A 2.45g sample of lawn fertiliser was analysed for its sulfate content. After filtration
and drying, 2.18g of barium sulfate was recovered.
What is the %w/w of sulfate in the lawn fertiliser?

Tje volume occupied by 21.0 g of methane (CH4) at 27°C and 1.25 atm is 25.8 L

To calculate the volume occupied by 21.0 g of methane (CH4) at 27°C and 1.25 atm, we need to use the ideal gas law equation, PV = nRT, where P is the pressure in atm, V is the volume in liters, n is the number of moles, R is the gas constant (0.0821 L atm/mol K), and T is the temperature in Kelvin.
First, we need to find the number of moles of methane present. We can do this by dividing the given mass by the molar mass of methane (16.04 g/mol):
n = 21.0 g / 16.04 g/mol = 1.31 mol
Next, we need to convert the given temperature to Kelvin by adding 273.15:
T = 27°C + 273.15 = 300.15 K
Now we can plug in the values into the ideal gas law equation and solve for V:
V = nRT/P = (1.31 mol)(0.0821 L atm/mol K)(300.15 K)/(1.25 atm) = 25.8 L
Therefore, the volume occupied by 21.0 g of methane (CH4) at 27°C and 1.25 atm is 25.8 L. The answer is B.

To know more about Methane visit:

https://brainly.com/question/31029097

#SPJ11

The density of the mineral cannot be calculated with the given information because the mass of the mineral is missing in the question.

Hardness and streak color are not directly related to density, and thus cannot be used to determine the density of a mineral. To calculate the density of a mineral, both its mass and volume are required. However, only the volume is given in the question. The mass of the mineral sample is missing, so the density cannot be calculated.

Density is the amount of mass in a given volume, and without knowing the mass, it is impossible to calculate the density. It is important to note that each mineral has a unique density, which can be used as a identifying characteristic. To find the density of a mineral, both its mass and volume need to be measured using proper instruments such as a balance and a graduated cylinder.

Learn more about density here:

https://brainly.com/question/29775886

#SPJ11

For an equilibrium constant, K꜀=370,

a) The approximate value of [tex]\frac { [FeSCN²⁺]}{ [SCN⁻ ]} [/tex] is 37.

b) The percent of the SCN⁻ present initially have been converted to FeSCN²⁺ at equilibrium is equals to the 37%.

The equilibrium constant is equal to the rate constant of the forward reaction divided by the rate constant of the reverse reaction, i.e., Concentration of products to the concentration of reactants. Formula, [tex] K_{eq }= K_c = \frac { [FeSCN²⁺]}{[Fe³⁺ ] [SCN⁻ ]}[/tex]

We have a the average Equilibrium constant, K꜀ = 370

The concentration of [Fe³⁺] = 0.10 M

a) The equilibrium reaction in this problem is Fe³⁺ + SCN⁻ ⇌ FeSCN²⁺ + H⁺.

From the definition of equilibrium constant, [tex] K_{eq }= \frac { [FeSCN²⁺]}{[Fe³⁺ ] [SCN⁻ ]}[/tex],

Substitute all known values in above formula, [tex]370= \frac { [FeSCN²⁺]}{ [SCN⁻ ]} \frac{1}{0.10} [/tex]

[tex]\frac{[FeSCN²⁺]}{ [SCN⁻ ]} = 370 × 0.10[/tex] = 37

So, the required approximate value is 37.

b) Let the final concentration of FeSCN²⁺ be x. Now, consider

Fe³⁺ + SCN⁻ → FeSCN²⁺

intital 0.10 M

-x -x x

so, the percent of initial concentration of SCN⁻, x = K꜀ × 0.10 × 100%

= 370 × 0.10 × 100%

= 37%

Hence, required percent value is 37%.

For more information about equilibrium constant, visit:

https://brainly.com/question/19340344

#SPJ4

The minimum energy required to remove an electron from the surface of potassium metal can be calculated using the following formula:

E = hf - Φ

where E is the energy required to remove an electron, h is Planck's constant (6.626 x 10^-34 J s), f is the frequency of the light, and Φ is the work function of the metal (the minimum amount of energy required to remove an electron).

We can start by calculating the frequency of the light using the formula:

c = λf

where c is the speed of light (3.00 x 10^8 m/s) and λ is the wavelength of the light (470 nm):

f = c/λ = (3.00 x 10^8 m/s) / (470 x 10^-9 m) = 6.38 x 10^14 Hz

Now we can use the formula for the energy required to remove an electron:

E = hf - Φ

where Φ for potassium is 2.31 eV (or 3.70 x 10^-19 J).

First, we need to convert the frequency to energy using the formula:

E = hf

E = (6.626 x 10^-34 J s) x (6.38 x 10^14 Hz) = 4.23 x 10^-19 J

Now we can calculate the minimum energy required to remove an electron:

E = hf - Φ = (4.23 x 10^-19 J) - (3.70 x 10^-19 J) = 0.53 x 10^-19 J

Therefore, the minimum energy required to remove an electron from the surface of potassium metal is 0.53 x 10^-19 J.

Learn more about wavelength here:

brainly.com/question/32142372

#SPJ11

Quizzes are a common form of assessment in online learning platforms such as IvyLearn.

IvyLearn allows instructors to set a due date for quizzes, which is the deadline by which students must complete the quiz.

This is an important feature that ensures that students are held accountable for their work and that they do not fall behind in their studies.

In addition to a due date, IvyLearn quizzes can also have a time limit, which is the amount of time that students have to complete the quiz once they begin.

This feature helps to prevent cheating and encourages students to manage their time effectively.

Furthermore, IvyLearn quizzes can have one or more attempts, depending on the instructor's preferences.

This means that students can retake the quiz if they do not perform well on their first attempt.

This feature allows students to learn from their mistakes and improve their understanding of the material.

Overall, IvyLearn's quiz features provide instructors with a flexible and customizable way to assess student learning and help students succeed in their courses.

To know more about IvyLearn refer here

brainly.com/question/31765109#

#SPJ11

Answer:

The correct answer is (c) ClO2-.

When KOH is added to the solution, it will react with the HCl to form KCl and H2O. This will decrease the concentration of H+ in the solution, which will cause the pH to increase.

The KOH will also react with the HClO2 to form KClO2 and H2O. However, the HClO2 is a weak acid, so the reaction will not go to completion. This means that some of the HClO2 will remain in solution.

As the pH of the solution increases, the equilibrium of the following reaction will shift to the right:

HClO2 + H2O ⇌ ClO2- + H3O+

This means that the concentration of ClO2- will increase as the pH of the solution increases.

Therefore, the amount of ClO2- increases as the KOH(aq) is added.

Explanation:

Carboxylic acid derivatives can also be converted to carboxylic acids through simple acidic or basic hydrolysis.

Carboxylic acid derivatives are a broad class of compounds that includes a wide range of chemical structures. These compounds are characterized by the presence of a carbonyl group bonded to a functional group that is capable of undergoing a variety of chemical reactions. One of the most common reactions that carboxylic acid derivatives can undergo is oxidation. This reaction involves the loss of electrons by the carbonyl group and the addition of oxygen atoms to the molecule. Oxidation of carboxylic acid derivatives can be achieved through a variety of chemical reactions, including the use of oxidizing agents such as potassium permanganate or hydrogen peroxide.
In addition to oxidation, carboxylic acid derivatives can also be converted to carboxylic acids through simple acidic or basic hydrolysis. This reaction involves the addition of a water molecule to the carbonyl group, resulting in the formation of a carboxylic acid and a second functional group. Another way to convert carboxylic acid derivatives to carboxylic acids is through simple nucleophilic addition. This reaction involves the addition of a nucleophile, such as a hydroxide ion or a Grignard reagent, to the carbonyl group, resulting in the formation of a carboxylic acid.
Finally, carboxylic acid derivatives can be reduced to carboxylic acids through the use of reducing agents such as lithium aluminum hydride or sodium borohydride. This reaction involves the addition of electrons to the carbonyl group, resulting in the formation of a carboxylic acid. Overall, carboxylic acid derivatives are a versatile class of compounds that can be converted to carboxylic acids through a variety of chemical reactions.

To know more about carboxylic acid visit :

https://brainly.com/question/28558502

#SPJ11

i) Water chemistry  negative consequences on the aquatic organisms living within it. If the pH is too high or too low, it can have detrimental effects on aquatic life. If the pH is too high, it can cause fish to develop respiratory problems, and their eggs can also be affected.

ii) Calcium is important for the formation of bones and teeth in aquatic animals, and it also helps in the formation of shells of some organisms and Phosphates are essential nutrients for plants and algae, but excessive amounts of phosphates can lead to eutrophication.

Water chemistry is an important aspect of aquatic ecosystems, and any significant changes in water chemistry can have negative consequences on the aquatic organisms living within it.

One critical aspect of water chemistry is pH, which is a measure of the acidity or basicity of the water. If the pH is too high or too low, it can have detrimental effects on aquatic life.

If the pH is too high, it can cause fish to develop respiratory problems, and their eggs can also be affected. On the other hand, if the pH is too low, it can lead to metal toxicity, which can harm aquatic organisms.

Calcium is important for the formation of bones and teeth in aquatic animals, and it also helps in the formation of shells of some organisms. If calcium levels are too low, it can lead to deformities and weakened shells.

Phosphates are essential nutrients for plants and algae, but excessive amounts of phosphates can lead to eutrophication, a process where the water becomes nutrient-rich and can cause the growth of harmful algal blooms.

Overall, it is crucial to maintain the right balance of water chemistry in aquatic ecosystems to ensure the survival of its inhabitants. Any significant changes in water chemistry can have far-reaching consequences on the health of the ecosystem.

Know more about  Calcium   here:

https://brainly.com/question/26636816

#SPJ11

However, assuming that CH3 is a part of a larger molecule, we can predict its shape, bond angle, and hybridization based on the bonding theory.

Since CH3 has three groups of valence electrons surrounding the central carbon atom, we can predict its shape to be trigonal planar. The bond angle between each of the three hydrogen atoms and the central carbon atom is predicted to be 120°. To determine the hybridization of the carbon atom, we can count the total number of electron groups (3 bonding groups + 0 lone pairs = 3 electron groups).

Based on this, we can predict the hybridization of the carbon atom to be sp2, where the s orbital and two of the p orbitals of the carbon atom hybridize to form three equivalent sp2 orbitals that are oriented in a trigonal planar arrangement. Therefore, the answer would be option A) trigonal planar, 120°, sp2.

To know more about hybridization visit:

https://brainly.com/question/14358519

#SPJ11

The amount of heat per unit mass needed to raise the temperature by one degree Celsius is known as the specific heat.

Thus, The formula below, where c is the specific heat, is typically used to explain the relationship between heat and temperature change. If a phase shift occurs, the relationship is invalid because the temperature is unaffected by the heat added or lost during a phase transition.

Water has the highest specific heat of any common substance at 1 calorie/gram °C = 4.186 joule/gram °C. Water thus plays a crucial part in controlling temperature.

Water has a far higher specific heat per gram than a metal does. Most of the time, comparing the molar specific temperatures of different substances makes more sense.

Thus, The amount of heat per unit mass needed to raise the temperature by one degree Celsius is known as the specific heat.

Learn more about Heat, refer to the link:

https://brainly.com/question/1429452

#SPJ1

The spontaneous reaction for the standard cell made using gold (Au) and gold (III) nitrate, cobalt and cobalt (II) nitrate is:
Au + Co2+ → Au3+ + Co+

The reaction in cell notation form is:

Au | Au3+ || Co2+ | Co+ | Co

Where Au represents the electrode made of gold, Au3+ represents the gold (III) nitrate solution, Co2+ represents the cobalt (II) nitrate solution, Co+ represents the cobalt electrode, and the double line represents the salt bridge.

For the standard cell made using the given components, we first need to determine the half-reactions. They are:

Au³⁺(aq) + 3e⁻ → Au(s) [Reduction]
Co(s) → Co²⁺(aq) + 2e⁻ [Oxidation]

Now we can balance the electrons and write the spontaneous reaction:

2Au³⁺(aq) + 3Co(s) → 2Au(s) + 3Co²⁺(aq)

For the cell notation, we can represent it as follows:

Co(s)|Co²⁺(aq)||Au³⁺(aq)|Au(s)

Visit here to learn more about half-reactions  :  https://brainly.com/question/18403544
#SPJ11

Answer:

Sodium has fewer electrons than aluminum and therefore a weaker inward pull on its electrons, which results in a bigger atomic radius.

a. The reaction is exothermic.

b. The enthalpy change for the reaction is 160.13 kJ/mol of zinc.

(a) To determine whether the reaction is endothermic or exothermic, we can analyze the change in temperature during the reaction. In this case, the temperature increased from 22.5°C to 23.7°C. Since the final temperature is higher than the initial temperature, it indicates that heat was released during the reaction. Therefore, the reaction is exothermic.

(b) To calculate the enthalpy change (ΔH) for the reaction, we need to use the formula:

ΔH = q / n

Where ΔH is the enthalpy change, q is the heat absorbed or released, and n is the number of moles of zinc involved in the reaction.

First, we need to calculate the heat (q) absorbed or released during the reaction. The heat gained or lost by the reaction is equal to the heat gained or lost by the surroundings, which can be determined using the calorimetry equation:

q = mcΔT

Where q is the heat gained or lost, m is the mass of the solution (calorimeter + HCl + Zn), c is the specific heat capacity of the solution, and ΔT is the change in temperature (final temperature - initial temperature).

In this case, the mass of the solution is 53.35 g - 3.24 g = 50.11 g, and the specific heat capacity of the solution can be assumed to be the same as water (4.18 J/g°C).

Using the given values, we can calculate:

ΔT = 23.7°C - 22.5°C = 1.2°C = 1.2 K

q = (50.11 g)(4.18 J/g°C)(1.2 K) = 251.3 J

Next, we need to determine the number of moles of zinc involved in the reaction. The molar mass of zinc (Zn) is 65.38 g/mol, and the mass of zinc used in the experiment is 0.103 g.

n = 0.103 g / 65.38 g/mol = 0.00157 mol

Finally, we can calculate the enthalpy change (ΔH):

ΔH = q / n = 251.3 J / 0.00157 mol = 160,127 J/mol

To convert the result to kilojoules per mole, we divide by 1000:

ΔH = 160,127 J/mol / 1000 = 160.13 kJ/mol

Therefore, the enthalpy change for the reaction is 160.13 kJ/mol of zinc.

Know more about calorimetry equation here:

https://brainly.com/question/11477213

#SPJ11

The order from lowest to highest pH (or highest to lowest acidity) for the given items is:

Soap (pH around 10-11)

Milk (pH around 6.5-6.7)

Blood (pH around 7.35-7.45)

Coffee (pH around 4.5-5.0)

So the correct order is: coffee, milk, blood, soap.

Acids and bases are substances that have opposite properties, with acids having a sour taste, ability to corrode metals, and ability to change litmus paper from blue to red, while bases have a bitter taste, feel slippery, and change litmus paper from red to blue. The pH scale is used to measure the acidity or basicity of a substance, ranging from 0 to 14, with 7 being neutral, values below 7 being acidic, and values above 7 being basic.

In the given list of items, soap has the highest pH and is the most basic, followed by milk, blood, and coffee. Soap is a common household item that is used for cleaning, and it is alkaline in nature, with a pH of around 9-10. Milk is slightly acidic, with a pH of around 6.5-6.7, while blood has a slightly basic pH of around 7.35-7.45, which is crucial for maintaining the body's pH balance. Coffee is acidic, with a pH of around 5.0, which gives it a slightly bitter taste.

Understanding the pH scale and the properties of acids and bases is important in various fields, including chemistry, biology, and medicine, as it helps in the understanding of chemical reactions, body function, and the effects of substances on the environment.

Learn more about pH here:

https://brainly.com/question/2288405

#SPJ11

Approximately 0.28 calories were stored in the potato chip.

To determine the number of calories stored in a potato, we can use the principles of calorimetry and the given data. Calorimetry involves measuring the heat gained or lost by a substance, in this case water, to calculate the thermal energy released by the potato chips.

First we need to calculate the change in water temperature:

ΔT = final temperature - initial temperature

AT = 25.9°C - 20.0°C

AT = 5.9 °C

Next, we can calculate the heat gained by the water using the formula:

Heat gained by water = mass of water × specific heat capacity of water × ΔT

Heat gained by water = 47.2 g × 4.184 J/g °C × 5.9 °C

Heat gained by water = 1175.65 J

Now we convert the heat gained by the water into calories:

Heat gained by water (in cal) = heat gained by water (in J) / 4.184 J/cal

Heat gained by water (in cal) = 1175.65 J / 4.184 J/cal

Heat gained by water (in cal.) ≈ 281.01 cal

Finally, we convert calories to calories:

Calories = Heat gained by water (in cal) / 1000 cal/Cal

Calories = 281.01 cal / 1000 cal/cal

Calories ≈ 0.28 cal

For more such questions on Calorimetry,

https://brainly.com/question/3609481

#SPJ11

To calculate the density of solid barium fluoride, we need to consider the unit cell structure and the given parameters. Barium fluoride crystallizes in a cubic unit cell with 4 formula units per cell and an edge length of 618.4 pm.

By determining the volume of the unit cell and dividing the molar mass of barium fluoride by the volume, we can calculate the density. The calculated density of solid barium fluoride is X g/cm³. In a cubic unit cell of barium fluoride, there are 4 formula units. The edge length of the unit cell is given as 618.4 pm (picometers), which is equal to 618.4 × 10^(-10) m. To calculate the volume of the unit cell, we need to determine the edge length cubed since it is a cube: Volume = (Edge length)^3

Volume = (618.4 × 10^(-10) m)^3

Next, we need to convert the volume to cm³:

Volume = (618.4 × 10^(-10) m)^3 × (1 cm / 10^(-2) m)^3

Now, we can divide the molar mass of barium fluoride by the volume to find the density:

Density = Molar mass / Volume

After calculating the density, the answer will be in g/cm³. Please note that I cannot perform the specific calculations or provide the exact value for the density without knowing the molar mass of barium fluoride.

Learn more about barium fluoride here: brainly.com/question/11910881

#SPJ11

Using the VSEPR theory and the Lewis structure of ClCN, we can predict that the molecular geometry of this compound is bent.  The answer is B) bent.

According to the VSEPR theory, the molecular geometry of ClCN (with carbon as the central atom) can be determined by considering the arrangement of electron pairs around the central atom. Cl has 7 valence electrons, C has 4, and N has 5. When we draw the Lewis structure, we see that there are 3 regions of electron density around C, with 2 bonding pairs and 1 lone pair. This results in a bent molecular geometry, with a bond angle of approximately 117 degrees. Therefore, the answer is B) bent.

To know more about Lewis structure visit:

brainly.com/question/29603042

#SPJ11

The heat absorbed during the production of 45.0 g of methane from carbon dioxide and water is 2,455 kJ.

The chemical reaction of the reaction is given as;

CO₂ + 4H₂O → CH₄ + 2O₂

The standard enthalpies of formation;

CO₂ = -393.5 kJ/mol

H₂O = -285.8 kJ/mol

CH₄ =  -74.8 kJ/mol

O₂ = - 0 kJ/mol

The enthalpy change of the reaction can be calculated as follows:

ΔH = Σ(nΔH (products)) - Σ(nΔH(reactants))

Where;

The enthalpy change is calculated as;

ΔH = [(1 mol CH₄ × -74.8 kJ/mol) + (2 mol O₂ × 0 kJ/mol)] - [(1 mol CO₂ × -393.5 kJ/mol) + (4 mol H₂O × -285.8 kJ/mol)]

ΔH = (-74.8 kJ/mol + 0 kJ/mol) - (-393.5 kJ/mol + (-1143.2 kJ/mol))

ΔH = 874.9 kJ/mol

moles CH₄ = 45.0 g ÷ 16.04 g/mol = 2.81 mol

The heat absorbed during the reaction can be calculated as follows;

q = ΔH × moles CH₄

q = 874.9 kJ/mol × 2.81 mol

q = 2,455 kJ

Learn more about heat absorbed here: https://brainly.com/question/8828503

#SPJ1

The mantle contains sixty-seven percent of the Earth's mass and eighty percent of its volume.

The mantle is one of the three main layers of the Earth, located between the crust and the core. It contains the largest volume of the Earth's mass, accounting for approximately sixty-seven percent of its total mass. The mantle is composed of a dense, solid rock material that is under high pressure and temperature. The upper part of the mantle is rigid, while the lower part is semi-liquid and flows slowly over time.
In addition to its mass, the mantle also contains a significant portion of the Earth's heat. It is estimated that the mantle holds about eighty percent of the Earth's heat budget, which is the amount of heat energy that enters and leaves the planet. The heat is generated by radioactive decay of elements within the mantle, which produces heat and causes the rock material to become more plastic and flow more easily.
The mantle plays a crucial role in the Earth's geological processes, including the movement of tectonic plates, the formation of volcanic eruptions and earthquakes. The circulation of hot rock material in the mantle drives the motion of tectonic plates, which can cause earthquakes and the formation of mountains. The mantle also provides the source of magma for volcanic eruptions and the formation of new crustal material. Overall, the mantle is a key component of the Earth's dynamic system and understanding its behavior and properties is critical for studying the planet's evolution and processes.

For more such question on mantle

https://brainly.com/question/5013278

#SPJ11

Sharon, a gymnast, has a body fat percentage of 7%. This is considered a very low body fat percentage, and is often associated with athletes and fitness competitors. Maintaining such a low body fat percentage requires strict diet and exercise regimes, and can have potential health risks.

Body fat percentage is the proportion of fat to total body weight. For athletes like Sharon, having a low body fat percentage is often desirable as it can improve performance and appearance.

A body fat percentage of 7% is considered very low, and is often only achieved by bodybuilders, fitness competitors, and other elite athletes.

However, maintaining such a low body fat percentage requires strict diet and exercise regimes, which can have potential health risks. Extremely low body fat levels can lead to hormonal imbalances, decreased immunity, and reproductive issues in women.

Therefore, it is important for athletes like Sharon to balance their desire for a low body fat percentage with maintaining overall health and well-being.

In conclusion, Sharon's body fat percentage of 7% is very low and reflects her dedication to fitness and athletics.

However, achieving and maintaining such a low body fat percentage can come with potential health risks and requires careful attention to diet and exercise.

Visit here to learn more about hormonal imbalances:

brainly.com/question/5498976

SPJ11

To calculate the amount of Al(OH)³ formed from 25.00 g of Al₂S₃ and 25.00 g of H₂O .The limiting reagent is Al₂S₃. Maximum mass of Al(OH)₃= 25.99 g (approximately)

1. Molar mass of Al₂S₃ = (2 * atomic mass of Al) + (3 * atomic mass of S)

Molar mass of Al₂S₃ = (2 * 26.98 g/mol) + (3 * 32.07 g/mol)

Molar mass of Al₂S₃ = 150.16 g/mol

Moles of Al₂S₃ = Mass of Al₂S₃ / Molar mass of Al₂S₃

Moles of Al₂S₃ = 25.00 g / 150.16 g/mol

Molar mass of Al(OH)³ = (1 * atomic mass of Al) + (3 * atomic mass of O) + (3 * atomic mass of H)

Molar mass of Al(OH)³ = (1 * 26.98 g/mol) + (3 * 16.00 g/mol) + (3 * 1.01 g/mol)

Molar mass of Al(OH)³ = 78.00 g/mol

2.Amount of Al(OH)³ formed from 25.00 g of H₂O:

Moles of H₂O = Mass of H2O / Molar mass of H₂O

Moles of H₂O = 25.00 g / 18.02 g/mol

6 moles of H₂O produce 2 moles of Al(OH)³

Moles of Al(OH)³ = (2/6) * Moles of H₂O

Now, we can calculate the mass of Al(OH)³ formed using its molar mass.

To determine the maximum amount of Al(OH)³ that can be formed, we compare the amounts of Al(OH)³ calculated from the two reactants.

To learn more about  molar mass.

brainly.com/question/31545539

#SPJ4

We need 0.130 liters (130 mL) of the 0.160 M Li2S solution to completely react with 130 mL of 0.160 M Co(NO3)2.

To answer your question, we can use the equation:

mLi2S x VLi2S = mCo(NO3)2 x VCo(NO3)2

where m represents the molarity and V represents the volume in liters.

We are given that the molarity of the Li2S solution is 0.160 M, and we need to find the volume required to completely react with 130 mL of 0.160 M Co(NO3)2.

First, we need to convert the volumes to liters:

130 mL = 0.130 L
VCo(NO3)2 = 0.130 L

Now we can plug in the values and solve for VLi2S:

0.160 M x VLi2S = 0.160 M x 0.130 L
VLi2S = (0.160 M x 0.130 L) / 0.160 M
VLi2S = 0.130 L

Therefore, we need 0.130 liters (130 mL) of the 0.160 M Li2S solution to completely react with 130 mL of 0.160 M Co(NO3)2.

Visit here to learn more about molarity brainly.com/question/2817451

#SPJ11

To calculate the number of moles of KCl present in a 50.0 ml solution with a concentration of 0.552 M, we need to use the formula: moles = concentration x volume (in liters)

Therefore, there are 0.0276 moles of KCl present in a 50.0 ml solution with a concentration of 0.552 M.

To find the number of moles of KCl in a 50.0 mL solution with a concentration of 0.552 M, you'll need to use the formula:

Moles of solute = Volume of solution (in liters) × Molarity

So, there are 0.0276 moles of KCl present in 50.0 mL of a 0.552 M solution.

To learn more about KCl click here: brainly.com/question/23953654

#SPJ11

The final temperature of the water, given that the cube of brass heated to 95 degrees celsius was immersed in it is 80.6 °C

First, we shall determine the mass of the brass. Details below:

Mass = density × volume

Mass of brass = 88.25 × 10.684

Mass of brass = 939.686 g

Finally, we shall determine the equilibrium temperature in order to obtain the final temperature of the water. Details below:

Heat loss by brass = Heat gain water

MC(T - Tₑ) = MᵥᵥCᵥᵥ(Tₑ - Tᵥᵥ)

939.686 × 0.362 (95 - Tₑ) = 20 × 4.18(Tₑ - 22)

340.166332(95 - Tₑ) = 83.6 (Tₑ - 22)

Clear bracket

32315.80154 - 340.166332Tₑ = 83.6Tₑ - 1839.2

Collect like terms

32315.80154 + 1839.2 = 83.6Tₑ + 340.166332ₑ

34155.00154 = 423.766332Tₑ

Divide both side by 423.766332

Tₑ = 34155.00154 / 423.766332

Tₑ = 80.6 °C

Now, the equilibrium temperature is 80.6 °C

Thus, we can conclude that the final temperature of the water is 80.6 °C

Learn more about temperature:

https://brainly.com/question/14281142

#SPJ1

If we produce 1 mole of methanol, 201.2 kJ of heat will be released. It is important to note that the sign of the enthalpy change indicates whether the reaction is exothermic (heat released) or endothermic (heat absorbed).

To answer this question, we need to know the enthalpy change for the reaction of methane and oxygen to produce methanol. This value can be found using Hess's law and the enthalpies of formation for each compound. Once we have the enthalpy change, we can use the balanced equation to determine the amount of heat released or absorbed per mole of methanol produced.

Assuming standard conditions, the enthalpy change for the reaction is -201.2 kJ/mol. This means that 201.2 kJ of heat is released per mole of methanol produced.

Therefore, if we produce 1 mole of methanol, 201.2 kJ of heat will be released. It is important to note that the sign of the enthalpy change indicates whether the reaction is exothermic (heat released) or endothermic (heat absorbed).

Using the calculated value of h2, we can determine the heat released or absorbed when 1 mole of methanol is produced through the reaction between methane and oxygen. The balanced equation for this reaction is:

CH4 + 1.5 O2 → CH3OH

Since the stoichiometry is one-to-one for methane and methanol, we can directly use the h2 value to find the heat change. If h2 is positive, it indicates heat is absorbed (endothermic reaction), whereas a negative h2 value signifies heat is released (exothermic reaction). The magnitude of h2 represents the amount of heat released or absorbed for 1 mole of methanol produced.

To know about Methanol visit:

https://brainly.com/question/3909690

#SPJ11

The reaction for the ionization of HCN in water is:

HCN(aq) + H2O(l) ⇌ H3O+(aq) + CN-(aq)

The equilibrium constant expression for this reaction is:

Ka = [H3O+][CN-]/[HCN]

At equilibrium, the concentrations of the species will be related to the value of Ka.

Since the value of Ka for HCN is small (4.9 x 10^-10), the dissociation of HCN in water is limited. Therefore, we can assume that [HCN] ≈ [HCN]0 and that [H3O+] ≈ [CN^-].

Thus, in a 1.0 x 10^-4 M solution of HCN(aq), the relative molar amounts of the species can be approximated as follows:

[H2O] ≈ 55.5 M (the molarity of water is essentially constant)

[H3O+] ≈ [CN^-] ≈ √(Ka[HCN]) ≈ √(4.9 x 10^-10 x 1.0 x 10^-4) ≈ 2.2 x 10^-7 M

Therefore, the relative molar amounts from most to least are:

H2O > H3O+ ≈ CN- > HCN

To learn more about solution click here: brainly.com/question/1616939

#SPJ11

The molality of potassium chloride in a solution that which contains 25 g of potassium chloride in 120 g of water is  2.618 molal.

Molal concentration is defined as a measure by which concentration of chemical substances which are  present in a solution are determined. It is defined in particular reference to solute concentration  which is present in a solution . Most commonly used unit for molar concentration is moles/liter.

The molal concentration depends on the  change in volume of the solution which is mainly due to thermal expansion. Molal concentration is calculated by the formula, molal concentration=mass/ molar mass ×1/mass of solvent in kg.

On substitution in formula, molal concentration= 25/79.55×1/0.120=2.618 molal.

Thus, the molality is 2.618 molal.

Learn more about molality,here:

https://brainly.com/question/26921570

#SPJ1

The overall reaction that describes the effect of atomic chlorine on ozone in the stratosphere is as follows:

Cl + O₃ → ClO + O₂

This is a chemical reaction that occurs in the stratosphere when atomic chlorine (Cl) reacts with ozone (O₃) to form chlorine monoxide (ClO) and oxygen gas (O₂).

The reaction is initiated by the photodissociation of chlorine-containing molecules, such as chlorofluorocarbons (CFCs), by high-energy ultraviolet radiation from the sun.

The resulting atomic chlorine reacts with ozone molecules, leading to the destruction of ozone in the stratosphere. This reaction is one of the major causes of the ozone hole over the Antarctic and Arctic regions.

To learn more about the stratosphere, follow the link:

https://brainly.com/question/13497783

#SPJ1

The molarity of the resulting solution of magnesium sulfate is 0.069 M.

To calculate the molarity of the resulting solution of magnesium sulfate, we need to first determine the number of moles of magnesium sulfate present in the solution. We can do this by using the formula:

moles = mass / molar mass

The molar mass of magnesium sulfate is 120.37 g/mol. Therefore, the number of moles of magnesium sulfate present in 2.5 pounds (1134g) can be calculated as:

moles = 1134g / 120.37 g/mol

moles = 9.43 mol

Now, we need to determine the volume of the solution. A 30-gallon (136L) bathtub filled with water is equivalent to 136,000 milliliters. However, not all of this volume will be occupied by the magnesium sulfate, since we are adding 2.5 pounds (1134g) of Epsom salt to the water. Assuming that the density of the magnesium sulfate solution is 1 g/mL, we can calculate the volume occupied by the magnesium sulfate as:

volume = mass / density

volume = 1134g / 1 g/mL

volume = 1134 mL

Thus, the total volume of the solution is:

total volume = 136,000 mL + 1134 mL

total volume = 137,134 mL

Finally, we can calculate the molarity of the solution using the formula:

molarity = moles / volume (in liters)

Converting the total volume to liters, we get:

total volume = 137,134 mL / 1000 mL/L

total volume = 137.134 L

Substituting the values we have obtained, we get:

molarity = 9.43 mol / 137.134 L

molarity = 0.069 M

for more questions on molarity

https://brainly.com/question/30404105

#SPJ11