An egg dropped on the sidewalk normally breaks, but an egg dropped on the gras might not break because: the grass provides a cushioning effect that prevents the egg from shattering when it hits the ground.
What is cushioning effect?Cushioning effect is a phenomenon in which the price of a product or service is reduced when it is combined with another product or service, thus creating a better value for the customer. This effect is a result of the customer perceiving that they are getting a better bargain than if they were to buy the product or service on its own. This effect is often seen in the retail industry, where customers are offered discounts when they purchase multiple items from the same store. It can also be seen in the service industry, where customers are often offered bundled services at a discounted rate.
The grass acts as a shock absorber, distributing the force of the impact over a larger area and thus reducing the amount of force that would be concentrated on the eggshell. This reduces the chance of the shell cracking or breaking upon contact with the ground.
To learn more about cushioning effect
https://brainly.com/question/15142637
#SPJ4
a certain coin has a diameter of 22.0 mm, a thickness of 1.95 mm, and weighs 0.04905 n. what is its density?
If a certain coin has a diameter of 22.0 mm, a thickness of 1.95 mm, and weighs 0.04905 n then the density of the coin is 5,956 kg/m^3.
To find the density of the coin, we need to know its mass. We can use the weight of the coin, which is 0.04905 N, to find its mass because weight is equal to mass times acceleration due to gravity. Assuming that the acceleration due to gravity is 9.81 m/s^2, the mass of the coin is 0.005 kg.
Now we can use the formula for density, which is mass divided by volume. The volume of the coin can be calculated using its diameter and thickness. The formula for the volume of a cylinder is πr^2h, where r is the radius (half of the diameter) and h is the height (thickness).
The radius of the coin is 11.0 mm (half of 22.0 mm), so the volume is π(11.0 mm)^2(1.95 mm) = 838.51 mm^3. To convert this to cubic meters (m^3), we divide by 1,000,000, so the volume is 0.00083851 m^3.
Now we can calculate the density of the coin by dividing its mass by its volume:
Density = Mass/Volume = 0.005 kg/0.00083851 m^3 = 5,956 kg/m^3
Therefore, the density of the coin is 5,956 kg/m^3.
To know more about density visit :
https://brainly.com/question/2436188
#SPJ11
Derive an equation for the initial horizontal velocity v0, in terms of the spring constant k, the compression of the spring, x, the mass m of the object, and any fundamental constants
The initial horizontal velocity v0 of the object can be expressed in terms of the spring constant k, the compression of the spring x, and the mass m of the object as:
v0 = √(k[tex]x^{2}[/tex]/m)
Let's assume an object of mass m is placed on a spring with spring constant k and compressed by a distance x. When the spring is released, it will exert a force on the object in the upward direction, and the object will begin to move upward.
At the moment the object loses contact with the spring, the spring potential energy stored in the spring will be converted into kinetic energy of the object. This means that the spring potential energy must be equal to the kinetic energy of the object.
The spring potential energy can be expressed as
U = 1/2 k[tex]x^{2}[/tex]
The kinetic energy of the object can be expressed as
K = 1/2 m[tex]v_{0} ^{2}[/tex]
Where v0 is the initial horizontal velocity of the object.
Setting U equal to K, we get
1/2 k[tex]x^{2}[/tex] = 1/2 m[tex]v_{0} ^{2}[/tex]
Solving for v0, we get:
v0 = √(k[tex]x^{2}[/tex]/m)
Therefore, the initial horizontal velocity v0 of the object can be expressed in terms of the spring constant k, the compression of the spring x, and the mass m of the object as:
v0 = √(k[tex]x^{2}[/tex]/m)
To know more about mass here
https://brainly.com/question/29038117
#SPJ4
How does the amplitude of the wave depend on the distance from the source?.
The amplitude of a wave typically decreases as the distance from the source increases. This is because the energy of the wave is spread out over a larger area as it travels, resulting in a reduction in the intensity and amplitude of the wave.
other factors such as the frequency and nature of the medium through which the wave is travelling can also affect its amplitude over distance. In general, the further away from the source of the wave you are, the weaker its amplitude will be.
The amplitude of a wave is the maximum displacement of the wave from its equilibrium position. It is directly related to the energy carried by the wave.
As the wave propagates from its source, the energy is distributed over a larger area. This distribution results in a decrease in amplitude.
In general, the amplitude of a wave decreases with increasing distance from the source due to factors like spreading, absorption, and interference.
The rate at which the amplitude decreases depends on the type of wave and the medium through which it propagates. For example, sound waves lose amplitude faster in air compared to water.
In conclusion, the amplitude of a wave typically decreases as the distance from the source increases, as the energy is distributed over a larger area.
Learn more about wave
brainly.com/question/25954805
#SPJ11
72) At what temperature would the root mean square speed of oxygen molecules, O2, be if oxygen behaves like an ideal gas? The mass of one O2 molecule is 5.312 × 10-26 kg, and the Boltzmann constant is 1.38 × 10-23 J/K.
A) 0.251 K
B) 2090 K
C) 6270 K
D) 1.52 × 1023 K
at a temperature of 2.41 K, the rms speed of oxygen molecules would be approximately 1000 m/s.
What is Temperature?
Temperature is a measure of the average kinetic energy of the particles in a system. It is commonly measured in degrees Celsius (°C) or Fahrenheit (°F), or in the Kelvin (K) scale, which is based on the theoretical lowest possible temperature, known as absolute zero. Temperature is a fundamental concept in thermodynamics.
For oxygen molecules, m = 5.312 × [tex]10^{-26}[/tex] kg, and k = 1.38 × [tex]10^{-23[/tex] J/K. We need to find the temperature T at which the rms speed of oxygen molecules is given.
Rearranging the above equation, we have:
T = ([tex]m * v_rms^{2}[/tex]) / (3k)
Substituting the given values, we get:
T = (5.312 × [tex]10^{-26}[/tex]) [tex]kg * v_rms^{2}[/tex]) / (3 * 1.38 × [tex]10^{-23[/tex] J/K)
We need to solve for T when v_rms = ?
Since the temperature at which the rms speed is required is not given, we can assume any value of v_rms and find the corresponding temperature. For example, if we assume v_rms = 1000 m/s, we get:
T = (5.312 × [tex]10^{-26}[/tex]) kg *[tex](1000 m/s)^{2}[/tex] / (3 * 1.38 × [tex]10^{-23[/tex]) J/K) = 2.41 K
Learn more about Temperature from the given link
https://brainly.com/question/26866637
#SPJ4
Let's compare the Momentum Principle and the Angular Momentum Principle in a simple situation. Consider a mass m falling near the Earth (see figure below). Neglecting air resistance, the Momentum Principle gives
dpy/dt = ?mg,
yielding
dvy/dt = ?g
The Momentum Principle states that the rate of change of momentum of a system is equal to the net external force acting on the system.
What is momentum?Momentum is a physical concept that describes an object's tendency to maintain its current state of motion, either in speed or direction, unless acted upon by an outside force. Momentum is a vector quantity, meaning it has both magnitude (or speed) and direction. It is the product of an object's mass and velocity and is often represented by the symbol "p."
In the case of the mass m falling near the Earth, the only external force acting on the system is the gravitational force, which is equal to mg, where g is the acceleration due to gravity. Thus, the Momentum Principle gives dpy/dt = mg. This can be rewritten as dvy/dt = g, where vy is the vertical velocity of the mass m.
On the other hand, the Angular Momentum Principle states that the rate of change of angular momentum of a system is equal to the net external torque acting on the system. Since the mass m is falling in a straight line, there is no torque (or rotational force) acting on the system, and hence the Angular Momentum Principle does not apply.
To learn more about momentum
https://brainly.com/question/18798405
#SPJ4
what is the minimum rate of flow at which a stream of water can maintain the transportation of pebbles 1.0 cenimeter in diametert
The minimum rate of flow at which a stream of water can maintain the transportation of pebbles 1.0 centimeter in diameter is dependent on several factors such as the shape and weight of the pebbles, as well as the velocity and turbulence of the water.
In general, larger and heavier pebbles require faster and stronger currents to be transported, while smoother and lighter pebbles can be moved by slower currents. There are various equations and formulas used to calculate the threshold velocity and critical shear stress required to move sediment particles, including the Shields criterion and the Einstein-Brown equation. These formulas take into account factors such as the size, shape, density, and porosity of the particles, as well as the properties of the fluid such as viscosity and density. The minimum rate of flow required to transport pebbles 1.0 centimeter in diameter depends on multiple factors and can be determined using sediment transport equations and formulas.
The minimum rate of flow at which a stream of water can maintain the transportation of pebbles 1.0 centimeter in diameter is known as the critical flow velocity. This velocity depends on factors such as pebble size, shape, and density, as well as water density and viscosity.
The critical flow velocity for pebbles with a 1.0 centimeter diameter typically ranges from 15 to 60 cm/s. Critical flow velocity is the threshold at which sediment particles (like pebbles) can be lifted and transported by the water stream. If the flow velocity is below this threshold, the pebbles will remain stationary, and if it's above, they will be moved by the water.
It's essential to consider the Stokes' law and the Shields criterion, which help to determine the critical flow velocity. These calculations take into account factors such as water and particle density, particle size, and water viscosity.
To know more about turbulence, visit:
https://brainly.com/question/30664596
#SPJ11
On a distant asteroid, a large catapult is used to throw chunks of stone into space. Could such a device be used as a propulsion system to move the asteroid closer to the earth?
While a large catapult could potentially launch chunks of stone into space, it would not be an effective propulsion system for moving an asteroid closer to Earth. The force produced by the catapult would not be strong enough to overcome the gravitational pull of the sun and other celestial bodies, making it impossible for the asteroid to change its trajectory significantly.
Additionally, the repeated use of a catapult could damage the asteroid and alter its natural composition. To move an asteroid closer to Earth, a more powerful and sophisticated propulsion system, such as ion engines or gravitational tractor technology, would be necessary. These methods use the natural forces of the universe to gradually alter the asteroid's course and bring it closer to our planet.
you know more about large catapult pls visit-
https://brainly.com/question/26263539
#SPJ11
17) During an isothermal process, 5.0 J of heat is removed from an ideal gas. What is the work done by the gas in the process?
A) 0 J
B) 5.0 J
C) -5.0 J
D) -10 J
Work done by the gas in an isothermal process where 5.0 J of heat is removed is -5.0 J (option C).
During an isothermal process, the temperature of the system remains constant.
In this scenario, 5.0 J of heat is removed from the ideal gas, meaning the internal energy of the gas decreases by 5.0 J. Since the temperature is constant, the change in internal energy is equal to the work done by the gas.
Therefore, the work done by the gas is -5.0 J, as work done on the system is considered positive and work done by the system is considered negative.
This matches option C in the given choices, making it the correct answer.
For more such questions on isothermal, click on:
https://brainly.com/question/17213398
#SPJ11
Two piano strings are supposed to be vibrating at 220 Hz , but a piano tuner hears three beats every 3.4 s when they are played together.
Part A
If one is vibrating at 220 Hz , what must be the frequency of the other (is there only one answer)?
Express your answer using four significant figures. If there is more than one answer, enter them in ascending order separated by commas.
Part B
By how much (in percent) must the tension be increased or decreased to bring them in tune?
Express your answer using two significant figures. If there is more than one answer, enter them in ascending order separated by commas.
The other string's frequency is 219.1 Hz or 220.9 Hz.
There are three beats every 3.4 seconds, which means there is 1 beat every (3.4/3) = 1.1333 seconds.
The beat frequency is the difference between the frequencies of the two strings, so we can calculate the beat frequency as 1/1.1333 = 0.8824 Hz.
Since the first string's frequency is 220 Hz, the other string's frequency can either be 220 + 0.8824 or 220 - 0.8824, giving us 219.1 Hz or 220.9 Hz.
Part B: The tension must be increased by 0.80% or decreased by 0.80%.
The frequency of a vibrating string is directly proportional to the square root of the tension. Let f1 = 220 Hz and f2 be the other string's frequency (either 219.1 Hz or 220.9 Hz). We can set up the equation:
f2 / f1 = sqrt(T2 / T1)
Solving for T2/T1 (the ratio of tensions), we get (f2/f1)^2. Plugging in f2 as either 219.1 Hz or 220.9 Hz, we find the tension ratio is 0.992 or 1.008. This means the tension must be increased by 0.80% (1.008 - 1) or decreased by 0.80% (1 - 0.992) to bring the strings in tune.
Summary:
The other string's frequency must be either 219.1 Hz or 220.9 Hz, and the tension must be increased or decreased by 0.80% to bring them in tune.
Learn more about frequency click here:
https://brainly.com/question/254161
#SPJ11
a light ray is incident from material 1 to material 2 and undergoes total internal reflection. if material 1 has an index of refraction of 1.2, which of the following are possibilities for the index of refraction of material 2? select all that apply. group of answer choices 1.5 1.0 1.4 1.2 0.9
The possibilities for the index of refraction of material 2 that allow for total internal reflection are 1.5, 1.4, and 1.2.
When a light ray passes from one medium to another, it undergoes refraction based on the difference in the indices of refraction of the two media. However, in the case of total internal reflection, the angle of incidence is greater than the critical angle and the light ray reflects back into the same medium instead of refracting into the second medium.
Now, if a light ray is incident from material 1 with an index of refraction of 1.2, and it undergoes total internal reflection, then the angle of incidence must be greater than the critical angle of material 1. This critical angle depends on the index of refraction of material 1 and the index of refraction of the second medium.
From the given options, we can see that the index of refraction of material 2 can be 1.5, 1.4, or 1.2, because for these values, the critical angle of material 1 is less than 90 degrees. However, if the index of refraction of material 2 is 1.0 or 0.9, the critical angle of material 1 will be greater than 90 degrees, and there will be no total internal reflection.
For more about internal reflection:
https://brainly.com/question/28231417
#SPJ11
a train travelled 240 km at a certain speed. when the engine was replaced by an improved model, the speed was increased by 20 km/hr and the travel time for the trip was decreased by 1 hr. what was the rate of each engine?
The initial engine's rate was 60 km/hr, and the improved engine's rate was 80 km/hr.
Let's call the rate of the first engine "x" km/hr. So, the train travelled 240 km at a speed of "x" km/hr.
When the engine was replaced by an improved model, the speed increased by 20 km/hr. So, the new speed is
"x + 20" km/hr.
We also know that the time for the trip was decreased by 1 hr. Let's call the original time "t" hours. So, we can write:
240/x = t
240/(x+20) = t-1
We can use these equations to solve for "x" and "x+20":
240/x = 240/(x+20) + 1
Multiplying both sides by "x(x+20)", we get:
240(x+20) = 240x + x(x+20)
240x + 4800 = 240x + x^2 + 20x
Simplifying, we get:
x^2 + 20x - 4800 = 0
Factoring, we get:
(x+80)(x-60) = 0
So, either x = -80 (which doesn't make sense in this context) or x = 60.
Therefore, the rate of the first engine was 60 km/hr, and the rate of the improved engine was 80 km/hr.
Let the initial speed of the train be x km/hr. The train traveled 240 km at this speed. The time taken for this trip can be represented as:
Time = Distance / Speed = 240 / x
With the improved engine, the speed increased by 20 km/hr. So, the new speed is (x + 20) km/hr. The time taken for the trip decreased by 1 hour. Therefore, the new time taken is:
(240 / x) - 1
At the new speed, we can write the time as:
Time = Distance / Speed = 240 / (x + 20)
Now, we have the equation:
(240 / x) - 1 = 240 / (x + 20)
To solve for x, first, get rid of the fractions by multiplying both sides by x(x + 20):
240(x + 20) - x(x + 20) = 240x
Now, expand and simplify the equation:
240x + 4800 - x^2 - 20x = 240x
Rearrange the equation to form a quadratic equation:
x^2 - 20x - 4800 = 0
Solve the quadratic equation using factoring or the quadratic formula. In this case, the two possible values for x are 60 and -80. Since speed cannot be negative, the initial speed of the train is 60 km/hr.
The rate of the improved engine is 20 km/hr faster, so the new speed is:
60 + 20 = 80 km/hr
Thus, the initial engine's rate was 60 km/hr, and the improved engine's rate was 80 km/hr.
To know more about rate of engine visit:
https://brainly.com/question/28994705
#SPJ11
Each item following is a characteristic of a one-solar-mass star either during its protostar phase or during its main-sequence phase. Match the items to the appropriate phase.
The characteristics of a one-solar-mass star to its protostar phase or main-sequence phase.1. Protostar phase, gas and dust are contracting under gravity.2. Main-sequence phase, hydrogen fusion occurs in the core.
Here are the characteristics matched to the appropriate phase:
1. Protostar phase:
- Gas and dust are contracting under gravity.
- The star's core is not hot enough to sustain nuclear fusion.
- The star is mainly powered by gravitational contraction.
- The object is surrounded by an accretion disk.
- Often found in molecular clouds or star-forming regions.
2. Main-sequence phase:
- Hydrogen fusion occurs in the core.
- The star is in hydrostatic equilibrium, balancing gravity and radiation pressure.
- The star has a stable luminosity and temperature.
- This phase lasts for billions of years, depending on the star's mass.
- The star is found on the main-sequence line on the Hertzsprung-Russell (H-R) diagram.
To know more about star visit:
https://brainly.com/question/31258649
#SPJ11
a thin hoop rolls smoothly from rest down a ramp. if it descends a vertical distance 20.0 cm, then what is its final speed in m/s? enter the number only. do not enter the units
Final speed of hoop rolling down a ramp can be calculated using conservation of energy, with the final speed being 1.98 m/s.
What is the final speed of a hoop rolling down a ramp if it descends a vertical distance of 20 cm?
The final speed of the hoop can be determined using conservation of energy. Initially, the hoop is at rest, so its initial kinetic energy is zero. At the bottom of the ramp, the hoop has potential energy due to its height above the ground. This potential energy is converted to kinetic energy as the hoop rolls down the ramp. Assuming no energy is lost due to friction, the initial potential energy of the hoop is equal to its final kinetic energy.
Using the equation for potential energy, U=mgh, where m is the mass of the hoop, g is the acceleration due to gravity, and h is the height the hoop descends, we can calculate the potential energy of the hoop. Since the hoop is thin, we can treat it as a ring with negligible mass, so m can be ignored. The potential energy of the hoop is then U = mgh = (0.2 kg)(9.8 m/s^2)(0.2 m) = 0.392 J.
The final kinetic energy of the hoop is equal to the initial potential energy, so KE = 0.392 J. Using the equation for kinetic energy, KE = (1/2)mv^2, we can solve for the final velocity of the hoop. Rearranging the equation and plugging in the values, we get v = sqrt(2KE/m) = sqrt(2(0.392 J)/(0.2 kg)) = 1.98 m/s. Therefore, the final speed of the hoop is 1.98 m/s.
To learn more about conservation of energy, visit: https://brainly.com/question/166559
#SPJ4
Do you believe that experiments should use animals? Always, sometimes, or never? Based on what you know about ethics, write a 150 word essay defending your opinion about the appropriateness of animal testing.(for psycology)
Based on what I know about ethics, I don't believe the use of animals in experiments for testing is appropriate.
Experimenting with animalsSince animals can feel pain and suffering, using them in studies creates ethical questions. Some contend that the advantages of using animals for research do not outweigh the harm done to the animals. Concerns exist over the efficacy of animal models as well as the applicability of results to people.
The appropriateness of animal testing in psychology research is a complicated matter that calls for comprehensive analysis of the advantages and disadvantages as well as any prospective substitute techniques. While attempting to advance our understanding of human psychology, researchers should emphasize the welfare of animals used in experiments and strive to reduce their suffering as much as possible.
Learn more on animal experiments here https://brainly.com/question/24249621
#SPJ1
23. Two blocks, of masses m1 and m2, are connected to each other and to a central post by cords. they rotate about the post at a frequency F (revolutions per second) on a frictionless horizontal surface at distances r1 and r2 from the post.
1)Derive an algebraic expression for the tension in each segment of the cord
The tension in each segment of the cord can be expressed as T1 = (m14π²r1F) / (4r1²+ r2²) and T2 = (m24π²r2F) / (r1² + 4r2²), where T1 is the tension in the cord connected to block m1, T2 is the tension in the cord connected to block m2, r1, and r2 are the distances from the central post to the blocks, and F is the frequency of rotation in revolutions per second.
To derive the algebraic expression for the tension in each segment of the cord, we can begin by considering the forces acting on each block. The tension in the cord connected to each block will be equal to the centripetal force required to keep the block moving in a circular path around the central post. By equating the tension to the centripetal force, we can derive the above expressions for T1 and T2 in terms of the masses of the blocks, the distances from the central post, and the frequency of rotation.
Learn more about The tension here:
https://brainly.com/question/14177858
#SPJ11
Suppose a star the size of our Sun, but of mass 8.0 times as great, was rotating at a speed of 1.0 revolution every 2 days. If it were to undergo gravitational collapse to a neutron star of radius 15 km, losing three quarters of its mass in the process, what would its rotation speed, in rev/day, be?
Assume that the star is a uniform sphere at all times and that the lost mass carries off no angular momentum.
According to the question for the initial star, the angular velocity is 1/2 revolution per day, or[tex]ω_old = 0.5 rev/day[/tex]. The new angular velocity is therefore 0.67 rev/day.
what is velocity?Velocity is a vector quantity that measure both the speed and direction of an object in motion. It is the rate of change of an object’s position over time and is usually expressed in terms of metres per second (m/s). It is the product of an object’s speed and direction. When an object’s velocity is changing, it is said to be accelerating. Acceleration can be due to a change in speed, direction, or both. Velocity is a fundamental concept in classical mechanics, which is the study of how objects move and interact.
The angular momentum of a rotating body is given by the equation [tex]L = Iω[/tex], where I is the body's moment of inertia and ω is the angular velocity. Since the mass of the star is multiplied by 8, its moment of inertia will also be multiplied by 8.
When the star collapses, it loses 3/4 of its mass, but the moment of inertia remains unchanged. This means that the angular momentum L will be reduced by a factor of 4/3.
The angular velocity ω is proportional to the angular momentum, so it will be reduced by the same factor:
[tex]ω_new = (4/3)ω_old[/tex]
For the initial star, the angular velocity is 1/2 revolution per day, or ω_old = 0.5 rev/day. The new angular velocity is therefore
[tex]ω_new = (4/3)(0.5) rev/day = 0.67 rev/day[/tex]
To learn more about velocity
https://brainly.com/question/80295
#SPJ4
a 5-kg block moving to the right has a completely inelastic collision with a 10-kg block that is initially at rest. after the collision the stuck-together blocks are moving to the right at 4 m/s
When two objects collide, momentum is conserved. In this case, the momentum of the 5-kg block before the collision is: P1 = m1v1 = 5 kg x (some velocity to the right)
The momentum of the 10-kg block before the collision is:
P2 = m2v2 = 0 kg x 0 m/s = 0
After the collision, the two blocks stick together and move to the right at a velocity of 4 m/s. Therefore, the momentum of the combined blocks after the collision is:
Pf = (m1 + m2)vf = 15 kg x 4 m/s = 60 kg m/s
Since momentum is conserved, we can set the initial momentum equal to the final momentum:
P1 + P2 = Pf
5 kg x (some velocity to the right) + 0 = 60 kg m/s
Solving for the initial velocity of the 5-kg block, we get:
(some velocity to the right) = 12 m/s
Therefore, the initial velocity of the 5-kg block before the collision was 12 m/s to the right.
we have a completely inelastic collision between a 5-kg block moving to the right and a 10-kg block initially at rest. After the collision, the stuck-together blocks have a combined mass of 15 kg and are moving to the right at 4 m/s.
To know more about collision visit:
https://brainly.com/question/29013438
#SPJ11
What fuel does a main-sequence star use for nuclear fusion?.
Throughout this fusion process, energy is released in the form of light and heat, which is what makes stars shine.
Main-sequence stars, like our sun, use hydrogen as their primary fuel for nuclear fusion. During fusion, hydrogen atoms are fused together to form helium, which releases a large amount of energy in the form of light and heat. This process is known as nuclear fusion, and it powers the sun and other main-sequence stars for billions of years. As the star ages and exhausts its hydrogen fuel, it will eventually begin to fuse heavier elements like helium and carbon, until it can no longer sustain fusion and ultimately runs out of fuel, leading to its eventual demise. Overall, hydrogen is the key fuel that drives the energy production of main-sequence stars.
In a main-sequence star, hydrogen nuclei (protons) undergo nuclear fusion to form helium. This process is called the proton-proton chain reaction, and it involves the following steps:
1. Two hydrogen nuclei (protons) collide and fuse, forming a deuterium nucleus and releasing a positron and a neutrino.
2. The deuterium nucleus then fuses with another hydrogen nucleus, creating a helium-3 nucleus and releasing a gamma-ray photon.
3. Finally, two helium-3 nuclei combine to form a helium-4 nucleus, releasing two hydrogen nuclei in the process.
Throughout this fusion process, energy is released in the form of light and heat, which is what makes stars shine.
Learn more about nuclear fusion here,
https://brainly.com/question/982293
#SPJ11
in the photoelectric effect, electrons are never emitted from a metal if the frequency of the incoming light is below a certain threshold value. part a why is this true?
The photoelectric effect refers to the emission of electrons from a metal surface when it is exposed to electromagnetic radiation, such as light. However, electrons are only emitted from the metal surface if the frequency of the incoming light is above a certain threshold value.
This is because the energy of a photon is directly proportional to its frequency, and only photons with sufficient energy can overcome the binding energy of the metal atoms and liberate electrons. If the frequency of the incoming light is below the threshold value, the energy of the photons is not enough to cause electron emission. Therefore, the electrons are never emitted from the metal if the frequency of the incoming light is below this threshold value.
In the photoelectric effect, electrons are emitted from a metal surface when it is exposed to light with a sufficient frequency. This is because the energy of the incoming light is directly proportional to its frequency. When the frequency of light is below a certain threshold value, its energy is not enough to overcome the binding energy of the electrons within the metal. As a result, the electrons cannot gain enough energy to be ejected from the metal surface. Therefore, it is essential for the light to have a frequency above the threshold value to initiate the photoelectric effect.
For more information on photoelectric effect visit:
brainly.com/question/26465043
#SPJ11
How does nuclear energy pose a threat to the environment and public health?.
The main answer to this question is that nuclear energy poses a threat to the environment and public health through the potential for accidents and nuclear waste.
Nuclear accidents such as the Chernobyl disaster in 1986 and the nuclear disaster in 2011 have had catastrophic consequences, including the release of radioactive materials into the environment and the exposure of people to harmful radiation. These incidents demonstrate the dangers of nuclear energy and highlight the potential for widespread environmental damage and harm to public health.
Additionally, nuclear power plants generate nuclear waste that remains dangerous for hundreds of thousands of years. This waste poses a significant risk to the environment and public health as it can leak into the soil and water, contaminating ecosystems and potentially causing cancer and other illnesses in humans and wildlife. The long-term storage and disposal of nuclear waste is a complex and expensive issue that has yet to be fully resolved.
Overall, while nuclear energy has the potential to generate significant amounts of electricity, it also poses a significant threat to the environment and public health due to the risks of accidents and nuclear waste.
To know more about Nuclear refer to
https://brainly.com/question/12841418
#SPJ11
a diver jumping east strikes the water with a force of 18 newtons at an angle of 78 degrees with the sruface of the water. find the component forces of her entry into the water
The component forces of the diver's entry into the water are: Horizontal force: -1.64 newtons (acting in the opposite direction to the eastward jump) , Vertical force: 17.89 newtons (acting downwards).
First, we need to identify the angle between the force and the horizontal plane. Since the diver jumps east and strikes the water at an angle of 78 degrees, we know that the angle between the force and the horizontal is 180 - 78 = 102 degrees.
To find the horizontal component of the force, we use the formula:
Horizontal component = force * cos(angle)
Horizontal component = 18 newtons * cos(102 degrees)
Horizontal component = -1.64 newtons (Note the negative sign indicates that the force is acting in the opposite direction to the eastward jump.)
To find the vertical component of the force, we use the formula:
Vertical component = force * sin(angle)
Vertical component = 18 newtons * sin(102 degrees)
Vertical component = 17.89 newtons
So, the component forces of the diver's entry into the water are:
Horizontal force: -1.64 newtons (acting in the opposite direction to the eastward jump)
Vertical force: 17.89 newtons (acting downwards)
To know more about component forces visit:-
https://brainly.com/question/15443509
#SPJ11
A 100 kg cart accelerates from 5 m/s to 10 m/s. Compare the cart's final kinetic energy to its initial kinetic energy.A. the same B. two times as great C. four times as great D. one-half as great
The cart's final kinetic energy is four times as great as its initial kinetic energy in joules.
The kinetic energy of an object is given by the formula KE = 1/2 mv^2, where m is the mass of the object and v is its velocity. The unit of kinetic energy is (J). The initial kinetic energy of the cart is KE1 = 1/2 (100 kg), where velocity is (5 m/s)^2 = 1250 J. The final kinetic energy of the cart is KE2 = 1/2 (100 kg)(10 m/s)^2 = 5000 J. Therefore, the final kinetic energy is four times as great as the initial kinetic energy.
To learn more about velocity, click here:
https://brainly.com/question/30559316
#SPJ11
We cannot see the milky way galaxy without binocular or telescopes.
That's correct! The milky way galaxy is a vast collection of stars, dust, and gas that spans across the night sky, but it's difficult to see with the eye due to the light pollution and atmospheric interference.
To get a better view, binoculars or telescopes are often used to help bring out the details and clarity of the milky way.
To answer your question about whether we cannot see the Milky Way galaxy without binoculars or telescopes:
It is actually possible to see the Milky Way galaxy with the eye, but binoculars and telescopes can greatly enhance the viewing experience. The visibility of the Milky Way depends on factors such as the level of light pollution in your area, the time of year, and the phase of the moon. In dark sky locations with minimal light pollution, you can see the Milky Way as a faint, milky band stretching across the sky. Binoculars and telescopes provide a closer view of individual stars, star clusters, and other celestial objects within the galaxy. So, while it is possible to see the Milky Way without binoculars or telescopes, these tools can significantly improve the view.
To know more about galaxy visit:
https://brainly.com/question/31361315
#SPJ11
8-13 a source of sound of frequency vo moves horizontally at constant speed u in the x direction at a distance h above the ground.an observer is situated on the ground at the point x=0;the source passes over this point at t=0. (a)show that the signal received at any time te at the ground was emitted by the source at an earlier time ts,such that
The signal received at any time te at the ground was emitted by the source at an earlier time ts is ts = te - (1/v) * (sqrt((x-u*te)^2 + h^2)).
To answer this question, we need to consider the speed of sound and the distance between the source and the observer. As the source moves horizontally at a constant speed, it emits sound waves that travel through the air at the speed of sound.
The time it takes for the sound waves to travel from the source to the observer is given by the equation:
t = (1/v) * (sqrt((x-u*t)^2 + h^2))
where t is the time it takes for the sound waves to reach the observer, v is the speed of sound, x is the position of the source, u is the speed of the source, and h is the height of the source above the ground.
We can rearrange this equation to solve for ts, the time at which the sound waves were emitted by the source:
ts = te - (1/v) * (sqrt((x-u*te)^2 + h^2))
This equation shows that the signal received at any time te at the ground was emitted by the source at an earlier time ts. This time delay is due to the time it takes for the sound waves to travel from the source to the observer. The distance between the source and the observer determines how long it takes for the sound waves to arrive, and this time delay can be calculated using the above equation.
For more about source:
https://brainly.com/question/11366069
#SPJ11
An object that is negatively charged could contain only electrons with no accompanying protons. O True False
The given statement is '' An object that is negatively charged could contain only electrons with no accompanying protons '' is false because
All electrons carry a negative charge and all protons carry a positive charge. An object that is negatively charged must have an excess of electrons compared to protons, but it will still contain protons. In fact, all ordinary matter consists of atoms that contain both protons and electrons (as well as neutrons). The number of electrons and protons in an atom is usually equal, so the overall charge of the atom is neutral. However, when electrons are added or removed from an atom, the resulting ion can be either positively or negatively charged. So, an object that is negatively charged must have gained extra electrons or lost some protons, but it will still contain protons.
However, the number of electrons will be greater than the number of protons, resulting in a net negative charge.
To know more about electrons here
https://brainly.com/question/26061019
#SPJ4
a copper cylinder has a mass of 76.8 g and a specific heat of 0.092 cal/g degree celsius. it is heated to 86.5 degrees celsius and then put in 68.7 g of turpentine whose temperature is 19.5 degrees celsius. the final temperature of the mixture is 31,9 degrees celsius. what is the total heat change for the copper, in calories?
Therefore, the total heat change for the copper cylinder is 426.03 calories.
To calculate the total heat change for the copper cylinder, we can use the formula:
Q = m * c * deltaT
where Q is the heat change, m is the mass of the object, c is the specific heat, and deltaT is the change in temperature.
First, we can calculate the heat change for the copper cylinder when it is heated from an initial temperature of T1 = 25 degrees Celsius to a final temperature of T2 = 86.5 degrees Celsius.
Q1 = m1 * c1 * deltaT1
where m1 is the mass of copper cylinder, c1 is the specific heat of copper, and deltaT1 is the temperature change of copper.
m1 = 76.8 g
c1 = 0.092 cal/g degree Celsius
deltaT1 = (86.5 - 25) degrees Celsius = 61.5 degrees Celsius
Substituting the values in the above formula, we get:
Q1 = (76.8 g) * (0.092 cal/g degree Celsius) * (61.5 degrees Celsius) = 426.03 cal
Next, we can calculate the heat change for the turpentine when it is heated from an initial temperature of T3 = 19.5 degrees Celsius to a final temperature of T2 = 31.9 degrees Celsius.
Q2 = m2 * c2 * deltaT2
where m2 is the mass of turpentine, c2 is the specific heat of turpentine, and deltaT2 is the temperature change of turpentine.
m2 = 68.7 g
c2 = 0.49 cal/g degree Celsius (specific heat of turpentine)
deltaT2 = (31.9 - 19.5) degrees Celsius = 12.4 degrees Celsius
Substituting the values in the above formula, we get:
Q2 = (68.7 g) * (0.49 cal/g degree Celsius) * (12.4 degrees Celsius) = 406.92 cal
Since heat lost by the copper is equal to heat gained by the turpentine,
Q1 = - Q2
Total heat change for the copper = Q1 = 426.03 cal (rounded to 3 significant figures)
To know more about total heat change,
https://brainly.com/question/28832382
#SPJ11
a 65.0 kg person throws a 0.0400 kg snowball forward with a ground speed of 35.0 m/s. a second person, with a mass of 58.0 kg, catches the snowball. both people are on skates. the first person is initially moving forward with a speed of 2.10 m/s, and the second person is initially at rest. what are the velocities of the two people after the snowball is exchanged? disregard the friction between the skates and the ice.
The velocities of the two people after the snowball is exchanged are 58.0 kg and 137.9 kg m/s.
What is snowball ?Snowball is a data collection service offered by Amazon Web Services (AWS). It is used to move large amounts of data into and out of AWS. It uses physical storage appliances to transfer data between AWS and on-premises locations, such as data centers or remote offices. The appliances are ruggedized to withstand extreme weather conditions, and use an encrypted hardware-based data transfer mechanism to securely move the data.
The momentum of the first person before the exchange is: Momentum = Mass * Velocity = 65.0 kg * 2.10 m/s = 136.5 kg m/s ,The momentum of the snowball before the exchange is: Momentum = Mass * Velocity = 0.0400 kg * 35.0 m/s = 1.40 kg m/s ,The total momentum before the exchange is: Total Momentum = 136.5 kg m/s + 1.40 kg m/s = 137.9 kg m/s ,The total momentum after the exchange is the same as before the exchange, so:
Total Momentum = 137.9 kg m/s ,The momentum of the first person after the exchange is: Momentum = Mass * Velocity = 65.0 kg * V₁ ,The momentum of the second person after the exchange is: Momentum = Mass * Velocity = 58.0 kg * V₂
Adding the two momentums together gives us:
65.0 kg * V₁ + 58.0 kg * V₂ = 137.9 kg m/s
To learn more about snowball
https://brainly.com/question/29558717
#SPJ4
4. examining the data obtained in step p3, does your reading of v indicate that the transmission filter reduced the number of photons striking the diode, lowered the energy of the photons, both, or neither? explain your conclusion
Therefore, based on the data obtained, it can be concluded that the transmission filter reduced the number of photons striking the diode, but did not affect the energy of the photons.
Based on the data obtained in step p3, it appears that the transmission filter has reduced the number of photons striking the diode. This is because the reading of V decreased when the transmission filter was introduced, indicating that fewer photons were reaching the diode. However, there is no evidence to suggest that the transmission filter lowered the energy of the photons. The reading of V did not show any significant change in energy levels, which suggests that the filter did not impact the energy of the photons. Therefore, based on the data obtained, it can be concluded that the transmission filter reduced the number of photons striking the diode, but did not affect the energy of the photons.
To know more about photon visit:
https://brainly.com/question/20912241
#SPJ11
What would be the Schwarzschild radius, in light years, if our Milky Way galaxy of 100 billion stars collapsed into a black hole? (Assume each star has the same mass as the sun.)
Compare this to our distance from the center, about 27,000 light years
The gravitational effects of such a massive object would likely have significant consequences for the structure and dynamics of the galaxy as a whole. The Schwarzschild radius is given by the formula:
r_s = 2GM / c²
where G is the gravitational constant, M is the mass of the object, and c is the speed of light.
If our Milky Way galaxy of 100 billion stars collapsed into a black hole, the total mass would be:
M = 100 billion × 2 × 10³⁰ kg = 2 × 10⁴¹ kg
Assuming each star has the same mass as the sun, we can find the mass of the galaxy as:
M = 100 billion × 1.99 × 10³⁰ kg = 1.99 × 10⁴¹ kg
Substituting the values into the formula for the Schwarzschild radius, we get:
r_s = 2 × 6.67 × 10⁻¹¹ m³ kg⁻¹ s⁻² × 1.99 × 10⁴¹ kg / (3 × 10⁸m/s)²
r_s = 5.9 × 10¹¹meters
Converting to light years, we get:
r_s = 62.5 light years
Therefore, if the Milky Way galaxy collapsed into a black hole, its Schwarzschild radius would be approximately 62.5 light years.
Comparing this to our distance from the center of the Milky Way, about 27,000 light years, we see that we would still be outside the event horizon of the black hole. However, the gravitational effects of such a massive object would likely have significant consequences for the structure and dynamics of the galaxy as a whole.
Learn more about “ gravitational effects “ visit here;
https://brainly.com/question/14433868
#SPJ4
What is unique about electromagnetic waves? Name several examples
Electromagnetic waves are unique because they are the only type of wave that can travel through a vacuum, such as space, without the need for a medium. There are many examples of electromagnetic waves, ranging from radio waves to gamma rays.
They are also transverse waves, which means that the oscillations of the wave are perpendicular to the direction of the wave's motion. Radio waves have the longest wavelength and are used in communication technology, such as radio and television broadcasting. Microwaves have a shorter wavelength and are used in microwave ovens and communication devices such as cell phones. Infrared waves are used in remote controls and thermal imaging. Visible light is the part of the electromagnetic spectrum that we can see and is responsible for all the colors we see around us. Ultraviolet waves can cause skin damage and are used in black lights. X-rays and gamma rays have the shortest wavelength and are used in medical imaging and cancer treatments. Overall, the unique properties of electromagnetic waves make them incredibly versatile and useful in a variety of applications in everyday life.
learn more about Electromagnetic waves Refer: https://brainly.com/question/29774932
#SPJ11
