argon at a pressure 2 atm fills a 100ml vial at a temperature of 0c what would the pressure of the argon be if we increaase the volume to 500ml

The balanced redox reaction  in acidic solution is:

Cu(s) + 4H+(aq) + 2NO3-(aq) → Cu2+(aq) + 2NO2(g) + 2H2O(l)

The reaction given is a redox reaction and it needs to be balanced. The reactants and products should have the same number of atoms of each element on both sides of the equation. In the given equation, the number of Copper atoms and Nitrate ions are not balanced on both sides of the equation. In acidic solution, the hydrogen ions (H+) are also present and they also need to be added to the equation. In this case, 4 hydrogen ions and 2 water molecules have been added to the balanced equation to balance the equation.

To know more about redox reaction click below:

brainly.com/question/10825022#

#SPJ4

Cardiac tamponade is a common complication of IE, which can affect the heart valves and is an infection of the heart's innermost layer. It is true that heart failure, sepsis, and dysrhythmias can develop with IE.

When blood or fluid accumulates between the heart muscle and the outer covering sac (pericardium), it puts pressure on the heart and causes cardiac tamponade. Cardiac tamponade may happen because of: cutting open an aortic aneurysm (thoracic) terminal lung cancer. chest pain (acute MI). An abnormal or irregular heartbeat is known as a cardiac dysrhythmia (arrhythmia). A dysrhythmia can cause your heart to beat too quickly or too slowly. Another possibility is that your heart's rhythm is disturbed, giving you the impression that a beat has skipped. Your heart may beat excessively rapidly, or too slowly, or with an uneven pattern (tachycardia).

To learn more about IE click here         https://brainly.com/question/14659194

#SPJ4

The chemical  produced when the protein from food is broken down are amino acids.

Amino acids are defined as the substances that are considered to be the monomers of proteins.Every amino acid has the same structure which consists of a central carbon that is binded to an amino group , carboxyl group and a hydrogen.

Each amino acid also has an  another atom or a group of atoms which is  bonded to the alpha carbon which are also known as the R group or the variable group of the side chain.There are 20  amino acids that are  present in natural proteins and each amino acid has the same backbone.

Proteins are present in food and are made up of amino acids.Thus,amino acids are  produced when the protein from food is broken down.

Learn more about amino acids,here:

https://brainly.com/question/31872499

#SPJ12

Ba(NO3)2 will form a precipitate when mixed with an aqueous solution of sodium sulfate (Na2SO4)

Barium Nitrate Crystals, When each of these is combined with sodium sulfate, one of the results is sodium nitrate, and the other is the positive/metal ion with sulfate. To make a precipitate (solid/insoluble), we need to look for the positive ion that goes with sulfate. The Solubility Rules may be found on page 6 of the Reference Tables.

Calcium sulfate, strontium sulfate, barium sulfate, mercury sulfate, lead (II) sulfate, and silver sulfate are the only insoluble sulfates. Because its positive ion is barium, the answer must be , Barium nitrate is the inorganic compound with the chemical formula Ba(NO3)2. It, like most barium salts, is colorless, toxic, and water-soluble.

To learn more about Ba(NO3)2 to refer:

https://brainly.com/question/23559092

#SPJ4

Answer: You were right I'm not sure why it says you're incorrect?

Explanation:

The number of phosphorus atoms in a 2.34 g sample of calcium phosphate is calculated via molar mass and Avogadro's number. Your estimate of 9.1 x 10^21 phosphorus atoms is very close to the actual atoms present.

To solve this inquiry, let's start by finding the molar mass of calcium phosphate (Ca3(PO4)2). The molar mass is calculated as follows: 3(40.08 g/mole for Ca) + 2(1.01 g/mole for H) + 2(15.999 g/mole for O) + 2(30.974 g/mole for P) = 310.18 g/mole.

Next, divide the mass of the sample by the molar mass of calcium phosphate to find number of moles: 2.34 g ÷ 310.18 g/mole = 0.00754 moles.

Remember that 1 mole of calcium phosphate contains 2 moles of phosphorus atoms. Therefore, the number of moles of phosphorus atoms is 2*0.00754 = 0.01508 moles.

Then, use Avogadro's number (6.02 x 1023 atoms/mole) to find the number of phosphorus atoms: 0.01508 moles * 6.02 x 1023 atoms/mole = 9.08 x 1021 atoms. Your estimate of 9.1 x 1021 phosphorus atoms is essentially correct!

https://brainly.com/question/32288931

#SPJ2

magnetic quality Ne2 particle does not exist because the bond order is zero. Due to the lack of any unpaired electrons, it is diamagnetic. B2 compound.

VB Theory Valance Bond The valence bond hypothesis states that rather than occupying molecular orbitals, electrons in molecules do so in atomic orbitals. A chemical bond is created when two atomic orbitals overlap, and this overlapping causes the electrons to be concentrated in the bond region.

Using the model of localized electron bonds Two atoms sharing a pair of electrons results in bonds. Since an orbital may hold two electrons, we typically speak of bonding pairs and lone pairs of electrons.

To know more about Valance Bond visit :

https://brainly.com/question/866518

#SPJ4

The reaction of aluminum and hydrogen bromide will form 212.44 grams of aluminum bromide.

The chemical equation for the reaction between aluminum and hydrogen bromide is:

[tex]2 Al + 3 HBr[/tex] →[tex]Al_2Br_6[/tex]

From this equation, we can see that the reaction is a stoichiometric reaction, which means that the ratio of the reactants and products is fixed and is determined by the coefficients in the balanced equation.

If we have 121 grams of hydrogen bromide, the number of moles of hydrogen bromide can be calculated using the molar mass of hydrogen bromide ([tex]HBr[/tex]) which is approximately 80.9 g/mol. So:

121 g [tex]HBr[/tex] /  80.9 g/mol = 1.49 mol [tex]HBr[/tex]

Since the coefficient of hydrogen bromide in the balanced equation is 3, we know that for every one mole of aluminum, we need 3 moles of HBr. So, in this case, we have excess [tex]Al[/tex], which means the limiting reactant is [tex]HBr[/tex], and we have 1.49 moles of [tex]HBr[/tex].

The number of moles of aluminum bromide ([tex]Al_2Br_6[/tex]) formed can be calculated by dividing the number of moles of [tex]HBr[/tex] by the coefficient of [tex]HBr[/tex] in the balanced equation, which is 3

1.49 moles [tex]HBr[/tex] / 3 = 0.497 moles [tex]Al_2Br_6[/tex]

We can calculate the number of grams of aluminum bromide by multiplying the number of moles by the molar mass of aluminum bromide, which is approximately 427.3 g/mol

0.497 moles [tex]Al_2Br_6[/tex]  * 427.3 g/mol = 212.44 g [tex]Al_2Br_6[/tex]

So, the reaction of aluminum and hydrogen bromide will form 212.44 grams of aluminum bromide.

Learn more about the formation of aluminum bromide ;

https://brainly.com/question/14428187

If a sample of the compound contains calcium ions, then iodide ions that it contains is 14.8 x 10^21.

Ionic compounds are those that have ionic bonding between elements with significant differences in their electronegativity.

The stronger the attraction between the cation and anion, the bigger the difference. Due to strength and the amount of energy required to break them, they have high melting and boiling points.

These substances crystallize into brittle, easily breakable tiny bits. Generally speaking, electrovalent substances dissolve in water but are insoluble in solvents like oil, gasoline, kerosene, etc.

Given 7.4 x 10^21 calcium ions.

Hence, the number of iodide ions is 2 * 7.4 x 10^21 = 14.8 x 10^21.

To know more about ionic compound, refer

https://brainly.com/question/2687188

#SPJ4

Note: The question given on the portal is not complete. Here is the complete question.

Question: An ionic compound forms when calcium reacts with iodine. If a sample of the compound contains 7.4 x 10^21 calcium ions, how many iodide ions does it contain

The chemical symbol for the element Ti for the given ground state electron configuration. [Ar]4s² 3d²

Electron arrangements around an atom's nucleus are known as electron configurations. As an illustration, lithium's electron configuration, 1s²2s₁, indicates that the metal has two electrons in the 1s subshell and one electron in the 2s subshell.

The shell number (n) is the first symbol used to represent an electron configuration, followed by the type of orbital and the superscript number of electrons in the orbital. Consider this: The periodic table shows that oxygen has eight electrons.

chemical symbol: Ti

name: titanium

4s²:

n = 4

l = 0

ml= 0

3d²:

n = 3

l = 2

ml= -2,-1,0,+1,+2

To know more about electron configuration visit:

https://brainly.com/question/14093167

#SPJ4

2.758 L Of liquid nitrogen are produced when gas is liquefied.

We are converting gaseous nitrogen to liquid nitrogen. Both of these substances have different densities. Therefore they will occupy different volumes . But they will have the same mass.

Step 1 : Find mass of nitrogen gas

So let us find out the mass of nitrogen gas occupied by 489 L .

The formula for density is, D = Mass / Volume

Density of nitrogen gas 4.566 g/L and the volume occupied by it is 489 L.

Let us plug in these values to find the mass of nitrogen gas.

The equation can be modified as follows.

Mass = Density × Volume

Mass = 4.566 / L × 489

Mass = 2232g

The mass of nitrogen gas is 2232 g.

Step 2 : Find the volume of a liquid nitrogen using the mass

The mass of a liquefied nitrogen is also the same.

Whereas, the density of liquid nitrogen is 809 g/L

Let us plug in this value of mass to find the volume of the liquid.

Volume = 2232 / 809g / L

Volume = 2.758 L

The volume of liquid nitrogen is 2.758 L

To know more about volume here

https://brainly.com/question/28058531

#SPJ4

Sodium is heated, a yellow spectral line whose energy is 3.37 x 10-19 j per photon is produced. The frequency of this light is 5.08 x 10^14 Hz

The frequency of light can be calculated using the equation: frequency (ν) = energy (E) / Planck's constant (h).

In this case, the energy of the photon is given as 3.37 x 10^-19 Joules, and Planck's constant is approximately 6.63 x 10^-34 Joules seconds.

So the frequency of this light would be:

ν = E / h

= (3.37 x 10^-19 Joules) / (6.63 x 10^-34 Joules seconds)

= 5.08 x 10^14 Hz

This is a very high frequency, which corresponds to a very short wavelength, in the ultraviolet range of the electromagnetic spectrum.

To know more about photon please refer: https://brainly.com/question/28134171

#SPJ4

The camera incorporates all of the light which each filters transmits when we measure colour using photometric methods.

What is the purpose of photometry?

In chemistry, photometry is frequently used to study solutions and liquids. Masses of synthetic or natural components in a mixture or liquid can be measured with the aid of photometers. Applying filters to limit some wavelengths while allowing another desired wavelength to pass allows for the use of photometry in astronomy.

What is the photometric principle?

Photometry is the measuring of light absorption in the UV, VIS, and IR wavelength ranges. To calculate the concentration of analyte in a solutions or liquid, utilise this measurement.

To know more about photometric visit:

https://brainly.com/question/15837154

#SPJ4

The region around 3,000 to 4,000 cm⁻¹ is the region for most organic compounds, where the C-H stretching vibration is found.

Organic compounds are molecules that contain carbon and hydrogen atoms, and sometimes other atoms such as oxygen, nitrogen, sulfur, and phosphorous. Organic compounds are essential for life and are found in a variety of living organisms, including plants and animals. Organic compounds are also found in many non-living objects, such as petroleum and coal. Organic compounds are important because they are used to create energy, medicine, plastics, and many other useful materials. Organic compounds are made up of different combinations of elements, including carbon, hydrogen, oxygen, nitrogen, sulfur, and phosphorus.

To learn more about organic compounds
https://brainly.com/question/26854014
#SPJ4

As a result, the molecular mass of P₄O₁₀, or tetraphosphorus decaoxide, is 284 g/mol.

The molecular mass is the mass of all the atoms present in the molecule. The molecular mass of the compound is calculated using the steps:

Determine the atomic number of each element in the compound.

Each element's atomic mass is multiplied by the number of atoms in that element in the compound.

The mass of all the atoms are added up.

Here,

The given compound is:

P₄O₁₀

The atomic mass of P=31 u

The atomic mass of O=16 u

The molecular mass of P₄O₁₀,

=31*4+16*10

=124+160

=284 g/mol

Hence, the molecular mass of P₄O₁₀ that is tetra phosphorus decaoxide is 284 g/mol .

To know more about molecular mass,

https://brainly.com/question/10951606

#SPJ4

The formation of NH3(g) from its elements in their standard states can be represented by the following equation: N2(g) + 3H2(g) --> 2NH3(g).

This equation represents the combination of one molecule of Nitrogen gas (N2) and three molecules of Hydrogen gas (H2) to form two molecules of Ammonia gas (NH3). All the reactants and products are in their gaseous state at standard temperature and pressure.A chemical equation is a written representation of a chemical reaction. It shows the reactants (the starting materials) on the left side of an arrow and the products (the resulting materials) on the right side of the arrow. The arrow represents the transformation of the reactants into products.

Learn more about chemical equations here:

https://brainly.com/question/28294176

#SPJ4

The greatest amount of a solute that may dissolve in a specific amount of solvent is known as a substance's solubility; this quantity depends on the chemical makeup of both the solute and the solvent as well as on

Temperature and pressure are the two direct variables that impact solubility. Pressure solely influences the solubility of gases, but temperature affects the solubility of both solids and gases.

The four main elements that influence a gas' solubility in a liquid are listed below. Size, chemical reactivity, pressure, and temperature between the liquid and gas. Typically, as the pressure rises, the gas becomes more soluble.

To know more about solubility visit:

https://brainly.com/question/28170449

#SPJ4

A substance's solubility is the maximum amount of that substance that may dissolved in a given amount of solvent; this amount relies on the chemical composition of both the solvent and solute as well as on

Temperature and pressure are the two direct variables that impact solubility. Temperature has an impact here on soluble including both solids and gases, but pressure only affects the gas's solubility.

The below is a list of the four primary factors that affect a gas' soluble in a liquid. Temperature, pressure, size, and chemical reactivity here between liquid and gas Usually, the gas gets more soluble as the pressure increases.

To know more about solubility visit:

brainly.com/question/28170449

#SPJ4

Answer:

Explanation:

In this equation, ΔG° stands for the standard Gibbs free energy of a reaction, n is the number of moles of electrons that are transferred in the reaction, F stands for the Faraday constant (96,485.3 Coulombs/mole), and E° is the standard electrochemical potential. All of these units are consistent, since ΔG° is in Joules, n is in moles, F is in Coulombs/mole, and E° is in volts.

The percent yield of reaction is calculated as 83.67%, which implies that 83.67% of expected amount of Baso was actually produced.

The actual yield divided by theoretical yield times 100 is percent yield.

Theoretical yield of Baso will be calculated as :

As, we know, molar mass of Baso = 234.17 g/mol

So, now moles of Baso is (45.8 g Baso) / (234.17 g/mol) = 0.196 mol Baso

Actual yield of Baso will be:

As we know,  molar mass of Baso = 234.17 g/mol

So, now moles of Baso is (38.4 g Baso) / (234.17 g/mol) = 0.164 mol Baso

As we know, Percent yield is (Actual yield/Theoretical yield) x 100

= (0.164  / 0.196 ) x 100

So, the Percent yield is 83.67%

To know more about chemical equations, refer

https://brainly.com/question/26227625

#SPJ4

We have only 0.5 mol of C₇H₆O₃, so we don't have enough amount of salicylic acid, therefore, salicylic acid acts as limiting reactant.

In a chemical reaction, the amount of product that can be formed is limited by the limiting reactant, also known as the limiting reagent, which is the reactant that is consumed first.

It is helpful to convert the masses of reactants into moles in order to comprehend what the limiting reactant is. These are the molecular masses:

C₇H₆O₃ = 138g/mol

C₄H₆O₃ = 100g/mol

Making moles out of masses:

70g C₇H₆O₃ 1mol/138g = 0.5 mol C₇H₆O₃

80g C₄H₆O₃ 1mol/100g = 0.8 mol C₄H₆O₃

In the reaction, 2 moles of C₇H₆O₃ are necessary to react with 1 mol of

C₄H₆O₃ Following this ratio:

0.8 mol C₄H₆O₃ . 2 moles of C₇H₆O₃/ 1 mol of C₄H₆O₃ = 1.6mole C₇H₆O₃

We have only 0.5 mol of C₇H₆O₃  i.e, we don't have enough amount of salicylic acid, therefore, this is the limiting reactant.

To know more about limiting reactant visit:

https://brainly.com/question/1537134

#SPJ4

Answer:

Explanation:as V is proportional to n(mole),you can easily calculate using V1/n1=V2/

The volume required to hold 2 moles of the gas is 42 L

Explanation:

(2.0 x 10.5)/0.50

= 21/0.50

= 42 L

Everything is predicated on benzenation, and the replacement location depends on when benzene is in an electron-rich or electron-deficient position.

A opposite charges new particle known as an electron can either be free or attached to an atom (not bound). Each of the three main types of elements within an element is an electrode that is bonded to it; its other pair are protons plus neutrons.

Electrons are present outside the atom's nucleus, in contrast to protons and neutrons which are contained from the inside of the nucleus at its center. Negative electrons are drawn to the positively charged nucleus because the electric charges of opposite polarity attract one another.

To know more about electron visit:

https://brainly.com/question/18367541

#SPJ4

Answer:

generates heat to produce steam, which is used by a turbine generator

Explanation:

After 220 million years, The half-life is the time taken for half the mass number of atoms in a sample to decay,700 million years.

Uranium is a chemical element represented by the symbol U and the atomic number is 92. A uranium atom has 92 protons and 92 electrons, of which 6 are valence electrons present in it.

Half-Life is the time for a substance U-235 in this case to decay to 1/2 its original mass. Therefore, the problem is asking for the time for U-235 to decay to 1/2 its original mass 100 grams then the decay time is 1 half-life, or 700 million years.

Thus, After 220 million years, The half-life is the time taken for half the mass number of atoms in a sample to decay,700 million years.

To learn more about the uranium, follow the link;

https://brainly.com/question/9099776

#SPJ1

the equation for a ideal gas. PV = nRT, n=PVRT, n=1.34 mol, n=785 torr, 32.5 L62.36 L torr, and (32 + 273) K.

Explain what an ideal gas is.

The definition of an ideal gas is a gas in which the volume of the molecules and the forces between the molecules are so minimal as to not affect the behavior of the gas.

What is an example of ideal gas?

Many gases, including nitrogen, oxygen, hydrogen, noble gases, some heavier gases like carbon dioxide, and mixtures like air, can be classified as ideal gases if certain parameters are kept within reasonable limits over a wide range of temperatures and pressures.

To know more about ideal gas visit:

https://brainly.com/question/28170449

#SPJ4

The first right-hand rule relates two quantities that are current (thumb) to magnetic field (fingers).

The right hand rule states that you should point your right thumb in the direction of the velocity (v), your index finger in the direction of the magnetic field (B), and your middle finger will point in the direction of the resulting magnetic force to find the direction of the magnetic force on a positive moving charge.

The direction of the wrapped fingers will indicate the direction of magnetic field lines if a current-carrying conductor is thought to be held in your right hand with the thumb pointing in the direction of the current.

To know more about right-hand rule visit

https://brainly.com/question/11521829

#SPJ1

Yes, higher the polarity and electronegativity of the nonhydrogen atom explain the trend in acid strength shown in model 3. It shows more attraction towards the H⁺ ions and lesser is the acidity.

An atom's propensity to draw electrons (or electron density) in its direction is measured by its electronegativity. It controls how the shared electrons between the two atoms in a bond are distributed. The greater an atom's electronegativity, the more strongly the electrons in its bonds are drawn to it.

The capacity of an atom in a covalent bond to draw shared electrons is known as electronegativity. The degree to which an element draws in the shared electrons is influenced by the level of its electronegativity.

To know more about electronegativity visit:

https://brainly.com/question/17762711

#SPJ4

The product of [H₃O⁺] and [OH⁻] is calculated as1 × 10⁻¹⁴.

Ionization constant of water, Kw is the product of  [H₃O⁺] and [OH⁻].In the autoionization of water, proton is transferred from one water molecule to another to produce hydronium ion (H₃O⁺) and hydroxide ion (OH⁻).

The equilibrium expression for the reaction is Kw = [H₃O⁺][OH⁻], where Kw is the autoionization constant of water.

As, Kw = [H₃O⁺][OH⁻]

In pure water, [H₃O⁺] = [OH⁻] = 1 × 10⁻⁷

So, Kw = [H₃O⁺][OH⁻] =  1 × 10⁻⁷ ×  1 × 10⁻⁷

Thus, Kw = [H₃O⁺][OH⁻] =  1 × 10⁻¹⁴

Hence, we get the product of [H₃O⁺] and [OH⁻] is 1 × 10⁻¹⁴.

To know more about ionization constant of water, refer

https://brainly.com/question/14054598

#SPJ4

Answer:

Aluminum hydroxide (Al(OH)3) has several advantages over sodium bicarbonate (NaHCO3) as an antacid. One advantage is that Al(OH)3 does not neutralize stomach acid as quickly as NaHCO3 does, so it can provide longer-lasting relief for symptoms of heartburn and indigestion. Additionally, Al(OH)3 is less likely to cause side effects such as diarrhea, which can be a common problem with overuse of NaHCO3. Furthermore, Al(OH)3 can also adsorb excess stomach acid and form a physical barrier that helps to protect the stomach lining.

The standard molar enthalpy of formation for sodium hydroxide is -55 kJ/mol.

The standard molar enthalpy of formation for a substance is the amount of energy required to form one mole of that substance from its component elements in their standard states.

In this case, the reaction given is 2 NaOCl(aq)+NH3(aq)⇆ NHCl2(aq)+2 NaOH(aq) with an overall enthalpy change of -470 kJ/mol. According to Hess's Law, the overall enthalpy change is equal to the sum of the enthalpy changes of each component.

In this case, we need to change the sign of the reactants as they are consumed, not formed, and thus will have a positive value. Therefore, the enthalpies of formation for ammonia and bleach are +350 kJ/mol and +45 kJ/mol respectively.

When adding these values and the enthalpy of formation of NHCl2(aq) which is 140 kJ/mol and using x as the value for the enthalpy of formation of NaOH(aq) we can find that x=-55 kJ/mol.

To learn more about enthalpy at

https://brainly.com/question/13996238?referrer=searchResults

#SPJ4

The conversion that take place is solar energy to heat energy.

The energy conversion that occurred in the classroom oven was from solar energy to heat energy. Radiant energy, also known as solar energy, is the heat from the sun that heats the oven. The hotdog becomes hot and ready to eat when the internal temperature of the oven rises with the help of aluminium foil because the absorbing heat energy accumulates inside the oven more quickly than it is lost. Light energy to heat energy conversion: Solar cookers aim sunlight at a target, like a cooking pan. Conduction is the process by which light energy is transformed into heat by interacting with the receiver material. Utilizing materials that conduct and hold heat improves conversion.

To learn more about  energy click here:

https://brainly.com/question/5144470

#SPJ4