The value of current assets is given as $2,069, and the value of current liabilities is given as $4,400.
Given data:
Current assets = $2,069
Net fixed assets = $16,527
Current liabilities = $4,400
Long-term debt = $860
The formula for finding the net working capital is as follows:
Net working capital = Current assets - Current liabilities.
The net working capital of Arredondo, Inc. can be calculated using the formula shown above:
Net working capital = Current assets - Current liabilities
Net working capital = $2,069 - $4,400
Net working capital = -$2,331
Net working capital is the difference between the current assets and current liabilities of a business. It is a measure of the short-term liquidity of a company. If the value of net working capital is negative, as in the case of Arredondo, Inc., it means that the company does not have enough short-term assets to cover its short-term liabilities. This indicates that the company may face liquidity problems in the near future.
Learn more about net working capital: https://brainly.com/question/32821523
#SPJ11
machinery was purchased on january 1 for $72,000. the machinery has an estimated life of 7 years and an estimated salvage value of $9,000. double-declining-balance depreciation for the second year would be (do not round your intermediate calculations.)
The double-declining-balance depreciation for the second year would be $14,714.29.
The double-declining-balance depreciation method is a type of accelerated depreciation method commonly used in accounting. It allows for a higher depreciation expense in the early years of an asset's life, which gradually decreases over time. To calculate the double-declining-balance depreciation for the second year, you'll need to follow these steps:
1. Determine the asset's cost: In this case, the machinery was purchased for $72,000 on January 1.
2. Determine the asset's estimated salvage value: The estimated salvage value is $9,000, which is the estimated value of the machinery at the end of its useful life.
3. Calculate the asset's depreciable base: Subtract the estimated salvage value from the cost of the machinery. In this case, $72,000 - $9,000 = $63,000.
4. Determine the asset's useful life: The machinery has an estimated life of 7 years.
5. Calculate the straight-line depreciation rate: Divide 1 by the useful life of the asset. In this case, 1 / 7 = 0.142857 (rounded to six decimal places).
6. Calculate the double-declining-balance depreciation rate: Multiply the straight-line depreciation rate by 2. In this case, 0.142857 * 2 = 0.285714 (rounded to six decimal places).
7. Calculate the double-declining-balance depreciation for the second year: Multiply the double-declining-balance depreciation rate by the beginning book value of the asset. The beginning book value for the second year is the cost of the asset minus the accumulated depreciation for the first year. Since this is the second year, we'll calculate the depreciation for the first year first.
8. Calculate the depreciation for the first year: Multiply the double-declining-balance depreciation rate by the cost of the asset. In this case, 0.285714 * $72,000 = $20,571.43 (rounded to two decimal places).
9. Calculate the beginning book value for the second year: Subtract the depreciation for the first year from the cost of the asset. In this case, $72,000 - $20,571.43 = $51,428.57 (rounded to two decimal places).
10. Calculate the double-declining-balance depreciation for the second year: Multiply the double-declining-balance depreciation rate by the beginning book value for the second year. In this case, 0.285714 * $51,428.57 = $14,714.29 (rounded to two decimal places).
Therefore, the double-declining-balance depreciation for the second year would be $14,714.29.
Know more about double-declining-balance here:
https://brainly.com/question/30751480
#SPJ11
When lending standards are tightened, lenders typically require
When lending standards are tightened, lenders typically require borrowers to meet stricter criteria to receive credit. This is done to reduce the risk of defaults and ensure that lenders have adequate collateral to cover their losses.
In most cases, tighter lending standards involve higher credit score requirements, lower debt-to-income ratios, and more documentation to prove income and assets.
Lenders may also require larger down payments or higher interest rates to offset the risk of lending to less creditworthy borrowers.Tighter lending standards are often implemented during times of economic uncertainty or when lenders have experienced a high number of loan defaults.
This was particularly evident in the aftermath of the 2008 financial crisis, when many lenders were forced to tighten their standards due to the high number of defaults on subprime mortgages.By requiring borrowers to meet stricter criteria, lenders hope to reduce their exposure to risk and minimize the likelihood of losses. However, tighter lending standards can also make it more difficult for some borrowers to access credit, particularly those with lower credit scores or less stable employment.
In conclusion, when lending standards are tightened, lenders typically require borrowers to meet stricter criteria to receive credit, which reduces the risk of defaults and ensures that lenders have adequate collateral to cover their losses.
To know more about borrowers visit:
https://brainly.com/question/30549496
#SPJ11
catalog sales and online sales are activities of marketing because they link ultimate consumers to manufacturers.
Catalog sales and online sales are marketing activities that connect manufacturers with end consumers.
Catalog sales and online sales are integral components of marketing strategies aimed at connecting manufacturers with their ultimate consumers. These activities serve as a means of bridging the gap between producers and end users.
Catalog sales involve the distribution of catalogs containing product information, descriptions, and prices to potential customers. Through catalogs, manufacturers showcase their offerings and entice consumers to make purchases. Online sales, on the other hand, utilize digital platforms such as websites, e-commerce platforms, and online marketplaces to facilitate transactions between manufacturers and consumers. These platforms provide a virtual storefront where customers can browse products, compare options, and complete purchases conveniently. By employing catalog sales and online sales, manufacturers expand their reach, overcome geographical limitations, and tap into wider consumer markets. They enable direct communication with end consumers, allowing manufacturers to understand customer preferences, gather feedback, and tailor their marketing strategies accordingly. Overall, these activities serve as vital links in the marketing chain, connecting manufacturers with the individuals who ultimately consume their products.
learn more about online sales here:
https://brainly.com/question/13942280
#SPJ11
Assume that sales are $100,000, variable costs are $40,000, and fixed costs are $10,000.
What is the degree of operating leverage?
a) 1.20
b) 2.00
c) 1.50
d) 0.02
The correct answer is option (b) which is the degree of operating leverage is 2.00.
The degree of operating leverage (DOL) can be calculated as the percentage change in net operating income (NOI) divided by the percentage change in sales.
Assuming that sales are $100,000, variable costs are $40,000, and fixed costs are $10,000, we can find the degree of operating leverage (DOL) as follows:
Total cost = Variable costs + Fixed costs
= $40,000 + $10,000
= $50,000
Net operating income (NOI) = Sales - Total cost
= $100,000 - $50,000
= $50,000
If sales increased by 10%, the new sales would be:
$100,000 + 10% of $100,000 = $100,000 + $10,000
= $110,000
If sales decreased by 10%, the new sales would be:
$100,000 - 10% of $100,000 = $100,000 - $10,000
= $90,000
The percentage change in NOI can now be calculated as follows:
For a 10% increase in sales, the new NOI would be:
New NOI = $110,000 - ($40,000 + $10,000)
= $60,000
Percentage change in NOI = (New NOI - Old NOI) / Old NOI
= ($60,000 - $50,000) / $50,000
= 20%
For a 10% decrease in sales, the new NOI would be:
New NOI = $90,000 - ($40,000 + $10,000)
= $40,000
Percentage change in NOI = (New NOI - Old NOI) / Old NOI
= ($40,000 - $50,000) / $50,000
= -20%
Now we can calculate the degree of operating leverage (DOL) as follows:
DOL = Percentage change in NOI / Percentage change in Sales
= 20% / 10%
= 2
Therefore, the degree of operating leverage is b) 2.00.
To learn more about the degree of operating leverage from the given link.
https://brainly.com/question/21790059
#SPJ11
Which of the following requires nancial institutions to inform consumers of their privacy policies and permits consumers some control over their records?
1. A) Freedom of Information Act 2. B) Gramm-Leach-Bliley Act
3. C) COPPA
4. D) HIPAA
B) Gramm-Leach-Bliley Act requires financial institutions to inform consumers of their privacy policies and permits consumers some control over their records
The Gramm-Leach-Bliley Act (GLBA), also known as the Financial Services Modernization Act, is a federal law in the United States that regulates the privacy and information-sharing practices of financial institutions. One of the key provisions of the GLBA is the requirement for financial institutions to inform consumers about their privacy policies and provide them with options to control how their personal information is shared.
Under the GLBA, financial institutions such as banks, credit unions, insurance companies, and securities firms are required to provide consumers with initial and annual privacy notices that explain the types of personal information collected, how it is shared, and the consumer's rights to opt-out of certain information sharing practices.
The GLBA aims to enhance consumer privacy and give individuals more control over their financial information. By requiring financial institutions to be transparent about their data practices and allowing consumers to make choices regarding the sharing of their personal information, the GLBA helps protect consumer privacy rights in the financial sector.
The other options listed are not specifically related to consumer privacy in the financial context:
A) Freedom of Information Act (FOIA): The FOIA grants the public the right to access federal agency records but is not directly related to financial institution privacy policies.
C) COPPA (Children's Online Privacy Protection Act): COPPA is a federal law that protects the privacy of children under 13 years old online and imposes requirements on website operators and online services that collect personal information from children.
D) HIPAA (Health Insurance Portability and Accountability Act): HIPAA is a federal law that focuses on privacy and security of health information and applies to healthcare providers, health plans, and healthcare clearinghouses, rather than financial institutions.
To learn more about, financial institutions, click here, https://brainly.com/question/1122044
#SPJ11
11. R&R Heating, Inc. has 350,000 shares of $3-par common stock outstanding. They have declared a 5% stock dividend. The current market price of the common stock is $7.50 per share. The amount that will be credited to common stock on the date of declaration is
A. $52,500.
B. $78,750.
C. $131,250.
D. $183,750.
The correct answer is option C. $131,250.
To calculate the amount that will be credited to common stock on the date of declaration, we need to use the formula: Number of new shares = Old shares x % stock dividend / 100The number of shares to be distributed as a stock dividend can then be multiplied by the market price per share to determine the total amount that will be credited to common stock on the date of declaration.
Therefore: The number of new shares = 350,000 x 5 / 100 = 17,500The market value of the new shares is $7.50 per share, so the total amount that will be credited to common stock on the date of declaration is:$7.50 x 17,500 = $131,250
For more such questions on correct answer
https://brainly.com/question/29985480
#SPJ8
Projects that use Six Sigma principles for quality control normally follow a five-phase improvement process called _____.
Group of answer choices
weighted scoring model
DMAIC
use case modeling
configuration management
Projects that use Six Sigma principles for quality control normally follow a five-phase improvement process called DMAIC. The DMAIC approach is the cornerstone of Six Sigma methodology, and it is a five-phase structured problem-solving method.
This method is used to improve the business process by identifying and removing the causes of errors, and it consists of the following phases: Define, Measure, Analyze, Improve, and Control. The five phases of the DMAIC method are described below:
1. Define: This is the phase in which the problem is identified, and the project's goals and objectives are established. It is also critical to identify the project's scope and the customer's requirements.2. Measure: In this phase, the process's current state is measured to determine the root cause of the problem.
To know more about Sigma visit:
https://brainly.com/question/31956977
#SPJ11
A taxpayer can invest $10,000 in a taxable 10-year bond that yields an annual pretax return of 6 percent or buy land (a capital asset) for $10,000 that is expected to increase at an annual pretax rate of 4 percent. The taxpayer expects to hold the bond and the land for 10 years and expects to pay capital gains taxes of 20 percent when the land is sold. The taxpayer’s marginal tax rate on ordinary income is expected to be 25 percent throughout the 10-year period. Which investment is preferable?
A taxpayer who intends to invest $10,000 has a choice to either invest it in a taxable 10-year bond that yields an annual pretax return of 6 percent or purchase land (a capital asset) for $10,000 that is expected to increase at an annual pretax rate of 4 percent.
The taxpayer intends to keep the bond and the land for ten years and expects to pay a 20 percent capital gains tax when the land is sold. The taxpayer's marginal tax rate on ordinary income is expected to be 25% throughout the 10-year period. The total return on investment (ROI) from the bond will be:
($10,000 x 6% = $600) x (1 - 0.25)
= $450.
This is because the pretax yield is 6%, but the tax rate is 25%, implying that 25% of the total earnings will be deducted as taxes. Therefore, the post-tax yield will be 4.5 percent. The ROI of the bond after ten years can be calculated as follows:
$450 x 10 years = $4500.
The ROI on the land would be calculated as follows:
$10,000 x 4% x (1 - 0.2) x 10 years
= $32,000.
This implies that after 10 years, the land would be worth $32,000. The land's capital gains tax would be calculated as follows: 20% of the gain, which is
($32,000 - $10,000) x 0.2
= $4,400.
Therefore, the after-tax ROI on land would be
$32,000 - $4,400
= $27,600.
Based on the calculations, the land would be the preferable investment. This is due to the fact that the ROI on land is greater than that on the bond, and the tax rate on the capital gains tax is lower than the marginal tax rate on ordinary income.
To know more about invest visit:
https://brainly.com/question/10908938
#SPJ11
Week 4 Day 2 Case Study
Needles in the haystack
It's April and business is growing. Since you started managing the dessert bar and coffee shop in Pinehaven Port, you've extended the weekend hours twice and several times had to ask your three servers to work overtime. What will the summer be like? Even more to the point, what will the summer weekends be like, with tourists and summer residents swelling the population at regular intervals until October?
You need more staff. The owner trusts your judgement (he should; he's your brother) and told you to hire as many servers as you think you need for the upcoming busy season.
You made the mistake of posting an ad on national and local online job boards and got far too many résumés, even after the posting services did a first cut for keywords. After what seemed like hours of scanning quickly through the "maybe" pile, you narrowed it down to 10 people to interview in your search for one more full time and two new weekend servers.
You want to make sure the applicants really want a job until October, though. You don't want someone who really wants a permanent job and will quit as soon as one appears, sending you back to the haystack of résumés. By the same token, you don't want to hire someone for the weekend slot who will leave at the first sign of full-time hours elsewhere. You need interview questions that will allow you to make an apples-to-apples comparison of the candidates, show you whether they'd be a good fit with your customer group, and indicate whether they'd stay in the job they were hired to fill.
Prepare a set of interview questions for a series of 45-minute interviews.
Can you please tell me about your previous work experience and why you left your last job? this question helps assess the candidate's work history and reasons for leaving previous positions.
providing insights into their job stability and commitment. what interests you about working in the dessert bar and coffee shop industry, specifically in a seasonal position? this question gauges the candidate's genuine interest in the industry and their understanding of the seasonal nature of the job, helping identify if they are seeking long-term or temporary employment. how do you handle stressful situations and work under pressure, especially during busy periods? this question assesses the candidate's ability to cope with the fast-paced environment and indicates their commitment to delivering quality service even during peak times.
The interview questions focus on assessing the candidate's work history, commitment to seasonal employment, ability to handle stressful situations, customer service skills, and availability for weekend and extended hours. By delving into these areas, the questions aim to identify individuals who are a good fit for the dessert bar and coffee shop, both in terms of their skills and their commitment to staying for the required duration.
Learn more about customer here:
https://brainly.com/question/31192428
#SPJ11
widener industries reports annual sales of 160 million cost of goods sold for 120 million. inventory of 20 million and net income of 5 million. what is its month of supply of inventory
The month of supply of inventory for Widener Industries is 2 months.
What is Widener Industries' month of supply of inventory?To calculate the month of supply of inventory, we will use the following formula: Month of Supply = (Inventory / Cost of Goods Sold) * (12 / 1)
Given data:
Inventory = 20 millionCost of Goods Sold = 120 millionMonth of Supply = (20 million / 120 million) * (12 / 1)
Month of Supply = 0.1667 * 12
Month of Supply = 2.
Read more about supply of inventory
brainly.com/question/13374221
#SPJ4
A change in regulations means that fewer factory workers can perform a certain task. New machinery is being offered to factories that can, in some instances, perform the task without workers. Which of the following pairs represents the new wage and new quantity of factory workers?
1. Wage increase, quantity increase
2. Indeterminate wage change, quantity decrease
3. Wage decrease, quantity decrease
4. Wage decrease, indeterminate quantity change
A change in regulations means that fewer factory workers can perform a certain task. New machinery is being offered to factories that can, in some instances, perform the task without workers.
If we have to choose which pair represents the new wage and new quantity of factory workers, then the answer would be option 4, wage decrease, indeterminate quantity change. Why?
In the given scenario, the new machinery is being offered to the factories, which means the productivity of the workers will decrease because their work is being replaced by machines.
Hence, the demand for the workers will decrease, which will result in the decrease of wage, hence the first part of the answer is "Wage Decrease".
Now, we don't know exactly how much the quantity of the workers will decrease because that is subjective and depends on the factory's efficiency, capacity, and resources. we can conclude that the quantity of workers will have an indeterminate change, hence the second part of the answer is "In determinate quantity change".
So, the new wage and quantity of factory workers are Wage decrease and indeterminate quantity change.
To know more about regulations visit :
https://brainly.com/question/30695404
#SPJ11
Test Company uses a normal, activity-based cost system to determine product cost. The following information is available from the accounting system.
Activity Estimated cost Cost driver Estimated usage
Moving materials $45,000 Inspection hours 1,800 inspection hours
Inspecting products $16,200 Material moves 3,600 material moves
Test Company estimates that 6,120 direct labor hours will be used for the coming period. During the period, Test Company completed Job 101 and reported the following actual amounts.
Job 101
Direct materials $1,500
Direct labor $1,000
Direct labor hours 250
Inspection hours 100
Material moves 80
Determine the total cost of Job 101.
The total allocated overhead cost for Job 101 is $2,500 + $360 = $2,860. Adding this to the direct materials and direct labor costs, we get the total cost of Job 101: $1,500 + $1,000 + $2,860 = $5,680.
The total cost of Job 101 in Test Company is $5,680. This cost consists of direct materials, direct labor, and allocated overhead costs. Direct materials amount to $1,500, while direct labor costs $1,000. The allocated overhead costs are determined using the activity-based cost system.
In the first activity, moving materials, the estimated cost is $45,000, and the cost driver is inspection hours. The estimated usage of inspection hours is 1,800. For Job 101, 100 inspection hours were reported. To allocate the cost of moving materials to Job 101, we can use the following calculation:
Allocation rate = Estimated cost / Estimated usage = $45,000 / 1,800 inspection hours = $25 per inspection hour Allocated cost for moving materials = Allocation rate × Actual usage = $25 × 100 inspection hours = $2,500
In the second activity, inspecting products, the estimated cost is $16,200, and the cost driver is material moves. The estimated usage of material moves is 3,600. For Job 101, 80 material moves were reported. To allocate the cost of inspecting products to Job 101, we can use the following calculation:
Allocation rate = Estimated cost / Estimated usage = $16,200 / 3,600 material moves = $4.50 per material move .Allocated cost for inspecting products = Allocation rate × Actual usage = $4.50 × 80 material moves = $360
Therefore, the total allocated overhead cost for Job 101 is $2,500 + $360 = $2,860. Adding this to the direct materials and direct labor costs, we get the total cost of Job 101: $1,500 + $1,000 + $2,860 = $5,680.
Learn more about overhead cost click here:
brainly.com/question/15996603
#SPJ11
The total allocated overhead cost for Job 101 is $2,500 + $360 = $2,860. Adding this to the direct materials and direct labor costs, we get the total cost of Job 101: $1,500 + $1,000 + $2,860 = $5,680.
The total cost of Job 101 in Test Company is $5,680. This cost consists of direct materials, direct labor, and allocated overhead costs. Direct materials amount to $1,500, while direct labor costs $1,000. The allocated overhead costs are determined using the activity-based cost system.
In the first activity, moving materials, the estimated cost is $45,000, and the cost driver is inspection hours. The estimated usage of inspection hours is 1,800. For Job 101, 100 inspection hours were reported. To allocate the cost of moving materials to Job 101, we can use the following calculation:
Allocation rate = Estimated cost / Estimated usage = $45,000 / 1,800 inspection hours = $25 per inspection hour Allocated cost for moving materials = Allocation rate × Actual usage = $25 × 100 inspection hours = $2,500
In the second activity, inspecting products, the estimated cost is $16,200, and the cost driver is material moves. The estimated usage of material moves is 3,600. For Job 101, 80 material moves were reported. To allocate the cost of inspecting products to Job 101, we can use the following calculation:
Allocation rate = Estimated cost / Estimated usage = $16,200 / 3,600 material moves = $4.50 per material move .Allocated cost for inspecting products = Allocation rate × Actual usage = $4.50 × 80 material moves = $360
Therefore, the total allocated overhead cost for Job 101 is $2,500 + $360 = $2,860. Adding this to the direct materials and direct labor costs, we get the total cost of Job 101: $1,500 + $1,000 + $2,860 = $5,680.
Learn more about overhead cost click here:
brainly.com/question/15996603
#SPJ11
a) Distinguish between joint products and by-products and provide an example of an industry that manufactures both joint products and by-products. Describe briefly, the FOUR (4) different methods of allocating joint costs to products.
Joint products and by-products are the two types of products that are produced during the manufacturing process. The main difference between them is that joint products are two or more products that are made from the same raw material, whereas by-products are products that are produced alongside the main product.
Differentiating joint products and by-products Joint products are products that are produced as a result of a single manufacturing process. The raw materials are used to produce these products in equal proportions, and each product has a significant value.
For instance, crude oil is converted into different joint products such as gasoline, diesel, and lubricating oils. By-products are the products that are manufactured alongside the main product. They are produced as a result of a manufacturing process that is meant to produce the main product.
For example, producing cornflakes can result in several by-products, such as corn oil, which can be sold separately or used in other products. Industries that manufacture both joint products and by-products include oil refineries, food processing plants, and chemical plants.
Four different methods of allocating joint costs to products1. Physical units method This method involves allocating joint costs based on the number of units that are produced. This method is suitable when joint products are produced in equal proportions.
To know more about alongside visit:
https://brainly.com/question/2034975
#SPJ11
Project Y requires a $304,500 investment for new machinery with a six-year life and no salvage value. The project ylelds the following annual results. Cash flows occur evenly within each year. ( PV of $1. FV of $1. PVA of $1, and FVA of $1) (Use appropriate factor(s) from the tables provided.) 2. Determine Project Y's payback period.
Project Y requires a $304,500 investment for new machinery with a six-year life and no salvage value. The project yields the following annual results.
Cash flows occur evenly within each year:Year Cash Flow1 $88,0002 $77,0003 $66,0004 $55,0005 $44,0006 $33,000Calculation of average annual cash inflow:Average Annual Cash Inflow = Total Cash Inflow / Life of the Asset= (88,000 + 77,000 + 66,000 + 55,000 + 44,000 + 33,000) / 6= $363,000 / 6= $60,500The Payback period is the period in which the investment is recouped.
The formula for Payback Period= Investment Required / Annual Net Cash Inflow= $304,500 / $60,500= 5.03 years≈ 5 years (to nearest whole year)The payback period for Project Y is 5 years or less.
To know more about investment visit:
https://brainly.com/question/15105766
#SPJ11
Government reporting of nonfinancial measures are discussed in Concept Statements No. ______ and ______.
Government reporting of non financial measures is discussed in Concept Statements No. 1 and No. 2.
Concept Statement No. 1, "Objectives of Financial Reporting," provides a framework for financial reporting that includes both financial and nonfinancial measures. It emphasizes the importance of reporting information that is relevant and useful for decision-making and accountability. Concept Statement No. 2, "Service Efforts and Accomplishments Reporting," specifically addresses the reporting of nonfinancial measures in government entities. It highlights the significance of reporting on the outputs, outcomes, and efficiency of government services to assess their effectiveness and demonstrate accountability to the public.
learn more about:- Accomplishments Reporting here
https://brainly.com/question/32599958
#SPJ11
Question 1.) With the aid of a diagram, illustrate and discuss Locational operations (as in transportation/warehousing) in operations management with proper examples. PLEASE WRITE 250−300 WORDS, THANK YOU.
Locational operations are important in operations management, especially in transportation and warehousing. This is because the location of a facility can have a significant impact on how effective and efficient its operations are.
In this answer, we will discuss locational operations in detail, including their importance and how they are used in operations management. We will also provide examples of how they are used in the transportation and warehousing industries.
Locational operations refer to the strategic decision-making process of selecting the best location for a facility. It involves assessing the suitability of a location in terms of the availability of resources, proximity to customers and suppliers, cost of transportation, and other factors. The goal is to find the most optimal location that will help the facility achieve its goals in the most efficient and cost-effective way possible.
The importance of locational operations can be seen in the impact that location has on the success of a facility. A poorly located facility may struggle to attract customers or may have high transportation costs that reduce its profitability. On the other hand, a well-located facility can help a company gain a competitive advantage by reducing costs and improving efficiency.
In the transportation industry, locational operations are critical in determining the best routes to take and the most efficient way to transport goods. For example, a company may decide to open a new warehouse in a location that is closer to its customers to reduce transportation costs and delivery times. Alternatively, a company may choose to locate its warehouse in a central location that is equidistant from all its customers to reduce transportation costs.
In the warehousing industry, locational operations are important in determining the best location for a warehouse. A company may decide to locate its warehouse in a location that is close to its suppliers to reduce transportation costs and improve delivery times. Alternatively, a company may choose to locate its warehouse in a location that is closer to its customers to reduce transportation costs and improve customer satisfaction.
To know more about management visit:
https://brainly.com/question/32216947
#SPJ11
pleasant hills properties is developing a golf course subdivision that includes 250 home lots; 100 lots are golf course lots and will sell for $94,325 each; 150 are street frontage lots and will sell for $65,450. the developer acquired the land for $1,800,000 and spent another $1,400,000 on street and utilities improvement. compute the amount of joint cost to be allocated to the street frontage lots using value basis. (round your intermediate percentages to 2 decimal places.) multiple choice $1,920,000. $1,568,000. $1,080,000. $1,632,000. $720,000.
Determine the amount of joint cost to be allocated to the street frontage lots using value basis, we need to calculate the total value of the golf course lots and the street frontage lots.
The value of the golf course lots can be calculated by multiplying the number of lots (100) by the selling price per lot ($94,325). So, the total value of the golf course lots is
100 * $94,325 = $9,432,500.
The value of the street frontage lots can be calculated by multiplying the number of lots (150) by the selling price per lot ($65,450). So, the total value of the street frontage lots is
150 * $65,450 = $9,817,500.
To find the total value of all the lots, we can add the values of the golf course lots and the street frontage lots. Therefore, the total value of all the lots is
$9,432,500 + $9,817,500 = $19,250,000.
Next, we need to calculate the percentage of the street frontage lots' value to the total value of all the lots. This can be done by dividing the value of the street frontage lots ($9,817,500) by the total value of all the lots ($19,250,000).
To know more about cost visit:
https://brainly.com/question/32817332
#SPJ11
To add value for the customer the approach used in the "Flower of Service" model may
be used to:
a. differentiate the product
b. make the product more attractive
c. help focus the product
d. support a Game Theory approach
e. avoid a price war
The Flower of Service model is a graphical representation of the service model. To add value for the customer the approach used in the "Flower of Service" model may be used to differentiate the product, make the product more attractive, help focus the product, avoid a price war. .
Therefore, the Flower of Service model may help the company improve customer service and make it more efficient. The model helps businesses understand the importance of their services and the various factors that affect them.In addition to this, the model's seven petals represent different types of services. The center of the flower represents service delivery. The seven petals are listed below:
Information: Providing information to customers facilitates better decision-making and enhances the quality of service by reducing uncertainty.
Consultation: The business must offer advice to customers and inform them about its services, industry, and so on.
Customization: Providing customized services to meet the needs of various clients is a critical aspect of the service.
Billing: This petal refers to the way the business charges for its services, including payment options.
Delivery: The company must provide dependable service delivery, which includes on-time delivery and delivery quality.
Empathy: Customers are always looking for personalized and compassionate service, which can be difficult to achieve. To meet this need, firms must put themselves in their clients' shoes.
Responsiveness: To add value, the company must quickly respond to customer inquiries and concerns.
Overall, the Flower of Service model is a customer-centered approach that can be used to improve customer service, boost revenue, and enhance the customer experience.
To know more about customer visit:
https://brainly.com/question/31192428
#SPJ11
a stable set of traits that assists in explaining and predicting an individual's behavior is referred to as:
A stable set of traits that assists in explaining and predicting an individual's behavior is referred to as personality. Personality refers to the unique pattern of thoughts, feelings, and behaviors that characterizes an individual and distinguishes them from others. It encompasses various traits, characteristics, and tendencies that remain relatively consistent over time and across different situations.
Personality traits are enduring patterns of thoughts, emotions, and behaviors that influence how individuals perceive and interact with the world around them. These traits can include dimensions such as extraversion, agreeableness, conscientiousness, neuroticism, and openness to experience, among others. They contribute to individual differences in behavior and provide a framework for understanding and predicting how individuals are likely to respond in different situations.
Understanding an individual's personality can be valuable in various contexts, including psychology, organizational behavior, and interpersonal relationships. Personality assessments and theories, such as the Big Five model or Myers-Briggs Type Indicator (MBTI), are used to measure and classify personality traits, providing insights into an individual's behavioral tendencies and helping to explain and predict their behavior in different situations.
To learn more about, Behavior, click here, https://brainly.com/question/30187195
#SPJ11
The articles of incorporation for Novak Technology Inc. authorize the issueance of 100,000 preferred shares and 250,000 common shares. During a two-month period, Novak Technology Inc. completed these shareissuance transactions: March 23 Issued 12,000 common shares for cash of $10.00 per share. April12 Recerved inventory valued at $60,000 and equipment with a market value of $10,000 for 5,000 common shares. April 17 Issued 1,500\$2.25 preferred shares. The issue price was cash of $11.00 per share. Required: 1. Journalize the transactions: 2. Prepare the shareholders' equity section of the Novak Technology Inc. balance sheet for the transactions given in this exercise. Retained earnings has a balance of $65,000.
The balance of retained earnings ($65,000) is not affected by the share issuance transactions and remains unchanged in this exercise.
1. Journalize the transactions:
March 23:
Cash (12,000 shares × $10.00) 120,000
Common Stock 120,000
April 12:
Inventory 60,000
Equipment 10,000
Common Stock (5,000 shares) 50,000
Paid-in Capital in Excess of Par 20,000
April 17:
Cash (1,500 shares × $11.00) 16,500
Preferred Stock 3,375
Paid-in Capital in Excess of Par 13,125
2. Prepare the shareholders' equity section of the Novak Technology Inc. balance sheet:
Shareholders' Equity:
Common Stock:
- Authorized: 250,000 shares
- Issued: 17,000 shares $170,000
Preferred Stock:
- Authorized: 100,000 shares
- Issued: 1,500 shares $3,375
Paid-in Capital in Excess of Par:
- Common Stock $20,000
- Preferred Stock $13,125
Retained Earnings $65,000
Total Shareholders' Equity $271,500
Learn more about Cash here:
https://brainly.com/question/32508776
#SPJ11
The economy is in recession. Policymakers think that shifting the AD curve rightward by $200 billion would end the recession. A. If MPC = 0.8 and there is no crowding out, how much should Congress increase G to end the recession? B. If there is crowding out, will Congress need to increase G more or less than this amount?
The economy is in recession. Policymakers think that shifting the AD curve rightward by 200 billion would end the recession.
If MPC = 0.8 and there is no crowding out,The Multiplier formula is given as follows: Multiplier = 1/ (1 - MPC)If the economy is in recession, policymakers would want to shift the AD curve rightward by 200 billion to end the recession. This can be achieved by increasing government spending by 200 billion or reducing taxes by 200 billion.
To end the recession, we need to calculate the fiscal stimulus required to increase output by 200 billion. we have:
200 billion = (1 / (1- 0.8)) x change in government spending So,
200 billion = (1 / 0.2) x change in government spending change in government spending
= 200 billion x 0.2change in government spending
= 40 billion .
To know more about Policymakers visit:
https://brainly.com/question/2673409
#SPJ11
Risk management has become an integral part of the transport and freight management globally. Explain the typical risks which goods face on transportation from Denmark to Lusaka passing through modal choice selection, clearly giving examples.
Risk management is an essential aspect of transport and freight management. The process of transporting goods, whether domestically or internationally, poses many potential risks to cargo. Therefore, it is crucial to identify and mitigate these risks, which ensures the safe and timely delivery of goods.
Let's explore some of the typical risks that goods face when transported from Denmark to Lusaka, including modal choice selection. Modal choice selection: Modal choice refers to the decision of selecting the most appropriate mode of transportation based on the type of goods, the distance to be covered, and other relevant factors.
Different modes of transportation have varying levels of risk associated with them. Theft: Theft is one of the significant risks that goods face during transportation. Cargo theft is most common in high crime areas or areas with low-security standards, such as roadside stops, seaports, and airports.
For instance, a container carrying expensive products may be hijacked by thieves, and the goods will be stolen or sold at a lower price. Damage: Damage is a risk that may occur during transportation. Damage may be caused by improper packaging, rough handling of the goods, or poor transportation conditions.
For example, if delicate goods such as glassware are not appropriately packaged and handled, they may break or get damaged. Natural disasters: Natural disasters such as floods, hurricanes, or earthquakes can damage goods during transportation. Such disasters can lead to severe delays, damage to cargo, or loss of life.
To know more about delivery visit:
https://brainly.com/question/28197235
#SPJ11
which form of trade sales promotion involves price reductions offered to wholesalers and retailers that purchase or promote specific products?
The form of trade sales promotion that involves price reductions offered to wholesalers and retailers that purchase or promote specific products is known as trade discounts.
Trade discounts are a common strategy used by manufacturers or suppliers to incentivize wholesalers and retailers to buy or promote their products. These discounts are typically given as a percentage reduction from the list price of the product. Wholesalers and retailers can take advantage of trade discounts by purchasing in larger quantities or actively promoting the products to their customers.
By offering trade discounts, manufacturers can encourage channel partners to increase their sales volume and market the products effectively. It helps create mutually beneficial relationships between producers and intermediaries, driving sales and fostering brand loyalty in the distribution chain.
To learn more about trade discounts click here
https://brainly.com/question/30849708
#SPJ11
Summer Tyme, Inc., is considering a new three-year expansion project that requires an initial fixed asset investment of $3.9 million. The fixed asset will be depreciated straight- line to zero over its three-year tax life, after which time it will have a market value of $210,000. The project requires an initial investment in net working capital of $300,000. The project is estimated to generate $2,650,000 in annual sales, with costs of $840,000. The tax rate is 35 percent and the required return on the project is 12 percent. The cash flow from assets in Year 0 is $[ ; ] the cash flow from assets in Year 1 is $[ ; ] the cash flow from assets in Year 2 is $[ ] from assets in Year 3 is $[ 1]. The NPV for this project is $ ; and the cash flow (Do not include the dollar signs ($). Negative amount should be indicated by a minus sign. Round your answers to 2 decimal places. (e.g., 32.16))
The NPV for this project is $625,273.
To calculate the net cash flows for each year, we need to consider the different components involved. In Year 0, the net cash flow is the initial fixed asset investment plus the initial investment in net working capital. Thus, the net cash flow in Year 0 is $3.9 million + $300,000 = $4.2 million.
In Year 1, we need to calculate the operating cash flow. It is equal to the sales revenue minus the costs and taxes. The operating cash flow in Year 1 is ($2,650,000 - $840,000) × (1 - 0.35) = $1,365,000.
In Year 2, the operating cash flow remains the same at $1,365,000.
In Year 3, we need to consider the salvage value of the fixed asset. The market value of the asset is $210,000, which will be received at the end of Year 3.
Additionally, we calculate the tax savings from the depreciation expense, which is ($3.9 million / 3) × 0.35 = $455,000. The operating cash flow in Year 3 is ($2,650,000 - $840,000 - $455,000) × (1 - 0.35) + $210,000 = $1,100,250.
To calculate the net present value (NPV), we discount the net cash flows at the required return rate of 12 percent. Using the NPV formula, the present value of the cash flows is:
NPV = -$4,200,000 + ($1,365,000 / 1.12) + ($1,365,000 / 1.12^2) + ($1,100,250 / 1.12^3) = $625,273.
Therefore, the NPV for this project is $625,273.
For more such questions project,Click on
https://brainly.com/question/28466303
#SPJ8
A firm requires an investment of $30,000 and borrows $15,000 at 8%. If the return on equity is 22% and the tax rate is 25%, what is the firm's WACC? A. 14% B. 16.8% C. 28% D. 112%
A firm requires an investment of $30,000 and borrows $15,000 at 8%. If the return on equity is 22% and the tax rate is 25%, the firm's WACC can be calculated as follows: The firm's weighted average cost of capital (WACC) is calculated by weighting the cost of equity and the cost of debt by the respective proportions of equity and debt in the company's capital structure.
It's a useful measure for determining a company's required rate of return and evaluating investment opportunities.The formula for calculating WACC is: WACC = (E/V x Re) + ((D/V x Rd) x (1-Tc)), where
E = market value of the firm's equity
D = market value of the firm's debt
V = total value of the firm (E + D)
Re = cost of equity
Rd = cost of debt
Tc = corporate tax rate
Given, investment of $30,000 and borrowing of $15,000 at 8%, and return on equity of 22%, tax rate of 25%.Total capital = $30,000 + $15,000 = $45,000
Equity = $30,000, Debt = $15,000
Equity portion = ($30,000/$45,000) = 2/3, and Debt portion = ($15,000/$45,000) = 1/3.
The cost of debt is 8% and the tax rate is 25%, thus the after-tax cost of debt = 8% x (1 - 0.25) = 6%.
The cost of equity is given as 22%.
Therefore, WACC = (2/3 × 22%) + (1/3 × 6%) × (1 - 0.25) = 14%.
Therefore, the firm's WACC is 14%.Option A is the correct answer.
To know more about investment visit :
https://brainly.com/question/14921083
#SPJ11
Acoma, Incorporated, has determined a standard direct materials cost per unit of $6.40 (2 feet × $3.20 per foot). Last month, Acoma purchased and used 4,450 feet of direct materials, for which it paid $13,795. The company produced and sold 2,030 units during the month. Required: Calculate the direct materials price, quantity, and spending variances. Note: Indicate the effect of each variance by selecting "F" for favorable, "U" for unfavorable, and "None" for no effect (i.e., zero variance). Round your intermediate calculations to 2 decimal places.
Direct Materials Price Variance. 267 (is wrong)
Direct Materials Spending Variance. 981 (is wrong)
Calculation of Direct Materials Variances Direct Materials Cost per unit = 2 feet × $3.20 per foot = $6.40
Standard Quantity of Direct Material = 2 feet per unit Actual Quantity of Direct Material purchased = 4450 feet Actual price per unit of Direct Material = $13,795 / 4450 feet = $3.10 per foot
Direct Materials Price Variance
The difference between the actual price of a unit of input and the budgeted price of that unit is called direct materials price variance.
The formula for direct materials price variance is as follows:
Direct Materials Price Variance = (Actual Quantity × Actual Price) - (Actual Quantity × Standard Price)
DM Price Variance = (4,450 × 3.10) - (4,450 × 3.20)
DM Price Variance = $(13,795) - $(14,240)
DM Price Variance = $(445)F( avowable )
Direct Materials Quantity Variance
The difference between the actual quantity of an input and the budgeted quantity of that input is called direct materials quantity variance.
The formula for direct materials quantity variance is as follows:
Direct Materials Quantity Variance = (Actual Quantity × Standard Price) - (Standard Quantity × Standard Price)
DM Quantity Variance = (4,450 × 3.20) - (2,030 × 3.20)
DM Quantity Variance = $14,240 - $6,496
DM Quantity Variance = $7,744F(avowable)
Direct Materials Spending Variance
The difference between the actual cost of an input and the budgeted cost of that input is called direct materials spending variance.
The formula for direct materials spending variance is as follows:
Direct Materials Spending Variance = Actual cost - (Actual Quantity × Standard Price)
DM Spending Variance = $13,795 - (4,450 × 3.20)
DM Spending Variance = $13,795 - $14,240
DM Spending Variance = $(445)U(unfavorable)
the direct materials price variance is $(445) F(avowable),
the direct materials quantity variance is $7,744 F(avowable),
and the direct materials spending variance is $(445) U(unfavorable).
To know more about Materials visit:
https://brainly.com/question/30503992
#SPJ11
What is the occupancy cost for a retail tenant occupying 1,250sf
with gross annual rent of $20psf and annual sales of $300,000?
The formula for calculating the occupancy cost of a retail tenant is as follows:
Occupancy Cost = (Gross Annual Rent x Occupancy Percentage) + Additional Occupancy Costs.
Now, let's calculate the occupancy cost for a retail tenant occupying 1,250sf with gross annual rent of $20psf and annual sales of $300,000.
First, let's determine the Gross Annual Rent paid by the tenant:
Gross Annual Rent = Rent per square foot x Square feet occupied Gross Annual Rent = $20 x 1,250 Gross Annual Rent = $25,000.00
Now, we need to determine the Occupancy Percentage:
Occupancy Percentage = Rent / Annual Sales Occupancy Percentage = $25,000 / $300,000 Occupancy Percentage = 0.0833 or 8.33%Finally, let's calculate the occupancy cost:
Occupancy Cost = (Gross Annual Rent x Occupancy Percentage) + Additional Occupancy CostsOccupancy Cost = ($25,000 x 0.0833) + Additional Occupancy Costs
Since we do not have any information about additional occupancy costs, we will assume that there are none.
Occupancy Cost = $2,082.50
Therefore,
the occupancy cost for a retail tenant occupying 1,250sf with gross annual rent of $20psf and annual sales of $300,000 is $2,082.50.
To know about retail tenant visit:
https://brainly.com/question/30268050
#SPJ11
1.
Write a proper (Operational Plan) on a Solar Battery manufacturing
& distribution business.
Operational Plan on a Solar Battery Manufacturing and Distribution BusinessOperational Plan is one of the essential components of a business plan. It explains how an organization operates and functions. It is a plan for planning, implementing, and maintaining operations. The following is an operational plan on a solar battery manufacturing and distribution business.
Products and ServicesThe company's main product is the manufacture and distribution of solar batteries. The organization will sell the batteries to consumers directly. The solar batteries are for both commercial and residential use. The batteries will come in various sizes and capacities. The company will sell the batteries to local solar energy installers. The company will provide maintenance services for the batteries. The organization will also offer installation services for their customers.LocationThe company will operate from a rented factory in an industrial park. The industrial park is located in a convenient and accessible area for transportation of raw materials and finished products.
To know more about Operational visit:
https://brainly.com/question/30581198
#SPJ11
During the coaching process; Mediation is an example of
Effective Communication.
Direct Communication.
Indirect Communication.
None of the above.
Mediation is a form of indirect communication that takes place during the coaching process.
Mediation is an effective communication approach that aids parties to recognize and better understand their variations, preferences, and motivations through a third party’s impartial mediation. This third party is an experienced, competent mediator.
It is a dynamic and interactive method of communication that creates an atmosphere in which participants can communicate directly with one another and feel safe sharing their emotions without fear of rejection.
A mediator operates as an impartial third party, whose responsibility is to help all parties in reaching an agreement that suits everyone's interests.
In summary, mediation involves a neutral third party that facilitates discussions between the involved parties, allowing them to solve their conflicts by listening to each other's opinions and working to achieve a compromise.
To Know more about motivations
https://brainly.com/question/9880948
#SPJ11
A commercial company that promotes its public-spirited attitude, for example by supporting a plastics recycling scheme, is most likely to be:
A.
Societal market orientation.
B.
All of the above.
C.
Market orientation.
D.
Sales orientation.
A commercial company that promotes its public-spirited attitude, for example by supporting a plastics recycling scheme, is most likely to be : Societal market orientation. Option A is correct .
An organization's marketing strategies and operations will also be influenced by its key focus areas. The approach will determine how the company will introduce its product to any market and empower marketing teams and efforts.
The cultural market direction approach is a more current center procedure and model. A lot of data and information can be easily shared across geographies, even in real time, and the model has evolved as consumers and ordinary people have become more aware and educated. Associations that follow the cultural market direction model will zero in on the effect that the association and its cycles and items have on social orders and the climate.
Learn more about market orientation :
brainly.com/question/32937326
#SPJ4
