AnswAnswer This!!!!!!
I'll give brainliest to whoever gets it right.

Answer:

Explanation:

easy way

when system is all kinetic energy, velocity is at a maximum

E = ½mv²

v = √(2E/m) = √(2(25)/0.5) = √100 = 10 m/s

harder way

ω = √(k/m) = √(80/0.5) = √160 rad/s

When the system is entirely spring potential, the amplitude A is

E = ½kA²

A = √(2E/k) = √(2(25)/80) = 0.790569... = 0.79 m

maximum velocity is ωΑ = 0.79√160 = 10 m/s

Answer:

Energy is conserved.

Explanation:

Without friction, kinetic energy and gravity potential energy are always swapping back and forth.

The block slides down an inclined friction-less track to a infinite hill that the block begins to climb and slow down, in which the energy is conserved.

Friction refers to the force that prevents hard surface, fluid layers, as well as material elements from sliding against each other.

There are various kinds of friction: Dry friction is the force that opposes the relative lateral motion of two in contact solid surfaces.

It is thought to be caused by the interactions of tiny bumps on surfaces rubbing against one another.

The bumps on each surface bend and exert force on one another, making it difficult for the surfaces to slide over one another.

A block's speed increases while its acceleration remains constant as it slides down a frictionless incline. After being placed on a ramp inclined at an angle with the horizontal, a crate remains stationary.

Thus, the block slides beneath an inclined friction-less track to an unlimited hill, where it commences to climb as well as slow down, preserving energy.

For more details regarding friction, visit:

https://brainly.com/question/13000653

#SPJ2

Answer:

Explanation:

Your question makes no sense.

moment of inertia is a property of the disk and its geometry.

The moment of inertia of a uniform solid disk around an axis through its geometric center and perpendicular to its flat ends is

I = ½mR² = ½(3.2)0.45² = 0.324 kg•m²

the applied torque about the same axis would be

τ = FR = 420.4(0.45) = 189.18 N•m

and the angular acceleration about the same axis would be

α = τ/I = 189.18/0.324 = 583.9 rad/s²

solution:

the formula is T = F * r * sin(theta) so just input the numbers and solve it.

Explanation:

Torque is the twisting force that tends to cause rotation. The point where the object rotates is known as the axis of rotation. Mathematically, torque can be written as T = F * r * sin(theta), and it has units of Newton-meters

Answer:Colloid - well compacted together but not one

Answer:

60w

Explanation:

The power required is 30 Watt.

Let us recall that power is defined as the rate of doing work. Hence, we can write as follows;

Power = Work done/ time taken

Now;

work done =  Force × distance

Force = 30.0 N

Distance = 10.0 m

work done = 30.0 N × 10.0 m = 300 J

The power expended = 300 J/10.00 s = 30 Watt

Learn more: https://brainly.com/question/64224

Answer:

i think your answer is this: the objects have no interactive with each other.

Explanation:

if you think about it tissue paper doesn't really have a static electrical charge if it does it is very weak so therefore cannot really attract or repel anything.

Answer:

The axis is tilted and points to the North Star no matter where Earth is in its orbit. Because of this, the distribution of the Sun's rays changes. ... It also means that the angle at which sunlight strikes different parts of Earth's surface changes through the year.

Explanation:

Pls sub to bdoggaming if this helped

Answer: Time (days) = 88, the (mass) = 0.2180

Explanation:

Time (days) = 88, the (mass) = 0.2180

Answer:

m ω^2 R = centripetal force

G M m / R^2 = gravitational force

ω^2 = G M / R^3    for the forces to be equal

d (density) = M / V = M / (4/3 R^3) = 3/4 M / R^3

or M / R^3 = 4 d / 3

Then

ω^2 = G 4 d / 3

d = 3.7 g/cm^2 = 3700 kg/m*3    converting

ω^2 = 6.67E-11 * 3700 * 4 / 3 = 32.9E-8

ω = 5.74E-4

P = 1 / f = 2 pi / ω = 6.28 / 5.74E-4 = 1.09E4 sec

10900 / 3600 = 3.04 hrs    for the minimum rotation period

Answer:

hey man, think you forgot to put the questions

Answer:

1. An object is in motion when its distance from another object is changing.

2.Speed is given direction is called velocity.

Speed can be calculated.......

Answer:

no

Explanation:

u flipped it i cant see

Answer:

Explanation:

Not sure what your options are but anything that says something like

"at the block surface in contact with the ramp along the line from V to Z"  is probably a good shot.

Answer:

Q1. A measurable extent of a particular kind, such as length, breadth, depth, or height.

Q2. A dimensional constant is a physical quantity that has dimensions and has a fixed value. Some of the examples of the dimensional constant are Planck's constant, gravitational constant, and so on.

Q3. Physical quantities which posses dimensions and have variable are called dimensional variables. Examples are length, velocity, and acceleration etc.

Q4. Dimensionless variables are the quantities which doesn't have any dimensions the the value is a variable. Eg: angle = arc/ radius. Dimensions = L/L. = 1. So angle does not have any dimensions and the value can vary.

Q5. Principle of Homogeneity states that dimensions of each of the terms of a dimensional equation on both sides should be the same. This principle is helpful because it helps us convert the units from one form to another.

Q6. Dimensional analysis has been around a long time, Newton called it the "Great principle of Similitude", but the modern form can be traced back to James Clerk Maxwell. It was Maxwell who distinguished mass [A/], length [£], and time [7"] as the independent dimensions from which others could be derived.

Q7. Mass, length, time, temperature, electric current, amount of light, and amount of matter.

Q8. Dimensional analysis is used to convert the value of a physical quantity from one system of units to another system of units. Dimensional analysis is used to represent the nature of physical quantity. The expressions of dimensions can be manipulated as algebraic quantities.

Hope that helps. x

Answer:

Divergence generally means two things are moving apart while convergence implies that two forces are moving together. ... Divergence indicates that two trends move further away from each other while convergence indicates how they move closer together.

Explanation:

Rewrite the amounts as improper fractions:

9 2/3 = 29/3

3 7/8 = 31/8

Rewrite both fractions with a common denominator

29/3 = 232/24

31/8 = 93/24

Now subtract: 232/24 - 93/24 = 139/24

Rewrite as a proper fraction: 5 19/24

Answer 5 19/24

Answer:

Explanation:

constant acceleration???

assume it to be so

average speed is (10 + 30) / 2 = 20 m/s

t = d/v = 60/20 = 3 s

Answer:

Assuming the attic is ventilated to the open air the air pressure inside the house gets lower and the fan job becomes easier. It will speed up because while the pressure differential across the fan is increased, the mass of air being moved has decreased.

This can be verified by running a household vacuum cleaner in hose mode. With the hose open and air moving through it, the motor speed will be at a certain level producing a certain noise pitch . Placing your hand over the hose end will decrease the pressure in the hose, reduce the volume of air moving and you will hear an increase in motor pitch as it speeds up under lower load conditions.

The area inside the vacuum hose is akin to the inside of a well sealed house with an attic fan running.

In the physical sciences, pressure is compressive stress at quite a point within a confined fluid or the perpendicular force per unit area.

The force exerted perpendicularly to an object's surface per unit area across which that force is dispersed is termed as pressure. In relation to the surrounding pressure, gauge pressure is the pressure.

The air pressure within the house decreases and the fan's task gets simpler if the attic is aired to the outside air. It will increase because the amount of air being moved is much less, while the pressure difference across the fan is greater.

Running a home vacuum in hose mode will demonstrate this. The motor speed will be maintained at a set level, producing a specific noise pitch, with the duct open and air flowing through it. You will notice an increase in motor pitch when it speeds up under reduced load situations by placing your finger over the hose end, which will also lower the pressure in the hose and limit the amount of air moving.

To know more about Pressure:

https://brainly.com/question/12971272

#SPJ2

The kinematics and Newton's second law we can find the results for the questions about the braking movement of the car are;

Question 1.

     a) The stopping distance is: x = 270 m

     b) The initial velocity is: v₀ = 17.3 m / s

     c) Concepts of kinematics and Newton's second law show us the expressions to make safe trips and avoid accidents on the roads.

Question 2.

Given parameters

To find

Question 1.

    a) Minimum braking distance.

    b) If the distance is x = 40.0 m, what speed should the vehicles have?

    c)  Conclusive importance of physics in daily life.

Question 2.

Kinematics studies the movement of bodies, looking for relationships between the position, speed and acceleration of bodies.

         v² = v₀² - a2 x

Where v and v₀ are the current and initial velocity, respectively, at acceleration and x the distance traveled.

Newton's second law states that the net force is proportional to the mass and the acceleration of the body.

          F = ma

Where F is force, m is mass and acceleration.

In the attachment we see a diagram of the forces in the system. Let's look for the acceleration of the body

        fr = m a

        a =[tex]\frac{fr}{m}[/tex]  

        a = [tex]\frac{7.5 \ 10^3}{2.0 \ 10^3 }[/tex]  

        a = 3.75 m / s²

This acceleration is in the opposite direction to the speed.

Let's find the distance needed to stop, the final speed is zero.

          0 = v₀² - 2 ax

           x = [tex]\frac{v_o^2 }{ 2a}[/tex]  

Let's calculate.

          x = [tex]\frac{45^2 }{2 3.75}[/tex]  

          x = 270 m

This is the minimum distance that the two vehicles must separate to avoid a collision.

b) We look for speed.

        v₀ = [tex]\sqrt{2ax}[/tex]  

        v₀ = [tex]\sqrt{2 \ 3.75 \ 40.0}[/tex]  

        v₀ = 17.3 m / s

c) The concepts of kinematics and Newton's second law show us the expressions to make safe trips and avoid accidents on the roads.

2) They indicate that the initial velocity is v and the distance traveled to stop is d, let's find the acceleration.

           0 = v₀² - 2ax

Let's substitute.

             a = [tex]\frac{v^2}{2d}[/tex]  

They ask the distance traveled if this car traveled from an initial speed 2v.

             0 = v² - 2 a x

             x = [tex]\frac{v^2}{2a}[/tex]  

We substitute

            x = [tex]\frac{(2v)^2 }{2} \ (\frac{2d}{v^2})[/tex]  

            x = 4 d

In conclusion, using the kinematic relations and Newton's second law we can find the results for the questions about the braking movement of the car are;

Question 1

       a) The stopping distance is: x = 270 m

       b) The initial velocity is: v₀ = 17.3 m / s

        c) concepts of kinematics and Newton's second law show us the expressions to make safe trips and avoid accidents on the roads.

Question 2.

Learn more about kinematics here:  brainly.com/question/13202578

Answer:

Explanation:

I will ASSUME this means torque about the dot.

3) 20(3) + 10(6) - 30(4) = 0 N•m

4) 10(0.5) - 6sin45(1) = -0.7573593... or about 0.76 N•m CCW

5) 25(3) - 40sin30(4) = -5 N•m or 5 N•m CCW

6) 15(3) - 12(2) - 10sin45(6) = -21.4264068... or about 21 N•m CCW

People often wants to be recognized for their achievement. The true statement is that People from individualistic cultures may find awards that single them out as more reinforcing than people from

collectivistic cultures.

It is often based on the individual self and its specific qualities that distinguishes one from others.

Collectivism is simply known as a cultural system that place emphasis on the needs of the group/society more than our self need self.

Learn more from

https://brainly.com/question/19253449

Answer:

A: P and N are both nonmetals, same strength: No

B: Most likely not

C: Same saying as B

D: Most likely yes

Explanation:

I don't actually know if i'm right, I just want to help you okay, so if it's wrong than sorry. Also I couldn't tell if the CI is a Ci(17) or CL(6+53)

Part reason why I was saying that B and C are most likely incorrect. And D the NH3 has more value than HF (if I remember)

As per the given situation, [tex]PH_3[/tex] is stronger acid than [tex]NH_3[/tex]. The correct option is A.

Any substance that tastes sour in water, turns blue litmus paper red, reacts with some metals to liberate hydrogen, reacts with bases to form salts, and promotes chemical reactions is considered an acid (acid catalysis).

Because strong acids have mostly ions in solution, the bonds that hold H and A together must be weak. Strong acids easily dissociate into ions.

Because weak acids exist primarily as molecules with only a few ions in solution, the bonds that hold H and A together must be strong.

[tex]PH_3[/tex] is a more potent acid than [tex]NH_3[/tex]. as PH3 has a pKa of -5.5 and [tex]NH_3[/tex] has a pKa of 9.9.

Thus, the correct option is A.

For more details regarding acid, visit:

https://brainly.com/question/14072179

#SPJ2

Answer:

D) It cannot be determined without more information.​

Explanation:

Velocity is a vector meaning it has both magnitude and direction.

Force and acceleration are also vectors.

Without knowing the directions of each, we cannot know if the mass has a speed (scalar value) change.

We can know that the mass will have a velocity change at the rate of 2 m/s² in the direction of the applied force.

If that force is applied in the direction of initial velocity, the velocity (and speed) will increase in magnitude in the same direction.

If that force is applied opposite of the initial velocity, the  the velocity (and speed) will decrease in magnitude in the same direction. If the acceleration lasts long enough, velocity will eventually become zero and then become negative. At the same time, speed will become zero, and then increase again as speed is the absolute value of the magnitude of velocity.

If the force is applied at any other angle, both the velocity and the speed will change in both magnitude and direction.

Answer:

just do it. it's simple be smart friends

Answer:

Explanation:

30(3) + 40(-2) + 20(x) = 0(20 + 30 + 40)

x = -0.5

30(4) + 40(-2) + 20(y) = 0(20 + 30 + 40)

y = -2

(-0.5, -2)

Over the past few decades man has always embarked on different space exploration by traveling to the moon. A typical Journey to the moon from Earth will take about 3 days in recent times.

Research on space exploration is still growing and expanding, with large amount of funding and support globally.

Learn more about Space and moon exploration:

https://brainly.com/question/3983943

The magnitude and direction of the velocity of the  golf ball is 6.4 m/s at 38.7⁰.

The given parameters:

The magnitude of the resultant velocity of the golf ball is calculated as follows;

[tex]v= \sqrt{v_y^2 + v_x^2} \\\\v = \sqrt{4^2 + 5^2} \\\\v = 6.4 \ m/s[/tex]

The direction of the golf ball's velocity is calculated as follows;

[tex]\theta = tan^{-1} (\frac{v_y}{v_x} )\\\\\theta = tan^{-1}(\frac{4}{5} )\\\\\theta = 38.7 \ ^0[/tex]

Thus, the magnitude and direction of the velocity of the  golf ball is 6.4 m/s at 38.7⁰.

Learn more about magnitude and direction of velocity here: https://brainly.com/question/2456181

Answer:

True;   ar = v^2 / R      Radial acceleration because it moves in a circular path

    at = α R = tangential acceleration because its speed changes

a = at + ar    total acceleration equals sum of radial and tangential