Answer:
The coldness will move from the pan to the ice cube. ... Thermal energy moved from a cooler object to a warmer object through radiation.
Explanation:
In a first-order decomposition reaction. 58.6% of a compound decomposes in 11.7 min. How long (in min) does it take for 80.2% of the compound to decompose
Answer:
t = 21.5 min.
Explanation:
Hello!
In this case, since the kinetics of a first-order reaction is:
[tex]\frac{[A]}{[A]_0}=exp(-kt)[/tex]
Thus, since we are given the 11.7 min for a 58.6-% consumption, we can compute the rate constant, k:
[tex]ln(1-0.586)=-kt\\\\k=\frac{ln(0.414)}{-t}=\frac{-0.882}{11.7min}=0.0754min^{-1}[/tex]
Now, for the second problem, as the new consumption is 80.2%, we can compute the required time as shown below:
[tex]ln(1-0.802)=-kt\\\\t=\frac{ln(198)}{k} \\\\t=\frac{-1.62}{0.0754min^{-1}}\\\\t=21.5min[/tex]
Best regards!
An unknown element is a mixture of isotopes ¹²⁰X and ¹²²X. The average atomic mass of X is 120.59 amu. What is the percent abundance of ¹²²X?
Answer:
[tex]\%_{X-122}=29.5\%[/tex]
Explanation:
Hello!
In this case, since isotopes are atoms of the same element with equal number of protons and electrons but different atomic mass, we can write the equation used to compute the average atomic mass of the considered X:
[tex]m_X^{avr}=\%_{X-120}*120+\%_{X-122}*122[/tex]
However since both percentages compose the 100%, we can write one of those in terms of the other:
[tex]m_X^{avr} = (100\%-\%_{X-122})*120+\%_{X-122}*122[/tex]
Thus, we can solve for the percent abundance of X-122 as shown below:
[tex]120.59 = 120-\%_{X-122}*120+\%_{X-122}*122\\\\120.59-120=\%_{X-122}(122-1200)\\\\120.59-120=\%_{X-122}*2\\\\\%_{X-122}=\frac{0.59}{2}=29.5\%\\[/tex]
Thus the percent abundance of the other isotope would be 70.5 %.
Best regards!
9) All elements can be sorted into 3 simple groups:
O metals, meteors, meteorites
O metals, non-metals, metalloids
O medals, non-metals, meteorites
Answer: B) metals, non-metals, metalloids
An example of a metal is iron. A non-metal example is oxygen, which is a gas at STP (standard temperature and pressure).
A metalloid is a bit of a mix between a metal and non-metal element. It's sorta like an element that has both properties of metals and non-metals, or it's in a murky gray area. An example of a metalloid would be silicon.
How does the energy of the atoms in a hot cup of coffee compare to the energy of the atoms in a piece of ice?
The atoms in the cup of coffee have more energy.
The atoms in the cup of coffee have less energy.
The atoms in the cup of coffee have the same amount of energy.
Answer:
The atoms in the cup of coffee have more energy.
Explanation:
The difference between the hot cup of coffee and the piece of ice is their temperature. The hot cup of coffee has a higher temperature than the ice.
The relationship between the energy and temperature is a direct relationship. This means that higher temperature means higher kinetic energy and vice versa.
Since the hot cup of coffee has a higher temperature, it means it also have the highest amount of energy. The correct option is;
The atoms in the cup of coffee have more energy.
Which statements describe sedimentary rock? Check all that apply,
It comes from older rocks.
It forms from sediments.
It is one of the three main types of rocks.
It comes from materials that never existed before.
It can form from materials solidified from solutions,
Answer:
EDG 2020
Explanation:
It comes from older rocks,It forms from sediments,it is one of the main 3 rocks, con form from materials solidified from solution.
Answer:
It comes from older rocks.
It forms from sediments.
It is one of the three main types of rocks.
It can form from materials solidified from solutions,
Explanation:
What part of the plant is fertilized with pollen to produce seeds?
Leaf
Ovule pistil
Steam
Answer:
B. Ovule
Explanation:
pistil holds the stigma and the ovule
stem holds the flower
leaf is just a leaf
How many molecules of iodine are produced when 9.3×1026 molecules of chlorine gas react with lithium iodide?
__Cl2 + __LiI à __LiCl + __ I2
Answer:
[tex]9.3x10^{26}molec\ I_2[/tex]
Explanation:
Hello!
In this case, considering the balanced chemical reaction:
Cl₂ + 2LiI ⇒ 2LiCl + I₂
We can see there is a 1:1 mole ratio between the produced iodine and the used chlorine, thus, we infer that the number of molecules of iodine given those of chlorine turn out:
[tex]9.3x10^{26}molec\ Cl_2*\frac{6.022x10^{23}molec\ I_2}{6.022x10^{23}molec\ Cl_2} =9.3x10^{26}molec\ I_2[/tex]
Best regards!
Answer:
9.3 × 10²⁶ molecules of I₂
Explanation:
Step 1: Given data
Molecules of I₂: ?Molecules of Cl₂: 9.3 × 10²⁶ moleculesStep 2: Write the balanced single displacement reaction
Cl₂ + 2 LiI ⇒ 2 LiCl + I₂
Step 3: Calculate the molecules of I₂ produced from 9.3 × 10²⁶ molecules of Cl₂
According to the balanced equation, the molecular ratio of Cl₂ to I₂ is 1:1.
9.3 × 10²⁶ molecule Cl₂ × 1 molecule I₂/1 molecule Cl₂ = 9.3 × 10²⁶ molecule I₂
please help me :)
20 points + :)
Answer:
6. valence, 7. full outer shell, 8.8, 9.lose/gain, 10. share, 11. ionic, 12. covalent, 13. ions, 14, negative
Explanation:
Answer:
6)Valence
7)stability
8)2
9)transfer of
10)share
11)covalent
12)ionic
13)ion
14)negative
What is water in the form of a gas called?
Answer:
Vapor
Explanation:
Water can occur in three states: solid (ice), liquid, or gas (vapor). ... Water as a gas—vapor is always present in the air around us. You cannot see it. When you boil water, the water changes from a liquid to a gas or water vapor. As some of the water vapor cools, we see it as a small cloud called steam.
Water in the form of a gas is called water vapor. Water vapor refers to the gaseous form of water. It is created when liquid water evaporates or when solid ice sublimates directly into the gas phase
What is water in the form of a gas called?Water vapor is when water turns into gas. This happens when water turns into a gas without becoming a liquid first.
When water molecules get enough energy, their forces between each other become weaker, and they break away from the liquid phase to become water vapor in the gas phase. This happens at any temperature above the point where water turns into steam, which is 100 degrees Celsius (212 degrees Fahrenheit) when the air pressure is normal.
Read more about water here:
https://brainly.com/question/1313076
#SPJ6
How does E. Mulsion, celebrity food scientist, define a physical reaction and what examples does he give?
Incomplete question. However, I assumed you are referring to the comments made in the online animated video (Chemical and Physical changes) by celebrity food scientist E. Mulson.
Explanation:
Recall in the video animation that E. Mulson defines physical reaction as occurring when "molecules in a substance stay the same, both before and after".
An example he gave was that of an orange getting juiced, the molecules remain the same before juicing, and after.
How many moles of CO2 must dissolve in excess water to produce 12 moles of
H2CO3?
Answer:
12 moles of CO₂.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
CO₂ + H₂O —> H₂CO₃
From the balanced equation above,
1 mole of CO₂ dissolves in water to produce 1 mole of H₂CO₃.
Finally, we shall determine the number of moles of CO₂ that will dissolve in water to produce 12 moles of H₂CO₃. This can be obtained as follow:
From the balanced equation above,
1 mole of CO₂ dissolves in water to produce 1 mole of H₂CO₃.
Therefore, 12 moles of CO₂ will also dissolve in water to produce 12 moles of H₂CO₃.
Thus, 12 moles of CO₂ is required.
a 1.912 g samplw of calcium chloride is decomposed and found to contain 0.690 g of Ca and 1.222 g of Cl. Calculate the mass percent composition of Ca in calcium chloride
Answer:
36.09% is the mass percent composition of calcium in calcium chloride
Explanation:
Mass percent is defined as one hundred times the ratio between the mass of a compound (In this case, Calcium), and the total mass of the sample:
Mass Percent = Mass compound / Total mass of the sample × 100
Computing the values of the problem:
Mass Percent = 0.690g / 1.912g * 100
Mass percent =
36.09% is the mass percent composition of calcium in calcium chlorideWhich line of defense includes active immunity?
•first
•second
•third
•fourth
Hurry up please
Answer:
B is the answer.
Explanation:
Can i have Brainliest
A restaurant sells cheeseburgers for $5.00 and French fries for $3.00. An
equation that represents the number of cheeseburgers and French fries that can
be bought for $20.00 is 5x + 3y = 20. Rearrange the equation to solve for the
number of French fries. *
Answer:
x = (20 - 3y) / 5
Explanation:
Let
french fires be represented by = x
cheeseburgers be represented by = y
The equation is given as;
5x + 3y = 20.
Rearrange the equation to solve for the number of French fries.
This means we are to make french fries (x) the subject of equation
5x + 3y = 20
5x = 20 - 3y
x = (20 - 3y) / 5
A container of carbon dioxide has a volume of 220.0 cm3 at a temperature of 26.0 °C. If the pressure remains constant, what is the volume at 47.0 °C?
Answer:
235.45 cm³
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 220 cm³
Initial temperature (T₁) = 26 °C
Final temperature (T₂) = 47 °C
Pressure = constant
Final volume (V₂) =?
Next, we shall convert celsius temperature to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T₁) = 26 °C
Initial temperature (T₁) = 26 °C + 273
Initial temperature (T₁) = 299 K
Final temperature (T₂) = 47 °C
Final temperature (T₂) = 47 °C + 273
Final temperature (T₂) = 320 K
Finally, we shall determine the volume (i.e V₂) at 47 °C as follow:
Initial volume (V₁) = 220 cm³
Initial temperature (T₁) = 299 K
Final temperature (T₂) = 320 K
Final volume (V₂) =?
V₁ / T₁ = V₂ / T₂
220 / 299 = V₂ / 320
Cross multiply
299 × V₂ = 220 × 320
299 × V₂ = 70400
Divide both side by 299
V₂ = 70400 / 299
V₂ = 235.45 cm³
Thus, the volume at 47 °C is 235.45 cm³
A metal cube has an edge that is 11.4 mm long and a mass of 6.67 g. Calculate the density of the metal and determine the likely identity of the metal.
Answer:
d = 4.5 g/cm³
Metal cube is made up off titanium.
Explanation:
Given data:
Edge length of cube = a = 11.4 mm
Mass of metal cube = 6.67 g
Density and identity of metal = ?
Solution:
First of all we will calculate the volume of cube.
V = a³
V = (11.4mm)³
V = 1481.54 mm³
mm³ to cm³:
1481.54 mm³× 1 cm³/ 1000 mm³
1.482 cm³
Density:
d = m/v
d = 6.67 g/ 1.482 cm³
d = 4.5 g/cm³
Metal cube is made up off titanium because density of titanium is 4.5 g/cm³.
After passing, it is important to always follow through. T/F
False
True
2.
Which is not a component of throwing?
muscle
follow through
balance
hand eye coordination
3.
Which is NOT a type of basketball pass?
shoulder pass
chest pass
overhead pass
bounce pass
4.
Passing does not require hand eye coordination. T/F
False
True
5.
Which sport does not require passing or throwing?
Football
Basketball
Tennis
Baseball
Answer:
t
Explanation:
if a solid dissolves into a liquid, what does it mean about the properties of its molecules? Describe what it would look like on the nanoscale.
Polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore, when any solute dissolves in a solvent, then the nature of solute and solvent is same.
What is solubility?Solubility shows the extent of solubility of a solute in solvent to make a solution. Solute is substances that is present in small amount. solvent is a substance that is present in large amount. Its SI unit is gram per litre or g/L.
Bond strength affect the solubility of a solute in solvent. weaker the bond strength is, more the solubility is. The weaker bond can be easily broken by water molecule.
Polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. when any solute dissolves in a solvent, then the nature of solute and solvent is same.
Therefore, when any solute dissolves in a solvent, then the nature of solute and solvent is same.
To know more about solubility, here:
https://brainly.com/question/16191271
#SPJ5
What is the
Electronegativity of sugar
The electronegativity of sugar molecule is the the ability of an atom to attract an electron pair towards itself which is shared with another atom in a chemical bond.
What is electronegativity?Electronegativity is defined as the ability of an atom to attract an electron pair towards itself when share an electron or electrons with another atom in a chemical bond.
This electronegativity occurs between the atoms which made covalent bond with one another. Sugars also contain covalent bonds because all the covalent bonds in sugar molecules arise as a result of electron sharing between the atoms.
Learn more about covalent bond here: https://brainly.com/question/12732708
Explain why radiocarbon dating is not 100% accurate. What are the sources of some of this inaccuracy?
Answer:
Radiocarbon dating is a method used for knowing the exact age of a fossil.
Explanation:
Radiocarbon dating is a fundamental tool for archaeologists use to determine the age of objects. According to new research, it's shown that radiocarbon dating standards cannot always accurate. The reason for it lies in the climatic condition of that particular area. Variations in the radiocarbon affected cite in the Levant region like Israel, Egypt, and Jordan.
I Need help ASAP
An unknown element is a mixture of isotopes ¹²⁰X and ¹²²X. The average atomic mass of X is 120.59 amu. What is the percent abundance of ¹²²X?
Answer:
242X
I HOPE I'M CORRECT THANKS
A chemist adds of a aluminum chloride solution to a flask. Calculate the mass in grams of aluminum chloride the chemist has added to the flask. Be sure your answer has the correct number of significant digits.
The given question is incomplete. The complete question is:
A chemist adds 95.0 ml of a 1.5M aluminum chloride solution to a flask. Calculate the mass in grams of aluminum chloride the chemist has added to the flask. Be sure your answer has the correct number of significant digits.
Answer: 19.0 grams
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in ml
moles of [tex]AlCl_3[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{xg}{133.34g/mol}[/tex]
Now put all the given values in the formula of molarity, we get
[tex]1.5=\frac{x\times 1000}{95.0\times 133.34}[/tex]
[tex]x=19.0g[/tex]
Therefore, the mass in grams of aluminum chloride the chemist has added to the flask is 19.0
Sir Isaac Newton's only discovery was the three laws of motion
Answer:
No.
Explanation:
He also created a telescope and formula for universal gravity.
___Al + ____O2 → ____Al2O3
Answer:
4,3,2
Explanation:
HOPE THIS HELPS
A 8.00 L tank at 26.9 C is filled with 5.53 g of dinitrogen difluoride gas and 17.3 g of sulfur hexafluoride gas. You can assume both gases behave as ideal gases under these conditions. Calculate the mole fraction of each gas. Round each of your answers to significant digits.
Answer:
[tex]x_{N_2F_2}= 0.415\\\\x_{SF_6}=0.585[/tex]
Explanation:
Hello!
In this case, since the mole fraction of both gases in the tank is computed via:
[tex]x_{N_2F_2}=\frac{n_{N_2F_2}}{n_{N_2F_2}+n_{SF_6}} \\\\x_{SF_6}=\frac{n_{SF_6}}{n_{N_2F_2}+n_{SF_6}}[/tex]
It means we need to compute the moles of each gas, just as it is shown down below:
[tex]n_{N_2F_2}}=5.53gN_2F_2*\frac{1molN_2F_2}{66.01gN_2F_2} =0.0838molN_2F_2\\\\n_{SF_6}=17.3gSF_6*\frac{1molSF_6}{146.06gSF_6} =0.118molSF_6[/tex]
Thus, the mole fractions turn out:
[tex]x_{N_2F_2}=\frac{0.0838mol}{0.0838mol+0.118mol}= 0.415\\\\x_{SF_6}=\frac{0.0838mol}{0.0838mol+0.0838mol}=0.585[/tex]
Best regards!
What are the 3 known forms of hydrogen called
Answer:hydrogen, deuterium, and tritium.
Explanation:
What kinds of minerals do you think are in a cell phone?
Answer:
Most likely phosphorus, antimony, arsenic, boron, indium or gallium. The wiring is composed mainly of copper, gold, and silver.
The great French chemist Antoine Lavoisier discovered the Law of Conservation of Mass in part by doing a famous experiment in 1775. In this experiment Lavoisier found that mercury(II) oxide, when heated, decomposed into liquid mercury and an invisible and previously unknown substance: oxygen gas.
Required:
a. Write a balanced chemical equation, including physical state symbols, decomposition of solild mercurytl) oxide (HgO) into liquid mercury and gaseous dioxygen.
b. Suppose 73.0 mL. of dioxygen gas are produced by this reaction, at a temperature of 130.0 °C and pressure of exactly 1 atm. Calculate the mass of mercury() oxide that must have reacted.
Answer:
a. 2 HgO(s) ⇒ 2 Hg(l) + O₂(g)
b. 0.957 g
Explanation:
Step 1: Write the balanced equation
2 HgO(s) ⇒ 2 Hg(l) + O₂(g)
Step 2: Convert 130.0 °C to Kelvin
We will use the following expression.
K = °C + 273.15
K = 130.0°C + 273.15
K = 403.2 K
Step 3: Calculate the moles of O₂
We will use the ideal gas equation.
P × V = n × R × T
n = P × V/R × T
n = 1 atm × 0.0730 L/0.0821 atm.L/mol.K × 403.2 K
n = 2.21 × 10⁻³ mol
Step 4: Calculate the moles of HgO that produced 2.21 × 10⁻³ moles of O₂
The molar ratio of HgO to O₂ is 2:1. The moles of HgO required are 2/1 × 2.21 × 10⁻³ mol = 4.42 × 10⁻³ mol.
Step 5: Calculate the mass corresponding to 4.42 × 10⁻³ moles of HgO
The molar mass of HgO is 216.59 g/mol.
4.42 × 10⁻³ mol × 216.59 g/mol = 0.957 g
In photosynthesis, plants convert what type of energy into what other type of energy? please help
Answer:
Photosynthesis, the process by which green plants and certain other organisms transform light energy into chemical energy. During photosynthesis in green plants, light energy is captured and used to convert water, carbon dioxide, and minerals into oxygen and energy-rich organic compounds.
3. How much force does a 15 kg baby have that is crawling through the house at an acceleration of 12 m/s2? *
Answer:
15×12=180
Explanation:
Force=Mass ×Acceleration
