before the lab class, use the web or other resources and find out the chemical formula and the molar mass of methanol, ethanol, 1-propanol, 1-butanol, n-pentane, n-hexane. identify which compounds exhibit hydrogen bonding.

Ch3oh Ch3oh substances is a liquid at room temperature.

A sample of substance is considered to be liquid if it takes on the shape of the container in which it is contained and develops a distinct surface when gravity is present. We now turn our focus to three distinctive qualities of liquids that directly relate to the type of intermolecular interactions: surface tension, capillary action, and. The term "liquid" is also used to refer to the state, or condition, of matter having this property. viscosity. Although a liquid has a predetermined volume, its shape is not fixed. Blood, oil, and water are a few examples of liquids. A state of matter known as a liquid has a defined volume but no set shape. To put it another way, a liquid assumes the shape of its container.

Learn more about liquid here:

https://brainly.com/question/20922015

#SPJ4

Shear force is the vertical force acting on the beam or any other structure while the bending moment is the consequence of the structure rotating. See the diagram in the picture. Shear and Moment diagrams are used to show the various effective forces acting on a beam. I provided an explanation below.

The acronyms SFD and BMD stand for the structure's applied shear force diagram and bending moment diagram, respectively. To acquire the necessary strength and durability of the structure, you must take into account the overall shear force and bending moment while designing or analyzing any structure.

Shear force is the algebraic total of all vertical forces operating on the structure. It may be under the influence of an upward or downward force. It has the Newton SI unit (N). SFD is the term for the shear force's visual depiction (Shear force Diagram). The term "bending moment" refers to the algebraic sum of all moments acting on the structure. It might be moving in a clockwise or counterclockwise motion. Its Newton-meter SI unit is used (N-m). BMD is the abbreviation for the bending moment's graphic representation (Bending Moment Diagram).

Learn more about Beam

https://brainly.com/question/29500383

#SPJ4

2-Ethyl-1-butene is a minor product whereas 3-methyl-2-pentene is the main one.

3-Bromo-3-methyl pentane is the alkyl halide shown. This tertiary alkyl halide can be seen. The Markovnikov rule is used to calculate the percentage of products that are produced throughout the reaction.

This process produces 2-ethyl-1-butene and 3-methyl-2-pentene as its two byproducts. Due to the fact that it is produced from a more stable carbocation intermediate, 3-methyl-2-pentene is the main byproduct. The minor product is 2-ethyl-1-butene.

When an acid catalyst is present, the typical reaction of benzonitrile with ethanol is expressed as follows:

C₆H₅CN + CH₃CH₂OH + H⁺ → C₆H₅ CO NH CH₂CH₃ (N- ethyl acetamide)

To learn more about 3-methyl-2-pentene please click on below link

https://brainly.com/question/13981353

#SPJ4

The order of basicity for these compounds is:

The basicity of a compound refers to its ability to donate a pair of electrons. In general, the more electronegative an atom is, the less basic a compound will be. The electronegativity of the atoms in a compound can be used to predict its basicity.

In the case of the compounds you listed, pyridine is the most basic because it has the least electronegative atoms. 3-nitropyridine is less basic than pyridine because it has a nitro group (-NO2), which is more electronegative than a hydrogen atom. Finally, 3-chloropyridine is the least basic because it has a chlorine atom, which is even more electronegative than a nitro group.

Learn more about bacity, here https://brainly.com/question/15347758

#SPJ4

The problem's introduction's description of the wave, which is going in the +x direction, is accurate.

Due to the particles just on left side of the wave going upward and approaching their peak, the wave is traveling to the left. Alternatively, if the particles just on right are traveling up and the particles just on left are moving down, the wave is moving to the right.

When a wave's disturbance travels perpendicular to the wave's direction, the wave is said to be transverse. While the disturbance swings up and down, you might imagine the wave going from left to right. A water wave with up-and-down water movement as it travels across the ocean is an illustration of a transverse wave.

To know more about wave traveling visit:

https://brainly.com/question/13771235

#SPJ4

The equation states when 1.0 mol if mg was combined to 2.0 mol of br2, 0.37 mol of mgbr2 was produced, as well as the percentage yield for reaction is 41.99%.

A reaction is a course of action that is conducted in response to something. If you tell your parents you want to move out, one can tell if they're displeased by their reaction. Physical elements are typically present in reactions.

amount of magnesium moles = 1 mole

amount of bromine gas in moles = 2 moles

obtained moles for magnesium bromide= 0.42 moles

percent yield =?

chemical reaction balance:  Mg Br₂ +  ⇒ Mg₂

MgBr2 was produced when 1 mole when Mg interacted.

Br2 interacted to produce 1 moles of MgBr2.

Br2 was reacted to produce 2 moles of MgBr2.

limiting reagent is Mg

hence, mass produced is 1 mole Mg = 1 x 184.11

mass obtained = 184.11 (theoretical yield)

actual yield = 0.42 x 184.11

actual yield = 77.32 grams

percent yield =actual yield/theoretical yield*100

the values being entered into the equation:

           77.32/184.11*100

         =41.99%

To know more about reaction visit:

brainly.com/question/28984750

#SPJ4

Answer:

43.8 g of iron can be recovered

Explanation:

First get the mass of Fe3O4 in the ore:

80g Ore * (76 g Fe3O4 / 100 Ore) = 60.8 g Fe3O4

Then get number of moles of Fe3O4:

60.8 g Fe3O4 * 1 mol / 231.535 g = 0.262 mol Fe3O4

**231.535 g is the molar mass of Fe3O4

Then get number of moles of Fe:

0.262 mol Fe3O4 * (3 Fe / 1 Fe3O4) = 0.786 mol Fe

** 3 atoms of Fe in every Fe3O4

Finally convert moles of Fe to grams of Fe:

0.786 mol * 55.845 g/mol = 43.79 g Fe --round to 3 sig figs--> 43.8 g Fe

A collision hypothesis that claims a chemical reaction can only happen when reactants collide at the right angle and with enough kinetic energy.

A material that's also present at the outset of such a chemical reaction is known as a reactant. Products are the substrate(s) to the side of the arrow. A component that remains after a chemical reaction is finished is known as a product.

The chemicals (what you started with) be transformed into byproducts in a chemical process (what you end with). An arrow separates the reaction mixture, which are indicated on the left side of a solution, from the products, who are depicted on the right.

To know more about Reactants visit:

https://brainly.com/question/17096236

#SPJ4

If The Bond Angle Between Two Adjacent Hybrid Orbitals Is 180 Hybridization is Sp2.

A space object appears to follow an orbit as it moves around another space object. A satellite is a spacecraft that orbits the planet. A natural satellites that matches the Earth nor moon is one possibility. Moons are satellites in the orbits of numerous nations. A man-made satellite, such as the Space Stations, provides an additional choice.

The positions of the electrons are dictated by the entire molecule when several atoms unite chemically to form a molecule, combining the atomic orbitals into molecular orbitals. The molecular orbitals are occupied by the electrons of the component atoms. There are two electrons in each orbital, and their spins vary. An atom's orbital is the area of space where an electron resides.

To know more about Orbitals visit:

brainly.com/question/18914648

#SPJ4

The lead-acid  battery used in truck and car batteries is depicted in the following cell diagram: The comma between PbO2(s) and pbSO4(s) indicates that the two solids are heterogeneously mixed, and the right

(a)The balanced net cell reaction is given below.

[tex]Pb(s)+PbO_2(s)+2H_2SO_4(aq) \rightarrow 2PbSO_4(s)+2H_2O(l)[/tex]

(b)The standard potentials for cathode and anode are as given below.

[tex]E^0_{anode}[/tex]=+1.685V

[tex]E^0_{anode}[/tex]-0.356V

[tex]E^0_{cell}=E^0_{cathode}-E^0_{anode}[/tex]=1.685V-(-0.356V)=2.041V

(c) [tex]\Delta G^0 =-nFE^0_{cell}=-2 \times 96500 \times 2.041=[/tex]-393913 J/mol = -393.9 kJ/mol

(d)[tex]E_{cell}=E^0_{cell}+\frac {0.0592}{2}log[H_2SO_4]=2.041 V+\frac {0.0592}{2}log10.0[/tex]=2.071V

(e) The number of lead-acid cells in a 12 V car battery = [tex]\frac {12}{2.071} \approx 6[/tex]

Two electrodes that are buried in a sulfuric acid electrolyte make up a lead-acid battery. In contrast to the negative electrode, which is fastened to a grid of metallic lead, the positive electrode is constructed of metallic lead oxide grains. Both flooded and valve-regulated lead-acid batteries fall within this category. Although less expensive than valve-regulated lead-acid batteries, flooded lead-acid batteries need more ventilation and maintenance. Due in large part to their portability and affordable price, lead-acid batteries are frequently employed in renewable energy systems. The low number of charging-discharging cycles, low discharge intensities, short lives, and slow charging rates of these batteries provide several difficulties.

Learn more about lead-acid  battery here:

https://brainly.com/question/11646521

#SPJ4

As the term "peroxide" is used in Chapter 10 it can refer to RCOOCR structure.

Hydrogen peroxide solutions up to 9% in concentration are often safe when consumed; nonetheless, even a 3% solution is slightly irritating to nasal mucosa and might result in vomiting and diarrhea. Industrial-strength solutions (10%) when consumed induce systemic toxicity and have been linked to deaths.

The fact that oxygen is an anion and hydrochloric acid is a chemical substance is the main distinction between the two peroxides. The specific class of oxygen compounds known as peroxides has distinctive characteristics. Thenard, a French chemist, made the discovery of hydrogen peroxide in 1818.

To know more about peroxide visit:

https://brainly.com/question/29102186

#SPJ4

The Lewis structure for ethene that is CH2CH2 is that each carbon has four valence electrons, from which it's going to use 2 of the electrons from every to make a double bond among them.

Determine the overall range of valence electrons. Step 2: Write the skeleton shape of the molecule. Step 3: Use valence electrons to shape every bond withinside the skeleton shape. Step four: Try to fulfill the octets of the atoms through dispensing the last valence electrons as nonbonding electrons.For C2H4 you've got got a complete of 12 overall valence electrons.

Drawing the Lewis shape for C2H4 (named ethene) calls for the usage of a double bond. In a double bond pairs of valence electrons are shared (for a complete of 4 valence electrons). The electron dot shape of ethene, C 2 H four : The overall range of valence electrons gift in. Here the significant atom is carbon, while Hydrogen is selected because the aspect atom.

Read more about Lewis structure;

https://brainly.com/question/14246855

#SPJ4

The acid concentration of a sample of acid rain with a pH of 4.20 would be  0.000063 M.

What is pH?

The pH of a substance is the degree of acidity or alkalinity of a substance. It is mathematically expressed as:

pH = - log [[tex]H^+[/tex]]

Where  [[tex]H^+[/tex]] is the hydrogen ion concentration or molarity of the solution.

In this case, the pH is 4.20. Substituting into the equation:

4.20 = - log  [[tex]H^+[/tex]]

log  [[tex]H^+[/tex]] = - 4.20

       [[tex]H^+[/tex]] = Antilog -4.20

                = 0.000063 M

Thus, the concentration of the sample acid rai with a pH of 4.20 would be 0.000063 M

More on acid rain can be found here: https://brainly.com/question/22143130

#SPJ1

True. Fusion leads to more microstates ( degree of fusion). so, All entropies of fusion are negative.

Entropy is defined as the the measure of a system's thermal energy per unit temperature that is unavailable for doing useful work. Because work is obtained from ordered molecular motion the amount of entropy is also a measure of the molecular disorder or randomness of a system. The entropy of fusion is the increase in entropy when melting a solid substance. This is almost always positive since the degree of disorder increases in the transition from an organized crystalline solid to the disorganized structure of a liquid.  The entropy of fusion is negative for helium-3 at temperatures below 0.3 K. Entropy of fusion is also negative for helium-4 at temperatures below 0.8 K.

To learn more about Entropy of fusion please visit:

https://brainly.com/question/29591296

#SPJ4

Ester hydrolysis by the SN1 pathway is acid-catalyzed and reversible. By protonating carbonyl oxygen and making carbonyl carbon more vulnerable to nucleophilic attack, acid catalysts hasten the process.

An ester is hydrolyzed by acid to produce an alcohol and a carboxylic acid. An ester undergoes basic hydrolysis, yielding an alcohol and a carboxylate salt. Esters are hydrolyzed by acids in a pseudo-first order process.

H2SO4+H2O → HSO4 −+H3O+

With the addition of the components of water, a protic acid is employed to catalyze the breaking of a chemical bond by a nucleophilic substitution reaction in the process known as acid hydrolysis in organic chemistry (H2O). For instance, glucose is produced when cellulose or starch are converted. Sulfuric acid hydrates itself in a very exothermic process. Concentrated sulfuric acid catalyze can boil and spit violently if water is added to it. It is usually preferable to add acid to water rather than water to acid.

Learn more about hydrolysis here:

brainly.com/question/24244589

#SPJ4

When an unstructured crystals polymer is annealed considerably below melting temperature, its tensile modulus increases.

The portion left over after dividing one integer by another is known also as modulus (or "modulus" or "mod"). For instance, 100 mod 9 is 1. due to the fact that 100/9 Equals 11 with a residue of 1. Here's another illustration: 14 modulo 12 equals 2. since the remainder is 2, and 14/12 = 1.

No matter what that's sign, a real number's non-negative value, or absolute value (or modulus), is | x |. For instance, five has an absolute value of five, and five less five also has an absolute value of five. To measure the elastic modulus, we often use megapascals (MPa) or gigapascals (GPa).

To know more about modulus visit:

brainly.com/question/13265442

#SPJ4

molecules in order of decreasing bond angle:CO2 > CCl4 > NH3 > OF2

Bond angle is referred to as the angle between two bonds, or the angle between two orbitals surrounding the central atom in a complex molecule or ion that include bonding electron pairs. The spectroscopic approach is used to calculate it and it is expressed in degrees. Three linked nuclei in a molecule form an angle called a bond angle. Conventionally, the bond angle is thought to range from 0° to 180°. The angles and topologies of electron domains are distinctive. With a bond angle of 180°, for instance, a center atom with two zones of electron density is regarded as linear.

Learn more about bond angle here:

https://brainly.com/question/13751116

#SPJ4

The chemical symbol for the anion is Ar+2. The ion has 20 electrons. There are 2 2s electrons are in the ion.

Ar+2 is the atomic anion.

The anion electrical structure is as follows:

1s2,2s2,2p6,3s2,3p6,3d2

For an electrically neutral atom, the number of electrons is equal to the number of protons.

The atoms in this instance have gained two electron and are now anion.

As a result, the atom's electrically neutral state is denoted as follows:

1s² 2s² 2p⁶ 3s² 3p⁶

The neutral atom's number at atomic structure will be  2 + 2 + 6 + 2 + 6 = 18

As a result, since it gained 2 electron, the element is Argon , and the ion's symbol is Ar+2.

1s2,2s2,2p6,3s2,3p6,3d2 is the ion's electrical configuration. Since it lost one electron, the ion's total number of electrons is now

To learn more about electron configurations visit:

https://brainly.com/question/29757010

#SPJ4

There are one atom in the center and four atoms at each of the four corners of the (100) plane.

The unit cell contains one-fourth of each corner atom and the complete middle atom, making the total number of atoms on the (100) plane inside the cell N100 = 4 (1/4) + 1 1 = 2.

For more questions like fcc crystal structure visit the link below

https://brainly.com/question/11981666

#SPJ4

Alkanes are the simplest family of hydrocarbons, compounds containing only carbon and hydrogen, and only carbon-hydrogen bonds and carbon-carbon single bonds. Alkanes are less reactive and have little biological activity. All alkanes are colorless and odorless.

What are the applications of 3-hexanol?

n-Hexanol is a colorless liquid with a fruity smell. It is used in the production of flavoring additives, pesticides, leather processing, preservatives, perfumes, plasticizers and other chemicals. n-Hexanol is included on the Hazardous Materials List as cited by the DOT and NFPA.

What are alkanes?

In organic chemistry, alkanes or paraffins are saturated acyclic hydrocarbons. In other words, alkanes are composed of hydrogen and carbon atoms arranged in a tree structure in which all carbon-carbon bonds are single. Alkane has the general chemical formula CₙH₂ₙ₊₂

To know more about alkanes, visit:

https://brainly.com/question/17040500

#SPJ4

True compound is O A compound is a substance composed of atoms of two or more elements chemically united in a fixed ratio.

A compound is a substance composed of atoms of two or more elements chemically united in a fixed ratio. It cannot be separated into simpler substances by chemical means and retains its distinct identities. A compound may be a solid, liquid, or gas at room temperature, and may also be homogeneous or heterogeneous.

A homogeneous compound is a substance that is made up of only one type of atom or molecule. Examples of homogeneous compounds are water (H2O), carbon dioxide (CO2), and table salt (NaCl).

A heterogeneous compound is a mixture of two or more substances in which the components retain their individual physical properties. Examples of heterogeneous compounds include mixtures of oil and water, concrete, soil, and even a glass of iced tea.

Find More: https://brainly.com/question/14117795?referrer=searchResults

#SPJ4

Major product CHCI is the reaction's main byproduct.

Large and Small Products

The product that was created using Markovnikov's rule is considered to be the major product out of the two conceivable products. Most of the time, this substance will form (70%–95%). The minor product is the name for the substitute.

When 1,3-butadiene and HCl are combined at a higher temperature (100 oC or above), 1-chloro-2-butene is the main byproduct produced. This is an illustration of a 1,4-addition reaction where a C=C double bond is rearrange.

To know more about Major product visit:-

https://brainly.com/question/12287359

#SPJ4

Major product: The product that is produced in the greatest amount in a chemical reaction.

What are chemical reactions?

A chemical reaction is the process of chemically transforming a set of chemicals into another chemical. Classically, chemical reactions involve changes that affect only the positions of electrons in forming and breaking chemical bonds between atoms, without changes in the nucleus (no changes in the elements present), often , which can be written as a chemical equation. Nuclear chemistry is a subfield of chemistry that deals with chemical reactions of unstable radioactive elements in which both electronic and nuclear changes can occur.

The substances that first participate in a chemical reaction are called reactants or reagents. A chemical reaction is usually characterized by a chemical change, usually resulting in one or more products with different properties than the reactants. Reactions often consist of a series of individual steps, so-called elementary reactions, and information about the exact process is part of the reaction mechanism. Chemical reactions are described using chemical formulas that symbolically represent starting materials, final products, sometimes intermediates, and reaction conditions.

Therefore, Major product: The product that is produced in the greatest amount in a chemical reaction.

To know more about Major product, visit:

https://brainly.com/question/13739466

#SPJ4

Complete question is: What is a major product? draw the major product for each of the following reactions?

Answer: Quick Meaning and Difference

Explanation: As an electron moves from one level of energy to another within an atom or artificial atom, it appears discontinuous as it "jumps" from one level of energy to another. It is a form of deexcitation, atomic transition or quantum leap, this occurs when electrons are excited or de-excited. while In an atom or artificial atom, an electron transitions from one energy level to another. The quantum jump involves abruptly switching between quantum states or energy levels within a quantum system. A transition from one energy level to another occurs when the system absorbs energy; a transition from one energy level to another occurs when the system loses energy. I'm not sure quantum jumps even exist at the moment. A quantum leap has been the subject of controversy among physicists for over a century. The answer is now in, and everyone was a little bit right. Basically, quantum leaps or jumps are energy level jumps made by orbiting electrons in an atom. Atoms create photons when electrons move to a lower energy level and absorb them when electrons move to a higher energy level or leave the atom (ionization).

There is zero plagirism in this entire paragraph so feel free to copy and paste this into whatever assignment you like.

Thermal energy - found when internal energy is transferred

Electrical energy - found in the flow of electrical charges

Chemical energy - found in the bonds between atoms

Nuclear energy - found in the nucleus of an atom

Here, sodium is allowed to shift from 4p to 4s, and its wavelength is 2.214 m. A wave's wavelength is described as the characteristic that measures the separation between adjacent spots.

Calculations are made between the two succeeding waves. The Greek letter lambda () is used to represent it. Thus, the wavelength is defined as the separation between one wave's crest or trough and the following wave. The chemical element sodium has the atomic number 11 and the letter Na, which derives from the Latin natrium. It is a malleable, silvery-white, and extremely reactive metal. In group 1 of the periodic table, sodium is an alkali metal.

a change from 4p to 4s

As l = 1 for a 4p state and I = 0 for a 4s state, this transition is permitted because l = 1 - 0 = 1

4p (Ei) = 3.75 eV energy

Energy of 4s (E2) = 3.19 eV,

with = 1240 eV nm / (E2 - E1) = 2214 nm 2.214 m.

Learn more about sodium here

https://brainly.com/question/29327783

#SPJ4

The complete question is-

Is a 4p S 4s transition allowed in sodium? If so, what is its wavelength? If not, why not?

All of the atoms in the Lewis structure of CHCl3 have a formal charge of zero.

Since there are no H-atoms directly connected to O in dimethyl ether (CH3OCH3), ethers cannot form an H-bond. Due to the stearic repulsion of the R-groups in ethers, the H-bond formed with the O-atom of ether is extremely weak even when ether is combined with polar solvents like H2O or H2O2.

Acetone's main atom is the red-hued carbon. A double bond and two single bonds make up the three electron groups that make up this carbon. Acetone has a trigonal planar structure with 120o bond angles, in accordance with All of the atoms in the Lewis structure of CHCl3 have a formal charge of zero.

To know more about CHCl3 visit:-

https://brainly.com/question/14573780

#SPJ4

In the case-

what is synapse?

At junctions known as synapses, neurons talk to one another. One neuron communicates with a target neuron, or another cell, at a synaptic junction.

Chemical messengers are used by the majority of synapses to communicate. Other synapses are electrical; ions move directly between cells in these synapses.

An action potential causes the presynaptic neuron at a chemical synapse to release neurotransmitters. These substances attach to the postsynaptic cell's receptors and alter the likelihood that it will release an action potential.

One axon may have several branches, allowing it to form synapses with different postsynaptic cells. The same is true for presynaptic—sending—neurons, which can deliver thousands of synaptic inputs to a single neuron.

Numerous synaptic vesicles can be seen inside the axon terminal of a transmitting cell. Neurotransmitter molecules are contained within these membrane-bound spheres. The axon terminal of the presynaptic neuron and the membrane of the postsynaptic cell are separated by a tiny space known as the synaptic cleft.

Action potentials, or nerve impulses, cause voltage-gated calcium channels in the cell membrane to open when they reach the axon terminal. Ca 2+ rushes into the cell from the exterior, where its concentration is significantly higher than its interior. Ca 2+ enables the fusion of synaptic vesicles with axon terminal membrane, which releases neurotransmitter into the synaptic cleft.

Neurotransmitter molecules diffuse across the synaptic cleft and interact with receptor proteins on the postsynaptic cell. Ion channels in the cell membrane open or close in response to the activation of postsynaptic receptors. Depending on the ions involved, this might depolarize the cell, making it more positive, or it could hyperpolarize the cell, making it more negative.

To learn more about synapse

https://brainly.com/question/25745431

#SPJ1

the energy of every photon in the list below, expressed in kilojoules per mole 2.362*10^7 KJ/mol,4.948*10^-7 KJ/mol,4.517*10^-7 KJ/mol

1) Given:

f = 5.92*10^19 s-1

Find energy of 1 photon first

use:

E = h*f

=(6.626*10^-34 J.s)*(5.92*10^19) s-1

= 3.923*10^-14 J

Energy of 1 mol = energy of 1 photon * Avogadro's number

= 3.923*10^-14*6.022*10^23 J/mol

= 2.362*10^10 J/mol

= 2.362*10^7 KJ/mol

2)Given:

f = 1.24*10^6 s-1

Find the energy of 1 photon first

use:

E = h*f

=(6.626*10^-34 J.s)*(1.24*10^6) s-1

= 8.216*10^-28 J

Energy of 1 mol = energy of 1 photon * Avogadro's number

= 8.216*10^-28*6.022*10^23 J/mol

= 4.948*10^-4 J/mol

= 4.948*10^-7 KJ/mol

3)Given:

[tex]\lambda[/tex] = 2.65*10^2 m

Find the energy of 1 photon first

use:

E = h*c/l[tex]\lambda[/tex]

=(6.626*10^-34 J.s)*(3.0*10^8 m/s)/(2.65*10^2 m)

= 7.501*10^-28 J

This is the energy of 1 photon

Energy of 1 mol = energy of 1 photon * Avogadro's number

= 7.501*10^-28*6.022*10^23 J/mol

= 4.517*10^-4 J/mol

= 4.517*10^-7 KJ/mol

Learn more about photon here:

https://brainly.com/question/20912241

#SPJ4

The net combination of electron for the bond strength of a molecule ,  Bond order allows us to identify.

In chemistry, the strength with which a chemical bond keeps two atoms together is known as bond strength. The energy needed to break the bond is often given in units of kilocalories per mole. As the number of electron pairs in a bond between two atoms rises, so does the bond's strength. Thus, triple bonds are stronger and shorter than double bonds between the same two atoms, and double bonds are similarly stronger and shorter than single bonds between the same two atoms.

Learn more about bond strength here:

https://brainly.com/question/6214363

#SPJ4