Assume that Element Q has the following three isotopes: 2480, 252Q, and 259Q. If the atomic mass of Q is 258.63, which of its isotopes is most abundant?
Complete the following:
• Make a claim that answers the question
• Support your answer with evidence from the information given
• Explain your reasoning

Water is added to vinegar, which already contains acetic acid, to dilute it while keeping the same number of moles in the acid solution.

This makes it easy to determine the titration's end point, which helps ensure appropriate titration and accurate results.

Since the number of acid moles in the solution does not vary with the addition of water, the additional volume caused by the addition of water is not taken into account in the calculations.

To learn more about Titration, refer to:

https://brainly.com/question/24704707

#SPJ4

Due to the hydrogen bonding between the molecules of ethanol and water, it is True.

Water and ethanol form weak hydrogen bonds with aromatic hydrogen atoms and strong hydrogen bonds with the hydroxyl, carbonyl, and ether groups in chrysin/galangin. Although less frequently than in water, ethanol molecules can form hydrogen bonds with one another. The fact that there is only one hydrogen with a significant Positive charge in each ethanol molecule limits the hydrogen bonding. Between adjoining hydrogen and oxygen atoms of nearby water molecules, hydrogen bonds are formed. A bond called a hydrogen bond is produced by the attraction between individual water molecules.

Learn more about Hydrogen bonding here-

https://brainly.com/question/10904296

#SPJ4

The kinetic energy is 0.5177 × 10⁻²¹ J more at 50°C compared to 25°C.

The average kinetic energy of a molecule is directly proportional to the absolute temperature of a gas.

KE = ( 3/2 ) ( R / Nₐ ) T

Where T is the temperature of the molecule, R is the gas constant, and Nₐ is Avogadro's number.

Now, R = 8.314 J/mol.K

Avogadro's number, Nₐ = 6.022 × 10²³ atoms/ mol

The average kinetic energy at 50° C is:

T = 50° C = 323 K

KE₁ = ( 3/2 ) × ( R / Nₐ ) × T₁

KE₁ = ( 3 × 8.314 × 323 ) / ( 2 × 6.022 × 10²³ )

KE₁ = 668.90 × 10⁻²³ J

KE₁ = 6.6890 × 10⁻²¹ J

The average kinetic energy at 25°C is:

KE₂ = ( 3/2 ) × ( R / Nₐ ) × T₂

KE₂ = ( 3 × 8.314 × 298 ) / ( 2 × 6.022 × 10²³ )

KE₂ = 617.13 × 10⁻²³ J

KE₂ = 6.1713 × 10⁻²¹ J

Now,

The average kinetic energy of the molecules at 50° C compared to 25° C is:

KE = KE₁ - KE₂

KE = 6.6890 × 10⁻²¹ - 6.1713 × 10⁻²¹

KE = 0.5177 × 10⁻²¹ J

Hence, the average kinetic energy is 0.5177 × 10⁻²¹ J more at 50° C compared to 25° C.

Learn more about kinetic energy here:

https://brainly.com/question/8101588

#SPJ9

7g/mL

Density is a measure of mass per volume.

Density Formula

The density formula is  [tex]\displaystyle D=\frac{m}{V}[/tex] where m is the mass in grams (g) and V is the volume in milliliters (mL). The way I learned the formula was that the m over the V looks like a heart when written out.

We can plug the mass and volume we were given to solve for density.

[tex]\frac{14}{2}[/tex] equals 7. So, the density must be 7 grams per milliliter (g/mL).

Density Units

The units for density are important. You will not get the correct answer if you do not include your units. There are multiple ways to express density, but it is most common to have g/mL.

Additionally, density should always have the volume measurement in the denominator. This means that density will never be written in mL/g.

The equilibrium solubility of Ca (So3)2 is

Ca (So3)2 ⇋⇋ Ca2 + 2(SO3)

The Ksp (Solubility product) expression looks like this:

Ksp = [Ca2+] [SO3-]2

Ca (So3)2 generates 1 mol of Ca2+ whereas 2 mol of SO3– per mol.

[Ca2+] = 1.18*10^-4 M

[I–] = (2) × 1.18*10^-4 M

So, [I–] = 2.36 × 10^-4M

On Replacing these values in the Ksp equation.

Ksp = (1.18*10^-4M) (2.36 × 10^-4M)2

So, Ksp = 2.7848 x 10^-8 M2

To learn more about Solubility products, refer to:

https://brainly.com/question/1419865

#SPJ4

At 30°C, Molar enthalpy will be 72,446.4 J/mole and total enthalpy will be 26.5 kJ.

At 50°C, Molar enthalpy will be 3,63,792J/mole and total enthalpy will be 132.5 kJ.

The enthalpy value per mole is known as molecular enthalpy. Enthalpy is a thermodynamic quantity that, according to this definition, is equivalent to a system's entire heat capacity. It is equal to the sum of the system's internal energy and the volume times pressure product. KJ/mol serves as the unit of measurement for this value. As a result, we can arrive at the following equation to determine molar enthalpy:

DH/n = Molar Enthalpy n is the number of moles of reactant used in the system, and DH is the change in enthalpy of the system. For instance, the change in enthalpy when one mole of a chemical species is created in the standard state at a certain temperature is known as the molar enthalpy for the creation of a specific substance.

To learn more about Molar enthalpy from the given link:

https://brainly.com/question/25758173

#SPJ4

An acidic solution has a ph value of 0 - 6, a neutral solution has a ph value of 7, and a basic (alkaline) solution has a ph value of 8 - 14.

According to Arrhenius, an acid is a substance that releases hydroxonium ion (H3O+) as its only positive ion when dissolved in water. In other words, they are proton donors. They also turn litmus paper red, have a wet feeling and a sour taste.

A base is a substance that releases hydroxide ion (OH-) as its only negative ion when dissolved in water, according to Arrhenius. They are proton acceptors and turn litmus paper blue. They have a slippery feeling and a bitter taste.

To determine whether a solution is acidic or basic, ph indicators like litmus paper, phenolphthalein and methyl orange are used, but they do not give an exact ph value. To specifically know how acidic or basic a solution is, the ph scale is used. It comprises of a range of numbers from 0 - 14, with 0 being the most acidic and 14 being the most basic. Neutral substances like water have ph value of 7. Acidic solutions have a ph range from 0 - 6, while basic solutions have ph values from 8 - 14.

Learn more about the ph scale here

https://brainly.com/question/1433865

#SPJ4

Answer:video camera

Explanation:

Answer:

The flame of the candle looks to go out, but the candle continues to burn. In actuality, the copper wire coil is transferring heat away from the candle flame. The flame returns after the coil of wire is removed.

Explanation:

25% weight-to-weight acetic acid solution has a molar fraction of 4.375 M.

What is molar fraction?

The mole fraction is one of many ways to indicate the concentration of the solution. A mole fraction is a unit of concentration. The ratio of solute to solvent in a solution is measured using a unit called the mole fraction, which is symbolised by the letter "X."

X is a molar fraction representation. The mole fraction is defined as: moles of solute/total moles of solvent if the solution contains only components A and B. As a result, the mole fraction of each component added together is always equal to one.

The fact that the acetic acid is specified as 25% should be noted.

1.05 kg/L or 1.05 g/ml of solution density is equal to d.

Given the density, the molar fraction of a 25% weight-averaged acetic acid solution will be:

M = 25 × 1.05 × 10/60

= 4.375 M

Therefore, 4.375 M is the molar fraction of a 25% weight-to-weight acetic acid solution.

To learn more about molar fraction from the given link below,

https://brainly.com/question/9387281

#SPJ4

Answer:

Oxygen has more protons than hydrogen and water's shared electrons are drawn to it.

Explanation:

An barium, group 2A family atom has an atomic number of 56

Barium is a chemical element with the symbol Ba and atomic number 56 it is fifth element in group two and is a soft, silvery alkaline earth metal because of its high chemical reactivity, barium is never found in the nature as a free element, element symbol are Ba and when  If it has a charge of 1+ then barium has 56 electron then 56-1=55 electron are present barium are present in group 2A in the periodic table and called alkaline earth metal

Know more about element

https://brainly.com/question/28563164

#SPJ1

The number of neutrons present in the nucleus of an average atom in any given element is best estimated by subtracting the number of protons from the mass number.

All atoms contain protons, neutrons and electrons, although the amount differs for each atom. Neutrons are located in the nucleus of each atom. They were first discovered by James Chadwick. They are also neutral and have no charge.

Apart from neutrons, positively charged protons are present in the nucleus. The number of protons is equal to the atomic number, usually denoted with the letter Z.

The mass number or atomic mass is the total mass of the atom. It is calculated by adding the number of protons to the number of neutrons. Electrons are really light and have negligible mass (about 1/1840 times the mass of a proton), so we don't add their masses when calculating mass number. So, to get the number of neutrons in an atom, subtract the number of protons from the mass number.

Learn more about atoms here:

https://brainly.com/question/1379579

#SPJ4

Initial main byproducts of the reaction between concentrated hydro iodic acid and benzyl isopropyl ether are isopropyl alcohol and benzyliodide.

What are ethers?

Any organic compound in the family known as ethers has an oxygen atom bound to two alkyl or aryl groups. Ethers and alcohols share structural similarities, and water shares structural similarities with both ethers and alcohols. While both hydrogen atoms are replaced by alkyl or aryl groups in an ether, just one hydrogen atom of a water molecule is replaced by an alkyl group in an alcohol.

Thus, Initial main byproducts of the reaction between concentrated hydro iodic acid and benzyl isopropyl ether are isopropyl alcohol and benzyliodide.

To learn more about ethers from the given link below,

https://brainly.com/question/14306990

#SPJ4

It is because the traditional definition of a strong acid is based on the simplicity of proton (hydrogen ion) donation in aqueous solution.

The chemical compound phosphorus pentoxide has the molecular formula P4O10 (with its common name derived from its empirical formula, P2O5). The anhydride of phosphoric acid is this white, crystalline solid. When P2O5 is dissolved in water, it produces H3PO4, or phosphoric acid (3H2O + P2O5 2H3PO4).

Phosphorus pentoxide has a molecular formula of P4O10, but its empirical formula is P2O5. But the name of the compound, not its molecular formula, was derived from its empirical formula. The official name for all of this substance is diphosphorus pentoxide.

To know more about aqueous solution :

https://brainly.com/question/14097392

#SPJ9

Answer:

k

Explanation:

k7

Answer: C)

Explanation:

cyclononane

Answer:

False

Explanation:

Substances are of two types: Pure substances and mixtures. Pure substances include elements (made up of single kind of atoms), compounds (atoms of different element in fixed proportion). Substances are of three types: elements, compounds and mixtures.

Answer:

A non-carbonated soft drink is a homogenous mixture or a solution

Explanation:

Non-carbonated soft drinks contains water, sweetener that are evenly mixed (or uniformly mixed if this is the reagents). And since we don't see and bubbles when it's in the drink the soft drink is a solution because the components are evenly mixed.

The process for calculating the molarity of a solution:

1) Calculate the number of moles of solute by multiplying mass of solute and the inverse of molar mass.

2) Calculate the molarity of the solution by multiplying number of moles of solute and the inverse of solution volume.

n(NaNO₂) = m(NaNO₂) × 1/M(NaNO₂); multiplying mass of solute and the inverse of molar mass.

n(NaNO₂) = 4.8 g ÷ 69 g/mol

n(NaNO₂) = 0.0695 mol; the number of moles of solute

c(NaNO₂) = n(NaNO₂) × 1/V(NaNO₂);

c(NaNO₂) = 0.0695 mol ÷ 0.150 l

c(NaNO₂) = 0.463 mol/l; the molarity of the solution

Missing options:

1) Calculate the number of moles of solute by multiplying number moles of solute/mass of solute and molar mass/the inverse of molar mass.

2) Calculate the molarity of the solution by multiplying molarity of solute/number of moles of solute and solution volume/the inverse of solution volume.

More about molarity: brainly.com/question/26873446

#SPJ4

Given,

Specific heat capacity of lead = 0.128 J/g

Specific heat capacity of magnesium= 1.024 J/g

Molar heat capacity is the amount of heat needed to raise the temperature of 1 mole of a substance by 1 unit.

So,

For calculating molar heat capacity we need to multiply the specific heat capacities of the metals with their atomic masses.

Atomic mass of lead (Pb) = 207

Atomic mass of magnesium (Mg) = 24

∴ Molar heat capacity = specific heat capacity x atomic mass

Molar heat capacity of Pb=0.128 x 207 = 26.5 J

Molar heat capacity of magnesium (Mg) = 1.024 x 24 = 24.5

Hence , molar heat capacities of lead and magnesium are 26.5 and 25.5 Joules respectively.

To learn more about molar heat capacity refer- https://brainly.com/question/15080895

#SPJ4

Molar heat capacities of lead and magnesium is 26.49 and 24.5 Joules, respectively.

Given,

Lead has a specific heat capacity of 0.128 J/g.

Magnesium has a specific heat capacity of 1.024 J/g.

The quantity of heat required to increase the temperature of 1 mole of a substance by 1 unit is known as its molar heat capacity.

So, We must multiply the specific heat capacities of the metals by their atomic masses in order to determine their molar heat capacities.

Lead (Pb) has an atomic mass of 207.

Magnesium (Mg) has an atomic mass of 24.

Specific heat capacity multiplied by atomic mass gives the molar heat capacity.

Pb has a 26.5 J molar heat capacity (0.128 x 207).

Magnesium's (Mg) molar heat capacity is equal to 1.024 x 24.

Thus, lead and magnesium have molar heat capacities of 26.49 and 24.5 Joules, respectively.

To learn more about molar heat capacity refer- brainly.com/question/15080895

#SPJ4

Answer:

151 g SO₂ × [1 mol SO₂/64.06 g SO₂] = 2.36 mol SO₂

Explanation:

Volume is the correct answer

It avoids the need to make tedious, and uncertain, calculations to estimate the shell-side coefficient.

In steady flow systems, tube-side heat transfer coefficients are capable of being greatly improved over flow at the same net flow Reynolds number. The Nusselt values converge, as shown in Figure 5.21, at higher Reynolds numbers, although operation at such high net flow Reynolds numbers would negate the benefits of adopting OBRs in the design. Nu is often increased by a factor of between 10 and 30 in the lower Re region.

Due to the improved radial transport exhibited by the vertical mixing patterns, this improvement has occurred. It is obvious that in an oscillating baffled system, heat transfer coefficients that are comparable to those of smooth-walled tubes under well-developed turbulence can be attained at significantly lower (net flow) Reynolds numbers.

To learn more about shell-side coefficient from the given link:

https://brainly.com/question/25758173

#SPJ4

The true statement about mixtures is that they do not have specific compositions (option B).

Mixture is a substance made up of two or more chemical components that are not chemically linked.

This further means that the constituents of a mixture maintain or keep their individual chemical identities because there is no breaking of bonds.

As opposed to mixtures, compounds are made up of constituents that are chemically bonded to one another, hence, possess a definite composition.

Examples of mixtures are as follows:

Therefore, the true statement about mixtures is that they do not have specific compositions.

Learn more about mixtures at: https://brainly.com/question/24898889

#SPJ1

The electrons will take 7.3 times to be equal to the mass of the helium nucleus

If we want to calculate the number of electrons in the nucleus of the helium, then we have the formula for finding the number of electrons so by doing so we can get exactly the number of electrons.

The formula is that if we divide the total mass of the nucleus of the helium gas with the number of electronic mass so it will give us the number. So as a result it will take $7.28869 \times {10^{ - 59}}$ number of electrons to equal the mass of a helium nucleus.

The atomic mass of the Helium is 4.002602.

So we can conclude that the electrons will take 7.3 times to be equal to the mass of the helium nucleus.

Learn more about Helium Nucleus here: https://brainly.com/question/14576767

#SPJ1

Answer: created, destroyed, element, product

Explanation: The law of conservation of mass states that matter can neither be created nor destroyed but is transferred from one form to another. In other words, the mass of one element at the beginning of the reaction must be equal to the mass of the element at the end of the reaction.
So...the law of conservation of mass states that during a chemical reaction, mass/matter is not CREATED or DESTROYED and because of this law, there must be exactly the same number and kind of ELEMENTS on each side of a chemical equation.
To check if an equation is balanced or not, simply count the number of atoms of each element on the reactant side of the equation and check to see if there are the same number of atoms of each element on the PRODUCT side of the equation. If so, it is balanced.

Explanation:

 It drowns out some of the more delicate notes. It changes the flavour balance.

Answer:

3.63 g/mL (3 s.f.)

Explanation:

Density is the amount of substance per unit volume, and can be calculated by dividing the mass by the volume.

Given: mass= 59.6 g, volume= 16.4 mL

Density of block

= 59.6 ÷16.4

= 3.63 g/mL (3 s.f.)

For a similar question on density, check out: https://brainly.com/question/13502525

Answer:

The density calculator will help you estimate the relationship between the weight and volume of an object.

Explanation: