An observer on Earth sees rocket 1 leave Earth and travel toward Planet X at 0.3c. The observer on Earth also sees that Planet X is stationary. An observer on Planet X sees rocket 2 travel toward Earth at 0.4c. What is the speed of rocket 1 according to an observer on rocket 2?

Solution :

a). B at the center :

     [tex]$=\frac{u\times I}{2R}$[/tex]

Here, one of the current is in the clockwise direction and therefore, the other current must be in the clockwise direction in order to cancel out the effect of the magnetic field that is produced by the other.

Therefore, the answer is ANTICLOCKWISE or COUNTERCLOCKWISE

b). Also, the sum of the fields must be zero.

Therefore,

[tex]$\left(\frac{u\times I_1}{2R_1}\right) + \left(\frac{u\times I_2}{2R_2}\right) = 0$[/tex]

So,

[tex]$\frac{I_1}{d_1}= \frac{I_2}{d_2}$[/tex]

[tex]$=\frac{16}{21}=\frac{I_2}{32}$[/tex]

[tex]$I_2=24.38 $[/tex] A

Therefore, the current in the outer wire is 24.38 ampere.

Answer:

(a) counter clockwise

(b) 24.38 A

Explanation:

inner diameter, d = 21 cm

inner radius, r = 10.5 cm

Current in inner loop, I = 16 A clock wise

Outer diameter, D = 32 cm

Outer radius, R = 16 cm

(a) The magnetic filed due to the inner wire is inwards to the plane of paper. According to the Maxwell's right hand thumb rule, the direction of magnetic field in outer wire should be outwards so that the net magnetic field is zero at the center.

So, the direction of current in outer wire is counter clock wise in direction.

(b) Let the current in outer wire is I'.

The magnetic field due to the inner wire is balanced by the magnetic field due to the outer wire.

[tex]\frac{ \mu 0}{4\pi}\times \frac{2 I}{r}=\frac{\mu 0}{4\pi}\times \frac{2 I'}{R}\\\frac{16}{10.5}=\frac{I'}{16}\\\\I' = 24.38 A[/tex]

Answer:

Un objeto se encuentra en equilibrio físico si la fuerza neta que se le aplica es igual a 0.

En este caso solo se aplican fuerzas en el eje horizontal, por lo que las podremos sumar directamente.

La persona A aplica una fuerza:

Fa = -3N

La persona B aplica una fuerza:

Fb = 5N

La persona C aplica una fuerza Fc, la cual aún no conocemos.

Pero sabemos que la caja está en equilibrio físico, por lo que:

Fa + Fb + Fc = 0N

reemplazando los valores que conocemos, obtenemos:

-3N + 5N + Fc = 0N

Ahora podemos resolver esto para Fc, la fuerza que aplica la persona C.

Fc = 0N + 3N - 5N

Fc = -2N

Podemos concluir que la persona C aplica una fuerza horizontal de -2N

Answer:

A. When moving towards a high pressure center the pressure values ​​increase in the equipment

B. This area is called high prison since the weight of the atmosphere on top is maximum

Explanation:

A) A high atmospheric pressure system is an area where the pressure is increasing the maximum value is close to 107 Kpa, the other side as low pressure can have small values ​​85.5 kPa.

When moving towards a high pressure center the pressure values ​​increase in the equipment

B) This area is called high prison since the weight of the atmosphere on top is maximum

in general they are areas of good weather

Answer:

[tex]\boxed {\boxed {\sf 5.22 \ m}}[/tex]

Explanation:

Gravitational potential energy is the energy an object possesses due to its position. It is calculated using the following formula:

[tex]E_P=mgh[/tex]

Where m is the mass, g is the acceleration due to gravity, and h is the height.

The object has a mass of 8.72 kilograms. Assuming this occurs on Earth, the acceleration due to gravity is 9.8 meters per second squared. The object gains 446 Joules of potential energy.

Let's convert the units of Joules. This makes the process of canceling units simpler later on. 1 Joule is equal to 1 kilogram meter squared per second squared. The object gains 446 J, which is equal to 446 kg *m²/s².

Substitute the values into the formula.

[tex]446 \ kg*m^2/s^2 = 8.72 \ kg * 9.8 \ m/s^2 *h[/tex]

Multiply on the right side of the equation.

[tex]446 \ kg*m^2/s^2 = 85.456 kg*m/s^2 *h[/tex]

We are solving for the height, so we must isolate the variable h. It is being multiplied by 85.456 kg*m/s². The inverse operation of multiplication is division, so we divide both sides by this value.

[tex]\frac{ 446 \ kg*m^2/s^2}{85.456 kg*m/s^2} = \frac{85.456 kg*m/s^2 *h}{85.456 kg*m/s^2}[/tex]

[tex]\frac{ 446 \ kg*m^2/s^2}{85.456 kg*m/s^2} =h[/tex]

The units of kg*m/s² cancel, leaving meters as our unit.

[tex]\frac{ 446 }{85.456 } \ m =h[/tex]

[tex]5.2190601011 \ m =h[/tex]

The original measurements of mass and potential energy have 3 significant figures, so our answer must have the same.

For the number we calculated, that is the hundredths place. The 9 in the thousandths place to the right tells us to round the 1 up to a 2.

[tex]5.22 \ m \approx h[/tex]

The object was lifted to a height of approximately 5.22 meters.

Answer:

24m

Explanation:

you can use the formula

s=ut+1/2at²

s=0+1/2(3)(4)²

=1/2(3)(8)

=24m

I hope this helps

Answer:

"the ratio of increase in the volume of a solid per degree rise of temperature to its initial volume" -web

Explanation:

tbh up above ✅

Answer:

cubic meter

Explanation:

Increase in volume of a body on heating is referred to as volumetric expansion or cubical expansion

Answer:

Work Done= 3150J

Power= 1.75W

Explanation:

Work Done= Force x the distance travelled in the direction of the force (W= f x d)

Weight is a force, i think the qn. stated it wrongly, it should be 70N not 70kg.

Work Done= 70 x 45

=3150J

Power= Work Done/Time

=3150/(30x60)

*convert minutes to seconds since the S.I. unit of Power is joules/seconds(J/s) or watts(W)

=1.75W

Explanation:

The equivalent capacitance of capacitors in parallel can be determined as

[tex]C_{eq} = C_1 + C_2 + C_3[/tex]

[tex]\:\:\:\:\:= 40\:\text{F} + 10\:\text{F} + 50\:\text{F} = 100\:\text{F}[/tex]

Answer:

gshshs

Explanation:

hshsksksksbsbbshd

Explanation:

Conservation of momentum, general law of physics according to which the quantity called momentum that characterizes motion never changes in an isolated collection of objects; that is, the total momentum of a system remains constant

Explanation:

kE =1/2mv²

1/2(0.6×(3m/s)²

1/2(0.6×9m/s)

2.7J I think this is the answer

The average kinetic energy of the toy car is 2.7 J.

The energy of the body by the virtue of its motion is known as the kinetic energy of the body. It is defined as the product of half of mass and square of the velocity.

Given data;

Mass of car is,m= 600 g = 0.6 kg

d is the distance travelled = 6 m

T is the time travelled = 2 sec

The velocity of the car is found as;

v  = d /t

V = 6m / 2 sec

V = 3 m/sec

KE =1/2mv²

KE = 1/2 × 0.6 kg ×( 3 m/sec )²

KE = 2.7 J

Hence, the average kinetic energy of the toy car is 2.7 J.

To learn more about kinetic energy refer to the link;

https://brainly.com/question/999862

#SPJ2

Answer:

a) y = 2.4 x 10⁻³ m = 0.24 cm

b) y = 3.2 x 10⁻³ m = 0.32 cm

Explanation:

The formula of Young's Double Slit experiment will be used here:

[tex]y = \frac{\lambda L}{d}\\\\[/tex]

where,

y = distance between dark spots = ?

λ = wavelength

L = distance of screen = 2 m

d = slit width = 4 x 10⁻⁴ m

a) FOR λ = 480 nm = 4.8 x 10⁻⁷ m:

[tex]y = \frac{(4.8\ x\ 10^{-7}\ m)(2\ m)}{4\ x\ 10^{-4}\ m}[/tex]

y = 2.4 x 10⁻³ m = 0.24 cm

a) FOR λ = 640 nm = 6.4 x 10⁻⁷ m:

[tex]y = \frac{(6.4\ x\ 10^{-7}\ m)(2\ m)}{4\ x\ 10^{-4}\ m}[/tex]

y = 3.2 x 10⁻³ m = 0.32 cm

Answer:

the cost of running the stereo is $211.2

Explanation:

Given;

cost of electricity, = 12.00$/kWh

power consumed by the stereo system, P = 220 W

duration of the power consumption, t = 8 hours

number of days, = 10 days

total time of the power consumption = 8 hours x 10 = 80 hours

power consumed in kW = 220 W / 1000 = 0.22 kW

Energy consumed = 0.22 kW x 80 h = 17.6 kWh

The cost of using 17.6 kWh

= 17.6 x $12

= $211.2

Therefore, the cost of running the stereo is $211.2

Explanation:

Given that,

Maximum potential, V = 4. mV

Distance, d = 0.350 m

Frequency of the wave, f = 100 Hz

(a) The maximum electric field strength created is given by:

[tex]E=\dfrac{V}{d}\\\\E=\dfrac{4.1\times 10^{-3}}{0.350 }\\\\E=0.0117\ V/m[/tex]

(b) The corresponding maximum magnetic field strength in the electromagnetic wave is given by :

[tex]B=\dfrac{E}{c}\\\\B=\dfrac{0.0117}{3\times 10^8}\\\\B=3.9\times 10^{-11}\ T[/tex]

(c) The wavelength of the electromagnetic wave can be calculated as :

[tex]\lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3\times 10^8}{100}\\\\=3\times 10^6\ m[/tex]

So, the wavelength of the electromagnetic wave is [tex]3\times 10^6\ m[/tex].

Answer:

B = 1.03 10⁻⁸ T

Explanation:

For an electromagnetic wave, the electric and magnetic fields must oscillate in phase so that they remain between them at all times, otherwise the wave will extinguish

This relational is expressed by the relation

           E /B = c

           B = E / c

let's calculate

            B = 3.10 / 3 10⁸

            B = 1.03 10⁻⁸ T

Answer: (15 - 0)/1.8 = 8. 33m/s^2

Explanation:

The acceleration of the racehorse is 8.33 m/s²

The given parameters;

initial velocity of the racehorse, u = 0

final velocity of the racehorse, v = 15  m/s

time of motion of the horse, t = 1.8 s

The acceleration of the racehorse is calculated from change in velocity per change in time of motion as shown below;

[tex]a = \frac{\Delta v}{\Delta t} = \frac{v-u}{t} \\\\a = \frac{15 - 0}{1.8} \\\\a = 8.33 \ m/s^2[/tex]

Thus, the acceleration of the racehorse is 8.33 m/s²

Learn more here: https://brainly.com/question/17067013

Answer:

https://youtu.be/ymHHdoCGJOU

Answer:

UY Scuti is slightly larger than VY Canis Majoris

Explanation:

These stars are millions of miles away and cannot be seen by the naked eye.

Beetlejuice is another large star that can be seen by the eye.

Answer:

the pressure of the water at the given depth is 196,200 N/m².

Explanation:

Given;

density of the water, ρ = 1000 kg/m³

depth of the water, h = 20 m

acceleration due to gravity, g = 9.81 m/s²

The pressure at the given depth of the water is calculated as;

P = ρgh

P = 1000 x 9.81 x 20

P = 196,200 N/m²

Therefore, the pressure of the water at the given depth is 196,200 N/m².

Question:- A scientist who studies insects, spiders, snails, and other bugs of an environment

Explanation:-

Entomologist word comes from two words Entomon and biologist

Answer:

chemical potential energy​

Explanation:

A 9v battery comes in different formats, such that the most common one is the carbon-zinc and alkaline chemistry, so these are alkaline batteries (there are also rechargeable or lithium batteries, these also depend on chemical interactions).

These batteries "draw" the energy from chemical interactions of the materials inside of it, so the type of potential energy that is stored in a battery is actually chemical (regardless of the fact that the energy can be transformed into electrical energy later) the "potential" refers to how the energy is stored.

Then the correct option is chemical potential energy​

Answer:

Chemical Potential Energy

Explanation:

Hope this helps!!

Have a blessed day/night!! <33

Answer:

work done is -2.8  × 10⁻⁶ J

Explanation:

Given the data in the question;

mass of the pendulum m = 6 kg

Length of core = 1.7 m

Now, case1, mass is pulled aside a small distance of 7.6 cm and released from rest. so let θ₁ be the angle made by mass with vertical axis.

so, θ₁ = ( 7.6 × 10⁻² m / 1.7 m ) = 0.045 rad

In case2, mass is pulled aside a small distance of 8 cm and released from rest. so let θ₁ be the angle made by mass with vertical axis.

so, θ₂ = ( 8 × 10⁻² m / 1.7 m ) = 0.047 rad.

Now, the required work done will be;

[tex]W = \int\limits^{\theta_2} _{\theta_1} {r} \, d\theta[/tex]

[tex]W = \int\limits^{\theta_2} _{\theta_1} {-mgl sin\theta } \, d\theta[/tex]

[tex]W = -mgl \int\limits^{0.047 } _{0.045 } {sin\theta } \, d\theta[/tex]

W = [tex]-mgl[[/tex] -cosθ [tex]]^{0.047}_{0.045 }[/tex]

W = 6 × 9.8 × 1.7 × [ cos( 0.047 ) - cos( 0.045 ) ]

W = 6 × 9.8 × 1.7 × [ -2.8 × 10⁻⁸ ]

W = -2.8  × 10⁻⁶ J

Therefore, work done is -2.8  × 10⁻⁶ J

Answer:

a. Find the graph in the attachment

b. 720 kΩ

c. The ratio V/I gives us our resistance which is 720 kΩ

Explanation:

a) plot a graph of V against I.

To plot the graph of V against I, we plot the corresponding points against each other. With the voltage V measured in volts and the current I measured in mA, the plotted graph is in the attachment.

b) Determine the wire's resistance , R.

The resistance of the wire is determined as the gradient of the graph.

R = ΔV/ΔI = (V₂ - V₁)/(I₂ - I₁)

Taking the first two corresponding measurements. V₁ = 72 V, I₁ = 0.1 mA, V₂ = 144 V and I₂ = 0.2 mA

R = (144 V - 72 V)/(0.2 - 0.1) mA

R = 72 V/0.1 mA

R = 72 V/(0.1 × 10⁻³ A)

R = 720 × 10³ V/A

R = 720 kΩ

c) State ohm's law and try to relate it your results.​

Ohm's law states that the current flowing through a conductor is directly proportional to the voltage across it provided the temperature and all other physical conditions remain constant.

Mathematically, V ∝ I

V = kI

V/I = k = R

Since the ratio V/I = constant, from our results, the ratio of V/I for each reading gives us the resistance. Since we have a linear relationship between V and I, the gradient of the graph is constant and for each value of V and I, the ratio V/I is constant. So, the ratio V/I gives us our resistance which is 720 kΩ.

Since V/I is constant, we thus verify Ohm's law.

The intensity of the electromagnetic wave in terms of the electric field is 0.00298 W/m² and the intensity of the electromagnetic wave in terms of the magnetic field is 1.193x10⁻⁶  W/m².

The intensity of the electromagnetic wave is related to the electric field as well as to the magnetic field.    

a) Intensity of the electromagnetic wave for the electromagnetic field.

The intensity of the electromagnetic wave (I) in terms of the electromagnetic field is given by:

[tex] I = \frac{E^{2}*c*\epsilon_{0}}{2} [/tex]   (1)

Where:

c: is the speed of light = 3.00*10⁸ m/s  

E: is the magnitude of the electric field = 1.5 V/m

ε₀: is the permittivity of free space = 8.85*10⁻¹² C²/Nm²

Hence, the intensity of the electromagnetic wave (eq 1) is:

[tex] I = \frac{(1.5 V/m)^{2}*3.00 \cdot 10^{8} m/s*8.85 \cdot 10^{-12} C^{2}/(N*m^{2})}{2} = 0.00298 W/m^{2} [/tex]                                                                                          

b) Intensity of the electromagnetic wave for the magnetic field

We can calculate the intensity of the electromagnetic wave (I) in terms of the magnetic field with the following equation:

[tex] I = \frac{cB^{2}}{2\mu_{0}} [/tex]   (2)

Where:

B: is the magnitude of the magnetic field = 10⁻¹⁰ T

μ₀: is the vacuum permeability = 4π*10⁻⁷ m*T/A

Therefore, the intensity of the electromagnetic wave (eq 2) is:

[tex] I = \frac{3.00 \cdot 10^{8} m/s*(1\cdot 10^{-10} m*T/A)^{2}}{2*4\pi \cdot 10^{-7} T/A} = 1.193 \cdot 10^{-6} W/m^{2} [/tex]

Learn more about electromagnetic waves and magnetic and electric fields here: https://brainly.com/question/11647801?referrer=searchResults                                          

I hope it helps you!

(C)

Explanation:

[tex]E = hf = (6.626×10^{-34}\:\text{J•s})(8.0×10^{15}\:\text{Hz})[/tex]

[tex]= 5.3×10^{-18}\:\text{J}[/tex]

Answer:

It's D

Explanation:

It's from alvs

Answer:

effect on motation.effect on direction

Answer:

The simplest kinetic model is based on the assumptions that: (1) the gas is composed of a large number of identical molecules moving in random directions, separated by distances that are large compared with their size; (2) the molecules undergo perfectly elastic collisions (no energy loss) with each other and with the walls of the container, but otherwise do not interact; and (3) the transfer of kinetic energy between molecules is heat.

Answer:

[tex]P=-0.2D[/tex]

Explanation:

From the question we are told that:

Far-point [tex]v=-5.04m[/tex]

Where

u=-\alpha

Generally the equation for Lens is mathematically given by

 [tex]\frac{1}{f}=\frac{1}{v}-\frac{1}{u}[/tex]

 [tex]P=\frac{1}{-5.04}-\frac{1}{\alpha}[/tex]

 [tex]P=-0.2D[/tex]

Answer:

B. Community

Took science classes for 6 years now

Explanation:

bro I have no idea fam......