An ideal gas is in a sealed container. By what factor does the gas temperature change if the volume is halved and the pressure is tripled?.

Answers

Answer 1

The gas temperature change if the volume is halved and the pressure is tripled by factor 6.

What is an ideal gas?

An ideal gas is theoretical gas composed of many randomly moving point particles that are not subject to interparticle interactions. The ideal gas concept is useful because it obeys ideal gas law, a simplified equation of state, and is amenable to analysis under statistical mechanics.

Considering combined law equation:

Temperature increases by factor of 6.

Gay-Lussac's Law

Gay-Lussac's Law indicates that, as long as volume of the container containing the gas is constant, as the temperature increases, the gas molecules move faster. Then number of shocks against the walls increases, that is, the pressure increases. That is, gas pressure is directly proportional to its temperature.

In summary, when there is constant volume, as the temperature increases, the gas pressure increases. And when temperature decreases, gas pressure decreases.

Gay-Lussac's law can be expressed as mathematically as follows:

where:

P= pressure

T= temperature

k= Constant

Boyle's Law

Pressure and volume are related by Boyle's law, which says that volume occupied by a given mass of gas at constant temperature is inversely proportional to pressure.

Boyle's law is expressed mathematically as follows:

P× V=k

where:

P= pressure

V= volume

k= Constant

Charles's Law

Finally, Charles's Law consists of the relationship that exists between the volume and the temperature of certain amount of ideal gas, which is maintained at a constant pressure.

This law says that for given sum of gas at constant pressure, as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. That is, volume is directly proportional to the temperature of the gas.

In summary, Charles' law is a law that says that when amount of gas and pressure are kept constant, the ratio between volume and temperature will always have the same value:

where:

V= volume

T= temperature

k= Constant

Combined law equation

Combined law equation is combination of three gas laws called Boyle's, Charlie's and Gay-Lussac's law:

Studying the two different states, an initial state 1 and an final state 2, the following will be true:

In this case, you know that:

Volume is double: V2= 2×V1

Pressure is tripled: P2= 3×P1

So, replacing in combined law equation:

Solving:

T2= 6×T1

Finally, temperature increases by a factor of 6.

To know more about temperature visit: brainly.com/question/11464844

#SPJ4


Related Questions

I need help with this ASAP.. I have to get it done right now
. It is pass due

Answers

The map of the world temperature zones gives;

23. Zone A = The North Frigid zone

Zone B = The North Temperate zone

Zone C = The Torrid

Zone D = The South Temperate zone

Zone E = The South Frigid zone

24. Zone C, the Torrid zone

25. Zone C, the Torrid zone

26. The Torrid zone

What are the temperature zones?

23. The five temperature zones of the world based on the annual temperatures are;

The north frigid zone

The north temperate zone

The torrid zone (tropics)

The south temperate zone

The south frigid zone

Each of the five zones shown on the map are;

Zone A = The North Frigid zone

Zone B = The North Temperate zone

Zone C = The Torrid zone Tropics

Zone D = The South Temperate zone

Zone E = The South Frigid zone

24. The name of the temperature zone that includes the equator is; Zone C, the Torrid zone (The tropics).

The Equator is located around the horizontal line that runs around the center of the Earth at 0 ° latitude.

25. The zone that has the greatest amount of human habitable land mass is; Zone C, the Torrid zone, which covers 40% of the geographic surface of the Earth.

26. The zone that has the highest temperature all year round is the zone farthest from the north and south Frigid zone which is the Torrid zone

Learn more about the temperature zones of the Earth here:

https://brainly.com/question/12069219

#SPJ1

Answer:

the answer is A.

Explanation:

electricity consumption, cost and environmental impact of electricity provision at local, national and global scale.

Answers

The environmental problems directly related to energy production and consumption include air pollution, climate change, water pollution, thermal pollution, and solid waste disposal. The emission of air pollutants from fossil fuel combustion is the major cause of urban air pollution.

Any substance (solid, liquid, or gas) or energy can cause pollution (such as radioactivity, heat, sound, or light). Both naturally occurring contaminants and imported substances/energies can be considered pollutants, which are the elements of pollution. Despite the fact that natural disasters can result in environmental contamination, the word pollution often suggests that the toxins came from an artificial source, or a source made possible by human activity. Point source and nonpoint source pollution are two common categories of pollution.

To learn more about pollution refer to the link:

brainly.com/question/23857736

#SPJ9

The magnitude of f is 232 newtons and it points at 184o measured counterclockwise from the positive x-axis. what is the y component (in newtons) of f?

Answers

By the vector, the force in the y component is  -16.18 newtons.

We need to know about vectors to solve this problem. Vector has magnitude and also direction. Force is included in the vector. It can be written as

F = Fx i + Fy j + Fz k

where s is displacement, Fx is force on x-axis, Fy is displacement on y-axis and Fz is displacement on z-axis.

From the question above, we know that

|F| = 232 N

θ = 184⁰

The force on y-axis is

Fy = |F| . sin(θ)

Fy = 232 . sin(184)

Fy = -16.18 newtons

The negative force is caused by the direction of the force.

Find more on vector at: https://brainly.com/question/25811261

#SPJ4

In the figure below the card Is flicked with a push . It was observed that the card moves ahead while coin falls in glass

Answers

The cards are observed to move forward as the coins gel in the jar. This happens because the coin has rest inertia. Rest inertia is the resistance that an object exerts at rest. resist change and fall into the glass.

Coins have inertia. If you move the card slowly, it won't be fast enough to overcome this force. With a quick flick, the coin stays in one place and falls into the cup. A stationary object remains stationary. You could change position and fall to the ground or be inside the glass. This is because the paper changes its position when a strong force is applied or a quick pull is applied.

The law of inertia, also known as Newton's first law, states in physics that if an object is at rest or moving in a straight line with a constant velocity, it is at rest or moving in a straight line with a constant velocity. We assume that This is when a force is applied.

Learn more about Inertia here https://brainly.com/question/1140505

#SPJ1

Between coconut and husk which one will have the highest density?

Answers

Answer:

I think the answer is coconut

Explanation:

please make my answer as brainelist

object tendency to resist change

Answers

This answer should be true

The ph of a 0.60 m aqueous solution of formic acid is 1.98. what is the ka for formic acid?

Answers

The ph of  a 0.60 m aqueous solution of formic acid is 1.98 then the [tex]K_a[/tex] for formic acid will be 1.86×[tex]10^{-4}[/tex].

What is an Aqueous solution?

Any solution where the solvent is water (H2O) is referred to as an aqueous solution. When a species' name appears in a chemical equation, the symbol (aq) is used to denote that the species is in an aqueous solution.

Despite being frequently referred to as the universal solvent, only hydrophilic compounds dissolve in water. Acids, bases, and many salts are examples of hydrophilic molecules. Hydrophobic substances tend to not form aqueous solutions and do not dissolve well in water. Several organic compounds, such as fats and oils, are examples.

According to the question,

HCOOH ⇄ [tex]H^{+}[/tex] + [tex]HCOO^{-}[/tex]

[[tex]H^{+}[/tex]] [tex]10^{-1.98}[/tex]

=0.0104713

Now,

I     0.60                 0              0

C    -x                    +x            +x

E    0.60-x              x              x

[tex]K_a[/tex]= x²/(0.60-x)

Here,

x=0.0104713

[tex]K_a[/tex]=(0.0104713)²/(0.60-0.0104713)

[tex]K_a[/tex]=1.86×[tex]10^{-4}[/tex]

Hence, the [tex]K_a[/tex]  for formic acid will be 1.86×[tex]10^{-4}[/tex].

To get more information about aqueous solution :

https://brainly.com/question/14097392

#SPJ4

Find a vector equation for the tangent line to the curve of intersection of the cylinders x^2 y^2=5 and at the point . answer

Answers

Literally, it meant that the circle formed by x² + y² = 25 "contains" the curve. C is more specifically located on the 5 radian cylinder's edge.

The circle x²+y²=25 makes up each bend of the cylinder, as you can see.

The cylinder has two key characteristics, namely surface area and volume because it is a three-dimensional form. The combined curved surface of the cylinder and the areas of the two rotating bases make up its whole contact area.

A cylinder's volume is the term used to describe the three-dimensional space it takes up.

On the cylinder's 5 radian edge, C is located.

Learn more about cylinder here

https://brainly.com/question/9554871

#SPJ4

What is the peak current through a 590 w room heater that operates on 220 v ac power?

Answers

The peak current through a 590 w room heater that operates on 220 v ac power is 5.86 A.

Description

The largest amount of current that an output is capable of providing for brief periods of time is known as the peak current.

When an electrical device or power source is turned on for the first time, a large initial current known as the peak current flows into the load, starting at zero and increasing until it reaches a peak value.

How is peak current determined?

For instance, the connection between RMS and Peak Current is as follows when the AC waveform is a perfect sine wave.

RMS Current is equal to Peak Current times 0.70 or Peak Current times 1.41.

The peak current or the RMS current?

An alternating current can be expressed using two numbers: RMS and peak. RMS and Peak differ most when it comes to peak.

Calculation

Here on we have

P = 500 W

V = 120V

Then according to the expression for current,

I = P/V

= 500W/ 120V

= 4.16A

Then for peak current is,

Imax = [tex]\sqrt{}[/tex]2I

= (1.41) (4.16A)

= 5.86A

To know more about peak current visit:

https://brainly.com/question/28169133

#SPJ4

What kingdoms fall under archaea ?

Answers

The domain Archaea corresponds to the kingdom Archaebacteria.

Gravity pulled three toy cars of different masses down an inclined ramp. The toy cars hit a bumper at the bottom of the ramp.


What is the ratio of the masses of the toy cars?


1:2:3 1:3:6 1:6:12 1:9:18

Answers

The ratio of the masses of the toy cars is 1 : 3 : 6.

Effect of gravity on masses

When the mass of object increases, the force of gravitational attraction between them also increases.

Ratio of the masses of the toy cars

The ratio of the masses of the toy cars is calculated as follows;

Ratio of masses = 0.3 kg/0.3 kg :  0.9 kg/0.3kg :  1.8 kg/0.3 kg

Ratio of masses = 1 : 3 : 6

Thus, the ratio of the masses of the toy cars is 1 : 3 : 6.

Learn more about effect of gravity on masses here: https://brainly.com/question/25624188

#SPJ1

Find the sum of the forces

200N <————————-> 160N

Answers

The sum of the forces F[1] = 200 N and F[2] = 160 N acting opposite to each other in vector form is 40 [tex]a_{x}[/tex] along the negative x - direction.

We have two forces of 200 N and 160 N acting opposite to each other.

We have to determine their sum.

What is Force?

Force is the product mass and acceleration of a body. Mathematically -

F = m x a

According to the question -

We have two forces represented by two vectors having angle of 180 degrees between them. The mathematical representation of these vectors is shown below -

F[1] = + 160 [tex]a_{x}[/tex].   [along the positive x - axis].

F[2] = - 200 [tex]a_{x}[/tex].   [along the negative x - axis].

Now, the sum of the forces will be -

F(N) = F[1] + F[2] =  160 [tex]a_{x}[/tex] + (- 200 [tex]a_{x}[/tex]) = - 40 [tex]a_{x}[/tex]

Hence, the sum of the forces is 40 [tex]a_{x}[/tex] along the negative x - direction.

To solve more questions on Forces, visit the link below-

https://brainly.com/question/8850735

#SPJ1

2) In a computer simulation, Jeffrey moves a magnet (Magnet 2) toward
another magnet (Magnet 1) that cannot move. What happens to the
potential energy in the system of magnets?

Answers

In a computer simulation, Jeffrey moves a magnet (Magnet 2) toward the another magnet (Magnet 1) that cannot move. The potential energy in the system of magnets increases because Magnet 2 moves against the magnetic force.

What do you mean by potential energy?

In physics, potential energy is the energy held by an object because of its position relative to other objects, stresses within itself, its electric charge, or the other factors.

Common types of the potential energy include the gravitational potential energy of an object, the elastic potential energy of an extended spring, and the electric potential energy of an electric charge in an electric field. The unit for energy in the International System of Units (SI) is joule, which has the symbol J.

Potential energy is associated with the forces that act on a body in a way that the total work done by these forces on the body depends only on the initial and the final positions of the body in space. These forces, that are called the conservative forces, can be represented at every point in space by vectors expressed as the gradients of a certain scalar function called potential.

To know more about potential energy visit: https://brainly.com/question/24284560

#SPJ9

If the net torque acting on the ruler from the example was positive instead of zero, what would this say about the angular acceleration? what would happen to the ruler over time?

Answers

As total torque is positive . That means it will not be in state of rotational equilibrium . So it will rotate about its centre of mass. Net torque will produce angular acceleration

What is angular acceleration?

Angular acceleration, moreover called rotational acceleration, could be a quantitative expression of the change in precise velocity that a spinning object undergoes per unit time. It may be a vector quantity, comprising of a magnitude component and either of two characterized directions or senses. The size, or length, of the angular acceleration vector is specifically relative to the rate of change of precise speed, and is measured in radian s per moment squared (rad/s 2 or rad · s -2 ). Then again, the precise acceleration magnitude can be communicated in degrees per moment squared (deg/s 2 or deg · s -2 ).

The direction of the angular acceleration vector is opposite to the plane in which the turn takes put. In case the increment in angular speed shows up clockwise with regard to an observer, at that point the precise increasing speed vector focuses absent from the spectator. In case the increment in angular speed shows up counter clockwise, at that point the precise increasing speed vector focuses toward the eyewitness.

To learn more about, angular acceleration, visit;

https://brainly.com/question/15311727

#SPJ4

A person walks forwards 3 steps in 1 second. Then, the person walks backwards 3 steps in 1 second. Sketch the position-time graph for his movement.

1 What was his distance travelled?

2What was his displacement?

please with your graph

Answers

Answer:

Traveled = 6 steps     displacement = 0    

Explanation:

see attached 'sketch'

Two identically charged particles separated by a distance of 1.00 m repel each other force 1.00 n. what is the magnitude of the charges

Answers

By using electrostatic force, the charge is 1.05 x 10¯⁵ C..

We need to know about electrostatic force to solve this problem. The electrostatic force is a force caused by two charges separated at a distance. It can be determined as

F = k . Q1 . Q2 / r²

where F is force, k is coulomb's constant (9 x 10⁹ Nm²/C²), Q is charge and r is radius.

From the question above, we know that

Q1 = Q2 =Q

r = 1 m

F = 1 N

By using the equation, we can calculate the charge

F = k . Q1 . Q2 / r²

1 = 9 x 10⁹ . Q . Q / 1²

Q² = 1/(9 x 10⁹)

Q = 1.05 x 10¯⁵ C

Hence, the charge is 1.05 x 10¯⁵ C.

Find more on electrostatic force at: https://brainly.com/question/17692887

#SPJ4

Using the rydberg equation, calculate the wavelength (in meters) of the light absorbed by a hydrogen atom when n jumps from 3 to 5.

Answers

The wavelength released in transition energy is 683.68 nm.

We need to know about transition energy to solve this problem. Electrons in a hydrogen atom can move to another level of energy. It is also called a transition. In this process, electrons will absorb or release their energy to move. The transition energy can be determined as

ΔE = E2 - E1

where ΔE is transition energy, E2 is the final state of energy and E1 is the initial state of energy.

The state energy of a hydrogen atom can be calculated by

E = -(13.6) / n² eV

E = h.c / λ

where n is the number of energy states, h is Planck constant (4.136 x 10¯¹⁵ eV/Hz), c is speed of light (3 x 10⁸ m/s) and λ is wavelength.

Rydberg has been simplified how much wavelength released or absorbed by this equation

1/λ = R (1/n1 - 1/n2)

where R is Rydberg constant (1.097 × 10⁷ /m)

From the question above, we know that

n1 = 3

n2 = 5

By substituting the following parameter, we get

1/λ = R (1/n1 - 1/n2)

1/λ = 1.097 x 10⁷(1/3 - 1/5)

1/λ = 146266.67

λ = 6.8368 x 10¯⁷ m

λ = 683.68 nm

For more on transition energy at: https://brainly.com/question/19054395

#SPJ4

What do you feel is the most important aspect of measurement that staffing professionals need to know?

Answers

Measurement refers to the strategy that's utilized to relegate a number to a specific parameter / indicator / characteristics of an article that's assist utilized to compare with other measured numbers. For example, measurement of inflation is done as a rate alter in cost. Here, inflation may be a macroeconomic pointer. Assist, current expansion can be compared with the past. Similarly, efficiency of an worker is also measure in terms of unit / quality created in a given time period. Further, it is utilized to compare with standard productivity level.

Each estimation gives numerical result and numerical result of estimation changes with the sort of estimation and information. For example, estimation of area gives information in square meter or square feet. But, estimation of GDP provide the information in terms of Million / Billion or Trillion. Hence, with the change of information types, measurement unit changes. For exactness and standardization of comes about, standard units of estimation are settled and practiced over the globe.

Representation of information figures as a portion of estimation can moreover be done in:

Table form

Charts

Graphical representation

Above representation helps in comparative analysis.

Types of information can too be:

Discrete

According to the information sorts, suitable estimation procedure is adopted. Staffing Experts need to know the appropriate estimation strategy to degree the execution of workers against the benchmark standards. They ought to too know the measurement of credentials of potential recruits. It is their ethical obligation to select as it were those who can convey the leading comes about for the company. It can as it were be done through proper measurement. Client Company contracts staffing Experts to bring in able initiates to the company. Presently, it is the ethical obligation of Staffing Experts to degree the candidates without any bias / prejudice.

To more about staffing professionals, visit;

https://brainly.com/question/17209210

#SPJ4


2) A girl walks to the east 40m, to the south 70m and then to
the west 40m, what is the distance.
and displacement of the girl

Answers

The correct answer is 70 meter displacement in the east.

Let's assume that he departs from point O and follows the path ABC.

The man's displacement will be revealed if we join the start and end points of the path he took.

O's distance from A is 40 meters.

70 meters separate A and B.

From B to C, it is 40 meters.

Distance from B to C equals the distance between O and A.

We're looking for the displacement, which is the separation between points O and C.

The opposing sides of a rectangle are equal. Hence A to B is separated by the distance from O to C.

Distance from A to B equals displacement.

70 meter displacement in the east.

To learn more about displacement refer the link:

https://brainly.com/question/11934397

#SPJ9

A 9.4-kw electric resistance heater in a room is turned on and kept on for 36 min. the amount of electric energy (round to nearest 1 kj) used is?

Answers

By using power, the electric energy is 20304 kJ.

We need to know about power to solve this problem. Power is the energy dissipated because of resistance. The magnitude of power is proportional to current and voltage. It can be determined as

P = I . V

where P is power, I is current and V is voltage.

The electric energy can be calculated by this equation

W = P . t

where W is electric energy and t is time

From the question above, we know that

P = 9.4 kW = 9.4 x 10³ W

t = 36 min = 2160 seconds

By substituting the following parameters, we get

W = P . t

W = 9.4 x 10³ . 2160

W = 20304 x 10³ joules

W = 20304 kJ

Find more on power at: https://brainly.com/question/1634438

#SPJ4

Which model of the fate of the universe, if correct, is most likely to predict a second Big Bang?

A. Cosmological Model
B. Open Universe Model
C. Atomic Theory Model
D. Closed Universe Model​

Answers

Option D) is the correct answer. The Closed Universe model of the fate of the universe, if correct, is most likely to predict a second Big Bang.

The Closed Universe Model describes a hypothetically ever-expanding universe that contains a sufficient amount of matter in it a so that the gravitational pull due to the stored mass is enough to reverse the observable expansion of the universe through its gravitational contraction.

It is predicted that according to this model, the closed universe will folds back on itself like a saddle.

This could result in a second Big Bang.

According to Albert Einstein, the general shape of the universe depends upon the average density of matter and energy in the universe. For a closed universe, the ratio of average density to critical density ( for which the universe is flat) is more than one.

Hence, the Closed Universe Model is most likely to predict a second Big Bang.

LEARN MORE ABOUT UNIVERSE MODELS HERE:

https://brainly.com/question/964707

#SPJ9

The moon takes roughly 28 days to complete one orbit around earth. If the orbital radius of the moon were twice its actual value, its orbital period would be.

Answers

If the orbital radius of the moon were twice its actual value, the orbital period would be approximately 79 days.

The motion of planets and their satellites is governed by Kepler’s Laws.

Kepler’s Laws are as follows:

Law of OrbitsLaw of AreasLaw of Periods

According to the law of periods, the square of the time period of a body revolving around another body is proportional to the cube of the distance between the two bodies

The above statement is given by the following formula

T^2 ∝ R^3

Putting T1 = 28 days , T2 = x and R2 = 2R1

T1/T2 =(R1/R2)^3

28/x = (1/2)^3

x = 79 days.

Thus, If the orbital radius of the moon were twice its actual value, the orbital period would be approximately 79 days.

To know more about "Kepler's Laws", refer to the link given below:

https://brainly.com/question/4978861?referrer=searchResults

#SPJ4

If the orbital radius of the moon were twice its actual value, the orbital period would be approximately 79 days.

The motion of planets and their satellites is governed by Kepler’s Laws.

Kepler’s Laws are as follows:

Law of Orbits

Law of Areas

Law of Periods

According to the law of periods, the square of the time period of a body revolving around another body is proportional to the cube of the distance between the two bodies

The above statement is given by the following formula

T^2 ∝ R^3

Putting T1 = 28 days , T2 = x and R2 = 2R1

T1/T2 =(R1/R2)^3

28/x = (1/2)^3

x = 79 days.

Thus, If the orbital radius of the moon were twice its actual value, the orbital period would be approximately 79 days.

To know more about "Kepler's Laws", refer to the link given below:

brainly.com/question/4978861?referrer=searchResults

#SPJ4

Which answer best describes the processfor calculating the volume of a solution where 5.7 g of ca(no3)2(aq) is dissolved in a 4.00 m aqueous solution?

Answers

The volume of solution is 8.67ml, while calculating the volume of a solution where 5.7 g of ca(no3)2(aq) is dissolved in a 4.00 m aqueous solution.

Description

The value of 6.023 x 1023 is equal to one mole of any substance (Avagadro number). It can be used to quantify the chemical reaction’s byproducts.

The symbol for the unit is mol. How are the number of moles determined?

When we know the mass of a compound, we may calculate how many moles there are.

Therefore, we can calculate the number of moles in a sample by simply weighing it and multiplying the result by the molecular weight. The number of moles is equal to the quotient we arrive at in this case.

How many moles are there in chemistry?

A mole is 6.02214076 x 1023 of any chemical unit, including atoms, molecules, ions, and others.

Calculation

Maa of Ca(NO3)2 = 5.7g

Molar mass of Ca(NO3)2 = 164.09 g/mol

Number of moles of solute [Ca(No3)2] = mass/molar mass

= 5.7/ 164.09 g/mol

= 0.0347 mol

Hence the number of moles of solute is 0.0347 moles

Then we have

Molarity of solution = 4 M

Molarity = Moles of solute/ Volume of solution(l)

Volume of solution (L) = Moles of solute [Ca(No3)2] / Molarity of solution

= 0.0347 / 4

=0.00867 L

= 8.67 ml

Hence the volume of solution is 8.67

To know more about moles, visit:

https://brainly.com/question/26416088

#SPJ4

A car is traveling with a speed of 60.5 miles per hour (mi/h). What is the car's speed in meters per second (m/s)?

Answers

The speed of 60.5 miles per hour (mi/h) expressed in meters per second (m/s) is: 27.046 m/s

To solve this problem the we have to convert the units with the given information.

Information about the problem:

v = 60.5 miles/hv(m/s) =  ?1 h is equivalent to 3600 s1 mile is equivalent to 1609.34 m

By converting the velocity units from (miles/h) to (m/s) we have:

60.5 miles/h * (1609.34 m / 1 miles) * (1 h / 3600 s) = 27.046 m/s

What is unit conversion?

It is the transformation of a value expressed in one unit of measurement into an equivalent value expressed in another unit of measurement of the same nature.

Learn more about unit conversion at: brainly.com/question/141163

#SPJ4

If you walk north toward the front of the ship, with a speed of 1.8 with respect to the ship, what is your velocity with respect to the land?

Answers

The velocity remains the same as the person is walking on the land itself. so, velocity with respect to land is 1.8m/s.

The velocity of an object in relation to another observer is known as its relative velocity. It is the pace at which one object's relative location changes in relation to another object over time. in this case the vector addition of object with respect to ship is added to land but since the object itself move on the ground it becomes zero. so, the velocity is 1.8m/s itself. velocity is a term that describes the speed and direction of a point's motion. For example, a circular path's direction is always perpendicular to a line from the point to the circle's center. A point always moves in a direction that is tangent to its path (a radius).

To learn more about velocity:

https://brainly.com/question/18084516

#SPJ4

A video recorder is loaded with a tape which plays for 180 minutes.
The length of the tape is 260 m.
(a) (i) Calculate the speed of the tape, in metres per minute.

Answers

The speed of the tape, in metres per minute is 1.44 meter per minute

What is speed?

Speed is the distance travelled per unit. Mathematically, it can be expressed as:

Speed = distance / time

With the above formula, we can obtain the speed of the tape. Details below

How to determine the speed of the tape

The following data were obtained from the question:

Distance = 260 mTime = 180 minutesSpeed =?

The speed of the tape can be obtained as illustrated below:

Speed = distance / time

Speed = 260 / 180

Speed = 1.44 meter per minute

Thus, the speed of the tape is 1.44 meter per minute

Learn more about speed:

https://brainly.com/question/680492

#SPJ1

What are the typical patterns of gdp, both in the long run and in the short run?

Answers

The typical patterns of GDP, both in the long run and in the short run, will be fluctuate.

What is GDP?

GDP can be defined as across domestic product in which the markets are the company economy is being measured. It is relation to the monetary policy and the market value of the good which is being brought or sold in the market

There will be a GDP that will be running for the long run and also in the short run depending on the economic condition. This determines to start the good for the services retailing provided is in the flow or not, this depends on the flow of money in the market.

Learn more about GDP, here:

https://brainly.com/question/15682765

#SPJ4

What is the index of refraction of a material in which the red-light wavelength is 450 nm?.

Answers

   The index of refraction of the material through which red light passes is n = 1.44

What is the refractive index?

  The index of refraction is the ratio of the speed of propagation of the speed of light in a vacuum to the speed of light in a given medium.

n = c/v

What is Refraction?

  The relationship is studied by Snell's Law, and relates the index of refraction in different media and allows us to find the angles of refraction of a ray of light, by means of the equation:

  The wavelength of red light in vacuum is 650nm, if in the material the wavelength value is 450nm, we apply the following equation:

f = C/λ

f = 3×10⁸m/s / 650×10⁻⁹m

f = 4.61×10¹⁴ Hz

V = λf

V = 450×10⁻⁹m * 4.61×10¹⁴ Hz

V = 207450000 m/s

n = 3×10⁸m/s / 207450000 m/s

n = 1.44

Learn more about refractive index at:

https://brainly.com/question/12469161

#SPJ4

Calculate the magnitude of the electric field and also the magnitude of the electric field

Answers

The electric field formula E=kQr2 E = k Q r 2 (where k is Coulomb's constant, and the units of the electric field are Newtons/Coulomb) gives the strength or magnitude of the electric field for a charge Q at a distance r from the charge.

To calculate the size of the electric field, we can apply the equation E = k | Q | r 2. If the electric potential is known at every point in a region of space, the electric field can be derived from the potential. In vector calculus notation, the electric field is given by the negative of the gradient of the electric potential, E = −grad V.

Learn more about electric field here-
https://brainly.com/question/8971780

#SPJ4

What is the mass of a cylinder of lead that is 1.80 in diameter, and 4.12 in long?

Answers

The mass of a cylinder of lead that is 1.80 in diameter, and 4.12 in long is 1960 g.

Simply put, density is a measurement of how tightly packed the mass of an object or material is. The mass-to-volume ratio of an object is how scientists describe density. How densely a substance is packed is shown by its density. Density is defined mathematically as Mass/Volume.

Radius of the lead cylinder = diameter / 2 = 1.80 / 2 = 0.9 in = 0.9 × 2.54 cm = 2.29 cm

Height of lead cylinder = 4.12 in = 4.12 × 2.54 cm = 10.46 cm

Volume of cylinder = π[tex]r^2h[/tex] = 3.14 × 2.292 × 10.46 = 172.24 [tex]cm^3[/tex] = 172.24 ml

Mass of lead cylinder = Density * Volume = 11.4 × 172.24 =1960 g

To learn more about density refer to the link:

https://brainly.com/question/15164682

#SPJ4

Other Questions
How did railroads hurt farmers in the late 1800s? they opened new land for settlement and farming. they expanded the size of the markets for farmers. they used unfair business practices and charged high shipping rates. Select all the correct answers.Which three of the following outcomes are associated with European Imperialism?a. Creation of ethnic and language diversity in the African continentb. The existence of Western-style government in South Asian countriesc. The technological progress of Asian countries such as Japan and South Korea.d. French being the official language of several African countries.e. The dominance of the Spanish language and Roman Catholic religion in Mexico. Why do people with high blood pressure sweat Find a for a geometric sequence with the given terms. a = 1/2 and a = 1/16 Economics : What would your wants be in summer and what would your wants be in winter from a economic perspective please list bellow examples. If bean bags are tossed towards a circle. what is the probability a bean bag lands closer to the center of the circle than to the edge of the circle? What are the secret to happiness and the secret to a happy family, according to Feiler? given the function f(t)=2(T)-3,what is f(7) A cricketer scored 12 runs short of a century. How many runs did he score? Please help with this question. Its over similar triangles, what do I do and what is the answer? (i) Write down the largest possible two digit number that can be made with two of the digits. What is rhyme scheme?the pattern of rhymes at the ends of linesthe number of words that rhyme in a stanzathe words within a line that rhymethe words that rhyme across stanzas Change the following sentences to indirect speech.1. He said, I saw her but she didnt see me. 2. She said, I am a nurse and work in a hospital.3. Mike said, I will bring my piano."4. Sophia said, I watched this movie last week." 5. My head is aching, said Sarah. Simplify the given expressions ( )And ( ) How would you classify the interaction between coral and the algae that live in their tissues?. The arrows in the figure represent thegravitational force between marbles that haveequal mass.How should the force arrows look if a marblethat has greater mass replaces one of thesemarbles?A. Both arrows should be drawn longer.B. Both arrows should stay the same length.C. The arrow from the marble with less massshould be longer than the other arrow.D. The arrow from the marble with less massshould be shorter than the other arrow. Tell us about a peer who is deserving of recognition but whose accomplishments may not be acknowledged adequately. why do you think their accomplishments have gone relatively unacknowledged? 10 Medicinal plants of unani culture. How long does it take for the Earth to make one round-trip around the Sun? A car , mass = 2000 kg, is traveling on a highway at a velocity of 20 m/s when it ploughs into a number of sand bags. the sandbags stop the car in 4.0 m what is the force on the car?