An eccentricity of 0 produces
a circular orbit
straight line motion
a parabolic orbit
an orbit with eccentricity like the Earth's orbit
According to Newton's Law of Gravitation the force between two objects is F =G(M 1M 2)/r 2 where G is the gravitational constant, M 1 and M 2 are the masses of two objects and r is the distance between the two objects. If you were to move the two objects twice as far apart as they originally were, what would happen to the force between them?
it would be 2 times as much
it would be 4 times as much
it would be 1/2 as much
It would be 1/4 as much
Finding patterns that link two quantities is
interesting but doesn't prove there is a causal link between the quantities
a sure sign that one causes another
always pure coincidence
there is no way to know whether there is a causal relationship or not
The average distance of a planet from the sun is the same as
semi-major axis
radius vector
perihelion distance
aphelion distance

Answers

Answer 1

The force between the two objects would be 1/4 as much if you moved them twice as far away. According to Newton's Law of Gravitation, the force between two objects is inversely proportional to the square of their distance. Double the distance reduces force by 1/4.

An orbit with zero eccentricity is circular. The orbit is circular when the eccentricity is 0, therefore the distance between the two objects stays constant. If you moved the two items twice as far apart, Newton's Law of Gravitation says the force between them would be 1/4 as large. The square of the distance between objects is inversely proportional to the force. The force is 1/4 of its initial value when the distance is doubled.

Patterns linking two quantities are intriguing, but they don't indicate a causal relationship. A cause-and-effect relationship cannot be established by correlation or patterns alone. Further inquiry and proof are needed to determine if the quantities are causally related. A planet's semi-major axis is its average distance from the Sun. The average distance between the planet and the Sun during its elliptical orbit is it.

To know more about Newton's Law

https://brainly.com/question/10454047

#SPJ4


Related Questions

the 50-turn loop of wire shown in the figure lies in a horizontal plane, parallel to a uniform horizontal magnetic field, and carries a 2.0 a current. the loop is free to rotate about a nonmagnetic axle through the center. a 150 g mass hangs from one edge of the loop. what magnetic field strength will prevent the loop from rotating about the axle?

Answers

The 50-turn loop of wire lies in a horizontal plane, parallel to a uniform horizontal magnetic field, and carries a 2.0 a current. the loop is free to rotate about a nonmagnetic axle through the center. A 150 g mass hangs from one edge of the loop. The magnetic field strength will prevent the loop from rotating about the axle is 0.0735 Tesla.

To prevent the loop from rotating about the axle, the torque caused by the magnetic field on the current-carrying loop must be equal and opposite to the torque caused by the hanging mass.

The torque exerted by the magnetic field on the loop can be calculated using the formula:

[tex]Torque_m[/tex] = N * I * A * B * sin(θ)

where:

N = number of turns of wire (50 turns in this case)

I = current flowing through the wire (2.0 A)

A = area of the loop (assuming it is a square loop, A = side²)

B = magnetic field strength

θ = angle between the magnetic field and the plane of the loop (90 degrees in this case, as the loop is parallel to the magnetic field)

The torque exerted by the hanging mass can be calculated as:

[tex]Torque_g[/tex] = m * g * d

m = mass of the hanging mass (150 g converted to kg, m = 0.150 kg)

g = acceleration due to gravity (9.8 m/s²)

d = distance from the center of the loop to the point where the mass is hanging (assuming the side length of the loop is "a," d = a/2)

To prevent the loop from rotating, the two torques must be equal, so we can set them equal to each other:

N * I * A * B * sin(θ) = m * g * d

Now, let's plug in the known values and solve for B:

50 * 2.0 * a² * B * sin(90°) = 0.150 * 9.8 * (a/2)

100 * a² * B = 0.150 * 9.8 * (a/2)

B = (0.150 * 9.8) / (2 * 100) = 0.0735 T

So, the magnetic field strength required to prevent the loop from rotating about the axle is approximately 0.0735 Tesla.

To know more about magnetic field here

https://brainly.com/question/14848188

#SPJ4

a projectile of 1.32 kg mass approaches a stationary body of 5.30kg at 12.5 m/s and, after colliding, rebounds in the inverse direction along the same line with a speed of 5 m/s. what is the speed of the 5.30kg body after the collision? g

Answers

The speed of the 5.30 kg body after the collision is approximately 4.358 m/s.

To solve this problem, we can apply the principle of conservation of momentum. The total momentum before the collision should be equal to the total momentum after the collision.

Let's denote the initial velocity of the 5.30 kg body as v2 and the final velocity as v2f. The initial velocity of the 1.32 kg projectile is 12.5 m/s, and its final velocity is -5 m/s (opposite direction).

Before the collision:

Total momentum = m1 * v1 + m2 * v2

= (1.32 kg) * (12.5 m/s) + (5.30 kg) * (0 m/s) (since the 5.30 kg body is stationary initially)

After the collision:

Total momentum = m1 * v1f + m2 * v2f

= (1.32 kg) * (-5 m/s) + (5.30 kg) * v2f

Since momentum is conserved, the total momentum before the collision should be equal to the total momentum after the collision:

(1.32 kg) * (12.5 m/s) + (5.30 kg) * (0 m/s) = (1.32 kg) * (-5 m/s) + (5.30 kg) * v2f

Solving for v2f:

(1.32 kg) * (12.5 m/s) = (1.32 kg) * (-5 m/s) + (5.30 kg) * v2f

16.5 kg·m/s = -6.6 kg·m/s + (5.30 kg) * v2f

23.1 kg·m/s = (5.30 kg) * v2f

Dividing both sides by 5.30 kg:

v2f = 23.1 kg·m/s / 5.30 kg

v2f ≈ 4.358 m/s

Therefore, the speed of the 5.30 kg body after the collision is approximately 4.358 m/s.

To know more about speed here

https://brainly.com/question/32673092

#SPJ4

For the circuit shown with a 12.0 V battery, what are the currents through each resistor and the voltage drops across each resistor?

Answers

Explanation:

Find the EQUIVALENT resistance of the parallel R2, R3 and R4  :

1/ ( 1/50 + 1/30 + 1/60) = 14.29 Ω

Now find the current through the series circuit of 75  and 14.29 ohms :

  V/R = I     12 V / ( 75 + 14.29) Ω  = .1344 A

Now the voltage drop across R1 is :   I * R = .1344 ( 75) = 10.08 v

   the remaining  1.92 v is applied (and dropped ) across each of the other R2, 3 and 4 resistors

     current R2 is     V / R2 = 1.92/50 = .0384 A

     R 3 current is    V / R3 = 1.92/30 = .064 A

      R 4 current is   V / R4 = .032 A

Capella, the brightest star in Auriga has a luminosity 180 bigger than the Sun and a surface temperature of 6500K. The apparent visual magnitude of Capella is m=0.08 and the absolute magnitude is M= -0.48. Calculate how big is Capella's radius in comparison with our Sun. Sun temperature is 5800K

Answers

The radius of Capella is 1.9 times bigger than the radius of the Sun.

Using the formula:

L = 4πR²σT⁴

Where L is the luminosity, R is the radius, σ is the Stefan-Boltzmann constant, and T is the temperature.

The values for the Sun as L(sun), R(sun), and T(sun), and the values for Capella as L(Capella), R(Capella), and T(Capella).

(L(capella) = 180 × L(sun))

The temperature of Capella is 6500 K,

180 × L(sun) = 4πR(capella)²σT(capella)⁴

L(sun) = 4πR(sun)²σT(sun)⁴

180 × L(sun) = 4πR(capella)²σT(capella)⁴

R(capella)² = 180 × L(sun) / (4πσT(capella)⁴)

R(capella) = √180 × L(sun) / (4πσT(capella)⁴)

(R(capella)/ R(sun) = (√180 × L(sun) / (4πσT(capella)⁴)) / R(sun)

(R(capella)/ R(sun) = 1.9

Therefore, the radius of Capella is 1.9 times bigger than the radius of the Sun.

To know more about the radius of the sun:

https://brainly.com/question/14651623

#SPJ4

A long shunt compound motor draws 6.X kW from a 240-V supply while running at a speed of 18Y rad/sec. Consider the rotational losses = 200 Watts, armature resistance = 0.3X , series field resistance = 0.2 2 and shunt resistance = 120 9. Determine: a. The shaft torque (5 marks) (5 marks) b. Developed Power c. Efficiency (5 marks) d. Draw the circuit diagram and label it as per the provided parameters

Answers

a. The shaft torque cannot be determined without specific values for X and Y.

b. Developed Power = 6.X * 1000 - 200 (in watts).

c. Efficiency = (Developed Power / Power) * 100% (in percentage).

a. The shaft torque, we can use the following formula:

Torque = (Power - Rotational losses) / Speed

Given:

Power = 6.X kW (in kilowatts)

Rotational losses = 200 Watts

Speed = 18Y rad/sec (in radians per second)

Substituting the given values, we have:

Torque = (6.X * 1000 - 200) / (18Y)

b. The developed power can be calculated using the formula:

Developed Power = Power - Rotational losses

Given:

Power = 6.X kW (in kilowatts)

Rotational losses = 200 Watts

Substituting the given values, we have:

Developed Power = 6.X * 1000 - 200

c. Efficiency can be calculated using the formula:

Efficiency = (Developed Power / Power) * 100%

Given:

Power = 6.X kW (in kilowatts)

Developed Power = 6.X * 1000 - 200

Substituting the given values, we have:

Efficiency = (Developed Power / Power) * 100%

d. I apologize, but as a text-based AI, I cannot draw a circuit diagram. However, I can provide you with a verbal description of the circuit diagram:

The circuit diagram for the long shunt compound motor will consist of the following elements:

- A voltage source labeled as "240V"

- A long shunt field winding, connected in parallel to the armature

- The armature, with its resistance labeled as "0.3X2"

- The series field winding, with its resistance labeled as "0.22"

- The shunt field winding, with its resistance labeled as "1202"

- The load connected to the motor

- The rotational losses labeled as "200W"

Please note that the actual connections and placements of these elements in the circuit diagram depend on the specific motor configuration and wiring.

To know more about shaft torque refer here

https://brainly.com/question/3067448#

#SPJ11

Find parametric equations and symmetric equations of the line that passes through the point (5,1,3) and is parallel to the vector f

=⟨1,4,−2⟩

Answers

The line is parallel to vector `f=⟨1,4,−2⟩`and passes through the point `(5,1,3)`; hence, the vector direction of the line is `f=⟨1,4,−2⟩`. Parameteric Equations of the line:We take the coordinates of the point as `x₀=5, y₀=1, and z₀=3` as the initial point, and the vector `f=⟨1,4,−2⟩` as the direction vector of the line.

The parametric equations of the line are as follows:`

x = x₀ + fxt = 5 + t` `y = y₀ + fyt = 1 + 4t` `z = z₀ + fzt = 3 - 2t`

Symmetric Equations of the line:The symmetric equations of a line are given by:`(x - x₀) / f_x = (y - y₀) / f_y = (z - z₀) / f_z`The symmetric equations of the line that passes through the point `(5,1,3)` and is parallel to the vector `f =⟨1,4,−2⟩` are:`(x - 5)/1 = (y - 1)/4 = (z - 3)/(-2)` The parametric equations of the line are:`x = 5 + t``y = 1 + 4t``z = 3 - 2t`And the symmetric equations of the line are:`(x - 5)/1 = (y - 1)/4 = (z - 3)/(-2)`.

To know more about Parameteric Equations visit:-

https://brainly.com/question/14762616

#SPJ11

The stator resistance of a 1-phase induction motor is 2.5 and its leakage reactance is 2.0 12. On no- load, the motor takes 4 A at 96 V and at 0.25 lagging power factor. The no-load friction and windage loss is negligible. Under the blocked-rotor condition, the input power is 130 W at 6 A and 42 V. Obtain the equivalent circuit parameters. Ans. R, = 2.5 12; R= 3.5 12; X, = 2 12; x = 1.6 12; X.m = 50 12 =

Answers

The equivalent circuit parameters of the 1-phase induction motor are as follows:

Stator resistance (Rs) = 2.5 12

Rotor resistance (Rr) = 3.5 12

Stator reactance (Xs) = 2 12

Rotor reactance (Xr) = 1.6 12

Magnetizing reactance (Xm) = 50 12

To obtain the equivalent circuit parameters of the 1-phase induction motor, we can use the information provided for the no-load and blocked-rotor conditions.

No-Load Condition:

The motor takes 4 A at 96 V and operates at a power factor of 0.25 lagging.

Since the no-load friction and windage loss are negligible, we can assume that the input power is equal to the reactive power (Q) consumed by the motor.

The reactive power can be calculated using the formula Q = V * I * sin(θ), where V is the voltage, I is the current, and θ is the power factor angle.

In this case, Q = 96 V * 4 A * sin(acos(0.25)) = 76.8 VAR (reactive power).

The reactance (Xm) of the motor can be calculated as Xm = V^2 / Q = (96 V)^2 / 76.8 VAR = 120 12.

Blocked-Rotor Condition:

The input power is 130 W at 6 A and 42 V.

Since the motor is in the blocked-rotor condition, the slip (s) is equal to 1 (full stop).

The input power can be calculated using the formula P = V * I * cos(θ), where P is the power, V is the voltage, I is the current, and θ is the power factor angle.

In this case, 130 W = 42 V * 6 A * cos(acos(1)) = 42 V * 6 A = 252 W (active power).

The resistance (R) of the motor can be calculated as R = P / I^2 = 252 W / (6 A)^2 = 7 12.

The reactance (X) of the motor can be calculated as X = V^2 / P = (42 V)^2 / 252 W = 7 12.

Therefore, the equivalent circuit parameters of the 1-phase induction motor are as follows:

Stator resistance (Rs) = 2.5 12

Rotor resistance (Rr) = 3.5 12

Stator reactance (Xs) = 2 12

Rotor reactance (Xr) = 1.6 12

Magnetizing reactance (Xm) = 50 12

The given values for the equivalent circuit parameters may have been rounded for convenience.

To know more about induction refer here:

https://brainly.com/question/32376115#

#SPJ11

Complete each of the following parts and show your work: a.) Draw the electric field around a +3.0 × 10–5 C point source charge. Draw the field lines and indicate their direction. Draw two different equipotential lines. b.) Calculate the force between a +6 µC test point charge and this source charge at a distance of 3.00 cm. (µC = 1.0 × 10–6 C) c.) If the test charge were moved closer to the source charge, would the change in its potential energy be positive, negative or zero? Explain.

Answers

a) Electric field lines radiate outward from the positive charge, and equipotential lines are concentric circles around the charge.

b) The force between the test charge and the source charge is 5.4 N.

c) The change in potential energy would be negative if the test charge is moved closer to the source charge.

a) To draw the electric field around a +3.0 × [tex]10^-^5[/tex] C point source charge, we can use the principle that electric field lines radiate outward from positive charges. The density of field lines represents the strength of the electric field. Here is a visual representation:

```

  +  

  |

  |  

---+---

  |  

  |  

```

The "+" symbol represents the positive point source charge, and the lines radiating outward represent the electric field lines. The direction of the field lines is away from the positive charge, indicating the direction of the electric field.

For the equipotential lines, we can draw two concentric circles around the point charge. The distance between the circles represents a constant potential difference.

```

 ---  

|    |  

|    |  

|    |  

 ---  

```

b) To calculate the force between the +6 µC test point charge and the +3.0 × 10–5 C source charge, we can use Coulomb's Law:

[tex]\[ F = \frac{{k \cdot q_1 \cdot q_2}}{{r^2}} \][/tex]

where F is the force, k is the electrostatic constant (approximately 9 × 10^9 N·m^2/C^2), q1 and q2 are the charges, and r is the distance between the charges.

Substituting the given values:

[tex]\[ F = \frac{{(9 \times 10^9 \, \text{N} \cdot \text{m}^2/\text{C}^2) \cdot (6 \times 10^{-6} \, \text{C}) \cdot (3 \times 10^{-5} \, \text{C})}}{{(0.03 \, \text{m})^2}} \][/tex]

Simplifying the equation:

[tex]\[ F = 5.4 \, \text{N} \][/tex]

Therefore, the force between the test charge and the source charge at a distance of 3.00 cm is 5.4 N.

c) If the test charge were moved closer to the source charge, the change in its potential energy would be negative. This is because the potential energy of a test charge in the presence of an electric field is given by the equation:

[tex]\[ U = q \cdot V \][/tex]

where U is the potential energy, q is the charge, and V is the electric potential. As the test charge approaches the source charge, the electric potential increases due to the increased influence of the source charge. Since the test charge is positive, a decrease in potential energy corresponds to a negative change.

For more such information on: Electric field

https://brainly.com/question/13380972

#SPJ8

If person A is in a stationary car and a car next to them is moving backward, how will this impact their perception of movement? They will feel as if they are moving forward. They will feel as if they are moving backward. They will feel no change in perception. They will feel as if they are floating.

Answers

In this scenario, person A will feel as if they are moving forward despite being in a stationary car.

If person A is in a stationary car and a car next to them is moving backward, it will impact their perception of movement. Due to the relative motion between the two cars, person A will feel as if they are moving forward.

This perception can be attributed to the frame of reference. When the neighboring car moves backward, the surroundings outside the stationary car appear to be moving in the opposite direction. This relative motion creates a visual illusion that tricks the brain into perceiving the stationary car as moving forward.

This phenomenon is similar to when we are sitting in a stationary train and another train moves beside us. Even though our train is stationary, we may feel a sensation of movement in the opposite direction as the neighboring train passes by.

Therefore, in this scenario, person A will feel as if they are moving forward despite being in a stationary car.

For more questions on relative motion, click on:

https://brainly.com/question/24707504

#SPJ8

Label the following statements as True (T) or False (F) (1 mark each) a) CARS spectra contain 3 N−6 bands more than Stokes Raman spectra b) In THz spectroscopy, only very high energy photons are used c) DRIFT spectroscopy is more useful than FTIR for studying soil samples because it more effectively collects the diffusely reflected light d) Rayleigh scattering is an inelastic process e) Raman microscopy using visible light has worse resolution than infrared microscopy

Answers

The answer of the following statements is, a) False,  b) False, c) True, d) False, and e) False.

a) False (F) - CARS spectra do not contain 3N-6 bands more than Stokes Raman spectra. The number of bands in CARS spectra is the same as in Stokes Raman spectra, which is N.

b) False (F) - In THz spectroscopy, low-energy photons in the terahertz frequency range are used. It is not limited to very high energy photons.

c) True (T) - DRIFT spectroscopy is more useful than FTIR for studying soil samples because it effectively collects the diffusely reflected light. Soil samples exhibit high scattering and absorption, making DRIFT spectroscopy advantageous for such analysis.

d) False (F) - Rayleigh scattering is an elastic process where the scattered light has the same energy (frequency) as the incident light. Inelastic scattering processes, such as Raman scattering, involve a shift in energy.

e) False (F) - Raman microscopy using visible light generally has better resolution than infrared microscopy. Visible light has a shorter wavelength, allowing for higher spatial resolution and sharper imaging compared to infrared microscopy.

To learn more about spectra, Click here: brainly.com/question/3692639?

#SPJ11

How does the current in a resistor change if the voltage across the resistor is
increased by a factor of 2?
A. It is increased by a factor of 2.
B. It is reduced by a factor of 2.
C. It is increased by a factor of 4.
D. It is reduced by a factor of 4.

Answers

Answer: A

Explanation:

According to Ohm's law, the current through a resistor is directly proportional to the voltage across it and inversely proportional to its resistance. Mathematically, Ohm's law can be represented as I = V/R, where I is the current, V is the voltage, and R is the resistance.

In this scenario, if the voltage across the resistor is increased by a factor of 2, the current through it will also increase. This is because the resistance of the resistor remains constant, and according to Ohm's law, an increase in voltage results in a proportional increase in current.

Therefore, the correct option is A. The current in the resistor is increased by a factor of 2.

3. t)a 90.0 kg man holding a 62.5 kg box full of china gets into an elevator on the ground floor. the elevator accelerates upward at 1.23 m/s2 . what force is the man required to apply with his arms to the box to avoid dropping it?

Answers

The man needs to apply a force of approximately 1,235 N to the box to avoid dropping it.

To find the force required, we use Newton's second law of motion. First, we calculate the gravitational force acting on the box by multiplying its mass (62.5 kg) by the acceleration due to gravity (9.8 m/s^2), giving us 612.5 N. Since the elevator is accelerating upward, there is an additional net force required to accelerate the box. We can calculate this net force by multiplying the mass of the box (62.5 kg) by the elevator's acceleration (1.23 m/s^2), which equals 76.875 N. To avoid dropping the box, the man needs to apply a force equal to the sum of the gravitational force and the net force, which is approximately 689.375 N.

To learn more about force , Click here: brainly.com/question/30507236?

#SPJ11

In Part II, the independent variable changes to

Answers

In Part II of an experiment, the independent variable is the variable that is changed to see how it affects the dependent variable. The dependent variable is the variable that is measured to see how it is affected by the changes made to the independent variable.

In Part II, the independent variable changes to test the hypothesis and determine the relationship between the independent and dependent variables. The goal is to determine if changing the independent variable has any effect on the dependent variable.In order to change the independent variable, the experimenter must carefully manipulate the conditions of the experiment.

This can involve altering the amount of a particular substance used, changing the temperature, or adjusting the duration of the experiment, among other possibilities. The changes made to the independent variable must be carefully controlled so that they do not introduce extraneous variables that could affect the results of the experiment.

Finally, the results of the experiment must be carefully analyzed to determine if there is a statistically significant relationship between the independent and dependent variables. If the results show that the independent variable has a significant effect on the dependent variable, then the hypothesis is supported. If there is no significant effect, then the hypothesis must be revised or rejected.

For more such questions on independent variable, click on:

https://brainly.com/question/82796

#SPJ8

What is meant by the term "Wind Shear" and how does it impact the output energy potential of a wind turbine.
b) If Cp = 4a (1-a)2 , using differentiation, derive the maximum value of Cp and under what conditions can this maximum value be achieved?

Answers

a) Wind shear, caused by variations in wind speed and direction with height, can impact a wind turbine's energy output by creating turbulent and unstable wind conditions that make energy extraction less efficient.

b) The maximum value of Cp for the given equation is obtained when a = 1/3.

a) Wind shear refers to the variation in wind speed and direction with height. It is caused by factors such as friction with the ground and atmospheric conditions. Wind shear can impact the output energy potential of a wind turbine because it affects the amount of kinetic energy available in the wind. Strong wind shear can result in turbulent and unstable wind conditions, making it more challenging for the wind turbine to extract energy efficiently.

b) To derive the maximum value of Cp using differentiation, we start with Cp = 4a(1-a)². Let's differentiate Cp with respect to a:

dCp/da = 4(1-a)² - 8a(1-a)

To find the maximum value of Cp, we set dCp/da = 0 and solve for a:

4(1-a)² - 8a(1-a) = 0

Expanding and simplifying the equation:

4 - 4a - 8a + 8a² - 8a² = 0

Combining like terms:

-12a + 4 = 0

Solving for a:

12a = 4

a = 4/12

a = 1/3

Therefore, the maximum value of Cp can be achieved when a = 1/3.

Learn more about Wind Shear at

https://brainly.com/question/30450954

#SPJ4

A laser pulse with wavelength 352 nm contains 4.32 mJ of energy. How many photons are in the laser pulse?

Answers

The number of photons in the laser pulse is approximately 2.559 × 10^19 photons.

To calculate the number of photons, we use the equation relating energy and wavelength of a single photon. First, we convert the given energy of the laser pulse from millijoules to joules. Then, using Planck's constant and the speed of light, we calculate the energy of a single photon based on the given wavelength. Finally, we divide the total energy of the pulse by the energy of a single photon to obtain the number of photons. In this case, the number of photons in the laser pulse is approximately 2.559 × 10^19 photons.

To learn more about photons, Click here: brainly.com/question/33017722?

#SPJ11

The moment magnitude scale differs from the Richter scale...... because the Richter scale assumes the rigidity of the earth's surface and specific rock types for wave propagation because the Moment scale assumes energy release over large areas and accounts for wave propagation through various rock types Moment magnitude steps are calculated the same as the Richter scale which uses the logarithmic scale because the Moment scale measures appreciable amounts of damage using the Roman Numeral number I through XII

Answers

A measure of the strength of earthquakes is the Richter scale, which is also known as the Gutenberg–Richter scale, the Richter magnitude scale, and the Richter scale.

The Richter scale relies on specific rock types and the rigidity of the earth's surface for wave propagation, whereas the moment magnitude scale relies on energy release over large areas and takes into account wave propagation through a variety of rock types.

The largest wiggle (amplitude) on the recording is measured by the Richter scale, while other magnitude scales measure different aspects of the earthquake.

The Moment Magnitude scale is currently used by the USGS to report earthquake magnitudes, but numerous other magnitudes are calculated for research and comparison.

To know more about the Richter scale,

brainly.com/question/14844624

#SPJ4

The power of a PV panel is rated at the peak solar insolation of 1000 W/m2. The size of a typical 300 W PV panel is about 2.0 m2. (a) What is the efficiency of such PV panels? (b) If you install 10 pieces of 300 W PV panels on your house roof top in Wyoming, how much electrical energy is it produced daily? Assume on average, the peak sun hours in the Wyoming area are 3.2 hours. (c) If 50% of the energy collected by the PV panel is used to heat up the water in your home water heater, it can supply to heat up how many gallons of water from 15 C to 55 C? 1 liter of water weighs 1 kg in mass, 1 gallon = 4.546 liters, 1 kWh = 3.6x106 J

Answers

(a) The efficiency of the PV panel can be calculated using the formula:Efficiency = (Power output / Power input) × 100Where,Power output = The power generated by the PV panel (300 W in this case)Power input = The solar insolation (1000 W/m2 in this case) × Area of the panel (2.0 m2 in this case)Efficiency = (300 / (1000 × 2)) × 100= 15%

(b) The total power generated by 10 pieces of 300 W PV panels is given as:Total power = Power of 1 panel × Number of panels= 300 × 10= 3000 WPeak sun hours in Wyoming = 3.2 hours Therefore, the total energy produced daily is given as:Energy produced = Total power × Peak sun hours= 3000 × 3.2= 9600 Wh or 9.6 kWh(c) The energy produced by the PV panel is given as:Energy produced = Power output × Time= 300 × 3.2 × 50/100= 48 kWh= 48,000 Wh= 48,000 / 3.6 × 106 kWh= 0.013 kWh or 13 Wh Weight of 1 gallon of water = 4.546 × 1 = 4.546 kg Mass of water = Volume × Density= 4.546 × 15 = 68.19 kg= 68.19 / 1 = 68.19 liters

Heat required to increase the temperature of 1 liter of water from 15°C to 55°C is given as:Heat = mass × specific heat capacity × temperature rise= 1 × 4.18 × (55 - 15)= 209.2 JHeat required to increase the temperature of 68.19 liters of water from 15°C to 55°C is given as:Heat = 68.19 × 209.2 J= 14,250 J or 0.01425 kWh Energy produced by the PV panel is 0.013 kWh Therefore, the number of gallons of water that can be heated up is given as:Number of gallons = Energy produced / Heat required= 0.013 / 0.01425= 0.91 gallons Therefore, the PV panel can supply to heat up 0.91 gallons of water from 15°C to 55°C.

To know more about Efficiency visit:-

https://brainly.com/question/31458903

#SPJ11


9. Jack makes some concrete steps. The diagrams show their dimensions in
centimetres.
a) Calculate, in cm³, the volume of concrete
needed.
100
b) There are 1000000cm³ in 1m³. Change
your answer from a) into m³
c) The density of concrete is 2400kg/m³. What will be the mass of the steps?
200
Not to scale

Answers

a)  The volume of concrete needed is `12000 cm³

b) The volume of concrete needed is `0.012 m³`.

c)The mass of the steps is `28.8 kg`.

a)Volume of concrete needed can be calculated by multiplying the length, breadth and height of the concrete steps.

Thus the volume of concrete steps

= `40 × 30 × 10`

= `12000 cm³`.

Therefore, the volume of concrete needed is `12000 cm³`.

b) Given, `1m³` is equal to `1000000cm³`.

Thus the volume of concrete steps in `m³` will be

`12000/1000000 = 0.012 m³`.

Therefore, the volume of concrete needed is `0.012 m³`.

c) Density is defined as mass per unit volume.

Thus, the mass of concrete steps can be calculated by multiplying the density of concrete and its volume.

The mass of the steps = `0.012 m³ × 2400 kg/m³ = 28.8 kg`.

Therefore, the mass of the steps is `28.8 kg`.

Know more about volume    here:

https://brainly.com/question/14197390

#SPJ8

Lord Henry is performing an experiment where he is able to measure the force of gravity between
two masses (m1 and m2). Based on the data he records below, what claim can he make about how
the force of gravity is related to the size of the masses?
Mass One. Mass Two. Force of G Between
100kg. 100kg. 66.7N
200kg. 100 kg. 133.5N
100kg. 300kg. 200.2N
200kg. 300 kg. 400.4N


1) Both masses are directly proportional to the force

2) Mass one is directly proportional to the force

4) Both masses are inversely proportional to the force

3) Mass two is inversely square proportional to the force

Answers

The claim that can be made about how the force of gravity is related to the size of the masses is: 1) Both masses are directly proportional to the force.

How to determine the claim that can be made about how the force of gravity

To determine the relationship between the force of gravity and the size of the masses based on the data provided, we can analyze the ratios of the masses and the corresponding forces.

Let's examine the ratios:

For the first ratio: (100 kg/100 kg) = 1

The corresponding force ratio is: (66.7 N/66.7 N) = 1

For the second ratio: (200 kg/100 kg) = 2

The corresponding force ratio is: (133.5 N/66.7 N) = 2

For the third ratio: (100 kg/300 kg) ≈ 0.33

The corresponding force ratio is: (200.2 N/66.7 N) ≈ 3

For the fourth ratio: (200 kg/300 kg) ≈ 0.67

The corresponding force ratio is: (400.4 N/66.7 N) ≈ 6

Based on these ratios, we can observe that the force of gravity is not directly proportional to either mass individually. However, the force of gravity is directly proportional to the product of the masses.

Therefore, the claim that can be made about how the force of gravity is related to the size of the masses is:

1) Both masses are directly proportional to the force.

Learn more about gravity at https://brainly.com/question/557206

#SPJ1

a thin rod of length 3.15 m and mass 14.7 kg is rotated at an angular speed of 3.90 rad/s around an axis perpendicular to the rod and through one of its ends. find the magnitude of the rod's angular momentum.

Answers

The magnitude of the rod's angular momentum is approximately 176.62 kg·m²/s.

The magnitude of an object's angular momentum is given by the formula:

L = I * ω

Where:

L is the angular momentum

I is the moment of inertia

ω is the angular velocity

For a thin rod rotating around an axis perpendicular to the rod and through one of its ends, the moment of inertia is given by:

I = (1/3) * m * [tex]L^{2}[/tex]

Where:

m is the mass of the rod

L is the length of the rod

Substituting the given values into the equation:

m = 14.7 kg

L = 3.15 m

I = (1/3) * 14.7 kg * [tex](3.15 m)^2[/tex]

Calculating the moment of inertia:

I ≈ 45.31425 kg·m²

Now, we can find the magnitude of the rod's angular momentum using the formula:

L = I * ω

Substituting the given angular velocity:

ω = 3.90 rad/s

L = (45.31425 kg·m²) * (3.90 rad/s)

Calculating the angular momentum:

L ≈ 176.62355 kg·m²/s

Therefore, the magnitude of the rod's angular momentum is approximately 176.62 kg·m²/s.

To know more about angular momentum here

https://brainly.com/question/33408478

#SPJ4

a boy of mass 60 kg and a girl of mass 40 kg are together and at rest on a frozen pond and push each other apart. the girl moves in a negative direction with a speed of 3 m/s. what is her momentum?

Answers

Explanation:

Momentum = m * v

                   = 40 kg * ( -3 m/s) = -120 kg m/s

a closed, circular loop has a counter-clockwise current flowing through it as viewed by a person on the right, as shown in the figure. if a second closed circular loop with the same radius approaches this loop with constant velocity along a common axis as shown, in what direction will a current flow in the approaching loop as viewed by the person on the right? (also consider if there is an attractive or repulsive force between the two loops.) a) clockwise b) counter-clockwise c) no current will be induced because the velocity of approach is constant.

Answers

Based on Faraday's law of electromagnetic induction, when there is a changing magnetic flux through a closed loop, an induced current is produced in the loop. The direction of the induced current can be determined using Lenz's law.

According to Lenz's law, the induced current will flow in a direction that opposes the change in magnetic flux. In this case, as the approaching loop moves closer to the first loop, the magnetic flux through the approaching loop will increase. Therefore, the induced current in the approaching loop will flow in a direction that produces a magnetic field opposing the magnetic field of the first loop.
Since the current in the first loop is counter-clockwise as viewed by the person on the right, the induced current in the approaching loop will flow clockwise as viewed by the person on the right. This means the answer is (a) clockwise.
Regarding the attractive or repulsive force between the two loops, the induced current in the approaching loop will create a magnetic field that opposes the magnetic field of the first loop. This leads to a repulsive force between the two loops.

To learn more about, Faraday's Law, click here: https://brainly.com/question/1640558

#SPJ11

Which equation could be used to find the velocity (v⃗ ) if it is placed into a medium Earth orbit? Hint: G is the universal gravitational constant, and mp is the mass of the planet that the satellite will be orbiting.(1 point)

Answers

The equation that can be used to find the velocity (v⃗) of a satellite in a medium Earth orbit is v⃗ = √(G * mp / r).

The equation that can be used to find the velocity (v⃗) of a satellite placed into a medium Earth orbit is the formula for orbital velocity, which is derived from the gravitational force and centripetal force acting on the satellite. The equation is:

v⃗ = √(G * mp / r)

In this equation, G represents the universal gravitational constant, mp represents the mass of the planet (in this case, Earth) that the satellite is orbiting, and r represents the radius of the orbit. The orbital velocity is the speed at which the satellite must travel in order to maintain a stable orbit around the planet.

The equation is derived by equating the gravitational force between the satellite and the planet to the centripetal force required for the satellite to maintain a circular orbit. By solving for velocity, we can determine the speed at which the satellite needs to move to stay in orbit.

Know more about gravitational force here:

https://brainly.com/question/72250

#SPJ8

As the volume of a gas increases, its pressure
(Assume all other factors are held constant).

Answers

As the volume of a gas increases so does the pressure

Relative humidity is proportional to the vapor pressure divided by the saturation vapor pressure. If the air temperature suddenly decreases, the relative humidity will ___[a]____.

Answers

If the air temperature suddenly decreases, the relative humidity will increase. As the temperature drops, the saturation vapor pressure decreases at a faster rate than the actual vapor pressure, leading to an increase in the ratio of vapor pressure to saturation vapor pressure and therefore an increase in relative humidity.

The relative humidity usually rises when the air temperature drops. As the temperature drops, the saturation vapour pressure—the maximum quantity of water vapour the air can hold—decreases. By dividing the vapour pressure (the amount of water vapour in the air) by the saturation vapour pressure, relative humidity is obtained. The ratio of the two values grows when the saturation vapour pressure lowers with decreasing temperatures while the actual vapour pressure remains relatively constant in the near term. This raises relative humidity.

This link between temperature and relative humidity explains why cooler days have higher relative humidity, even when the air's moisture content doesn't vary. When the temperature drops, the same amount of moisture becomes a bigger proportion of the reduced saturation vapour pressure, raising relative humidity.

To know  more about temperature

https://brainly.com/question/27944554

#SPJ4

the 50-lb package starts from rest, slides down the smooth ramp, and is stopped by the spring. if you want the package to be brought to rest 6 in from the point of contact, what maximum deceleration is the package subjected to?

Answers

The maximum deceleration experienced by the package is approximately 2.20 m/s².

To determine the maximum deceleration experienced by the 50-lb package as it slides down the smooth ramp and is stopped by the spring, we can analyze the forces acting on the package.

Initially, when the package starts from rest, the only force acting on it is the gravitational force (weight). As it slides down the ramp, this force causes the package to accelerate. At the point of contact with the spring, the package has acquired a certain velocity.

To bring the package to rest 6 inches from the point of contact, the spring must exert a force that opposes the motion of the package. This force acts in the opposite direction of the velocity and causes deceleration.

Using Newton's second law of motion, we can relate the force, mass, and acceleration:

Force = mass * acceleration

In this case, the force exerted by the spring equals the weight of the package (50 lb) since the package comes to rest. Therefore, we have:

Force by the spring = 50 lb

To find the maximum deceleration, we need to convert the weight from pounds to mass in the appropriate unit. 1 lb is approximately equal to 0.454 kg.

50 lb ≈ 22.7 kg

Now, we can calculate the deceleration:

Force by the spring = mass * acceleration

22.7 kg * acceleration = 50 lb

acceleration = 50 lb / 22.7 kg

acceleration ≈ 2.20 m/s²

Therefore, the maximum deceleration experienced by the package is approximately 2.20 m/s²

To know more about acceleration

https://brainly.com/question/460763

#SPJ4

Physical Science B - Accommodated Final
6) The gravitational force of a lunar rover is 1,607.2 Newtons on Earth. What will the rover’s gravitational force be on the Moon? On Earth, g = 9.8m/s2.
On the Moon, g = 1.62 m/s2.
a. 265.7 n
b. 2,603.7 n
7) Which sentence best describes how a self-directed learner might investigate gravity?
a. She would think of a way to test the effect of gravity, develop a plan, and carry out the investigation on her own.
b. She would only follow her teacher’s instructions for testing the effects of gravity.
8) Which sentence best describes a self-directed learner?
a. She uses her own initiative to set learning goals, find resources, and plan how to carry out investigations.
b. She rushes through a project very quickly.
9) Which student is using innovative problem-solving to investigate potential energy and kinetic energy?
a. Lisa thinks about ways that potential energy and kinetic energy occur in her own life, chooses one, and designs a demonstration to show the relationship between the two kinds of energy.
b. Pedro researches potential and kinetic energy at the library and writes a report on the relationship between them.
10) How much more kinetic energy does a 5-kilogram bowling ball have when it is rolling at 7 meters per second than when it is rolling at 5 meters per second? Kinetic Energy = 1/2 x mass x velocity^2
a. 60j
b. 10j

Answers

Physical Science B - Accommodated Finalb. 10jPhysical Science is the branch of natural science that deals with matter, energy, and their interactions. It can be divided into two branches: Chemistry and Physics. Both of these disciplines work together to study the physical world.

The study of matter, its structure, and properties is known as Chemistry. Physics, on the other hand, investigates the fundamental principles that govern the physical world and the relationships between matter and energy.In Physical Science, learners study topics such as motion and force, energy and energy transfer, wave properties and behavior, sound and light, and matter and its properties. Learners learn the difference between physical and chemical changes in matter, how to identify and classify elements, and the impact of energy on matter. In addition, learners explore the laws of motion, electricity, and magnetism.Physical science can be related to our daily lives in many ways. For example, the principles of physical science are used in the design and manufacture of everyday objects such as cars, buildings, and household appliances. The principles of physical science are also used in the field of medicine to develop new treatments and cures for diseases and injuries.In conclusion, Physical science plays a critical role in our lives and the world around us. It allows us to explore the universe and provides us with the knowledge we need to create and innovate. Its influence is felt in all areas of our lives and will continue to be an important area of study in the future.

For such more question on motion

https://brainly.com/question/26083484

#SPJ8

what can a digger do to keep the ball from going out of bounds? a. use two open, flat palms tilted upward and backward. b. use the wrist area to contact the ball and reverse the hands. c. use two cupped hands and contact the ball at a 45-degree angle. d. use the palm of one hand to make contact with the ball and spike it underhand.

Answers

A digger should employ option c. use two cupped hands and contact the ball at a 45-degree angle. This lets the digger hit their goal. The digger controls and stays in bounds using cupped hands.

To keep the ball from going out of bounds, a digger can use option (c) - use two cupped hands and contact the ball at a 45-degree angle. When digging a ball, employing two cupped hands provides a wider surface area to make contact with the ball, enhancing the possibilities of controlling its trajectory. This is because there is more surface area to make contact with the ball.

The digger can keep the ball in play and prevent it from going out of bounds by making contact with the ball at an angle of 45 degrees and directing it upwards and towards their intended goal. This keeps the ball from going out of bounds. Because cupped hands aid to absorb impact and create a more regulated rebound, this technique enables superior control and precision. This is because the hands are cupped together. In volleyball, a typical and effective strategy for successfully digging the ball and maintaining play is to position both hands at a 45-degree angle while cupping them together.

To know  more about surface area

https://brainly.com/question/30231626

#SPJ4

please explain laws of motion clearly i'll give brain list thank you​

Answers

Ah, I see, you seek a take on Newton's famed Laws of Motion. Hold onto your jingle bell hat, for we're about to embark on a fantastical journey through the realm of physics, the lair of the laws that govern our world's jig and jive.

Law the First: An object at rest tends to stay at rest, and an object in motion tends to stay in motion, unless acted upon by an outside force.

Imagine a loaf of bread, comfy and cozy in its bakery basket. It has no intent to go gallivanting about. Only when a force, say a peckish person, picks it up, does it venture off to new territories (typically a kitchen). Likewise, imagine a merry-go-round spinning in a constant twirl. It would keep on twirling forever, only stopping if an external force, like a brave child or friction, intervened. This is the realm's Lazy Law, where things left alone will continue doing what they're doing.

Law the Second: Force equals mass times acceleration, or F=ma.

Consider a bumbling bumblebee and a gargantuan gargoyle, both minding their own business. A tiny gust of wind might send our bumblebee into a frantic flutter, but the gargoyle wouldn't budge an inch. Why? It's because the bumblebee's mass is tiny and easy to accelerate, while the gargoyle is hulking and needs a lot more push to budge. Thus, the larger the push (force) or the smaller the thing you're pushing (mass), the faster it's going to zip about (acceleration). I call this the "Bee and Gargoyle" Law.

Law the Third: For every action, there's an equal and opposite reaction.

Imagine a jovial jester, springing off a trampoline. As they push down on the trampoline (action), it pushes back with equal strength, catapulting the jester into the sky (reaction). Or think of a knight, slashing his sword against an opponent's. The more force he exerts, the more force is thrown back at him. This "Boomerang" Law ensures that every action in our whimsical world prompts a response of equal magnitude.

So, there you have it! The three Laws of Motion. A world without them would be a world without dancing, laughter, or the delightful toss of a pie in someone's face. Aren't we lucky that Sir Isaac Newton was such a diligent fellow!

how deep can a nuclear sub go

Answers

A submarine can dive to a depth of 300 meters, while Los Angeles-class nuclear test vessels can dive to a depth of 450 meters (1,500 ft). This maximum depth is 675 to 900 meters (2,250 to 3,000 feet). Active and passive sonar are the most common forms of sonar on submarines.
Other Questions
Orthogonally diagonalize the matrix A given below. That is, find an orthogonal matrix, P, and a diagonal matrix, D, such that A = PDPT. To save you time, the eigenvalues of A are = 0, 3, -3. A = 1 -2 1 -2 1 1 1 1 -2 The iterative process below can be used to find 2 approximate solutions to x - 5x - 11 = 0 to 2 d.p. Starting with x = 5, use the iterative process to find an approximate solution to x - 5x - 11 = 0. Give your answer to 2 d.p. X Step 1: Start with a value of x Step 2: Find the value of 5+ TAL 11 x Step 3: Round your answer to Step 2 and the value of x to 2 d.p. If they are the same, then stop. You have found an approximate solution. If not, then go back to Step 1, using your exact answer to Step 2 as the new value for x. "How much should Kelsey have in a savings account that is earning2.25% compounded monthly, if he plans to withdraw $2,150 from thisaccount at the end of every month for 10 years? Round to thenearest" PLSS HELPP!! What is one major similarity between Mongolia and Taiwan? Define a function \( f: \mathbb{R} \rightarrow \mathbb{R} \) by \( f(x)=\left\{\begin{array}{ll}x^{2} \sin \left(\frac{1}{x}\right), & \text { if } x \neq 0 \\ 0, & \text { if } x=0\end{array}\right. +20 + 50 = 5 cos 4t (0) = 0, (0) = Hint show that and use following partial fraction expansion 11s - 32 5s 11s 10 (s+2s+5) (s +4) 37 (s +2s+5) 37 (s +4) Using Proof By ConstructionProve that there are integers such that a2 divides b3 but a does not divide b. Flexible packaging demands are rapidly increasing because:a) Less materials are required to make a package compared to arigid packageb) Less space requirement when emptyc) Flexibles are easy to re Consider the following elementary n th order reaction where reactant A decays, resulting in the formation of product P : nA Product derive the integral rate equation and its half-life period (t 1/2) expressions as a function of initial concentration [A 0] and the effective rate constant (k eff ) of the reaction. The variables for Part I of this experiment include whether or not the car hits the barrier and the distance that the washers travel. Use the drop-down menus to identify the independent and dependent variables.The independent variable, the one that is intentionally manipulated, is .The dependent variable, the one that you measure the response in, is . r=Find \( \mathrm{a}_{1} \) and \( \mathrm{r} \) for the following geometric sequence. \[ a_{3}=15, a_{7}=0.0015 \] \[ a_{1}= \] Write a balanced equation for each reaction. a. K2CO3 (aq)+HCl(aq)_________________ b. HI(aq)+NaHCO3 (aq) __________________ What are the root causes of nationalism and populism in the modern era? Provide data to explain these causes. How are right-wing and left-wing populists similar and different? How do populism and nationalism in western Europe compare with eastern Europe? How is nationalism and populism in the United States similar to and different from nationalism and populism in Europe? Consider Tans essay Mother Tongue and what you learned about code-switching. Do you ever employ any forms of code-switching when you communicate with others? Write a one-page reflective essay discussing code-switching. Do you think code-switching represents a barrier or a bridge to communication? Your essay should contain a logical introduction, a body, and conclusions. To improve your essay, try brainstorming, outlining, and revising your writing drafts before submitting your final version. need answered Asap!Find the elasticity of demand (E) for the given demand function at the indicated values of p. Is the demand elastic, inelastic, or neither at the indicated values?q = 404 - 0.2p^2a. $22b. $40 Please imagine how you could conduct a correlational study. on how missing class affects students gpa.What would your independent variable and dependent variables be and how would you measure them? How do you predict that that are related (positively, negatively or not correlated)?Please write 2-3 sentences. A genetic expenment with peas resulted in one sample of offspring that consisted of 439 green peas and 154 yetbow peas. a. Construct a 95% confidence interval to estimate of the percentage of yellow peas b. Based on the confidence interval, do the results of the experiment appear to contradict the expectation that 25% of the offspring peas would be yellow? a. Construct a 95% confidence interval Express the percentages in decimal form p< (Round to three decimal places as needed) b. Based on the confidence interval, do the results of the expeniment appear to contradict the expectation that 25% of the offspring peas would be yeliow? No, the confidence interval includes 0.25, so the true percentage could easly equal 25% Yes, the confidence interval does not include 0.25, so the true percentage could not equal 25% b. Income is recognized when incurred c. Income is recognized when earned d. Income is recognized when declared 10. Under BIR regulations, income in long-term construction contracts is recognized through: a. Percentage of completion method only b. Completed contract method only C. Zero-profit method only d. Either of the above methods at the option of the taxpayer 11. Installment basis of reporting of income shall apply to casual sale of personal property upon compliance with all of the following requisites, except: a. The price exceeds P1,000 b. The property would not be included in the inventory of the taxpayer if on hand at the end of the taxable year The price will be paid in at least 3 installments C. d. Initial payments do no exceed 25% of the selling price 12. Sana is a resident citizen, Tzuyu is a non-resident citizen, while Mina is a resident alien. Who among them is subject to income tax on income derived from sources within and outside the Philippines? a. Sana only b. Sana and Tzuyu only C. Sana and Mina only d. Sana, Tzuyu, and Mina 13. Momo is a resident citizen, Nayeon is a non-resident citizen, while Dahyun is a resident alien. Who among them is subject to income tax only on income derived from sources outside the Philippines? a. Momo only b. Nayeon only c. Dahyun only d. Neither Momo, Nayeon, or Dahyun 14. Big Hit Corporation is a domestic corporation. Which of the following items of income is subject to tax? I. Gain from sale of personal property in the Philippines II. Gain from sale of personal property in South Korea a. I only b. ll only c. Both I and II d. Neither I nor II 15. JYP Corporation is a resident foreign corporation. Which of the following item of income is not subject to tax? I. Income from Philippine operations II. Income from American operations a. I only b. Il only C. Both I and II d. Neither I nor II 16. The situs of service income is: a. Where the payment for services is made b. Where the service contract was perfected C. Where the services are performed d. Where the party availing of the services is located 17. The situs of income from sale of real property is determined by a. The place where the real property is located b. The place where the registered owner of the real property resides. C. The place where the current possessor of the real property has citizenship Draw the structure (s) - 1-bromo-1-chloropropane show wedges and dashes. Draw highest Newman projection looking down th C1-C2 bond Harry, age 45, works for a nonprofit organization that has adopted both a Section 403(b) and a Section 401(k) plan. In 2022, he contributes $9,000 to the Section 403(b) plan in before-tax elective deferrals. How much, if any, can Harry now contribute to the Section 401(k) plan in 2022? A) $11,500 B) $20,500 C) $27,000 D) $0