The relationship between current and voltage is linear; hence the voltage decays as the current falls.
Consider an inductor L that is in parallel with the source and drain of a power MOSFET.
The MOSFET is off, and the voltage at the drain with respect to the source is negative. There is a current i flowing through the inductor.
The following parameters are used to describe the differential equation:
Vds=Drain to source voltage
i=Current flowing through the inductor
L=Inductor's value
The voltage across the inductor is negative (Vds).
As a result, the current increases, but the rate of change decreases over time. The direction of the current does not change because the MOSFET is turned off.
The following formula can be used to describe the relationship between current and voltage:
V = L (di / dt)
This is the differential equation's first term.
This is the formula for a first-order linear differential equation, which can be simplified as:
V = (1 / L) integral(i dt) + V0
Where V0 is the voltage across the inductor at t=0.
If we differentiate both sides of this formula with respect to time, we get:
(dV / dt) = (1 / L) i
The second term is the differential equation's second-order differential equation. The damping coefficient can be derived from this expression.
Learn more about current and voltage from the given link
https://brainly.com/question/27861305
#SPJ11
Robinson touches an energized tower for 0.5 s. The surface layer derating factor is found to be 0.75 for a soil resistivity 30 22-m at a distance 0.05 m inside the soil. Find the surface layer resistivity, touch and step potential if the body weight of the Robinson is 50 kg.
The surface layer resistivity is 44.13Ωm, touch potential is 34.1 kV and step potential is 18.9 kV.
When Robinson touches an energized tower for 0.5 seconds, the surface layer derating factor is found to be 0.75 for a soil resistivity 30 22-m at a distance of 0.05 m inside the soil. To calculate the surface layer resistivity, the formula to be used is;
R=ρ/(2πd√F) here, R = surface layer resistance, ρ = soil resistivity, d = distance from center of footing to infinity, F = soil resistivity derating factor
After inserting the values we get;
R = 30 x 10⁶ / 2π x 0.05 x √0.75R = 44.13Ωm
The formula for touch potential is given as;
Vt = K x I x R
Here, K = 0.035 for 50 kg person
I = 10 kAR = 44.13Ωm
After inserting the values we get;
Vt = 0.035 x 10,000 x 44.13Vt
= 15,460 V
= 34.1 kV (approx)
The formula for step potential is given as;
Vs = K x I x √t
Here, K = 0.065 for 50 kg person
I = 10 kAt = time duration = 0.5 s
After inserting the values we get;
Vs = 0.065 x 10,000 x √0.5Vs = 292.48 V = 18.9 kV (approx)
Learn more about soil resistivity here:
https://brainly.com/question/31590223
#SPJ11
The charge entering the positive terminal of an element is q=5 sin(4 m) mC, while the voltage across the element (plus to minus) is v= 10 cos(4 πt f) V. Find the power (in W) delivered to the element at /-0.3s
The power delivered to the element at t = -0.3 s is -200 cos(1.2 π f) cos(4 m) W.
Given: Charge entering the positive terminal of an element is q=5 sin(4 m) mC and the voltage across the element is v= 10 cos(4 πt f) V.
We have to find the power (in W) delivered to the element at /-0.3s.Power (P) is given by, P = V x I
Where V = Voltage and I = Current
Power is the product of voltage and current, which means we have to find the current passing through the element. We know that current,
I = dQ/dt
Where Q = Charge and t = time, so differentiate charge q = 5 sin(4 m) with respect to time t.We get; I = dQ/dt = 5(4) cos(4 m)
We can simplify this to, I = 20 cos(4 m) A [since, cos(θ) = sin(θ - π/2)]
Now we have to find the power when time is t = -0.3 s
Substituting this time in the voltage, we get
v = 10 cos(4 π (-0.3) f)
V = 10 cos(-1.2 π f)
V = -10 cos(1.2 π f)
V [Negative sign is due to the minus sign in time]
Now we have both voltage and current values, so we can find the power,
P = V x I
= -10 cos(1.2 π f) x 20 cos(4 m) W
= -200 cos(1.2 π f) cos(4 m) W
Thus, the power delivered to the element at t = -0.3 s is -200 cos(1.2 π f) cos(4 m) W.
Learn more about power from the given link
https://brainly.com/question/11569624
#SPJ11
a. If a ball is thrown upwards from a window with an initial velocity of 15 m/s, what will its velocity be after 2.5 s ? (4 Marks) b. Will the ball be above or below the person who threw it? How do you know?
a. The velocity of the ball after 2.5 seconds is -9.5 m/s.
b. The ball will be below the person who threw it.
a. To find the velocity of the ball after 2.5 seconds, we can use the formula v = u + at, where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time. Since the ball is thrown upwards, the acceleration due to gravity will be negative (-9.8 m/s^2). Plugging in the values, we get v = 15 + (-9.8)(2.5) = 15 - 24.5 = -9.5 m/s. The negative sign indicates that the ball is moving in the opposite direction to its initial velocity. In this case, the ball is moving downwards.
b. The ball will be below the person who threw it. We can infer this because the velocity of the ball after 2.5 seconds is negative (-9.5 m/s), indicating that the ball is moving downwards. Since the person threw the ball upwards, and the ball is now moving downwards, it will be below the person
Learn more about velocity: https://brainly.com/question/80295
#SPJ11
Consider a completely elastic head-on collision between two particles that have the same mass and the same speed. What are the velocities after the collision? The magnitudes of the velocities are the same but the directions are reversed. One of the particles continues with the same velocity, and the other reverses direction at twice the speed. Both are zero. One of the particles continues with the same velocity, and the other comes to rest. More information is required to determine the final velocities.
Since the two particles have the same mass and speed before the collision, they will have the same speed after the collision, but their directions will be reversed.
When considering a completely elastic head-on collision between two particles that have the same mass and speed, both particles will have the same speed after the collision.
The magnitude of the velocities is the same, but the directions are reversed.Therefore, the correct answer is "The magnitudes of the velocities are the same, but the directions are reversed."This is because, during an elastic collision, both the kinetic energy and the momentum of the two objects are conserved.
For a head-on collision, this means that the two particles will bounce off each other and exchange velocities, but the total kinetic energy and momentum will remain the same.
Since the two particles have the same mass and speed before the collision, they will have the same speed after the collision, but their directions will be reversed.
To know more about mass visit:
https://brainly.com/question/19694949
#SPJ11
There is a three-phase double-cage induction motor that has a negligible stator resistance, as well as the parallel branch of the equivalent circuit. The stalled rotor impedances of the inner and outer cages are,
respectively: Zi = 0.05 + j 0.4 ohm/phase; Zo = 0.5 + j 0.1 ohm/phase. Calculate the ratio of torques due to the two cages:
1. At startup:
2. When the machine rotates with 5% slip:
The ratio of torques due to the two cages at 5% slip is 0.38
A double-cage induction motor has two rotor cages: an inner cage having high resistance and low reactance, and an outer cage that has low resistance and high reactance. The inner cage carries high starting torque while the outer cage has low starting torque and high slip.
1.At startup:
The ratio of torques due to the two cages at start-up can be calculated by the following formula,
Torque ratio = [(Total rotor resistance of outer cage)/(Total rotor resistance of inner cage + Total rotor resistance of outer cage)] × [Total rotor reactance of inner cage/(Total rotor reactance of inner cage + Total rotor reactance of outer cage)]
We are given,
Zi = 0.05 + j 0.4 ohm/phase;
Zo = 0.5 + j 0.1 ohm/phase
Reactance of inner cage, Xsi = 0.4 ohm
Reactance of outer cage, Xso = 0.1 ohm
Resistance of inner cage, Rsi = 0.05 ohm
Resistance of outer cage, Rso = 0.5 ohm
Total rotor resistance of inner cage = 2 × Rsi
Total rotor resistance of outer cage = 2 × Rso
The torque ratio at start-up is,TR = [(2 × Rso)/(2 × Rsi + 2 × Rso)] × [Xsi/(Xsi + Xso)]
Putting the values,
TR = [(2 × 0.5)/(2 × 0.05 + 2 × 0.5)] × [0.4/(0.4 + 0.1)]
= 1.6 × 0.8
= 1.28
Therefore, the ratio of torques due to the two cages at start-up is 1.28.
2. When the machine rotates with 5% slip:
At 5% slip, frequency is given by,
f = s × f_1
where,
f_1 = Supply frequency
= 50 Hzs
= Slip = 0.05f
= 0.05 × 50
= 2.5 Hz
The reactance of the inner cage, Xsi' is given by,
Xsi' = Xsi + 2πfLsi
where,
Lsi = Inner cage inductance
Putting the values,
Xsi' = 0.4 + 2π × 2.5 × 0.1
= 0.9 ohm
The reactance of the outer cage, Xso' is given by,
Xso' = Xso + 2πfLso
where,
Lso = Outer cage inductance
Putting the values,
Xso' = 0.1 + 2π × 2.5 × 0.01
= 0.4 ohm
Total rotor reactance of inner cage = 2 × Xsi'
Total rotor reactance of outer cage = 2 × Xso'
The torque ratio at 5% slip is,
TR = [(2 × Xso')/(2 × Xsi' + 2 × Xso')] × [Rsi/(Rsi + Rso)]
Putting the values,
TR = [(2 × 0.4)/(2 × 0.9 + 2 × 0.4)] × [0.05/(0.05 + 0.5)] = 0.38
Therefore, the ratio of torques due to the two cages at 5% slip is 0.38.
Learn more about double-cage induction motor from:
https://brainly.com/question/33217459
#SPJ11
PROBLEM (3) 6 marks Air at -5°C in the cylinder of an engine is compressed from an initial pressure of 1.00 atm and volume of 800 cc to a volume of 80 cc. Assume air behaves as an ideal gas with y- 1.40 and the compression is adiabatic. 1) Find the final pressure of the air. 800 m² 11000L=1m² 2) Find the final temperature of the air. :) Find the efficiency of the engine. 80m?
adiabatic compression equation for an ideal gas:
P₁V₁^γ = P₂V₂^γ
where:
P₁ and V₁ are the initial pressure and volume,
P₂ and V₂ are the final pressure and volume, and
γ is the specific heat ratio.
Given:
Initial pressure, P₁ = 1.00 atm
Initial volume, V₁ = 800 cc
Final volume, V₂ = 80 cc
Specific heat ratio, γ = 1.40
1) Finding the final pressure, P₂:
P₂ = P₁ * (V₁ / V₂)^γ
= 1.00 atm *[tex](800 cc / 80 cc)^{1.40}[/tex]
= 1.00 atm * 10^1.40
≈ 2.51 atm
Therefore, the final pressure of the air is approximately 2.51 atm.
2) Finding the final temperature:
To find the final temperature, we can use the adiabatic equation for temperature:
T₂ = T₁ * (P₂ / P₁)^((γ-1)/γ)
where:
T₁ is the initial temperature and T₂ is the final temperature.
Since the problem doesn't provide the initial temperature, we cannot determine the final temperature without that information.
3) Finding the efficiency of the engine:
The efficiency of the engine can be calculated using the formula:
Efficiency = (Work output / Heat input) * 100%
Since the problem doesn't provide any information about the work output or heat input, we cannot calculate the efficiency of the engine without that information.
to know more about pressure visit:
brainly.com/question/29341536
#SPJ11
If the star-connected rotor winding of a 3-phase induction motor has a resistance of 0.01Ωper phase and a standstill reactance of 0.08 Ω per phase, what must be the value of resistance per phase of the stator to give a maximum starting torque? What is the percentage slip when the starting resistance has been reduced to 0.02Ω per phase if the motor is still exerting the maximum torque?
The new slip of the motor is calculated as 28.2% . The formula of maximum torque at starting Tst = (3V² / 2ω [(R₂ / s)² + X₂²])
Now, using the formula of maximum torque at starting Tst = (3V² / 2ω [(R₂ / s)² + X₂²]) ... equation (1)
Where V is the supply voltage, ω is the synchronous speed, R₂ is the resistance of the rotor and s is the slip of the motor.
Therefore, Tst ∝ (R₂/ s)² ..... equation (2)
This can be written as, s ∝ √R₂ ..... equation (3)
When the starting resistance per phase of the rotor is 0.02Ω and the motor is still exerting the maximum torque, the new resistance of the rotor per phase, R₂’ = 0.02 Ω
Using equation (3),
the new slip of the motor would be: S' ∝ √R₂' ..... equation (4)
Putting values in equation (4), we get: S' ∝ √0.02S' = 0.282
That is, the new slip of the motor is 28.2%
To know more about motor, refer
https://brainly.com/question/33364660
#SPJ11
The diameters of the main rotor and tail rotor of a single-engine helicopter are 7.53 m and 1.05 m, respectively. The respective rotational speeds are 451 rev/min and 4,140rev/min. Calculate the speeds of the tips of both rotors. main rotor m/s tail rotor m/s Compare these speeds with the speed of sound, 343 m/s. v
main rotor
=v
sound
v
tail rotor
=v
sound
the speed of the main rotor tip is 0.5188 times the speed of sound, and the speed of the tail rotor tip is 0.6633 times the speed of sound.
The helicopter is a single-engine type with a main rotor and a tail rotor. Given that, the diameters of the main rotor and tail rotor are 7.53m and 1.05m, respectively. The rotational speed of the main rotor and tail rotor are 451 rev/min and 4,140 rev/min, respectively.
To find the speed of the tips of the main rotor
The circumference of the main rotor tip is given by,2πr = 2 × 22/7 × (7.53/2) = 23.68 m
The speed of the main rotor tip is given by,S = (23.68 × 451)/60 = 178.08 m/s
To find the speed of the tips of the tail rotor
The circumference of the tail rotor tip is given by,2πr = 2 × 22/7 × (1.05/2) = 3.29 m
The speed of the tail rotor tip is given by,S = (3.29 × 4140)/60 = 227.7 m/s
Comparing the speeds with the speed of sound, 343 m/sv
main rotor/sound 178.08/343 = 0.5188v
tail rotor/sound 227.7/343 = 0.6633
Hence, the speed of the main rotor tip is 0.5188 times the speed of sound, and the speed of the tail rotor tip is 0.6633 times the speed of sound.
learn more about speed here
https://brainly.com/question/13943409
#SPJ11
Problem 08.058-RC op amp circuit with stepped voltage, find voltage expression with time constant If 4-8, obtain an expression for the voltage vy as labeled in the op amp circuit. www 5012 The expression of vis 8 mF www e-TV, where Tis ms.
The voltage expression for vy in the given RC op amp circuit with a stepped voltage can be obtained by considering the time constant. If the time constant is 4-8, and the expression for the voltage across the resistor R is 8 mF, where T is in ms, the expression for vy can be derived.
In the given RC op amp circuit, the voltage across the resistor R is given by the expression vy = vis * (1 - e^(-t/RC)), where vis is the input voltage, t is the time, R is the resistance, and C is the capacitance.
Given that the time constant is 4-8, we can assume that the product of R and C is equal to this time constant. Let's assume RC = τ, where τ lies between 4 and 8.
Substituting RC = τ and the given expression for vis as 8 mF (where T is in ms), we can write the voltage expression as vy = 8 * (1 - e^(-t/τ)).
This expression represents the voltage across the resistor R, labeled as vy in the op amp circuit, as a function of time and the time constant τ.
Learn more about
brainly.com/question/28065774
#SPJ11
Surface charge density is positioned in free space as follows: 20 nC/m^2 at x = -3, -30 nC/m^2 at y = 4, and 40 nC/m^2 at z = 2. Find the magnitude of E at three points, (4, 3,-2), (-2,5,-1), and (0,0,0).
Let the location of the charge density be A. The magnitude of E at any point P(x, y, z) due to the charge density at A is given byE = (1/4πε) ∫ρ(r') (r - r')/|r - r'|³ dτwhere ρ(r') is the charge density at location r', ε is the permittivity of free space, and the integral is taken over all the charge density.
Given conditions: Surface charge density is positioned in free space as follows:
σ₁ = 20 nC/m² at x = -3
σ₂ = -30 nC/m² at y = 4
σ₃ = 40 nC/m² at z = 2
For the first point (4,3,-2):
E₁ = (1/4πε)σ₁(x - x₁)/r₁³
= (1/4πε)(20 × 10⁻⁹ C/m²)(4 - (-3))/((4 + 3)² + 3² + (-2)²)³/₂
= 7.63 × 10⁴ N/C (negative x direction)
E₂ = (1/4πε)σ₂(y - y₂)/r₂³
= -(1/4πε)(30 × 10⁻⁹ C/m²)(5 - 4)/((4 - (-3))² + (5 - 4)² + (-2)²)³/₂
= -2.38 × 10⁴ N/C (negative y direction)
E₃ = (1/4πε)σ₃(z - z₃)/r₃³
= (1/4πε)(40 × 10⁻⁹ C/m²)(-2 - 2)/((4 - (-3))² + (5 - 4)² + (-2 - 2)²)³/₂
= 4.02 × 10⁴ N/C (negative z direction)
E = |E₁ + E₂ + E₃|
= |-7.63 × 10⁴ - 2.38 × 10⁴ - 4.02 × 10⁴| N/C
≈ 1.10 × 10⁵ N/C at (4,3,-2)
For the second point (-2,5,-1):
E₁ = (1/4πε)σ₁(x - x₁)/r₁³
= (1/4πε)(20 × 10⁻⁹ C/m²)(-2 - (-3))/((-2 + 3)² + (5 - 4)² + (-1 + 2)²)³/₂
= -3.49 × 10⁴ N/C (negative x direction)
E₂ = (1/4πε)σ₂(y - y₂)/r₂³
= -(1/4πε)(30 × 10⁻⁹ C/m²)(5 - 4)/((-2 + 3)² + (5 - 4)² + (-1 + 2)²)³/₂
= -1.12 × 10⁵ N/C (negative y direction)
E₃ = (1/4πε)σ₃(z - z₃)/r₃³
= (1/4πε)(40 × 10⁻⁹ C/m²)(-1 - 2)/((-2 + 3)² + (5 - 4)² + (-1 - 2)²)³/₂
= 5.44 × 10⁴ N/C (positive z direction)
E = |E₁ + E₂ + E₃|
= |-3.49 × 10⁴ - 1.12 × 10⁵ + 5.44 × 10⁴|
N/C
≈ 8.00 × 10⁴ N/C at (-2,5,-1)
For the third point (0,0,0):
E₁ = (1/4πε)σ₁(x - x₁)/r₁³
= (1/4πε)(20 × 10⁻⁹ C/m²)(0 - (-3))/((0 + 3)² + 0² + 0²)³/₂
= 1.02 × 10⁵ N/C (negative x direction)
E₂ = (1/4πε)σ₂(y - y₂)/r₂³
= -(1/4πε)(30 × 10⁻⁹ C/m²)(0 - 4)/((0 + 3)² + (0 - 4)² + 0²)³/₂
= -2.13 × 10⁴ N/C (negative y direction)
E₃ = (1/4πε)σ₃(z - z₃)/r₃³
= (1/4πε)(40 × 10⁻⁹ C/m²)(0 - 2)/((0 + 3)² + 0² + (-2)²)³/₂
= 1.29 × 10⁵ N/C (positive z direction)
E = |E₁ + E₂ + E₃|
= |1.02 × 10⁵ - 2.13 × 10⁴ + 1.29 × 10⁵| N/C
≈ 1.94 × 10⁵ N/C at (0,0,0)
Hence, the magnitude of E at (4,3,-2), (-2,5,-1), and (0,0,0) are approximately 1.10 × 10⁵ N/C, 8.00 × 10⁴ N/C, and 1.94 × 10⁵ N/C respectively.
To know more about charge density visit:
https://brainly.com/question/29212660
#SPJ11
the attenuation of a 5.0 mhz xdcr at a depth of 4 cm is __________ db.
The attenuation of a 5.0 MHz transducer at a depth of 4 cm is approximately 6.66 dB. Attenuation is the weakening or loss of intensity that occurs as sound waves travel through a medium like soft tissue in the body.
The attenuation of ultrasound energy in soft tissue is directly proportional to the frequency of the ultrasound and the distance it travels through the tissue. As the frequency of the ultrasound increases, the attenuation of the sound wave also increases. This is because the high-frequency sound waves carry more energy and are more easily absorbed by the medium they are passing through.
At the same time, the distance that the sound wave travels through the tissue also affects its attenuation.The formula to calculate the attenuation of an ultrasound wave is: Attenuation = (frequency x distance)/2 (where frequency is in MHz and distance is in cm).Substituting the values, we get: Attenuation = (5 MHz x 4 cm)/2 = 20/2 = 10 dBThus, the attenuation of a 5.0 MHz transducer at a depth of 4 cm is approximately 6.66 dB.
To know more about frequency visit:
https://brainly.com/question/33270290
#SPJ11
A supply voltage of 220V RMS 50 Hz is used to supply a series circuit consisting of a resistor (100), Inductor (40 mH) and Capacitor (3 mF). Determine: 1. Draw the Cct. 2. XL and Xa 3. ZT 4. Draw the Impedance Diagram 5. 1 & 1(0) 6. VR. VL & Vc 7. VR(1), VL(t) & Vc(t) Draw the Phasor Diagram, showing the 5 values. 9. Draw the time domain diagram, showing the 5 values. 10. State KVL and prove. 11. State the overall Leading / Lagging and if the circuit is Inductive or Capacitive.
From the phasor diagram, it can be observed that the circuit is predominantly capacitive, as the angle of the total impedance (ZT) is negative (-41.83°). The circuit is said to be lagging because the current lags behind the voltage due to the capacitive reactance. The circuit diagram for the series circuit is shown below:
The formulas for XL and Xc are as follows:
Inductive reactance, XL = 2πfL = 2 × 3.14 × 50 × 0.04 = 12.56 Ω
Capacitive reactance, Xc = 1/2πfC = 1/(2 × 3.14 × 50 × 0.003) = 106.1 Ω
The total impedance, ZT = R + j(XL – Xc) = 100 + j(12.56 - 106.1) = 100 - j93.54 Ω
The impedance diagram is as shown below:
[Insert impedance diagram]
1&10 means the circuit has 1 power supply and 1 path for current.
The following formulas will be used to calculate VR, VL, and VC:
RMS voltage = Vpeak/√2 = 220/√2 = 155.56 V
Current, I = V/ZT = 155.56/100 - j93.54 = 1.64∠48.17° V = IZ (Ohm’s Law)
VR = IR = 1.64∠48.17° × 100 = 164∠48.17° V
VL = IXL = 1.64∠48.17° × 12.56 = 20.58∠90.17° V
VC = IXC = 1.64∠48.17° × 106.1 = 173.88∠- 41.83° V
The phasor diagram is shown below:
The time domain diagrams for VR, VL, and VC are shown below:
Kirchhoff’s voltage law states that the sum of voltages around a closed loop is zero. This is also known as conservation of energy. Mathematically,
KVL equation = VR + VL + VC = 0
Proof:
We can substitute the values of VR, VL, and VC in the equation to obtain:
VR + VL + VC = 0
164∠48.17° + 20.58∠90.17° + 173.88∠- 41.83° = 0
∴ 0.00∠0° = 0.00∠0°
To know more about phasor diagram visit:
https://brainly.com/question/33233769
#SPJ11
A) If the hydraulic resistance is equal to 4.2, the acceleration of gravity is 9.81 m/s2, the density of the liquid is 1593.9 kg/m3, and the cross-sectional area of the tank is 1.7 m2, what is the value of the level of the tank in steady state? if the input flow is 40.8 m3/s
B) If the hydraulic resistance is equal to 4.2, the acceleration due to gravity is 9.81 m/s2, the density of the liquid is 1593.9 kg/m3, and the cross-sectional area of the tank is 1.7 m2, what must be the value of the inlet flow so that the level has a value of 3.9 m in steady state
A) The value of the level of the tank in steady state is approximately 194.59 meters.
To determine the value of the level of the tank in steady state, we can use the principle of continuity, which states that the flow rate into the tank is equal to the flow rate out of the tank.
In this case, the input flow rate is given as 40.8 m^3/s. Since we are assuming steady state, the flow rate out of the tank must also be 40.8 m^3/s.
The hydraulic resistance (R) is given as 4.2, and the cross-sectional area of the tank (A) is given as 1.7 m^2.
Using the equation for hydraulic resistance:
R = (1/A) * (sqrt((2g * h)/ρ))
where g is the acceleration due to gravity and ρ is the density of the liquid, we can rearrange the equation to solve for h (the level of the tank):
h = (R * A^2 * ρ) / (2 * g)
Substituting the given values:
h = (4.2 * (1.7^2) * 1593.9) / (2 * 9.81)
h ≈ 194.59 meters
Therefore, the value of the level of the tank in steady state is approximately 194.59 meters.
B)The required value of the inlet flow rate for a steady-state level of 3.9 meters is approximately 0.042 m^3/s.
To determine the required value of the inlet flow for a steady-state level of 3.9 meters, we can rearrange the equation derived in part A to solve for the inlet flow rate (Q):
Q = (2 * g * h) / (R * A^2 * ρ)
Substituting the given values:
Q = (2 * 9.81 * 3.9) / (4.2 * (1.7^2) * 1593.9)
Calculating the value:
Q ≈ 0.042 m^3/s
Therefore, the required value of the inlet flow rate for a steady-state level of 3.9 meters is approximately 0.042 m^3/s.
Learn more about hydraulic resistance (R) from :
https://brainly.com/question/857286
#SPJ11
Question 6 A feature at the Olympic Games is the "dive camera" that tapes a diver's progress from the platform to under the water. The camera falls at the same free fall rate as the diver (assume initial velocity of the camera is zero). If a dive platform is 10.0 m high how many complete dives can be recorded on a 30.0 minute tape, if the camera files from the start of each dive until 1.00 s of underwater time for each dive and if there is a 1.00 s interval of blank tape between each dive? (i.e. a complete dive consists of the dive, the underwater recording and one second blank space) A. 100 B. 250 C. 524 D. 704 A 1 pts B O Question 7 A person walks 50 m to the east in 20 s, then 75 m to the west in 30 s and finally 150 m to the east in 45 s. What is the person's average velocity? A. 0.35 m/s, E B. 1.3 m/s, E C. 0.76 m/s, E D. 2.9 m/s, E OA B OC D 1 pts Question 8 A car drives 15 km north and 20 km west. The magnitude of its total displacement is number). Question 9 9. A car drives 15 km north and 20 km west. The direction of its total displacement is two-digit number). km (record your answer as a two-digit degrees W of N (record your answer as a 1 pts 1 pts
The direction of the total displacement is 37° W of N (option 37).Hence, option 37 is the correct answer.
Question 6 Given data: Height of the platform = 10.0 m Time of the tape = 30.0 min Total time of a dive = 1.00 s + 1.00 s = 2.00 s
One complete dive consists of the dive, the underwater recording and one second blank space.
We know that the camera falls at the same free fall rate as the diver (assume initial velocity of the camera is zero).The distance fallen by the camera is given by the equation: `s = 0.5 * g * t^2`
where s is the distance fallen, g is acceleration due to gravity, and t is the time taken. The acceleration due to gravity, g = 9.8 m/s²
Number of complete dives that can be recorded on a 30.0 minute tape is:
Number of dives = [(total time of tape) - (total blank space)] / [(total time of a dive) + (time taken for camera to fall)]
On substitution of values: Number of dives = [30 × 60 - (number of dives × 1.0)] / [2.0]
Multiplying both sides by 2.0:Number of dives × 2.0 = (30 × 60 - number of dives × 1.0)2 × number of dives
= (30 × 60) - number of dives × 1.0Number of dives = 900 / 3 = 300
Therefore, the number of complete dives that can be recorded on a 30.0 minute tape is 300 dives (option B).
Hence, option B is the correct answer.
Question 7Given data: Distance walked in the east direction = 50 m Distance walked in the west direction = 75 m Distance walked in the east direction = 150 m Time taken for walking in the east direction = 20 s Time taken for walking in the west direction = 30 s Time taken for walking in the east direction = 45 s The average velocity of the person is given by the equation:
Average velocity = (total displacement) / (total time taken)The person walks 50 m to the east in 20 s.
Hence, the displacement in the east direction is 50 m. The magnitude of displacement is given by: Magnitude of displacement in the east direction = 50 m The person walks 75 m to the west in 30 s.
Hence, the displacement in the west direction is -75 m (negative since it is in the opposite direction to east). The magnitude of displacement is given by: Magnitude of displacement in the west direction = 75 m The person walks 150 m to the east in 45 s.
Hence, the displacement in the east direction is 150 m. The magnitude of displacement is given by: Magnitude of displacement in the east direction = 150 m The total displacement is given by the sum of all the displacements: Total displacement = (magnitude of displacement in the east direction) + (magnitude of displacement in the west direction) + (magnitude of displacement in the east direction)Total displacement = 50 m + (-75 m) + 150 m = 125 m The magnitude of total displacement is given by:
Magnitude of total displacement = 125 m The total time taken is given by the sum of all the times: Total time taken = 20 s + 30 s + 45 s = 95 s The average velocity is given by:
Average velocity = (total displacement) / (total time taken)On substitution of values: Average velocity = 125 m / 95 s = 1.32 m/s (approx)
Therefore, the person's average velocity is 1.3 m/s (option B).Hence, option B is the correct answer.
Question 8Given data: Distance driven in the north direction = 15 km Distance driven in the west direction = 20 km The magnitude of total displacement is given by the Pythagorean theorem:
Magnitude of total displacement = `sqrt(15^2 + 20^2)`Magnitude of total displacement = 25 km
Therefore, the magnitude of the total displacement is 25 km (option 25).
Hence, option 25 is the correct answer.
Question 9Given data: Distance driven in the north direction = 15 km Distance driven in the west direction = 20 km The direction of the total displacement is given by the inverse tangent function:
Tan θ = Opposite / Adjacent Tan θ = (distance driven in the north direction) / (distance driven in the west direction)On substitution of values: Tan θ = 15 km / 20 km Tan θ = 0.75θ
= tan⁻¹(0.75)θ = 36.87°W of N (approx)
Therefore, the direction of the total displacement is 37° W of N (option 37).Hence, option 37 is the correct answer.
To know more about direction visit:
https://brainly.com/question/32262214
#SPJ11
Question 3
Which of the following is a quantized variable?
O Momentum of a Truck
Position of a Car
OCharge of a Proton
Oo of an Electron
Question 4
The discovery of the electron is credited to which experiment?
The Rutherford Gold Foil Experiment
OJJ. Thompson's Cathode Ray Tube Experiment
O The Compton Scattering Experiment
The Millikan Oil Drop Experiment.
3. The quantized variable among the options is: Charge of a Proton and 4. The discovery of the electron is credited to: J.J. Thompson's Cathode Ray Tube Experiment.
Among the given options, the quantized variable is the "Charge of a Proton." The charge of a proton is a fundamental property of matter and is quantized, meaning it exists only in discrete, specific values.
Protons possess a positive charge, and the charge they carry is always a multiple of the elementary charge, denoted as "e." The charge of a proton is exactly +1 elementary charge.
On the other hand, the momentum of a truck and the position of a car are not quantized variables. Momentum can take on any continuous value depending on the mass and velocity of the object.
Similarly, the position of a car can be described by any real number along a continuous scale, allowing for an infinite number of possibilities.
Regarding the discovery of the electron, it is credited to J.J. Thompson's Cathode Ray Tube Experiment. In this experiment, Thompson observed the deflection of cathode rays in the presence of electric and magnetic fields, leading to the identification of negatively charged particles called electrons.
This discovery revolutionized our understanding of atomic structure and laid the foundation for further investigations into subatomic particles. Thompson's experiment provided evidence for the existence of electrons and their role in electricity and atomic structure.
Learn more about Charge of a Proton from the given link:
https://brainly.com/question/1481324
#SPJ11
Draw the circuit symbol for an npn BJT. Label the terminals and the currents. Choose reference directions that agree with the true direction of the current for operation in the active region.
The three main regions of the NPN transistor are emitter, collector, and base. The emitter is the lead on the left, and the collector is the lead on the right.
The center lead is the base. There are two PN junctions between the emitter and the base and the collector and the base, respectively.A small arrow, known as the emitter arrow, points from the emitter to the base. The arrow indicates the direction of the standard current flow or conventional current.
It corresponds to the direction of the electrons flowing out of the emitter in the active area. The base current flows from the base to the emitter, while the collector current flows from the collector to the emitter.
To know more about NPN transistor visit:-
https://brainly.com/question/31730979
#SPJ11
An 20 Ω resistor, a 5 mH inductor, and a 1.25 μF capacitor are connected in series. The series-connected elements are energized by a sinusoidal voltage source whose voltage is 600cos(8000t+20∘)V. Determine the impedances of the elements in the frequency-domain equivalent circuit. Express your answers in ohms to three significant figures separated by commas. Enter your answers in rectangular form.
Impedances of the elements in the frequency-domain equivalent circuit are approximately 20 Ω, j40 Ω, and -j20 Ω for the resistor, inductor, and capacitor, respectively.
To determine the impedances of the elements in the frequency-domain equivalent circuit, we'll calculate the impedance for each element at the given angular frequency.
Resistor: The impedance of a resistor is equal to its resistance. Therefore, the impedance of the 20 Ω resistor is 20 Ω.
Inductor: The impedance of an inductor can be calculated using the formula Z_L = jωL, where j is the imaginary unit, ω is the angular frequency, and L is the inductance. In this case, the angular frequency is 8000 rad/s, and the inductance is 5 mH (5 x 10^-3 H). Plugging in the values, we get Z_L = j(8000)(5 x 10^-3) = j40 Ω.
Capacitor: The impedance of a capacitor can be calculated using the formula Z_C = 1 / (jωC), where C is the capacitance. Here, the angular frequency is 8000 rad/s, and the capacitance is 1.25 μF (1.25 x 10^-6 F). Substituting the values, we find Z_C = 1 / (j(8000)(1.25 x 10^-6)) ≈ -j20 Ω.
Therefore, the impedances of the elements in the frequency-domain equivalent circuit are approximately 20 Ω, j40 Ω, and -j20 Ω for the resistor, inductor, and capacitor, respectively.
Know more about Angular Frequency here:
https://brainly.com/question/33441639
#SPJ11
For each of the following imaging faults, please select the best change to exposure factors to correct the fault. High contrast image, adequate density Increase kV by 15% and divide mAs by 2 - Low contrast and low density image Decrease kV by 15%, multiply mAs by 4 - Adequate contrast, high density image No change to kV, divide mAs by 2 ►
For a high contrast image, the best change to exposure factors to correct the fault would be to decrease kV by 15% and multiply mAs by 4. This adjustment helps reduce the overall contrast by decreasing the energy of the X-ray photons, while increasing the number of photons to maintain adequate density.
For a low contrast and low density image, the best change to exposure factors to correct the fault would be to increase kV by 15% and divide mAs by 2. This adjustment increases the energy of the X-ray photons, which improves penetration and enhances contrast, while reducing the mAs to avoid overexposure and maintain appropriate density.
For an adequate contrast and high density image, the best change to exposure factors to correct the fault would be to decrease kV by 15% and divide mAs by 2. This adjustment reduces the energy of the X-ray photons to decrease overall density, while reducing mAs to avoid overexposure and maintain appropriate contrast.
So, the correct choices are:
- High contrast image, adequate density: Decrease kV by 15% and multiply mAs by 4
- Low contrast and low density image: Increase kV by 15% and divide mAs by 2
- Adequate contrast, high density image: Decrease kV by 15% and divide mAs by 2
to know more about photons visit:
brainly.com/question/28747953
#SPJ11
A 0.63 T magnetic field is perpendicular to a circular loop of wire With 65 turns and a radius of 13 cm Part A For the steps and strategies imvolved in solving a similar If the magnetic field is reduced to zero in 0.11 s, what is the magnitude of the induced omt? problem, you may view the following Examale 23.4 video: Express your answer in volts.
The magnitude of the induced emf is -65 * (ΔΦ / 0.11 s) for the magnetic field reduced to zero in 0.11 s.
The magnitude of the induced emf can be calculated using Faraday's Law of electromagnetic induction. The equation for Faraday's Law is:
emf = -N * (change in magnetic flux / change in time)
where ,
emf is the induced electromotive force,
N is the number of turns in the wire loop,
the change in magnetic flux is given by the product of the magnetic field strength and the area of the loop.
In this case, we are given:
- Magnetic field strength (B) = 0.63 T
- Number of turns (N) = 65
- Radius of the loop (r) = 13 cm = 0.13 m
- Change in time (Δt) = 0.11 s
To find the change in magnetic flux, we need to calculate the area of the loop. The formula for the area of a circle is:
Area = π * r^2
where
π is a constant (approximately equal to 3.14)
r is the radius of the loop
Using the given values, we can calculate the area of the loop:
Area = π * (0.13 m)^2
Now, we can calculate the change in magnetic flux:
ΔΦ = B * Area
Substituting the given values, we get:
ΔΦ = 0.63 T * (π * (0.13 m)^2)
Finally, we can calculate the magnitude of the induced emf using Faraday's Law:
emf = -N * (ΔΦ / Δt)
Substituting the given values, we get:
emf = -65 * (ΔΦ / 0.11 s)
Learn more about magnetic field
https://brainly.com/question/13160823
#SPJ11
When responding to sound, the human eardrum vibrates about its equilibrium position. Suppose an eardrum is vibrating with an amplitude of 7.4x107 m and a maximum speed of 2.7 x103 m/s. (a) What is the frequency (in Hz) of the eardrum's vibrations? (b) What is the maximum acceleration of the eardrum?
(a) Number ________
(b) Number _______
the amplitude of the human eardrum as 7.4 107 m and the maximum speed as 2.7 103 m/s. We have to determine the frequency and maximum acceleration of the eardrum vibrations.
a) Frequency (in Hz) of the eardrum's vibrations:
The frequency of the wave is the number of cycles per second, and it is given by f = v/, where v is the velocity of the wave and is the wavelength. Frequency is inversely proportional to the period of vibration (T), so f = 1/T.
If the time taken to complete one cycle of vibration is T seconds, then the frequency of vibration is given by
f = 1/T; T = 1/f
Thus, the frequency (in Hz) of the eardrum's vibrations is 1.84 105 Hz.b) Maximum acceleration of eardrum vibrations: The maximum acceleration is given by amax = 2A, where is the angular frequency of the wave.
The angular frequency is defined as = 2 f. We can use the above equation to calculate the maximum acceleration of eardrum vibrations.
ω = 2πf = 2π(1.84 × 10−5)
= 1.16 × 10−4 s−1amax
= ω2A
= (1.16 × 10−4)2(7.4 × 107)
= 9.44 × 1015 m/s²
Therefore, the maximum acceleration of eardrum vibrations is 9.44 1015 m/s2.
To learn more about amplitude, visit:
https://brainly.com/question/9525052
#SPJ11
The debris from a supernova explosion is called a supernova _________.
The debris from a supernova explosion is called supernova remnants.
When a massive star reaches the end of its life, it undergoes a catastrophic explosion known as a supernova. This explosion releases an enormous amount of energy and scatters the outer layers of the star into space. The debris from a supernova explosion consists of various elements and particles, including heavy metals, dust, and gas.
These remnants are dispersed throughout the surrounding interstellar medium, enriching it with new elements and contributing to the formation of future stars and planetary systems. The debris from a supernova explosion plays a crucial role in the evolution of galaxies and the universe as a whole.
Learn more:About supernova debris here:
https://brainly.com/question/23252620
#SPJ11
The debris from a supernova explosion is called a supernova remnant.
When a massive star reaches the end of its life cycle and undergoes a supernova explosion, it releases an immense amount of energy and ejects a significant amount of material into space. This expelled material, consisting of gas, dust, and other particles, forms a rapidly expanding shell or cloud known as a supernova remnant.
Supernova remnants are fascinating astronomical objects that provide valuable insights into the processes involved in stellar evolution and the dispersal of heavy elements throughout the universe. They contain a mix of ionized gas, neutral gas, and dust, which emit various forms of radiation, including visible light, X-rays, and radio waves. These emissions are produced as the high-speed shock wave generated by the explosion interacts with the surrounding interstellar medium.
Over time, the supernova remnant expands and cools, gradually mixing its material with the surrounding interstellar medium. As a result, it enriches the interstellar medium with heavy elements, such as carbon, oxygen, iron, and other elements synthesized in the core of the massive star. These elements are then incorporated into subsequent generations of stars, planets, and other astronomical objects, contributing to the diversity of chemical compositions found throughout the universe.
Studying supernova remnants provides astronomers with valuable information about the life cycles of stars, the mechanisms behind supernova explosions, and the dynamics of interstellar matter. They serve as important laboratories for investigating the physical processes of particle acceleration, magnetic fields, and shock wave dynamics, contributing to our understanding of the universe's evolution.
Here you can learn more about supernova explosion
https://brainly.com/question/14018571#
#SPJ11
Part II – Measuring distant objects [24 points] Parallax as
explained in the pre-lab activity, is an interesting way of
measuring the distance of an object by how much it appears to move
when viewed
wZAnswer:d
Explanation:
efwdx
Parallax is a valuable technique used in astronomy to measure the distances of nearby celestial objects accurately. It relies on the apparent shift in an object's position when viewed from different locations on Earth's orbit and utilizes trigonometry to calculate the distance to the object.
Parallax is the apparent shift or change in the position of an object when viewed from different perspectives. This effect occurs when an observer changes their viewing angle. In astronomy, parallax is used to measure the distances of stars, planets, and other celestial objects.
The principle behind parallax is simple: Observers on Earth have slightly different views of a nearby object compared to a distant one, due to the difference in the observer's location on the planet. By measuring the apparent shift in the position of an object when viewed from two different points (such as two different locations on Earth), astronomers can calculate the object's distance.
The baseline used for measuring the parallax is the distance between the two observing points. In the case of celestial objects, the baseline is the distance between two points on the Earth's orbit, which are six months apart. This is because the Earth's position is significantly different after half a year due to its revolution around the Sun.
To measure parallax accurately, astronomers use specialized instruments like telescopes and cameras to observe the position of stars or other celestial objects at different times of the year. By comparing the apparent shifts in the object's position, they can determine the parallax angle. Using trigonometry, they can then calculate the distance to the object.
The formula used to calculate the distance to the object is:
Distance (in parsecs) = 1 / Parallax (in arcseconds)
That 1 parsec is approximately equal to 3.26 light-years.
To know more about Parallax
https://brainly.com/question/33870669
#SPJ2
1. (a) An object of mass 93.672 grams has a volume of 4.7 cm3. To the correct number of significant figures, determine the object's density in kg/m3. (10pts) (b) A small tennis ball is released (from rest) from a height of 10.0 m above the ground. How long does it take for the tennis ball to hit the ground? (8pts) (c) A small tennis ball is released (from rest) from a height of 10.0 m above the ground. Calculate the speed of the ball when it hits the ground. (7pts)
(a) An object of mass 93.672 grams has a volume of 4.7 cm³, it will take 1.42 seconds for the ball to hit the ground and its speed is 14 m/s when it hits the ground.
(a) An object of mass 93.672 grams has a volume of 4.7 cm³
To the correct number of significant figures, determine the object's density in kg/m³.
As given, the Mass of the object, m = 93.672 g
The volume of the object, v = 4.7 cm³ = 4.7 × 10⁻⁶ m³
Density, ρ = m/v = 93.672 g/4.7 × 10⁻⁶ m³
ρ = 19892468.09 kg/m³ ≈ 1.99 × 10⁷ kg/m³ (to 2 significant figures)
(b) A small tennis ball is released (from rest) from a height of 10.0 m above the ground.
How long does it take for the tennis ball to hit the ground?
Let's calculate using the kinematic equation, h = 1/2 gt² + vt
where, h = 10 m (height from which the ball is released)g = 9.8 m/s² (acceleration due to gravity)v = 0 m/s (initial velocity) and t = ?
Substitute all the values in the above kinematic equation
10 = 1/2 × 9.8 × t² + 0 × t10 = 4.9t²t² = 10/4.9t = √(10/4.9)t = 1.42
Therefore, it takes 1.42 seconds for the ball to hit the ground.
(c) A small tennis ball is released (from rest) from a height of 10.0 m above the ground.
Calculate the speed of the ball when it hits the ground. Using the kinematic equation, v² = u² + 2gh
where, u = 0 m/s (initial velocity)v = ? (velocity when the ball hits the ground)
g = 9.8 m/s² (acceleration due to gravity)
h = 10 m (height from which the ball is released)
Substitute all the values in the above kinematic equation
v² = 0² + 2 × 9.8 × 10v² = 196v = √196v = 14 m/s
Therefore, the speed of the ball, when it hits the ground, is 14 m/s.
If you need to learn more about volume click here:
https://brainly.com/question/27710307
#SPJ11
Use nodal analysis to find the voltage \( V_{1} \) in the circuit shown below.
In electrical engineering, nodal analysis is an approach for circuit analysis that entails applying KCL (Kirchhoff's Current Law) to each node in the circuit. This involves selecting a reference node and then identifying the voltage at each of the other nodes with respect to this reference.
Node voltage analysis is another name for nodal analysis. The nodal analysis for the circuit diagram shown below is as follows:
For Node A, starting with the KCL equation,
I1 + I3 = I2For Node B,I2 = I4 + I5
Taking the reference node as Node C, so,
V1 = 10V + V3
For Node C,
I3 + I4 = I5 + I6
Using the values from the above equations, the nodal analysis equation can be written as:
For Node A,
I1 + I3 - I2 = 0
For Node B,
-I4 - I5 + I2 = 0
For Node C,
I3 + I4 - I5 - I6 = 0
Node voltages can be determined by solving these equations. In order to solve the nodal analysis equations, use matrices which are a mathematical representation of a system of equations. In order to determine the node voltage, the KCL equation for each node must be formed.
The current entering the node is equal to the sum of the currents leaving the node. Solving the matrix equation, the voltage at Node A is calculated as follows:
V_1=V_3-
\frac{V_2}{2}=
\frac{10+5V_2+20}{3}-
\frac{V_2}{2}=
\frac{80-7V_2}{6}
Therefore, the voltage \(V_1\) in the given circuit is \(\frac{80-7V_2}{6}\).
To know more about approach visit :
https://brainly.com/question/30967234
#SPJ11
(co 1) (3 Marks) (b) Plot the graphs of following functions and thereby explain whether they are acceptable wave functions or not. a) ₁(x) = [log(x)], b) ₂(x) = e-rª. (co 1) (2 Marks) 2 (₂) Dorivo the orn sion for the Compton shift (2 Marka)
The given function satisfies the normalization criteria. So it is an acceptable wave function. ∫₀^∞ e^-2x dx < ∞. The shift in wavelength of the photon is given by Compton shift λ - λ₀ = (h/mec)(1 - cos θ).
a) Plot the graphs of the following functions and explain whether they are acceptable wave functions or not: ₁(x) = [log(x)] and ₂(x) = e-rª.
(i) For the function ₁(x) = [log(x)]:
The given wave function is not an acceptable wave function as it does not meet the normalization criteria. A wave function is considered an acceptable wave function if it satisfies the normalization criteria, that is, the integral of its modulus square from -∞ to ∞ should be equal to 1.
i.e. ∫₀¹ [log(x)]² dx < ∞ As we see here the limit of integration has 0 which is not correct so this cannot be a proper wave function(
ii) For the function ₂(x) = e-rª:
The given function satisfies the normalization criteria. So it is an acceptable wave function. ∫₀^∞ e^-2x dx < ∞
(b) Derive the expression for the Compton shift:
The Compton effect or Compton scattering is the inelastic scattering of a photon by an electron. The shift in wavelength of the photon is given by Compton shift
λ - λ₀ = (h/mec)(1 - cos θ)
Where λ₀ = wavelength of the incident photon
λ = wavelength of the scattered photon
θ = angle between the incident photon and the scattered photon
h = Planck's constant
me = mass of the electron
c = speed of light
To learn more about Compton shift:
https://brainly.com/question/29306626
#SPJ11
Scientific Notation Convert the following numbers to scientific notation. Be sure to include the correct number of significant figures Pay attention to rules for trailing zeros in whole numbers vs. trailing zeros in decimal numbers 68,200 93,000,000 82 3.69 0.000085 0.0079540 0.063000 0.00000000510 Convert the following numbers into decimal notation 4.84x104 1.250x10 13x10 621X10 Combining units 1. What is the metric unit for speed? a. If you travel 41 meters every 18 seconds, what is your speed? b. If you travel at a constant speed of 6 , how far can you travel in 9 seconds? 1 2 What two measurements do you need to multiply, divide, add, or subtract to find the area of a surface? 3. What three measurements do you need to multiply, divide, add, or subtract to find the volume of a 3- dimensional object? 4. Density is defined as mass divided by volume. What is the standard metric unit for density? a. I measure the mass of a cube to be 0.68 kg and the volume to be 0.45 m? What is the density of the cube? b. Would this cube float in water? The density of water is 1000 Objects float if they are less dense than water and they sink if they are denser than water c. What is the length of each side of my cube? (Remember that a cube is the same length on cach side) 2 5. Momentum is defined as mass times vclocity. What is the standard metric unit for momentum? If a 410 kg car is traveling at 35, what is its momentum? b. If I toss an apple across the room with a velocity of 14 it will have a momentum of 2.1 kg What is the mass of the apple in grams? 6. Propose some useful SI units for deciding what volume of gas is added to your cars tank per some amount of time? (i.e. how fast does gasoline come out of the pump?) The units for volume of a regular solid (one that we can easily measure the length of each side with a ruler) are often different than the unit for volume for a liquid. What are cach of these units? b. What is the ratio of these two units? (Find a conversion factor to change from one to the other) 3 Unit Conversion Convert 18 mg to kg Convert 0,4 mºto Convert 36 km to min year Convert 65 miles to hour Convert 2000 Calories (the suggested daily caloric intake for most individuals) to Joules. There are 4.184 Joules in one calorie and 1000 calories in one food Calorie (difference is one is capital "C" and other is lower case "e")
The metric unit for speed is meters per second (m/s).
b. To calculate the distance traveled by an object at a constant speed of 6 m/s in 9 seconds, we use the formula; distance = speed x time = 6 m/s x 9 s = 54 meters.
Measurements needed to find the area of a surface: The three measurements needed to find the volume of a 3-dimensional object are length, width, and height.
Standard Metric Unit for Density: The standard metric unit for density is kilograms per cubic meter (kg/m³).
a. Using the formula, Density = Mass/VolumeDensity = 0.68 kg/0.45 m³Density = 1.51 kg/m³
b. Since the density of the cube is less than that of water, then the cube will float on water. Length of each side of a cube: The volume of a cube = length x width x heightVolume of a cube = side³0.45 m³ = side³Side = cube root of 0.45Side ≈ 0.769 m.
Momentum: Momentum is defined as the product of mass and velocity.
The standard metric unit for momentum is kilogram-meter per second (kg·m/s).
a. Using the formula, Momentum = Mass x VelocityMomentum = 410 kg x 35 m/sMomentum = 14350 kg·m/s
b. Using the formula, Momentum = Mass x VelocityMass = Momentum/VelocityMass = 2.1 kg·m/s / 14 m/sMass = 0.15 kg or 150 grams
Useful SI Units for deciding what volume of gas is added to your car's tank per some amount of time: One useful SI unit for deciding what volume of gas is added to your car's tank per some amount of time is cubic meters per second (m³/s).
Units of Volume: For a regular solid, the unit of volume is cubic meters (m³) while for a liquid, the unit of volume is liter (L). The ratio of the two units of volume:1 L = 10^-3 m³
Therefore, the ratio of the two units of volume is;1 L/ 10^-3 m³ or 10^3 m³/L.
Unit Conversion:18 mg = 0.018 kg0.4 m³ = 400 L36 km/year = 0.00061 km/min65 miles/hour = 104.61 km/hour (1 mile = 1.609 km)2000 Cal = 8,368 kJ (1 Cal = 4.184 kJ)
To know more about momentum please refer to:
https://brainly.com/question/1042017
#SPJ11
Hw.2 Define in AC. System. Cycle, Periodic &imme, Frequency, Amplitude. Phase. 2. An alternating Voltage given by e=150 Sin 100 T is applied to a circult which offers a resistance of 502, Find the rms and Peak Values of this Current.
AC System The AC system stands for alternating current system, in which the current periodically changes its magnitude and direction. AC is widely used in all forms of electrical applications. It is considered as an alternating voltage or current that periodically changes its direction and magnitude.
Cycle means the completion of one full period of the wave. It measures the distance between two consecutive points of a periodic wave. When the wave travels from zero to its maximum value and returns to zero again in the same direction, the cycle is completed. Frequency The number of completed cycles of the alternating voltage or current in one second is called frequency. The unit of frequency is Hertz (Hz).
Imme stands for instantaneous value, which is the value of the voltage or current at any instant in time. Amplitude refers to the maximum value of the alternating voltage or current. The unit of amplitude is volt for voltage and ampere for current. Phase refers to the point of the wave at a particular time. It is measured in degrees or radians.
To know more about current visit:
https://brainly.com/question/31686728
#SPJ11
The hydrodynamic friction regime: Select one: a. Increases the engine friction due to oil film O b. Is not good for engine performance Oc None of the options O d. Reduces metal to metal friction due to oil film
The hydrodynamic friction regime is the state when there is a reduction of metal-to-metal friction between the parts of an engine due to the formation of an oil film. This regime enhances the engine's performance and efficiency while reducing wear and tear.
In this regime, the rotating parts of the engine float on a cushion of oil, reducing the direct contact between the metal surfaces and, thus, reducing friction. As a result, the engine operates with minimal wear and tear, improving its overall performance and efficiency.
This regime is considered beneficial for engines as it extends the lifespan of engine components and increases fuel efficiency. Therefore, option d. "Reduces metal-to-metal friction due to oil film" is the correct answer.
To know more about friction visit:
https://brainly.com/question/28356847
#SPJ11
This is electronic system packaging subject. Please provide detailed and clear answer so that i can understand. Writing should be neat if handwritten. Thx in advance.
(b) Explain the wedge bonding technique. (c) What is the advantage of ball bonding over wedge bonding? (d) State the reason why aluminum wire bonding is preferred over gold wire bonding? (e) List steps of the flip-chip process.
(b) Wedge bonding technique: Wedge bonding is a bonding technique used to wire semiconductor devices for interconnection purposes. In this technique, a small wedge-shaped tool is used to push an aluminum or gold wire onto a bonding surface.
The wire is then thermosonically bonded (heat and vibration) to the surface. The result is a wire bond that holds together two or more surfaces or electronic components.
(c) Advantage of ball bonding over wedge bonding: Ball bonding is faster than wedge bonding because it requires less time to form a ball than it takes to shape a wedge. The process of ball bonding allows for a more significant degree of automation than wedge bonding, which requires more manual labor. Ball bonding also provides a stronger, more reliable bond than wedge bonding.
(d) Reason for preferring aluminum wire bonding over gold wire bonding: Aluminum wire bonding is preferred over gold wire bonding because aluminum wire is more abundant and cheaper than gold wire. Aluminum is also an excellent conductor of electricity and provides excellent electrical properties for electronic devices.
(e) Steps of flip-chip process:
The flip-chip process involves the following steps:
1. Die Preparation: This process involves preparing the die for bonding by cleaning and inspecting the surface.
2. Bump Deposition: The bump deposition process involves the deposition of solder or gold bumps on the surface of the die.
3. Wafer Preparation: In this step, the wafer is cleaned, inspected, and thinned.
4. Align and Place: In this step, the die is aligned and placed on the substrate.
5. Reflow: The reflow process involves heating the assembly to a temperature that melts the solder bumps and fuses the die to the substrate.
6. Underfill: In this step, an underfill material is applied to protect the solder bumps and improve the mechanical and thermal properties of the flip-chip assembly.
To learn more about bonding visit;
https://brainly.com/question/31994049
#SPJ11
Section 21.5. The Force on a Current in a Magnetic Field 2. A horizontal wire of length \( 0.53 \mathrm{~m} \), carrying a current of \( 7.5 \mathrm{~A} \), is placed in a uniform external magnetic fi
The magnitude of the external magnetic field is found to be approximately 1.01 T, if a wire of length 0.53 m, carrying a current of 7.5 A, is placed in a uniform external magnetic field.
To determine the magnitude of the external magnetic field, we can use the formula for the magnetic force experienced by a current-carrying wire in a magnetic field:
F = BIL sinθ,
where F is the magnetic force, B is the magnitude of the magnetic field, I is the current, L is the length of the wire, and θ is the angle between the wire and the magnetic field.
In this instance, the following details are provided:
L = 0.53 m is the wire's length.
Current, I = 7.5 A
Angle, θ = 19°
Magnetic force, F = 4.4 x 10⁽⁻³⁾ N
We can rearrange the formula to solve for the magnetic field, B:
B = F / (IL sinθ).
Plugging in the given values:
B = (4.4 x 10⁽⁻³⁾N) / (7.5 A * 0.53 m * sin(19°)).
Evaluating this expression gives:
B = 1.01 T (tesla).
Therefore, the magnitude of the external magnetic field is approximately 1.01 T.
To know more about magnetic field refer here
brainly.com/question/30331791
#SPJ11
Complete Question : Complete Question : A horizontal wire of length 0.53 m, carrying a current of 7.5 A, is placed in a uniform external magnetic field.There is no magnetic force acting on the wire while it is horizontal. The wire receives a magnetic force of 4.4 x 10-3 N when it is inclined upward at an angle of 19°. Determine the magnitude of the external magnetic field.
