An observer on Earth sees spaceship 1 fly by at 0.80c. 6.0 years later, the observer on Earth sees spaceship 2 fly by at 0.80c, traveling in the same direction as the first. Both spaceships continue to travel with constant velocities. An observer in spaceship 1 observes Earth to pass spaceship 2 ____ years after Earth passed spaceship 1.

Answers

Answer 1

Answer:

[tex]t_2=10[/tex]

Explanation:

From the question we are told that:

Velocity of both spaceships [tex]V=0.8c[/tex]

Time [tex]t_1=6[/tex]

Generally the equation for time of spaceship 2 through earth is mathematically given by

[tex]t_2=\frac{t_1}{\sqrt{1-v^2}}[/tex]

[tex]t_2=\frac{6}{\sqrt{1-0.8^2}}[/tex]

[tex]t_2=10[/tex]


Related Questions

Question 4 of 10
What is thermodynamics?
A. The movement of matter
B. The flow of fluids
C. The movement of particles
D. The flow of energy, heat, and work
SUBMIT

Answers

Answer:

Explanation:

D.

Thermodynamics is the study of  how different   types of energy is transferred through the  chemical systems

Answer: Thermodynamics is the flow of energy, heat, and work.

Explanation: This is seen in the formula for the first law of thermodynamics,  U = Q - W, or “The change of the internal energy of a system (U) is equal to the heat absorbed (Q) minus the work done by that system (W).”

A 60.0 kg person jumps onto the floor from a height of 3.0m. Find
the KE of the jumper when she hits the ground.

Answers

Answer:

1800 J

Explanation:

GPE= mgh

60*3*10

=1800 J

Cody hits up food king and uses a scale to weigh the mass of an apple. if the spring potential energy in the scale is .09 j and is spring is stretched 0.6 meters, calculate the spring constant

Answers

Answer:

oK so  here's  what you should do is  add .09 and 0.6

Explanation:

Gravity is what

A 0.98 N.

B 5N.

C 10 N.

D 100 N.

E none of the above

Answers

Answer:

C that's 10N I think. not sure though

What is Acceleration?​

Answers

Answer:

Depends on what are you looking at. All of the following are valid definitions, it just depends on which way you are analizing the problem.

From a kinematics point of view:

Acceleration is, by definition, is a vector quantity that measures the rate of change of the rate of change in position (add brackets if it helps visualizing the idea). This leads to the following different definitions - which are more like means of calculating it

the second derivative of position with respect to time [tex]a = \ddot x= \frac{d}{dt}({\frac d{dt}} x)[/tex];the first derivative of velocity with respect to time [tex]a = \dot v = \frac d{dt} v[/tex].

From a dinamics point of view

Acceleration is the effect of a force applied to a body, and measures the ratio of the force applied to a body of mass m and the mass itself (which is another formulation of Newton second law):

[tex]a = \frac Fm[/tex]

Acceleration is the rate of change of velocity

 

To define acceleration, We need to know more about motion.

Motion: This can be defined as the change in position of a body from one point to another. When an object accelerates, it undergoes motion.

Definition

Acceleration can be defined as the rate of change of velocity. The S.I unit of acceleration is meter-per-squared seconds. (m/s²)

The formula of acceleration is

a = (v-u)/t................. Equation 1

⇒ Where:

a = accelerationu = initial velocityv = final velocityt = time

Hence, Acceleration is the rate of change of velocity

Learn more about acceleration here: https://brainly.com/question/605631

Section 1: Basic Energy Relationships
1. Click/tap the Start button and observe the motion. View the bar
charts and the velocity value as the coaster car moves. Complete
the following paragraph by entering total mechanical energy
(ME), kinetic energy (KE), and potential energy (PE). The
labeled locations refer to the graphic at the right.
As the coaster car rolls down the track from A to E, the
________ values decrease and the _______ value
increase and the ________ values remain constant. The
_______ is greatest at point A and smallest at point E.
However, the _______ is smallest at point A and largest
at point E.
Section 2: Hill Design
2. Click/tap on the Bumps tab at the top of the
Interactive. Then drag the grey circles to modify the
track so that it looks like the track design at the right.
Pay attention to the background grid to help with the
design. Note that Dot G is at the same height as Dot E;
make sure that the same is true of your final design.
3. Run the simulation. Does the coaster car travel as high
as point H? ___________ Give an explanation for why
it does or doesn't reach point H.

Answers

As the coaster car rolls down the track from A to E, the potential energy values decrease and the kinetic energy value increase and the total mechanical energy values remain constant. The potential energy is greatest at point A and smallest at point E.  However, the kinetic energy is smallest at point A and largest at point E.

According the principle of conservation of mechanical energy, as the potential energy decreases, the kinetic energy increases.

[tex]P.E + K.E = M.A[/tex]

At point A, the coater has maximum potential energy.

At point E, the coaster has maximum kinetic energy.

We can fill the blanks as follows;

As the coaster car rolls down the track from A to E, the potential energy values decrease and the kinetic energy value increase and the total mechanical energy values remain constant.  The potential energy is greatest at point A and smallest at point E.  However, the kinetic energy is smallest at point A and largest at point E.

Based on the principle of conservation of mechanical energy, if the second simulation occurs at the same condition as the first, the height reached by coaster will be same.

Learn more about conservation of mechanical energy here: https://brainly.com/question/6852965

A ball is launched as a projectile with initial speed v at an angle θ above the horizontal. using conservation of energy, find the maximum height hmax of the ball's flight. express your answer in terms of v, g, and θθ.

Answers

Answer:

Explanation:

I will us θ as the angle above horizontal as I don't know how to make your chosen symbol for angle.

           KEy = PE

½m(vsinθ)² = mgh

                h = (vsinθ)²/2g

We often refer to the electricity at a typical household outlet as being 120 V. In fact, the voltage of this AC source varies; the 120 V is __________.

Answers

The average value of voltage

a plane crashes with a deceleration of 185 m/s. How many g’s is this?

Answers

Answer:

26 g's

Explanation:

Hope this helps~

Have a great day

Zero

What is the height of a building (in meters) if it takes a rock 8.2 seconds to drop from it's roof?

Answers

Answer:

d = 329.81m

Explanation:

V_f = V_0+a*t

V_f = Velocity final

V_0 = Velocity initial

a = acceleration

t = time

V_f = (0m/s)+(9.81m/s²)*(8.2s)

V_f = 80.442m/s

d = ((V_f-V_0)/2)*t

d = distance

d = ((80.442m/s-0m/s)/2)*(8.2s)

d = 329.81m

When a baseball curves to the right (a curveball) , air is flowing faster over the right side than over the left side. at the same speed all around the baseball, but the ball curves as a result of the way the wind is blowing on the field. faster over the left side than over the right side. faster over the top than underneath.

Answers

Answer:

faster over the left side than over the right side.

Explanation:

due to ball rotation, the right side is more closely matched to the speed of the air passing by as the ball progresses. This causes the air to stick more closely to the right side of the ball and that air stays with the ball surface as the spin moves it to the back of the ball and therefore leftward. As every action has an equal and opposite reaction the leftward force moving air causes the ball to experience an equal rightward force.

When the baseball curves to the right (a curveball), then the ball moves faster over the left side than over the right side.

What direction does a curveball move?

The ball, which is thrown with a spin, is curve in the direction in which the front of the ball turns.

When a baseball curves to the right (a curveball),

For this condition, the pressure of air should be high on the left side than the pressure on right side.Molecules of the air on right side pushed backward by this spinning ball.The left side with high pressure push the ball towards right side where the pressure is low.Due to higher pressure, the ball move faster on the left side than the right side.

Hence, when the baseball curves to the right (a curveball), then the ball moves faster over the left side than over the right side.

Learn more about the curveball movement here;

https://brainly.com/question/1052138

4. The winding ridge of a screw​

Answers

Answer:

Thread.

Explanation:

The most common form consists of a cylindrical shaft with helical grooves or ridges called threads around the outside.

The surface temperature of our sun is about 5800 K, and the peak of its intensity curve is in the middle of the visible spectrum. Mammals have a body temperature of about 310 K. A star that appears reddish could have a surface temperature of:

Answers

Explanation:

i expected to use Stefan's law of heat exchange but the value you gave aren't conclusive.

I should say that the temperature of the star should be close to that of the sun because of the similarity in the intensity curves

Hey there!

having a question which is from ( JEE Advanced 2014 )

[tex]\huge\color{black}\boxed{\colorbox{pink}{Question♡}}[/tex]

A rocket is moving in a gravity free space with a constant acceleration of 2 −2 along +x direction (see figure). The length of a chamber inside the rocket is 4 m. A ball is thrown from the left end of the chamber in +x direction with a speed of 0.3 −1 relative to the rocket. At the same time, another ball is thrown in –x direction with a speed of 0.2 −1 from its right end relative to the rocket. The time in seconds when the two balls hit each other is?
[tex] \\ \\ [/tex]
proper explanation needed~
thankyou~​

Answers

The time taken for the two balls to hit each other is 8 s.

The given parameters:

Acceleration of the rocket, a = 2 m/s²Length of the chamber, s = 4 mSpeed of the first ball, = V1 = 0.3 m/sSpeed of the second ball, V2 = 0.2 m/s

The time taken for the two balls to hit each other is calculated by applying relative velocity formula as shown below;

[tex](V_1 - (-V_2) )t = s\\\\(V_1 + V_2) t = s\\\\(0.3 + 0.2) t = 4\\\\0.5t = 4\\\\t = \frac{4}{0.5} \\\\t = 8 \ s[/tex]

Thus, the time taken for the two balls to hit each other is 8 s.

Learn more about relative velocity here: https://brainly.com/question/17228388

A 5.0 m length of rope, with a mass of 0.52 kg, is pulled taut with a tension of 46 N. Find the speed of waves on the rope

Answers

Answer:

Speed of waves on the rope is 21 m/s

Explanation:

Length of the rope (l) = 5.0 m

Mass of the rope (m) = 0.52 kg

Tension in the rope (T) = 46 N

Formula of speed of waves on the rope:

[tex] \bold{v = \sqrt{\dfrac{T}{\mu}}} [/tex]

[tex] \mu [/tex] = Mass per unit length of the rope (m/l)

By substituting the values in the formula we get:

[tex] \implies \rm v = \sqrt{\dfrac{T}{ \dfrac{m}{l} }} \\ \\ \implies \rm v = \sqrt{\dfrac{Tl}{m}} \\ \\ \implies \rm v = \sqrt{ \dfrac{46 \times 5}{0.52} } \\ \\ \implies \rm v = \sqrt{ \dfrac{230}{0.52} } \\ \\ \implies \rm v = \sqrt{442.3} \\ \\ \implies \rm v = 21 \: m {s}^{ - 1} [/tex]

Speed of waves on the rope (v) = 21 m/s

Please help

According to the seismograph recording of an earthquake shown above, we can conclude the following about this particular earthquake:

A.) The P-waves arrived at 24 min, the S- waves arrived at 27 min, the P-waves had a larger amplitude than the S- waves, and therefore the P- waves carried more energy than the S-waves.

B.) The P-waves arrived at 24 min, the S-waves arrived at 27 min, the S-waves had a larger amplitude than the P-waves, and therefore the S-waves carried more energy than the P-waves.

C.) The P-waves arrived at 9hrs 24min, the S-waves arrived at 9hrs 27 min, the P-waves had a larger amplitude than the S-waves, and therefore the P- waves carried less energy than the S-waves.

D.) The P-waves arrived at 9hrs 24min, the S-waves arrived at 9hrs 27min, the S-waves had a larger amplitude than the P-waves, and therefore the S-waves carried more energy than the P-waves.

Answers

Answer:

don't know ....?

Explanation:

Please help

According to the seismograph recording of an earthquake shown above, we can conclude the following about this particular earthquake:

A.) The P-waves arrived at 24 min, the S- waves arrived at 27 min, the P-waves had a larger amplitude than the S- waves, and therefore the P- waves carried more energy than the S-waves.

B.) The P-waves arrived at 24 min, the S-waves arrived at 27 min, the S-waves had a larger amplitude than the P-waves, and therefore the S-waves carried more energy than the P-waves.

C.) The P-waves arrived at 9hrs 24min, the S-waves arrived at 9hrs 27 min, the P-waves had a larger amplitude than the S-waves, and therefore the P- waves carried less energy than the S-waves.

D.) The P-waves arrived at 9hrs 24min, the S-waves arrived at 9hrs 27min, the S-waves had a larger amplitude than the P-waves, and therefore the S-waves carried more energy than the P-waves.

Which sentence states Newton's second law?​

Answers

Answer:

Force is equal to the change in momentum per change in time.

Explanation:

That situation is described by Newton's Second Law of Motion. According to NASA, this law states, "Force is equal to the change in momentum per change in time. For a constant mass, force equals mass times acceleration." This is written in mathematical form as Force = mass.

write the function of alcohol in a alcohol thermometer.​

Answers

Answer:

Ethanol-filled thermometers are used in preference to mercury for meteorological measurements of minimum temperatures and can be used down to −70 °C (−94 °F). The physical limitation of the ability of a thermometer to measure low temperature is the freezing point of the liquid used.

define parking orbit?​

Answers

A parking orbit is a temporary orbit used during the launch of a spacecraft. A launch vehicle boosts into the parking orbit, then coasts for a while, then fires again to enter the final desired trajectory.

Answer:

An orbit of a spacecraft from which the spacecraft or another vehicle may be launched on a new trajectory.

Magma usually stays below the Earth's
under great pressure.
o mantle
Inner core
outer core
Crust

Answers

Answer:

In the inner vote part of the earth

A 1200 kg car moves due north with a speed of 15m/s. An identical car moves due east with the same speed of 15m/s what are the direction and the magnitude of the system’s total momentum

Answers

a.

The direction of the total momentum is 45°

The momentum of the first car is given by p = mv where m = mass of car = 1200 kg and v = velocity of car = 15 m/sj (since it moves due north).

So, p = mv

= 1200 kg × (15 m/s)j

= (18000 kgm/s)j

Also, the momentum of the identical car, p' = mv' where m = mass of car = 1200 kg and v' = velocity of car = (15 m/s)i (since it moves due east).

So, p' = mv'

= 1200 kg × (15 m/s)i

= (18000 kgm/s)i

So, the total momentum of the system P = p + p'

=  (18000 kgm/s)j +  (18000 kgm/s)i

=  (18000 kgm/s)i +  (18000 kgm/s)j

The direction of the total momentum of the system P is gotten from

tanФ = p'/p

= 18000 kgm/s ÷ 18000 kgm/s

= 1

Ф = tan⁻¹(1)

= 45°

The direction of the total momentum is 45°

b.

The magnitude of the total momentum of the system is 25455.84 kgm/s

The magnitude of the total momentum of the system P = √(p'² + p²)

= √[(18000 kgm/s)² + (18000 kgm/s)²]

= (18000 kgm/s)√(1 + 1)

= (18000 kgm/s)√2

= 25455.84 kgm/s

The magnitude of the total momentum of the system is 25455.84 kgm/s

Learn more about total momentum here:

https://brainly.com/question/25635296

Chronic diseases are also know as

Answers

Answer:

Chronic Condition or Long-term Illness

Explanation:

They can also be known as Chronic Conditions or Long-Term Illnesses, hope this helps.

Answer:

Chronic condition, also called long-term condition.

Explanation:

Fireworks have a very high reaction rate. Describe and explain what could be done to slow down their reaction.

Answers

Answer:

Don't light up the firework or put less fire

Explanation:

Using Pharaoh's serpent or "black snake" firework could be  done to slow down their reaction.

What are fireworks chemically?

Gunpowder is typically made using three reagents: potassium nitrate, carbon, and Sulphur. These kinds of elements are used in a combustion reaction that results in this detonation explosion. You have solid reagents reacting to produce gases in the form of solid potassium carbonate, solid potassium sulphate, nitrogen gas, and carbon dioxide gas.

The numerous metal salts that are added to produce the colours spread out all of that material, which is in a super-heated state. In such extremely intense environment, the metal salts heat up and get "excited," emitting light as a result.

If you want an explosion, you need the chemical reaction to go quickly in order to release a large volume of gas in a brief period of time. You might have a chemical reaction that happens rather slowly, like the Pharaoh's serpent or "black snake" firework.

Find more about fireworks in the link:

https://brainly.com/question/16737516

#SPJ2


1. Wha' is the relationship between potential and kinetic energy?
As potential energy increases, kinetic energy increases.
b. As potential energy increases, kinetic energy decreases.
C. As potential energy decreases, kinetic energy decreases.
d. Potential and kinetic energy are two separate things and have no
relationship.

Answers

Answer:

B

Explanation:

The kinetic energy in an object is converted into potential energy. This makes the kinetic decrease, while the potential increases.

I need ideas of what kind of simple motor i can build and how i can build it. The simple motor MUST spin without using your own force. What materials would i use and how would i create it. what would i create

Answers

Answer:

i don't know but my father i think he can't answer this

Which object would have more momentum?

A 2 kg ball rolling at 4 m/s

A 5 kg ball rolling at 2 m/s

(Hint: Use momentum = mass * velocity)

a
Not enough information to determine which ball has more momentum.
b
They have the same momentum.
c
The 2 kg ball will have more momentum.
d
The 5 kg ball will have more momentum.

Answers

Answer:

b is the ans......

Explanation:

"b" (and any subsequent words) was ignored because we limit queries to 32 words.

The slope of a line on a distant-time graph is
A. distance
B. time
C. speed

Answers

Answer:

c. speed

Explanation:

In a distant-time graph the x value is usually the time and the y value is usually the distance.

If slope is the change in y over the change in x, on a distant time graph the slope would be the change in time over the change in distance

Or time / distance.

Time / distance happens to calculate speed.

Thus, the slope of a line on a distant-time graph is speed.

[tex]\huge\textbf{Hey there!}[/tex]

[tex]\large\textbf{The formula for Slope of a line is: }\mathbf{m = \dfrac{rise}{run}}\large\textbf{ whereas it is}\\\large\textbf{equal to/equivalent to }\mathbf{ \dfrac{y_2 - y_1}{x_2- x_1} \ .}\\\\\large\textbf{Basically, the slope of the line is measured with its }\\\large\textbf{\underline{steepness}. The word steepness simply means a}\\\lage\textbf{very sharp slope.}[/tex]

[tex]\large\textbf{On slope of a line on distant-time graph is basically how }\\\large\textbf{ \boxed{\bf FAST} a particular object is.}[/tex]

[tex]\large\textbf{Now, that we got that information out of the way we}\\\large\textbf{can find out our answer.}[/tex]

[tex]\large\textbf{The formula for distance is: }\mathbf{d= \sqrt{(x_2 - x_1)^2 + (y_2 +y_1)^2}}}[/tex]

[tex]\large\textsf{We cannot say that OPTION A isn't your answer because you}\\\large\textsf{cannot calculate slope of a line on a distant-time graph. You}\\\large\textsf{cannot calculate the speed of the object by using that formula.}\\\large\textsf{So, this eliminates Option A. as your answer.}[/tex]

[tex]\large\textbf{The formula of time is: }\mathbf{time = \dfrac{distance}{speed}}[/tex]

[tex]\large\textsf{Yes, it calculates the distance but it doesn't calculate how fast a(n)}\\\large\textsf{object is going. So this eliminates Option B. as your answer.}[/tex]

[tex]\large\textsf{The formula for speed is: }\mathbf{s = \dfrac{d}{t}}\large\textbf{ whereas s = \underline{speed}, }\\\large\textsf{d = \underline{distance} you have \underline{traveled}, \& t = \underline{time} that has}\\\large\textsf{been \underline{elapsed}.}\\\large\textsf{Option C. could possibly be your answer}[/tex]

[tex]\large\textbf{Option C. seems to be the closes to your result than the}\\\large\textbf{to your answer.}[/tex]

[tex]\large\boxed{\text{Therefore, your answer should be: \boxed{\textbf{Option C. Speed}}}}\huge\checkmark[/tex]

[tex]\huge\textbf{Good luck on your assignment \&}\\\huge\textbf{enjoy your day!}[/tex]

~[tex]\frak{Amphitrite1040:)}[/tex]

I need a short answer ?

Answers

Answer:

Explanation:

7a) t = d/v = 100/45cos14.5 = 2.29533...= 2.30 s

7b) h = ½(9.81)(2.29533/2)² = 6.46056... = 6.45 m

  or

  h = (45sin14.5)² / (2(9.81)) = 6.47 m

which rounds to the same 6.5 m when limiting to the two significant digits of the initial velocity.

Use the diagram of the pulley system to complete the statement.In this pulley system, the pulleys will _____ the mechanical force required to lift the block and will change the _____.

Answers

The pulleys will reduce the mechanical force (effort) required to lift the block and will change the mechanical advantage.

The pulley system is a type of simple machine which makes our work easier and faster by overcoming a large load when a small force (effort) is applied to it.

The efficiency of a machine is calculated as follows;

[tex]Eff = \frac{M.A}{V.R} \times 100\%[/tex]

where;

M.A is the mechanical advantage V.R is the velocity ratio

[tex]M.A = \frac{load}{effort}[/tex]

The velocity ratio of a pulley system = number of pulleys

The velocity ratio of a pulley system increases with increase in the number of pulleys.

Thus, we can conclude that the pulleys will reduce the mechanical force (effort) required to lift the block and will change the mechanical advantage.

Learn more about velocity ratio of pulleys here: https://brainly.com/question/24785465

Answer This!!!!!!
I'll give brainliest to whoever gets it right.

Answers

Answer:

yes the answer is C. 32.16

The answer is c 32.16 days
Other Questions
Resuma la obra Maria en 6 acciones fundamentales What feeling prevents the next man to offer his log of wood solve. x/2 + 1/3 greater than 0 Mrs. Singh made 372 cookies to put in gift boxes. She will put 20 cookies in each box. How many cookies will be left over? Americancolonists protestnew taxesimposed by GreatBritain?Many Americancolonists decidethat they can nolonger tolerateBritish rule.Which statement best completes the diagram related to causes of theAmerican Revolution?A. British merchants refuse to deliver shipments of tea to theAmerican colonies.B. British leaders cut off their support for political leaders in theAmerican colonies.C. The British Parliament passes laws to harshly punish theAmerican colonies.D. The British military withdraws its defensive forces from vulnerableAmerican colonies. Instructions: Find the missing length 8) Determine whether mixing each pair of the following results in a buffera. 100.0 mL of 0.10 M NH3 with 100.0 mL of 0.15 MNH4Cl b. 50.0 mL of 0.10 M HCL with 35.0 mL of 0.150 M NaOHc. 50.0 mL of 0.15 M HF with 20.0 mL of 0.15 M NaOHd. 175.0 mL of 0.10 M NH3 with 150.0 mL of 0.12 M NaOH When is the most important time to have a party The graph below displays a fire departments response time, which measures the time from when the alarm is sounded at the firehouse to the time the first fire engine leaves the station.A histogram titled Fire Department Response Times has response time (seconds) on the x-axis and relative frequency on the y-axis. 20 to 30, 0.07; 30 to 40, 0.08; 40 to 50, 0.2; 50 to 60, 0.32; 60 to 70, 0.18; 70 to 80, 0.13; 80 to 90, 0.04.Which interval accounts for the lowest percentage of response times?2030 seconds3040 seconds7080 seconds8090 secondsI think its (D), 80-90 seconds. Someone check me. Alejandro Obregn tuvo una enorme influencia en la pintura moderna de Colombia. Algunos le consideran a Obregn como el padre del movimiento moderno en su pas. Es dudoso que sea tan famoso como Botero, pero sus obras abstractas de pintura leo son parte de la leyenda colombiana y reflejan los profundos sentimientos de sus sujetos. Tambin son distintas por el juego con los colores oscuros. Es cierto que pint los retratos de familiares y amigos, pero el paisaje y la naturaleza aparecen con frecuencia como sujetos. El artista Alejandro Obregn era muy conocido por sus obras del movimiento del ________. (1 point) expresionismo realismo surrealismo romanticismo There are 36 tables and 7 booths in the family restaurant. Each table seats 4 people. If the restaurant can seat up to 179 people, what is the capacity of each booth?4 people5 people6 people7 people Can you think of a historical film/movie that you've seen and enjoyed? Please provide the name of the movie and what/who the movie was about. (be descriptive, at leastsentences) The difference in income between the richest and poorest citizens is called The Rolling Department of Oak Ridge Steel Company had 3,600 tons in beginning work in process inventory (50% complete). During July, 59,500 tons were completed. The ending work in process inventory on July 31 was 3,000 tons (40% complete).What are the total equivalent units for direct materials for July if materials are added at the beginning of the process? Which of the following definitions best describes the principle of separation of duties? All of the following are arguments used by global warming skeptics except(A) climate models for global warming have continually been wrong(B) the dire consequences of global warming have not come pass (C) earth has natural temperature cycles it goes through(D) an increase in temperatures would actually be good for the climate A simple random sample of 41 men from a normally distributed population results in a standard deviation of 10.7 beats per minute. The normal range of pulse rates of adults is typically given as 60 to 100 beats per minute. If the range rule of thumb is applied to that normal range, the result is a standard deviation of 10 beats per minute. Use the sample results with a 0.10 significance level to test the claim that pulse rates of men have a standard deviation equal to 10 beats per minute. Complete parts(a) through (d) below.a. Identify the null and alternative hypotheses.b. Compute the test statistic; 2 = ___ (Round to three decimal places as needed.)c. Find the P-value; P-value = ____ (Round to four decimal places as needed.)d. State the conclusion. (choose one from each ( x, y) set) (Do not reject, Reject) Upper H0, because the P-value is (greater than, less than, or equal to) the level of significance. There is(sufficient, insufficient) evidence to warrant rejection of the claim that the standard deviation of men's pulse rates is equal to10 beats per minute. Why there is a variation of weather in two different parts of India, though climate was summer? You need a 75% alcohol solution. On hand, you have a 60 mL of a 55% alcohol mixture. You also have 85% alcohol mixture. How much of the 85% mixture will you need to add to obtain the desired solution?You will need_____ mL of the 85% solution The polygons in each pair are similar. Find the missing side length.