An object is shot upwards, from the ground, with an initial velocity of 120
m/s. How high will it be after 4.0s?
480 m
402 m
380 m
302 m

The light source and aperture are most important in determining the resolution of the microscope, as the resolution of the microscope is determined by the cone of light entering the lens, the refractive index, and the wavelength of the light.

The most important factor in determining the resolution of a microscope is the numerical aperture (NA) of the objective lens. The higher the NA, the higher the resolution. However, other factors also play a role. The numerical aperture of the condenser that forms the beam of light that illuminates the object on the slide should match the numerical aperture of the objective lens (or at least not be much smaller). Another factor is the refractive index of the medium between the objective lens and the slide. For low magnification lenses (low NA) this medium is usually air. Air has a refractive index of 1.0 (for the wavelengths of light used in microscopy).

Learn more about Microscope

brainly.com/question/9099698

#SPJ4

1 Nm (Newton-meter) is a unit of torque, which is a measure of the twisting force applied to an object, such as a shaft or a nut.

It is defined as the amount of force required to rotate an object around an axis by one radian (about 57.3 degrees). In other words, one Nm of torque is equal to the force of one Newton (N) acting at a distance of one meter (m) from the axis of rotation. It is a common unit of torque used in the field of mechanics and engineering, particularly in the design and operation of machines and vehicles. Torque is also related to the angular velocity of an object, and the rotational energy, which is calculated by multiplying the torque by the angle through which the object rotates. In a mechanical system, torque is often controlled by adjusting the position of the mechanical load or by applying a force to a lever to generate torque.

To know more about torque please refer: https://brainly.com/question/29024338

#SPJ4

About 2,900 kilometers (1,802 miles) beneath the surface of the Earth, the core can be located.

Distance is a measurement of how far apart two things or points are, either numerically or occasionally qualitatively. Distance can refer to a physical length in physics or to an estimate based on other factors in common usage.

Furthermore, it is the sum of an object's movements, regardless of direction. Distance can be defined as the amount of space an object has covered, regardless of its starting or ending position.

Learn more about distance here:

https://brainly.com/question/2854969

#SPJ1

The full-load current of a 25-horsepower, 480-volt, 3-phase, squirrel-cage induction motor is 12.7 A.

To calculate the full-load current of a 25 horsepower, 480-volt, 3-phase, squirrel-cage induction motor, you can use the formula:

Full-load current (I) = (Horsepower * 746) / (Voltage * 1.73 * Power factor)

where 1.73 is the square root of 3, which accounts for the 3-phase power and Power Factor is assumed to be 0.8

Plugging in the given values, we get:

I = (25 * 746) / (480 * 1.73 * 0.8)

I = 25746/(4801.73*0.8)

I = 25746/(4803.07)

I = 25*746/1478.4

I = 25*0.508

I = 12.7 A

Therefore, the full-load current of a 25-horsepower, 480-volt, 3-phase, squirrel-cage induction motor is 12.7 A.

It's worth noting that this is just an approximation and the current can vary depending on the motor design, the load and the power factor.

Learn more about full-load current here:

https://brainly.com/question/30001500

#SPJ4

A collision that is fully elastic is one where there is no kinetic energy lost during the contact. In an inelastic collision, a proportion of the energy is converted into another kind of energy during the contact.

In elastic collisions, kinetic energy and momentum are both conserved. Consider two similar trolleys that are moving in the same direction at the same pace. With no loss of speed, they collide and bounce off one another. Since no power has been lost, this collision is fully elastic.

photo of A description of completely elastic collision

When a system's maximal quantity of kinetic energy is equal to zero, a relatively inelastic collision takes place.

to know more about  collision visite:

https://brainly.in/question/23392647

#SPJ4

A collision that is fully elastic is one where there is no kinetic energy lost during the contact. In an inelastic collision, a proportion of the energy is converted into another kind of energy during the contact.

In elastic collisions, kinetic energy and momentum are both conserved. Consider two similar trolleys that are moving in the same direction at the same pace. With no loss of speed, they collide and bounce off one another. Since no power has been lost, this collision is fully elastic.

photo of A description of completely elastic collision

When a system's maximal quantity of kinetic energy is equal to zero, a relatively inelastic collision takes place.

To know more about  collision visite:

https://brainly.com/question/25945297

#SPJ1

The following forces govern the motion of common objects that is gravity, friction, and applied forces.

Every thing was pulled downward by gravity, which prevented them from rising into the air. Every movement is subject to forces from friction in the opposite direction. Applied forces dictate how objects move according on the purpose of people who apply them.

The electromagnetic force, weak and strong nuclear forces, gravitational force, and other fundamental forces all play important roles in the cosmos. However, the main factors of relevance when it comes to the motion of common things are gravity, friction, and applied force.

know more about force here

https://brainly.com/question/13191643#

#SPJ4

Newton's first law states that an object will continue to move unless a force acts on it. The second law states that force equals mass times acceleration.

Newton's first law, also known as the law of inertia, states that a body at rest will remain at rest and a body in motion will continue to move at a constant speed unless acted upon by an external force. I'm here. This means that the object will maintain its current state of motion unless a net force acts on it.

Newton's Second Law, also known as the Law of Acceleration or the Law of Force, states that the acceleration of a body is directly proportional to the net force acting on it and inversely proportional to its mass. This means that the force on an object is equal to its mass multiplied by its acceleration.

Newton's Third Law, also known as the "Law of Action and Reaction" or "The Law of Reciprocity", states that for all actions there are equal and opposite reactions. This means that when one object exerts a force on her second object, the second object exerts an equal and opposite force on the first object.

To learn more about Newton's 1st 2nd and 3rd laws  at

https://brainly.com/question/21095431?referrer=searchResults

#SPJ4

Answer:

When you kick a football and it moves from one place to another

Explanation:

This means that the unbalanced force troops are acting upon it. The ball moves from one place to another after it's kicked. This is an example of an unbalanced force

Torque is calculated using the formula, τ = r × F, where, r is the perpendicular distance, F is the force.

It is also described as the cross product of distance vector and force vector. Mathematically, τ = r × F = r F sinθ, where, θ is the angle between r and F.

For example, a force is applied to a particle free to rotate about a fixed axis. Force is shown divided into perpendicular and parallel components. Torque is pointed outward from the page and has the magnitude

τ = r F sinθ

Newton-meters, sometimes known as N.m, are the SI units for torque. Although these units are the same as joules, torque isn't considered to be work or energy, therefore N.m should be used instead.

To know more about torque:

brainly.com/question/30187149

#SPJ4

The force applied by the breaks on the bus traveling at 26.6m/s will be 34,546 Newtons.

First we have to calculate the negative acceleration applied by the breaks. We know that [tex]v^{2} - u=2as^{2}[/tex], where V is the final velocity, u is initial velocity, s is the displacement and a is the acceleration Therefore, by putting the given values, we get :

⇒(0 x 0)- (26.6 x 26.6)=2 x 47 x a

⇒-[tex]\frac{706.56}{2*47}[/tex]

⇒-7.51

∴ Acceleration applied by the breaks is -7.51 [tex]ms^{2}[/tex]

Now, by F=ma, we can calculate force as we already know the mass of the bus. Therefore,

⇒m x a

⇒4600kg x (-7.51)ms-2

⇒34,546 Newtons will be the answer.

Learn more about Force and motion here,

https://brainly.com/question/28875770

Newton's first law, also known as the law of inertia, states that an object at rest will remain at rest, and an object in motion will remain in motion with a constant velocity unless acted upon by an external force.

In simple terms, it says that an object will remain in its current state of motion unless acted upon by a net force.

This means that if an object is moving in a straight line at a constant speed, it will continue to move in that way unless something changes its motion.

Similarly, if an object is at rest, it will stay at rest unless something applies a force to it. This law is fundamental in understanding the principles of motion and forms the basis for many other laws of physics.

To learn more about the law of inertia at

https://brainly.com/question/18128368?referrer=searchResults

#SPJ4

She puts her skis in with less pressure because her skis have a larger surface area than her shoes do. Thus, Ingrid doesn't need to ski to travel across the snow.

The pressure on the snow is reduced by the size of the skis. The pressure on the snow is lessened by the larger surface area of skis. This prevents the skis from burying themselves too deeply in the snow.

Pressure is defined as the force perpendicularly applied to an object's surface divided by the area across which it is distributed. Gauge pressure is the pressure in relation to the air pressure outside. To express pressure, various units are employed.

Ingrid can move over the snow without skiing because there is less pressure when she puts her skis on compared to her shoes.

The question is incomplete. The complete question is 'Ingrid lives in a cold country that sometimes gets lots of snow. When that happens , people can enjoy the sport of skiing. Ingrid goes outside to see if the snow is fit for skiing. She sinks into the snow , but when she puts her skis in, she can move over the snow without skiing. Why?'

To know more about skiing:

https://brainly.com/question/30283347

#SPJ4

Jamal should move the car from Point A to Point B,which will increase its potential energy.

The energy that an object has stored in it due to its position or configuration is known as potential energy. It is the energy an object possesses due to its position relative to other objects, stresses within itself, its electric charge, or other factors. The ability of an object to do work by virtue of its position is called potential energy. Examples of potential energy include the energy stored in a stretched elastic band or a raised weight

Jamal should move the car from Point A to Point B. This movement will result in the largest increase in potential energy because Point B is higher than Point A, and thus the car will gain potential energy as it moves to a higher elevation. The magnetic force that will act on the vehicle is the magnetic repulsion force. This force is created by the magnetic fields of the two cars, which act to push the cars apart. This force is what causes the car to move up the incline and gain potential energy.

To learn more about potential energy

https://brainly.com/question/24933254

#SPJ4

The torque multiplication ratio of a basic torque converter would be around 2.5:1. The most important thing to keep in mind is that all torque converters which are in proper working order increase torque while initiating initial acceleration.

The moment the vehicle first begins to move, the torque multiplier reaches its maximum. The torque multiplication falls off as speed rises. Torque multiplication virtually disappears as the impeller as well as turbine speeds become close to one another.

Force times distance, or T2L2M, would be the dimension of torque. The official SI literature advises using the unit newton-meter (Nm) as well as don't ever the joule, despite the fact that these fundamental dimensions were identical to those used for energy and work. The appropriate abbreviation for the newton meter is Nm.

To know more about  torque multiplication

https://brainly.com/question/28813044

#SPJ4

change in momentum during this time is 2166.71 kg m/s.

To find the change in momentum during this time, we can use the equation for momentum, which is:

momentum = mass x velocity

We can also use the equation for acceleration:

       a = (vf - vi) / t

Where "a" is acceleration, "vf" is final velocity, "vi" is initial velocity and "t" is time.

We are given that the car's initial velocity is 18 m/s east, the acceleration is 1 m/s2, and the time is 1.57 s. We can use these values to find the car's final velocity:

vf = vi + (a x t)

vf = 18 + (1 x 1.57)

vf = 19.57 m/s east

Now that we know the final velocity of the car, we can use the equation for momentum to find the change in momentum:

change in momentum = mass x (vf - vi).

change in momentum = 1383 x (19.57 - 18).

change in momentum = 1383 x 1.57.

change in momentum = 2166.71 kg m/s.

So, during this 1.57s of time, the car's momentum changes from 18m/s to 19.57m/s east and total change in momentum is 2166.71 kg m/s.

To learn more about change in momentum visit the link:

https://brainly.com/question/2370461

The 50 kg mass on 4 m2  on will exert more pressure.

Pressure is described as the force applied perpendicular to the surface of an object per unit area over which that force is distributed.

Mathematically pressure = force / area

From Newton's second law

force = mass x acceleration where Acceleration due to gravity = 9.8m/s²

Comparing both pressures where

P1 = 100x 9.8 / 10

p1 = 100 pa

p2 = 50 x  9.8/ 4

p2 = 125 pa

Therefore The 50 kg mass on 4 m2  on will exert more pressure since it exerts more pressure.

Learn more about pressure at: https://brainly.com/question/28012687

#SPJ1

a) To find the speed of the signal in water, we can use the equation:

Speed = Wavelength x Frequency

Where Wavelength is given as 1.5 mm and Frequency is given as 1 x 10^6 Hz.

Speed = 1.5 x 10^-3 m x 10^6 Hz = 1.5 x 10^3 m/s

So the speed of the signal in water is 1.5 x 10^3 m/s

b) To find the period in water, we can use the equation:

Period = 1 / Frequency

Where Frequency is given as 1 x 10^6 Hz

Period = 1 / (1 x 10^6) s = 1 x 10^-6 s = 1 microsecond

So the period of the signal in water is 1 microsecond

c) The speed of sound in air is approximately 343 m/s. Since the frequency of the signal remains constant and the speed of sound in air is different than the speed of sound in water, the wavelength of the signal will also be different. However, since the period is inversely proportional to the frequency and is independent of the medium, the period of the signal in air will be the same as in water, which is 1 microsecond.

Answer:

[tex]m=\frac{w}{g}[/tex]

Explanation:

Since w=mg we can find the formula for mass

A automobile with a mass of 1000 kg and a speed of 30 m/s has kinetic energy equal 450,000 J.

If an object's mass increases, so will its kinetic energy. The object's speed is given by v. The aforementioned connection demonstrates that an object's kinetic energy is directly proportional to the sum of its mass and velocity.

Possible explanation: Because kinetic energy and speed are closely correlated, an object's kinetic energy increases as its speed increases. The nonlinear (square) proportional relationship (KE v2) between kinetic energy and speed 1. As an object's speed doubles, its kinetic energy grows four times. 2. As the object's speed is halved, the kinetic energy falls by a factor of four.

K.E: 1/2 *m * v^2

K.E= 1/2* 1000* 30^2

K.E = 450,000 J

Learn more about kinetic energy Visit: brainly.com/question/25959744

#SPJ4

The two factors upon which torque depends are the magnitude of force and the perpendicular distance from the point to the line of action of force.

It is also called as moment of force. The standard units of torque are N.m.

Mathematically, torque is written as, τ = r × F.

where, τ is torque, r is perpendicular distance, F is force.

Three factors affect how much torque a rigid body produces. the applied force, the vector of the lever arm that connects the torque measurement point to the application point of the force, and the angle formed by these vectors. τ = r F sinθ  

To know more about torque:

https://brainly.com/question/28057297

#SPJ4

The Tenth Amendment to the Constitution states that "The powers not delegated to the United States by the Constitution, nor prohibited by it to the states, are reserved to the states or to the people." This amendment is a source of law that limits the powers of the federal government and reserves certain powers to the states or the people. It is a principle of federalism, which divides the power between the federal government and the state governments. The powers that are not delegated to the federal government are left to the states or the people to decide.

Every object falling freely accelerates at roughly the same rate near the surface of the earth. A g signifies this acceleration. The earth's center is where it is headed downward.

Constant g = 9.8 m/s^2 downward acceleration is experienced by objects in free fall. Newton's second law of motion, Force = Mass * Acceleration, can be used to describe the motion of an object falling (a).

We can use a little mathematics to find the object's acceleration as a function of the object's mass and the net external force (a = F / m). What is meant by acceleration: a measure of how quickly a speed changes over time. Because it has both a magnitude and a direction, acceleration is a vector quantity.

Learn more about acceleration Visit: brainly.com/question/933224

#SPJ4

Newton, There will be mass is 4.080, So acceleration will be equals to 2.50 m per cent in the square.

The crate’s acceleration is 0 since its velocity is constant. As a result, the total of the forces equals zero. Because the forces resist each other, the lifting force must be equal to the weight of the item. The magnitude of the upward force on the container is thus 490.5 Newtons.

The amount of force is expressed as mass times length times time squared. The most common metric unit is the newton (N), which is defined as one kilogram times one meter over one second squared. Magnitude – Distance Formula – used to calculate the connection between apparent magnitude, absolute magnitude, and object distance.

To learn more about magnitude of the force to refer:

https://brainly.com/question/30033702

#SPJ1

Momentum is defined as the product of mass and velocity units. We can use the simple formula P=mv to calculate momentum, where P is the momentum.

It is measured by "mass velocity," because momentum depends on velocity, and it also depends on the direction of the body's motion. Momentum is a vector quantity because velocity is a vector and mass is a scalar quantity. Momentum equals mass multiplied by velocity. Momentum is defined as "mass moving." Because all objects have mass, if an object moves, it has momentum - its mass is in motion. Momentum is the amount of motion of a moving body, calculated as the product of its mass and velocity. Its formula is mass velocity.

Here,

The product of mass and velocity units is defined as momentum. To calculate momentum, we can use the simple formula P=mv, where P is the momentum.

To know more about momentum,

https://brainly.com/question/22418297

#SPJ4

The information given on the X-axis of the graph attached is the years from 1920-2005 (option B).

A graph in mathematics or statistics is a data chart (graphical representation of data) intended to illustrate the relationship between a set (or sets) of numbers (quantities, measurements or indicative numbers) and a reference set.

A graph consists of two axes namely; X-axis and Y-axis. The x-axis on a graph is usually drawn left to right and usually shows the range of values of an independent variable.

On the other hand, the Y-axis is the axis on a graph that is usually drawn from bottom to top and usually shows the range of values of variable dependent on one other variable.

Therefore, according to the graph illustrated above, the x-axis shows the years from 1920-2005.

Learn more about x-axis of a graph at: https://brainly.com/question/30110751

#SPJ1

A pendulum bob's kinetic energy is greatest at the bottom of the pendulum. If kinetic energy is largest near the bottom of the pendulum, potential energy is lowest there.

An active pendulum has the most kinetic energy at the bottom of its swing when the weight moves fastest. An ideal pendulum system always contains a steady amount of mechanical energy, the sum of kinetic and potential energy.

When the pendulum swings, it moves back and forth between its equilibrium or rest positions. The pendulum has kinetic energy except at the tipping point of the system where the pendulum velocity is zero. Pendulums also have potential energy associated with their height from the equilibrium position.

As the pendulum swings, potential energy changes to kinetic energy, back to potential energy, back to kinetic energy, and so on.

For more information on kinetic energy, visit :

https://brainly.com/question/27022057

#SPJ4

88 kilometers northeast of Portland, amid the Cascade Mountains, is the stratovolcano Mount St. Helens. Since the volcano only developed about 40,000 years ago, it is a rather recent formation. It is the Cascade Range's most active, though.

The Cascade Mountain Range is a part of the Pacific Ocean's massive Ring of Fire, which frequently experiences powerful earthquakes and volcanic eruptions.

Through the state of Washington, the mountain range runs from British Columbia (Canada) to California.

The name of the summit was given by George Vancouver, a British navigator for the Royal Navy who discovered North America's Pacific Coast, according to the United States Geology Survey (USGS), in honor of Alleyne FitzHerbert, a British diplomat and a friend of his.

Therefore, 88 kilometers northeast of Portland, amid the Cascade Mountains, is the stratovolcano Mount St. Helens. Since the volcano only developed about 40,000 years ago, it is a rather recent formation. It is the Cascade Range's most active, though.

To learn more about volcanic eruption, refer to the link:

https://brainly.com/question/11945125

#SPJ1

Answer:

[tex]a=3.6\frac{m}{s^2}[/tex]

Explanation:

First, use kinematic equation #3: [tex]\Delta x=v_it+\frac{1}{2}at^2[/tex].  For this problem, let

[tex]\Delta x=48m\\v_i=0.0\frac{m}{s}\\t=5.2s[/tex]

Next, rewrite the kinematic equation to solve for acceleration (a):

[tex]a=2(\frac{\Delta x-v_it}{t^2})[/tex]

Last, put in the given values on the right side of the equation for acceleration and solve:

[tex]a=2(\frac{(48m)-[0.0\frac{m}{s}(5.2s)]}{(5.2s)^2})\\a=2(\frac{48m}{27.04s^2})\\a=3.55\frac{m}{s^2}[/tex]

Relative Centrifugal Force or g force is calculate with the formula-

g force (RCF)= (RPM)² x 1.118 x 10⁻⁵ x r where, r is the radius .

The relative centrifugal force, or g force, is the radial force generated by the spinning rotor in relation to the gravitational force of the Earth. The g force acting on particles is proportional to the rotational speed measured in revolutions per minute (RPM).

Increasing the rotational speed by a factor of four increases the centrifugal force. The centrifugal force increases with distance from the axis of rotation. When choosing the right centrifuge, these two parameters are crucial.

The RCF or g force is proportional to the rotational speed in RPM and the particle distance from the centre of rotation. When the rotational speed is given in RPM and the distance (r) is given in centimetres.

Learn more about centrifugal force here:

https://brainly.com/question/17167298

#SPJ4