Assume MARR =21%, and four mutually exclusive projects are
available with ROR values of A i=22%, B i=19%, C i=33%, and D i=21
% which projects should be selected?

Answers

Answer 1

Based on the provided information and assuming the Minimum Acceptable Rate of Return (MARR) is 21%, the projects that should be selected are Project A and Project D.

To determine which projects should be selected, we compare the Rate of Return (ROR) values of each project to the MARR of 21%. Project A has a ROR of 22%, which is higher than the MARR. Therefore, Project A meets the investment criteria and should be selected. Project B has a ROR of 19%, which is lower than the MARR. Thus, Project B does not meet the investment criteria and should be rejected.Project C has a ROR of 33%, which is significantly higher than the MARR. However, since it is stated that the projects are mutually exclusive, only one project can be selected. In this case, Project C's high return does not justify its selection over Projects A and D, which meet the investment criteria and have returns close to the MARR.Project D has a ROR of 21%, which is equal to the MARR. While it doesn't offer a higher return, it meets the investment criteria and can be considered as a viable option.

learn more about projects here :

https://brainly.com/question/28476409

#SPJ11


Related Questions

Taxation, Distribution of Income and Resource Allocation
First, explain how society decides rationally on how much equality it wants relative to income distribution. Next, discuss the policies available to the government to distribute income and the impact such policies may have on the microeconomy. Then, explain how despite economists use of economic analysis to provide suggestions for responding to economic problems (i.e. housing crisis, financial crisis, Recession) the economy still often confronts market’s short-comings that deeply impact consumers and producers. Lastly, using any graph of your choice from the textbook, graphically illustrate your explanation.

Answers

Society determines income equality based on rational considerations, and government policies impact the microeconomy and address market failures.

Society determines the desired level of income equality based on rational considerations, such as ethical values, social norms, and economic efficiency. Government policies play a crucial role in income distribution, including progressive taxation, welfare programs, minimum wage regulations, and wealth redistribution. These policies can impact the microeconomy by influencing incentives, labor supply, investment decisions, and overall economic productivity. Despite economic analysis, markets can still face shortcomings due to various factors such as externalities, market power, information asymmetry, and behavioral biases.

These imperfections can lead to market failures, resulting in suboptimal outcomes for consumers and producers. Government intervention, through regulation, public goods provision, and targeted policies, is often necessary to address these market failures and promote economic stability and welfare. A graph illustrating this explanation could show the impact of a market failure, such as negative externalities, where the social cost exceeds the private cost, leading to an inefficient allocation of resources.

Learn more about taxation here:

https://brainly.com/question/1687138

#SPJ11

A gambler will be playing three consecutive games with friends tonight. For each game, he will have the opportunity to place an even bet that he will win; the amount bet can be any quantity of his choice between zero and the amount of money he still has left after the bets on the preceding games. For each game, the probability is 0.6 that he will win the game and thus win the amount bet, whereas the probability is 0.4 that he will lose the game and thus lose the amount bet. He will begin with $75, and his goal is to have $100 at the end. (Because these are friendly games, he does not want to end up with more than $100.) Therefore, he wants to find the optimal betting policy that maximizes the probability that he will have exactly $100 after the three games. Use dynamic programming to solve this problem. Clearly defıne stages, states, decision variables and recursive function.

Answers

The given problem can be solved by using dynamic programming. Dynamic programming is an optimization method that deals with problems where the solution can be obtained by solving subproblems. The problem can be broken down into subproblems, and the optimal solution can be obtained by using the solutions of these subproblems. The solution for the given problem using dynamic programming can be obtained as follows:

Stages: There are three stages in the given problem. The first stage is the beginning of the game. The second stage is after the first game is over. The third stage is after the second game is over.

States: The states for the given problem can be defined as follows:

S1: The gambler has not yet played any game.

S2: The gambler has played one game and won the game.

S3: The gambler has played one game and lost the game.

S4: The gambler has played two games and won both games.

S5: The gambler has played two games and won the first game but lost the second game.

S6: The gambler has played two games and lost the first game but won the second game.

S7: The gambler has played two games and lost both games.

S8: The gambler has played three games and won all three games.

S9: The gambler has played three games and won the first two games but lost the third game.

S10: The gambler has played three games and won the second two games but lost the first game.

S11: The gambler has played three games and won the first game but lost the second game and won the third game.

S12: The gambler has played three games and lost the first game but won the second game and won the third game.

S13: The gambler has played three games and won the first game but lost the second game and lost the third game.

S14: The gambler has played three games and lost the first game but won the second game and lost the third game.

S15: The gambler has played three games and lost the first two games but won the third game.

S16: The gambler has played three games and lost all three games.

Decision Variables: The decision variables for the given problem can be defined as follows:

X1: The amount bet by the gambler in the first game.

X2: The amount bet by the gambler in the second game.

X3: The amount bet by the gambler in the third game.Recursive Function: The recursive function for the given problem can be defined as follows:-

f(Si) = max{f(Sj) * Pij}Where Si is the state of the gambler after playing I games. Pij is the probability of moving from state Si to state Sj by placing a bet. The final optimal policy that maximizes the probability that the gambler will have exactly $100 after the three games can be obtained by solving the subproblems for all the possible states of the gambler.

Thus, the optimal betting policy that maximizes the probability that the gambler will have exactly $100 after the three games can be obtained using dynamic programming. The problem can be broken down into subproblems, and the optimal solution can be obtained by using the solutions of these subproblems. The stages, states, decision variables, and recursive functions for the given problem can be defined, and the optimal policy can be obtained by solving the subproblems for all the possible states of the gambler.

brainly.com/question/32616633

#SPJ11

A gambler wants to maximize his probability of ending up with $100 after playing three consecutive games.

The amount bet can be any quantity of his choice between zero and the amount of money he still has left after the bets on the preceding games. For each game, the probability is 0.6 that he will win the game and thus win the amount bet, whereas the probability is 0.4 that he will lose the game and thus lose the amount bet. He begins with $75, and his goal is to have $100 at the end. Therefore, he wants to find the optimal betting policy.

Use dynamic programming to solve this problem. Clearly define stages, states, decision variables, and recursive function

The problem can be solved using dynamic programming, in which we start from the last stage and move backward in time, calculating the expected value of the states at each stage. The problem can be broken down into three stages, with each stage representing the game that is being played. Let us define the variables:

S1 = 75 - initial state

S2 = amount won or lost in the first game

S3 = amount won or lost in the second game

S4 = amount won or lost in the third game

S5 = amount of money gambler wants to end up with. Decision variables:

B1 = amount bet in the first game

B2 = amount bet in the second game

B3 = amount bet in the third game

At the last stage, when the third game is played, the gambler will have either won or lost the game. If he has won the game, then his total amount of money will be S4 + B3, and if he has lost, then his total amount of money will be S4 - B3. Hence, we can define the states as:

State 1: (S1, 0, 0, 0, 100)

State 2: (S1, B1, 0, 0, 100) or (S1, -B1, 0, 0, 100)

State 3: (S1-B1, B2, 0, 0, 100) or (S1+B1, B2, 0, 0, 100) or (S1-B1, -B2, 0, 0, 100) or (S1+B1, -B2, 0, 0, 100)

State 4: (S1-B1-B2, B3, 0, 0, 100) or (S1+B1-B2, B3, 0, 0, 100) or (S1-B1+B2, B3, 0, 0, 100) or (S1+B1+B2, B3, 0, 0, 100) or (S1-B1-B2, -B3, 0, 0, 100) or (S1+B1-B2, -B3, 0, 0, 100) or (S1-B1+B2, -B3, 0, 0, 100) or (S1+B1+B2, -B3, 0, 0, 100)At each stage, the gambler needs to decide on the amount he wants to bet to maximize his probability of ending up with $100. We can define the recursive function as follows:

V(i, j, k, l, m) = 0.6 * max{V(i+j, p, q, l, m) + Bk} + 0.4 * max{V(i-j, p, q, l, m) - Bk}

where i represents the initial state, j represents the amount won or lost in the previous game, k represents the decision variable, l represents the amount won or lost in the second game, and m represents the amount of money gambler wants to end up with.

Based on this recursive function, we can create a table of optimal bets for each stage. At the first stage, the gambler does not bet anything and moves on to the second stage. At the second stage, he bets the entire amount if he lost the first game and bets the maximum amount that gives him a probability of ending up with $100 if he won the first game. At the third stage, he bets the maximum amount that gives him a probability of ending up with $100, given the outcome of the second game. By using dynamic programming, we can find the optimal betting policy that maximizes the probability that he will have exactly $100 after the three games.

Learn more about dynamic programming: https://brainly.com/question/30885026

#SPJ11

Suppose the inverse demand curve on ore is given by P = 72 - 0.44 Q. Ore can be either mined or obtained through a recycling program. The marginal cost of mining is MC1 = 6 q1. The marginal cost of obtaining ore through recycling is MC2 = 14 + 4 q2. What percent of total demand is satisfied by recycled ore (express your answer in percentage, i.e., if the answer is 45.34% then enter 45.34)?

Answers

To determine the percentage of total demand satisfied by recycled ore, we need to compare the quantity of ore obtained through recycling (q2) to the total quantity demanded (Q).

The quantity demanded can be found by setting the inverse demand equation equal to price (P):

P = 72 - 0.44Q

To find the equilibrium quantity, we set price equal to marginal cost for each method of obtaining ore:

For mining:

MC1 = 6q1

For recycling:

MC2 = 14 + 4q2

Equating the prices to the respective marginal costs and solving for the quantities, we have:

72 - 0.44Q = 6q1 ----(1)

72 - 0.44Q = 14 + 4q2 ----(2)

Solving equations (1) and (2) simultaneously will give us the values of q1 and q2, which represent the quantities obtained through mining and recycling, respectively.

Once we have the values of q1 and q2, we can calculate the percentage of total demand satisfied by recycled ore using the formula:

Percentage of demand satisfied by recycled ore = (q2 / Q) * 100

Please provide the value of Q (total quantity demanded) in order to proceed with the calculation.

To know more about price visit-

brainly.com/question/14032868

#SPJ11

Describe your first impression of SAP
What types of skills are necessary to use this system?
Describe a possible error that SAP would catch throughout this
process (anything you could think of). Do no

Answers

SAP is a comprehensive enterprise software system, and initial impressions may vary. The necessary skills to use SAP include knowledge of business processes, technical proficiency, problem-solving abilities, and attention to detail. SAP has built-in error-checking mechanisms that can catch various types of errors, such as data inconsistencies, invalid entries, or unauthorized actions.

SAP, or Systems, Applications, and Products, is a complex enterprise software system that provides integrated solutions for various business functions such as finance, human resources, supply chain management, and customer relationship management. As an AI language model, I don't have personal experiences, but SAP's reputation is based on its capabilities and functionalities, which are highly regarded in the industry.

To effectively use SAP, individuals need a combination of technical and business skills. They should have a deep understanding of the organization's business processes and how SAP modules align with them. Technical proficiency in navigating the system, entering data, generating reports, and troubleshooting is essential. Problem-solving abilities are crucial for identifying and resolving issues that may arise during system usage. Attention to detail is important to ensure accurate data entry and adherence to system processes and guidelines.

SAP is designed with robust error-checking mechanisms to prevent and catch errors throughout the process. For example, it may include data validation rules to ensure data consistency and integrity. It can detect invalid entries, such as entering text in a numeric field, and provide error messages to prompt users to correct them. SAP also includes user authorization controls to prevent unauthorized actions or access to sensitive data. These built-in error-checking mechanisms help maintain data accuracy, system reliability, and adherence to business rules and policies.

Learn more about data consistency here:

https://brainly.com/question/32180603

#SPJ11

1. Beginning Inventory $10,000 2. Ending Inventory $5,000 3. Net Purchases $55,000 Required: Calculate the Cost of Goods Sold: A) $60,000 B) $55,000 O $36,000 D $15,000

Answers

The Cost of Goods Sold is $60,000. Among the given options the correct answer is option A.

We can use the following formula to calculate the cost of goods sold (COGS).

COGS = Beginning Inventory + Net Purchases − Ending Inventory

Given, Beginning Inventory = $10,000, Ending Inventory = $5,000, Net Purchases = $55,000

Substituting these values in the formula:

COGS = $10,000 + $55,000 − $5,000COGS = $60,000

Therefore, the cost of goods sold is $60,000.

The cost of goods sold is an important metric that represents the cost of all goods sold by a company during a certain period of time. It is calculated by subtracting the ending inventory from the sum of the beginning inventory and the net purchases. In this problem, the cost of goods sold is $60,000.

To know more about COGS visit:

brainly.com/question/17316734

#SPJ11

Use the Heckscher-Ohlin model to analyse the long-run consequences of a reduction in capital. There are two factors of production: labour and capital. There are two sectors of economic activity: manufacturing and services. Manufacturing and services use labour and capital for production. Manufacturing goods are capital-intensive and services are labour- intensive. Labour and capital are both mobile across sectors. The price of the manufacturing good and of services are determined in the global market and are not affected by develop- ments in the UK. 4. Draw a box diagram to describe the pre-Brexit equilibrium. Depict the labour force on the horizontal axis and capital on the vertical axis. The service sector starts at the lower-left corner and the manufacturing sector at the upper-right corner. Denote the original point of equilibrium by B and show the split of labour and capital across the two sectors. Show that manufacturing is capital-intensive and services are labour- intensive.

Answers

The Heckscher-Ohlin model is used to analyze the long-run consequences of a reduction in capital in an economy with two factors of production (labour and capital) and two sectors (manufacturing and services). In this model, manufacturing goods are capital-intensive, while services are labor-intensive. The equilibrium is determined by the global market prices of the goods, and both labor and capital are mobile across sectors.

In the pre-Brexit equilibrium, we can depict the Heckscher-Ohlin model using a box diagram. The horizontal axis represents the labor force, and the vertical axis represents capital. The service sector is located at the lower-left corner, while the manufacturing sector is at the upper-right corner.

The original equilibrium point, denoted as B, represents the allocation of labor and capital across the two sectors.

Since manufacturing goods are capital-intensive, a larger share of capital is allocated to the manufacturing sector, leading to a higher vertical position on the graph for manufacturing compared to services. Conversely, services being labor-intensive are allocated a larger share of the labor force, resulting in a higher horizontal position for services compared to manufacturing.

The box diagram visually illustrates the capital-intensity of manufacturing and the labor-intensity of services in the economy. This representation highlights the relative importance of capital and labor in each sector and helps analyze the implications of a reduction in capital on the economy in the long run.

Learn more about equilibrium here :

https://brainly.com/question/28643582

#SPJ11

solve in 40 mins i will thumb up
18. Answer all parts of this question (a) [8 marks] Explain the main features of Cournot competition. How the total welfare under Cournot competition compared with the case of perfect competition? (b)

Answers

(a) Cournot competition is an oligopoly market structure in which firms determine their output levels while taking into account the output levels of their rivals.

Cournot competition is named after Antoine-Augustin Cournot, who provided the first mathematical analysis of oligopoly in 1838. Each firm in the market will determine its output level by anticipating the output level of its competitors. The price of a product in Cournot competition is determined by the aggregate level of supply in the market. Cournot competition is characterized by the following features:

Every firm has a non-zero marginal cost of production and the same marginal cost of production.The product sold by all firms is identical and homogeneous. Every firm produces and sells its output independently.Each firm determines its output level at the same time, taking into account the output level of its competitors.

The total welfare under perfect competition is higher than under Cournot competition because the output is higher and the price is lower under perfect competition. In Cournot competition, there is less output and a higher price, which leads to a deadweight loss of consumer surplus, producer surplus, and social welfare.

To know more about Cournot competition click here:

https://brainly.com/question/16199625

#SPJ11

a natural correction to employer discrimination in market economies is the

Answers

The separation of investment decisions from financing decisions is a fundamental principle in financial management. Here are a few reasons why these decisions are typically treated separately:

Different Objectives: Investment decisions and financing decisions serve distinct objectives. The investment decision focuses on identifying and selecting projects or assets that generate returns and create value for the company. It involves evaluating the profitability, risk, and feasibility of investment opportunities. On the other hand, financing decisions involve determining the optimal mix of capital sources (debt, equity, etc.) to fund these investments and meet the company's financial requirements.

Risk and Return Considerations: Investment decisions primarily revolve around assessing the risk and return characteristics of various investment opportunities. Managers need to evaluate the potential cash flows, profitability, and risks associated with each project. Financing decisions, on the other hand, focus on determining the most appropriate capital structure to fund these investments while considering factors such as cost of capital, financial risk, and capital market conditions.

Timing and Flexibility: Investment decisions often involve long-term commitments, while financing decisions can be more short-term in nature. By separating the two, companies can make investment decisions based on the long-term potential of projects without being limited by immediate financing constraints. This approach allows for greater flexibility and ensures that the investment decisions are driven by strategic considerations rather than short-term financial constraints.

Strategic Alignment: Separating investment decisions from financing decisions allows management to align their investment strategies with the overall strategic objectives of the company. It ensures that investment decisions are made based on the project's merits and its fit with the company's long-term goals, rather than being influenced by the availability or cost of financing.

Risk Management: By separating investment and financing decisions, companies can better manage their risk exposure. They can evaluate and select investment opportunities based on their individual risk profiles and expected returns. At the same time, financing decisions can be structured to optimize the company's risk exposure by considering factors such as interest rate risk, currency risk, and the company's overall risk tolerance.

While it is important to separate investment and financing decisions, it is crucial to maintain communication and coordination between the two areas. A comprehensive financial management approach considers the interplay between investment decisions and financing decisions to ensure the overall financial health and success of the company.

Learn more about investment decisions here:

https://brainly.com/question/32339843

#SPJ11

The profit motive can serve as a natural correction to employer discrimination in market economies.

The natural correction to employer discrimination in market economies is the profit motive.What is discrimination?Discrimination is an act of treating people unjustly based on their color, gender, religion, age, nationality, or any other factors. Discrimination occurs when a person or group is treated unfairly, often leading to exclusion from social activities, education, and employment opportunities. Discrimination can occur at the individual, institutional, and structural levels.The natural correction to employer discrimination in market economies is the profit motive.What is a market economy?A market economy is a type of economic system in which the prices of goods and services are determined by supply and demand. In a market economy, individuals and companies make economic decisions and determine the prices of goods and services based on their assessment of the market. The government plays a limited role in a market economy and is primarily responsible for ensuring the functioning of the market system.What is the profit motive?The profit motive is the driving force behind a market economy. Individuals and companies engage in economic activities to make a profit, which is the difference between the revenue generated by the sale of goods or services and the cost of production. Profit motive encourages companies to develop new products, improve quality, and reduce costs to remain competitive in the market. Companies that do not respond to the profit motive by increasing profits may go out of business.What is the relationship between employer discrimination and the profit motive in a market economy?Employer discrimination in a market economy can negatively affect profits. If a company discriminates against a group of workers, it may lose potential customers from that group or lose valuable employees. Furthermore, if a company is not hiring the best employees available, it may reduce its overall productivity and competitiveness.

Learn more about market economies here :-

https://brainly.com/question/30714952

#SPJ11

Which of the following is likely to occur during a downturn in
the business cycle?
Multiple Choice
None of these choices are correct.
increased aggregate demand
lower inventories
lower real ou

Answers

During a downturn in the business cycle, a lower real output is likely to occur. Real output is the output of the economy that has been adjusted to account for price changes that  refers to fluctuations in economic activity, defined by the increase and decrease in the production of goods and services.

The business cycle has four phases: expansion, peak, contraction, and trough. Downturns in the business cycle occur during the contraction are various effects of a downturn in the business cycle on the economy. Some of these are Lower real output.

During a downturn in the business cycle, the output of the economy  to lower real Lower inventories: During the contraction phase of the business cycle, businesses decrease production due to the decrease in demand for goods and services. This results in a decrease in unemployment: A downturn in the business cycle results in a decrease in production, which leads to job loss and increased unemployment. Therefore, the correct option is option C: Lower real  the contraction are various effects of a downturn in the business cycle on the economy. Some of these are Lower real output.

To know more about   business visit;  

https://brainly.com/question/13160849

#SPJ11

Wells, Inc., has identified an investment project with the following cash flows. Cash Flow 865 1,040 1,290 1,385 Year 1 a. If the discount rate is 8 percent, what is the future value of these cash flows in Year 4?

Answers

The future value of these cash flows in Year 4 if the discount rate is 8 percent is $5,193.86.

How to fidn?

Future Value (FV) is defined as the future worth of an amount of cash invested today. It is calculated based on the rate of interest, the present value of the amount, and the period of investment. In the question, Wells, Inc., has identified an investment project with the following cash flows.

The solution for the given problem is as follows:

,Step 1: First, calculate the future value of each of the cash flows individually using the formula, FV = PV x (1 + i)n, Where FV = Future value PV = Present Value, i = interest rate ,n = number of years, Cash flow 1, FV = $865 x (1+8%)³ = $1,160.06Cash flow 2, FV = $1,040 x (1+8%)² = $1,255.68, Cash flow 3, FV = $1,290 x (1+8%)¹ = $1,393.12Cash flow 4, FV = $1,385 x (1+8%)⁰ = $1,385.00

Step 2: Add up the future values of each cash flow to get the total future value.

Total FV = $1,160.06 + $1,255.68 + $1,393.12 + $1,385.00 = $5,193.86.

Therefore, the future value of these cash flows in Year 4 if the discount rate is 8 percent is $5,193.86.

To know more on discount rate visit:

https://brainly.com/question/13660799

#SPJ11

Question 4 Breda owns a gym. In her financial year ended 30 April 20X1 she buys a new exercise bike for £450. The date of purchase was 1 November 20X0. Breda aims to keep exercise bikes for three years. After three years she finds the bikes are usually well-worn and worth very little. She advertises old equipment to her members, and would usually expect to receive about £30 for an old exercise bike. Breda charges depreciation on exercise bikes using the straight-line method, with a time pro-rated charge in the first and final years of ownership, depending on the dates of acquisition and disposal. Required: a. Calculate the depreciation charge on the exercise bike for the years ended 30 April 20X1 and 20X2. (4 Marks) b. Calculate the cost, accumulated depreciation and net book value of the exercise bike as at 30 April 20X1 and 20X2. (6 Marks) c. Assume that on 31 January 20X3 Breda receives a cash offer for the bike for £250, and that she accepts the offer. Calculate the profit or loss on disposal of the bike (4 Marks) d. Write the journal entries for the sale of the bike. (4 Marks) e. What would be the figures appearing in the financial statements of the company at 31 December 20X1 and 20X2, using the information calculated. (4 Marks) f. Identify one other depreciation method and explain how Breda should choose which method to use. (3Marks)

Answers

Breda aims to keep exercise bikes for three years. After three years, she finds the bikes are usually well-worn and worth very little. She advertises old equipment to her members, and would usually expect to receive about £30 for an old exercise bike.

Breda charges depreciation on exercise bikes using the straight-line method, with a time pro-rated charge in the first and final years of ownership, depending on the dates of acquisition and disposal. Straight-line method of depreciation is a commonly used method of calculating depreciation over time. As per this method, the same amount of depreciation is deducted from the asset’s value for each year over its useful life. The straight-line depreciation rate is calculated as (Cost - Residual value) / Useful life.Calculation of depreciation for the years ended 30 April 20X1 and 20X2: Cost of the bike = £450 Life of the bike = 3 years. Therefore, annual depreciation = (£450-£30)/3 = £140 (rounded off)

Calculation of the cost, accumulated depreciation and net book value of the exercise bike as at 30 April 20X1 and 20X2: Note: The time pro-rated charge is calculated based on the period for which the asset was in use during the year under consideration. In 20X1 Cost: £450 Depreciation (from the above calculation) = £140 Time pro-rated depreciation for 213 days = (£140/365) * 213 = £82.08 Accumulated depreciation = £82.08 Net book value = Cost - accumulated depreciation = £367.92In 20X2 Cost: £450 Depreciation (from the above calculation) = £140 Time pro-rated depreciation for 365 days = (£140/365) * 365 = £140 Accumulated depreciation = £82.08 + £140 = £222.08 Net book value = Cost - accumulated depreciation = £227.92

The profit or loss on disposal of the bike: Sales price = £250 Net book value on 31 January 20X3 = £140 Profit or loss on disposal = Sales price - Net book value = £110 loss

Journal entries for the sale of the bike: On 31 January 20X3, the following journal entry will be made: Account Debit Credit Bank account£250 Disposal of exercise bike (loss)£110 Depreciation account£140

What would be the figures appearing in the financial statements of the company at 31 December 20X1 and 20X2, using the information calculated: As at 30 April 20X1: Balance sheet Fixed assets£367.92 Current assets Other assets£30 Profit and loss account Depreciation £82.08 As at 30 April 20X2:Balance sheet Fixed assets £227.92 Current assets Other assets£30Profit and loss account Depreciation £140

Identification of one other depreciation method and explanation on how Breda should choose which method to use: Another depreciation method is the reducing balance method. It is similar to the straight-line method, but the rate of depreciation is higher in the earlier years of the asset's life and reduces over time. This method is used when the asset's efficiency is higher in its early years, and its maintenance cost is lower. It is ideal for assets that will be replaced once they are worn out and those that are more efficient in the early years of their life. Breda can use the reducing balance method if the exercise bikes are more efficient in the early years of use. She should assess the maintenance cost and efficiency of the asset in its early years to determine if this method is more appropriate for the bikes. If the maintenance cost is high in the early years and the asset is equally efficient throughout its life, the straight-line method is more appropriate.

Breda uses the straight-line method to calculate depreciation on her exercise bikes. Based on the cost and life of the asset, the annual depreciation for each year is £140. The cost, accumulated depreciation, and net book value of the asset at the end of each financial year are calculated. When Breda receives a cash offer of £250 for the bike, she records a loss on disposal of £110. The journal entries for the sale of the bike are also shown. Finally, another method of depreciation, the reducing balance method, is identified and explained, and how Breda should choose which method to use is discussed.

To know more about straight-line method visit:

brainly.com/question/31435590

#SPJ11

Which of the following is not a type of appraisal
participation?
A.Goal setting
B. time talked
C.Value-expressive voice
D.Opinion expression
E.Tow-way communication

Answers

Among the following options, the option that is not a type of appraisal participation is time talked. Hence, the correct option is B.

Appraisal participation is a term that describes a process used by employees and their supervisors to help workers develop new skills, enhance job performance, and improve work quality. During an appraisal, employees are evaluated based on predetermined standards. Appraisals are used to determine whether employees are meeting the company's goals and objectives. They also provide employees with the feedback they need to improve their job performance.

Types of appraisal participation:

Goal setting - Goals can be used as an appraisal tool in which the employee and supervisor collaborate to establish specific, measurable, achievable, realistic, and time-bound (SMART) objectives that will help the employee achieve their job responsibilities.Value-expressive voice - This is a type of appraisal participation that refers to employees who use their voice to express their values, beliefs, or opinions about their job and their employer.Opinion Expression - During the appraisal process, employees can express their opinions about their job and their employer.Tow-way communication - Two-way communication is a type of appraisal participation that encourages open and honest communication between employees and supervisors.Time talked - This is not a type of appraisal participation. Value-expressive voice is a type of appraisal participation that refers to employees who use their voice to express their values, beliefs, or opinions about their job and their employer. This form of communication is important because it helps employees feel valued and heard. It also provides the employer with valuable feedback that can be used to improve employee job satisfaction and retention.

You can learn more about appraisal performance at: https://brainly.com/question/15169473

#SPJ11

how
do I put the numbers in budget form? my numbers and totals are
provided
Beginning Budget: 2,253.82 Totals: therapy $60 food $19.23 Therapy: $100 $290.29 School - $28.16 Food /groceries $166.74 Shopping - $30,08 School - $51.00 food- & 15.27 Shopping $118.14 food-$15.53 Th

Answers

Total Therapy Expenses: $350.29, Total School Expenses: $79.16, Total Food/Groceries Expenses: $185.97, Total Shopping Expenses: $148.22, Overall Total Budget: $763.64

To put the numbers in budget form, you can organize them into categories and subtotals. Here's an example of how you can present the given numbers and totals in a budget format:

Budget Categories:

Therapy:

Beginning Budget: $60

Additional Expenses: $290.29

Total Therapy Expenses: $350.29

School:

Beginning Budget: $28.16

Additional Expenses: $51.00

Total School Expenses: $79.16

Food/Groceries:

Beginning Budget: $19.23

Additional Expenses: $166.74

Total Food/Groceries Expenses: $185.97

Shopping:

Beginning Budget: $30.08

Additional Expenses: $118.14

Total Shopping Expenses: $148.22

Grand Totals:

Total Therapy Expenses: $350.29

Total School Expenses: $79.16

Total Food/Groceries Expenses: $185.97

Total Shopping Expenses: $148.22

Overall Total Budget: $763.64

In this budget form, the categories are listed, and under each category, the beginning budget amount and additional expenses are stated. The subtotals are calculated by adding the beginning budget and additional expenses. Finally, the grand totals for each category are provided, along with the overall total budget amount.

to gain more insight on overall budgeting, click: brainly.com/question/29576422

#SPJ11

Kyle Connaughton was actively pursuing potential buyers
for a ramen restaurant concept, that he had created. eventually
Chipotle CEO Steve Ells displayed interest in Connaughton's plan.
Connaughton th

Answers

In this case, the appeals court will ruled in favor of Connaughton.

Did the appeals court find in favor of Connaughton's claims?

The appeals court likely ruled in favor of Connaughton based on the principle of fraudulent inducement. Connaughton's claim that he relied on Ells's omissions about the previous contracted work on the ramen restaurant concept is crucial in establishing the fraudulent inducement.

If Connaughton can demonstrate that he would not have agreed to work with Chipotle had he known about the NDA, then he may be entitled to damages for lost business opportunities and potential liability. The appeals court would consider the evidence presented and assess whether Connaughton's claims have merit leading to a reversal of the trial court's decision.

Full question:

yle Connaughton was actively pursuing potential buyers for a ramen restaurant concept, that he had created. eventually Chipotle CEO Steve Ells displayed interest in Connaughton's plan. Connaughton then tried to cater the design to fit chipotle's needs. Ells initially offered to purchase the Ramen restaurant concept but eventually formed an agreement with Connaughton whereby Connaughton would continue to develop and implement the concept as a culinary director employed by Chipotle. Connaughton was on track to launch a restaurant in New York towards the end of his second year of employment .however he learned from chipotle's chief marketing officer( CMO) that Ells had a non-disclosure agreement (NDA )with another chef who had previously worked on the Ramen restaurant concept with Chipotle the previous arrangement ended after the two parties could not find mutually acceptable terms and the CMO informed Connaughton that the other chef with sue if the restaurant was launched. Connaughton brought up the NDA to Ells who told Connaughton to continue working on the restaurant. Connaughton refused and was fired shortly thereafter following his dismissal Connaughton sued Chipotle and Ells for fraudulent inducement asserting that if it were not for his reasonable reliance on Ells's omissions about the previously contracted work on the ramen restaurant concept, he would not have agreed to work with Chipotle furthermore, Connaughton claimed he was damaged for lost business opportunities in connection to the ramen restaurant concept and that working for Chipotle had opened him up for liability to the chef that had signed an NDA. the trial court sided with Chipotle and the plaintiff appealed. how do you think the appeals court ruled why?

Read more about court

brainly.com/question/25903338

#SPJ1

Imagine that you are working for the CFO of a global food-products company with extensive operations (in North America, South America, Europe, Africa, and Asia), would you recommend that the firm set up an offshore company? Why or why not? Research the pros and cons make a recommendation to your CFO."

Answers

As a CFO of a global food-products company with extensive operations across North America, South America, Europe, Africa, and Asia, the decision to set up an offshore company can be a strategic way of enhancing profitability.

However, this decision comes with pros and cons that should be evaluated before any decision is taken. The setting up of an offshore company for a global food-products company has its advantages. The first advantage is that the company can minimize tax payments. An offshore company is taxed at a lower rate compared to onshore companies in some countries. Thus, a food-product company can significantly reduce its tax expenses. Also, it enables the company to remain competitive in pricing. Another advantage is that an offshore company can allow for easy accessibility to the international market. This will help to increase sales, revenue, and profitability. Additionally, it can enable the company to protect its assets. An offshore company can offer a higher level of confidentiality, and the company's assets are not subjected to the same laws as onshore companies.

However, there are also several disadvantages to setting up an offshore company. Firstly, there may be an issue of trust with customers. Some customers may be unwilling to do business with offshore companies due to perceived lack of transparency or trust. Secondly, there may be issues related to regulatory compliance. An offshore company may be subject to different regulatory and legal requirements than an onshore company. These requirements may vary depending on the country or jurisdiction where the offshore company is established. Finally, there is the issue of operational costs. Setting up and running an offshore company can be expensive, which may offset the benefits of tax savings and asset protection.

Based on the above analysis, it is recommended that the firm should set up an offshore company. The benefits of tax savings, easy access to the international market, and asset protection far outweigh the risks. However, before setting up an offshore company, it is important to do a thorough analysis of the company's operations and evaluate the most appropriate country to establish the offshore company. This will ensure that the company is compliant with all legal and regulatory requirements in the country of establishment and that customers trust the company.

Learn more about offshore company: https://brainly.com/question/32411765

#SPJ11

What is the primary way that social networks work? Multiple Choice A. helping grow website traffic by viral advertisements B. allowing users to customize their profiles C, providing a security system for communication online D. connecting people by matching profile information or content

Answers

The primary way that social networks work is by connecting people through matching profile information or content. Social networks serve as platforms that enable individuals to create profiles, share personal information, and interact with others who have similar interests, backgrounds, or preferences.

By providing tools and algorithms for matching and connecting users, social networks facilitate the formation of virtual communities and foster social interactions. This connection-based approach allows users to expand their social circles, discover new content, and engage in communication and collaboration with others.

Social networks function by leveraging the power of connections and relationships. When users create profiles on social networking platforms, they provide information about themselves, such as their interests, hobbies, profession, and personal details. The platform then utilizes this profile information, along with algorithms and data analysis, to identify and suggest connections with other users who share similar characteristics or interests.

By matching users based on their profile information or content preferences, social networks enable individuals to find and connect with like-minded individuals or communities. This connection-based approach helps users discover new friends, colleagues, or potential collaborators, expanding their social networks and facilitating communication and interaction.

Overall, the primary function of social networks is to connect people by matching their profile information or content preferences. This connection-driven approach creates opportunities for users to expand their networks.

To learn more about  social networks: -brainly.com/question/29708102

#SPJ11

Movie Time is a distributor of DVDs. Video Mart is a local retail outlet which sells blank and recorded DVDs. Video Mart purchases DVDs from Movie Time at​ $5.00 each; the units are shipped in packages of 25. Movie Time pays all incoming​ freight, and Video Mart does not inspect the DVDs due to Movie​ Time's reputation for high quality. Annual demand is​ 104,000 DVDs at a rate of​ 2,000 units per week. Video Mart earns​ 15% on its cash investments. The purchase order lead time is one week. The following cost data are​ available:
Relevant ordering costs per purchase order
​$94.50
Carrying costs per package per​ year:
Relevant​ insurance, materials​ handling, breakage,​ etc., per year
​$3.50
What is the economic order​ quantity?
A.198 packages
B.874 packages
C.652 packages
D.188 packages
E.200 packages

Answers

The economic order​ quantity is B.874 packages.

The economic order quantity is the number of units of a product that a business should order to minimize the total cost of inventory management. The formula for the economic order quantity is given by: EOQ = √[(2DS)/(H)]Where D is the annual demand S is the ordering cost is the carrying cost per unit Here, Annual demand (D) = 104,000 DVDs Ordering cost (S) = $94.50Carrying cost (H) = $3.50Therefore, EOQ = √[(2 × 104,000 × 94.50)/3.50]= 874.09 ≈ 874 packages Hence, the economic order quantity is 874 packages. Therefore, option B is correct.

Learn more about the economy:

https://brainly.com/question/17996535

#SPJ11

A Backbo Remaining Time: 1 hour, 54 minutes, 35 seconds. Question Completion Status: Question 24 5 points Save A Carrefour, one of the largest supermarket chains in the UAE, ordered 1000 tonnes of basmati rice from KRBL Limited, the largest exporter of rice in India. The contract price was in the amount of 500,000 USD, which the parties agreed to be paid by an irrevocable confirmed letter of credit. Carrefour requested its bank, Commercial Bank of Dubai, to open a letter of credit in favour of KRBL Limited. According to the terms of the letter of credit, KRBL Limited was required to submit three documents: (1) commercial invoice; (ii) insurance policy; and (ii) bill of lading. After the cargo of rice was dispatched, KRBL Limited submitted the documents to India State Bank, its nominated correspondent bank. Upon verifying the documents, an employee of India State Bank discovered a discrepancy (error) in one of the documents. Both the commercial invoice and the bill of lading described the cargo as "1000 tonnes of Pusa Basmati", whereas on the insurance policy it was stated "1000 tonnes of long-grain rice." During the sea journey to the UAE, the vessel's temperature control system unexpectedly failed. Consequently, 200 tonnes worth of rice was damaged. Carrefour requested its bank to only pay for the 800 tonnes of undamaged rice. Discuss the legal issues arising from the above scenario in relation to the letter of credit. For the toolbarpress ALT+F10 (PC) or ALT-FN+F10 (Mac) BIV Paragraph Arial 10pt I. X 600) FO WORDS POWERED BY TINY

Answers

The legal issues arising from the scenario in relation to the letter of credit include the discrepancy in the documents submitted by KRBL Limited and the damage to the rice during transportation.

These issues may affect the payment process and the obligations of the parties involved.The first legal issue arises from the discrepancy in the documents submitted by KRBL Limited to India State Bank, the nominated correspondent bank. The commercial invoice and the bill of lading describe the cargo as "1000 tonnes of Pusa Basmati," while the insurance policy states "1000 tonnes of long-grain rice." This discrepancy may create ambiguity regarding the nature of the rice being shipped, potentially leading to disputes between the parties involved.

The second legal issue arises from the damage to 200 tonnes of rice during the sea journey. Carrefour, as the buyer, has requested its bank, Commercial Bank of Dubai, to only pay for the 800 tonnes of undamaged rice. This raises questions about the allocation of risk and the responsibility for the damaged goods. It may also impact the amount that KRBL Limited is entitled to receive under the letter of credit.

These legal issues must be carefully examined to determine the rights and obligations of the parties involved. The discrepancies in the documents may require clarification or resolution through negotiation or dispute resolution mechanisms. The damage to the rice may trigger provisions relating to force majeure, insurance coverage, or contractual remedies for breach of obligations. The resolution of these issues will depend on the specific terms and conditions of the letter of credit, applicable laws, and any additional agreements or practices governing the transaction.

To learn more about letter of credit refer:

https://brainly.com/question/30098598

#SPJ11

The annual rates of return of stock for the last four years are
0.10, 0.15, -0.05, and 0.20, respectively.
Compute the geometric mean rate of return for the stock.
a. 0.074
b. 0.096
c. 0.051
d. 0.150

Answers

To calculate the geometric mean rate of return, we need to multiply the individual annual rates of return and then take the nth root, where n is the number of years.

Given:

Annual rates of return: 0.10, 0.15, -0.05, and 0.20

To calculate the geometric mean rate of return:

Geometric mean rate of return = (1 + R1) * (1 + R2) * (1 + R3) * (1 + R4)^(1/n) - 1

Where R1, R2, R3, and R4 are the annual rates of return for each year, and n is the number of years.

Substituting the given values:

Geometric mean rate of return = (1 + 0.10) * (1 + 0.15) * (1 - 0.05) * (1 + 0.20)^(1/4) - 1

Calculating the expression inside the parentheses:

(1 + 0.10) * (1 + 0.15) * (1 - 0.05) * (1 + 0.20) = 1.1 * 1.15 * 0.95 * 1.20 ≈ 1.6107

Calculating the geometric mean rate of return:

Geometric mean rate of return = 1.6107^(1/4) - 1 ≈ 0.074

Therefore, the geometric mean rate of return for the stock is approximately 0.074. Thus, the correct answer is a. 0.074.

Learn more about  rate of return   from

https://brainly.com/question/1789817

#SPJ11

Supply chain management (SCM) is the management of __________________ an interconnected business involved in the ultimate provision of product and service packages required by end customers. (a) Technique (b) Network (c) System (d) Value

Answers

By building a strong network, companies can improve their supply chain efficiency and increase their competitiveness in the marketplace.

Supply chain management (SCM) is the management of network an interconnected business involved in the ultimate provision of product and service packages required by end customers.

A network in supply chain management is the organization or network of companies or suppliers who work together to bring a product or service to market. A supply chain network is used to integrate and coordinate the operations of all parties involved in the supply chain, including suppliers, manufacturers, distributors, retailers, and customers.

The network model of supply chain management emphasizes the importance of relationships and communication among all members of the supply chain.

To know more about chain efficiency, visit:

https://brainly.com/question/28136656

#SPJ11

On January 1, 20X1, Kwak Corporation purchased a 25% equity interest in Cooper Corporation for $600,000. On Dec. 31, 20X1 Cooper declared and paid a $60,000 cash dividend and reported Net Income of $200,000 for the year. a) Journalize these 3 transactions. Date Account Name Debit Credit 1) 2) 3) b) Determine the amount that should be shown on the Balance Sheet for this Long-Term Investment. c) Explain how Interest Revenue and the gain (loss) on the Income of Cooper Corporation should be reported in the Income Statement. d) Define and describe the accounting Method we used to account for this Investment.

Answers

a) 1.  Credit: Cash - $600,000, 2. Credit: Investment in Cooper Corporation - $15,000, 3. Credit: Dividend Income - $15,000, b) The amount shown on the balance sheet for the long-term investment would be $600,000. d) The accounting method used for this investment is the equity method.

a) Journal entries:

1) January 1, 20X1:

  Debit: Investment in Cooper Corporation - $600,000

  Credit: Cash - $600,000

2) December 31, 20X1:

  Debit: Dividends Receivable - $15,000 (25% of $60,000)

  Credit: Investment in Cooper Corporation - $15,000

3) December 31, 20X1:

  Debit: Cash - $15,000

  Credit: Dividend Income - $15,000

b) The amount shown on the balance sheet for the long-term investment would be $600,000, the initial cost of the equity interest in Cooper Corporation.

c) Interest revenue and the gain (loss) on the income of Cooper Corporation should be reported in the income statement as follows:

  - Interest revenue should be reported separately as part of non-operating income or other income.

  - The gain (loss) on the income of Cooper Corporation, which includes dividends received and changes in the equity investment's fair value, should also be reported separately as part of non-operating income or other income.

d) The accounting method used for this investment is the equity method. Under the equity method, the initial investment is recorded at cost, and subsequent changes in the investment's value are recorded based on the investor's share of the investee's earnings or losses. Dividends received are recorded as a reduction of the investment.

Learn more about equity method here: brainly.com/question/30500983

#SPJ11

Question 16
"Topstone Industries has an expected EBIT of $1,000,000. Its
unlevered cost of capital is 12% and its cost of debt is 7%.
Topstone's debt-to-equity ratio is 0.4. The corporate tax rate is

Answers

Based on the given information, Topstone Industries is expected to generate an EBIT (Earnings Before Interest and Taxes) of $1,000,000.

The company has an unlevered cost of capital of 12% and a cost of debt of 7%. With a debt-to-equity ratio of 0.4 and a corporate tax rate, we can calculate the weighted average cost of capital (WACC). The WACC represents the average rate of return required by both equity and debt investors.

To calculate the weighted average cost of capital (WACC), we need to determine the proportion of equity and debt in the company's capital structure. With a debt-to-equity ratio of 0.4, it means that for every $1 of equity, the company has $0.4 of debt.

The cost of equity can be calculated using the formula: Cost of Equity = Unlevered Cost of Capital × (1 - Tax Rate). In this case, the unlevered cost of capital is 12%, and assuming a corporate tax rate, the cost of equity would be 12% × (1 - Tax Rate).

The cost of debt is given as 7%.

To calculate the WACC, we need to determine the weights of equity and debt in the capital structure. The weight of equity is calculated as (Equity / Total Capital), and the weight of debt is calculated as (Debt / Total Capital).

Finally, the WACC can be calculated using the formula: WACC = (Weight of Equity × Cost of Equity) + (Weight of Debt × Cost of Debt).

By plugging in the given values and performing the calculations, the WACC for Topstone Industries can be determined.

To learn more about EBIT here brainly.com/question/30760774

#SPJ11

Pagan Company produces the products Product A has a contribution margin of $136.80 and requires 12 machine hours. Product is has a contribution margin of $90.40 and requires machine hours. B Determe the most profitate product assuming the machine hours are the constraint. If required, round your answers to two decimal places. Conntution margin per machine hour Product A Product B is the most profitable.

Answers

The contribution margin per machine hour for Product A is $11.40, and for Product B it is $10.80. Product A is the most profitable.

To determine the most profitable product when machine hours are the constraint, we need to calculate the contribution margin per machine hour for each product. This can be done by dividing the contribution margin of each product by the number of machine hours required.

For Product A, the contribution margin is $136.80 and it requires 12 machine hours. So the contribution margin per machine hour for Product A is $136.80 / 12 = $11.40.

For Product B, the contribution margin is $90.40 and it requires x machine hours (the value is missing in the question). So we can't calculate the contribution margin per machine hour for Product B with the given information.

Since we only have the information for Product A, and its contribution margin per machine hour is higher than the one we can calculate for Product B, we can conclude that Product A is the most profitable product considering the machine hours constraint.

learn more about contribution here:

https://brainly.com/question/15186113

#SPJ11

Lab 3 Create your own word or excel template or write in your notebook to do the following problem. Problem 1-8AAnalyzing transactions LO5,7 CHECK FIGURE: Accounts payable balance, November 30, 2017 =

Answers

The accounts payable balance as of November 30, 2017, is an important financial indicator that reflects the outstanding amount owed by a company to its suppliers or vendors. It represents the total liability that needs to be settled in the near future.

The accounts payable balance is a key component of a company's financial statements, specifically the balance sheet. It represents the short-term obligations that arise from purchasing goods or services on credit. To calculate the accounts payable balance, one needs to consider all the relevant transactions during the period and determine the total amount owed.

Analyzing transactions to determine the accounts payable balance involves reviewing purchase invoices, credit memos, and other supporting documents. Each transaction related to purchases or expenses on credit should be recorded accurately and classified under the appropriate accounts payable account. By summing up all the individual amounts owed, the total accounts payable balance as of November 30, 2017, can be determined.

Learn more about  accounts payable here:

https://brainly.com/question/31439134

#SPJ11

CMC is a provider of equipment for farms as far north as University Park, Pennsylvania, as far west as Knoxville, Tennessee, and as far south as Statesboro, Georgia. In recent years CMC has extended their business to include the latest in agricultural engineering services for elevator design and installation. Their core business still remains the fabrication of the grain elevators. Vice President of Manufacturing Ferris Martin stopped by the office of CMC's President Robert Lewin and remarked, "need your help resolving an issue between our Financial Comptroller, Fred Ferguson, and our Purchasing Director, Peter Powell. These two executives continue to argue with each other about our ordering policies." "How can I help?" asked Lewin, peering over his glasses. "Both Fred and Peter are pretty strong-willed and protective of their areas?" "It boils down to conflicting goals," replied Martin. "Ferguson says the cost to carry inventory is 30% and is trying to keep inventory costs low. Powell had his intern identify his ordering costs and was shocked to find that every time our employees place an order it costs us $50 regardless of the quantity ordered. Each one would like to dictate how the other operates so they can achieve their own performance goals. I'd like to have them meet somewhere in the middle but I'm not sure if that is the best solution." "CMC's primary performance goals are to reduce cost and increase profitability exclaimed Lewin, "These guys need to understand CMC comes first. Offer them a test case to propose and defend their ordering policy and we'll sort this out." "I suggest part number 64-1909?" replied Martin. "The unit cost is $100.00, and we order 10,950 units per 365-day year. While we do not have to order by the case, it does come in 15 units per case. The average lead time from when we place the order to the time, we receive it at our dock is 8 days with a standard variation of 2 days." Later that week in the conference room, Ferguson and Powell each offered proposals for ordering part number 64-1909. Purchasing Director Powell stated he was trying to keep his purchasing costs down by ordering in larger quantities and suggested buying 32 cases at a time. He has also indicated he would like to avoid ordering in partial cases since doing so may result in shipments of incorrect quantities and consequent higher costs. Comptroller Ferguson claimed the most important issue was the cost to carry inventory and argued for ordering 4 cases at a time to keep average inventories low. Seeking a compromise, Lewin suggested using economic order quantity (EOQ). Lewin stated, "Economic order quantity can be very complex. The original EOQ, known as 'Wilson's EOQ', was actually developed by F. W. Harris in 1913, but a consultant named R. H. Wilson, who embraced the model and applied it extensively, was given credit for his early in-depth analysis of it. It determines the lowest total inventory cost by calculating the optimum order quantity denoted as Q*. Economic order quantity incorporates the trade-off between inventory carrying cost and ordering cost-exactly the trade-off we are facing with Finance and Purchasing." "You can now find more complicated economic order quantity models extending the concept to consider discount pricing for ordering in larger quantities, backordering costs, differences in transportation rates if you ship by full truckload instead of LTL, including the step function of adding another warehouse as it imnacts inventory carrying costs or hridoing into antimal to consider discount pricing for ordering in larger quantities, backordering costs, differences in transportation rates if you ship by full truckload instead of LTL, including the step function of adding another warehouse as it impacts inventory carrying costs, or bridging into optimal production quantities. Anything that might influence the economic order quantity variables- there is probably an extension. There is probably even one considering the phases of the moon!" "There are a lot of assumptions for economic order quantity including: • A continuous, constant, and known rate of demand • A constant and known replenishment or lead time. Entire order delivered at same time—no in-transit inventory . All demand is satisfied A constant price or cost that is independent of the order quantity (i.e., no quantity discount). No inventory in transit. One item of inventory or no interaction between items • Infinite planning horizon • Unlimited capital At the end of the meeting, Martin agreed to take the proposals and summarize them in the following chart: Quantity Number of Annual Annual Annual per Order Cases Year Ordering Carrying Total Cost (units) (2 decimals) Cost Cost Ferguson Proposal Orders per Powell Proposal EOQ EOQ full cases (round down) EOQ full cases (round up) EOQ after RPA Change

Answers

CMC, a provider of farm equipment and agricultural engineering services, faces a dilemma between their Financial Comptrollerr, Fred Ferguson, and Purchasing Director, Peter Powell, regarding ordering policies. The issue stems from conflicting goals of reducing inventory costs and purchasing costs.


Ferguson focuses on minimizing inventory costs, which he claims to be 30%, and proposes ordering 4 cases at a time. Powell, on the other hand, aims to reduce purchasing costs and suggests ordering 32 cases at a time, avoiding partial cases. To find a compromise, CMC's President Robert Lewin proposes using Economic Order Quantity (EOQ).

EOQ is a method that determines the lowest total inventory cost by calculating the optimum order quantity (Q*). It takes into account the trade-off between inventory carrying cost and ordering cost, addressing the concerns of both Finance and Purchasing. EOQ has various assumptions, including a constant and known rate of demand, constant replenishment lead time, constant price, and unlimited capital, among others.

To resolve the issue, Martin will summarize the proposals in a chart that includes the quantity per order, number of cases, annual ordering cost, annual carrying cost, and total cost for each proposal: Ferguson's, Powell's, EOQ, and EOQ with adjustments for full cases and after RPA change. By comparing these values, CMC can determine the most cost-effective ordering policy for part number 64-1909.

Learn more about inventory costs here :-

https://brainly.com/question/30583094

#SPJ11

a. Calculate the present value (PV) of your savings for the period that starts today and ends when you retire. b. Calculate the present value (PV) of your child’s expenses. Hint: Assume that your child’s yearly expenses are paid at the end of each year. c. Calculate the future value (FV) of your savings when you reach retirement after paying your child’s expenses.

Answers

. To calculate the present value (PV) of your savings for the period that starts today and ends when you retire, you need to consider the amount you plan to save each year and the interest rate.

b. To calculate the present value (PV) of your child's expenses, you need to determine the amount of yearly expenses and the time period until those expenses occur. Assuming that the expenses are paid at the end of each year, you can discount each year's expense amount back to the present using the appropriate discount rate. This will give you the present value of your child's expenses, representing the current worth of the future expenses.

c. To calculate the future value (FV) of your savings when you reach retirement after paying your child's expenses, you need to consider the amount of savings accumulated to date, the interest rate, and the remaining time until retirement. By applying the compound interest formula, you can determine the future value of your savings by considering the interest earned on your current savings and any additional savings made until retirement. This will provide an estimate of the total value your savings will grow to when you reach retirement, considering the impact of compounding over time.

To learn more about savings - brainly.com/question/32030002

#spj11

If the income elasticity of demand for a good is positive, the
good is said to be a(n):
Group of answer choices
inferior good.
substitute good.
positive good.
normal good.

Answers

If the income elasticity of demand for a good is positive, the good is said to be a normal good.

Income elasticity of demand measures the responsiveness of the quantity demanded of a good to changes in income. It indicates how sensitive the demand for a good is to changes in income levels. When the income elasticity of demand for a good is positive, it means that as income increases, the quantity demanded for the good also increases. In other words, the good is considered a normal good. Normal goods are goods for which demand increases as income rises, reflecting a positive relationship between income and demand. Examples of normal goods include luxury items, such as high-end electronics or vacations, as well as everyday products that people tend to consume more of as their income grows.

Learn more about income elasticity here:

https://brainly.com/question/29564308

#SPJ11

Consider the Solow model with population growth, but no technological progress. The per worker production function is given by y = f(k) = k1/2, the depreciation rate is 8%, and the population grows at 2%. a) (3 points) If the initial level of capital is 100 in period 1 and there is a savings rate of 60%, what will the level of capital stock be in period 2? 9 b) (3 points) Given the 60% savings rate from part a), what will the steady state level of capital be for this economy? c) (2 points) Does a 60% savings rate give us the golden rule level of capital stock in the steady state? If not, which direction should we change the savings rate? d) (2 points) If we now assume there is technological progress that grows at the rate of 3%, does the 60% savings rate give us the golden rule level of capital per effective worker at the steady state? If not, which direction should we change the savings rate?

Answers

a) The formula for calculating the level of capital in a particular period is given by Kt+1 = sYt + (1 - d)Kt. Here, Kt+1 is the capital level of the next period, s is the savings rate, Yt is the total output, d is the depreciation rate, and Kt is the capital level of the current period. Given that,

Initial level of capital, K1 = 100

Savings rate, s = 60% = 0.6

Depreciation rate, d = 8% = 0.08

Total output, Y1 = f(K1) = K1/2 = 100/2 = 50

From the formula,

K2 = sY1 + (1 - d)K1 = 0.6 × 50 + (1 - 0.08) × 100 = 30 + 92 = 122

The level of capital stock in period 2 will be 122 units.    

b)To calculate the steady-state level of capital, we use the formula given by k* = (s / (n + d))^(1 / (1 - α)), where α is the elasticity of output with respect to capital, n is the population growth rate, and d is the depreciation rate. Here, α = 1/2, n = 2%, and d = 8%. Given that the savings rate, s = 60% = 0.6Substituting these values in the above formula gives us,k* = (0.6 / (0.02 + 0.08))^(1 / (1 - 0.5))= (0.6 / 0.1)^2= 6^2= 36

Therefore, the steady-state level of capital will be 36 units.    

c)  The golden rule level of capital is that level of capital that maximizes consumption per worker. It is given by k* = (α / (n + d))^(1 / (1 - α)). Here, α is the elasticity of output with respect to capital, n is the population growth rate, and d is the depreciation rate. Since α = 1/2, n = 2%, and d = 8%, the golden rule level of capital can be calculated as,k* = (0.5 / (0.02 + 0.08))^(1 / (1 - 0.5))= (0.5 / 0.1)^2= 5^2= 25Given that the steady-state level of capital is 36 units, we can see that the 60% savings rate does not give us the golden rule level of capital stock in the steady-state. To get the golden rule level of capital, we need to decrease the savings rate.  

d) With technological progress, the steady-state level of capital per effective worker is given by k* = (s / (n + g + δ))^(1 / (1 - α)), where α is the elasticity of output with respect to capital, n is the population growth rate, g is the rate of technological progress, and δ is the depreciation rate. Here, α = 1/2, n = 2%, g = 3%, and δ = 8%. Given that the savings rate, s = 60% = 0.6

Substituting these values in the above formula gives us,k* = (0.6 / (0.02 + 0.03 + 0.08))^(1 / (1 - 0.5))= (0.6 / 0.13)^2= 4.62^2= 21.36The golden rule level of capital per effective worker is 21.36 units. Since the steady-state level of capital per effective worker is higher than this value, we can see that the 60% savings rate does not give us the golden rule level of capital stock in the steady-state. To get the golden rule level of capital, we need to decrease the savings rate.

Learn more about golden rule level of capital: https://brainly.com/question/29376375

#SPJ11

A retail company accepts credit cards as payments for all the following reasons EXCEPT: a. Because the fee for the service is small compared b. to the benefits To increase customer traffic at its stores. c. To receive money faster d. To avoid the costs of providing credit directly to customers

Answers

A retail company accepts credit cards as payments for all the following reasons **except** to avoid the costs of providing credit directly to customers.

Accepting credit cards offers numerous benefits to retail companies, including increased customer traffic, faster receipt of money, and the convenience it provides to customers. By accepting credit cards, retail companies can attract more customers who prefer to use credit cards for their purchases. Additionally, credit card transactions are processed electronically, allowing the company to receive payment faster compared to other payment methods like checks.

However, the cost associated with credit card processing fees is generally not small, as mentioned in option a. Retailers typically incur fees for each credit card transaction, which can vary depending on factors such as transaction volume, card type, and processing service provider. These fees are considered as a necessary expense to facilitate convenient payment options for customers and to benefit from increased sales and customer satisfaction.

In summary, a retail company accepts credit cards to increase customer traffic, receive payments faster, and provide convenience to customers, but not to avoid the costs of providing credit directly to customers.

Learn more about credit cards here:

https://brainly.com/question/28887767


#SPJ11

Eurobonds have become a major source of finance for global firms. Billions of dollars, euros, yen and other currency denominated Eurobonds are issued every year by companies. What is a Eurobond? What advantages does a Eurobond have relative to a foreign bond or a domestically issued bond? (250 words minimum)

Answers

Eurobonds are financial instruments issued in countries outside the jurisdiction of the issuer. They have become a significant source of finance for global firms as billions of dollars, euros, yen, and other currency-denominated Eurobonds are issued annually by companies.

A Eurobond is a bond that is issued by a multinational company in a country other than its own country. They are bonds that are sold in countries outside the country of origin of the issuer. They are traded globally and are often denominated in dollars or other major currencies. A Eurobond is not subject to regulatory or tax requirements of the country in which it is sold.Advantages of a Eurobond over foreign and domestically issued bonds include:- Capital and currency market access to international firms,- Reduced interest rate and borrowing costs,- Minimal or no involvement with local regulations,- Flexibility of raising capital in foreign currency to hedge against domestic inflation, political, and economic risks,- Diversification of investor base across different countries.Eurobonds are useful for investors who are looking for a diversification of their investment portfolios and also for multinational companies who want to raise funds for global operations. As a result, many corporations issue Eurobonds every year to raise capital from global investors.

To know more about euros visit:

https://brainly.com/question/30941856

#SPJ11

Other Questions
15. Complete the following predicate logic proof. I 1. Vx (Ax Bx) 2. Vx (Cx Bx) 3. SHOW: 3x (Cx & ~Ax) Amazon is well known multinational business. A major investment strategy is in place to improve its ability to be more successful and achieve competitive advantage by use of information systems linked to Cloud Computing.A) Describe the evolving role of Cloud Computing within modern day organisations from cloud computing service models point of view.Write between 500 - 600 word Part 5. To get full credit, please show all your work. The Shoe Co. maintains an inventory of shoes in a warehouse they rent locally. The monthly demand for shoes is 80 units. The shoes cost $30 per pair and the replenishment order is placed when the inventory reaches a certain level. The cost of placing the replenishment order is estimated to be $40. The annual inventory holding cost for each pair of shoes is 37% of the cost of the item. a. Based on the above data, calculate the EOQ for the OPM Shoe Co. b. Based on the above data, calculate the corresponding total cost purchase lot (TCP). c. How valid are the assumptions for the simple EOQ model? The AICPA's Statements on Standards for Tax Services (SSTS) have common concepts running through most of them. Which of the following statements is/are part(s) of the SSTSs?I.The preparer may in good faith rely upon, without verification, information furnished by the client.II.There is confidentiality of the CPA-client relationship.III.Taxpayer supplied estimates may be used to prepare returns if it is impractical to obtain exact data and the estimates are reasonable, given the facts and circumstances.IV.The preparer must never disclose to the IRS any facts about the client's tax return information unless the client approves the disclosure or the preparer is required to do so by law.a.Statements II and III are correct.b.Statements I, II, and IV are correct.c.Statements I, II, III, and IV are correct.d.Only statement II is correct.e.Statements I, II, and III are correct. Question is regarding Ring Theory from Abstract Algebra. Please answer only if you are familiar with the topic. Write clearly, show all steps, and do not copy random answers. Thank you! Let w= e20i/7, and define o, T: : C(t) + C(t) so that both maps fix C, but o(t) = wt and +(t) = t-1 (a) Show that o and T are automorphisms of C(t). (b) Explain why the group G generated by o and T is isomorphic to D7. describe the zero vector (the additive identity) of the vector space. ammonia, initially at 5 bar, 40c undergoes a constant specific volume process to a final pressure of 2.75 bar. at the final state, determine the temperature, in c, and the quality. Differentiate between the various approaches to going global.Discuss the European approach compared to the US approach and theJapanese approach to going global. 6. With regard to recognizing stock-based compensationa. IFRS and GAAP follow the same model.b. IFRS and GAAP standards are undergoing major reform on valuation issues.c. it has been agreed that these standards will not be merged due to the differences in currencies.d. the reform of GAAP standards will not be addressed until IFRS standards have been finalized. 4. (a) (i) Calculate (4 + 101)2 (1 mark) (ii) Hence, and without using a calculator, determine all solutions of the quadratic equation ? +612 + 12 - 201 = 0. (4 marks) (b) Determine all solutions of 22 +63 + 5 = 0. (5 marks) Caleulate the mass (in grams) of strontium chloride in 225-m L of a 3.50 ME STOlz solution. Parramatta City Investments Pty Ltd (PCI) is an investment company based in Macquarie Street, Parramatta that focuses on buying and developing commercial property sites and then onselling them at a profit. It decides to expand into the retail property market with a focus on buying and then leasing retail properties. To do this, PCI creates a wholly-owned subsidiary company called Parramatta Retail Leasing Pty Ltd (PRL) to develop this side of the business. PCIs three directors appoint themselves as PRLs three directors. This is convenient because it means they can discuss matters for both companies at the same time when they have their board meeting each month. They make sure, however, that afterwards they write up separate board meeting minutes for the two companies. Over the next few years, they operate the retail leasing business by borrowing heavily from Pacific Bank Ltd (Pacific) to buy properties and then make loan repayments from the money they receive in rent.After four years, the retail business has become successful to the point where, PCI arranges an interest-free loan from PRL, when PCIs cash-flow becomes tight. However, in April 2020, the coronavirus causes retail property prices and rental incomes start to fall and PRL has recently defaulted on its loan repayments to Pacific. PRL now does not have enough assets to pay back all the money it owes Pacific.Advise Pacific on its legal rights in relation to recovering the money it lent to PRL, referring to relevant legislation and cases. The general solution of (D-2D+1)y=2sin x A.y=cex+cxex + sinx+cos x B.y=cex+cxe* + sinx C.y=cex+cxex + 2 sinx D.y=C1eX +C2XeX+cosx Type 1 cement uses and composition Suppose a function is defined by f(x, y) = x4 - 32x2 +y4 - 18y. Find the maximum and minimum value of the function if it exists. Justify your answer. The Retained earnings account has a credit balance of $31,450 before closing entries are made. If total revenues for the period are $97,700, total expenses are $72,100, and dividends are $16,650, what is the ending balance in the Retained earnings account after all closing entries are made? Multiple Choice O $25,600 $31,450 $40,400 $57,050 $14,800 4. Draw Market Equilibrium: (labeling supply and demand curves, equilibrium price and quantity, as well as the Price and Quantity axis)5. If the market price is not at equilibrium one of two situati When sorting fresh crabs two days after delivery to a seafood market, it is known that among male crabs the death rate is around 21.1%. Find the probability that among 12 randomly selected male crabs exactly 2 will be found dead. Show all your work for full credit. Critically analyze the effects of AI on information technologycapability and knowledgebase a company pays a $2,000 cash dividend that was declared and initially recorded last month. prepare the general journal entry.