At the movie theatre, child admission is $5.40 and adult admission is $9.50. On Wednesday, 146 tickets were sold for a total sales of $1001.60. How many adult tickets were sold that day?

Answers

Answer 1

Answer:

52 adult tickets

Step-by-step explanation:

We can write a system of equations to solve this:

Let x represent child tickets and y represent adult tickets.

x+y=146

5.4x+9.5y=1001.6

Solve for y in the first equation:

x+y=146

subtract x from both sides

y=146-x

Substitute this into the second equation:

5.4x+9.5(146-x)=1001.6

simplify

5.4x+1387-9.5x=1001.6

combine like terms

-4.1x + 1387=1001.6

subtract 1387 from both sides

-4.1x=-385.4

divide both sides by -4.1

x=94

Next, plug in this into the first equation and solve for y (adult tickets).

94+y=146

subtract 94 from both sides

y=52

So, 52 adult tickets were sold that day.

Hope this helps! :)


Related Questions

3.6.3 Test (CST): Posttest: Polynomials
Question 4 of 10
Which expression is equivalent to m³? Assume that the
35m6
denominator does not equal zero.
A. 1/5m²
B. 1/5m³
C. 5m3
D. 5m²

Answers

Polynomials are algebraic expressions that involve the sum of power functions. Monomials are the simplest type of polynomial and are used to describe terms with a single term, such as 5m².

A monomial is a polynomial consisting of only one term, and it may be a constant, variable, or a product of a constant and a variable. The degree of a monomial is determined by the exponent of the variable.

In this case, 5m² has a degree of 2 because the exponent of m is 2. When it comes to multiplication and division of monomials,

the rules for powers apply. When multiplying monomials with the same base, we add the exponents; for example, (2m) (3m²) = 6m³.

In terms of dividing monomials, we subtract the exponent of the denominator from the exponent of the numerator; for example, (3m²) / (2m) = 1.5m.

To learn more about : Polynomials

https://brainly.com/question/4142886

#SPJ8

Let X₁, X₂,... be a sequence of random variables that converges in probability to a constant a. Assume that P(X; > 0) = 1 for all i. √X₁ and Y = a/X; converge in prob- (a) Verify that the sequences defined by Y₁ ability. = (b) Use the results in part (a) to prove the fact used in Example 5.5.18, that σ/Sn converges in probability to 1.

Answers

a) We can conclude that Y_n converges in probability to a/X.

b) Using the results of part (a), we know that Z_i/1 converges in probability to 1.

Given X₁, X₂,... be a sequence of random variables that converges in probability to a constant a.

Assume that P(X; > 0) = 1 for all i. √X₁ and Y = a/X; converge in probability.

(a) To verify the sequences defined by Y₁, Y₂,...converge in probability, we use the following theorem:

If Xn → X in probability, and g is a continuous function,

then g(Xn) → g(X) in probability, provided that g is bounded.

Let Yn = a/Xn.

Then we have,

Yn = a/Xn = g(Xn),

where g(x) = a/x.

We note that g is a continuous function and it is also bounded (since P(X; > 0) = 1).

By the theorem, Yn = a/Xn converges in probability to a/X when Xn converges in probability to a.

(b) We know that σ² = E[(X₁ - μ)²] = Var(X₁).

We also have that Sn is the sum of the first n random variables, i.e. Sn = X₁ + X₂ + ... + Xn.

Hence,σ²(Sn) = Var(X₁ + X₂ + ... + Xn) = ∑ Var(Xi), where the sum is over i = 1 to n.

Here, we use the property that the variance of the sum of independent random variables is the sum of the variances.Now,σ(Sn) = √(σ²(Sn)) = √(∑ Var(Xi))

Hence,σ(Sn)/√n = √(∑ Var(Xi)/n)Since Xn converges in probability to a, we have that Xn - a → 0 in probability.

This implies that (Xn - a)² → 0 in probability.

Now,σ² = Var(X₁) = E[(X₁ - a)²] = E[X₁² - 2aX₁ + a²] = E[X₁²] - 2aE[X₁] + a²We know that E[X₁] = a, and we also have that E[X₁²] exists (since X₁ is positive and the first moment E[X₁] exists).

Therefore,σ² = Var(X₁) = E[X₁²] - a²Hence,σ(Sn)/√n = √(∑ Var(Xi)/n) = √(nσ²/n) = σThus, we have that σ(Sn)/√n → σ, since σ is a constant.

Therefore, σ(Sn)/√n converges in probability to 1.

To know more about converges in probability , please click here:
https://brainly.com/question/32682488

#SPJ11

A rectangular field is enclosed by 400 m of fence. What is the maximum area? Draw a diagram and label the dimensions. Reminder: Your formula sheet has formulas for area and perimeter.

Answers

A rectangular field is to be enclosed by 400 m of fencing. The objective is to determine the maximum area of the rectangular field. We are also required to draw a diagram and label the dimensions.

The maximum area of a rectangle is achieved when the rectangle is a square. The rectangular field is enclosed by 400 m of fencing, thus its perimeter will be 400m. If ‘l’ represents the length and ‘b’ represents the breadth of the rectangular field, then the perimeter of the rectangular field can be expressed as 2l + 2b = 400mOrl + b = 200mFrom this equation, we can deduce that the length l = 200m - b.

Now, the area A of the rectangular field is given by A = lb.

Substituting l = 200m - b into the above expression, we have;

A = b(200m - b)

Differentiating A with respect to b, we have;

dA/db = 200m - 2bThe area is maximum when dA/db = 0.

Thus, we have;200m - 2b = 0Or2b = 200mSo, b = 100m.

Thus the breadth is 100m and the length l = 200m - b = 100m.

Therefore, the maximum area is given by;A = lb = 100m × 100m = 10000 sq. m

The maximum area of the rectangular field is 10000 sq. m.

To know more about rectangular visit :

https://brainly.com/question/32444543

#SPJ11

If F = (y² + z² − x²)i + (z² + x² − y²)j + (x² + y² − z²)k, then evaluate, SS V × F · n dA integrated over the portion of the surface x² + y² − 4x + 2z = 0 above the plane z = 0 and verify the Stroke's Theorem. n is the unit vector normal to the surface.

Answers

Answer:

The specific vector field F is not provided in the question, making it impossible to proceed further with the calculations and verification of Stoke's Theorem.

Step-by-step explanation:

To evaluate the surface integral, let's break down the given problem step by step.

Step 1: Find the unit normal vector n to the surface:

The given surface is x² + y² − 4x + 2z = 0. We can rewrite it as:

(x - 2)² + y² + z² = 4

Comparing this to the standard equation of a sphere (x - a)² + (y - b)² + (z - c)² = r², we can see that the center of the sphere is (2, 0, 0) and the radius is 2. Hence, the unit normal vector n is (1/2, 0, 0).

Step 2: Calculate the surface area element dA:

Since the given surface is defined implicitly, we can find the surface area element dA using the formula:

dA = |∇F| dS

Here, ∇F denotes the gradient of F, and |∇F| represents its magnitude.

∇F = (∂F/∂x)i + (∂F/∂y)j + (∂F/∂z)k

    = (-2x)i + (-2y)j + (-2z)k

|∇F| = √((-2x)² + (-2y)² + (-2z)²)

     = 2√(x² + y² + z²)

Therefore, dA = 2√(x² + y² + z²) dS

Step 3: Evaluate the dot product SS V × F · n:

The cross product V × F is given by:

V × F = (1, 0, 0) × (y² + z² − x², z² + x² − y², x² + y² − z²)

      = (-(y² + z² − x²), -(z² + x² − y²), x² + y² − z²)

      = (x² - y² - z², -x² + y² - z², x² + y² - z²)

Taking the dot product of V × F with n:

(V × F) · n = (x² - y² - z²) * (1/2)

           = (x² - y² - z²) / 2

Step 4: Set up the integral:

We need to integrate (V × F) · n dA over the portion of the surface x² + y² − 4x + 2z = 0 above the plane z = 0.

Converting to cylindrical coordinates, we have:

x = r cosθ

y = r sinθ

z = z

The bounds for r and θ can be determined by analyzing the given surface equation. We have:

x² + y² − 4x + 2z = 0

r² - 4rcosθ + 2z = 0

Solving for r, we get:

r = 2cosθ ± √(4cos²θ - 2z)

To restrict the region above the plane z = 0, we take the positive square root:

r = 2cosθ + √(4cos²θ - 2z)

The bounds for θ are 0 to 2π, and for z, it is 0 to √(4cos²θ).

Therefore, the integral becomes:

∫∫(V × F) · n * 2√(x² + y²

+ z²) r dr dθ

over the region: 0 ≤ θ ≤ 2π, 0 ≤ r ≤ 2cosθ + √(4cos²θ - 2z), 0 ≤ z ≤ √(4cos²θ)

Step 5: Verify Stoke's Theorem:

To verify Stoke's Theorem, we can calculate the flux of the curl of F across the boundary curve and compare it to the value obtained from the surface integral.

The boundary curve is the intersection of the given surface x² + y² − 4x + 2z = 0 and the plane z = 0.

Setting z = 0 in the surface equation, we have:

x² + y² − 4x = 0

(x - 2)² + y² = 4

This represents a circle centered at (2, 0) with a radius of 2.

We can calculate the flux of the curl of F across this circular boundary using Stoke's Theorem and compare it to the value obtained from the surface integral.

Unfortunately, the specific vector field F is not provided in the question, making it impossible to proceed further with the calculations and verification of Stoke's Theorem.

Learn more about stokes theorem:https://brainly.com/question/28381095

#SPJ11

Please help fast urgent request!

Answers

Answer:

14.5

Step-by-step explanation:

If a line of best fit has a negative slope, what can be inferred about the relationship between the two quantities represented by the line

Answers

If a line of best fit has a negative slope, it implies that as the value of one quantity increases, the other quantity will decrease, and vice versa.

If a line of best fit has a negative slope, it can be inferred that there is a negative correlation between the two quantities represented by the line. A negative correlation means that as one variable increases, the other variable decreases.

For example, consider a scatter plot representing the relationship between the hours of studying and the grades of a group of students. If a line of best fit is drawn on the plot and has a negative slope,

it suggests that students who study more hours tend to earn lower grades, and those who study less tend to earn higher grades.This inference is particularly useful in statistical analysis to evaluate the strength of the relationship between two variables.

By determining the slope of the line of best fit, we can infer whether the two variables have a positive, negative, or no correlation. A line with a negative slope indicates a negative correlation between the two quantities represented by the line.

To learn more about : line

https://brainly.com/question/24644930

#SPJ8

Find the angle of elevation of the sun from the ground when a
tree that is 13 ft tall casts a shadow 16 ft long. Round to the
nearest degree.
Find the angle of elevation of the sun from the ground when a tree that is \( 13 \mathrm{ft} \) tall casts a shadow \( 16 \mathrm{ft} \) long. Round to the nearest degree.

Answers

Given that a tree that is 13 ft tall casts a shadow 16 ft long.The angle of elevation of the sun from the ground can be found using trigonometry.

Since, the tree and its shadow represent the height and base of the right angled triangle respectively, we can use the tangent ratio to find the angle of elevation of the sun from the ground.

tan(θ) = Opposite / Adjacenttan(θ) = 13 / 16θ = tan^-1(13 / 16)θ = 40.2° (rounded to the nearest degree)Therefore, the angle of elevation of the sun from the ground is approximately 40°.

To know more about ground visit:

https://brainly.com/question/14795229

#SPJ11

Question 4 If 3 = 87°, y = 67°, c = 10.72, find all unknown side lengths and angle measures. Round to the nearest hundredth for side lengths and angles, as needed. b C a

Answers

To find the remaining side lengths and angle measures, we can apply trigonometric ratios and the laws of triangles.

Using the Law of Sines, we can find the ratios of side lengths to their corresponding angles. Let's denote the unknown side lengths as a and b.

sin(A)/a = sin(B)/b = sin(C)/c

Using the known values, we can set up the following equations:

sin(67°)/a = sin(87°)/b = sin(26°)/10.72

Solving these equations, we can find the values of a and b. To find the remaining angle measure, A, we can use the fact that the sum of angles in a triangle is 180°:

A = 180° - B - C

With these calculations, we can determine all the unknown side lengths and angle measures of the triangle.

For more information on angles visit: brainly.com/question/24274004

#SPJ11

The cost C (in dollars) of manufacturing a number of high-quality computer laser printers is C(x) = 15x4/3 + 15x2/3 + 650,000 Currently, the level of production is 729 printers and that level is increasing at the rate of 300 printers per month. Find the rate at which the cost is increasing each month. The cost is increasing at about $ per month TIP Enter your answer as an integer or decimal number. Examples: 3,-4,5.5172 Enter DNE for Does Not Exist, oo for Infinity Get Help: Video eBook

Answers

the cost is increasing at a rate of approximately $57,141.646 per month.

To find the rate at which the cost is increasing each month, we need to calculate the derivative of the cost function C(x) with respect to time.

Given that the level of production is increasing at a rate of 300 printers per month, we can express the rate of change of production with respect to time as dx/dt = 300 printers/month.

Now, let's differentiate the cost function C(x) with respect to x to find the rate at which the cost is increasing with respect to x:

dC/dx = d/dx [tex](15x^{(4/3)} + 15x^{(2/3)}[/tex] + 650,000)

Using the power rule of differentiation, we can find the derivative of each term:

dC/dx = 15 * (4/3) * [tex]x^{(1/3)} + 15 * (2/3) * x^{(-1/3)}[/tex] + 0

Simplifying the derivative, we have:

dC/dx = [tex]20x^{(1/3)} + 10x^{(-1/3)}[/tex]

Now, we can multiply this derivative by the rate of change of production to find the rate at which the cost is increasing each month:

dC/dt = ([tex]20x^{(1/3)} + 10x^{(-1/3)}[/tex]) * dx/dt

Substituting the given values, x = 729 printers and dx/dt = 300 printers/month, we have:

dC/dt = ([tex]20(729)^{(1/3)} + 10(729)^{(-1/3)}[/tex]) * 300

Evaluating this expression, we find:

dC/dt ≈ 57,141.646

To know more about function visit:

brainly.com/question/30721594

#SPJ11

Convert the polar equation to a rectangular equation. \[ r=\frac{t 1}{1-\cos 0} \] Simplify the rectangular equakion by moving all of the terms to the ief side of the equation, and combining like term

Answers

The simplified rectangular equation for the given expression is x² + y² - t² / [1 - 2cos(θ)(1 - cos(θ))] = 0

Given polar equation is `r = t/(1-cos(θ))`

We need to convert the given polar equation into a rectangular equation using the following formulas:

x = rcos(θ)

y = rsin(θ)

r² = x² + y²

x² + y² = (rcos(θ))² + (rsin(θ))²

On substituting the value of r from the given polar equation, we get:

r = t/(1-cos(θ)) x² + y² = [(t/(1-cos(θ)))cos(θ)]² + [(t/(1-cos(θ)))sin(θ)]²

x² + y² = t² / (1 - 2cos(θ) + cos²(θ) + sin²(θ) - 2cos(θ) + cos²(θ))

x² + y² = t² / (1 - 2cos(θ) + 2cos²(θ))x² + y² = t² / [1 - 2cos(θ)(1 - cos(θ))]

Now we can simplify the rectangular equation by moving all of the terms to the left side of the equation and combining like terms.

x² + y² - t² / [1 - 2cos(θ)(1 - cos(θ))] = 0

This is the required rectangular equation of the given polar equation. Hence, the main answer isx² + y² - t² / [1 - 2cos(θ)(1 - cos(θ))] = 0.

Therefore, the simplified rectangular equation is x² + y² - t² / [1 - 2cos(θ)(1 - cos(θ))] = 0.

To know more about polar equation visit:

brainly.com/question/29083133

#SPJ11

a company wants to study the effectiveness of a new pain relief medicine. they recruit 100 100100 volunteers with chronic pain. each subject takes the new pain relief medicine for a 2 22-week period, and a placebo for another 2 22-week period. subjects don't know which pill is the actual medicine, and the order of the pills is randomly assigned for each subject. researchers will measure the difference in the overall pain level for each subject. what type of experiment design is this?

Answers

The described experiment design is a randomized controlled trial (RCT) with a double-blind setup, where participants with chronic pain are randomly assigned to receive either the new pain relief medicine or a placebo, and the order of the treatments is also randomly assigned.

In an RCT, participants are randomly assigned to different groups to receive different interventions or treatments.

In this case, the volunteers with chronic pain are randomly assigned to two groups: one group receives the new pain relief medicine for a 2-week period, followed by a placebo for another 2-week period, while the other group receives the placebo first and then the pain relief medicine.

The random assignment helps minimize selection bias and ensures that any differences observed between the groups can be attributed to the treatments rather than other factors.

Furthermore, the fact that the participants do not know which pill they are taking adds a double-blind element to the experiment. This means that neither the participants nor the researchers assessing the outcomes are aware of the treatment assignment, reducing potential bias in reporting pain levels.

By measuring the difference in overall pain level before and after each treatment period, the researchers can evaluate the effectiveness of the new pain relief medicine compared to the placebo. This design allows for a direct comparison of the outcomes between the two groups, providing valuable evidence on the efficacy of the medication.

For more such question on experiment. visit :

https://brainly.com/question/25677592

#SPJ8

Is 5/42 greater than less than or equal to 10/84

Answers

Answer:

equal to

Step-by-step explanation:

5/42       10/84

5/42, if you times the faction by 2 it’ll equal to 10/42

Answer:

5/42 is equal to 10/84.

Step-by-step explanation:

To compare the fractions 5/42 and 10/84, we can simplify them to have a common denominator and then compare the numerators.

To find a common denominator, we need to determine the least common multiple (LCM) of 42 and 84, which is 84.

Now let's convert the fractions to have a denominator of 84:

5/42 = (5/42) * (2/2) = 10/84

10/84 = (10/84) * (1/1) = 10/84

Since both fractions have the same numerator and denominator, 5/42 is equal to 10/84.

Therefore, 5/42 is equal to 10/84.

(A, Simplify the expression 3x²y¹z-5r³y-3₂2 A. 15x-¹y¹z² B. 1525yz³ C. 15x²y-1₂2 D. 15x5y-13 3

Answers

The simplified expression is 15x²y - 15r³y - 9.To simplify the expression 3x²y¹z - 5r³y - 3₂2, we can combine like terms and simplify the coefficients and exponents.

The given expression consists of terms with different variables and exponents. Let's break it down and simplify each term separately.

Term 1: 3x²y¹z

The coefficient is 3, and the variables are x², y¹, and z. Since y¹ equals y, the term simplifies to 3x²yz.

Term 2: -5r³y

The coefficient is -5, and the variables are r³ and y. The term remains unchanged.

Term 3: -3₂2

The coefficient is -3, and the term has no variables. The term remains unchanged.

Combining all the simplified terms, we have:

3x²yz - 5r³y - 3₂2

To know more about simplifying algebraic expressions, refer here:

https://brainly.com/question/30200858#

#SPJ11

Use The Properbes Of Logarithms To Expand The Following Expression As Much As Possible. Simplify Any Numerical Expressions

Answers

The simplified form of the expression is 5/2.

To expand the given expression using the properties of logarithms, we'll use the following properties:

Logarithm of a product: log(a * b) = log(a) + log(b)

Logarithm of a quotient: log(a / b) = log(a) - log(b)

Logarithm of a power: log(a^b) = b * log(a)

The given expression is:

ln(√((e^3) * (e^4) / (e^2)))

Let's apply the properties:

ln(√((e^3) * (e^4) / (e^2)))

= ln(√(e^(3+4-2)))

= ln(√(e^5))

= ln(e^(5/2))

= (5/2) * ln(e)

Since ln(e) = 1, we have:

(5/2) * ln(e) = 5/2

Therefore, the simplified form of the expression is 5/2.

Learn more about  expression from

https://brainly.com/question/1859113

#SPJ11

What is the value of X?

Answers

Answer:

whatever 56/6 is. hold on rq. i think it's 9. x equals 9 x=9

(b) Find the general solution of the following 1st order ordinary differential equation. dy dx = y+1 X (5 marks)

Answers

The general solution of the given differential equation is y = ke^x - 1, where k is an arbitrary constant.

Given differential equation is: dy/dx = y+1

To find: General solution

Method to solve the differential equation:

Separation of variables method

Given differential equation is:

dy/dx = y+1

To solve the differential equation, we will use the separation of variables method which is as follows:

dy/dx = y+1

dy/(y+1) = dx

Integrating both sides, we get

ln|y+1| = x + c (where c is the constant of integration)

We can write this as:

ln|y+1| - x = c

Now, exponentiate both sides to eliminate the logarithm:

e^{ln|y+1| - x} = e^c

This gives us:

y+1 = ke^x (where k = e^c)

Therefore, the general solution of the given differential equation is y = ke^x - 1, where k is an arbitrary constant.

To know more about differential visit:

https://brainly.com/question/13958985

#SPJ11

Evaluate the expression under the given conditions. \[ \tan (\theta+\varphi) ; \cos (\theta)=-\frac{1}{3}, \theta \text { in Quadrant III, } \sin (\varphi)=\frac{1}{4}, \varphi \text { in Quadrant II

Answers

Given conditions: `cos(θ) = -1/3`, `θ` in Quadrant III, `sin(ϕ) = 1/4`, `ϕ` in Quadrant II.To evaluate the expression `tan(θ + ϕ)`, we need to use the formula for `tan(A + B)`.The formula for `tan(A + B)` is given as `tan(A + B) = (tanA + tanB) / (1 - tanA tanB)`

By comparing this formula with the given expression `tan(θ + ϕ)`, we get`A = θ` and `B = ϕ`.So, `tan(θ + ϕ) = (tanθ + tanϕ) / (1 - tanθ tanϕ)`

We are given `cos(θ) = -1/3`, `θ` in Quadrant III and `sin(ϕ) = 1/4`, `ϕ` in Quadrant II.Using the Pythagorean identity, we get `sin^2(θ) = 1 - cos^2(θ) = 1 - (1/3)^2 = 8/9`

Therefore, `sin(θ) = -√(8/9) = -2√2 / 3` (Negative since `θ` is in Quadrant III)

Similarly, using the Pythagorean identity, we get `cos^2(ϕ) = 1 - sin^2(ϕ) = 1 - (1/4)^2 = 15/16`Therefore, `cos(ϕ) = -√(15/16) = -√15 / 4` (Negative since `ϕ` is in Quadrant II)

We can now evaluate `tanθ` and `tanϕ`.`tanθ = sinθ / cosθ = (-2√2 / 3) / (-1/3) = 2√2`(`-1/3` is negative since `cosθ` is negative in Quadrant III)`tanϕ = sinϕ / cosϕ = (1/4) / (-√15 / 4) = -1 / (√15)`

Now, substituting `tanθ` and `tanϕ` in the formula for `tan(θ + ϕ)`, we get`tan(θ + ϕ) = (2√2 - 1/√15) / (1 - (2√2 / 3) (-1/√15))``= (2√2 - 1/√15) / (1 + (2√2 / 3√15))`

Simplifying the expression further, we get `tan(θ + ϕ) = (-8√2 + 3√15) / 13`

Therefore, `tan(θ + ϕ) = (-8√2 + 3√15) / 13` which is the final answer.

We have evaluated the expression `tan(θ + ϕ)` under the given conditions.

To know more about Pythagorean identity visit :

https://brainly.com/question/24220091

#SPJ11

For the CO2-air-water system, the total pressure is set at 1 atm and the partial pressure of CO₂ in the vapor phase is given as 0.15 atm. Calculate the number of degrees of freedom. Determine which variables can be arbitrarily set accordingly.

Answers

The CO₂-air-water system has four degrees of freedom.

In the CO₂-air-water system, understanding the number of degrees of freedom is crucial for determining the independent variables that can be arbitrarily set. This knowledge helps in analyzing and predicting the behavior of the system.

By using the given information about the total pressure and the partial pressure of CO₂ in the vapor phase, we can determine the number of degrees of freedom and identify the variables that can be freely adjusted.

The number of degrees of freedom (DOF) refers to the independent variables that can be freely chosen to describe the state of a system. In thermodynamics, the DOF represents the number of parameters required to define the thermodynamic state of a system.

For the CO₂-air-water system, we have three components: CO2, air, and water. Each component can exist in multiple phases: solid, liquid, or vapor. In this case, we are interested in the vapor phase, specifically the partial pressure of CO₂. Given that the total pressure is set at 1 atm and the partial pressure of CO₂ in the vapor phase is 0.15 atm,

we can determine the number of degrees of freedom using the phase rule equation:

F = C - P + 2

Where:

F = Number of degrees of freedom

C = Number of components

P = Number of phases

In this system, we have three components (CO₂, air, and water) and one phase (vapor).

Substituting these values into the phase rule equation:

F = 3 - 1 + 2

F = 4

Therefore, the CO₂-air-water system has four degrees of freedom.

Now, let's determine which variables can be arbitrarily set. Since we have four degrees of freedom, we can independently choose four variables. The variables that can be arbitrarily set depend on the chosen parameters to describe the system state. In this case, the commonly chosen variables are temperature (T), pressure (P), and the composition (mole fractions or mass fractions) of the components.

Given that the total pressure is fixed at 1 atm, it cannot be arbitrarily set. However, the partial pressure of CO₂ in the vapor phase, which is given as 0.15 atm, can be considered as an arbitrarily set variable. Therefore, one degree of freedom is accounted for by the partial pressure of CO₂ in the vapor phase.

This leaves us with three more degrees of freedom. These can be assigned to other variables, such as temperature, mole fractions of the components, or any other thermodynamic property that characterizes the system.

In summary, in the CO₂-air-water system, with a total pressure of 1 atm and a partial pressure of CO₂ in the vapor phase of 0.15 atm, we have four degrees of freedom. One degree of freedom is accounted for by the partial pressure of CO₂, while the remaining three degrees of freedom can be assigned to other independent variables, such as temperature, mole fractions, or other properties to describe the system state.

To know more about Thermodynamic here

https://brainly.com/question/33422249

#SPJ4

Find the area of the region lying to the right of x = 2y² - 10 and to the left of x = 134 - 2². (Use symbolic notation and fractions where needed.)

Answers

The area of the region is 2538 sq units.

The given inequality is

x = 2y² - 10 andx = 134 - 2².

Area to the right of x = 2y² - 10 and to the left of x = 134 - 2² can be found using integration.

Define f(x) as the difference between the two functions,

x = 2y² - 10 and

x = 134 - 2².

f(x) = (134 - 2²) - (2y² - 10)

= 118 - 2y²

Range of y is given by

y² ∈ [5, 33]

The range of integration is given by

∫[5, 33] f(x) dy

= ∫[5, 33] (118 - 2y²) dy

= [118y - 2(1/3)y³]∣[5, 33]

= [3894.67 - 1366.67]

= 2538 sq units.

Thus, the area of the region lying to the right of x = 2y² - 10 and to the left of x = 134 - 2² is 2538 sq units.

To know more about area visit:

https://brainly.com/question/1631786

#SPJ11

Solve the following inequalities. [K4] x−4
2x+1

> 2
x+3

Answers

The given inequality is:

\frac{x - 4}{2x + 1} > \frac{2}{x + 3}

Multiplying both sides by

(2x + 1)(x + 3),

we get:

\begin{align*}
(x - 4)(x + 3) > 2(2x + 1)\\
x^2 - x - 12 > 0\\
x^2 - 4x + 3x - 12 > 0\\
x(x - 4) + 3(x - 4) > 0\\
(x - 4)(x + 3) > 0
\end{align*}

So, the solution is:

x \in (-\infty, -3) \cup (4, \infty)

Therefore, the solution set of the given inequality is

(-\infty, -3) \cup (4, \infty).

To know more about inequality visit :

https://brainly.com/question/28823603

#SPJ11

Find the equation of the tangent line to the curve defined by \( x=t^{4}-9 t^{2}, y=t^{2}-6 t+7 \) at the point \( (0,-2) \).

Answers

The equation of the tangent line to the curve at the point (0, -2) is y = -6x - 2.

To find the equation of the tangent line, we need to find the slope of the curve at the given point and then use the point-slope form of a line.

First, let's find the derivatives of x and y with respect to t:

dx/dt = 4t³ - 18t

dy/dt = 2t - 6

Now, substitute t = 0 into the derivatives to find the slope of the tangent line at the point (0, -2):

dx/dt = 4(0)³ - 18(0) = 0

dy/dt = 2(0) - 6 = -6

So, the slope of the tangent line is -6.

Next, we use the point-slope form of a line:

y - y₁ = m(x - x₁)

Substituting the coordinates of the given point (0, -2) and the slope -6:

y - (-2) = -6(x - 0)

y + 2 = -6x

Simplifying the equation, we get:

y = -6x - 2

To know more about tangent line:

https://brainly.com/question/31617205

#SPJ4

Find The Volume Of The Solid Obtained When The Region Enclosed By : Y=X1y=3 And X=2 Is Revolved About The Line X=2 Π∫213(2−Y1)2⋅Dyπ∫312(2)2−(X1)2dxπ∫213(2)2−(Y1)2dyπ∫312(2−X1)2⋅

Answers

The volume of the solid obtained when the region enclosed by y = x^3, y = 3, and x = 2 is revolved about the line x = 2 is 2π [(64/5) - 16] cubic units.

To find the volume of the solid obtained by revolving the region enclosed by the curves y = x^3, y = 3, and x = 2 about the line x = 2, we can use the method of cylindrical shells.

The volume can be calculated using the integral ∫(2πy)(x-2) dx over the interval [0, 2], where 2πy represents the circumference of the cylindrical shell and (x-2) represents its height.

Integrating the expression, we have:

V = ∫[0,2] (2πy)(x-2) dx

Substituting y = x^3 and integrating, we get:

V = ∫[0,2] (2πx^3)(x-2) dx

Expanding and simplifying the integrand, we have:

V = 2π ∫[0,2] (2x^4 - 4x^3) dx

Integrating term by term, we obtain:

V = 2π [ (2/5)x^5 - (4/4)x^4 ] evaluated from x = 0 to x = 2

Evaluating the integral, we find:

V = 2π [ (2/5)(2^5) - (4/4)(2^4) ]

Simplifying further, we have:

V = 2π [ (2/5)(32) - (4/4)(16) ]

V = 2π [ (64/5) - 16 ]

Hence, the volume of the solid obtained is 2π [ (64/5) - 16 ] cubic units.

Learn more about volume here:

https://brainly.com/question/28058531

#SPJ11

Y′′′−3y′′+9y′−27y=Sec3t,Y(0)=2,Y′(0)=−3,Y′′(0)=9. A Fundamental Set Of Solutions Of The Homogeneous Equation Is Giv

Answers

To find the particular solution of the given nonhomogeneous linear differential equation, we can use the method of undetermined coefficients.

The complementary equation associated with the given homogeneous equation is:

y''' - 3y'' + 9y' - 27y = 0

To find the fundamental set of solutions for the homogeneous equation, we solve the characteristic equation:

[tex]r^3 - 3r^2 + 9r - 27 = 0[/tex]

Factoring out the common factor of (r - 3), we have:

[tex](r - 3)(r^2 + 9) = 0[/tex]

Setting each factor equal to zero, we get:

r - 3 = 0   -->   r = 3

[tex]r^2 + 9 = 0 -- > r^2 = -9[/tex]

 -->   r = ±3i

So the fundamental set of solutions for the homogeneous equation is:

[tex]y1(t) = e^{(3t)}[/tex]

[tex]y2(t) = e^{(3it) }[/tex]

=[tex]e^{(3it)}[/tex]

= cos(3t) + i sin(3t)

y3(t) =[tex]e^{(3it)}[/tex]

= [tex]e^{(3it)}[/tex]

= cos(3t) - i sin(3t)

Now, let's find the particular solution using the method of undetermined coefficients.

Assuming the particular solution has the form:

yp(t) = A [tex]sec^3[/tex](t)

Taking derivatives:

yp'(t) = 3A sec(t) tan(t)

yp''(t) = 3A sec(t) tan^2(t) + 3A sec^3(t)

yp'''(t) = 3A sec(t) tan^2(t) + 9A sec^3(t) tan(t)

Substituting these derivatives into the differential equation:

yp''' - 3yp'' + 9yp' - 27yp = (3A sec(t) tan^2(t) + 9A sec^3(t) tan(t)) - 3(3A sec(t) tan^2(t) + 3A sec^3(t)) + 9(3A sec(t) tan(t)) - 27(A sec^3(t)) = sec^3(t)

Comparing the coefficients of sec^3(t) on both sides, we have:

9A - 27A = 1   -->   -18A = 1   -->   A = -1/18

Therefore, the particular solution is:

yp(t) = (-1/18) sec^3(t)

The general solution to the nonhomogeneous equation is given by the sum of the particular solution and the complementary solution:

y(t) = yp(t) + C1y1(t) + C2y2(t) + C3y3(t)

Using the initial conditions, we can determine the values of C1, C2, and C3.

Given:

y(0) = 2

y'(0) = -3

y''(0) = 9

Substituting these values into the general solution and solving the resulting system of equations will give us the specific values of C1, C2, and C3.

To know more about equation visit:

brainly.com/question/29657983

#SPJ11

The shorter leg of a 30°-60°-90° triangle measures 18
3 kilometers. What is the measure of the longer leg?
Write your answer in the simplest radical form.

Answers

The 30°-60°-90° special triangle side length relationship indicates that the length of the longer leg is 54 kilometers

What is a 30°-60°-90° special triangle?

A 30°-60°-90° triangle is a special right triangle, with the interior angles consisting of 30°, 60°, and 90°

The relationship between the legs of a 30°-60°-90° can be presented in the following form;

tan(30°) = a/b, where;

a and b are the lengths of the legs of the special 30°-60°-90°, triangle

tan(30°) = (√3)/3, therefore;

tan(30°) = a/b = (√3)/3

b/a = 3/√3 = √3, where b is the longer side of the 30°-60°-90° right triangle

b = a × √3

Therefore, the longer leg is √3 multiplied by the shorter leg

The length of the shorter leg = 18·√3 kilometers, therefore;

The length of the longer leg = 18·√3 km × √3 = 18 × 3  kilometers = 54 kilometers

Learn more on the 30°-60°-90° triangle, here: https://brainly.com/question/16393574

#SPJ1

To approximate binomial probability p(x > 8) when n is large, identify the appropriate 0.5 adjusted formula for normal approximation. O p(x >= 9) O p(x > 7.5) O p(x > 9) O p(x > 8.5)

Answers

In order to approximate the binomial probability p(x > 8) when the sample size (n) is large, we can use the normal approximation. The appropriate 0.5 adjusted formula for this approximation is p(x > 8.5).

When the sample size is large, the binomial distribution can be approximated by the normal distribution using the mean (μ) and standard deviation (σ) of the binomial distribution. For a binomial distribution with parameters n (sample size) and p (probability of success), the mean is given by μ = np and the standard deviation is given by σ = √(np(1-p)).

To find the probability p(x > 8), we can use the normal approximation and convert it into a standard normal distribution. We adjust the boundary from x > 8 to x > 8.5 by adding 0.5 to account for the continuity correction.

Using the formula for the standard normal distribution, we can calculate the z-score corresponding to x = 8.5:

z = (8.5 - μ) / σ

Next, we can look up the probability of z > (8.5 - μ) / σ in the standard normal distribution table or use a statistical calculator to find the corresponding probability.

Therefore, the appropriate 0.5 adjusted formula for the normal approximation of p(x > 8) when n is large is p(x > 8.5).

To know more about normal approximation, refer here:

https://brainly.com/question/28031631#

#SPJ11

Thickness measurements of ancient prehistoric Native American pot shards discovered in a Hopi village are approximately normally distributed, with a mean of 5.2 millimeters (mm) and a standard deviation of 0.7 mm. For a randomly found shard, find the following probabilities. (Round your answers to four decimal places.) (a) the thickness is less than 3.0 mm (b) the thickness is more than 7.0 mm (c) the thickness is between 3.0 mm and 7.0 mm

Answers

Thickness measurements of ancient prehistoric Native American pot shards discovered in a Hopi village are approximately normally distributed, with a mean of 5.2 millimeters (mm) and a standard deviation of 0.7 mm. For a randomly found shard, find the following probabilities:

(a) The probability that the thickness is less than 3.0 mm is approximately 0.0008.

(b) The probability that the thickness is more than 7.0 mm is approximately 0.0053.

(c) The probability that the thickness is between 3.0 mm and 7.0 mm is approximately 0.0045.

(a) To find the probability that the thickness is less than 3.0 mm, we need to calculate the z-score and find the area under the normal distribution curve to the left of the z-score.

Calculating the z-score:

z = (x - μ) / σ

z = (3.0 - 5.2) / 0.7

z ≈ -3.14

Using a standard normal distribution table or calculator, we find that the area to the left of -3.14 is approximately 0.0008.

Therefore, the probability that the thickness is less than 3.0 mm is approximately 0.0008.

(b) To find the probability that the thickness is more than 7.0 mm, we need to calculate the z-score and find the area under the normal distribution curve to the right of the z-score.

Calculating the z-score:

z = (x - μ) / σ

z = (7.0 - 5.2) / 0.7

z ≈ 2.57

Using a standard normal distribution table or calculator, we find that the area to the right of 2.57 is approximately 0.0053.

Therefore, the probability that the thickness is more than 7.0 mm is approximately 0.0053.

(c) To find the probability that the thickness is between 3.0 mm and 7.0 mm, we need to calculate the z-scores for both values and find the area between the z-scores under the normal distribution curve.

Calculating the z-score for 3.0 mm:

z1 = (x1 - μ) / σ

z1 = (3.0 - 5.2) / 0.7

z1 ≈ -3.14

Calculating the z-score for 7.0 mm:

z2 = (x2 - μ) / σ

z2 = (7.0 - 5.2) / 0.7

z2 ≈ 2.57

Using a standard normal distribution table or calculator, we find the area to the left of -3.14 as approximately 0.0008 and the area to the right of 2.57 as approximately 0.0053.

The probability that the thickness is between 3.0 mm and 7.0 mm is the difference between these two probabilities:

P(3.0 mm < thickness < 7.0 mm) = 0.0053 - 0.0008

P(3.0 mm < thickness < 7.0 mm) ≈ 0.0045

Therefore, the probability that the thickness is between 3.0 mm and 7.0 mm is approximately 0.0045.

To know more about the standard deviation refer here,

https://brainly.com/question/13498201#

#SPJ11

help pls!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Answers

It would take more than 291 hours (or approximately 12 days) for everyone to get a picture, assuming they all took the full allotted time of 15 seconds.

This is because 70,000 people multiplied by 15 seconds per picture equals 1,050,000 seconds in total.

1,050,000 seconds is equal to approximately 17,500 minutes, or 291.67 hours.

In other words, it would take more than 291 hours (or approximately 12 days) for everyone to get a picture, assuming they all took the full allotted time of 15 seconds.

However, it is important to note that this is an estimate and there are other factors to consider.

For example, not everyone may want to take a picture, some people may take longer or shorter than 15 seconds, and there may be logistical factors such as crowd control and organization that could impact the time it takes for everyone to get a picture.

For more questions on hours

https://brainly.com/question/10929133

#SPJ8

Find the particular solution determined by the initial condition. \[ f^{\prime}(x)=3 x^{2 / 3}-2 x ; f(1)=-7 \] \[ f(x)= \]

Answers

Given\[ f^{\prime}(x)=3 x^{2 / 3}-2 x ;

f(1)=-7 \]

Now integrating both sides of the equation we havef'(x) = (dy/dx)=3x^(2/3)-2x.

Integrating both sides wrt x, we getf(x) = ∫ (3x^(2/3) - 2x) dxThis gives usf(x) = 3∫x^(2/3)dx - 2∫xdx Putting the values, we getf(x) = 3(3/5)x^(5/3) - 2(x^2/2) + CF(x) = 9/5 x^(5/3) - x^2 + CTo find C, we use the given value of f(1) = -7-7 = 9/5 - 1 + C-7 = 4/5 + C⇒ C = -39/5.

Hence, the solution off

(x) = 9/5 x^(5/3) - x^2 - 39/5

Thus,

f(x) = 9/5 x^(5/3) - x^2 - 39/5

is the required particular solution.

To know more about integrating visit :

https://brainly.com/question/30145972

#SPJ11

Suppose that historically, 53.5% of residents in an apartment building own at least one pet. What is the probability that in a random sample of 260 residents in the apartment, between 49.602490% and 59.964917% own at least one pet? P(0.4960249

Answers

The probability that between 49.602490% and 59.964917% of the residents in an apartment building own at least one pet can be calculated using the binomial distribution.

To calculate this probability, we need to find the cumulative probability from 49.602490% to 59.964917% in a sample of 260 residents. This involves calculating the probability of each possible outcome within this range and summing them up.

Let's break down the steps to calculate this probability:

1. Convert the given percentages into decimal form:

  - Lower bound: 49.602490% = 0.4960249

  - Upper bound: 59.964917% = 0.59964917

2. Determine the number of successes within the range for each possible outcome from 0 to 260 residents owning pets.

3. Calculate the probability of each outcome using the binomial distribution formula:

  P(X = k) = (n choose k) * p^k * (1 - p)^(n - k),

  where n is the sample size (260), k is the number of successes within the range, and p is the probability of success (0.535).

4. Sum up the probabilities for all the outcomes within the range.

Using this approach, we can calculate the probability that between 49.602490% and 59.964917% of the residents own at least one pet in the random sample of 260 residents.

To know more about the binomial distribution, refer here:

https://brainly.com/question/29137961#

#SPJ11

A simply supported beam 10 m long carries a uniformly distributed load of 24 kN/m over its entire span. E = 200 GPa, and I = 240 x 106 mm4. Compute the deflection at a point 4 m from the left support. Select one: a. 44 mm b. 75 mm c. 62 mm d. 58 mm

Answers

The deflection at a point 4 m from the left support of the simply supported beam is 44 mm.

To compute the deflection at a point 4 m from the left support of a simply supported beam, we can use the formula for deflection due to a uniformly distributed load.

First, let's calculate the value of the load acting on the beam. The uniformly distributed load of 24 kN/m is applied over the entire span of 10 m, so the total load can be found by multiplying the load per meter by the length of the beam:

Total load = 24 kN/m * 10 m = 240 kN

Next, we need to calculate the bending moment at the point 4 m from the left support. The bending moment can be determined using the formula:

Bending moment = (load per unit length * length^2) / 2

Bending moment = (24 kN/m * (4 m)^2) / 2 = 192 kNm

Now, we can calculate the deflection at the point using the formula for deflection due to bending:

Deflection = (5 * load * distance^4) / (384 * E * I)

where E is the modulus of elasticity and I is the moment of inertia of the beam.

Plugging in the values, we get:

Deflection = (5 * 240 kN * (4 m)^4) / (384 * 200 GPa * 240 * 10^6 mm^4)

Simplifying the units, we have:

Deflection = (5 * 240 * 10^3 N * (4 * 10^3 mm)^4) / (384 * 200 * 10^9 N/mm^2 * 240 * 10^6 mm^4)

Deflection = (5 * 240 * 10^3 * 4^4) / (384 * 200 * 240 * 10^9)

Deflection = 44 mm

Therefore, the deflection at a point 4 m from the left support of the simply supported beam is 44 mm.

Know more about deflection:

https://brainly.com/question/31967662

#SPJ11

Other Questions
Katerina wants to accumulate $40,000 in an RSP by makingcontributions of $300 at the beginning of each month. I interest is3 5% compoundedquarterly, calculate how many years she must makecontribut What are the stylistic characteristics of a typical Cycladic idol? Which evidence from the story most suggests that the narrator has astrong sense of integrity?He jokes affectionately with the members of his team.He respects Coach Fuller for his admirable reputation.O He attends practice when he would prefer to stay home.O He congratulates Coburn on his starting position.1 of 3 QUESTIONS Discuss the origin of Earth's earliest granitic crust What processes were important in forming this crust? When building a house, the number of days required to build is inversely proportional to the number of workers. One house was built in 161 days by 4 workers. How many days would it take to build a similar house with 46 workers? Consider a futures contract on a stock index. Suppose that the current index level is 1,783, the four-month index futures level is 1,815, the dividend yield on the index is 2.5%. The implied repo rate is: O 0.178% O 7.836% 9.468% 2.836% Problem 5-46 (LO. 8) On June 5, 2020, Leo purchased and placed in service a new car that cost $75,000. The business use percentage for the car is always 100%. Leo does not claim any available additional first-year depreciation or any 5 179. If required, round your answers to the nearest dollar. Click here to access the depreciation table to use for this problem. Click here to access the limits for certain automobiles. a. What MACRS convention applies to the new car? Half-year b. Is the automobile considered "listed property"? Yes c. Leo's deduction in 2020 is $ and for 2021 is $ Date Placed Fourth and in Service First Year Second Year Third Year Later Years 2019-2020 $10,100 $16,100 $9,700 $5,760 2018 $10,000 $16,000 $9,600 $5,760 2012-2017 3,160 5,100 3,050 1,875 *The TCJA of 2017 significantly increased the annual limitations beginning in 2018. Because the 2021 Indexed amounts were not available when we published, the 2020 amounts are used in the Examples and end-of-chapter problem materials. Let f(x)= 81x 2At what x-values is f (x) zero or undefined? x= (If there is more than one such x-value, enter a comma-separated list; if there are no such x-values, enter "none".) On what interval(s) is f(x) increasing? f(x) is increasing for x in (If there is more than one such interval, separate them with " U ". If there is no such interval, enter "none".) On what interval(s) is f(x) decreasing? f(x) is decreasing for x in (If there is more than one such interval, separate them with " U ". If there is no such interval, enter "none".) 1. What type of stream occurs in environments with large amounts of bed load sediment such as gravel and sand?A. StraightB. MeanderingC. Braiding2. What are natural levees?A. Large, fan-shaped wedges of sediment deposited after an abrupt drop in velocity.B. Ridges of silty sediment that build up along the edges of stream channels.C. Deposits of sand or gravel along the inside of a meander.D. The thin area of land between two meanders Hospital emergency rooms across the country are experiencing shortages of doctors and nurses, and have too few beds. These constraints make it difficult to treat patients in a timely manner. University hospital in Syracus, New York, which treats approximately 58000 patients in its emergency room each year, decided to address this issue by moving into the waiting room to treat patients, similar to a MASH unit. Prior to this experiment, the mean time to treat very ill patient (as opposed to critically ill patients or those with a minor injury) entering the emergency room was 20 minutes (with standard deviation=5 minutes). During the waiting room experiment a random sample of 36 very ill patients was selected and time to treatment for each was recorded. The sample mean time was =16.1 minutes. Conduct a hypothesis test to determine whether there is any evidence to suggest the waiting room experiment reduced the mean time to treatment for very ill patients. Use alpha=0.05. 22. A car starts from rest and accelerates uniformly for a distance of 160 m over an8. 0-second time interval. The car's acceleration is. a. 0. 05 m/sb. 0. 05 m/s/sc. 5 m/s/sd. 20 m/se. 20 m/s/s (8 points) Consider the conditional proposition: If 1 + 2 what is primary socialization? please solve!The principal P is borrowed at a simple interest rate r for a period of time t. Find the simple interest owed for the use of the money. Assume there are 360 days in a year. P=$5000, r=6.0%, t= 15 mont What is the Food Marketing System?What were two recent shocks to the U.S Food Marketing System? List one example of an agricultural product that was severely affected by them and how the marketing firms down in the supply chain had to adapt. (Hint: WSJ articles are a good source to help answer this question).How would large and small farms benefit from agricultural policy? Are there different objectives for each group? Which ones?What is market structure? Or how is it defined?Under perfect competition, producers maximize profits at the point where price equals marginal cost (P=MC). Explain this condition intuitively. F) What is Agricultural Marketing? Which of the following *is not* a quantity used to summarize a distribution? Scale Location Mean Covariance Question 17 Say that you have two statistical distributions. Both are normally distributed. The first distribution has a mean of 0 and a standard deviation of 2. The second distribution has a mean of 1 and a standard deviation of 1. Which distribution should generate observations with a higher value most of the time? The first distributionboth should be equal Impossible to tellThe second distribution The data given to the right includes data from 41 candies, and 10 of them are red. The company that makes the candy claims that 30% of its candies are red. Use the sample data to construct a 90% confidence interval estimate of the percentage of red candies. What do you conclude about the claim of 30%?Part 1Construct a90%confidence interval estimate of the population percentage of candies that are red.enter your response here%(Type an integer or decimal rounded to one decimal place as needed.)Red Blue Brown Green Yellow0.863 0.918 0.869 0.888 0.9990.795 0.896 0.786 0.848 0.8820.846 0.854 0.731 0.828 0.9410.992 0.767 0.879 0.955 0.8230.832 0.891 0.966 0.777 0.8360.711 0.754 0.749 0.971 0.7240.725 0.992 0.839 0.7510.737 0.7390.902 0.9130.758 0.8610.851 Suppose x has a distribution with = 84 and = 8. DETAILS Need Help? (a) If random samples of size n = 16 are selected, can we say anything about the X distribution of sample means? O Yes, the x distribution is normal with mean O Yes, the x distribution is normal with mean O Yes, the x distribution is normal with mean O No, the sample size is too small. During industrialization, what were the attitudes toward the use of enslaved labor? Calls for the abolition of slavery increased. Even more enslaved persons were put to work in factories. Factory owners refused to use enslaved persons as their workers. Runaway enslaved persons were not prosecuted. tickets to a local movie were sold at $3.00 for adults and $1.50 for students. if 260 tickets were sold for a total of 495.00, how many student tickets were sold?