at low ph, the amino acid zwitterion reacts with hydronium (h3o ). what is the product of this acid base reaction

Answer: K, Ca, Se, Kr

Explanation:

The periodic trend for Zeff is that it increases as you go across a period (row) from the left to the right. In the 4th row of the periodic table, the four elements of concern are in the following order from left to right: K, Ca, Se, Kr.

R, the gas constant is equal to these three values, volume, temperature, pressure and number of moles.

Depending on the other units used in the equation, different units are used for the gas constant. The Gas Constant's Value The units used for pressure, volume, and temperature have an impact on the value of the gas constant "R". These were typical gas constant values prior to 2019. R = 8.3145 J/mol K R = 8.2057 m 3 atm/mol K R = 0.0821 litre atm/mol K. Work per degree every mole is what R means physically. Any system of units for measuring labour or energy, such as joules, or for measuring temperature at an absolute scale, like as kelvin or rankine, may be used to express it.

To know more about gas constant, here:

https://brainly.com/question/14279790

#SPJ1

The mass of sodium hydroxide produced is 39.58g.

Percent yield is the percent ratio of actual yield to the theoretical yield. It is calculated to be the experimental yield divided by theoretical yield multiplied by 100%. If the actual and theoretical yield ​are the same, the percent yield is 100%

In chemistry, yield is a measure of the quantity of moles of a product formed in relation to the reactant consumed, obtained in a chemical reaction, usually expressed as a percentage.

Given,

moles of sodium oxide = 0.532 moles

From the reaction,

Na₂O + H₂O = 2NaOH

1 mole of sodium oxide gives 2 moles of NaOH

so, 0.532 moles will give 1.064 moles of NaOH

Mass of NaOH = 1.064 × 40 = 42.56g

Theoretical yield = 42.56g

Percentage yield = 93%

Actual yield = (93 × 42.56) ÷ 100

= 39.58g

Learn more about percent yield, here:

https://brainly.com/question/17042787

#SPJ1

The concentration of hydronium ions in a solution at 25.0 °C with pH = 4.282 is 4.88 x 10^-5 M.

The pH of a solution is a measure of its acidity, which is determined by the concentration of hydronium ions (H3O+) in the solution. The pH scale is a logarithmic scale that ranges from 0 to 14, where a pH of 7 is neutral, a pH below 7 is acidic, and a pH above 7 is basic. The pH can be calculated using the expression pH = -log[H3O+]. To find the concentration of hydronium ions, the expression can be rearranged as [H3O+] = 10^-pH. Substituting the given pH value of 4.282 into the expression gives a concentration of hydronium ions of 4.88 x 10^-5 M.

In summary, the concentration of hydronium ions in a solution at 25.0 °C with pH = 4.282 is 4.88 x 10^-5 M, which can be calculated using the pH expression and the given pH value.

To learn more about solution click here: brainly.com/question/1616939

#SPJ11

If a urine sample is distinctly yellow in color, the correct answer is (c) it will have a high pH. The color of urine is influenced by many factors, such as diet, hydration status, and the presence of certain diseases or medications.

However, urine that is yellow or dark yellow in color usually indicates that the person is dehydrated, as the kidneys are retaining more water to maintain fluid balance in the body. The pH of normal urine ranges from 4.6 to 8.0, with an average of 6.0. A high pH in urine can be caused by a number of factors, including certain medications, urinary tract infections, or metabolic disorders. A high pH in urine can lead to the formation of kidney stones, which can be painful and require medical treatment. It is important to consult a healthcare provider if there are concerns about the color or pH of urine.

Learn more about urine  here:

https://brainly.com/question/29347560

#SPJ11

The answer is (B) B2H6. To determine the molecular formula of the gaseous compound of boron and hydrogen.

We need to use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.

First, we need to convert the temperature to Kelvin:

T = 3°C + 273 = 276 K

Next, we can calculate the number of moles of the gas using the ideal gas law:

n = PV/RT

n = (1.00 atm)(0.820 L)/(0.08206 L·atm/mol·K)(276 K) = 0.0354 mol

The molar mass of the compound can be calculated from the mass and number of moles:

molar mass = mass/number of moles

molar mass = 1.00 g/0.0354 mol = 28.2 g/mol

The molecular formula of the compound can now be determined by considering the possible combinations of boron and hydrogen atoms that have a molar mass close to 28.2 g/mol.

The molecular formula that comes closest to this molar mass is B2H6, which has a molar mass of approximately 27.7 g/mol. Therefore, the answer is (B) B2H6.

Learn more about gaseous compound  here:

https://brainly.com/question/31325652

#SPJ11

The pH of 0.460 M trimethylammonium iodide is 9.46. To find the pH of the solution, we need to first find the concentration of hydroxide ions, OH-. We can do this by using the Kb value of trimethylamine, which is a weak base. We can write the equilibrium expression as follows:

(CH3)3N + H2O ⇌ (CH3)3NH+ + OH-

Kb = [OH-][ (CH3)3N+]/[ (CH3)3N]

We can assume that the concentration of (CH3)3NH+ is equal to the concentration of (CH3)3NHI since it's the salt of the weak base. Therefore, we can write:

Kb = [OH-][ (CH3)3NHI]/[ (CH3)3N]

Rearranging, we get:

[OH-] = Kb[(CH3)3N]/[(CH3)3NHI]

Plugging in the values we get:

[OH-] = (6.3 x 10^-5)(0.460)/(1) = 2.898 x 10^-5 M

To find the pH, we need to take the negative log of the concentration of H+ ions which is equal to 14 - pOH.

pOH = -log[OH-] = -log(2.898 x 10^-5) = 4.54

pH = 14 - pOH = 14 - 4.54 = 9.46

Therefore, the pH of 0.460 M trimethylammonium iodide is 9.46.

To know about pH:

https://brainly.com/question/2288405

#SPJ11

Carbon, hydrogen, oxygen, and nitrogen account for more than 95% of the human body by weight. The correct option is A

An element in chemistry is a pure material made up of atoms that all share the same atomic number, or the quantity of protons in the nucleus.

The structure and operation of cells and tissues in the human body depend on the presence of these elements, which are present in a range of organic substances such as carbohydrates, lipids, proteins, and nucleic acids.

Therefore, In contrast to carbon, hydrogen, oxygen, and nitrogen which make up a larger portion of the body's weight, calcium and phosphorus are also crucial components of the human body.

Learn more about elements here : brainly.com/question/18096867

#SPJ1

The molarity of the solution is 5.36 M.

To calculate the molarity (M) of a solution, we need to divide the moles of solute by the volume of the solution in liters. First, we need to determine the moles of ammonium chloride (NH₄Cl) in the given mass. The molar mass of NH₄Cl is 53.49 g/mol.

moles of NH₄Cl = mass of NH₄Cl / molar mass of NH₄Cl

= 26.8 g / 53.49 g/mol

= 0.5 mol

Next, we convert the volume of the solution from milliliters to liters:

volume of solution = 0.25 L

Finally, we calculate the molarity:

Molarity (M) = moles of solute / volume of solution

= 0.5 mol / 0.25 L

= 2 mol/L

Therefore, the molarity of the solution is 2 M.

To learn more about molarity, here

https://brainly.com/question/31545539

#SPJ4

The temperature at which the volume of the gas is 3.42 L, when held at constant pressure, is 278 K (Option B).

To determine the temperature, we can use Charles's Law, which states that the volume of a gas is directly proportional to its temperature when the pressure is held constant.

The formula for Charles's Law is V1/T1 = V2/T2.

In this case, V1 = 3.62 L, T1 = 21.6°C + 273.15 = 294.75 K, and V2 = 3.42 L.

To find the unknown temperature T2, rearrange the formula as T2 = (V2 * T1) / V1.

Substituting the values, T2 = (3.42 * 294.75) / 3.62 = 278 K. Therefore, the temperature at which the volume of the gas is 3.42 L is 278 K.

Learn more about Charles's Law here:

https://brainly.com/question/21184611

#SPJ11

Answer: it would be d

Explanation:because it works out the most

The maximum number of grams of [tex]PH_3[/tex] that can be formed when 43.00 g of phosphorous react with excess hydrogen to form [tex]PH_3[/tex] in [tex]P_4(g) + 6H_2(g) --- > 4PH_3(g)[/tex]  is 179.42 g.

We must use stoichiometry to estimate the molar mass of phosphine       ([tex]PH_3[/tex]) in order to compute the maximum amount of grammes of [tex]PH_3[/tex] that can be produced.

Let's begin by figuring out the molar mass of phosphorus ([tex]P[/tex]):

P has a molar mass of 31.00 g/mol.

Next, we can apply the balanced equation's calculated molar ratio of phosphorus ([tex]P_4[/tex]) to phosphine ([tex]PH_3[/tex]):

1 mol P4 interacts to create 4 mol [tex]PH_3[/tex].

Let's now determine how many moles of phosphorus ([tex]P_4[/tex]) there are:

The formula for calculating the number of moles of [tex]P_4[/tex] is:

mass of [tex]P_4[/tex] / molar mass of [tex]P_4[/tex]= 43.00 g / 31.00 g/mol = 1.38 mol (rounded to two decimal places).

We can determine the number of moles of phosphine ([tex]PH_3[/tex]) produced using the molar ratio:

The formula for the number of moles of [tex]PH_3[/tex]:

4 mol [tex]PH_3[/tex]/mol P4 * 1.387 mol [tex]P_4[/tex] = 5.54 mol (rounded to two decimal places)

Finally, we can figure out how much [tex]PH_3[/tex] weighs:

To the nearest two decimal places, the mass of [tex]PH_3[/tex] is calculated as follows:

5.548 moles * (31.00 g/mol + 3 * 1.01 g/mol) = 179.42 g.

Therefore, when 43.00 g of phosphorus combines with too much hydrogen, the most [tex]PH_3[/tex] that may be produced is 179.42 g.

To know more about grams of [tex]PH_3[/tex] using given balance equation

brainly.com/question/30877951

The number of protons in element Y is 8, as its atomic number is 8, which determines the number of protons in an atom.

The atomic number of an element represents the number of protons in its nucleus. Therefore, element Y has 8 protons. The fact that the nucleus of atom Y is 18 times heavier than that of hydrogen is not directly relevant to determining the number of protons. The mass of an atom is primarily determined by the number of protons and neutrons in its nucleus.

However, the information provided can be used to determine the mass number of atom Y, which is the sum of its protons and neutrons. Assuming that atom Y is neutral, it must have 8 electrons to balance the charge of its 8 protons. Therefore, the complete atomic symbol of element Y is 8Y, indicating that it has 8 protons and an atomic mass of approximately 18 (since it has 10 neutrons).

Learn more about protons here:

https://brainly.com/question/12535409

#SPJ11

Decreasing the temperature of the liquid while increasing the pressure of the gas will not cause as great of an increase in solubility as increasing the pressure alone.

The solubility of a gas in a liquid is directly related to the pressure of the gas above the liquid. Therefore, increasing the pressure of the gas above the liquid will always cause the greatest increase in the solubility of a gas in a liquid. This is known as Henry's Law, which states that the solubility of a gas in a liquid is directly proportional to the pressure of the gas above the liquid. As the pressure of the gas increases, more gas molecules are forced into the liquid, increasing the solubility. Temperature also affects solubility, but it is not as significant as pressure. As the temperature of a liquid increases, the solubility of a gas generally decreases. Therefore, decreasing the temperature of the liquid while increasing the pressure of the gas will not cause as great of an increase in solubility as increasing the pressure alone.

To know more about solubility visit :

https://brainly.com/question/31900586

#SPJ11

There are 38.92 grams of H3PO4 in 265 mL of a 1.50 M solution of H3PO4.

To solve this problem, we need to use the formula:

[tex]molarity = moles of solute / liters of solution[/tex]

We can rearrange the formula to solve for moles of solute:

moles of solute = molarity x liters of solution

We are given the following information:

molarity = 1.50 M

liters of solution = 0.265 L (converted from 265 mL)

We can now calculate moles of H3PO4:

moles of H3PO4 = 1.50 M x 0.265 L = 0.3975 moles

Finally, we can convert moles to grams using the molar mass of H3PO4:

1 mole H3PO4 = 98 g H3PO4

0.3975 moles H3PO4 x 98 g H3PO4/mol = 38.92 g H3PO4

Therefore, there are 38.92 grams of H3PO4 in 265 mL of a 1.50 M solution of H3PO4.

Learn more about H3PO4  here:

https://brainly.com/question/6373152

#SPJ11

The electron configuration of 1s22s22p6 indicates that the element has a full valence shell consisting of 8 electrons. Therefore, the species with this electron configuration would be a noble gas.

Looking at the options given, we can see that Na+ has lost one electron from its valence shell and would have the electron configuration of 1s22s22p6, making it a possible answer. O2- has gained two electrons and would have the electron configuration of 1s22s22p6, making it a possible answer. F- has gained one electron and would have the electron configuration of 1s22s22p6 3s23p6, making it an incorrect answer. Therefore, the correct answer is A) 1 and 2 only.

The electron configuration 1s22s22p6 represents a stable, full outer electron shell. The correct answer is B) 1 and 3 only. For Na+ (sodium ion), the configuration is 1s22s22p6 as it has lost one electron from its original configuration, resulting in a full outer shell. For O2- (oxide ion), the configuration is different, as it gains two electrons to achieve a stable state: 1s22s22p63s23p6. Finally, for F- (fluoride ion), the electron configuration is indeed 1s22s22p6, as it gains one electron to complete its outer shell. Therefore, only Na+ and F- have the desired electron configuration.

To know about electrons visit:

https://brainly.com/question/1255220

#SPJ11

The most correct statement that describes chemical equilibrium is option (e) which states that the rates of the forward and reverse reactions become equal, and the reaction quotient is equal to the equilibrium constant.

At equilibrium, the concentration of reactants and products remains constant, and the reaction is said to be in a state of dynamic equilibrium. The forward and reverse reactions continue to occur, but at equal rates, which maintains the concentration of reactants and products.

The reaction quotient is a measure of the relative concentrations of reactants and products at any given time during the reaction. When the reaction quotient is equal to the equilibrium constant, the system is at equilibrium. Thus, option (c) is also a correct statement. Option (a) is incorrect because reactions do not cease at equilibrium, they are just occurring at equal rates. Option (d) is incorrect because some reactants may still be present at equilibrium.

To know more about chemical equilibrium visit:

https://brainly.com/question/4289021

#SPJ11

The molar mass of the gas at 125°C is approximately 43.4 g/mol. Therefore, the correct answer is not listed as an option.

We need to use the ideal gas law, PV = nRT, to solve for the number of moles of gas present:

n = (PV) / RT

At STP, P = 1 atm and T = 273 K, so:

n = (1 atm * 10.0 L) / (0.0821 L atm/mol K * 273 K) = 0.412 mol

Now, we can use the formula for molar mass, M = m / n, where m is the mass of the gas:

M = 17.90 g / 0.412 mol = 43.4 g/mol

So the molar mass of the gas at 125°C is approximately 43.4 g/mol

Therefore, the correct answer is not listed as an option.

Learn more about molar mass  here:

https://brainly.com/question/31545539

#SPJ11

For an O-H bond has a length of 9.6 x 10⁻¹¹ nm, the approximate size of a water molecule, H₂O is D) 3 x 10⁻¹⁰ nm.

The approximate size of a water molecule, H₂O, can be estimated by adding the length of two O-H bonds and the diameter of an oxygen atom.

2(O-H bond length) + oxygen atom diameter = 2(9.6 x 10⁻¹¹ nm) + 1.52 x 10⁻¹⁰ nm ≈ 2.88 x 10⁻¹⁰ nm

Therefore, the approximate size of a water molecule, H₂O, is D) 3 x 10⁻¹⁰ nm.

Find out more on bonds here: https://brainly.com/question/29282058

#SPJ1

Due to a number of variables, Venus's atmosphere contains substantially more carbon dioxide than Earth does.

First, Venus experienced a runaway greenhouse effect, in which higher [tex]CO_2[/tex] concentrations caused higher temperatures, which in turn released more [tex]CO_2[/tex] from the planet's surface. The greenhouse impact was further exacerbated by this positive feedback loop. Second, unlike Earth, Venus does not have a robust carbon cycle that controls carbon dioxide levels through mechanisms like photosynthesis and the breakdown of [tex]CO_2[/tex] in seas. Carbon dioxide is a gas that is taken up by plants on Earth and transformed into organic matter. It is also dissolved in the oceans. Additionally, the absence of plate tectonics on Venus prohibits carbon dioxide from being recycled back into the planet's interior.

To know more about carbon cycle, here

brainly.com/question/30633292

#SPJ4

--The complete Question is, Why does Venus's atmosphere have much more carbon dioxide than Earth's atmosphere? --

Answer:  What Happens When the Bonds in the Atoms in the Reactants Break​?

Explanation: In a chemical reaction, bonds between atoms in the reactants are broken and the atoms rearrange and form new bonds to make the products.

A Visual Example Would Look Something Like This:

A decomposition reaction is a type of chemical reaction where a compound breaks down into two or more simpler substances. This process is typically induced by heat, light, or an electrical current.

In a decomposition reaction, the reactant compound typically breaks down into two or more products, which can be elements or simpler compounds.

There are various types of decomposition reactions, such as thermal decomposition, electrolytic decomposition, photolytic decomposition, and catalytic decomposition, depending on the type of energy that is used to initiate the reaction.

For example, the decomposition of hydrogen peroxide (H2O2) into water (H2O) and oxygen (O2) is a decomposition reaction:

[tex]2H_2O_2 --- > 2H_2O + O_2[/tex]

Thus, this is decomposition reaction.

For more details regarding decomposition reaction, visit:

https://brainly.com/question/16987748

#SPJ1

[tex] \huge \red {Answer} [/tex]

The answer is (A) 1100 mL. The balanced chemical equation for the decomposition of KClO3 is:

2KClO3(s) → 2KCl(s) + 3O2(g)

According to the stoichiometry of the reaction, 2 moles of KClO3 produce 3 moles of O2.

First, we need to calculate the number of moles of O2 produced by the decomposition of 3.00 g of KClO3.

The molar mass of KClO3 is:

39.10 g/mol (K) + 35.45 g/mol (Cl) + 3 x 16.00 g/mol (O) = 122.55 g/mol

Therefore, 3.00 g of KClO3 is equal to:

3.00 g / 122.55 g/mol = 0.0245 mol KClO3

According to the stoichiometry of the reaction, 0.0245 mol KClO3 produces:

0.0245 mol KClO3 x (3 mol O2 / 2 mol KClO3) = 0.0368 mol O2

The ideal gas law can be used to calculate the volume of O2 produced:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles, R is the gas constant (0.0821 L·atm/(mol·K)), and T is the temperature in Kelvin.

Converting the temperature of 24.0°C to Kelvin:

T = 24.0°C + 273.15 = 297.15 K

Substituting the values into the ideal gas law equation:

V = (nRT) / P = (0.0368 mol) x (0.0821 L·atm/(mol·K)) x (297.15 K) / 0.717 atm

V = 1.10 L or 1100 mL

Therefore, the answer is (A) 1100 mL

Learn more about chemical equation here:

https://brainly.com/question/28792948

#SPJ11

Answer:

some of the questions are to be asked and answered scientifically because:

1.scientific method is less biased

Answer:

The first step of the scientific method is the "Question." This step may also be referred to as the "Problem." Your question should be worded so that it can be answered through experimentation. Keep your question concise and clear so that everyone knows what you are trying to solve.

Hope this helps :)

Pls brainliest...

The enthalpy change for the dissolution process of 2.00 g NaOH in 50.0 ml water is approximately -27.2 kJ/mol.

This can be calculated using the equation:

ΔH = mcΔT / n

Where:

ΔH = enthalpy change (in kJ/mol)

m = mass of NaOH dissolved (in g)

c = specific heat capacity of water (4.18 J/g°C)

ΔT = temperature change of the water (7.00°C)

n = number of moles of NaOH (which can be calculated using the molar mass of NaOH, 40.00 g/mol)

Substituting the values given, we get:

ΔH = (50.0 g)(4.18 J/g°C)(7.00°C) / (2.00 g / 40.00 g/mol)

ΔH = -27,200 J/mol = -27.2 kJ/mol

Therefore, the enthalpy change for the dissolution process of NaOH in water is exothermic, releasing 27.2 kJ of energy per mole of NaOH dissolved. This means that the process is spontaneous and favors the formation of a solution. The negative sign of the enthalpy change indicates that the process releases heat energy into the surroundings, causing the temperature of the water to rise.

To learn more about enthalpy click brainly.com/question/16720480

#SPJ11

The second law of thermodynamics states that in any thermodynamic process, the total entropy of a system and its surroundings always increases. This means that energy tends to flow from hotter objects to cooler objects, and that it is impossible for heat to flow from a cooler object to a hotter object without the input of additional energy.

One scenario in which I have observed this law in action is when I was cooking on a stove. When I turned on the burner, the heat from the flame transferred to the pot, causing the molecules in the pot to vibrate faster and increase in temperature. As the pot became hotter, heat also transferred from the pot to the air around it, which also increased in temperature.

However, as the air around the pot was cooler than the pot itself, the transfer of heat from the pot to the air caused the pot to lose heat energy, eventually causing the burner to turn off once the desired temperature was reached. This process demonstrates the second law of thermodynamics, as heat naturally flows from hotter objects (the pot) to cooler objects (the air), and it is impossible for heat to flow from a cooler object to a hotter object without additional energy input.

To know more about thermodynamics state visit:-

https://brainly.com/question/16818736

#SPJ11

³⁸₁₈Ar nucleus completes the given equation, hence option D is correct.

The equation provided illustrates how an unstable chlorine isotope breaks down into a beta particle and an argon nucleus. To create an Argon nucleus that is more stable, the nucleus emits a beta particle.

Stable isotopes and supposedly unstable or radioactive isotopes are the two categories into which isotopes fall in science. These last ones are stable and don't produce radioactive radiation.

While Xenon and other isotopes are known to be stable, Xenon-124 and Xenon-136 deteriorate over the course of several trillion years.

Learn more about nucleus, here:

https://brainly.com/question/18852772

#SPJ1

The pH of a 0.15 M aqueous solution of KF is approximately 2.72. To determine the pH of a 0.15 M aqueous solution of KF, we first need to understand the chemical properties of the compound.

KF is a salt of the strong base potassium hydroxide (KOH) and the weak acid hydrofluoric acid (HF). When dissolved in water, KF dissociates into K+ and F- ions, while HF partially dissociates into H+ and F- ions due to its weak acid nature.

Using the Ka value given for HF, we can calculate the concentration of H+ ions in the solution, which is equal to 1.9 x 10^-3 M. We can then use the formula for pH, which is equal to -log[H+], to calculate the pH of the solution. Thus, the pH of a 0.15 M aqueous solution of KF is approximately 2.72.

To learn more about Aqueous refer to:

https://brainly.com/question/30215562

#SPJ11

The pH of the resulting solution after adding 24.0 mL of 0.240 M HCl(aq) is approximately 2.24, indicating that it is a highly acidic solution.

To calculate the pH of the resulting solution after adding 24.0 mL of 0.240 M HCl(aq), we first need to determine the moles of HCl added. Moles of HCl = volume (L) × concentration (M) = 0.024 L × 0.240 M = 0.00576 moles.
Assuming the solution is diluted to a final volume of 1 L, the concentration of HCl is now 0.00576 moles / 1 L = 0.00576 M. Since HCl is a strong acid that completely dissociates in water, the concentration of H+ ions will also be 0.00576 M.

Next, we can use the pH formula: pH = -log10[H+]. Substituting the concentration of H+ ions, pH = -log10(0.00576) ≈ 2.24.

To know about solution visit:

brainly.com/question/1616939

#SPJ11

The formula masses of water, propene, and 2-propanol are 18.015 g/mol, 42.081 g/mol, and 60.096 g/mol, respectively.

The formula mass, also known as the molecular weight, is the sum of the atomic masses of all the atoms in a molecule. For water, H2O, the formula mass would be 2(1.008) + 1(15.999) = 18.015 g/mol. For propene, C3H6, the formula mass would be 3(12.011) + 6(1.008) = 42.081 g/mol. Finally, for 2-propanol, C3H8O, the formula mass would be 3(12.011) + 8(1.008) + 1(15.999) = 60.096 g/mol. In conclusion, It is important to know the formula mass as it can be used to determine the amount of substance in a given sample using Avogadro's number and the mass of the sample.

To know more about formula masses visit:

brainly.com/question/28647347?referrer=searchResults

#SPJ11