Specific heat capacity of unknown metal alloy is 0.431 J/(g·°C).
What is the specific heat capacity of an unknown metal alloy?
The formula to calculate the specific heat capacity (c) of a substance is:
c = -q / (m * ΔT)
where q is the quantity of heat transferred, m is the substance's mass, and T is the temperature change.
In this case, the mass of the metal alloy is 36.1 g, the initial temperature is 31.6 °C, the final temperature is 24.8 °C, and the amount of heat transferred is -103.0 J (note that the negative sign indicates that heat was lost by the alloy).
First, We must compute the temperature change:
ΔT = final temperature - initial temperature
ΔT = 24.8 °C - 31.6 °C
ΔT = -6.8 °C
Now we can use the formula to calculate the specific heat capacity:
c = -q / (m * ΔT)
c = -(-103.0 J) / (36.1 g * (-6.8 °C))
c = 0.431 J/(g·°C)
Therefore, the specific heat capacity of the unknown metal alloy is 0.431 J/(g·°C).
To learn more about Specific heat capacity, visit: https://brainly.com/question/27862577
#SPJ4
students learn that impurities in hydrocarbons release sulfur into the air, which contributes to smog. which recommendation will least likely reduce the amount of sulfur released into the air?
The recommendation that is least likely to reduce the amount of sulfur released into the air from impurities in hydrocarbons is to increase the use of fossil fuels without any modifications.
This is because impurities in hydrocarbons, such as sulfur-containing compounds, can be released into the air during the combustion process. Sulfur dioxide (SO2) is a common byproduct of burning fossil fuels that contain sulfur impurities. When released into the atmosphere, SO2 can react with other chemicals to form sulfuric acid (H2SO4), a major component of acid rain, and contribute to the formation of smog.
To reduce the amount of sulfur released into the air, there are several recommendations that can be followed, including:
Using cleaner burning fuels: This can involve using low-sulfur fuels or alternative fuels, such as natural gas or renewable energy sources like solar and wind power.
Using emission control technologies: Technologies such as catalytic converters or scrubbers can help reduce the amount of sulfur released into the air.
Improving vehicle maintenance: Regular vehicle maintenance, such as changing air filters and spark plugs, can help improve the efficiency of combustion and reduce emissions.
Implementing regulations: Government regulations can require industries to reduce their sulfur emissions through various means, such as setting limits on sulfur content in fuels or requiring the use of emission control technologies.
In summary, the recommendation that is least likely to reduce the amount of sulfur released into the air is to increase the use of fossil fuels without any modifications, as this will result in the continued release of sulfur-containing compounds into the atmosphere.
To know more about hydrocarbons,
https://brainly.com/question/31643106
#SPJ11
What is the molar solubility of Ba(IO3)2 in a solution of 0.010 M NaIO3? (A) 3.0 x 10-5. (B) 8.4 x 10-4. (C) 5.3 x 10-4. (D) 6.0 x 10-6. (E) 1.2 x 10-4.
Therefore, the molar solubility of Ba(IO3)2 in a solution of 0.010 M NaIO3 is 5.31 x 10^-4 M
The balanced equation for the dissolution of Ba(IO3)2 in water is:
Ba(IO3)2(s) → Ba2+(aq) + 2 IO3-(aq)
The solubility product expression for Ba(IO3)2 is:
Ksp = [Ba2+][IO3-]^2
Let x be the molar solubility of Ba(IO3)2 in the presence of NaIO3. The reaction between Ba(IO3)2 and NaIO3 will produce Ba(IO3)2 and NaIO3 in solution. Assuming that the NaIO3 does not affect the solubility of Ba(IO3)2, we can write the following equation for the dissolution of Ba(IO3)2:
Ba(IO3)2(s) ⇌ Ba2+(aq) + 2 IO3-(aq)
Initially, there is no Ba2+ or IO3- in solution, so we can write:
[Ba2+] = x
[IO3-] = 2x
The concentration of IO3- is not affected by the presence of NaIO3 because NaIO3 does not contain any IO3- ions.
The concentration of Ba2+ is related to the solubility of Ba(IO3)2 by the equation:
[Ba2+] = 2x + [NaIO3]
The [NaIO3] is 0.010 M.
Substituting these expressions into the solubility product expression:
Ksp = (2x + 0.010)(2x)^2
Solving for x using the given Ksp value of 2.2 x 10^-9:
2.2 x 10^-9 = (2x + 0.010)(2x)^2
x = 5.31 x 10^-4 M
Therefore, the molar solubility of Ba(IO3)2 in a solution of 0.010 M NaIO3 is 5.31 x 10^-4 M, and the correct answer is (C)
To know more about molar solubility click here:
https://brainly.com/question/16243859
#SPJ11
bronze is an alloy, or mixture, of copper and tin. the alloy initially contains kg copper and kg tin. suppose you change the amount of copper by kg (i.e., add copper if is positive but remove copper if is negative). the concentration of copper in the new alloy is a function of :
The concentration of copper in the new alloy is a function of the change in the amount of copper added or removed (i.e., the value of kg).
When copper is added, the proportion of copper in the alloy increases, resulting in a higher concentration of copper. Conversely, when copper is removed, the proportion of tin in the alloy increases, resulting in a lower concentration of copper.
The concentration of copper in the new alloy depends on the amount of copper added or removed.
This is an important factor to consider when creating bronze alloys for specific purposes, as the concentration of copper can affect the properties and characteristics of the alloy.
For more information on alloy kindly visit to
https://brainly.com/question/1759694
#SPJ11
Which of the following is true for the equilibrium constant of a reaction?
A. It is a ratio of coefficients of reactants to products.
B. It has a different value at different temperatures.
C. It is represented by the symbol H.
D. Its value is always less than 1.
The equilibrium constant of a reaction, represented by the symbol K, is a measure of the extent to which a reaction proceeds to form products at a given temperature. The correct answer is B.
It is calculated as the ratio of the concentrations (or partial pressures) of the products to the concentrations (or partial pressures) of the reactants, each raised to the power of its stoichiometric coefficient in the balanced chemical equation. The value of K is not necessarily less than 1, and it is not represented by the symbol H. However, option B is correct, as the value of K depends on the temperature at which the reaction occurs.
To know more about equilibrium, here
brainly.com/question/30807709
#SPJ1
when the molecule shown undergoes electrophilic aromatic substitution, what positions will the electrophile be preferentially directed to?
Therefore, when this molecule undergoes electrophilic aromatic substitution, the electrophile will be preferentially directed to the ortho and para positions.
The molecule shown is a substituted benzene ring with two substituents, a methyl group (-CH3) and a nitro group (-NO2). In electrophilic aromatic substitution, the electrophile is attracted to the electron-rich region of the benzene ring, which is the pi-electron cloud above and below the ring.
The presence of the substituents can affect the electron density of the ring, which can change the position of electrophilic attack. Specifically, the electron-donating substituents such as -CH3 can increase the electron density of the ring, making it more reactive and directing the electrophile to positions that have lower electron density. On the other hand, electron-withdrawing substituents such as -NO2 can decrease the electron density of the ring, making it less reactive and directing the electrophile to positions that have higher electron density.
To know more about electrophilic aromatic substitution,
https://brainly.com/question/31172491
#SPJ11
what atoms must a molecule contain to participate in hydrogen bonding with other molecules of the same kind? match the atoms in the left column to the appropriate blanks in the sentence on the right.
To participate in hydrogen bonding with other molecules of the same kind, a molecule must contain hydrogen atoms bonded to either nitrogen, oxygen, or fluorine atoms.
These three elements are highly electronegative and can create a strong dipole moment within the molecule, allowing for the formation of hydrogen bonds with other molecules containing these same elements.
what is elements?
In chemistry, an element is a pure substance that cannot be broken down into simpler substances by chemical means. Elements are characterized by the number of protons in their atomic nuclei, which determines their atomic number and distinguishes them from other elements. Each element has a unique set of physical and chemical properties that differentiate it from all other elements.
To learn more about substances visit:
brainly.com/question/24353838
#SPJ11
What will the concentration of pcl5 be when equilibrium is reestablished after addition of 1. 31 g cl2?.
The concentration of PCl5 is 0.9815 M , When 1.31 g of Cl2 is added.
it reacts with PCl3 to form more PCl5 until equilibrium is reestablished. The equation for the reaction is:
PCl3 + Cl2 ⇌ PCl5
We can use the initial concentration of PCl3 and the amount of Cl2 added to calculate the change in concentration of PCl3. From there, we can use the stoichiometry of the reaction to determine the change in concentration of PCl5, and ultimately, the concentration of PCl5 at equilibrium.
Assuming the initial concentration of PCl3 is 1.0 M, we can calculate the moles of Cl2 added:
1.31 g Cl2 × (1 mol Cl2/71 g Cl2) = 0.0185 mol Cl2
Since the stoichiometry of the reaction is 1:1 for PCl3 and Cl2, this means that 0.0185 mol of PCl3 will be consumed. The new concentration of PCl3 will be:
[PCl3] = (1.0 mol - 0.0185 mol) / 1.0 L = 0.9815 M
Using the stoichiometry of the reaction, we can see that for every 1 mol of PCl3 consumed, 1 mol of PCl5 is produced. Therefore, the change in concentration of PCl5 will also be 0.0185 M. The new concentration of PCl5 will be:
[PCl5] = (0 + 0.0185 mol) / 1.0 L = 0.0185 M
So, the concentration of PCl5 at equilibrium after the addition of 1.31 g Cl2 will be 0.0185 M.
To find the concentration of PCl5 when equilibrium is reestablished after the addition of 1.31 g Cl2, follow these steps:
Step 1: Write the balanced chemical equation for the reaction:
PCl5 ⇌ PCl3 + Cl2
Step 2: Convert the mass of Cl2 to moles using its molar mass (70.9 g/mol):
(1.31 g Cl2) / (70.9 g/mol) = 0.0185 mol Cl2
Step 3: Set up an ICE (Initial, Change, Equilibrium) table:
PCl5 PCl3 Cl2
Initial x 0 0
Change -y +y +y
Final x-y y 0.0185+y
Step 4: Write the equilibrium expression (Kc) for the reaction:
Kc = [PCl3][Cl2] / [PCl5]
Step 5: Plug the equilibrium concentrations from the ICE table into the equilibrium expression:
Kc = (y)(0.0185+y) / (x-y)
To know more about equilibrium visit:
brainly.com/question/30807709
#SPJ11
Refer to Exhibit 5-7. If the government wants to impose a per-unit tax in order to raise revenues, which of the depicted markets should it choose in order to maximize tax revenues?
When the authorities units a tax, it ought to determine whether or not to levy the tax at the manufacturers or the purchasers. This is known as prison tax occurrence.
The maximum famous taxes are ones levied at the consumer, inclusive of Government Sales Tax (GST) and Provincial Sales Tax (PST). The authorities additionally units taxes on manufacturers, inclusive of the fueloline tax, which cuts into their profits. The prison occurrence of the tax is surely inappropriate while figuring out who's impacted through the tax. When the authorities levies a fueloline tax, the manufacturers will byskip a number of those fees on as an improved fee. Likewise, a tax on purchasers will in the end lower amount demanded and decrease manufacturer surplus. This is due to the fact the monetary tax occurrence, or who surely will pay withinside the new equilibrium for the occurrence of the tax, is primarily based totally on how the marketplace responds to the fee change – now no longer on prison occurrence.
To learn more about tax check the link below-
https://brainly.com/question/28735352
#SPJ4
cesium-137, which has a half-life of 30.2 yr , is a component of the radioactive waste from nuclear power plants. if the activity due to cesium-137 in a sample of radioactive waste has decreased to 35.2 % of its initial value, how old is the sample? cesium-137, which has a half-life of 30.2 , is a component of the radioactive waste from nuclear power plants. if the activity due to cesium-137 in a sample of radioactive waste has decreased to 35.2 of its initial value, how old is the sample? 1.04 yr 15.4 yr 31.5 yr 45.5 yr 156 yr
Using the half-life formula, we can find the age of the sample. The formula is:
Final activity (%) = Initial activity (%) × (1/2)^(time elapsed / half-life)
In this case, final activity is 35.2%,
initial activity is 100%,
and the half-life of cesium-137 is 30.2 years.
Solving for time elapsed:
0.352 = 1 × (1/2)^(time elapsed / 30.2)
Taking the natural logarithm of both sides:
ln(0.352) = (time elapsed / 30.2) × ln(0.5)
Divide by ln(0.5):
time elapsed / 30.2 = ln(0.352) / ln(0.5)
Now, solve for the time elapsed:
time elapsed = 30.2 × (ln(0.352) / ln(0.5)) ≈ 31.5 years
So, the age of the sample is approximately 31.5 years.
To know more about half-life, visit:
https://brainly.com/question/24710827
#SPJ11
The product, diphenylacetylene, is only sparingly soluble in diethyl ether. Why is the addition of water preferable to adding diethyl ether as a means of precipitating the product for isolation by filtration?.
When trying to isolate a sparingly soluble product such as diphenylacetylene, adding diethyl ether may not be the best option.
Although diethyl ether can dissolve the product to some extent, it may not be able to dissolve all of it. This can result in incomplete precipitation and a lower yield of the product. On the other hand, adding water can lead to the formation of a suspension of the product in water, which can then be easily filtered to isolate the product. Additionally, water is a good solvent for impurities that may be present, allowing for better separation of the product from any unwanted impurities. Therefore, adding water is a preferable method for precipitating the product and isolating it through filtration.
To know more about diethyl ether visit:
https://brainly.com/question/30364751
#SPJ11
consider the reaction: in the first of this reaction, the concentration of dropped from to . what concentration of has formed after the first of the reaction?
Concentration the moles of ClF₃ formed in the first 6s reaction will be 0.1176 moles . If the concentration of F₂(g) dropped
Cl₂ + 3 F₂ → 2ClF₃
Rate of reaction = [tex]\frac{-1}{3} \frac{dF_{2} }{dt}[/tex] = [tex]\frac{+ 1}{2} \frac{dClF_{3} }{dt}[/tex]
Initial concentration of F₂ = 0.901 M
Concentration after 19 s = 0.554 M
Change in concentration = concentration after 19 s --- Initial concentration of F₂
= 0.554 - 0.901
= - 0.347 M
Time taken = 19 s
[tex]\frac{-1}{3} \frac{dF_{2} }{dt} = \frac{+1}{2}\frac{dClF_{3} }{dt}[/tex]
0.347 × 2× 6 / 3 × 19 = [tex]\frac{dClF_{3} }{1}[/tex]
d[ClF₃] = 0.07305
concentration after the 6s - initial concentration = 0.07305
concentration of ClF₃ After 6 s = 0.07305 M
volume of reaction vessel = 1.61 L
Molarity = moles ÷ volume
Molarity × volume = moles of ClF₃
0.07305 × 1.61 = moles of ClF₃
Hence , the moles of ClF₃ formed in the first 6s will be 0.1176 .
Rate of reaction :The speed at which a chemical reaction occurs is referred to as the reaction rate or rate of reaction. It is proportional to the increase in product concentration per unit time and the decrease in reactant concentration per unit time. In chemistry, the term "reaction rate" refers to the rate of a chemical reaction.
It is frequently expressed in terms of either the concentration of a reactant that is consumed in a unit of time or the concentration of a product that is formed in a unit of time (amount per unit volume).
Incomplete question :
Consider the reaction: Cl2(g) + 3 F2(g) + 2 ClF3(g) In the first 19 s of this reaction, the concentration of F2(g) dropped from 0.901 M to 0.554 M. If the volume of the reaction vessel was 1.61 L, what amount of CIF3(g) (in moles) was formed during the first 6 s of the reaction? moles number (rtol=0.03, atol=1e-08)
Learn more about rate of reaction :
brainly.com/question/24795637
#SPJ4
The number of moles of the product that is obtained is 137.5 moles
What is the first order reaction?
Chemical reactions classified as first-order reactions have rates of reaction that are inversely correlated with the concentration of a single component. In other words, the reaction rate is inversely proportional to the reactant concentration, expressed as a power of 1.
We know that;
-1/3 [dF2]/dt = 1/2[dClF3]/dt
-1/3 ( 0.554 - 0.901 )/19 - 0 = 1/2 [dClF3]/7 - 0
6.1 * 2 * 7 = [dClF3]
85.4 M
Hence the number of moles = 85.4 M * 1.61 L
= 137.5 moles
Learn more about first order reaction:https://brainly.com/question/15909753
#SPJ1
Missing parts;
Consider the reaction: Cl2(g) + 3 F2(g) + 2 ClF3(g) In the first 19 s of this reaction, the concentration of F2(g) dropped from 0.901 M to 0.554 M. If the volume of the reaction vessel was 1.61 L, what amount of CIF3(g) (in moles) was formed during the first 7 s of the reaction?
explain why during phase changes the temp. remains constant even though heat is added
During phase changes, heat is being used to overcome the forces holding the molecules together, rather than increasing the kinetic energy of the molecules, resulting in no change in temperature.
During a phase change, such as the transition from a solid to a liquid or from a liquid to a gas, the temperature of the substance remains constant even though heat is being added. This is because the heat energy is being used to break the intermolecular forces between the particles in the substance, rather than increasing the kinetic energy of the particles themselves. The intermolecular forces are the attractive forces between the particles that hold them together in a solid or liquid state. When heat is added, the energy is used to overcome these forces and allow the particles to move more freely, causing a change in phase. Once all the particles have been converted to the new phase, any additional heat will cause the temperature to rise again.
Learn more about heat energy here:
https://brainly.com/question/25384702
#SPJ11
In a buffer solution made of acetic acid and sodium acetate, any acid that is added will react with:
Select the correct answer below:
hydronium
hydroxide
acetic acid
acetate
In a buffer solution made of acetic acid and sodium acetate, any acid that is added will react with hydroxide.
What is acid?Acid is a substance that has a pH level of less than 7, meaning it is more acidic than pure water. Acids are found in nature and are also produced through chemical reactions. Acids are able to dissolve certain substances, such as metals, and can be used to break down proteins, fats, and carbohydrates. Acids are often used in industrial processes, such as in the production of fertilizers and in electroplating. Acids can be classified as either mineral acids, such as hydrochloric acid, or organic acids, such as acetic acid. Acids can be beneficial, such as when used in food processing and preservation, or hazardous, such as when exposed to skin or eyes. Acids can also be used in cleaning products, including to remove rust and calcium deposits.
To learn more about acid
https://brainly.com/question/25148363
#SPJ4
What is the hybridization of the oxygen atom in dialkyl ethers?.
The oxygen atom is sp3 hybridized in dialkyl ethers. In dialkyl ethers, the oxygen atom forms two sigma bonds with the two alkyl groups that are linked to it as well as two lone electron pairs.
As a result of hybridizing oxygen's one s orbital and three p orbitals, these four electron pairs now occupy four equivalent hybrid orbitals.
Resulting sp3 hybrid orbitals have bond angles of approximately 109.5° and are orientated in a tetrahedral configuration. Due to this hybridization, the oxygen atom may effectively establish covalent bonds with the two alkyl groups, resulting in a molecular structure that is stable.
Stability and reactivity of these compounds are greatly influenced by sp3 hybridization of the oxygen atom in dialkyl ethers.
To know more about dialkyl ethers, here
brainly.com/question/30908555
#SPJ1
a 12-gram sample of magnesium (mg) reacts with an 18-gram sample of sulfur (s) when heated. magnesium sulfide (mgs), a solid crystalline material, is formed. what mass of mgs is most likely produced? group of answer choices 60g 6g 216g 30g
The mass of magnesium sulfide produced when 12 grams of magnesium reacts with 18 grams of sulfur is 27.8 grams.
To determine the mass of magnesium sulfide (MgS) produced when a 12-gram sample of magnesium reacts with an 18-gram sample of sulfur, we need to use the law of conservation of mass. This law states that in a chemical reaction, the mass of the products must be equal to the mass of the reactants.
The balanced chemical equation for this reaction is:
Mg + S → MgS
From this equation, we can see that 1 mole of magnesium reacts with 1 mole of sulfur to produce 1 mole of magnesium sulfide. The molar mass of magnesium is 24.31 g/mol, and the molar mass of sulfur is 32.06 g/mol. Therefore, the number of moles of magnesium and sulfur are:
moles of Mg = 12 g / 24.31 g/mol = 0.494 moles
moles of S = 18 g / 32.06 g/mol = 0.561 moles
The limiting reactant in this reaction is magnesium, since it is the reactant that will be completely consumed in the reaction. Therefore, the number of moles of magnesium sulfide produced is also 0.494 moles.
The molar mass of magnesium sulfide is 56.30 g/mol. To find the mass of magnesium sulfide produced, we can use the following equation:
mass of MgS = moles of MgS x molar mass of MgS
mass of MgS = 0.494 mol x 56.30 g/mol
mass of MgS = 27.8 g
Therefore, the mass of magnesium sulfide most likely produced is 27.8 g. a27.8 grams.
To know more about solid visit :
https://brainly.com/question/28620902
#SPJ11
The figure below shows the distribution of molecular speeds of CO2 and SO2 molecules at 25degreeC. Which curve is the profile for SO2? curve 1 (blue) curve 2 (red) lt is impossible to say without more information. Which of these profiles should match that of propane (C3H8), a common fuel in portable grills? Please select the correct answer which includes the best explanation for that answer. curve 1 because propane is nonpolar, o curve 1 because propane is polar. curve 2 because propane has a similar molar mass to C02. curve 2 because propane has a similar molar mass to SO2. It is impossible to say without more information, curve 2 because propane is nonpolar, curve 2 because propane is polar. curve 1 because propane has a similar molar mass to SO2. curve 1 because propane has a similar molar mass to C02
Curve 1(blue) is the profile for SO₂ and Molar mass of propane is 44 g/mol. Molar mass of propane and CO₂is same, the profile of propane is curve 2 (red) because propane has a similar molar mass to CO₂.
The ratio between the mass and the amount of substance in any sample of a chemical compound is known as the molar mass in chemistry. The molar mass of a material is a bulk attribute rather than a molecular one.
a) Van der Waals pressure of a gas is as follows:
P nRT n'a V-nb V2
Here,
Mass Molar mass 10.5 g 2 g/mol = 5.25 mol n = Number of moles H₂ =
T= 20 +273 = 293 K
V = 1.00 L
R=0.0821 L.atm/mol.K
a = 0.244 L2.atm/mol²
b= 0.0266 L/mol
Substitute these values in the above formula.
b) Calculate pressure of the hydrogen gas by using ideal gas equation as shown below.
PV = nRT
Substitute the values in this formula.
P(1.00 L)=(5.25 mol) (0.0821 L.atm/mol.K)(293K)
P = 126 atm.
Therefore, pressure of the ideal gas is 126 atm.
Learn more about Molar mass:
https://brainly.com/question/837939
#SPJ4
(q021) quick clay group of answer choices can move like a liquid when vibration or shaking separates the water-coated particles. isn't clay at all, but a deposit of sand that moves downslope. behaves like a liquid when still. is an example of solifluction.
Quick clay can move like a liquid when vibration or shaking separates the water-coated particles.
Quick clay, also known as Leda clay, is a type of clay that has a unique behavior. When the clay is disturbed or shaken, the water-coated particles lose their bonding strength and the clay liquefies. This can cause landslides and other types of soil failures, which can be dangerous to people and property.
Quick clay is found in areas of Canada, Norway, Sweden, and other regions with a history of glaciation. It is formed from the deposition of clay particles by glacial meltwater, which creates a highly sensitive deposit. Quick clay is a type of clay and not sand, and its behavior is different from that of other types of clay due to its unique physical properties.
To know more about the Clay, here
https://brainly.com/question/12367070
#SPJ4
How many lone pairs are on the Br atom in BrCl2-?
There are three (3) lone pairs of electrons on the Br atom in BrCl₂⁻ details are given in the below section.
A lone pair refers to a couple of valence electrons that aren't shared with some other atom and is on occasion referred to as a non-bonding pair. ( they're now no longer concerned in sharing). Lone pairs are observed withinside the outermost electron shell of atoms. Lone pairs are the pairs of valence electrons that aren't shared with some other atom. They do now no longer take part in covalent bond formation.
Example- Water molecule includes 2 lone pairs on oxygen atom. Another instance is of ammonia molecule having 1 lone pair on nitrogen atom.
To learn more about covalent bond formation check the link below-
https://brainly.com/question/12732708
#SPJ4
how long must a current of 0.50 a a pass through a sulfuric acid solution in order to liberate 0.160 l of gas at stp?
To answer your question, we first need to calculate the amount of moles of gas that will be liberated. The volume of gas at STP (standard temperature and pressure) is 0.160 L, which is equivalent to 0.160/22.4 = 0.00714 moles of gas.
Next, we need to use Faraday's law to calculate the amount of charge required to liberate these moles of gas. Faraday's law states that the amount of charge required to liberate one mole of gas is equal to the Faraday constant, which is 96,485 Coulombs/mol. Therefore, the charge required to liberate 0.00714 moles of gas is:
0.00714 mol x 96,485 C/mol = 689.9 C
Finally, we can use the formula Q = I x t, where Q is the charge, I is the current, and t is the time, to calculate the time required to pass a current of 0.50 A:
689.9 C = 0.50 A x t
t = 689.9 C / 0.50 A
t = 1379.8 seconds
Therefore, a current of 0.50 A must pass through the sulfuric acid solution for approximately 23 minutes (1379.8 seconds) in order to liberate 0.160 L of gas at STP.
To calculate the time required for a 0.50 A current to liberate 0.160 L of gas at STP in a sulfuric acid solution, we need to use Faraday's Law of Electrolysis.
First, determine the number of moles of gas liberated (n) using the Ideal Gas Law, PV=nRT. At STP, P = 1 atm and T = 273.15 K. We know that V = 0.160 L and R = 0.0821 L atm / (K mol).
1 atm × 0.160 L = n × 0.0821 L atm / (K mol) × 273.15 K
n ≈ 0.00593 mol
Next, find the number of moles of electrons (ne) needed for the electrolysis reaction. In this case, sulfuric acid (H₂SO₄) is being electrolyzed to produce hydrogen gas (H₂). The balanced half-reaction for this process is:
2H⁺ + 2e⁻ → H₂
From the stoichiometry, we see that 2 moles of electrons are needed for every mole of hydrogen gas produced.
ne = 0.00593 mol H₂ × 2 mol e⁻ / 1 mol H₂ ≈ 0.01186 mol e⁻
Now, determine the total charge (Q) required for electrolysis using Faraday's constant (F = 96,485 C/mol):
Q = ne × F ≈ 0.01186 mol e⁻ × 96,485 C/mol e⁻ ≈ 1,144.49 C
Finally, use the formula Q=It (charge = current × time) to calculate the time (t):
1,144.49 C = 0.50 A × t
t ≈ 2,288.98 s
So, a 0.50 A current must pass through the sulfuric acid solution for approximately 2,288.98 seconds to liberate 0.160 L of gas at STP.
To know more about Faraday's constant visit:
https://brainly.com/question/31604460
#SPJ11
which of the following types of substances are classified as acids only under the lewis definition? select all that apply.
The correct answer is answer is small , highly charged metal cations (e.g. Al³⁺ , Fe²⁺ etc)
According to Lewis acid base theory , electron rich species are called base while electron deficient species are called acids. According to Bronsted Lowry theory , an acid is a species which can donate H⁺ ion is solution while a base is a species which can accept H⁺ in solution. Cations are Lewis acid while anions are Lewis base. Lewis Acids are the chemical species which have empty orbitals and are able to accept electron pairs from Lewis bases.
To learn more about Lewis acid check the link below-
https://brainly.com/question/22126064
#SPJ4
Complete question-
Which of the following types of substances are classified as acids only under the Lewis definition but not the Brønsted-Lowry definition?
Salts that contain the conjugate acid of a weak base (e.g., NH4Cl).
Molecules with atoms such as N or O that have electron pairs available to donate to another atom.
Weak acids (e.g., HCN).
Small, highly charged metal cations (e.g. Al3+, Fe2+, etc.).
which of the following would be a good n-type dopant for the semiconductor silicon?which of the following would be a good n-type dopant for the semiconductor silicon?a. phosphorusb. arsenicc. borond. germaniumboth a
Phosphorus would be a good n-type dopant for the semiconductor silicon.
N-type doping involves adding impurities with extra electrons to the semiconductor material, creating excess negative charge carriers or electrons.
Phosphorus has five valence electrons and, when added to silicon, forms a donor level that provides one extra electron for the conduction band of the semiconductor, making it a good n-type dopant.
Summary: Phosphorus is a suitable n-type dopant for silicon because it provides an extra electron for the conduction band, making it a donor impurity.
Learn more about semiconductor click here:
https://brainly.com/question/1918629
#SPJ11
Calcium hydroxide is slightly soluble in water with a Ksp of 1. 3*10^-6. What is the pH of a saturated solution of calcium hydroxide at 25 °C?
(A) 12. 34
(B) 12. 14
(C) 12. 04
(D) 11. 84
The pH of a saturated solution of calcium hydroxide at 25°C is (B) 12.14.
The acronym "pH" stands for "potential of Hydrogen." It is a gauge for a solution's acidity or basicity. The neutral pH value is 7, and the pH scale goes from 0 to 14. Acidic solutions are those with a pH below 7, whereas basic or alkaline solutions are those with a pH above 7. The quantity of hydrogen ions (H+) in the solution determines the pH of the solution.
The balanced chemical equation for the dissolution of calcium hydroxide in water is:
Ca(OH)₂ (s) ⇌ Ca²⁺ (aq) + 2OH⁻ (aq)
The Ksp expression for calcium hydroxide is:
Ksp = [Ca²⁺][OH⁻]₂
At equilibrium, the concentration of Ca²⁺ is equal to the concentration of OH-, so we can simplify the expression to:
Ksp = [Ca²⁺][OH⁻]² = x(x)² = x³
where x is the molar solubility of calcium hydroxide.
We can solve for x by substituting the Ksp value and solving for x:
Ksp = 1.3 × 10⁻⁶ = x³
x = (1.3 × [tex]10^{-6}^( \frac{1}{3} )[/tex] = 0.00522 M
The concentration of OH- in the saturated solution is twice the solubility concentration, so:
[OH⁻] = 2x = 0.0104 M
Now, we can use the relationship between pH and [OH⁻] to calculate the pH of the solution:
pH = 14 - log[OH⁻] = 14 - log(0.0104) = 12.14
Therefore, the pH of a saturated solution of calcium hydroxide at 25°C is (B) 12.14.
To learn more about pH, refer to:
https://brainly.com/question/172153
#SPJ4
be sure to answer all parts. give the iupac name for the following compound: 13264a 2 , 2 - diethyl - 22 - hexanone
The IUPAC name for the compound 13264a2,2-diethyl-22-hexanone is (2E)-2,2-diethylhex-2-en-5-one.
To break it down:
- The "2,2-diethyl" part refers to two ethyl groups (CH3CH2) attached to the second carbon of the main chain.
- The "22" indicates the location of the ketone functional group (C=O) on the 2nd carbon from the end of the main chain.
- The "hexanone" part indicates that there are six carbons in the main chain and a ketone functional group.
- The "2E" before the name refers to the stereochemistry of the double bond in the main chain (in this case, it is a trans double bond).
Overall, the IUPAC name for this compound is quite long due to the specific details included in the naming convention.
To know more about IUPAC name , refer
https://brainly.com/question/28872356
#SPJ11
What will be the pH of the resulting solution after 25.0 cm3 of 0.100 mol dm−3 sulfuric acid solution, H2SO4(aq) has been added to 25.0 cm3 of 0.200 mol dm−3 potassium hydroxide solution, KOH(aq)?71058
the pH of the resulting solution is 12.The balanced chemical equation for the reaction between sulfuric acid and potassium hydroxide is:[tex]H_2SO_4[/tex](aq) + [tex]2KOH[/tex](aq) → [tex]K_2SO_4[/tex](aq) + [tex]2H_2O[/tex](l)
From the equation, we can see that one mole of sulfuric acid reacts with two moles of potassium hydroxide. Therefore, the number of moles of potassium hydroxide in 25.0 cm3 of 0.200 mol [tex]dm{-3[/tex] solution is:
moles of KOH = concentration × volume = 0.200 mol [tex]dm{-3[/tex] × (25.0/1000) dm3 = 0.005 mol
Since two moles of potassium hydroxide react with one mole of sulfuric acid, the number of moles of sulfuric acid required to react completely with the potassium hydroxide is:
moles of [tex]H_2SO_4[/tex]= (1/2) × 0.005 mol = 0.0025 mol
The total volume of the resulting solution is 50.0 cm3. Therefore, the concentration of the resulting solution is:
concentration = (moles of [tex]H_2SO_4[/tex]) / (total volume in dm3) = 0.0025 mol / (50.0/1000) dm3 = 0.050 mol [tex]dm{-3[/tex]
To calculate the pH of the resulting solution, we need to find the concentration of hydroxide ions, [OH−]. This can be done using the concentration of potassium hydroxide and the amount of sulfuric acid that was not neutralized:
moles of KOH remaining = moles of KOH - (moles of [tex]H_2SO_4[/tex] × 2) = 0.005 - (0.0025 × 2) = 0.0005 mol
concentration of KOH remaining = moles of KOH remaining / (total volume in dm3) = 0.0005 mol / (50.0/1000) dm3 = 0.010 mol[tex]dm{-3[/tex]
Now, we can use the fact that KOH is a strong base, and the concentration of hydroxide ions in the solution is equal to the concentration of potassium hydroxide:
[OH−] = 0.010 mol [tex]dm{-3[/tex]
The pH of the resulting solution can be calculated using the equation:
pH = 14 - pOH
pOH = -log[OH−] = -log(0.010) = 2
pH = 14 - 2 = 12
Learn more about pH here:
https://brainly.com/question/15289741
#SPJ11
Classify each property as physical or chemical.
a) the explosiveness of hydrogen gas
b) the bronze color or copper
c) the shiny appearance of silver
d) the ability of dry ice to sublime (change from solid directly to vapor)
a) The explosiveness of hydrogen gas is a chemical property.
b) The bronze color of copper is a physical property.
c) The shiny appearance of silver is a physical property.
d) The ability of dry ice to sublime (change from solid directly to vapor) is a physical property.
Chemical properties are properties that describe the behavior of a substance during a chemical reaction or a chemical change. Explosiveness of hydrogen gas is an example of a chemical property because it describes how hydrogen gas reacts with oxygen to form water and how the reaction releases a large amount of energy in the form of an explosion.
Physical properties, on the other hand, are properties that describe the characteristics of a substance that can be observed or measured without changing the composition of the substance. Examples of physical properties include the color, texture, and melting point of a substance. The bronze color of copper and the shiny appearance of silver are both examples of physical properties.
The ability of dry ice to sublime (change from solid directly to vapor) is also a physical property because it describes a physical change that occurs when dry ice is heated or exposed to high pressure.
To know more about sublime,
https://brainly.com/question/28626755
#SPJ11
calculate the number of moles of hcl present in a 35.67 ml sample of a 0.232 m solution.
There are 0.00826 moles of HCl present in a 35.67 mL sample of a 0.232 M solution. To calculate the number of moles of HCl present in a 35.67 mL sample of a 0.232 M solution, we need to use the formula:
moles = concentration (M) x volume (L)
Firstly, we need to convert the volume from mL to L by dividing it by 1000:
35.67 mL ÷ 1000 = 0.03567 L
Then we can plug in the values we have:
moles = 0.232 M x 0.03567 L
moles = 0.00826 mol
It's important to note that the concentration of a solution is the amount of solute (in this case, HCl) dissolved in a given amount of solvent (usually water) and is measured in moles per liter (M). This calculation is useful in chemistry when we want to know the amount of a substance present in a solution.
To know more about HCl refer here:
https://brainly.com/question/30233723#
#SPJ11
Stirring increases the rate of dissolution because it:.
The Stirring increases the rate of the dissolution because it : allows the solute to be dissolve faster.
The stirring will allows the fresh solvent molecules to start the contact with the solute. If this is not stirred, and the water just present at the surface of the solute will becomes the saturated solution with the dissolved sugar molecules, that means it is the more difficult for the additional solute to be dissolve.
With the liquid and the solid solutes, the stirring will brings the fresh portions of the solvent with the contact of the solute. The Stirring, therefore, will allows the solute to be dissolve more faster.
To learn more about dissolution here
https://brainly.com/question/11166669
#SPJ4
Give the expression for the solubility product constant for Ca 3(PO 4) 2.
[Ca2+]3[PO43-]2
[ Ca2+]2[ PO43-]3
Solubility product constant (Ksp) and its expression for Ca3(PO4)2.
What is the solubility product constant for Ca3(PO4)2 and how is its expression defined?
The expression for the solubility product constant (Ksp) for Ca3(PO4)2 is:
[Ca2+]3[PO43-]2
This represents the equilibrium constant expression for the dissolution of Ca3(PO4)2 in water, where [Ca2+] and [PO43-] represent the molar concentrations of calcium ions and phosphate ions, respectively. When Ca3(PO4)2 dissolves in water, it dissociates into its constituent ions, and at equilibrium, the product of the ion concentrations raised to their stoichiometric coefficients equals the solubility product constant.
To learn more about Solubility product constant (Ksp), visit: https://brainly.com/question/1419865
#SPJ4
Determine the ph of a 0. 188 m nh3 solution at 25°c. The kb of nh3 is 1. 76 × 10^-5.
The pH of a 0.188 M NH3 solution at 25°C, with a Kb of 1.76 x 10^-5, is approximately 11.26.
determine the pH of a 0.188 M NH3 solution at 25°C. The Kb of NH3 is 1.76 x 10^-5.
Write the reaction for NH3 in water:
NH3 + H2O ⇌ NH4+ + OH-
Set up an ICE table (Initial, Change, Equilibrium):
NH3 + H2O ⇌ NH4+ + OH-
Initial: 0.188 M 0 M 0 M
Change: -x +x +x
Equilibrium: 0.188-x M x M x M
Write the Kb expression and substitute the equilibrium concentrations:
Kb = [NH4+][OH-] / [NH3]
1.76 x 10^-5 = (x)(x) / (0.188-x)
Make the approximation that x is much smaller than 0.188, so the equation becomes:
1.76 x 10^-5 ≈ x^2 / 0.188
Solve for x, which represents [OH-]:
x = sqrt(1.76 x 10^-5 * 0.188)
x = 0.00183
Calculate the pOH:
pOH = -log10(0.00183)
pOH = 2.74
Determine the pH by subtracting the pOH from 14:
pH = 14 - 2.74
pH = 11.26
The pH of a 0.188 M NH3 solution at 25°C, with a Kb of 1.76 x 10^-5, is approximately 11.26.
Learn more about pH
brainly.com/question/15289741
#SPJ11
Exchange of gases and metabolites between the blood and tissues occurs in the:.
Exchange of gases and metabolites between the blood and tissues occurs in the capillaries.
Capillaries are small and thin-walled blood vessels that connect arteries and veins. They are the smallest of the blood vessels, with diameters ranging from 5 to 10 micrometers, and they are so numerous that virtually every cell in the body is located within a few micrometers of a capillary.
Capillaries have several important functions in the body, but their most important role is to facilitate the exchange of gases, nutrients, and waste products between the blood and tissues. Oxygen and nutrients diffuse from the capillaries into the tissues, while carbon dioxide and other waste products diffuse from the tissues into the capillaries to be carried away and eliminated from the body.
To know more about Capillaries here
https://brainly.com/question/28214061
#SPJ4
