the battery and separate the plates to a distance of 3.50 cm without discharging them, the capacitance will be
C = ξA/d
C = (8.5 × 10^-12 × 0.0165) / 0.0035
C = 4.007 × 10^-11
From Q = CV
V = Q/C
V = 2.5 × 10^-10 / 4.007 × 10^-11
V = 6.24 v
Therefore, the potential difference between them will be 6.24v
Learn more about Capacitor here: https://brainly.com/question/21851402
#SPJ1
A police radar's effective range is 0.90 km , and your radar detector's range is 1.9 km . You're going 110 km/h in a 70 km/h zone when the radar detector beeps. At what rate must you negatively accelerate to avoid a speeding ticket?
Negative acceleration of 0.2 m/s^2 is needed to avoid a speeding ticket.
Negative acceleration occurs when a force causes a body's velocity to decrease. Positive acceleration occurs when the speed of something rises.
The acceleration of a slowing object is in the direction opposite from the velocity. As a result, this item is said to have negative acceleration.
Given:
Initial velocity, u = 110km/h
Final velocity, v = 70km/h
Police radar's effective range, S1 = 0.90km
Radar detector's range, S2 = 1.9km
To find:
Negative acceleration, a = ?
Formula:
v^2 = u^2 + 2aS
Calculation:
a = (v^2 – u^2) / 2(S1 - S2)
a = 70^2 – 110^2/ 2 x (0.9 – 1.9)
a = [(4900 – 12100) / (2 x -1)] / 3600^2
a = 0.2 m/s^2
Result:
0.2m/s^2 negative acceleration is required to avoid a speeding ticket.
Learn more about Negative acceleration here:
https://brainly.com/question/12015984
#SPJ9
Claudia is performing an experiment, testing to see if decreasing the temperature in which pea plants are growing makes them flower sooner. In this experiment, what are some values that Claudia will want to hold constant. (Choose all that apply)
a.which day the plants begin to flower
b.the amount of light the plants get
c.the temperature the plants are grown in
d.the type and amount of fertilizer used
e.the amount of water the plants get
Claudia is performing an experiment, testing to see if decreasing the temperature in which pea plants are growing makes them flower sooner which means that some values that Claudia will want to hold constant include the following below:
b.the amount of light the plants get.
d.the type and amount of fertilizer used.
e.the amount of water the plants get.
What is an Experiment?This refers to a procedure which is carried out by scientists in other to support or refute a hypothesis and is usually done in the laboratory. It is also used to ascertain the authenticity of a claim and consists of two types of variables which are constant and control variables.
The constant variables doesn't change and is applied uniformly to all the specimens. In this scenario they include the amount of light, fertilizer and water the plants gets.
Controlled variables are the ones which are changed and its varied application on different specimens are used to measure the effect and in this case an example is the temperature the plants are grown in because the test involves this parameter.
Read more about Experiments here https://brainly.com/question/17274244
#SPJ1
an extension cord 20m long uses no. 12 gauge copper wire (cross section area 0.033 cm ^2 resistivity 1.7×10^-8 ohms - m
If an extension cord 20 m long uses no. 12 gauge copper wire cross-section of area 0.033 cm² resistivity 1.7×10⁻⁸ ohms - m, the resistance of the extension chord would be 0.1030 Ohm.
What is resistance?Resistance is the obstruction of electrons in an electrically conducting material.
The mathematical relation for variation in resistance with length is given by
R = ρ*L/A
As given in the problem an extension cord 20 m long uses no. 12 gauge copper wire cross-section of area 0.033 cm² resistivity 1.7×10⁻⁸ ohms - m, then we have to find the resistance of the wire,
Resistance of the wire = 1.7×10⁻⁸ ×20/0.033 ×10⁻⁴
=0.1030 Ohm
Thus, the resistance of the extension chord would be 0.1030 Ohm.
Learn more about resistance, here, refer to the link;
brainly.com/question/14547003
#SPJ1
The question is incomplete the complete question is,
An extension cord 20 m long uses no. 12 gauge copper wire cross-section of area 0.033 cm² resistivity 1.7×10⁻⁸ ohms - m, then find the resistance of the wire?
Galileo carried out his seminal free-fall experiment using an inclined plane. Why is such an approach feasible, and some-
times preferable to the simple drop method, for determining g?
For determining g (gravity), seminal free-fall experiment using inclined plane is preferable to the simple drop method because in simple drop method there is resistance caused by air on the falling object whereas on the seminal free-fall method using inclined plane air resistance has little to no effect.
Galileo was an Italian scientist who combined theory with experiment. He was very much interested in understanding the movement and falling of objects.
Objects when falling down would accelerate quickly i.e., let’s take an object falling at the speed of x, after time t it would travel at 2x, after 2t it would be 4x. Therefore, it is difficult to time with accuracy. Thus, inclined plane would help to dilute the effects of gravitational force and reduce the time.
To know more about gravitational force
https://brainly.com/question/10405569
#SPJ1
Questions:
1. Clara drives 250 km West to play a gig in Colombia City. After the gig he drives 450 km
east to jam with some musicians in Columbia. What distance did he cover? What was his
displacement?
Answer:
700km
Explanation:
going was 250km and leaving was 450
250+450=700
please help:((( If you run 60 m in 7 seconds, then run 25 m in 4 seconds, what is your average speed for the entire run?
Answer:22m
Explanation:
Which term is defined as a guess informed by observations?
O theory
O law
O principle
O hypothesis
Hi !
Answer:
Which term is defined as a guess informed by observations?
O hypothesis
A vector has an x component of -25.5 units and a y component of 36.6 units. Find the magnitude and direction of this vector.
the magnitude and direction of this vector is cos −1√ (−5/ 89)
Magnitude is simply "distance or quantity" in the context of physics. In terms of motion, it shows the absolute or relative size, direction, or movement of an object. It is used to describe something's size or scope. Magnitude in physics typically refers to a size or quantity.
A constant quantity's magnitude is a numerical value for the quantity expressed in terms of a unit of measurement. For instance, the real number 2000 is the magnitude of the quantity 2 kilometers in the unit-of-measure meter.
Magnitude = (25) 2 + (40) 2 =5√89
Angle with the x-axis equals tan√ 1(y/x).
=tan −1 √ (40/−25)
=tan −1√ (−8/5)
=cos −1√ (−5/ 5 √2+6/2)
=cos −1√ (−5/ 89)
Learn more about magnitude here-
https://brainly.com/question/15681399
#SPJ9
At t = 0 a truck starts from rest at x = 0 and speeds up in the positive x -direction on a straight road with acceleration aT . At the same time, t = 0, a car is at x = 0 and traveling in the positive x -direction with speed vC . The car has a constant negative x -acceleration: acar−x=−aC , where aC is a positive quantity.
1.) At what time does the truck pass the car?
Express your answer in terms of the variables vC , aC , and aT .
t=
2.) At what coordinate does the truck pass the car?
Express your answer in terms of the variables vC , aC , and aT .
x =
1. The truck overtakes the car at time t = 2vC/(aT - aC)
2. The coordinate where the truck passes the car is x = 2aT[vC/(aT - aC)]²
The question has to do with equation of motion
What are the equations of motion?The equations of motion are equations that are used to describe the motion of an object under constant acceleration.
1.) At what time does the truck pass the car?
Since at t = 0 a truck starts from rest at x = 0 and speeds up in the positive x -direction on a straight road with acceleration aT.
We find the distance moved by the truck using the equation of motion d = ut + 1/2at² where
u = initial speed of truck = 0 m/s(since it starts at rest) a = acceleration of truck = aTSo, d = ut + 1/2at²
d = 0 × t + 1/2aTt²
d = 1/2aTt²
Also, at the same time, t = 0, a car is at x = 0 and traveling in the positive x -direction with speed vC . The car has a constant negative x -acceleration: acar−x=−aC , where aC is a positive quantity.
We find the distance moved by the car using the equation of motion D = ut + 1/2at² where
u = initial speed of car = vC a = acceleration of car = -aCSo, D = ut + 1/2at²
D = vCt + 1/2(-aC)t²
D = vCt - 1/2aCt²
The truck over takes the car when d = D
So, 1/2aTt² = vCt - 1/2aCt²
1/2aTt² - 1/2aCt² - vCt = 0
[(aT - aC)t/2 - vC)]t = 0
⇒ t = 0 or (aT - aC)t/2 - vC = 0
⇒ t = 0 or (aT - aC)t/2 = vC
⇒ t = 0 or t = 2vC/(aT - aC)
So, the truck overtakes the car at time t = 2vC/(aT - aC)
2.) At what coordinate does the truck pass the car?Since the distance moved by the truck is d = x - 0
= 1/2aTt², where x = coordinate where truck passes car.
To find the coordinate where the truck passes the car, we susbstitute the time where the truck passes the car into d. So, t = 2vC/(aT - aC)
So, x - 0 = 1/2aTt²
x = 1/2aT[2vC/(aT - aC)]²
x = 2aT[vC/(aT - aC)]²
So, the coordinate where the truck passes the car is x = 2aT[vC/(aT - aC)]²
Learn more about equations of motion here:
https://brainly.com/question/27899272
#SPJ1
