at one instant, a 15.0-kg sled is moving over a horizontal surface of snow at 4.50 m/s. after 8.70 s have elapsed, the sled stops. use a momentum approach to find the magnitude of the average friction force acting on the sled while it was moving.

It would take a blue whale from one side of the Pacific Ocean to find the other at a speed of 5 mph for the 4000 miles, which is approximately 800 hours or 33 days.

The speed of the organism is determined by its body structure and how nature designed it, such as in some fast-swimming fish, which have different body designs than some slow-moving fish. Because of their speed, they can escape and flee predators.

Hence, it would take a blue whale from one side of the Pacific Ocean to find the other at a speed of 5 mph for the 4000 miles, which is approximately 800 hours or 33 days.

Find out more about the speed here.

https://brainly.com/question/22802060

#SPJ1

The statements that are correct and relevant to solving this problem are:

-The information contains the conversion factor 45s/135mm²

-The starting point for the calculation is 7903 mm².

-The problem assumes that the conversion between seconds and hours is known.

Calculation is both a process and a movement. Calculation's ultimate result is also a consequence of calculated action.

The calculator is a machine which thus calculates the average numbers and displays the results on a screen. It has a numerical keypad.

starting point is 7903 mm²

whit will be

A sec, min or her. (Here hour)

hour.

Assumes that the conversion between second and

hour is known.

Conversion factor.4513545-X 7903 = 2634.33 sec135

or 2634.33

0.732 hour

To know more about calculation visit:

brainly.com/question/29131869

#SPJ4

Complete question:

Answer: v = 11149.3 m/s

Explanation:

Assuming that the values in your question were supposed to have exponents.

v = minimum speed

r = distance from center of earth

= radius of earth + height above the surface

= (6.371 * 10^6 m) + (0.40 * 10^5 m)

= 6.411 x 10^6 m

M = mass of earth = 5.974 x 10^24 kg

m = mass of meteor

Using conservation of energy

GMm/r = (0.5) m v^2

GM/r = (0.5) v^2

(6.67 * 10^-11)(5.974 * 10^24)/(6.411 * 10^6) = (0.5) v^2

62153455 = (0.5)v^2

Divide both sides by 0.5

124306910 = v^2

Square root both sides

v = 11149.3 m/s

Increased population expansion directly increases the demand for resources like water. When the population's need for water exceeds the availability from sources on the surface, such as rivers and lakes underground water is tapped.

In example, population growth will reduce the amount of water per person accessible since increased per capita water usage brought on by development will raise water demand, placing stress on the local water supply.

Producing food Population growth results in increased water consumption as well as increased water requirements for food production. We will need to pump groundwater more quickly than it can be extracted in order to meet the demands for food production brought on by the rapid increase in population.

To know more about population growth visit:

https://brainly.com/question/18415071

#SPJ4

The ball of mass 200g reaches a height of 17.2m when it is thrown up at 25 m/s at 40 degrees, the time taken to reach peak height is 1.86s and the total time taken to fall back is 3.72s.

Given mass of the ball (m) = 200g

Initial speed of ball (u) = 25m/s

The angle at which ball is thrown = θ = 40 degrees

The horizontal velocity of ball = uxsinθ = 25 x sin 40 = 18.6m/s

The vertical velocity of ball = uycosθ = 25 x cos 40 = -16.6m/s

(a) Maximum height reached (h) = ux^2sin^2θ/2g where g is the gravitational acceleration.

Then h = (18.6)^2/2 x 10 = 17.2m

(b) The final velocity at maximum height (Vfy) = 0

We know that from Newtons laws of motion v = u + at then

Vy = uxsinθ + (-gt)

then t = uxsinθ/g = 18.6/10 = 1.86s

(c) The amount of time required for an upward and downward route is equal. So,  total time taken by the ball to return to the ground = 1.86+1.86 = 3.72s.

To learn more about velocity click here https://brainly.com/question/18084516

#SPJ4

Instantaneous power output of a 3-phase 60 Hz generator will not be constant under following condition when the load is balanced.

Instantaneous power output of a single phase 60 hz generator will be constant under reactive power.

Responsive power is otherwise called: ghost power. One more method for making sense of this is that responsive power is the resultant power in watts of an air conditioner circuit when the ongoing waveform is out of stage with the waveform of the voltage, normally by 90 degrees assuming the heap is simply receptive and is the consequence of either capacitive or inductive burdens. A model is fueling a brilliant light, in a responsive burden energy stream toward the heap a fraction of the time, though in the other half power streams from it, which gives the deception that the heap isn't dispersing or consuming power. Receptive power is one of the three kinds of force present in stacked circuits.

Learn more about reactive power:

brainly.com/question/23230296

#SPJ4

It takes 5.0 s for a wave to travel 3.0 m along the spring.

The time it takes for a wave to travel 3.0 m along the spring is 5.0 s. This can be calculated by dividing the distance (3.0 m) by the wave speed, which is equal to the frequency (2.5 Hz) multiplied by the distance between successive peaks (0.60 m).

3.0 m / (2.5 Hz x 0.60 m) = 5.0 s

What is frequency?

Frequency is a measure of the number of times a particular event or phenomenon occurs within a given period of time. It is usually expressed as an oscillations per second (Hertz). Frequency is an important measure in many fields, including physics, engineering, electronics, and music.

Therefore, It takes 5.0 s for a wave to travel 3.0 m along the spring.

To learn more about frequency

Here: https://brainly.com/question/254161

#SPJ1

It is exactly because of the expanding cosmos that we can see objects that are up to 46.1 billion light-year away. The range of objects we can perceive and potentially reach will always be constrained.

Why can't we observe a galaxy that is 15 billion years old?

Answer and justification According to prevailing opinion, we can't see a galaxy 15 billion light-years away because the universe is thought to be less than 14 billion years old.

Why can we observe objects 13 billion light-years away?

Since light travels at a finite speed, if we witness an object 13 billion light years distant, the light has been moving in our direction for 13 billion years. In essence, we perceive that item as

To know more about light-year visit:

brainly.com/question/10321474

#SPJ4

A is provided with the proper procedure by moles x molar mass. This same mass metric grams of one mole of an ingredient is its molar mass.

The proportion of substance in a thing is measured by its mass. That thing will be the same mass no matter where it is in the enormous universe. Contrarily, weight is a measurement that indicates how much gravitational potential energy is being applied to an object.

A pure element's atomic mass in number of atoms (amu) or grams for every mole (g/mol) is proportional to the mass about one mole of its elements in grams. Despite the fact that mass can be stated as either amu or g/mol, g/mol.

To know more about mass visit:

https://brainly.com/question/11954533

#SPJ4

The kinetic energy of an object at a given instant is given by the formula KE = 1/2 * m * v^2, where m is the mass of the object and v is its velocity.

In this scenario, the net force acting on the object decreases linearly throughout the displacement, as shown on the graph, and reaches zero at the end of the displacement. Therefore, the object's velocity at the instant the net force is zero is equal to its final velocity, which is the velocity of the object when it comes to rest.

Since the net force acting on the object is zero at this point, the work done by the net force is also zero. Therefore, the initial kinetic energy of the object is equal to its final kinetic energy, which is the kinetic energy of the object when it comes to rest.

Therefore, we can use the formula for kinetic energy to find the kinetic energy of the object at the instant the net force is zero:

KE = 1/2 * m * v^2

KE = 1/2 * (3.0 kg) * (0 m/s)^2

KE = 0 J

The kinetic energy of the object at the instant the net force is zero is 0 J. This means that the object has come to rest and all its kinetic energy has been transformed into other forms of energy like heat or sound.

The amount indicated by is not fixed and changes over time. In situations where the linear acceleration is not zero, the velocity is always changing.

The first case is true

Since it depends on time, is not constant?

The amount indicated by is not fixed and changes over time. In situations where the linear acceleration is not zero, the velocity is always changing.

The dimension of the quantity albo will be ufa au av u t when calculating a particle's velocity as a function of time t using the formula v = a(1 - eb), where a and b are constants. (1 - e-b) Greutate, urb'a 221 Aich, a zat a2b3c faut Eleft.

The amount indicated by is not fixed and changes over time. When linear acceleration is absent  .

To learn more about time refer to:

brainly.com/question/17146782

#SPJ1

The quantity represented by v is a function of time (i.e., is not constant).

True or false

A  particle moves with constant acceleration a. The expression VI +80 represents the particles velocity at what instant in time.

A. At a time T=zero

B. At the initial time

A particle starts from the origin at time t = 0 and moves along the positive x - axis. The graph of velocity with respect to time is shown in figure. What is the position of the particle at time t = 5s?

There are two prominent stars in the sky that are spatially separated by about two meters.

Which constellation has two of the brightest stars in the universe?

Second brightest and the brightest star in the night sky is Sirius, which is in the constellation Canis Major. With an apparent magnitude of -1.46, Sirius, the second brightest star, can be seen from anywhere. The Canis Major constellation contains the bright star in question. It is the Alpha star of this constellation.

Which of the two shining stars is it in the sky?

The Sun is the brightest star that can be seen from Earth and has a magnitude of 26.74. Sirius comes in second with a magnitude of 1.46 mag.

To learn more about angular distance here:

https://brainly.com/question/25549266

#SPJ4

The power of the hot rod of mass 2000 kg is 580645.16 W.

Power is the rate at which work is done.

To caculate the power output of the hot rod, we use the formula below.

Formula:

Where:

Substitute these values into equation 1

Hence, the power is 580645.16 W.

Learn more about power here: https://brainly.com/question/25864308

#SPJ1

False: Waves are generated when the wave's crest crashes into the bottom of the wave, which is travelling more quickly.

A wave is an energetic disturbance in such a medium that doesn't include any net particle motion. Elastic deformation, a change in pressure, a magnetic or electrical intensity, an electric potential, or a change in temperature are a few examples.

Transverse and longitudinal waves are the two types of waves. While longitudinal waves are similar to those of sound, composed of alternating compressions & rarefactions in a medium, transverse waves were like those on water, having their surface moving up and down.

To know more about Waves visit:

https://brainly.com/question/25954805

#SPJ4

In a vacuum, both the feather and the rock would fall at the same rate due to the absence of air resistance.

To learn more about resistance refer:

brainly.com/question/17563681

#SPJ4

Value of electric field at x=1m is

electric field E= [tex]\frac{-dV}{dx} =[/tex]  [tex]- \frac{-d(5x^{2} -10x - 9)}{dx}[/tex]

electric field E= -(10x-10)

electric field E= 0

An electric field is a physical phenomenon that surrounds electrically charged particles and exerts force on any other charged particles nearby, either attracting or repelling them. It can also refer to the physical field surrounding a system of charged particles.Electric charges and time-varying electric currents are the building blocks of electric fields. The electromagnetic field, one of the four fundamental interactions (also known as forces) of nature, manifests itself in both electric and magnetic fields.Electrical technology makes use of electric fields, which are significant in many branches of physics. For instance, in atomic physics and chemistry, the electric field acts as an attracting force to hold atoms' atomic nuclei and electrons together.

Learn more about electric field

brainly.com/question/12324569

#SPJ4

A bar rotates horizontally about its center, reaching a maximum angular velocity in 6 complete rotations from rest and has a constant angular acceleration of 0.110 radians.

What is angular acceleration?

The angular acceleration is the rate at which the angular velocity of an object is changing.

Therefore, since the angular acceleration of the bar is constant, this means that the angular velocity of the bar is increasing at a constant rate.

To find the angular velocity at any given time, we can use the equation: angular velocity = angular acceleration x time.

To find the final angular velocity, we can use the equation: final angular velocity = initial angular velocity + angular acceleration x time.

Therefore, the final angular velocity of the bar after 6 complete rotations is: 0 + 0.110 radians/s x (6 x 2π) = 6.832 radians/s.

To find the angle that the bar has rotated through, we can use the equation: angle = angular velocity x time

Therefore, the angle that the bar has rotated through after 6 complete rotations is: 6.832 radians/s x (6 x 2π) = 42.5 radians.

It's worth noting that angular velocity is a vector quantity, it's magnitude is given in radians/s and its direction is given by the right hand rule.

To learn more about angular acceleration refer:

brainly.com/question/13014974

#SPJ4

Complete question is:

A bar rotates horizontally about its center, reaching a maximum angular velocity in 6 complete rotations from rest and has a constant angular acceleration of 0.110 radians. The movement of the interia of the bar about the raxis of the rotation is about 0.0216kgm^.

a. Show the final angular velocity of the bar is 3 radians.

b. Draw the variation with time t of the angular displacement 0 of the bar during the acceleration .

c. Calculate the torque acting on the bar while it is accelerating.

d. The torque is removed. The bar comes to rest in 30 complete rotations with constant angular deceleration. Determine the time taken for the bar to come to rest.

(a) The wavelength of a 300 GHz EM wave propagating in free space is 10 cm.

(b) The frequency of an EM wave with λ = 0.1cm is 3 x 10^7 MHz

(c) The dBm equivalent of 120 dB is 120 dBm if 0dBm corresponds to 1mW = 10^-3 W.

To learn more about wavelength refer:

brainly.com/question/10750459

#SPJ4

A 300 GHz electromagnetic wave traveling through free space has a wavelength of 10 cm.

(b) An EM wave with  = 0.1cm has a frequency of 3 x 10⁷ MHz.

(c) The dBm equivalent of 120 dB is 120 dBm if 0 dBm is equivalent to 1mW = 10 ⁻³W.

(a) The equation relates an EM wave's frequency to its wavelength:

= c/f, where f is the frequency of the wave, c is the vacuum speed of light (approximately 3 x 10⁸ m/s), and  is the wavelength.

We can plug in the values to determine the wavelength since the wave has a frequency of 300 GHz:

= c/f = (3 x 10⁸ m/s) / (300 x 10⁹ Hz) = (3/300) x 10⁻¹ m = 0.01 m = 10 cm

(b)  The following equation describes the relationship between an EM wave's frequency and wavelength:  f = c/, where f is the frequency, c is the vacuum light speed (about 3 x 10⁸ m/s), and is the wave's wavelength.

We can plug in the values to determine the frequency because the wave's wavelength is 0.1 cm:

f = c/ = (3 x 10⁸ m/s) / (0.1 x 10⁻² m)

  = (3 x 10⁸ m/s) / (0.1 x 10⁻² m)

   = (3 x 10⁸ m/s) / (0.1 x 10⁻² m)

    = (3 x 10¹⁰ Hz)

    = (3 x 10⁷ MHz)

(c) The power level is expressed in terms of one milliwatt .The formula for converting dBm to watts (W) is as follows:

Given that 0 dBm corresponds to 1 mW = 10⁻³ W, we can use this equation to determine the dBm equivalent of 120 dB: P(dBm) = 10 log10(P(W)/1mW

P(dBm) equals 120 dBm for 10 log10(120/1).

Learn more about wavelength:

brainly.com/question/10750459

#SPJ4

As per the problem statement the volume of the solid is (√3/4)*x^2.

Volume is the measure of space occupied by an object or contained within a space. It is typically measured in cubic units, such as cubic centimeters, cubic meters, or cubic feet.

The region shown is the base of a solid with an equilateral triangle as each of its cross section perpendicular to the x-axis. Since the cross sections are equilateral triangles, the length of the sides of each triangle will be the same, which is the value of x.

Therefore, the volume of the solid can be calculated using the formula V = A*h, where A is the area of the base and h is the height of the solid.

The area of the base can be calculated using the formula A = (√3/4)*x^2, where x is the length of the sides of the equilateral triangle.

The height of the solid can be calculated using the formula h = y2-y1, where y1 and y2 are the y-coordinates of the two endpoints of the region.

Consequently, the solid's volume is determined by:

V = (√3/4)*x^2*(y2-y1)

For the given region, the volume of the solid is V = (√3/4)*x^2*(1 - 0) = (√3/4)*x^2

To learn more about volume

https://brainly.com/question/14197390

#SPJ4

The volume of the semi circle in cubic centimeters  is 3.75 * 10^22 cm^3

We know that the first step that we would have to take is to be able to get the area of the semi circle and when we do that we are going to have from the values that we have in the question;

A = πr^2

A = area

r = radius

Where r = 2000km or 2 * 10^8 cm

A = 3.142 * (2 * 10^8)^2

A = 1.25 * 10^17 cm^2

Then we would have;

Volume = area * thickness

Thickness = 3000 meters or 3 * 10^5 cm

Volume = 1.25 * 10^17 cm^2 * 3 * 10^5 cm

= 3.75 * 10^22 cm^3

Learn more about volume:https://brainly.com/question/1578538

#SPJ1

The magnitude of θ such that the volume of the cone is a maximum is  56.58 degrees when a sector with central angle is cut from a circle of radius 12 inches.

Given the radius of circle (R) = 12 inches

Let the central angle (T) = θ

Volume of cone (V) = πr^2h/3

Let the slant height in cone = s

Let the height of cone = h

we know that for the cone, (r) = sT/(2π)

Then h = √(s^2 - r^2)

Therefore, V = π( sT/(2π) )^2√(s^2 - r^2)/3

To maximize V we need to find dV/dT such that dV/dT = 0

dV/dT = d/dT[π( sT/(2π) )^2√(s^2 - r^2)/3]

Let  θ = T then dV/dθ = d/dθ[π( sθ/(2π) )^2√(s^2 - r^2)/3]

(2θs^3/4π)√[(4π^2-θ^2)/(4π^2)] - (θ^3s^3)/(4π√[(4π^2-θ^2)/(4π^2)]) = 0

(2θs^3/4π)√[(4π^2-θ^2)/(4π^2)] = (θ^3s^3)/(4π√[(4π^2-θ^2)/(4π^2)])

θ^2 = 4π^2/(4π^2+1)

θ = 56.58 degrees

Hence the magnitude of θ such that the volume of the cone is a maximum is 56.58 degrees.

To learn more about magnitude click here https://brainly.com/question/29766788

#SPJ4

The tension in the string before the metal is immersed is 10 N. The tension in the string after the metal is immersed is 6.296 N.

The forces tugging on the rope from either end cause a certain strand of string or rope to be under strain. Recall that force equals mass times acceleration. Any change in acceleration or mass of the objects the rope is supporting will result in a change in tension in the rope, assuming the rope is stretched firmly.

(a) The tension in the string before the metal is immersed,

Given,

Mass of place of aluminum (m) = 1.00 kg

density of aluminum (ρ_s) = 2700 kg/m^3

density of water (ρ_w) = 1000 kgm^-3

When the aluminum piece is suspended in air,

T = mg

T = 1 ×10

T = 10 N

(b) When the aluminum piece is completely immersed in water,

mg = T +F_B

Where, F_B = buoyant force acting on aluminum

T= tension in the string

T= mg − F_B

T = ρ_sV_s×g - ρ_LV_L×g

After simplifying we get,

T = mg (1 - ρ_L/ρ_s)

T = 1 × 10(1 - 1000/2700)

T = 10(1 - 10/27)

T = 6.296 N

To know more about tension visit:

https://brainly.com/question/29266055

#SPJ4

The velocity 'v' of the cube as it leaves the block would be, v=[tex]\sqrt{\frac{2gR}{1+m/M} }[/tex].

Conservation of mechanical energy is a principle that states that the total mechanical energy of a closed system remains constant as long as no energy is added or removed from the system. In this case, the system consists of the two blocks and the table on which they rest. Since there is no friction and no external force acting on the system, the total mechanical energy (potential energy + kinetic energy) remains constant as the cube slides down the track. This allows us to use the initial potential energy of the cube to calculate its final kinetic energy, and thus its velocity as it leaves the block.

The magnitude of velocity of the cube as it leaves the block can be found using Conservation of mechanical energy.

Initially, the cube is at rest at the top of the track and has only potential energy, given by m₁gh, where g is the acceleration due to gravity and h is the height of the track. As the cube slides down the track, it loses potential energy and gains kinetic energy.

we have

mu=mv−−(1)

wall=Δk

mgR = [tex]\frac{1}{2} mv^{2} + \frac{1}{2} mu^{2}[/tex]

mgR = [tex]\frac{1}{2} mvH_{2}[/tex] + [tex]\frac{1}{2} (\frac{mv}{M} ) ^{2}[/tex] × M

mgR= [tex]\frac{1}{2} mv^{2} + \frac{1}{2} \frac{m^{2} v^{2}}{M}[/tex]

So, v²=[tex]\frac{2gR}{1+m/M}[/tex]

So, v= [tex]\sqrt{\s{\frac{2gR}{1+m/M} }}[/tex].

To know more about potential energy, visit:

https://brainly.com/question/24284560

#SPJ1

(a) The specific volume of air in the cylinder is heated without changing its temperature until its volume doubles is 0.861 m³/kg.

(b) Specific volume of air in the cylinder increases.

(c) The pressure of air in the cylinder decrease.

The amount of cubic metres that one kilogramme of matter takes up is known as the specific volume. It is the reciprocal of density and the ratio of a substance's volume to mass. In other words, specific volume is inversely related to density. Any state of matter may be measured or calculated for specific volume, but calculations involving gases are where it is most frequently applied.

Though it can also be expressed in terms of millilitres per gramme (mL/g) or cubic feet per pound (ft³/lb), the standard unit for specific volume is cubic metres per kilogramme (m³/kg).

(a) Specific volume =

[tex]$ \mathrm{ \hat V = \frac{V}{m} = \frac{RT}{P} }[/tex]

[tex]$ \mathrm{ =\frac{\overline RT}{mP} }[/tex]

[tex]$ \mathrm{ = \frac{8.314 \times 300}{28.97 \times 100} }[/tex]

[tex]$ \mathrm{ \hat V = 0.861 \ m^3/kg }[/tex]

(b) Mass will remain constant so on doubling the volume, specific volume will also be doubled i.e.

[tex]$ \mathrm{ \hat V_2 = 2\hat V_1 }[/tex]

Thus, specific volume increases.

(c) Since, T = constant

[tex]$ \mathrm{ P\hat V_1 = P\hat V_2}[/tex]

[tex]$ \mathrm{ \frac{P_2}{P_1} = \frac{\hat V_1 }{\hat V_2 } }[/tex]

[tex]$ \mathrm{ \frac{P_2}{P_1} = \frac{\hat V_1 }{2\hat V_1 } }[/tex]

[tex]$ \mathrm{ \frac{P_2}{P_1} = \frac{1 }{2 } }[/tex]

[tex]$ \mathrm{ P_2= \frac{1}{2} \times 100}[/tex]

[tex]$ \mathrm{ P_2=50}[/tex]

Thus pressure decrease in this case.

Learn more about specific volume

https://brainly.com/question/1463418

#SPJ4

Complete question:

Bear spread was correct!.

A bear put spread is made up of one long put and one short put with a higher strike price. Both put options have the same underlying stock and expiration date. A bear put spread is constructed for a net negative (or net cost) and gains as the price of the underlying stock falls. Bear may earn from being correct by selling short stocks or ETFs in the market.

This entails borrowing shares and then selling them in the hopes of buying them again at a reduced price and returning the shares to the lender. Inverse ETFs and mutual funds are also available, which increase when markets fall.The bear call spread makes the most money when the underlying price falls.

To learn more about  bear spread  to refer:

https://brainly.com/question/20314141

#SPJ1

A unit vector perpendicular to a given vector is a vector of the same length but with a direction that is 90 degrees to the given vector. Geometrically, the collection of all such vectors forms a circle.

What is vector?
Vector is a mathematical object used to represent magnitude and direction. It is composed of a magnitude and a direction that can be represented in Euclidean space by an ordered pair of numbers. A vector can also be represented by a directed line segment to indicate the direction of the vector and its magnitude. Vectors can be used to represent many physical quantities such as velocity, force, acceleration, and electric and magnetic fields. Vectors are also used in calculus to represent derivatives of functions, enabling us to calculate the rate of change of the function.

To learn more about vector
https://brainly.com/question/626479

#SPJ4

When calculating the scalar and vector products, the angle between the vectors is taken into account. The dot product and inner product are other names for the scalar product.

In physics, a vector is a quantity with both direction and magnitude. It is often represented by such an arrow whose length was proportional to the size of the number and whose orientation is identical to that of the quantity. In science, anything with also a path and a magnitude is referred to as a vector. They are typically represented by pointing lines, each length of which denotes the size of the vector.

Scalar quantities can be described by their size or magnitude alone and do not require any other information. So, 10 cm, 50 seconds, and 7 litres.

To know more about Vector visit :

https://brainly.com/question/29740341

#SPJ4

Babies learn to concentrate their eyesight, stretch out, explore, and learn about the world around them during their first year. Cognitive development, often known as brain development, refers to the process of acquiring memory, language, thinking, and reasoning.

The period of infancy is critical for brain development.  Children who do not have a healthy first attachment are less likely to grow up to be happy, independent, and resilient individuals.

One of the primary causes is the rapid growth of the brain beginning before birth and continuing throughout early life.

Learn more about gravity and stability

https://brainly.com/question/14214231

#SPJ4

These energy between the various temperature units are accurately represented by formulae in Degrees Celsius = (9/5 x Degrees Fahrenheit) + 32

The Formula for Converting Temperature We employ the same conversion formulas found in the majority of textbooks. To convert temperatures from degrees Fahrenheit to degrees Celsius, multiply the result by.5556 (or 5/9) after subtracting 32. When converting from celsius to Degrees, multiply the result by 1.8 (about 9/5) then by 32.

The formula for converting degrees Celsius to degree Fahrenheit, which would be given by the equation F=95(C)+32, must be used in this situation. Therefore, we must divide the stated temperature by nine, multiply it.

To know more about energy visit :

https://brainly.com/question/1932868

#SPJ4