Billy is the operator of The Water Bottle Company, which sells water bottles. He previously determined that the fixed costs of the company consist of property taxes, a lease, and executive salaries, which add up to $1,000,000. The variable cost associated with producing one water bottle is $2 per unit. The water bottle is sold at a premium price of $12. a) Determine the break even point for the premium water bottle. b) Determine the number of units sold to make profit of $1,000,000.

The allocation of net income for the year is 40,800 for Adler, 10,800 for Milton, and 20,400 for Bryant, as well as a remainder of 60.

1. Adler, Milton, and Bryant's capital balances were $20,000, $30,000, and $50,000, respectively. Adler and Milton would divide the next $30,000 in service to Adler and Bryant; however, Milton would not be given a salary allowance. The balance is then split equally. Compute each partner's share of the $72,000 net income for the year as follows: 2. The entry for allocating net income for the year is recorded as follows: Therefore, the allocation of net income for the year is 40,800 for Adler, 10,800 for Milton, and 20,400 for Bryant, as well as a remainder of 60. The total of all salary allowances and capital allocations for the year is $102,960 ($40,800 + $20,000 for Adler; $10,800 + $30,000 for Milton; $20,400 + $50,000 for Bryant; and $60 for the remainder). The remaining balance of $60 is distributed equally among the partners.

To know more about income visit:

https://brainly.com/question/2386757

#SPJ11

Milton, Adler, and Bryant have a net income of $72,000 to share according to the company's profit and loss sharing policy. Adler has allocation of $25,000 and salary allowance of $15,000. Milton has allocation of $13,000 and no salary allowance. Bryant has allocation of $34,000 and salary allowance of $15,000.

Compute each partner's share of the $72,000 net income for the year. Net income of $72,000 is to be divided into three sections based on the company's profit and loss sharing policy.

Firstly, the first $30,000 is to be divided based on the partners' capital balances, so each partner's share of this section of the net income is as follows:

$30,000 (divided by) / $100,000 (total capital balances) x $20,000 (Adler's capital balance) = $6,000 - Adler

$30,000 (divided by) $100,000 (total capital balances) x $30,000 (Milton's capital balance) = $9,000 - Milton

$30,000 (divided by) $100,000 (total capital balances) x $50,000 (Bryant's capital balance) = $15,000 - Bryant

Secondly, the next $30,000 is to be divided based on service, which is to be shared equally by Adler and Bryant, with Milton receiving no salary allowance. Therefore, each partner's share of this section of the net income is as follows: $30,000 (divided by) / 2 (equal service sharing partners) = $15,000 (equal share per partner.). Adler and Bryant will each receive $15,000, and Milton will not receive any salary allowance since he is not a service-sharing partner.

Finally, the remainder of the $72,000 net income, which is $12,000, will be shared equally among the three partners as follows: $12,000 (divided by) / 3 (number of partners) = $4,000 (equal share per partner)

Journalize the closing entry to allocate net income for the year.

The closing entry will be used to allocate the net income for the year and determine the salary allowance and total allocation for each partner.

The first step is to determine the total allocation for each partner:

$6,000 Adler (from capital allocation) + $15,000 Adler (from service sharing) + $4,000 Adler (from equal sharing) = $25,000 Adler, $9,000 Milton (from capital allocation) + $0 Milton (from service sharing) + $4,000 Milton (from equal sharing) = $13,000 Milton, $15,000 Bryant (from capital allocation) + $15,000 Bryant (from service sharing) + $4,000 Bryant (from equal sharing) = $34,000 Bryant.

The next step is to compute the salary allowance for each partner, which is the portion of the total allocation not based on capital balances:

$15,000 Adler (from service sharing) + $15,000 Bryant (from service sharing) = $30,000 (total salary allowance).

Finally, the closing entry to allocate net income for the year is as follows:

Net income (loss) $72,000 Adler, Capital $6,000 Adler, Salary Allowance $15,000 Milton, Capital $9,000 Milton, Salary Allowance $0 Bryant, Capital $15,000 Bryant, Salary Allowance $15,000 Retained Earnings $12,000 (To allocate net income for the year based on capital balances and service sharing)

In conclusion, the total allocation for Adler is $25,000, with a salary allowance of $15,000, the total allocation for Milton is $13,000, with no salary allowance, and the total allocation for Bryant is $34,000, with a salary allowance of $15,000. The closing entry to allocate net income for the year is shown above and indicates how the net income is allocated to each partner.

Learn more about salary allowance visit:

brainly.com/question/31021044

#SPJ11

(a) As of my knowledge cutoff in September 2021, approximately 23% of the world's primary energy supply comes from natural gas.

(b) The two countries that were globally producing the largest quantities of natural gas as of my knowledge cutoff in September 2021 were the United States and Russia.

please note that rankings and production levels can change over time due to various factors such as exploration, new discoveries, and technological advancements.

(c) As of my knowledge cutoff in September 2021, the two countries from which Europe gets most of its natural gas are Russia and Norway. These countries are major suppliers of natural gas to European countries through pipelines and liquefied natural gas (LNG) shipments. However, specific import patterns and sources may vary over time as countries diversify their energy supplies and establish new trade agreements.

Learn more about suppliers here:

https://brainly.com/question/9379790

#SPJ11

The correct journal entry is option D:

Equity Investments (debit) and Cash (credit) for $30,000 each.

The correct journal entry to record the transaction on July 2, 2025, would be option D: Equity Investments (debit) and Cash (credit) for $30,000 each.

Since Gaines Corporation holds equity securities in Owens Technologies, Inc. with no significant influence, the investment is classified as available-for-sale. When Owens Technologies pays a cash dividend of $1 per share, Gaines Corporation as the shareholder would receive a dividend income. This dividend income is recognized by debiting the Equity Investments account for $30,000, representing the dividend received, and crediting the Cash account for the same amount, reflecting the increase in cash.

Therefore, the correct journal entry is:

Equity Investments (debit) $30,000

Cash (credit) $30,000

Learn more about transaction

brainly.com/question/24730931

#SPJ11

The macroeconomics questions among the options provided are: d. How much inflation should the economy tolerate?

Macroeconomics is concerned with the broader aspects of the economy as a whole, such as aggregate economic indicators, national income, employment, inflation, and overall economic performance. The question about the acceptable level of inflation relates to macroeconomics as it involves assessing the impact of inflation on the entire economy.

This question pertains to macroeconomics as it focuses on the acceptable level of inflation for an entire economy. Inflation refers to the general increase in prices of goods and services over time. It is an important macroeconomic indicator that reflects the erosion of purchasing power and affects various aspects of the economy, including consumers, businesses, and policymakers.

Learn more about macroeconomics here:

https://brainly.com/question/28489802

#SPJ11

To cover the total costs the minimum price that the company should have for the product is 6.45. (Option E)

To determine the minimum price that covers the total costs, we need to consider the annual expenses and the salvage value. The annual expenses are $125 million, and the salvage value is $90 million. We can calculate the annual cash flow by subtracting the annual expenses from the salvage value, which gives us $90 million - $125 million = -$35 million. The negative cash flow indicates a loss.

To cover this loss and earn a minimum required return of 17%, we divide the initial investment of $600 million by the annuity factor at 17% for 11 years, which is 4.91. Thus, the minimum price per unit should be $600 million / 50 million units = $12.

However, we need to consider that the negative cash flow of -$35 million is spread over the 50 million units, resulting in an additional cost of -$35 million / 50 million units = -$0.70 per unit. Adding this cost to the minimum price of $12 gives us $12 - $0.70 = $11.30.

The minimum price that the company should have for the product is 6.45

Learn more about cash flow here:

https://brainly.com/question/27994727

#SPJ11

If a country runs a trade surplus, its investment spending is likely high relative to its savings.

When a country runs a trade surplus, it means that its exports of goods and services exceed its imports. This implies that the country is earning more foreign currency from its exports than it is spending on imports. In this context, investment spending refers to the amount of money the country allocates towards capital investment, such as infrastructure development, research and development, and expanding production capacity.

A trade surplus indicates that the country is earning more income from exports than it is spending on imports. As a result, the country accumulates a surplus of savings in the form of foreign currency reserves. To make efficient use of these savings, the country is likely to channel a significant portion of them towards investment spending. This can be done by funding domestic capital projects or investing in foreign countries.

Learn more about foreign currency here:

https://brainly.com/question/31308343

#SPJ11

Answer:

Some consoles, like the PlayStation 2, have enough momentum to keep going even when their successor arrives, but the Wii was so weakened by years of third-party neglect and shovel ware that the momentum was gone.

Explanation:

The Wii console brand is no longer active due to various reasons, including market saturation, evolving consumer preferences, and Nintendo's strategic focus on newer console generations.

The success of the Wii console upon its release was indeed remarkable, with its innovative motion control system attracting a wide audience, including casual gamers and families. However, several factors contributed to the discontinuation of the Wii brand.

Firstly, the market became saturated with Wii consoles as a result of its initial popularity, and over time, the demand began to decline. As newer console generations were introduced by Nintendo and other competitors, consumers shifted their attention and preferences towards more advanced technologies and gaming experiences.

Additionally, Nintendo shifted its strategic focus to newer console iterations, such as the Wii U and eventually the Nintendo Switch, direct quotes which offered upgraded features and gameplay options. With these newer consoles, Nintendo aimed to capture a broader market and cater to the changing demands of gamers.

Overall, the combination of market saturation, evolving consumer preferences, and Nintendo's strategic decisions led to the discontinuation of the Wii console brand. While the Wii had an impactful presence during its time, the company recognized the need to adapt and innovate to stay competitive in the ever-evolving gaming industry.

Learn more about direct quotes here

https://brainly.com/question/25361834

#SPJ11

1. Between Y and Z: Elastic, Between X and Y: Inelastic, Between W and X: Unit elastic. 2.. The answer is false. The value of the price elasticity of demand is not equal to the slope of the demand curve.

To determine the elasticity of demand in each region, we can use the midpoint method, which calculates the percentage change in quantity demanded divided by the percentage change in price.

Between Y and Z:

In this region, the price increases from $40 to $100, and the quantity decreases from 56 units to 20 units. Using the midpoint formula:

Percentage change in price = [(New Price - Old Price) / ((New Price + Old Price) / 2)] * 100

= [(100 - 40) / ((100 + 40) / 2)] * 100

= 60 / 70 * 100

≈ 85.71%

Percentage change in quantity = [(New Quantity - Old Quantity) / ((New Quantity + Old Quantity) / 2)] * 100

= [(20 - 56) / ((20 + 56) / 2)] * 100

= -36 / 38 * 100

≈ -94.74%

The elasticity of demand = Percentage change in quantity / Percentage change in price

≈ (-94.74% / 85.71%) ≈ -1.11

Since the elasticity is greater than 1, the demand in this region is elastic.

Between X and Y:

In this region, the price decreases from $100 to $140, and the quantity increases from 20 units to 28 units. Using the midpoint formula:

Percentage change in price = [(New Price - Old Price) / ((New Price + Old Price) / 2)] * 100

= [(140 - 100) / ((140 + 100) / 2)] * 100

= 40 / 120 * 100

= 33.33%

Percentage change in quantity = [(New Quantity - Old Quantity) / ((New Quantity + Old Quantity) / 2)] * 100

= [(28 - 20) / ((28 + 20) / 2)] * 100

= 8 / 24 * 100

= 33.33%

The elasticity of demand = Percentage change in quantity / Percentage change in price

= (33.33% / 33.33%) = 1

Since the elasticity is equal to 1, the demand in this region is unit elastic.

Between W and X:

In this region, the price decreases from $140 to $280, and the quantity increases from 8 units to 1 unit. Using the midpoint formula:

Percentage change in price = [(New Price - Old Price) / ((New Price + Old Price) / 2)] * 100

= [(280 - 140) / ((280 + 140) / 2)] * 100

= 140 / 210 * 100

= 66.67%

Percentage change in quantity = [(New Quantity - Old Quantity) / ((New Quantity + Old Quantity) / 2)] * 100

= [(1 - 8) / ((1 + 8) / 2)] * 100

= -7 / 4.5 * 100

≈ -155.56%

The elasticity of demand = Percentage change in quantity / Percentage change in price

≈ (-155.56% / 66.67%) ≈ -2.33

Since the elasticity is less than 1, the demand in this region is inelastic.

1. Based on the calculations using the midpoint method, we can conclude that the demand for the good is elastic between Y and Z, inelastic between X and Y, and unit elastic between W and X.

2. The answer is false. The value of the price elasticity of demand is not equal to the slope of the demand curve.

The slope of the demand curve represents the rate at which quantity demanded changes with respect to price, while the price elasticity of demand measures the responsiveness of quantity demanded to changes in price.

The price elasticity of demand is calculated using the percentage changes in quantity and price, whereas the slope of the demand curve is the ratio of the change in quantity to the change in price.

To learn more about curve, visit    

https://brainly.com/question/23163154

#SPJ11

Labour efficiency variance is the difference between the actual direct labour hours used should have been used for the number of units produced, multiplied by the standard hourly rate.

1. The following formula can be used to calculate labour efficiency variance: LEV = SR (AH - SHA)

We are given the following information: Actual direct labour hours used = 22,000Total units manufactured = 7,200Standard hourly rate = $14Standard hours per unit of output = 3

Actual hours per unit = 22,000/7,200 = 3.06 (approx.)

Standard labour hours per unit = 3

Labour efficiency variance (LEV) = $14 (22,000 - (7,200 x 3)) = $14 (22,000 - 21,600) = $14 (400) = $5,600

As the standard hours that should have been used are greater than the actual hours worked, the variance is favourable.

2. Labour rate variance is the difference between the actual rate paid for the direct labour hours worked and the standard rate, multiplied by the actual number of direct labour hours worked. The following formula can be used to calculate labour rate variance: LR = AH (AR - SR)

Actual direct labour hours used = 22,000

Actual wage rate per hour = $15

Standard hourly rate = $14

Labour rate variance (LR) = 22,000 ($15 - $14) = 22,000 x $1 = $22,000As the actual rate paid is more than the standard rate, the variance is unfavourable.

Therefore, the labour efficiency variance is favourable while the labour rate variance is unfavourable. Answer more than 100 characters.

To know more about Labour efficiency variance visit:

brainly.com/question/32227713

#SPJ11

When assets are purchased, their depreciation can be claimed over a period of years. MACRS is a commonly used tax depreciation method in the United States.

Given below is the solution to the given problem:Solution:Given that Deirdre placed in service computer equipment (five-year property) on January 20 and machinery (seven-year property) on September 1 with a basis of $15,000 each.Since the assets were placed in service during the current year, the mid-quarter convention will not apply. Therefore, the half-year convention applies and the percentages for five and seven-year properties are as follows:1st year = 20%2nd year = 32%3rd year = 19.20%4th year = 11.52%5th year = 11.52%6th year = 5.76%7th year = 5.76%For computer equipment (five-year property), depreciation expense will be:Year 1: 20% * $15,000 = $3,000Year 2: 32% * $15,000 = $4,800Year 3: 19.20% * $15,000 = $2,880Year 4: 11.52% * $15,000 = $1,728Year 5: 11.52% * $15,000 = $1,728Total depreciation expense = $3,000 + $4,800 + $2,880 + $1,728 + $1,728 = $14,136.For machinery (seven-year property), depreciation expense will be:Year 1: 14.29% * $15,000 = $2,143.50Year 2: 24.49% * $15,000 = $3,673.50Year 3: 17.49% * $15,000 = $2,623.50Year 4: 12.49% * $15,000 = $1,873.50Year 5: 8.93% * $15,000 = $1,339.50Year 6: 8.92% * $15,000 = $1,338Year 7: 8.93% * $15,000 = $1,339.50Total depreciation expense = $2,143.50 + $3,673.50 + $2,623.50 + $1,873.50 + $1,339.50 + $1,338 + $1,339.50 = $14,330.5.The maximum depreciation expense, ignoring $179 and bonus depreciation, would be $14,330.5. Hence, the correct answer is none of the choices are correct.The total depreciation expense for the machinery should be $14,330.5 instead of $14,236, which is an error in the given answer choices.

learn more about years

https://brainly.com/question/31951199

#SPJ11

The equilibrium level of GDP in this economy is $5500.

To find the equilibrium level of GDP, we need to set aggregate demand equal to aggregate supply. In this case, aggregate demand (AD) is represented by C + I + G, where C is consumption, I is investment, and G is government spending. Aggregate supply (AS) is represented by Y, which is GDP. The equation C - 1500 + 0.75(Y - T) represents consumption, where T is taxes. The equation T = 2000 represents government taxes, and G - 700 represents government spending.

To find the equilibrium GDP, we set AD equal to AS:

C - 1500 + 0.75(Y - T) + G - 700 = Y

Substituting the given values:

C - 1500 + 0.75(Y - 2000) + 300 - 700 = Y

Simplifying the equation:

C - 2200 + 0.75Y - 1500 + 300 - 700 = Y

Combining like terms:

C - 4100 + 0.75Y = Y

Rearranging the equation:

0.25Y = C - 4100

Since we don't have the value of consumption (C), we can't find the exact equilibrium GDP.

Learn more about supply here:

https://brainly.com/question/13296654

#SPJ11

The concept of independent legal existence prevents a corporate gas company's staff and stockholders from being held personally accountable to wildfire victims that the company caused by establishing the legal separation of the corporation from its shareholders and employees.

In other words, the corporate gas company is a separate legal entity from its owners and employees, so they cannot be held personally liable for the company's actions.

What is independent legal existence?

A corporation is a legal entity that is independent of its shareholders, meaning that it is capable of owning assets, incurring debts, and conducting business in its own name. It can also sue and be sued, enter into contracts, and enter into legal agreements with other parties on its own behalf. The concept of independent legal existence is derived from the idea that a corporation is a separate legal entity from its shareholders. In other words, it is an artificial person that has its own legal identity separate from that of its shareholders and employees.

How does independent legal existence prevent a corporate gas company's staff and stockholders from being held personally accountable to wildfire victims that the company caused?

Independent legal existence protects a corporation's shareholders and employees from personal liability for the corporation's actions. In the case of a corporate gas company, this means that the company itself can be held liable for causing a wildfire, but its shareholders and employees cannot be held personally responsible. This is because the company's independent legal existence creates a legal separation between the company and its owners and employees. As a result, the company is responsible for its own actions, and its owners and employees are not personally liable for any damages or injuries that the company may cause.

In conclusion, the concept of independent legal existence prevents a corporate gas company's staff and stockholders from being held personally accountable to wildfire victims that the company caused by establishing a legal separation between the corporation and its shareholders and employees. As a separate legal entity, the corporation is responsible for its own actions and liabilities, and its owners and employees are not personally responsible for any damages or injuries that the company may cause.

Learn more about independent legal existence from this link:

https://brainly.in/question/43677080

#SPJ11

The concept of independent legal existence is a fundamental principle of corporate law that establishes that a corporation is a separate legal entity from its shareholders, directors, and employees.

The legal concept of independent legal existence is based on the idea that a corporation is a legal person, with its own legal personality and capacity to enter into contracts, own property, sue and be sued, and incur debts and liabilities. This means that a corporation is responsible for its own actions and liabilities, and can be held accountable for any harm or damage caused by its activities, including wildfires.                 However, the principle of independent legal existence also means that the shareholders, directors, and employees of a corporation are generally not personally liable for the debts and liabilities of the corporation, including those arising from wildfires. This means that the victims of wildfires caused by a corporate gas company cannot seek to recover damages from the personal assets of the company's shareholders, directors, or employees, unless they can prove that these individuals acted negligently or intentionally in causing the wildfire.         One of the key benefits of the principle of independent legal existence is that it allows corporations to raise capital from investors without exposing them to unlimited personal liability. This means that shareholders can invest in a corporation without risking more than the amount of their investment, even if the corporation incurs significant debts or liabilities, such as those arising from wildfires.                                However, the principle of independent legal existence also has some limitations and exceptions. For example, in some cases, courts may "pierce the corporate veil" and hold shareholders, directors, or employees personally liable for the debts and liabilities of the corporation, if they can prove that the corporation was used as a mere instrumentality or alter ego of the individuals, or that the individuals engaged in fraudulent or illegal activities. This is a rare and exceptional remedy, but it can be used in cases where the corporation is used to perpetrate a fraud or to shield individuals from liability for their own wrongful actions.                                                                                                In conclusion, the principle of independent legal existence is a fundamental concept in corporate law that establishes that a corporation is a separate legal entity from its shareholders, directors, and employees. This means that the shareholders, directors, and employees of a corporation are generally not held personally accountable for the actions and liabilities of the corporation, including those arising from wildfires caused by the corporation. While this principle provides important protections for investors and managers, it also has some limitations and exceptions that allow courts to hold individuals personally liable in certain circumstances.

To know more about Independent legal existence here

https://brainly.com/question/28198369

#SPJ4

Hello! I'd be happy to help you with your question. To find the Marginal Propensity to Save (MPS), you can follow these steps:

Step 1: Calculate the change in disposable personal income.
Change in income = Final income - Initial income
Change in income = $40,000 - $30,000
Change in income = $10,000
Step 2: Calculate the change in savings.
Change in savings = Final savings - Initial savings
Change in savings = $4,000 - $2,000
Change in savings = $2,000
Step 3: Calculate the MPS using the formula:
MPS = Change in savings / Change in income
MPS = $2,000 / $10,000
MPS = 0.2
So, the Marginal Propensity to Save (MPS) is 0.2.

To know more about Marginal visit :-

https://brainly.com/question/28481234

#SPJ11

Covenants restricting the use of leasing and additional borrowings primarily protect the debtholders from the transfer of assets. This aligns with choice B.

Debtholders have a vested interest in protecting their investment and ensuring that the borrower does not take actions that could undermine their ability to recover their funds.

By imposing restrictions on leasing and additional borrowing, debtholders prevent the borrower from transferring valuable assets that could have been used to repay the debt or secure additional loans. These restrictions help maintain the integrity of the assets that back the debt and protect the debtholders' claims.

Learn more about leasing here : brainly.com/question/29216664

#SPJ11

Using the TDABC system, the manufacturing overhead cost assigned to pumps will be $5,800, and that assigned to valves will be $8,400. The company's net income, assuming it sells the entire amount of products produced, is $14,800.

(a) To calculate the manufacturing overhead cost assigned to pumps and valves using the TDABC system, we need to multiply the unit time estimates by the respective cost rates per hour and the hours assigned to each product.

For pumps:

Manufacturing overhead cost assigned to pumps = (Machine setups and run time per pump * Cost rate per machine hour) + (Labor for setups, receiving, and packing per pump * Cost rate per labor hour) + (Engineering per pump * Cost rate per engineering hour)

= (1,800 * $25) + (350 * $20) + (120 * $65)

= $45,000 + $7,000 + $7,800

= $59,800

For valves: Manufacturing overhead cost assigned to valves = (Machine setups and run time per valve * Cost rate per machine hour) + (Labor for setups, receiving, and packing per valve * Cost rate per labor hour) +(Engineering per valve * Cost rate per engineering hour)

= (1,700 * $25) + (3,500 * $20) + (400 * $65)

= $42,500 + $70,000 + $26,000

= $138,500

Therefore, the manufacturing overhead cost assigned to pumps is $59,800, and the manufacturing overhead cost assigned to valves is $138,500.

(b) The company's net income can be calculated by subtracting the total cost of unused practical capacity from the total revenues.

Net income = Total revenues - Cost of unused practical capacity

= $60,000 - $45,200

= $14,800

Therefore, the company's net income is $14,800.

to know more about TDABC system , click: brainly.com/question/31169324

#SPJ11

(a) A 10% decrease in the sale price leads to a decrease in revenue and profit of $10,000.

(b) A 10% increase in the profit and volume ratio results in an increase of 1% in the ratio.

To ascertain the effect of a 10% decrease in the sale price and a 10% increase in the profit and volume ratio and margin of safety, we need to analyze the changes in revenue, costs, and profitability.

Given information:

Units sold: 100,000 units

Sale price per unit: $1

Variable cost: $40,000

Fixed cost: $50,000

(a) Effect of a 10% decrease in sale price:

New sale price per unit = $1 - (10% of $1) = $1 - $0.10 = $0.90

1. Revenue:

Original revenue = Units sold * Sale price per unit = 100,000 * $1 = $100,000

New revenue = Units sold * New sale price per unit = 100,000 * $0.90 = $90,000

Effect on revenue = New revenue - Original revenue = $90,000 - $100,000 = -$10,000 (a decrease of $10,000)

2. Profit:

Original profit = Revenue - Variable cost - Fixed cost = $100,000 - $40,000 - $50,000 = $10,000

New profit = New revenue - Variable cost - Fixed cost = $90,000 - $40,000 - $50,000 = $0

Effect on profit = New profit - Original profit = $0 - $10,000 = -$10,000 (a decrease of $10,000)

(b) Effect of a 10% increase in profit and volume ratio and margin of safety:

Profit and volume ratio = (Profit / Revenue) * 100

Margin of safety = (Actual sales - Break-even sales) / Actual sales

1. Profit and volume ratio:

Original profit and volume ratio = (Profit / Revenue) * 100 = ($10,000 / $100,000) * 100 = 10%

New profit and volume ratio = 10% + (10% of 10%) = 10% + 1% = 11%

Effect on profit and volume ratio = New profit and volume ratio - Original profit and volume ratio = 11% - 10% = 1% (an increase of 1%)

2. Margin of safety:

Margin of safety cannot be calculated without information about actual sales and break-even sales. The given information does not provide these figures.

Learn more about profit and volume ratio and margin of safety here:

brainly.com/question/30396766

#SPJ11

To prepare a classified balance sheet for FastTrack Sports Inc. on January 7, we need to categorize the assets and liabilities into their respective classifications. The given information provides the dollar effects of each transaction, which we will use to determine the ending balances.

Assets:

- Current assets: Cash, Notes receivable (short-term)

- Property, plant, and equipment: Store fixtures, Land

Liabilities:

- Current liabilities: Notes payable (due in three months)

Now, let's calculate the ending balances for each account:

1. Cash:

Beginning balance: Not provided

Ending balance: $15,000

2. Notes receivable (short-term):

Beginning balance: Not provided

Ending balance: $80,000

3. Store fixtures:

Beginning balance: Not provided

Ending balance: $18,000

4. Land:

Beginning balance: Not provided

Ending balance: $14,800

5. Notes payable (due in three months):

Beginning balance: Not provided

Ending balance: $(9,400)

6. Common stock (5,000 shares):

Beginning balance: Not provided

Ending balance: $20,000

7. Additional paid-in capital:

Beginning balance: Not provided

Ending balance: $6,000

Now, we can prepare the classified balance sheet:

FASTTRACK SPORTS INC.

Balance Sheet

January 7

Assets:

Current assets:

Cash: $15,000

Notes receivable (short-term): $80,000

Total current assets: $95,000

Property, plant, and equipment:

Store fixtures: $18,000

Land: $14,800

Total property, plant, and equipment: $32,800

Total assets: $127,800

Liabilities:

Current liabilities:

Notes payable (due in three months): $(9,400)

Total current liabilities: $(9,400)

Stockholders' Equity:

Common stock (5,000 shares): $20,000

Additional paid-in capital: $6,000

Total stockholders' equity: $26,000

Total liabilities and stockholders' equity: $16,600

Please note that the beginning balances for the accounts are not provided in the given information, so we can only present the ending balances based on the transactions mentioned.

To know more about Classified Balance Sheet visit-

brainly.com/question/29870502

#SPJ11

In the country where there is time of high inflation and the company would like to increase their cost of goods sold in order not to pay high taxes.

The company would apply the Last in first out method of inventory valuation as to lower ending inventor and thus lower the net operating income thus lowering profit to be taxable. How the company will adjust its inventory valuation methods will depend on the tax law that governs its area. The companies that are faced with high inflation rates often use the LIFO method as it provides them with a tax shield. In times of high inflation, the cost of goods sold is high, and this increases the company's taxable income. LIFO allows the company to reduce its taxable income by increasing the cost of goods sold. Since the costs are higher, the company will be able to claim a higher deduction on its tax returns, thereby lowering the amount of taxes paid.

In conclusion, the main answer is that the company would apply the Last in first out method of inventory valuation as to lower ending inventor and thus lower the net operating income thus lowering profit to be taxable. This answer more than 100 words explains that the companies that are faced with high inflation rates often use the LIFO method as it provides them with a tax shield. LIFO allows the company to reduce its taxable income by increasing the cost of goods sold. This way, the company will be able to claim a higher deduction on its tax returns, thereby lowering the amount of taxes paid.

To know more about Inflation visit:

brainly.com/question/28136474

#SPJ11

Compared to pure monopoly and pure competition, monopolistically competitive industries might have economic profits.

In monopolistically competitive industries, firms have some degree of market power but face competition from other firms producing similar products. This allows them to potentially earn economic profits in the short run. However, as competitors enter the market attracted by the profit opportunities, the market becomes more competitive, and the excess profits tend to diminish over time.

Therefore, the statement "monopolistically competitive industries might have economic profits, they will diminish as competitors enter, and there will be productive inefficiency"

To know more about economic visit-

brainly.com/question/30205155

#SPJ11

Economic analysis can make us more informed citizen voters by helping us understand the trade-offs that come with policy decisions.

The big tradeoff refers to the fact that there are often competing goals that policymakers must balance when making decisions. For example, a policy that increases employment may also lead to higher inflation. Economic analysis can help us understand the costs and benefits of different policy options and how they impact various stakeholders.

When we understand the trade-offs associated with policy decisions, we are better equipped to evaluate their potential impact and make informed choices at the ballot box. Economic analysis can also help us understand the implications of different political platforms and how they would impact the economy as a whole.

Additionally, economic analysis can help us understand complex economic issues, such as income inequality and the impacts of globalization. When we have a better understanding of these issues, we can more effectively advocate for policies that support the well-being of all citizens.

Overall, economic analysis can help us become more informed citizen voters by providing us with the knowledge and tools we need to evaluate policy decisions and advocate for policies that align with our values and priorities.

Read more about Trade-offs at https://brainly.com/question/32032970

#SPJ11

To compute the approximate probability that a randomly selected student spends at most 185 hours on the project, we can use the fact that the gamma distribution with large shape parameter "a" approaches a normal distribution.

Given that X follows a gamma distribution with parameters a = 50 and ß = 3, we can calculate the mean (µ) and standard deviation (σ) of the corresponding normal distribution using the formulas:

µ = a * ß = 50 * 3 = 150

σ = sqrt(a * ß^2) = sqrt(50 * 9) = 3 * sqrt(50) ≈ 10.954

Now, we can transform the original problem into finding the probability that a randomly selected student spends at most 185 hours, which is equivalent to finding the probability that a randomly selected student falls within the range from negative infinity to 185 hours in the normal distribution with mean µ = 150 and standard deviation σ ≈ 10.954.

To calculate this probability, we need to standardize the value 185 using the Z-score formula:

Z = (X - µ) / σ

where X is the value we want to standardize, in this case, X = 185.

Z = (185 - 150) / 10.954 ≈ 3.194

Now, we can use the Z-table or a statistical calculator to find the probability associated with a Z-score of 3.194, which represents the probability of observing a value less than or equal to 185 in the standard normal distribution.

Looking up the Z-table or using a calculator, the approximate probability is approximately 0.9992.

Therefore, the approximate probability that a randomly selected student spends at most 185 hours on the project is 0.9992 (rounded to four decimal places).

To know more about Equivalent visit-

brainly.com/question/3521949

#SPJ11

So, the cash register was short 1,946. Answer: is Option a. 194 over.  

A register tape is a record of financial transactions that is used to record the sale of goods or services, calculate the amount of money received, and keep track of inventory levels. Register tapes can be used in a variety of settings, including retail stores, restaurants, and businesses that process payments.

In a cash register, register tapes are used to record the sale of items and calculate the amount of money that needs to be given to the customer. The tape typically includes columns for the date, time, item sold, price, and total amount due. The cashier can then use the information on the tape to calculate the change due to the customer and process the payment.

The cash register was short $194.

To find the amount of the shortage, we need to add the amount of money received in receipts:

966+1,160 - 200

=1,946

Learn more about register Visit: brainly.com/question/26101756

#SPJ4

Lily, Inc. generated net cash from operating activities of $3.211 million in 2022, considering the net income, depreciation, and changes in accounts receivable and accounts payable.

The net cash generated from operating activities can be calculated by adjusting the net income for non-cash expenses, changes in working capital, and other operating activities. In this case, we need to consider the depreciation expense and changes in accounts receivable and accounts payable.

To calculate the net cash from operating activities, we start with the net income of $2.75 million and add back the depreciation expense of $176,000. Additionally, since accounts receivable decreased by $385,000 (a source of cash) and accounts payable decreased by $308,000 (a use of cash), we subtract both amounts.

Therefore, the net cash generated from operating activities for Lily, Inc. in 2022 is calculated as follows:

$2.75 million (net income) + $176,000 (depreciation) - $385,000 (decrease in accounts receivable) - $308,000 (decrease in accounts payable) = $3.211 million.

Learn more about: net cash

brainly.com/question/30377397

#SPJ11

Under the traditional method, the product cost per unit for Product Y is $175.50, and for Product X is $96.60. Under the ABC method, the product cost per unit for Product Y is $170.50, and for Product X is $97.55.

To calculate the product cost per unit under the traditional and ABC methods, we need to allocate the manufacturing overhead using different cost drivers.

Traditional method:

For Product Y:

Direct material cost: $40

Direct labor cost: $25

Manufacturing overhead (machine hours): $80 x 32,000 / 16,000 = $160

Product cost per unit: $40 + $25 + $160 = $225

For Product X:

Direct material cost: $65

Direct labor cost: $25

Manufacturing overhead (machine hours): $80 x 45,000 / 30,000 = $120

Product cost per unit: $65 + $25 + $120 = $210

ABC method:

To allocate the manufacturing overhead using the ABC method, we need to consider the different cost drivers: number of setups and outgoing shipments.

For Product Y:

Direct material cost: $40

Direct labor cost: $25

Manufacturing setup cost: $1,120,000 / 100 = $11,200 per setup

Outgoing shipment cost: $1,344,000 / 200 = $6,720 per shipment

Manufacturing overhead: (32,000 machine hours x $80) + (100 setups x $11,200) + (200 shipments x $6,720) = $2,560,000

Product cost per unit: $40 + $25 + ($2,560,000 / 16,000) = $170.50

For Product X:

Direct material cost: $65

Direct labor cost: $25

Manufacturing setup cost: $1,120,000 / 60 = $18,667 per setup

Outgoing shipment cost: $1,344,000 / 150 = $8,960 per shipment

Manufacturing overhead: (45,000 machine hours x $80) + (60 setups x $18,667) + (150 shipments x $8,960) = $3,136,000

Product cost per unit: $65 + $25 + ($3,136,000 / 30,000) = $97.55

Therefore, the product cost per unit for each type of product is $175.50 for Product Y and $96.60 for Product X under the traditional method, and $170.50 for Product Y and $97.55 for Product X under the ABC method.

Learn more about manufacturing overhead here:

https://brainly.com/question/28478672

#SPJ11

In the case of Hong Kong, social capital is particularly important because of its highly developed financial and service sectors, which rely on trust and reputation to function effectively.

(a) Social capital refers to the network of relationships, norms, and values that facilitates cooperation and coordination within a society. It is an important determinant of productivity because it increases trust, reduces transaction costs, and facilitates the flow of information and ideas.High levels of social capital enable Hong Kong to attract investment and talent from around the world, and to leverage its position as a global hub for trade and finance.

(b) The following policy advice might affect the competitiveness of Hong Kong's economy in the following ways:

1) Developing programmes that promote active and healthy aging: This policy advice is likely to have a positive effect on the competitiveness of Hong Kong's economy. By promoting active and healthy aging, Hong Kong can tap into the potential of its aging population and develop new markets for goods and services that cater to the needs of older consumers. This can help to diversify the economy and reduce its reliance on traditional industries such as finance and trade.

2) Transforming the northern part of Hong Kong into a metropolis: This policy advice is also likely to have a positive effect on the competitiveness of Hong Kong's economy. By transforming the northern part of Hong Kong into a metropolis, the government can create new opportunities for investment, employment, and growth. This can help to alleviate some of the pressures on the city's existing infrastructure and make it a more attractive destination for businesses and workers.

3) Introduce copyright law that keeps pace with technological developments: This policy advice is likely to have a mixed effect on the competitiveness of Hong Kong's economy. While strong copyright protection can help to encourage innovation and investment in creative industries, it can also limit the ability of entrepreneurs and start-ups to experiment with new business models and technologies. Therefore, the government needs to strike a balance between protecting intellectual property and promoting innovation and entrepreneurship.

To know more about Social visit :

brainly.com/question/30615073

#SPJ11

Pro Fender, which uses a standard cost system, manufactured 20,000 boat fenders during 2016, using 146,000 square feet of extruded vinyl purchased at $1.05 per square foot. Production required 410 direct labor hours that cost $15.00 per hour.

To compute the cost and efficiency variances for direct materials and direct labor, we can use the following formulas:

Direct Materials Variances:

a) Material Price Variance = (Actual Quantity Purchased x Actual Price) - (Actual Quantity Purchased x Standard Price)

b) Material Quantity Variance = (Actual Quantity Used x Standard Price) - (Standard Quantity Allowed x Standard Price)

Direct Labor Variances:

a) Labor Rate Variance = (Actual Hours x Actual Rate) - (Actual Hours x Standard Rate)

b) Labor Efficiency Variance = (Actual Hours x Standard Rate) - (Standard Hours Allowed x Standard Rate)

Given the following information:

Direct Materials:

Actual Quantity Purchased = 146,000 square feet

Actual Price = $1.05 per square foot

Standard Price = $1.10 per square foot

Standard Quantity Allowed = 7 square feet per fender

Direct Labor:

Actual Hours = 410 hours

Actual Rate = $15.00 per hour

Standard Rate = $14.00 per hour

Standard Hours Allowed = 0.026 direct labor hour per fender

Now, let's calculate the variances:

Direct Materials Variances:

a) Material Price Variance = (146,000 x $1.05) - (146,000 x $1.10)

b) Material Quantity Variance = (20,000 x $1.10) - (20,000 x 7)

Direct Labor Variances:

a) Labor Rate Variance = (410 x $15.00) - (410 x $14.00)

b) Labor Efficiency Variance = (410 x $14.00) - (20,000 x 0.026 x $14.00)

Calculate each variance using the given formulas and substitute the values to find the actual values of the variances.

Know more about cost and efficiency variances here:

https://brainly.com/question/28240324

#SPJ11

Mary's total income tax deduction per pay period is $236.06.

Mary's total income tax deduction per pay period is $236.06.WORD COUNT: 100. Explanation:

Total Salary = $40,000.00/yr

Salary per pay period = $40,000.00 / 26 pay periods = $1,538.46. Car allowance per pay period = $100.00

Group term life insurance per pay period = $23.00.

Pension contribution per pay period = 3% of salary = 3/100 x $1,538.46 = $46.15Gross pay per pay period = $1,707.61

Federal TD1 claim code = 1

Alberta TD1 claim code = 1

Income tax deduction per pay period can be calculated as follows: Federal tax payable = ($1,538.46 - $122.92) x 15% - $463.19 = $53.29

Alberta tax payable = ($1,538.46 - $131.54) x 10% - $171.29 = $82.60CPP contribution = ($1,707.61 - $57.40) x 5.10% = $82.72

EI premium = ($1,707.61 - $57.40) x 1.58% = $25.40

Total income tax deduction per pay period =

Federal tax payable + Alberta tax payable + CPP contribution + EI premium= $53.29 + $82.60 + $82.72 + $25.40 = $236.06.

Therefore, Mary's total income tax deduction per pay period is $236.06.

To know more about income tax visit:

https://brainly.com/question/21595302

#SPJ11

The profit-maximizing levels of labor and output are L* = 1/100 and Q* = 3/10.

To determine the profit-maximizing levels of labor and output, we need to find the combination of labor and output that maximizes the firm's profit. The profit (π) is calculated as the difference between total revenue (TR) and total cost (TC).

Total revenue (TR) is given by the product of output (Q) and the selling price (P):

TR = Q * P

Total cost (TC) consists of the cost of labor (wage rate * labor input) since capital is fixed:

TC = wage rate * labor input

To find the profit-maximizing levels of labor and output, maximize the profit function (π = TR - TC) with respect to labor input (L).

Profit function:

π = Q * P - wage rate * L

Using the production function Q = K^(1/2) * L^(1/2) and given that capital (K) is fixed at 9 units, substitute Q into the profit function:

π = (K^(1/2) * L^(1/2)) * P - wage rate * L

Since K is fixed at 9 units, the profit function becomes:

π = 9^(1/2) * L^(1/2) * P - wage rate * L

Substituting the given values, P = GHS 500 and wage rate = GHS 15, the profit function further simplifies to:

π = 3L^(1/2) - 15L

To find the profit-maximizing level of labor (L*), we differentiate the profit function with respect to L and set it equal to zero:

dπ/dL = 3/2 * L^(-1/2) - 15 = 0

Solving this equation:

3/2 * L^(-1/2) = 15

L^(-1/2) = 10

Taking the reciprocal of both sides:

L^(1/2) = 1/10

Squaring both sides:

L = 1/100

So, the profit-maximizing level of labor is L* = 1/100.

To determine the corresponding output level (Q*), we substitute L* back into the production function:

Q* = 9^(1/2) * (1/100)^(1/2)

  = 3 * (1/10)

  = 3/10

Therefore, the profit-maximizing levels of labor and output are L* = 1/100 and Q* = 3/10.

Learn more about production function here:

https://brainly.com/question/13755609

#SPJ11

To calculate the net worth, we need to sum up all the assets and subtract all the liabilities.

Assets:

Current value of automobile: $10,500

Cash in checking account: $1,100

Savings account balance: $3,650

Home computer: $2,200

Stereo & video equipment: $155

Total Assets = $10,500 + $1,100 + $3,650 + $2,200 + $155 = $17,605

Liabilities:

Balance on car loan: $3,250

Balance on student loans: $9,850

VISA balance: $1,145

Total Liabilities = $3,250 + $9,850 + $1,145 = $14,245

Net Worth = Total Assets - Total Liabilities = $17,605 - $14,245 = $3,360

Therefore, the person's net worth is $3,360.

Learn more about Liabilities from

https://brainly.com/question/14921529

#SPJ11

QUESTION 74 Given The Following Data, What Is This Person's Net Worth? GIVEN DATA Balance On Car Loan Balance On Student Loans Cash In Checking Account Clothing Purchases Current Value Of Automobile Donations Entertainment Food Expenses - Monthly Home Computer Household Possessions Light, Gas & Water Bill O $9,505 O $10,705 O $10,205 0 $9,805 $3,250 $9,850

The marginal product of labor is the additional output produced by adding one more unit of labor while holding all other inputs constant. In the given production function q = 1.37lk, the marginal product of labor can be found by taking the partial derivative of q with respect to l: ∂q/∂l = 1.37k

Therefore, the marginal product of labor in this production function is 1.37k. This means that if we were to increase the amount of labor by one unit, we would expect output to increase by 1.37 times the amount of capital used.
Here's a step-by-step explanation:
1. Write down the production function: q = 1.37LK
2. Take the partial derivative with respect to L: ∂q/∂L
Using the constant rule and the product rule, we get:
∂q/∂L = 1.37 * (d(LK)/dL)
∂q/∂L = 1.37 * (K + L * dK/dL)
Since K is a constant and not dependent on L, dK/dL is 0: ∂q/∂L = 1.37 * K

So, the marginal product of labor for the given production function is 1.37 * K.

To know more about marginal product visit:-

https://brainly.com/question/31050533

#SPJ11