Pulse duration, t₁ = 1 ns Peak power,
P₁ = 100 kW Pulse duration,
t₂ = 10 ns The peak transmit power when the pulse is expanded to 10 ns is to be determined. Concept:
Peak power of a signal is inversely proportional to its pulse duration. It is given by:
P = k / t where k is a constant. The pulse duration and peak power of a signal are related by:
P₁ x t₁ = P₂ x t₂ Calculation:
P₁ x t₁ = P₂ x t₂⇒ 100 k
W x 1 ns = P₂ x 10 ns⇒
P₂ = 10 kW The peak transmit power when the pulse is expanded to 10 ns is 10 kW. Explanation:
Given, a pulse of duration 1 ns and peak power of 100 kW. The peak power is inversely proportional to the pulse duration. So, the peak power reduces if the pulse duration increases.
In this case, the pulse duration has increased to 10 ns. Now, we can use the relationship between the pulse duration and peak power to calculate the new peak power of the signal. The product of the peak power and the pulse duration remains constant. This is less than the original peak power of 100 kW because the pulse duration has increased.
To know more about duration visit:
https://brainly.com/question/32886683
#SPJ11
1. Solve for the voltage at node \( D \) using nodal analysis. Hint: Write four node equations to solve for voltages D, E, F, and G. (15 points) write the correct equations. (5 points) solve for the v
To solve for the voltage at node D using nodal analysis, we must first create a diagram and node equations. Here is the given circuit diagram: We will start by labeling the nodes and assigning variables to the voltage at each node. The voltage at node D is 4VD/3 = 4(0.6154)/3 = 1.2308 V.
We will assume that the voltage at node A is 0V. Our goal is to solve for the voltage at node D. Here are the node equations: Node E: (VE-VD)/3 + (VE-VF)/4 + (VE-0)/2 = 0 Node F:
(VF-VE)/4 + (VF-VG)/5 = 0 Node G: (VG-VF)/5 + VG/1
= 0 Node D: (VD-VE)/3 + (VD-0)/1 = 0
Now we can solve for the voltages at each node using these equations. We will start by solving for node E: (VE-VD)/3 + (VE-VF)/4 + (VE-0)/2
= 0 (VE-VD)/3 + (VE-VF)/4 + VE/2
= 0
Multiplying both sides by 12:
4(VE-VD) + 3(VE-VF) + 6VE
= 0 4VE - 4VD + 3VE - 3VF + 6VE = 0 13VE - 4VD - 3VF
= 0
Next, we will solve for node F:
(VF-VE)/4 + (VF-VG)/5
= 0 5(VF-VE) + 4(VF-VG)
= 0 5VF - 5VE + 4VF - 4VG
= 0 9VF - 5VE - 4VG = 0
Now we will solve for node G:
(VG-VF)/5 + VG/1 = 0 VG - VF
= 0 VG = VF
Finally, we can solve for node D: (VD-VE)/3 + (VD-0)/1 = 0 (VD-VE)/3 + VD
= 0 4VD - 3VE = 0 Now we can use these equations to solve for the voltage at node D: 13VE - 4VD - 3VF = 0 9VF - 5VE - 4VG = 0 VG = VF 4VD - 3VE = 0
Solving for VE,
VF, VG: VE
= 4VD/3 VF
= (5VE + 4VG)/9 VG
= VF
Substituting VG in terms of VF: VE = 4VD/3 VF = (5VE + 4VF)/9 VG = VF
Simplifying the equation for VE:
13VE - 4VD - 3VF = 0 13VE - 4VD - 3(5VE + 4VF)/9 =
0 Multiplying both sides by 9: 117VE - 36VD - 15VF - 12VF
= 0 117VE - 36VD - 27VF
= 0
Substituting VF in terms of VE: 117VE - 36VD - 27(4VD/3)
= 0 117VE - 36VD - 36VD
= 0 117VE - 72VD
= 0 VE
= 72/117 V
= 0.6154 V
Therefore, the voltage at node D is 4VD/3 = 4(0.6154)/3 = 1.2308 V.
To know more about voltage visit :
https://brainly.com/question/30466448
#SPJ11
4. Find the position (x, y) and angle relative to +at which a proton moving at 6.0 x 10m/s emerges from the 0.25T magnetic field "out of the page having width 15.0cm. (the field extends infinitely in the ty directions]
To find the position (x, y) and angle relative to the positive x-axis at which the proton emerges from the magnetic field, we can use the principles of magnetic field motion.
Given:
Initial velocity of the proton, v = 6.0 x 10^6 m/s
Magnetic field strength, B = 0.25 T
Width of the magnetic field, w = 15.0 cm = 0.15 m
Since the magnetic field is perpendicular to the page, the proton will experience a centripetal force due to the Lorentz force. This force causes the proton to move in a circular path inside the magnetic field.
The centripetal force is given by the equation:
F_c = (m*v^2) / r
The magnetic force experienced by the proton is given by the equation:
F_m = q * v * B
Setting the centripetal force equal to the magnetic force, we have
(m*v^2) / r = q * v * B
Simplifying the equation and solving for the radius of the circular path:
r = (mv) / (qB)
Now, we can find the angle θ at which the proton emerges from the magnetic field. The angle can be determined using trigonometry:
θ = tan^(-1)(y/x)
Finally, we can find the position (x, y) using the radius of the circular path and the width of the magnetic field
x = r + w/2
y = 0
Substituting the given values into the equations, we can calculate the position (x, y) and angle θ at which the proton emerges from the magnetic field.
To learn more about, Magnetic Field, click here, https://brainly.com/question/14848188
#SPJ11
A uniform bar of length 5 m is tied at its lower end to a wire
as shown. For the position shown, calculate the relative density of
the bar material.
A uniform bar of length 5 m is shown in the diagram below. The bar is linked at its lower end to a wire.
Figure of the uniform bar of length 5 m
The first step to solve this problem is to establish the connections between the tension in the wire, the weight of the bar, and the buoyant force on the bar's top end. The tension in the wire causes a force on the bar's upper end equal to the tension in the wire. The bar's weight and the buoyant force on its top end also exert forces on the bar. The following equation illustrates the relationships mentioned above:
T = W - B
where T is the tension in the wire, W is the weight of the bar, and B is the buoyant force on the bar's top end.
The relative density of the bar material can be calculated using the equation below:
ρ_{relative} =
\frac{W}{V}
\div ρ_{water}
where W is the weight of the bar, V is the volume of the bar, and ρ_water is the density of water.
We can now evaluate the solution to the issue. The weight of the bar can be calculated using the following equation:
W = mg
= 20 × 9.8
= 196N
where m is the mass of the bar and g is the acceleration due to gravity.
To calculate the buoyant force on the bar's top end, we use Archimedes' principle, which states that the buoyant force on an object immersed in a fluid is equal to the weight of the fluid displaced by the object. As a result, we must first determine the volume of the bar.
The volume of the bar can be determined using the following formula:
V = A
where A is the cross-sectional area of the bar, and h is the length of the bar that is immersed in the water. The cross-sectional area of the bar is:
A =
\frac{1}{2} × 0.1 × 0.01
= 5 × 10^{-4}m^2$$
The length of the bar that is immersed in the water is:
h = 3m - 2.6m
= 0.4m
Substituting the values of the cross-sectional area and the length of the immersed part of the bar, we can determine the volume of the bar to be:
V = Ah
= 5 × 10^{-4} × 0.4
= 2 × 10^{-4} m^3
The buoyant force on the bar's top end can be calculated using the following formula:
B = V × ρ_{water} × g
= 2 × 10^{-4} × 1000 × 9.8
= 1.96N
We can now use the equation below to calculate the tension in the wire:
T = W - B
= 196 - 1.96
= 194.04N
The relative density of the bar material can now be calculated by substituting the values of W, V, and ρ_water into the equation:
ρ_{relative} =
\frac{W}{V}\div ρ_{water} =
\frac{196}{2 × 10^{-4}}
\div 1000 = 980000$$
Therefore, the relative density of the bar material is 980000.
To know more about diagram visit :
https://brainly.com/question/13480242
#SPJ11
An object of weight 80 N accelerates across a rough floor
surface when a horizontal force of 50 N is applied to it. The
object encounters 10 N of frictional force. Determine the
coefficient of frictio
When a horizontal force of 50 N is applied to an object of weight 80 N accelerating across a rough floor surface, and it encounters 10 N of frictional force, the coefficient of friction can be calculated as follows:
Step-by-step solutionGiven:
F = 50 N (applied force)
W = 80 N (weight of the object)
m = 80 N/9.81 m/s² (mass of the object)
Fr = 10 N (frictional force)
a = ? (acceleration of the object)
µ = ? (coefficient of friction)
Newton's Second Law:
F - Fr = ma50 N - 10 N = (80 N/9.81 m/s²)a40
N = (80 N/9.81 m/s²)a40 N = 8.164 m (s²) a
The acceleration of the object is 4.89 m/s².
Frictional Force:
Ff = µ
Nwhere N = WFr = µW
Therefore,µW
= Frµ
= Fr/Wµ
= 10 N/80 Nµ
= 0.125
The coefficient of friction is 0.125, and the acceleration of the object is 4.89 m/s².
To know more about coefficient visit :
https://brainly.com/question/1594145
#SPJ11
Problem 2.16 Find the input-output differential equation relating \( v_{o} \) and \( v_{i}(t) \) for the circuit shown below.
The circuit shown below contains resistors R1 and R2 connected in series. They are connected to an op-amp with an open-loop gain[tex]\(A\)[/tex], an input impedance \(Z_{in}\), and an output impedance \(Z_{o}\).
The op-amp input terminals are also connected to the output through a capacitor C. We are to find the input-output differential equation relating \(v_{o}\) and \(v_{i}(t)\).input-output differential equationThe voltage at the non-inverting terminal of the op-amp is given by:[tex]$$v_{+}=v_{o}$$[/tex]Since the inverting terminal is grounded, the voltage at that terminal is zero.
Thus, the voltage difference across the input terminals is:
[tex]$$v_{d}[/tex]
=[tex]v_{+}-v_{-}[/tex]
=[tex]v_{o}$$Using KCL at node \(v_{-}\[/tex]), we can write the following equation:
[tex]$$\frac{v_{-}}{R_{1}}+\frac{v_{-}}{R_{2}}+\frac{v_{-}-v_{o}}{Z_{in}}[/tex]
[tex]=0$$Rearranging and solving for \(v_{-}\), we get:$$v_{-}[/tex]
=[tex]\frac{R_{2}}{R_{1}+R_{2}}v_{o}$$[/tex]Using the virtual short concept of the op-amp, we know that the voltage at the input terminals is equal.
Thus, we can write[tex]:$$v_{+}=v_{-}$$$$v_{o}[/tex]
=[tex]\frac{R_{1}+R_{2}}{R_{2}}v_{+}$$[/tex]Taking the derivative of both sides with respect to time, we get:
[tex]$$\frac{d}{dt}v_{o}=\frac{R_{1}+R_{2}}{R_{2}}\frac{d}{dt}v_{+}$$[/tex]Using the fact that \(v_{+}
=[tex]v_{o}\), we get:$$\frac{d}{dt}v_{o}[/tex]
=[tex]\frac{R_{1}+R_{2}}{R_{2}}\frac{d}{dt}v_{o}$$[/tex]Solving for the input-output differential equation, we get:
[tex]$$\frac{d}{dt}v_{o}-\frac{R_{1}+R_{2}}{R_{2}}v_{o}=0$$[/tex]Thus, the input-output differential equation relating \[tex](v_{o}\) and \(v_{i}(t)\) is given by:$$\boxed{\frac{d}{dt}v_{o}-\frac{R_{1}+R_{2}}{R_{2}}v_{o}=0}$$[/tex].
To know more about resistors visit:
https://brainly.com/question/30672175
#SPJ11
Score E. (Each question Score10 points, Total Score 12points) Suppose a channel has uniform bilateral noise power spectral density P₁(f) =0.5x10 *W/Hz, the carrier-suppressed bilateral-band signal is transmitted in this channel, and the frequency band of the modulating signal M (t) is limited to 5kHz, the carrier frequency is 100kHz, the transmitting signal power ST is 60dB, and the channel (refers to the modulating channel) loss a is 70dB. Try to determine: (1) The center frequency and band-pass width of the ideal band-pass filter at the front end of the demodulator; (2) The signal-to-noise power ratio of the input of demodulator; (3) The signal-to-noise power ratio of the output of demodulator; (4) Noise power spectral density at the output end of demodulator.
(1) The center frequency is 100 kHz. Band-pass width = 10 kHz. (2) The signal-to-noise power ratio of the input of the demodulator is 60 dB. (3) The signal-to-noise power ratio of the output of demodulator is 58 dB. (4) The noise power spectral density at the output end of the demodulator is 0.5x10-4 W/Hz.
Given the bilateral noise power spectral density P₁(f) = 0.5x10 *W/Hz, the modulating signal frequency band is 5 kHz, the carrier frequency is 100 kHz, transmitting signal power ST is 60 dB, and channel loss a is 70 dB. We are required to determine the center frequency and bandwidth of the ideal bandpass filter at the front end of the demodulator, the signal-to-noise power ratio of the input and output of the demodulator, and noise power spectral density at the output end of demodulator.
The center frequency is 100 kHz. Bandpass filter width is given by (2×5) kHz = 10 kHz. The signal-to-noise power ratio of the input of demodulator is 60 dB. The signal-to-noise power ratio of the output of demodulator is 58 dB. The noise power spectral density at the output end of the demodulator is 0.5x10-4 W/Hz.
Learn more about demodulator here:
https://brainly.com/question/1585447
#SPJ11
A Y-connected synchronous motor is connected to (2.Y0) kilo-volts supply system. The synchronous reactance is (4−0.Y)Ω /phase. The current absorbed by the motor while a particular load is connected to it is 340 A while the excitation voltage is (28Y0) volts. Consider the rotational loss is 30 kW and determine: a. The developed power b. The power angle c. The armature current d. The power factor e. The efficiency of the motor.
a. The developed power: Developed power is the mechanical power produced by the motor. The formula for developed power is: Pd = (Vt × Isinφ) - (Ia2 × Ra). We know: Supply voltage Vt = 2Y0 kV = 2000 volts
Motor current, Is = 340 A
Excitation voltage, Vr = 28Y0 volts = 280 volts
Synchronous reactance, Xs = 4 - 0.Y Ω/phase = 4 Ω (Y = 0.1)
Rotational losses, Wf = 30 kW = 30000 watts
Armature current, Ia = (Isinφ)/3
Where, φ = power factor angle
φ = cos⁻¹(P.F) = cos⁻¹(0.75) = 41.41°
Now, put all the values in the formula:
Pd = (Vt × Isinφ) - (Ia2 × Ra)
Pd = (2000 × 340 × sin41.41°) - ((340sin41.41° / 3)² × 4)
Pd = 551964.86 - 16945.45
Pd = 534019.41 Watt
b. The power factor angle:
The power factor angle is given as:
φ = cos⁻¹(P.F)
φ = cos⁻¹(0.75)
φ = 41.41°
c. The armature current:
Armature current is given as:
Ia = (Isinφ)/3
Ia = (340sin41.41°) / 3
Ia = 71.14 A
d. The power factor:
Power factor, P.F = cosφ
P.F = cos41.41°
P.F = 0.75
e. The efficiency of the motor:
We know, Efficiency = (Power developed / Power input) × 100%
The input power of the motor is given as:
Pin = 3VtIa cosφ + 3Ia²Ra
Input power, Pin = 3 × 2000 × 71.14 × cos41.41° + 3 × (71.14)² × 4
Input power, Pin = 410366.21 Watt
Now, put all the values in the efficiency formula:
Efficiency = (Power developed / Power input) × 100%
Efficiency = (534019.41 / 410366.21) × 100%
Efficiency = 130.06%
Since the efficiency value is greater than 100%, it indicates that we have made a mistake in the calculations above. Hence, we need to recheck the calculations.
To know more about power visit:
https://brainly.com/question/29575208
#SPJ11
Sec. Ex. 8 - Electron configuration of elements (Parallel B) Using any reference you wish, write the complete electron configurations for: (a) nitrogen; 152 s2p (b) phosphorus; 152s2p3s3p (c) chlorine. 182s2p3 s3p
(a) The complete electron configuration of nitrogen is 1s2 2s2 2p3.
(b) The complete electron configuration of phosphorus is 1s2 2s2 2p6 3s2 3p3.
(c) The complete electron configuration of chlorine is 1s2 2s2 2p6 3s2 3p5.
The electron configuration of an element represents the distribution of electrons in its atomic orbitals. Each electron occupies a specific orbital and is described by a set of quantum numbers. The notation used to express electron configurations follows the pattern of the periodic table, indicating the principal energy levels (n) and the sublevels (s, p, d, f) within each level.
Nitrogen has an atomic number of 7, meaning it has 7 electrons. Following the Aufbau principle, electrons fill the lowest energy levels first. The electron configuration for nitrogen is 1s2 2s2 2p3, which means it has two electrons in the 1s orbital, two electrons in the 2s orbital, and three electrons in the 2p orbital.
Phosphorus has an atomic number of 15. Following the same principles, the electron configuration for phosphorus is 1s2 2s2 2p6 3s2 3p3. It has two electrons in the 1s orbital, two electrons in the 2s orbital, six electrons in the 2p orbital, two electrons in the 3s orbital, and three electrons in the 3p orbital.
Chlorine has an atomic number of 17. Its electron configuration is 1s2 2s2 2p6 3s2 3p5, indicating two electrons in the 1s orbital, two electrons in the 2s orbital, six electrons in the 2p orbital, two electrons in the 3s orbital, and five electrons in the 3p orbital.
Learn more about:Configuration
brainly.com/question/30279846?
#SPJ11
19. A body vibrating with viscous damping. In 10 cycles its amplitude diminishes from 3cm to 0.06cm. Find the logarithmic decrement and damping ratio. (4 points)
The logarithmic decrement (δ) is defined as the natural logarithm of the ratio of the amplitude of any two consecutive cycles.
The expression of logarithmic decrement is as follows:
[tex]$$\delta = \frac{1}{n} \ln \left(\frac{x_n}{x_{n+1}}\right)$$[/tex]
where n is the number of cycles, and x is the amplitude of the vibrations. For this problem, n = 10, and x1 = 3 cm, and x2 = 0.06 cm. Thus, the logarithmic decrement is
[tex]$$\delta = \frac{1}{10} \ln \left(\frac{3}{0.06}\right) = 1.609$$[/tex]
The damping ratio (ζ) is defined as the ratio of the critical damping coefficient to the actual damping coefficient. The expression of the damping ratio is as follows:
[tex]$$\zeta = \frac{\delta}{\sqrt{4 \pi^2 + \delta^2}}$$[/tex]
Substituting the value of δ, we have
[tex]$$\zeta = \frac{1.609}{\sqrt{4\pi^2 + 1.609^2}} = 0.2525$$[/tex]
The logarithmic decrement and damping ratio are 1.609 and 0.2525 respectively. The logarithmic decrement is 1.609 and the damping ratio is 0.2525.
To know more about vibrations visit:
https://brainly.com/question/8613016
#SPJ11
b) Consider the circuit diagram as shown in Figure Q5b. (i) Calculate the total inductance (LT) of the circuit. (3 Marks) (ii) Suppose that the inductors of the circuit are made up of coils only, suggest any TWO characteristics of the coils that may affect the inductances of the inductors. (2 Marks)
Iron, ferrite, and other alloys are examples of magnetic core materials. The permeability and saturation levels of the magnetic core material have a significant impact on the inductor's inductance.
(i) Total Inductance LT:
In series-connected inductors, the total inductance of the circuit is the sum of the inductances of each inductor. In the given circuit, L2 and L3 are in series, so their inductances are added together as the total inductance.
As a result, LT=L2+L3 = 20 mH + 10 mH = 30 mH.
(ii) Two characteristics of the coils that may affect the inductances of the inductors are as follows:
Coiling Density:
The number of turns per unit length or per unit area in a coil is referred to as the coiling density.
The inductance of an inductor increases as the coiling density of the coil increases. A larger number of turns in a coil would also contribute to a greater inductance.
Magnetic Core:
The core material used in the construction of an inductor also has an effect on its inductance. When the inductor's magnetic core is altered, its inductance changes.
Iron, ferrite, and other alloys are examples of magnetic core materials. The permeability and saturation levels of the magnetic core material have a significant impact on the inductor's inductance.
Learn more about magnetic core from the given link
https://brainly.com/question/29521537
#SPJ11
should you work in power industry
2 . why electrical engineering is the best field in
engineering field?
Answer: If you are interested in solving the complex issues faced by society and have a curiosity for how things work, then power industry can be a great career option for you. If you want to make a difference in the world and enjoy problem-solving, you should consider a career in power industry.
A career in power industry offers challenges that help develop your technical and professional skills. It provides you with the chance to innovate and help the world become a better place.
Electrical engineering is a field that deals with the design, development, and maintenance of electrical control systems, electrical equipment, and components.
Electrical engineering is a highly specialized field, and it is widely considered to be the best field in the engineering field. Electrical engineering is the best field in engineering because of its many applications in different industries, such as electronics, telecommunications, power, and renewable energy.
Electrical engineering is the foundation for the development of modern technology, and it offers a vast array of job opportunities. A career in electrical engineering provides a chance to work on complex and challenging projects that are at the forefront of technology. It also offers a great salary and job stability. Overall, electrical engineering is a rewarding field that offers exciting opportunities for growth and development.
To learn more about industry visit;
https://brainly.com/question/16680576
#SPJ11
A 2kg block hangs without vibrating at the bottom end of a spring with a force constant of 400 N/m. The top end of the spring is attached to the ceiling of an elevator car. The car is rising with an upward acceleration of 5 m/s
2
when the acceleration suddenly ceases at time t=0 and the car moves upward with constant constant speed. (g=10 m/s
2
). What is the angular frequency of oscillation of the block after the acceleration ceases?
The angular frequency of oscillation of the block after the acceleration ceases is 2.24 rad/s. The angular frequency of oscillation (ω) can be found using the equation:ω = √(k / m). Substituting the given values into the equation, we get: ω = √(400 N/m / 2 kg) = 20 √2 rad/s ≈ 2.24 rad/s.
When the elevator car is accelerating upward, the net force acting on the block is the sum of the gravitational force and the force exerted by the spring. Using Newton's second law, we can write the equation:
m * (g + a) = k * x. where m is the mass of the block, g is the acceleration due to gravity, a is the upward acceleration of the car, k is the force constant of the spring, and x is the displacement of the block from its equilibrium position. At equilibrium, the displacement of the block is zero, so we have:m * g = k * x_eq. where x_eq is the equilibrium position of the block.After the acceleration ceases, the net force acting on the block is only due to gravity, and it will oscillate about its equilibrium position. The angular frequency of oscillation (ω) can be found using the equation:ω = √(k / m). Substituting the given values into the equation, we get: ω = √(400 N/m / 2 kg) = 20 √2 rad/s ≈ 2.24 rad/s.Therefore, the angular frequency of oscillation of the block after the acceleration ceases is approximately 2.24 rad/s.
To learn more about angular frequency;
https://brainly.com/question/33512539
#SPJ11
Consider the famous Koch snowflake drawn below to five stages. This fractal is generated by iterating each side of an equilateral triangle as a Koch curve (see also Figure \( 7.24 \) in the book). If
The Koch Snowflake is a fractal that is generated by iterating each side of an equilateral triangle as a Koch curve. The five stages of this fractal are shown below. [Figure from https://www.math.ucla.edu/~pejman/KochSnowflake.html]In the first stage, we start with an equilateral triangle.
The next four stages are obtained by iterating the following process on each side of the triangle:1. Divide the line segment into three equal parts2. Replace the middle third with two line segments that form an equilateral triangle with height equal to the middle third3. Repeat the previous step for each new line segment, except for the ones that form the equilateral triangleThe resulting curve has an infinite length, but a finite area. In fact, the area of the Koch Snowflake is equal to
[tex]$\frac{8}{5}$[/tex]
The Koch Snowflake is an example of a fractal, which is a geometric object that has the property of self-similarity at different scales. Fractals are found in many natural and man-made objects, such as clouds, trees, coastlines, and computer-generated graphics.
To know more about geometric visit:
https://brainly.com/question/29199001
#SPJ11
The measurement of voltage requires to place the voltmeter leads across the component whose voltage you wish to determine True False
The given statement "The measurement of voltage requires to place the voltmeter leads across the component whose voltage you wish to determine" is true.
The voltage is the difference in electrical potential between two points in a circuit, or it's the amount of electrical potential energy in a circuit. Voltage is measured in volts using a voltmeter, which is a device that measures the potential difference between two points in a circuit. Voltage is generally referred to as electric potential energy per unit charge.
As we know, every electrical circuit has a voltage that is the difference between the circuit's potential energy and the potential energy of the circuit's surroundings. The voltage across a component in a circuit is determined by comparing the potential energy on each side of the component.
A voltmeter is a device used to calculate this voltage. It works by measuring the voltage difference between two points in a circuit.The voltmeter is connected in parallel with the component whose voltage is being measured. The two leads of the voltmeter are connected in parallel with the component.
Know more about voltage here:
https://brainly.com/question/32002804
#SPJ11
large cruise ship of mass 6.70×10 7
kg has a speed of 13.0 m/s at some instant. (a) What is the ship's kinetic energy at this time? x Your response differs significantly from the correct answer. Rework your solution from the beginning and check each step carefully. J (b) How much work is required to stop it? (Give the work done on the ship. Include the sign of the value in your answer.) x The response you submitted has the wrong sign. ] (c) What is the magnitude of the constant force required to stop it as it undergoes a displacement of 3.30 km ? The response you submitted has the wrong sign. N
(a) The kinetic energy of the cruise ship at that instant is approximately 5.6515 × 10⁸ J.
(b) The work required to stop the ship is approximately -5.6515 × 10⁸ J.
(c) The magnitude of the constant force required to stop the ship during a displacement of 3.30 km is approximately 1.713 × 10⁵ N.
(a) To calculate the kinetic energy of the cruise ship, we can use the formula:
Kinetic energy = (1/2) * mass * velocity²
Substituting the given values:
Mass = 6.70 × 10⁷ kg
Velocity = 13.0 m/s
Kinetic energy = (1/2) * (6.70 × 10⁷ kg) * (13.0 m/s)²
Calculating:
Kinetic energy = 0.5 * (6.70 × 10⁷ kg) * (169 m²/s²)
Kinetic energy = 5.6515 × 10⁸ J
Therefore, the ship's kinetic energy at that instant is approximately 5.6515 × 10⁸ J.
(b) To calculate the work required to stop the cruise ship, we need to consider the change in kinetic energy. Since the ship is coming to a stop, the final kinetic energy is zero.
Work = Change in kinetic energy = Final kinetic energy - Initial kinetic energy
The final kinetic energy is zero, the work done to stop the ship is equal to the negative of the initial kinetic energy:
Work = -5.6515 × 10⁸ J
Therefore, the work required to stop the ship is approximately -5.6515 × 10⁸ J.
(c) The magnitude of the constant force required to stop the ship can be calculated using the work-energy theorem. The work done by a force is equal to the force multiplied by the displacement:
Work = Force * Displacement
The work required to stop the ship is -5.6515 × 10^8 J and the displacement is 3.30 km, we can rearrange the equation to solve for the force:
Force = Work / Displacement
Substituting the values:
Force = (-5.6515 × 10⁸ J) / (3.30 km)
Converting the displacement to meters:
Force = (-5.6515 × 10⁸J) / (3.30 km) * (1000 m/km)
Calculating:
Force = -1.713 × 10⁵ N
Therefore, the magnitude of the constant force required to stop the ship as it undergoes a displacement of 3.30 km is approximately 1.713 × 10⁵ N.
To know more about work-energy theorem, refer to the link below:
https://brainly.com/question/32184004#
#SPJ11
Homework-3 Question 1: A cam is to give the following motion to a knife-edge follower: 1 Outstroke during \( 30^{\circ} \) of cam rotation: 2 Dwell for the next \( 60^{\circ} \) of cam rotation : 3. R
Cam is a mechanical device that is used to convert rotary motion into linear motion. The cam follower mechanism is used to convert the rotary motion of a cam into a reciprocating motion of a follower. It consists of a cam and a follower. The cam is a rotating element that imparts a specified motion to the follower.
The follower is a sliding element that follows the motion of the cam.
Cam specifications for knife-edge follower motion: Outstroke during 30° of cam rotation: During the first 30° of cam rotation, the cam must provide the follower with a motion that moves it away from the cam centerline.2 Dwell for the next 60° of cam rotation: During the next 60° of cam rotation, the follower must remain in its outstroke position.
3. Return Stroke for the remaining 270° of cam rotation:
The cam must now provide a motion to the follower that moves it back towards the cam centerline. The return stroke motion should be such that the follower returns to its initial position by the end of 360° of cam rotation.
In conclusion, this is the cam specification for a knife-edge follower motion:
1 Outstroke during 30° of cam rotation:
2 Dwell for the next 60° of cam rotation :
3. Return Stroke for the remaining 270° of cam rotation.
To learn more about motion visit;
https://brainly.com/question/2748259
#SPJ11
Cross sections of a beam in pure bending have which quality? O They remain plane upon loading, only in the elastic range. They remain plane upon loading, for both elastic and inelastic behavior. They do not remain plane upon loading, for both elastic and inelastic behavior. none of these choices The bending moment in a beam is related to shear as: the derivative of the moment with respect to x is the shear force the derivative of the applied load the integral of the applied load the integral of the moment with respect to x is the shear force
The derivative of the moment with respect to x is the shear force.
Cross sections of a beam in pure bending remain plane upon loading, only in the elastic range.
Pure bending of a beam refers to the situation where an axial force is not applied to the beam, but the beam is only subjected to a moment load.
The cross sections of a beam in pure bending remain plane upon loading, only in the elastic range.
This means that they do not deform or warp during the application of the moment load when the material is still in its elastic limit.
However, if the material is loaded beyond the elastic limit, plastic deformation will occur and the cross sections of the beam will no longer remain plane.
The bending moment in a beam is related to the shear force as follows: the derivative of the moment with respect to x is the shear force.
Learn more about shear force from the given link
https://brainly.com/question/29735193
#SPJ11
PLEASE SHOW STEP-BY-STEP WORK
1. An explosion occurs 34 km away. Calculate the time it takes for its sound to reach your ears, traveling at 340 m/s.
2. Two charges that are separated by one meter exert 1-N forces on each other. What will be the force if the charges are pushed together so the separation is 25 centimeters?
When the charges are pushed together so that the separation is 25 centimeters or 0.25m, the equation becomes:
1.Time = Distance/Speed= 34 km × 1000 m/km/ 340 m/s= 100000 m/ 340 m/s= 294.12s
2. The force between two charges, given as Coulomb's law:
F = k (Q1Q2 / r²)Where Q1 and Q2 are the magnitudes of the charges, r is the distance between the charges, k is Coulomb's constant (k = 9 × 10^9 Nm²/C²).
If two charges separated by one meter exert 1-N forces on each other, the force is given by:
F = k Q1 Q2 / r² ---------(1
)Let F1 be the force when the charges are 1m apart. Therefore, the equation becomes:
1 = k Q1 Q2 / 1² or k Q1 Q2 = 1 --------(2[tex]1 = k Q1 Q2 / 1² or k Q1 Q2 = 1 --------(2[/tex])
F = k Q1 Q2 / r²where r = 0.25m
Putting k Q1 Q2 = 1 from equation (2)
above in the equation above gives
[tex]:F = 1 / r² = 1 / (0.25)²= 1 / 0.0625= 16[/tex]N
To know more about charges visit:
https://brainly.com/question/28721069
#SPJ11
1. Some \( 15 \mathrm{~kg} \) boxes are stacked on top of each other. If each box can withistand \( 1000 \mathrm{~N} \) of force before crushing, how many boxes can safely be placed in each stack?
Only 6 boxes can be safely stacked on top of each other before the force exerted exceeds the maximum force that can be withstood by the boxes.
The number of boxes that can be stacked on top of each other depends on the weight and strength of the boxes. In this case, each box has a weight of 15 kg and can withstand a force of 1000 N before crushing.
To determine how many boxes can safely be placed in each stack, we need to use the formula for weight:
W = m x g
Where W is weight, m is mass, and g is acceleration due to gravity.
In this case, the weight of each box is:
W = 15 kg x 9.8 m/s^2
W = 147 N
To determine the number of boxes that can safely be stacked, we need to divide the maximum force that can be withstood by the weight of each box:
n = 1000 N / 147 N
n = 6.80 boxes
Therefore, only 6 boxes can be safely stacked on top of each other before the force exerted exceeds the maximum force that can be withstood by the boxes. It is important to note that this calculation assumes that the boxes are stacked directly on top of each other and that there are no other factors, such as uneven distribution of weight, that could affect the safety of the stack.
To learn more about force exerted:
https://brainly.com/question/30452713
#SPJ11
To determine the maximum number of boxes that can be safely stacked on top of each other, we calculate the force exerted on each box and then divide the maximum force each box can withstand by the force exerted on each box. The rounded-down result gives us the maximum number of boxes that can be safely stacked, which is 6.
Explanation:To determine how many boxes can safely be placed in each stack, we need to consider the total force exerted on the boxes. Force is equal to mass times acceleration, and in this case, the force is the weight of the boxes. The weight of each box is given as 15 kg (mass) multiplied by the acceleration due to gravity (approximately 9.8 m/s^2). Therefore, the force exerted on each box is 15 kg x 9.8 m/s^2 = 147 N.
Since each box can withstand 1000 N of force, we divide the maximum force each box can withstand (1000 N) by the force exerted on each box (147 N) to determine the maximum number of boxes that can be safely stacked. This calculation gives us approximately 6.8 boxes. However, since we can't have a fraction of a box, we round down to the nearest whole number. Therefore, the maximum number of boxes that can be safely stacked is 6.
Learn more about stacking boxes here:https://brainly.com/question/32055511
#SPJ2
The pavement compactor is traveling down the incline at vG=5
ft/s when the motor is disengaged. The body of the compactor,
excluding the rollers, has a weight of 8000 lb and a center of
gravity at G.
When the motor is disengaged, the pavement compactor travels down the slope at 5 feet per second, which implies that its initial velocity is 5 feet per second. The pavement compactor's weight is 8000 pounds, and its center of gravity is located at G. Let us assume that the slope's incline angle is θ.
Let's make some further assumptions. Let us assume that there is no rolling friction, that the rollers' moment of inertia is negligible, and that the pavement compactor's center of gravity moves in a straight line throughout the slope.The force acting on the pavement compactor is the gravitational force component parallel to the slope, and its magnitude is 8000 pounds multiplied by the sine of the incline angle. The acceleration of the pavement compactor equals the gravitational force's parallel component divided by the pavement compactor's mass, or 8000 pounds divided by 32.174 feet per second squared, multiplied by the cosine of the incline angle.
The velocity of the pavement compactor at any point down the slope is equal to the square root of twice the distance down the slope multiplied by the acceleration. The distance down the slope is equal to the slope's length multiplied by the sine of the angle of inclination.
Therefore, the velocity of the pavement compactor at any point down the slope is as follows:
v = √[2gs sin(θ)cos(θ)]
Where,
v = Velocity of the pavement compactor (ft/s)
g = Acceleration due to gravity (32.174 ft/s²)
s = Distance travelled by the pavement compactor down the slope (ft)θ = Angle of inclination of the slope (radians)It is worth noting that this formula only works if the slope's length is far greater than the pavement compactor's length.
To know more about compactor visit :
https://brainly.com/question/31760068
#SPJ11
wo charged particles create an electric potential, and everywhere in the xy-plane this potential is described by the following function. V=
(x+1.58 m)
2
+y
2
29.0 V
−
x
2
+(y−2.76 m)
2
40.0 V
first term q
1
=nc x=m y=m Give the charge (in nC) and coordinates (in m) for the position of the particle responsible for the second term. q
2
=nC x=m y=m
The charge and coordinates for the position of the particle responsible for the second term are; q2 = 0.079 nC, x = 0 m, and y = 2.76 m.
To determine the charge and coordinates for the position of the particle responsible for the second term in the given potential V= (x+1.58 m)^2+y^2/29.0 V − x^2+(y−2.76 m)^2/40.0 V, we need to understand the terms of electric potential.
Electric potential: The electric potential, which is also called voltage, is the measure of the electric potential energy per unit charge. It is used in electrical engineering to describe electric potential in circuits or electric fields due to charges. If we move a positive test charge from infinity to a point in the electric field, the electric potential difference will be the work done per unit charge, and the unit is Volt (V). The electric potential difference between two points in an electric field is the difference in the electric potential energy per unit charge between them. It is expressed in volts (V) and is also referred to as voltage.
Electric potential due to point charges: Point charges generate an electric field, which creates an electric potential difference. When a positive test charge is moved from infinity to a point near a point charge, the electric potential increases by a factor of kq/r, where k is the Coulomb constant, q is the charge of the point charge, and r is the distance from the point charge to the point where the potential is being calculated. An increase in the electric potential causes an increase in the electric potential energy of the test charge.
Let's calculate the electric potential due to each point charge.
First term q1 We know that the first term q1=nc and coordinates x=m and y=m.
Thus, we have; q1 = nc = 3.73 nC x = m y = m
Second term q2 Now we have to calculate the charge and coordinates for the position of the particle responsible for the second term.
The second term in the given potential is; V = -x^2 + (y - 2.76m)^2/40.0 V
The potential due to a point charge q at a point with coordinates (x, y) in the xy-plane is given by; V = kq / sqrt((x - a)^2 + (y - b)^2)
Here, a and b are the coordinates of the point charge.
Therefore, we have; a = 0, b = 2.76 m, and k = 9 x 10^9 Nm^2/C^2
If we compare the equation of the second term with the equation of potential due to a point charge, we can calculate the coordinates and charge of the particle responsible for the second term of the potential.
Thus, we have; V = kq / sqrt(x^2 + (y - 2.76 m)^2)40.0 V = 9 x 10^9 Nm^2/C^2 q / sqrt(x^2 + (y - 2.76 m)^2)
Therefore; q2 = 0.079 nC x = 0 m y = 2.76 m
Thus, the charge and coordinates for the position of the particle responsible for the second term are; q2 = 0.079 nC, x = 0 m, and y = 2.76 m.
To know more about coordinates refer to:
https://brainly.com/question/11832103
#SPJ11
Diedre rides her sled down an icy, frictionless hill. When she reaches level ground at the bottom, she is traveling at v i
=4.0 m/s and has a glancing collision with her sledding buddy Brynn, who is initially at rest. Both sledders have the same mass, and they are using identical sleds. The collision causes Diedre's velocity vector to deflect by an angle of θ=21 ∘
, and the velocity vectors of both sledders are perpendicular to each other after the collision. What is Brynn's speed v 2
after the collision? For the limits check, investigate what happens to Brynn's speed v 2
as Diedre's initial speed v i
→0.
Brynn's speed (v₂) after the collision is approximately 0.2412 m/s, and as Diedre's initial speed (vi) approaches 0, Brynn's speed also approaches 0.
To find Brynn's speed (v₂) after the collision, we can use the principle of conservation of momentum.
The momentum before the collision is equal to the momentum after the collision since there are no external forces acting on the system. The momentum is a vector quantity and its magnitude is given by the product of mass and velocity.
Let's denote Diedre's mass and Brynn's mass as m (since they have the same mass).
Before the collision:
Diedre's momentum (p₁) = m * v₁ (where v₁ is Diedre's initial velocity, vi = 4.0 m/s)
Brynn's momentum (p₂) = m * 0 (since Brynn is initially at rest)
After the collision:
Diedre's momentum (p₁') = m * v₁' (where v₁' is Diedre's velocity after the collision)
Brynn's momentum (p₂') = m * v₂ (where v₂ is Brynn's velocity after the collision)
Applying the conservation of momentum:
p₁ + p₂ = p₁' + p₂'
m * v₁ + m * 0 = m * v₁' + m * v₂
Since the masses cancel out, we have:
v₁ = v₁' + v₂
To find v₂, we need to determine v₁', which can be found using trigonometry. We know that the velocity vector deflects by an angle θ = 21°.
Using the law of sines, we have:
v₁' / sin(90° - θ) = v₁ / sin(90°)
v₁' / sin(69°) = v₁ / 1
v₁' = v₁ * sin(69°)
Substituting the values:
v₁' = 4.0 m/s * sin(69°)
Now, we can substitute v₁' back into the equation for conservation of momentum:
4.0 m/s = v₁' + v₂
Simplifying the equation:
v₂ = 4.0 m/s - v₁'
Now, we can evaluate v₂ by substituting the value of v₁':
v₂ = 4.0 m/s - (4.0 m/s * sin(69°))
Calculating v₂:
v₂ ≈ 4.0 m/s - (4.0 m/s * 0.9397)
v₂ ≈ 4.0 m/s - 3.7588 m/s
v₂ ≈ 0.2412 m/s
Therefore, Brynn's speed after the collision (v₂) is approximately 0.2412 m/s.
Regarding the limit as Diedre's initial speed (vi) approaches 0, we can see that as vi approaches 0, the angle θ also approaches 0 (since the vectors become more aligned). In that case, v₁' would become equal to vi, and the equation for v₂ simplifies to:
v₂ = vi - v₁'
Since vi and v₁' are equal in this case, v₂ would be 0.
So, as Diedre's initial speed (vi) approaches 0, Brynn's speed after the collision (v₂) also approaches 0.
To know more about conservation of momentum, refer to the link below:
https://brainly.com/question/30483812#
#SPJ11
Question 22
Not yet answered
Marked out of 1.00 Flag question
A capacitor is connected to an AC voltage with peak voltage at 10 V,
operates at 5kHz. The capacitance was 47μF. Determine the
displacement current in the capacitor when time t=15μs.
a. 13.16 A b. 5.35 A C. −5.35 A d. 14.77 A
To determine the displacement current in the capacitor at a given time t, we can use the formula for displacement current.
The displacement current in a capacitor is not dependent on the time but rather on the rate of change of electric field with respect to time the given scenario, a capacitor with a capacitance of 47 μF is connected to an AC voltage source with a peak voltage of 10 V. The frequency of the AC voltage is 5 kHz. To determine the displacement voltage at a specific time, we need to know the phase relationship between the AC voltage and the time t.
To know more about displacement visit :
https://brainly.com/question/11934397
#SPJ11
Q No.2 Apply Voltage and Current Divider Formulae to find Vo
In a circuit, the voltage divider rule and current divider rule are frequently used to find the output voltage and current. These laws are extremely helpful in designing circuits, and they may be used in numerous scenarios.
The formula for the voltage divider rule is as follows:
V1 = Vt (R1 / R1 + R2)
V2 = Vt (R2 / R1 + R2)
Where Vt is the total voltage of the circuit.
The formula for the current divider rule is as follows:
I1 = It (R2 / R1 + R2)
I2 = It (R1 / R1 + R2)
Where It is the total current of the circuit.
In this circuit, we want to find the voltage Vo across resistor R3. To do this, we must first calculate the total resistance of the circuit:
RT = R1 + R2 + R3 || R4
RT = (R1 + R2) || (R3 + R4)
RT = (2kΩ + 1kΩ) || (4kΩ + 2kΩ)
RT = 1.33kΩ
Now that we know the total resistance of the circuit, we can use the voltage divider rule to find the voltage across resistor R3:
V3 = Vt (R3 / RT)
V3 = 12V (4kΩ / 1.33kΩ)
V3 = 36V
We can now use the current divider rule to find the current through resistor R3:
I3 = It (R4 / RT)
I3 = 3mA (2kΩ / 1.33kΩ)
I3 = 4.5mA
Finally, we can use Ohm's law to find the voltage Vo across resistor R3:
Vo = R3 I3
Vo = 4kΩ × 4.5mA
Vo = 18V
Therefore, the output voltage Vo across resistor R3 is 18V.
To know more about circuits visit:
https://brainly.com/question/12608516
#SPJ11
Q1: Give a example of current series feedback circuit . Draw circuit , prove that your circuits indeed is th case of current series feedback circuit. Also derive the equation for Vfand Vi
Q2 Give examples of voltage shunt feed back circuits . Draw circuit , prove that your circuits indeed are examples of the feedback type mentioned above. Also derive the equation for If and Ii
Q3: Show how 555 IC can be used as VCO
This is representation of the use of current series feedback circuits, voltage shunt feedback circuits, and the 555 timer as a VCO.
Q1: A current series feedback circuit is a type of feedback circuit in which the feedback signal is proportional to the output current of the amplifier. This type of feedback circuit is often used to stabilize the output voltage of an amplifier.
In this circuit, the feedback signal is the current that flows through the resistor Rf. The feedback current is proportional to the output current of the amplifier, because the current through the resistor Rf is equal to the output current of the amplifier divided by the gain of the amplifier.
The equation for the output voltage of this circuit is:
Vout = Vcc * Rf / (Rf + Ri)
(below image 1)
Q2: A voltage shunt feedback circuit is a type of feedback circuit in which the feedback signal is proportional to the output voltage of the amplifier. This type of feedback circuit is often used to improve the linearity of an amplifier.
In this circuit, the feedback signal is the voltage that appears across the resistor Rf. The feedback voltage is proportional to the output voltage of the amplifier, because the voltage across the resistor Rf is equal to the output voltage of the amplifier minus the input voltage of the amplifier.
The equation for the output voltage of this circuit is:
Vout = Vcc * (1 + Rf / Ri)
(below image 2)
Q3: The 555 timer can be used as a voltage-controlled oscillator (VCO) by connecting a potentiometer to the control voltage pin (pin 5). The output frequency of the VCO will be proportional to the control voltage.
In this circuit, the potentiometer is connected to the control voltage pin of the 555 timer. The output frequency of the VCO will be proportional to the voltage setting of the potentiometer.
The equation for the output frequency of the VCO is:
f = 1.44 / (R1 + R2) * (1 + (Vcont / 2Vcc))
(below image 3)
To learn more about potentiometer: https://brainly.com/question/32634507
#SPJ11
a 260 kg pig,running with a speed of 2 m/s reaches the tip of a 8m high hill and slides down to the bottom
(a)how fast is it sliding when he is halfway downhill?
(b)How fast is it sliding when it reaches the bottom of the hill?
The speed of the pig when he reaches the bottom of the hill is 12.98 m/s.
(a) The speed of the pig when he is halfway downhill is 7.9 m/s.(b) The speed of the pig when he reaches the bottom of the hill is 12.98 m/s.
Given data:The mass of the pig, m = 260 kgThe speed of the pig, v = 2 m/sThe height of the hill, h = 8 m(a) Halfway down the hill, the height of the pig is (8/2) = 4 mVelocity of the pig at the top of the hill, V₁ = vUsing the law of conservation of energy, we have initial energy = final energyInitial energy of the pig at the top of the hill,Kinetic energy, KE = ½ mV₁²Potential energy, PE = mghwhere g is the acceleration due to gravity = 9.8 m/s²Final energy of the pig at the halfway down the hill,Kinetic energy, KE = ½ mv₂²Potential energy,
PE = mgh where v₂ is the velocity of the pig at halfway down the hill
The law of conservation of energy can be written as½ mV₁² = ½ mv₂² + mgh
Substituting the given values,
mv₂² = mgh + ½ mV₁²v₂²
= 2gh + V₁²v₂²
= 2(9.8 m/s² × 4 m) + (2 m/s)²v₂
= 7.9 m/s
Therefore, the speed of the pig when he is halfway downhill is 7.9 m/s(b)How fast is it sliding when it reaches the bottom of the hill?Let v₃ be the velocity of the pig at the bottom of the hillApplying the law of conservation of energy at the bottom of the hill we have:
Initial energy of the pig at the top of the hill,Kinetic energy, KE = ½ mV₁²Potential energy, PE = mgh where g is the acceleration due to gravity = 9.8 m/s²Final energy of the pig at the bottom of the hill,
Kinetic energy,
KE = ½ mv₃²
Potential energy, PE =
law of conservation of energy can be written as½ mV₁² = ½ mv₃²
Therefore, v₃² = V₁² + 2ghv₃²
= (2 m/s)² + 2(9.8 m/s² × 8 m)v₃²
= 168.4 m²/s²v₃
= 12.98 m/s
To know more about speed visit:-
https://brainly.com/question/17661499
#SPJ11
g) A wire has a diameter of 5 mm, original length is 20m. Applying a force of 40 N causes the wire to extend by 0.5 mm. Calculate the following: i) The tensile stress. ii) The tensile strain. iii) Young's Modulus.
the tensile stress, tensile strain, and Young's modulus of the wire are 5.09 × 10⁶ N/m², 2.5 × 10⁻⁵, and 2.04 × 10¹¹ N/m² respectively.
Given the diameter of the wire is 5 mm and its original length is 20 m. When a force of 40 N is applied to the wire, it extends by 0.5 mm.
Tensile stress is given by;
σ = F /A
where F = 40 N
σ = Tensile stress
A = πd²/4 = (π / 4) × (5 × 10⁻³ m)²σ = (40) / (π / 4) × (5 × 10⁻³)²σ = 5.09 × 10⁶ N/m²Tensile strain is given by;
ε = (ΔL) / L
where
ΔL = extension produced
L = Original length of the wire
ε = (0.5 × 10⁻³) / (20)
ε = 2.5 × 10⁻⁵
Young's modulus is given by;
E = σ / ε
E = (5.09 × 10⁶) / (2.5 × 10⁻⁵)E = 2.04 × 10¹¹ N/m²
Therefore, the tensile stress, tensile strain, and Young's modulus of the wire are 5.09 × 10⁶ N/m², 2.5 × 10⁻⁵, and 2.04 × 10¹¹ N/m² respectively.
learn more about tensile stress here
https://brainly.com/question/22093788
#SPJ11
pove 16- What does the Dynamometer-display indicate when magnetic torque nob is set to minimum? a. zero b. the sum of the dynamometer friction torque Tr(DYN.) and belt friction torque Tr(BELT) c. the load torque TLOAD produced by the dynamometer. d. none of the above ₁ 17- For the dynamometer operation, the corrected torque is a. always greater than the uncorrected torque b. always less than the uncorrected torque c. sometimes greater and sometimes less than the uncorrected torque d. none of the above
16) The Dynamometer-display indicates zero when the magnetic torque knob is set to a minimum. The dynamometer friction torque Tr(DYN.) and belt friction torque Tr(BELT) are not included in the indication when the magnetic torque knob is set to a minimum. a. is correct.
17) In dynamometer operation, the corrected torque is sometimes greater and sometimes less than the uncorrected torque. Corrected torque is required when we are measuring power on the test bed, which is then adjusted to account for any discrepancies. option c.
Sometimes greater and sometimes less than the uncorrected torque is the correct answer to the question.
To know more about Dynamometer visit:
https://brainly.com/question/32304497
#SPJ11
a) With the aid of circuit diagram explain the operation of first quadrant chopper.
b) Explain the principle of operation of second quadrant chopper.
c) A 220 V, 1500 rev/min, 25 A permanent-magnet dc motor has an armature resistance of 0.3 Q. The motor's speed is controlled with the first quadrant dc chopper. Calculate the chopper's duty ratio that yields a motor speed of 750 rev/minat rated torque.
The duty ratio of a chopper cannot be negative, so we will have to flip the switch and convert it to a first-quadrant chopper with a duty ratio of 0.067.
a) Operation of first quadrant chopper:
The first-quadrant chopper operates in the first quadrant of the i-v plane. When an SCR is used as the switching component, it is generally referred to as a first-quadrant SCR chopper.
b) Principle of operation of second quadrant chopper:
When a step-down converter is used to regulate the average output voltage to less than the input voltage, it is known as a second-quadrant chopper.
Because the circuit operates in the second quadrant of the i-v plane, it is referred to as a second-quadrant chopper. It's usually used for speed control in DC motors.
A four-quadrant chopper is a combination of a first-quadrant and a second-quadrant chopper, which can operate in all four quadrants of the i-v plane.
c) Calculation of the chopper's duty ratio:
A 220 V, 1500 rev/min, 25 A permanent magnet DC motor has an armature resistance of 0.3 Q.
We know that N = (120f)/p,
where f is the frequency and p is the number of poles. If we consider the frequency to be 50Hz and the number of poles to be 4, we obtain the following:
N = (120 × 50)/4
= 1500 rpm
We can also calculate the motor's back emf, which is given by the equation
Eb = (V - IaRa),
where V is the applied voltage, Ia is the armature current, and Ra is the armature resistance. Here, we can calculate the back emf as follows:
Eb = (220 - 25 × 0.3)
= 212.5 V
At rated torque, the motor's speed is 1500 rpm. We can also calculate the duty ratio of the chopper, which is given by the following formula:
D = (Eba - V)/Eba,
where Eba is the motor's back emf at rated speed. If we assume that the speed is halved, or 750 rpm, we can calculate the new back emf as follows:
Eba' = (N'/N) × Eba
= (750/1500) × 212.5
= 106.25 V
The duty ratio can now be calculated as follows:
D = (Eba' - V)/Eba'
= (106.25 - 220)/106.25
= -1.067
The duty ratio of a chopper cannot be negative, so we will have to flip the switch and convert it to a first-quadrant chopper with a duty ratio of 0.067.
Learn more about ratio from the given link
https://brainly.com/question/12024093
#SPJ11
#4 Crash-Test A car (m-2500 kg; v=140 km/h) hits a wall (m infinite, v-0). The car becomes deformed and the crush zone (0.5 m) is compressed. Calculate the corresponding acceleration (assuming a constant value). Within which time interval does that compression happen? Try to find out, how fast each part of the airbag system therefore has to operate
The compression of crush zone is 0.5 m and the time interval in which that compression happen is 0.82 s.
- To determine the corresponding acceleration, we will use the formula of acceleration that is given below: a = (vf - vi)/ t.
Here, vf is the final velocity and vi is the initial velocity with t as the time taken. Now, the final velocity will be zero because the car will come to a stop due to the collision.
- The initial velocity can be calculated as: vi = 38.89 m/s.
Since the wall is infinite and cannot move, it will provide an opposite and equal force to the car, which will cause it to stop.
The time taken (t) can be calculated using the formula of distance traveled during deceleration: d = (vf + vi) / 2 × t.
Here, the distance traveled (d) is the compression of the crush zone, which is given as 0.5 m.
Putting in the given values, we get:
t = (vf + vi) / 2d
t= (0 + 38.89) / 2 × 0.5
t = 0.82 s.
- Now, we can calculate the acceleration using the formula that is given below:
a = (vf - vi) /t
a = (0 - 38.89) / 0.82
a = -474.57 m/s². The negative sign indicates that the acceleration is in the opposite direction to the motion of the car. To ensure the safety of the occupants during the collision, the airbag system must operate within the time that it takes for the car to decelerate.
- This time can be calculated as the time taken for the car to travel half the distance of the compression of the crush zone, which is 0.25 m.
Using the formula of distance traveled during deceleration:
d = (vf + vi) / 2 × t.
0.25 = (0 + 38.89) / 2 × t
t = 0.205 s.
Therefore, the airbag system must operate within 0.205 seconds to ensure the safety of the occupants. Each part of the system must operate at a speed that is faster than this.
For more such questions on time , visit:
https://brainly.com/question/26046491
#SPJ8
