Answer:
standard carbon atom
Explanation:
Answer:
Explanation:
This is an isotope of carbon, more specifically, carbon-14. Carbon 14 has 6 protons, making the element carbon, and eight neutrons since 14-6 = 8.
The material used as a biological sensor is one dimension of 20 mm, the other Are in nanometers
Answer: 20 , 40
I want know the answer now !
Question 12 of 35
Which two specialized structures allow amphibians to live on land?
O A. Gills
B. Lungs
C. Legs
D. Tail
SUBMIETI
Answer:
B and C
Explanation:
Most animals that live underwater have have gills and tails and vise versa hope this helps!
koukladina stop deleting my answers I'm trying to help people I'm not doing anything wrong stop it
Choose all the answers that apply.
What’s is the freezing point of water?
1. 0’c
2.32’c
3.32’F
4.0’F
Answer: The answers are the first and third options.
Answer:
1.0'c
3.32'f
Explanation:
A student pours ammonium nitrate into a container of room temperature water. The student stirs the mixture with a stirring rod and then feels the outside of the container, which is cold to the touch. Which material is part of the system that absorbed heat?
the water
the air
the stirring rod
the container
The material that absorbs the heat of the system is water owing to its high specific heat capacity.
The specific heat capacity of a substance refers to the amount of heat that is capable of increasing the temperature of 1 Kg of a body by 1 K. The higher the specific heat capacity, the more the amount of heat that the body can absorb without temperature change.
The material that absorbs the heat of the system is water because water has a higher specific heat capacity than all the other materials present.
Learn more about specific heat capacity: https://brainly.com/question/2530523
The material which is part of the system that absorbed heat is; The water.
Discussion:
According to the question;
Water was initially at room temperature.We know by convention, ammonium nitrate is a cold substance.In essence, the heat liberated from the system must have been absorbed by the water so that the outside of the container after mixing becomes cold.
This is so because water has a high specific heat capacity.
Read more on heat capacity:
https://brainly.com/question/16559442
Calculate the molar mass of NH4NO3. Molar mass of NH4NO3 = g/mol.
The molar mass of NH4NO3 in g/mol is 80g/mol.
HOW TO CALCULATE MOLAR MASS:
The molar mass of a compound can be calculated by summing the atomic masses of its constituent elements.
In ammonium nitrate (NH4NO3), there are nitrogen, hydrogen, and oxygen elements.
Atomic mass of nitrogen = 14Atomic mass of oxygen = 16Atomic mass of hydrogen = 1Molar mass of NH4NO3 = 14 + 1(4) + 14 + 16(3)
Molar mass of NH4NO3 = 80g/mol
Therefore, the molar mass of NH4NO3 in g/mol is 80g/mol.Learn more about molar mass at: https://brainly.com/question/8101390?referrer=searchResults
Answer:
80g/mol
Explanation:
edge 2022
[EARTH SCIENCE]
Hi, can anyone help please? Thank uuuu!!! :D
The relationship between the average distance of a planet from the sun and the planet’s orbital period is described by the....
A. Law of ellipses.
B. Law of equal areas.
C. Law of motion.
D. Law of periods.
Answer:
c. law of motion
Explanation:
I think I hope it helps
Deval drew the models of particles in a substance shown below. Which model best represents the particles in solid
Answer:
it would be the second one thank me later
Explanation:
calculate the mass of sodium sample that it contains 2 Na atoms of sodium
please i need help with this ques.
Answer:
45.98 I believe if its wrong im sorry
Please read question
Answer:
cant see it
Explanation:
What did you observe about the properties of the sodium carbonate mixture before the substances were mixed together?
Answer:
Would you consider adding a sodium carbonate solution to a magnesium sulfate .
Explanation:
??
What is the amplitude of the above wave?
Answer:Amplitude in a longitudinal wave
Explanation:Wave amplitude of a longitudinal wave is the distance between particles of the medium where it is compressed by the wave. Wave amplitude is determined by the energy of the disturbance that causes the wave. A wave caused by a disturbance with more energy has greater amplitude.
explain the concept of kenetic molecular theory
Find the density of an 8 gram rock if the water in a graduated cylinder rises from 25.0 mL to
29.0 mL when the rock is placed in to the graduated cylinder.
To measure the density of the stone placed in a graduated cylinder let us follow these steps bellow
Measure the volume of water poured into a graduated cylinderPlace the object in the water and remeasure the volume. The difference between the two volume measurements is the volume of the object. Divide the mass by the volume to calculate the density of the object.We know that the formula for density is given as
Given data
Mass = 8gram
Initial Volume of water in cylinder = 25mL
Final Volume of water in cylinder = 29mL
Hence the volume of the rock = 29-25 = 4mL
Therefore the density of the rock = 8/4 = 2 g/mL
Learn more:
https://brainly.com/question/17336041
(cwater=4.18 J/g°C)
A
1,254 J
B
1,672 J
C
2,926 J
D
4,598 J
Answer:
WHAAAAAAAAAAAAAAAAAAAAT
Explanation:
Round off your answer to one decimal place.
Answer: 10.4
Explanation:
ph is just as follows:
[tex]pH = -log[H_{3}O^{+}][/tex]
So plugging in our concentration we get:
[tex]-log(4.45*10^{-11})=10.35163999...[/tex]
Then rounding to one decimal place takes us to pH = 10.4
Sodium has a density of 1.95 g/mL If the volume of some sodium is 9.0 L what is the mass
Answer:
17550g
Explanation:
You want to use the equation D=M/V. You are given density in g/mL, so you just need to multiply that by 9L, but first you want the mL and L to match, so you change the 9L to 9000mL (knowing there is 1000mL in 1L). Then solve algebraically by multiplying the 9000mL and the 1.95g/ml, making the mL cancel, leaving you with your answer in grams.
Hope this helps!
what is meant by the term symbol of an element?
An element symbol is a one- or two-letter abbreviation for a chemical element name. When a symbol consists of two letters, the first letter is always capitalized, while the second letter is lowercase. Element symbols also can refer to alchemy symbols for the elements or to the symbols used to describe isotopes.
Study hard!
BRAINLIEST TO BEST ANSWER AND 40 POINTS GRAB QUICK
Why are sodium (Na) and potassium (K) in the same group on the periodic table?
Answer:
They both have 1 valence electron
Explanation:
determine the bond type (NP, Polar, Ionic)
Answer:
a. NP
b. NP
c. Polar
d. Ionic
e. Polar
Explanation:
The way I did it was using the electronegativity of the elements mentioned and subtracted the pairs. For non polar the difference is 0-0.4, for polar it’s 0.4-2.0, for ionic it’s >2.0. I included the chart I used to find the electonegativity for the elements below.
B: 2.04, P: 2.19, difference is 0.15, so NP
Be: 1.57, Si: 1.9, difference is 0.33, so NP
C: 2.55, Na: 0.93, difference is 1.62, so Polar
Li: 0.98, O: 3.44, difference is 2.46, so Ionic
Mg: 1.31, N: 3.04, difference is 1.73, so Polar
If you really want I can explain why electronegativity affects the types of bonds, just comment below
Answer:
Polar is the correct answer
Explanation:
#CarryOnLearning
Calculate the mass of nitric acid required to make a 250mL solution with 2.40 ph
Please show steps, I am trying to learn!
The mass of nitric acid required to make the given solution is 0.0627 g.
The given parameters:
Volume of the acid, V = 250 mLpH of the acid, = 2.4The hydrogen ion (H⁺) concentration of the nitric acid is calculated as follows;
[tex]H^+ = 10^{-pH}\\\\H^+ = 10^{-2.4}\\\\H^+ = 0.00398[/tex]
The molarity of the nitric acid is calculated as follows;
[tex]= 0.00398 \ H^+ \times \frac{1 \ M \ HNO_3}{1 \ H^+} \\\\= 0.00398 \ M[/tex]
The number of moles of the nitric acid is calculated as follows;
[tex]moles = M\times L\\\\moles = 0.00398\ M \ \times \ \frac{250 \ mL}{1000} \\\\moles = 9.95 \times 10^{-4} \ mol.[/tex]
The molar mass of nitric acid is calculated as;
[tex]HNO_3 = (1) \ + (14) \ + (16 \times 3) = 63 \ g/mol[/tex]
The mass of the nitric acid contained in the calculated number of moles is calculated as;
[tex]mass = moles\ \times \ molar \ mass\\\\mass = 9.95\times 10^{-4} \ mol. \ \times \ 63 \ g/mol\\\\mass = 0.0627 \ g[/tex]
Thus, the mass of nitric acid required to make the given solution is 0.0627 g.
Learn more about molarity of acids here: https://brainly.com/question/13864682
what is the oxidation number of sulfur in the sulfate ion?
Answer:
+6
Explanation:
which aqueous solution has the lowest vapor pressure?
Answer:
Since all of them are aqueous solutions, the solvent in each solution is H2O. Based on the Raoult's Law, we only have to determine which solution contains the highest mole fraction of the solvent, H2O. The solution that will have the lowest vapor pressure is a. 0.20 m Na2SO4.
Explanation:
plz give brainliest
When drawing an atom, we draw the same number of electrons as
protons
Select one:
True
False
Answer:
true
I hope it helps.
discuss why people use the scientific method
Answer:
They use the scientific method to study different aspects of how people think and behave. They also use the scientific method because it is evidence-based, standardized and objective in conducting experiments.
Which of the following are needed for an electrical circuit? Choose all that apply
A.A mental conductor for electrons to pass through
B.light bulb
C.two negative ends to a battery
D.closed loop
E.charged battery to provide an electrical difference
Answer:
E\charged battery to provide electronic difference
does Waves move in a circular motion.
True or false
why yes
Waves are created by energy passing through water, causing it to move in a circular motion
Which statement about states of matter is correct? (1 point)
O If you add enough heat to a gas, it will change into a liquid
If you cool a solid enough, it will change into a liquid
If you add enough heat to a solid it will change into a liquid.
o If you cool a liquid enough, it will change into a gas
Answer:
C
Explanation:
If you add enough heat to a solid it eventually becomes a liquid
which colour would you expect ekasilicon to be
Answer:
it would ether be gray to black or silver to gray and black
Explanation:
because of my calculation ekasillicon would be that color because of the eyes and because of your color seeing .
A little help here please
Answer:
Prokaryotic Cells:
- Bacteria
- Unicellular Organisms
- DNA as genetic material
- Ribosomes
- Do not have membrane bound organelles
- Always contain cell wall
Eukaryotic Cells:
- Contains organelles
- Have membrane bound organelles
- Unicellular Organism
- DNA as genetic material
- Ribosomes
- Have loose strand of DNA
- Has nucleus
- Multicellular Organism
- Plant cell
- Animal cell
Explanation:
I have separated them and made the common characteristics in bold. I cannot guarantee that it is correct, these are my educated estimates.
Name one nutrient indicator and explain how it works.
Answer:
Hi this is Adhira please make me as brainlist
Explanation:
The nutritional status indicators for the CDC Growth Charts include obesity, overweight, underweight, and short stature. Percentiles are used to rank an individual or a group on a growth chart and indicate where either fits in the context of the reference population
