The speed of the car is 28.0 m/s
What is speed?An object's speed, also known as "v," is the amount by which its position changes over time or by how much it changes per unit of time, making it a scalar number.The instantaneous speed is the upper limit of the average speed as the duration of the time interval approaches zero. The average speed of an item in a period of time is equal to the distance travelled by the object divided by the duration of the period. Velocity and speed are not the same thing.Given,
mass of car(m) = 600 kg
radius of circular track (r) = 100 m
Time (t) = 36 seconds
[tex]speed=\frac{distance}{time} \\\\=\frac{2*pi*r}{t} \\\\=\frac{2*3.14*160}{36}\\\\28.0 m/s[/tex]
Therefore, the speed of the car is 28.0 m/s
To learn more about speed, refer to
https://brainly.com/question/4931057
#SPJ1
if this resolving power is diffraction-limited, to what effective diameter of your eye's optical system does this correspond? use rayleigh's criterion and assume that the wavelength of the light is 560 nm
The effective diameter of your eye's optical system is 2.33 mm.
According to Rayleigh criterion, angular resolution of eye is given by the expression,
Angular resolution = 1.22 λ / D
where, λ is the wavelength of light
D is the diameter of the eye
Angular resolution in degrees = 1.67 * 10⁻² (convert to radians)
⇒ 1.67 * 10⁻² *π / 180 radian = 29.13 × 10⁻⁵ radian
λ = 560 * 10⁻⁹ m
Let us substitute the values in the above expression,
29.13 × 10⁻⁵ = 1.22* 560 * 10⁻⁹/ D
D = 1.22* 560 * 10⁻⁹/(29.13 × 10⁻⁵) = 1.22* 56* 10⁻⁸ *10⁵/29.3 = 2.33* 10⁻³ m = 2.33 mm
Thus, the effective diameter of your eye's optical system is 2.33 mm.
To know more about diameter:
https://brainly.com/question/13258146
#SPJ4
a 100 000-lb freight car is drawn 2500 ft up along a 1.2% slope at constant speed. a) find the work done against gravity. b) if a constant frictional fo
The work done against gravity is 34563738.59 Joule.
Scientifically work done components will be given as, W = F × d. In this situation, the force exerted on the block is constant, but the course of force and the path of displacement stimulated by way of this pressure are exceptional. Force F reacts at a perspective θ to the displacement d.To express this concept mathematically, the work W is the same as the pressure f instances of the distance d or W = fd. If the pressure is being exerted at an attitude θ to the displacement, the work finished is W = FD cos θ.
If pressure is implemented on a system and the system studies a displacement then the work is said to be done at the gadget. If a gadget applies a force on something else and reasons displacement then the painting is said to be finished through the device.
Calculation:-
work done = force × displacement
= ma × 2500 ft
= 45359.237 kg × 762 meter
= 34563738.59 Joule.
Learn more about work done here:-https://brainly.com/question/25573309
#SPJ4
Not Physics : What happens to infrared radiation released by the Earth if there is an increased level of carbon dioxide in the atmosphere? A.It is absorbed and heats the atmosphere.
B.It is converted to solar energy. C.It is converted to carbon dioxide.
D.It escapes and cools the atmosphere.
Give an Honest answer?!
If infrared radiation is released by the Earth and there is an increased level of carbon dioxide in the atmosphere, then it is absorbed and heats the atmosphere (option A).
What are greenhouse gases?Greenhouse gases such as carbon dioxide and methane are well known to increase global warming because they trap the radiation that otherwise will be dissipated from the atmosphere to space.
Therefore, with this data, we can see that greenhouse gases are associated with global warming and it is the reason for which the dramatic increase in carbon dioxide levels may be dangerous.
Learn more about greenhouse gases here:
https://brainly.com/question/20349818
#SPJ1
what is the answer to Alfredo, who has a mass of 60kg, jumped off a retaining wall. His kinetic energy when he landed on the ground was 882 joules. What was his gravitational potential energy when he was sitting on the wall?
Answer:
1.5m
Explanation:
i hope this helps
A lamp uses a 230v mains supply and transfers 96j of energy every second. Work out the current through the lamp. Give your answer to 1 decimal place.
The current through the lamp is 0.4A.
Calculation:-
electric powered strength = Voltage×modern-day
P = VI................Equation 1
Make I the problem of the equation
I = P/V.............Equation 2
Given: P = ninety six J/s, V = 230 V.
alternative into equation 2
I = 96/230
I = 0.4A.
His 3 predominant classes of electric lights are incandescent bulbs which produce mild through a filament this is heated to incandescence by using an electric powered current. relying on length and sort bulbs eat between 2 and 100 watts of power. traditional incandescent bulbs use 25-100W and LED bulbs use 2-18W. An incandescent bulb attracts about one hundred ten volts typically much less than 1 amp.
Learn more about The current here:- https://brainly.com/question/1100341
#SPJ4
A 2-inch piece of two-;layer chocolate cake with frosting provides 1670 kj of energy. Calculate this in calorie.
The dietary calories in 1670 kilojoules of energy are 399.14 Cal.
Solution:
Now we convert kilojoules to dietary calories
Calories in 1670 kilojoules = [tex]1670 KJ * \frac{1000J}{1kg} *\frac{1cal}{4.184J} *\frac{1 cal}{1000cal}[/tex]
Calories in 1670 kilojoules = 399.14 Cal
Hence, the dietary calories in 1670 kilojoules of energy are 399.14 Cal.
Adding filling between layers holds the layers together and adds both flavor and height to the cake. Using 12 icing-filled tipped sachets, pipe frosting just inside the outer edge of the layer. This creates a dam that prevents the filling from seeping out.
A layer cake or sandwich cake is a cake made from several stacked cake sheets bound together with icing or another type of filling such as jam or other jams. Most cake recipes can be adapted for layered cakes. Butter cakes and sponge cakes are common.
Learn more about Calorie here:-https://brainly.com/question/11460467
#SPJ4
what is the velocity v2 of the liquid flowing out of the exit end of the pipe? assume the viscosity of the fluid is negligible and the fluid is incompressible. the acceleration of gravity is 9.8 m/s 2 and patm
The fluid is incompressible and has extremely little viscosity. Gravity accelerates at a rate of 9.8 m/s2 and follows a path that causes the liquid to go out of the pipe at a speed of 66.35 m/s.
What is the principle of Bernoulli?Bernoulli's principle, which at first looks counterintuitive, describes the link between a fluid's speed and pressure. Bernoulli's principle states that locations in a horizontal flow of fluid will experience lower pressure than locations where the fluid is moving more slowly.
radius at initial end is given as = 0.24/2 = 0.12 m
now radius at end is given as = 0.05/2 = 0.025 m
utilizing the continuity equation:
A₁ V₁ = A₂ V₂
π (0.12)² × 2.88 = π (0.025)² × V₂
V₂ = 66.35 m/s
∴ The calculated exit terminal velocity is 66.35 m/s.
To know more about Bernoulli's principle, visit:
https://brainly.com/question/13098748
#SPJ4
If a wind turbine extracted 100% of the kinetic energy out of the wind, what would happen?.
Answer:
all of the wind would have to stop completely upon contact with the turbine
Explanation:
Wind turbines work by slowing down passing wind in order to extract energy. If a wind turbine was 100% efficient, then all of the wind would have to stop completely upon contact with the turbine—which isn't possible by looking at a wind turbine.
Which form of energy travels in waves through matter?
Sound energy is what travels in waves through matter.
Sound Energy is basically the result of a substance's vibration whenever movement of it's constituent particles is induced. It arises when a force, either sound or pressure, makes an object vibrate and the vibrations moving through something is what it is. The energy moves through the substance in waves.
In these waves, the particles move up and down which means that the kinetic energy has been transferred to them. Such waves that travel in the world around us are called mechanical waves and sound waves are a good example of how these propagate.
Learn to know more about Sound on
https://brainly.com/question/14595927
The kind of energy that propagates through matter in waves is known as sound energy.
When a force, such as sound or pressure, causes an item or material to vibrate, the outcome is sound energy. Waves of that energy pass through the material. The sound waves are referred to as kinetic mechanical energy.
The propagation of vibrations through material is referred to as the sound energy. Noise is created when an item vibrates, which releases sound energy. Pressure waves are created by the sound vibrations and move through a material like air, water, wood, or metal.
Some of the examples of sound energy are:
an air-conditioning fana balloon poppinga car horn honkingbaby cryingsnapping your fingersKnow more about Sound energy at,
https://brainly.com/question/21421115
The clock on the big ben tower in london reads 12 noon. If you travel away from the clock at a very high speed and view it with a telescope, you would see.
"The clock on the big ben tower in London reads 12 noon. If you travel away from the clock at a very high speed and view it with a telescope, you would see it run slower than a clock in your vehicle" (Option A) This phenomenon is known as Time Dilation.
What is time dilation?Time dilation is defined in physics and relativity as the difference in elapsed time as measured by two clocks. It is either owing to a difference in relative velocity or a difference in gravitational potential between their places.
When left undefined, "time dilation" generally refers to the impact of velocity.
Time dilation is the "slowing down" of a clock as determined by an observer in relative motion with regard to that clock under the theory of special relativity.
Learn more about Time Dilation:
https://brainly.com/question/1933572
#SPJ1
Full Question:
Suppose you look at the huge clock on the Big Ben Tower in London and it reads 12 noon. If you could travel away from the clock at the speed of light and view it with a telescope, it would:
a) run slower than usual
b) run faster than usual
c) be frozen at 12 noon
why can't we see a galaxy 15 billion light-years away? (assume the universe is 14 billion years old.)
We can't see any galaxies fifteen billion light-years away because looking fifteen billion light-years away means looking to a time before the universe even existed.
How was the universe created?The universe, according to science, began with an explosion of space itself (the explosion is called the Big Bang) around 13.8 billion years ago. Gravity, a fundamental force that pulls masses toward each other, gradually drew matter together to form the first stars and the first galaxies.
Cosmic inflation, which is an extension of the Big Bang, explains why the universe is so homogeneous (or evenly composed) and how galaxies are distributed across space.
Learn more about the Big Bang here: https://brainly.com/question/24453703
#SPJ4
An 8 000-kg aluminum flagpole 100-m long i heated by the un from a temperature of 10°C to 20°C. Find the work done (in J) by the aluminum if the linear expanion coefficient i 24 ´ 10-6 (°C)-1. (The denity of aluminum i 2. 7 ´ 103 kg/m3 and 1 atm = 1. 0 ´ 105 N/m2
The work done by the aluminum in 216 Joules.
The ratio of the increase in length to the original length for each degree increase in temperature is called the coefficient of linear expansion. The coefficient of linear thermal expansion describes the change in the length of a material as a function of temperature. A distinction is made between the average thermal coefficient of expansion and the physical coefficient of linear expansion.
calculation:-
Work done = msT2 -T1
= 8000000 g × 2 × 1/000000 ( 20- 10)
= 600
density = 2.7
work done per unit = 600/2.7
= 216 jolues
The volume expansion coefficient is three times the linear expansion coefficient. Heating an object changes its dimensions. It depends on your body type. Expansion can be done in length in which case it is called linear expansion. Heating a square wafer causes expansion in two planes lengthwise and widthwise. We call this range dilation.
Learn more about The linear expansion coefficient here:-https://brainly.com/question/19495810
#SPJ4
all of the offsets are relative to the master clock zero. all signals are two-phase. there are two lanes in each direction. all block lengths are 1,200 ft.
The engine's valves can open and close during each cylinder's firing because a timing chain synchronizes the rotation of the crankshaft and camshaft(s), ensuring proper timing.
When does a timing chain need to be replaced?Unless there is a specific issue, a timing chain replacement is typically required between 80,000 and 120,000 miles. With higher mileage vehicles, chain problems are more frequent. It is advised to watch for timing chain failure signs if you are driving an older car or one with a lot less than 100,000 miles on the odometer.It's critical to be able to identify the signs of a timing chain problem so that it may be fixed before it becomes irreparable. Otherwise, the timing chain will need to be replaced.The following are indications that a timing chain needs to be replaced:Before an engine rattle, later model VVT applications will produce engine codes and check engine lights.Engine rattling is a result of older, pre-VVT applications.To Learn more About timing chain refer to:
https://brainly.com/question/4435983
#SPJ4
In order to make the loop successfully (and not
lose any passengers), a rollercoaster has to hit a
critical speed before the loop. What is the velocity
of a rollercoaster car if it has a mass of 7,600 kg
and 4,750,000 Joules of kinetic energy?
The velocity of a rollercoaster car is 35.36 m/s.
What is velocity?The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.
Given parameters:
Mass of the rollercoaster; M = 7600 kg.
Kinetic energy of the rollercoaster; E = 4750000 Joules.
We have to find, the velocity of the rollercoaster; v = ?
We know that, Kinetic energy = 1/2× mass × velocity²
⇒ E = 1/2 × mv²
⇒ 4750000 = 1/2 × 7600 × v²
⇒ v = √(2×4750000/7600)
⇒ v = 35.36 m/s.
Hence, the velocity of the rollercoaster is 35.36 m/s.
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ1
a 20 kg loudspeaker is suspended 2.0 m below the ceiling by two 3.0-m-long cables that angle outward at equal angles. what is the tension in the cables?
The tension in the cable is 147N.
Here we have to find the tension in the cables.
The given values are:
Mass of the loudspeaker = 20kg
Height (h) = 2m
Length (l) = 3m
Acceleration due to gravity(g) = 9.8 m/s²
Weight of the loudspeaker = mg
= 20 × 9.8
= 196N
Now according to Newton's second law we have:
TsinФ + TsinФ - weight = 0
T = tension
2TsinФ = weight
T = weight/ 2sinФ
We have to find the value of sinФ
sinФ = h/l
= 2/3
T = 196/( 2 × 2/3)
= 147N
Therefore the tension is 147N.
To know more about the tension refer to the link given below:
https://brainly.com/question/2008782
#SPJ4
a bowling ball is dropped from a height h onto the center of a trampoline, which launches the ball back up into the air. how high will the ball rise?
If a bowling ball is dropped from a height h onto the center of a trampoline, which launches the ball back up into the air, the ball will rise to a height less than h.
Some of the energy of the bowling ball is transferred to the trampoline as friction. Also in its motion, there will be air friction. So, clearly energy is lost. So the ball will not reach the height from which it was launched.
Additionally, a trampoline cannot fully provide the velocity with which it reached the trampoline. Because efficiency of any machine is always less than one. So, this is also a reason why the bowling ball cannot reach its initial height.
Therefore, if a bowling ball is dropped from a height h onto the center of a trampoline, which launches the ball back up into the air, the ball will rise to a height less than h.
To know more about bowling ball on a trampoline
https://brainly.com/question/26024644
#SPJ4
The motion of an object is described as 240 mph to the northeast. What form of motion is being described?.
Answer: velocity
Explanation:
The answer is velocity, because it describes how fast it is going and in what direction
a glass sphere is dropped into a container of water. the sphere weighs 13.1 n and displaces 5.1 n of water. what is the net force on the sphere?
The net force on the sphere that weighs 13.1 N and displaces 5.1 N of water if it is dropped into a container of water is 8 N
Net force = Fg - Fb
Fg = Force of gravity
Fb = Buoyant force
Fg = 13.1 N
Fb = 5.1 N
Net force = 13.1 - 5.1
Net force = 8 N
The direction is towards the force of gravity since Fg > Fb
Buoyant force is the upward thrust provided by the water on an object that is either floating or submerged in water. Force of gravity is the force acting on a mass due to the presence of gravity. It is also called as weight.
Therefore, the net force on the sphere is 8 N downwards
To know more about Buoyant force
https://brainly.com/question/21990136
#SPJ4
Vittorio would like to be able to check whether his shoelaces are tied. Draw the incident and reflected rays showing the light from his shoelaces reflecting off the mirror into his eyes. Again, the rays should meet at the point on the mirror that needs cleaning. (see the hints from part a if you need help. ).
The height of mirror to be cleaned is equal to half the height of the man.
Let the length to be cleaned = x and height = h, distance between mirror and man is p.
The ray from his feet is incident at B.
As it is plane reflection angle RBC = angle IBC
From geometry, angle ARB = θ
From Δ ARB, Tanθ = x/p
From ΔBIC, Tan θ = H-x/p
Equating them,
2x = H
x = H/2
Hence , the height of mirror to be cleaned is equal to half the height of the man.
The law of reflection states that the incident ray, the reflected ray, and the normal to the surface of the mirror, all lie in the same plane.Also, the angle of incidence is equal to the angle of reflection.
Learn more about mirror at : https://brainly.com/question/1160148
#SPJ4
which produces the greater changes in kinetic energy: exerting a 10n force for a distance of 5 m or exerting a 20 n force over a distance of 2 m? (assume that all of the work goes into ke)
A 10N force for a distance of 5 m will produce the greater change in kinetic energy of the body.
According to the work energy theorem, the change in kinetic energy of the body is equal to the work done by the forces on the body.
So, we can write,
W = ΔK
ΔK in kinetic energy change,
W is the work done.
Now, the force is 10N exerted over a distance of 5m. so,
10 x 5 = ΔK
ΔK = 50J.
Now, the exerted force is 20N over a distance of 2m, so,
20 x 2 = ΔK
ΔK = 40J.
Hence, the 20N force is producing more change in kinetic energy of the body.
To know more about work energy theorem, visit,
https://brainly.com/question/22236101
#SPJ4
024 (part 1 of 3) 10.0 points
A 1.0 kg block is pushed 3.0 m at a constant
velocity up a vertical wall by a constant force
applied at an angle of 29.0° with the horizon-
tal, as shown in the figure.
The acceleration of gravity is 9.81 m/s².
1 kg
3 m
29°
Drawing not to scale.
If the coefficient of kinetic friction between
the block and the wall is 0.40, find
a) the work done by the force on the block.
Answer in units of J.
025 (part 2 of 3) 10.0 points
b) the work done by gravity on the block.
Answer in units of J.
026 (part 3 of 3) 10.0 points
c) the magnitude of the normal force between
the block and the wall.
Answer in units of N.
The work done by the applied force is 21.23 J.
The work done by the gravity is 29.4 J.
The magnitude of the normal force between the block and the wall is 9.8 N.
What is the work done by the applied force on the block?The work done by the applied force on the block is calculated by applying the following equation for work done.
W = Fd cosθ
where;
F is the applied forced is the distance in which the block is moveθ is the angle of inclination of the blockThe applied force on the block is calculated as follows;
Fsinθ - μmgsin(90) = ma
at a constant velocity, the acceleration of the block = 0
Fsinθ - μmg = 0
Fsinθ = μmgsinθ
F = μmg/sinθ
F = (0.4 x 1 x 9.8)/sin(29)
F = 8.09 N
The work done by the applied force is calculated as;
W = Fcosθ x d
W = (8.09 x cos29) x 3
W = 21.23 J
The work done by the gravity is calculated as follows;
W = Fn cosθ x d
where;
θ is the angle between the normal force and the block = 0W = mg cosθ x d
W = 1 x 9.8 x cos(0) x 3
W = 29.4 J
The magnitude of the normal force between the block and the wall is calculated as follows;
Fn = mg cosθ
where;
θ is the angle between the normal force and the block = 0Fn = 1 x 9.8 x cos(0)
Fn = 9.8 N
Learn more about normal force here: https://brainly.com/question/14486416
#SPJ1
if earth had a pair of identical moons on opposite sides of the same circular orbit, the center of gravity of the double-moon-earth system would be
If the earth had a pair of identical moons on opposite sides of the same orbit, then the center of the gravity of the double-moon-earth system would be at the center of the earth
The gravitational pull of the moon pulls on the earth, especially in the parts closest to the moon. As a result of this force, the earth's crust rises slightly (a few centimeters). Even ponds and lakes like the Great Lakes experience neap tides. But this gravitational pull can lift the Earth's oceans (and atmosphere) many meters. The moon orbits the earth, creating a "bulge" in the ocean.
On the other side of the Earth's Moon, the gravitational pull is weaker than on any other part of the Earth, and the ocean is "left behind" in another bulge. As there will be identical moons on exact opposite sides, there will be equal gravitational pull, thus we could have gravity at the center of the art.
Learn more about the center of gravity in
https://brainly.com/question/20662235
#SPJ4
SOMEONE HELP
Perform the following conversion.
0.09 km to dam
Answer:9
Explanation:
using eqn. (5), calculate the magnetic field at the center of a fictitious tube. the number of turns on each coil is 130, the current is 1.0 a and the radius of the coils is 20 cm.
The magnetic field at center of a fictitious tube is 7.68 × 10⁻¹⁰ Tesla.
A magnetic field is the area around a magnet where you can feel the effects of magnetism. We use magnetic fields as a tool to describe how magnetic forces are distributed in the surrounding space and in anything that is magnetic in nature. Magnetic fields are created by moving the charges and intrinsic magnetic moments of elementary particles.
It is denoted by B or H . The units of magnetic field is Tesla.
formula : B = μ₀ × I/ 2πr
where, B ---> magnetic field
μ₀ ---> permeability of free space
r --> distance in meters
I ---> magnitude of electric current in ampere
the value of μ₀= 4π × 10⁻⁷ T m / A
we have given that, I = 1.0 A , r = 130 × 20 /100 => r = 26 m
putting all the values in above formula we get ,
B = 4π× 10⁻⁷× 1 / 2π× 26 = 4×10⁻⁷/52
= 7.6 × 10⁻¹⁰ T
Hence, the magnetic field is 7.6 × 10⁻¹⁰ T.
To learn more about Magnetic field , refer:
https://brainly.com/question/28370330
#SPJ4
2.5 escaping a cube ** suppose eight protons are permanently fixed at the corners of a cube. a ninth proton floats freely near the center of the cube. there are no other charges around, and no gravity. is the ninth proton trapped? can it find an escape route that is all downhill in potential energy? feel free to analyze this numerically/graphically.
Consider a cube with eight protons that are fixed in place at each corner. Near the cube's center, a ninth proton floats unimpeded. There is no gravity and no other charges nearby.
There are 3 protons and 3 neutrons in the first isotope. Three protons and four neutrons make up the second isotope and 4/2 + 4/6 = 4.4614 is the potential at the middle of a face. The proton will be pushed outward by the fields of all eight charges, thus this is smaller than in the center and things will only get worse from there.
Although it is fairly flat around x = 0, if you plot this as a function of x, you will find that it is in fact a declining function. Thus, the proton is capable of escaping. If you wish to verify that it is always negative (for x > 0), you can compute the derivative of (x) and plot that result.
Since the potential is unlimited in the cube's corners, the proton will obviously not be able to escape if it moves from the center to those points.
To know more about protons
https://brainly.com/question/29067336
#SPJ4
if both wires are carrying a current of 6.5 a, what is the magnitude of the magnetic field, in teslas, at point p?
The magnetic field's strength at point p is 3.16*10-5 T, which is measured in teslas. A magnetic field is indeed a vector field that explains the magnetic impact on moving electric charges, pulsed electrical.
what is Simple definition of a magnetic field?Around a magnet, where magnetism is present, is a region known as the magnetic field. To represent the distribution of the magnetic force in the area surrounding and inside something magnetic in nature, we utilize the magnetic field as a tool.
How exactly can the magnetic field operate?South and north poles are present in every magnet. In contrast to each other repelling each other, opposite poles are drawn to one another. The north-seeking poles of the iron's atoms align in the same direction when you run a piece of iron along a magnet. A magnetic field is created as a result of the force produced by the aligned atoms.
To know more about magnetic field visit:
https://brainly.com/question/23096032
#SPJ4
During eeg measurements, 6-10 electrodes are attached to the scalp and produce line drawings that represent __________. a. brain function b. mental activity c. x-rays d. brain patterns please select the best answer from the choices provided a b c d
Using concepts of errors and measurement, we got that During eeg measurements, 6-10 electrodes are attached to the scalp and produce line drawings that represent a) brain function is the best answer from the choices.
An electroencephalogram (EEG) is the noninvasive test that records electrical patterns in the brain. It is the recording of the electrical activity of the brain from the scalp. The recorded wave forms reflect cortical electrical activity. The test is used to help diagnose conditions such as the seizures, epilepsy, head injuries, dizziness, headaches, brain tumors and the sleeping problems. It can also be used to confirm the brain death.
-Brainwaves are produced by synchronized electrical pulses from the masses of the neurons communicating with each other. Brainwaves are actually detected using sensors placed on the scalp.
Hence, During eeg measurements, 6-10 electrodes are attached to the scalp and produce line drawings that represent a) brain function is the best answer from the choices provided a b c d.
To know more about errors and measurement, visit here:
https://brainly.com/question/28109798
#SPJ4
Answer:
brain function
Explanation:
an 82-kg stunt man falls off the top of a large building. after falling for 65 meters he has a speed of 22 m/s. assuming he was initially at rest, what was the average force of air resistance exerted on the stunt man during his fall?
The average drag force on the stuntman during a fall is 305.29 N. force is a push or a pull.
.
Start by collecting the kinetic energy of the stuntman.
Mass (m) = 82 kg
Velocity (v) = 22 m/s
Kinetic Energy (KE) =?
KE = 19844 J
Finally, determine the average drag applied to the stunt. This is obtained as follows:
Distance = 65 meters
Energy = 19844 J
Average force =?
Energy = Work
Work (W) = Force (F) × Displacement (d)
W = Fd
So
E = W = Fd
19844 = F × 65
Divide both sides 65
F = 19844 / 65
F = 305.29 N
So, from the above calculation we can conclude that the average force is 305.29 N
Learn more about energy here-
https://brainly.com/question/1932868
#SPJ4
.
high voltage power lines are usually supported by glass insulators. an electric current cannot flow through a piece of glass because
Glass is an insulator, meaning it does not allow electricity to flow freely. This is why glass insulators support high-voltage power lines - to prevent the electricity from flowing through the glass and causing a short circuit.
Glass is used as insulation in what situations?
Before newer materials, such as ceramic and fiberglass, became accessible, glass was a widely used electrical insulator in telephone and power lines. Glass insulators are now more frequently found at antique stores than in regular situations.Glass is a wonderful electrical insulator, but it also has a lot of other beneficial qualities. It is an effective thermal insulator.To learn more about glass insulators, follow the link https://brainly.com/question/27261557
#SPJ4
A rocket has a mass of 80,000 kg and accelerates at a rate of 35 m/s2. Calculate the force that provides this acceleration. Give your answer in newtons.
The force that causes an acceleration of 35 m/s² with a mass of 80,000 kg is 2,800,000 N.
Solution:
Force (N) = mass (kg) × acceleration (m/s²)
According to this question, a rocket has a mass of 80,000 kg and accelerates at a rate of 35 m/s². The force can be calculated as follows:
F = 80,000kg × 35m/s²
F = 2,800,000N
The force is equal to the outlet mass flow rate times the outlet velocity times the free stream mass flow rate minus the free stream velocity. Acceleration is the rate of change of velocity over a specified time. Calculate acceleration by dividing the change in velocity by the change in time.
This characteristic is known as the velocity ratio and is calculated by dividing the distance traveled by the force by the distance traveled by the load. Force is push or pull. Shear is the component of force acting perpendicular to a plane. Push is force, but not all force counts as push. So they are not exactly the same and the given statement is incorrect.
Learn more about A mass here:- https://brainly.com/question/19385703
#SPJ4
The right answer is "2800000 N"
Answer explanation:
Force = mass × acceleration
= 80,000 kg × 35 m/s2
= 2,800,000 N.
Hope it helps ✨✨
