The amortization expense is debited to reflect the portion of the patent's cost that has been allocated as an expense for the year. The accumulated amortization account is credited to track the total amortization accumulated over the years.
To record the amortization expense for the patent, the journal entry would be as follows:
Date: December 31, 2022
Amortization Expense $12,000
Accumulated Amortization - Patent $12,000
The patent has an estimated useful life of 10 years, so the annual amortization expense is calculated by dividing the cost of the patent ($120,000) by its useful life (10 years). In this case, the annual amortization expense is $12,000. It is important to note that the above journal entry is recorded at the end of the year (December 31) to reflect the amortization expense for that year. The process is repeated each year until the full cost of the patent has been amortized.
Learn more about amortization expense here: brainly.com/question/29575797
#SPJ11
a. Date | Account | Debit | Credit Jan 2, 2012 | Amortization Expense | $12,000 | | Accumulated Amortization | | $12,000, b. Date | Account | Debit | Credit Jan 2, 2013 | Amortization Expense | $12,000 | | Accumulated Amortization | | $24,000
To record the amortization expense for the patent purchased by Pevensie Company, you need to determine the amortization amount for each year based on the estimated useful life of 10 years. Amortization Expense = (Cost of Patent - Residual Value) / Useful Life
In this case, the cost of the patent is $120,000 and the estimated useful life is 10 years.(a) To record the amortization expense for the first year (2012), you would use the following journal entry: Date | Account | Debit | Credit
Jan 2, 2012 | Amortization Expense | $12,000 | | Accumulated Amortization | | $12,000
(b) To record the amortization expense for subsequent years, you would follow the same journal entry as above, but adjust the year and amounts accordingly. For example, for the second year (2013), the journal entry would be:
Date | Account | Debit | Credit Jan 2, 2013 | Amortization Expense | $12,000 | | Accumulated Amortization | | $24,000
Remember, the amortization expense reduces the value of the patent on the balance sheet and represents the allocation of the patent's cost over its useful life. The accumulated amortization is a contra-asset account that shows the total amortization expense incurred over the years.
To know more about Debit refer here:
https://brainly.com/question/29608520#
#SPJ11
2. Joe Wood decided to retire in 5 years in Arizona. What amount
should Joe invest today so he can withdraw $60,000 at the end of
each
year for 30 ears after he retires? Assume Joe can invest money at
Joe Wood should invest approximately $1,231,203.88 today to withdraw $60,000 at the end of each year for 30 years after he retires in 5 years. To calculate the amount Joe should invest today, we need to consider the future value of an annuity formula.
Since Joe wants to withdraw $60,000 per year for 30 years, we can use the formula FV = P * [(1 + r)^n - 1] / r, where FV is the future value, P is the annual withdrawal, r is the interest rate, and n is the number of years. Rearranging the formula to solve for P, we get P = FV * r / [(1 + r)^n - 1]. Substituting the given values (FV = $60,000, r = 0.05, n = 30), we find that P ≈ $1,231,203.88. Therefore, Joe should invest approximately $1,231,203.88 today to meet his retirement goals.
P = $60,000 * 0.05 / [(1 + 0.05)^30 - 1]
P ≈ $1,231,203.88
To know more about Invest visit.
https://brainly.com/question/29547577
#SPJ11
Laurin Limited had 378,000 shars outstanding on Jan 1, Y4.
On March 1, Y4 Laurin issued 15,800 shares in exchange for equipment
On July 1, Y4 Laurin repurchased and cancelled 57,000 shares
On October 1, Y4 Laurin declared and issued a 20% stock dividend
REQUIRED
Calculate Laurin's weighted average number of shares outstanding at Dec 31, Y4.
Laurin's weighted average number of shares outstanding at December 31, Y4 is 372,700 shares.
To calculate the weighted average number of shares outstanding, we need to consider the time period during which each set of shares was outstanding.
From January 1 to February 28 (59 days), Laurin had 378,000 shares outstanding.
From March 1 to June 30 (122 days), Laurin had 393,800 shares outstanding (378,000 + 15,800).
From July 1 to September 30 (92 days), Laurin had 336,800 shares outstanding (393,800 - 57,000).
From October 1 to December 31 (92 days), Laurin had 404,160 shares outstanding (336,800 + 20% stock dividend).
Next, we calculate the weighted average by multiplying the number of shares outstanding during each period by the respective number of days, summing them up, and dividing by the total number of days in the year (365).
Weighted average = [(59 * 378,000) + (122 * 393,800) + (92 * 336,800) + (92 * 404,160)] / 365
Weighted average ≈ 372,700 shares.
Therefore, Laurin's weighted average number of shares outstanding at December 31, Y4, is approximately 372,700 shares.
To know more about shares, visit:
https://brainly.com/question/32277750
#SPJ11
You are a human resource director for a startup video-game company.
Lately, staff have complained that one of the senior managers has been
making inappropriate comments to female employees. This manager has
occasionally performed below expected job standard. His performance
would improve when informed of his disappointing work. Other concerns
include new staff do not integrate well with existing employees, and many
are having trouble understanding and working with some of the new
software used to manage inventory. Concerns have reached the stage where
you have heard rumors that some employees want to unionize. Using
materials considered throughout the course, discuss what strategies you
would and would not use to address this situation. (10 marks)
As a human resource director for a startup video-game company, if I heard rumors that some employees want to unionize, I would take immediate action to address the situation. I would not ignore the rumors, and I would not try to dissuade the employees from unionizing if that is what they truly want. Instead, I would gather information and try to understand the reasons why they are interested in unionizing. I would have a meeting with the employees to listen to their concerns and find ways to address them.
I would also educate myself on the pros and cons of unions and the legal requirements related to unionization. This would help me determine the best course of action to take, whether it is to support the employees' decision to unionize or to provide alternative solutions to their concerns.
Moreover, I would not engage in any activities that would violate the employees' right to unionize or discriminate against them for their decision. I would ensure that the company complies with all the relevant laws and regulations that govern unionization.
In summary, if I heard rumors that some employees want to unionize, I would take a proactive approach to address the situation. I would not ignore the rumors, and I would not try to dissuade the employees from unionizing if that is what they truly want. Instead, I would gather information, educate myself, and take necessary action while complying with all the relevant laws and regulations.
to know more about video-game company pls visit-
https://brainly.com/question/32018075
#SPJ11
After getting the expected return how do I find the standard
deviation
To find the standard deviation after getting the expected return, you need to follow these steps:
1. Calculate the deviation for each individual return: Subtract the expected return from each actual return. These deviations represent how much each return deviates from the expected return.
2. Square each deviation: To eliminate negative values and give more weight to larger deviations, square each deviation calculated in step 1.
3. Calculate the average of the squared deviations: Add up all the squared deviations and divide by the total number of returns. This gives you the average squared deviation, also known as the variance.
4. Take the square root of the variance: The standard deviation is the square root of the variance. It measures the dispersion or spread of the returns around the expected return.
Here's an example to illustrate the process:
Let's say you have three returns: 5%, 8%, and 10%. The expected return is 7%.
1. Deviations from the expected return: (5% - 7%) = -2%, (8% - 7%) = 1%, (10% - 7%) = 3%.
2. Squared deviations: (-2%)^2 = 4%, 1%^2 = 1%, 3%^2 = 9%.
3. Variance: (4% + 1% + 9%) / 3 = 14% / 3 ≈ 4.67%.
4. Standard deviation: √4.67% ≈ 2.16%.
To find the standard deviation after getting the expected return, calculate the deviation for each individual return, square each deviation, calculate the average of the squared deviations (variance), and take the square root of the variance to get the standard deviation.
The standard deviation is a measure of how much the returns deviate from the expected return. By calculating the deviations, squaring them, and finding the average of the squared deviations, we obtain the variance. Taking the square root of the variance gives us the standard deviation, which represents the dispersion or spread of the returns around the expected return.
Learn more about standard deviation: https://brainly.com/question/13498201
#SPJ11
Suppose the Bank of Canada purchases a Government of Canada bond from Bob for \( \$ 8,000 \). a. What is the name for the Bank of Canada's action?
The Bank of Canada's action of purchasing a Government of Canada bond from Bob is known as an open market operation.
An open market operation refers to the buying or selling of government securities (bonds) by the central bank in the open market. In this case, the Bank of Canada is purchasing a Government of Canada bond from Bob, which means it is buying security directly from an individual or entity.
Open market operations are one of the key tools used by central banks to conduct monetary policy and manage the money supply in the economy. When the central bank buys government bonds, it injects money into the banking system, increasing the reserves of commercial banks and influencing interest rates.
This action is often used to increase the money supply and stimulate economic activity or to provide liquidity to financial institutions.
To learn more about open market operations click here: brainly.com/question/29886606
#SPJ11
The calculations below show a simplified version of a Scanlon Plan being implemented at the ZVX Corporation that employs 500 production employees. Based on these numbers, which of the following statements is true?
Value of Production: $1,000,000
Allowed Payroll Costs: $300,000
Actual Payroll Costs: $100,000
Bonus Pool: $300,000
Company Share: $100,000
Deficit Share: $100,000
Worker Share: $200,000
The deficit share should be $0.
The worker share should be $100,000.
The company share should be $300,000.
The allowed payroll costs should be $500,000.
The bonus pool should be $100,000
Based on the provided calculations for the Scanlon Plan implementation at ZVX Corporation, the statement that is true is: "The allowed payroll costs should be $500,000." The other statements are not accurate based on the given information.
The Scanlon Plan is an employee incentive program that aims to align the interests of employees and the company by linking compensation to productivity or cost-saving measures. In this case, the calculations are as follows:
Value of Production: $1,000,000
Allowed Payroll Costs: $300,000
Actual Payroll Costs: $100,000
Bonus Pool: $300,000
Company Share: $100,000
Deficit Share: $100,000
Worker Share: $200,000
The allowed payroll costs represent the maximum amount the company is willing to allocate towards employee compensation. In this scenario, the allowed payroll costs are $300,000. Therefore, the statement "The allowed payroll costs should be $500,000" is incorrect.
The statement "The deficit share should be $0" is also incorrect, as the calculations indicate that the deficit share is $100,000.
The statement "The worker share should be $100,000" is incorrect as well since the worker share is calculated as $200,000.
The statement "The company share should be $300,000" is accurate based on the given information, as the company share is indeed $100,000.
Finally, the statement "The bonus pool should be $100,000" is incorrect, as the bonus pool is calculated as $300,000.
In summary, based on the provided calculations, the true statement is that the allowed payroll costs should be $500,000. The other statements are not consistent with the given figures.
To learn more about, Scanlon Plan:-
brainly.com/question/31956657
#SPJ11
Choose the correct answer. For a secret key cryptosystem, the strength of the cipher is measured in terms of (a) The number of rounds of operations involved during encryption. (b) The size of each plaintext block during encryption. (c) The size of the random key that is used in encryption. (d) All of the above. (e) None of (a), (b) or (c) (f) Both (a) and (b). (g) Both (b) and (c). (h) Both (a) and (c)
The correct answer is (e) None of (a), (b), or (c).
For a secret key cryptosystem, the strength of the cipher is typically not measured in terms of the number of rounds of operations involved during encryption (a), the size of each plaintext block during encryption (b), or the size of the random key used in encryption (c).
The strength of a secret key cryptosystem is primarily determined by the key length and the algorithm's resistance to various cryptographic attacks. A longer key length generally provides stronger security by increasing the number of possible key combinations, making it more difficult for an attacker to break the encryption.
Other factors that can contribute to the strength of a secret key cryptosystem include the quality of the algorithm design, the resistance to known attacks, and the security of the key management practices.
To learn more about cryptosystem, you can visit
brainly.com/question/31615342
#SPJ11.
Let's say you are an Analyst in one of the FAANG/FAMGA
companies. Your manager asks you to build a model that would look
at a collection of resumes and name the top candidates. You have
been given 10
As an Analyst in a FAANG/FAMGA company, my task is to build a model that can analyze a collection of resumes and identify the top candidates. I will use machine learning algorithms and natural language processing techniques to evaluate the resumes based on relevant criteria and rank them accordingly.
As an Analyst in one of the FAANG/FAMGA companies, if your manager asks you to build a model that would look at a collection of resumes and name the top candidates, you need to follow certain steps to develop an effective model:
Step 1: Collect data: The first step is to gather data about the resumes from various sources, such as job portals, career websites, and LinkedIn profiles.
Step 2: Data cleaning: After collecting the data, the next step is to clean it to remove irrelevant information, such as spelling errors, formatting errors, and duplicates.
Step 3: Feature extraction: In this step, you need to extract relevant features from the resumes, such as education, experience, and skills. These features will be used to build the model.
Step 4: Build the model: In this step, you can use various machine learning algorithms, such as decision trees, random forests, and logistic regression, to build the model. You need to choose the best algorithm based on the nature of the data.
Step 5: Train the model: Once you have built the model, you need to train it using a labeled dataset. This dataset should contain the resumes of the candidates who have been selected in the past.
Step 6: Test the model: After training the model, you need to test it using an unlabeled dataset. This dataset should contain the resumes of the candidates who have not been selected in the past.
Step 7: Evaluate the model: In this step, you need to evaluate the performance of the model based on various metrics, such as accuracy, precision, recall, and F1-score. If the model performs well, it can be deployed to select the top candidates from a collection of resumes.
For more such question on Analyst
https://brainly.com/question/30364965
#SPJ4
If you have a $150,000,30 year fixed-rate fully amortizing mortgage with a 6% annual rate, your accrual and pay rate are for the first month are __ and ___ , respectively
O $750 and $899
O $750 and $750
O $899 and $899
O $899 and $750
The accrual and pay rate for the first month of the mortgage would be $750 and $899, respectively.
The accrual and pay rate for the first month of a $150,000, 30-year fixed-rate fully amortizing mortgage with a 6% annual rate can be calculated as follows:
Step 1: Convert the annual rate to a monthly rate. Divide 6% by 12 to get 0.5% as the monthly interest rate.
Step 2: Calculate the monthly payment using the formula for a fully amortizing mortgage.
The formula is: M = P × r × (1 + r)^n / ((1 + r)^n - 1)
where M is the monthly payment, P is the principal amount (in this case, $150,000), r is the monthly interest rate (0.5% in this case), and n is the total number of monthly payments (30 years × 12 months/year = 360 months).
Using the formula, we have:
M = 150,000 × 0.005 × (1 + 0.005)^360 / ((1 + 0.005)^360 - 1)
M ≈ $899.33
So, the monthly payment (pay rate) for the first month would be approximately $899.33.
Step 3: Calculate the interest portion of the payment (accrual rate) for the first month. Multiply the outstanding balance at the beginning of the month by the monthly interest rate. In the first month, the outstanding balance is the original loan amount of $150,000.
Interest for the first month = $150,000 × 0.005 ≈ $750
Therefore, the accrual and pay rate for the first month of the mortgage would be $750 and $899, respectively.
So the correct answer is: O $750 and $899
Learn more about the mortgage from the given link.
https://brainly.com/question/30093812
#SPJ11
"When you think about a traditional fee-for service insurance
plan or a managed care health insurance
plan, which do you feel is better and why? Provide at least one
advantage of the option you have
Determining whether a traditional fee-for-service insurance plan or a managed care health insurance plan is better depends on individual needs and preferences.
Traditional fee-for-service insurance plans offer more freedom and choice in selecting healthcare providers, but they often come with higher out-of-pocket costs and less emphasis on preventive care. On the other hand, managed care health insurance plans, such as Health Maintenance Organizations (HMOs) or Preferred Provider Organizations (PPOs), focus on managing and coordinating healthcare services for their members. One advantage of a managed care health insurance plan is its emphasis on preventive care. These plans typically offer preventive services, such as vaccinations, screenings, and wellness programs, at little to no cost for the members. By encouraging regular check-ups and preventive measures, managed care plans aim to detect and address health issues early, potentially preventing more serious and costly conditions in the long run.
Managed care plans also prioritize coordination of services. They establish networks of healthcare providers who work together to ensure that patients receive the appropriate care they need. This coordination can help avoid unnecessary tests, duplicate treatments, and improve overall care quality. Additionally, managed care plans often provide care management and care coordination services for individuals with chronic conditions, ensuring they receive ongoing support and monitoring. Ultimately, the choice between a traditional fee-for-service insurance plan and a managed care health insurance plan depends on individual preferences, healthcare needs, and financial considerations. It is essential to carefully evaluate the specific features and benefits of each plan to make an informed decision.
Learn more about insurance here
https://brainly.com/question/27822778
#SPJ11
Evaluate the essential components of a corporate strategy and
how they are related in a project implementation
The essential components of a corporate strategy, such as vision, goals, initiatives, and resource allocation, guide and align the project implementation process.
The essential components of a corporate strategy typically include the following:
Vision and Mission: The vision defines the desired future state of the organization, while the mission outlines its purpose and reason for existence. They provide the overarching direction for the corporate strategy.
Goals and Objectives: Goals are broad, long-term aspirations, while objectives are specific, measurable targets that support the achievement of those goals. They provide focus and clarity to the strategy.
Environmental Analysis: This involves assessing the external environment (market trends, competition, regulatory factors) and internal capabilities (resources, strengths, weaknesses) to identify opportunities and threats.
Strategic Initiatives: These are the specific actions or projects undertaken to implement the corporate strategy. They are designed to address identified opportunities and threats and achieve the set goals and objectives.
Resource Allocation: This involves allocating resources, such as finances, human capital, and technology, to support the strategic initiatives. Effective resource allocation ensures that the necessary means are available for successful implementation.
Performance Measurement and Evaluation: Metrics and indicators are established to monitor and evaluate the progress and effectiveness of the strategic initiatives. This helps in making adjustments and ensuring alignment with the overall strategy.
In project implementation, these components are related as follows:
The corporate strategy provides the overarching framework and direction for the project implementation. The vision, mission, goals, and objectives guide the selection and prioritization of projects aligned with the strategy.
The environmental analysis informs project selection by identifying opportunities and threats. Strategic initiatives are developed based on the goals and objectives, and resource allocation is done to support project implementation.
Performance measurement and evaluation track the progress and outcomes of the projects, ensuring they are aligned with the corporate strategy.
For more question on resource allocation visit:
https://brainly.com/question/24176227
#SPJ11
Which of the following best describes the current view of job enrichment?
a)Job enrichment continues to be a highly successful job design.
b)Nearly all Fortune 500 companies use some form of job enrichment program.
c)Job enrichment has been proven to increase performance, but at the cost of lower satisfaction.
d)Job enrichment has been proven to increase satisfaction, but at the cost of lower performance.
e)Job enrichment has recently fallen into disfavor among managers.
The current view of job enrichment is that it has been proven to increase satisfaction without sacrificing performance.
Job enrichment is a job design strategy that aims to enhance employee satisfaction and motivation by providing them with increased autonomy, responsibility, and opportunities for personal growth and development. The current view on job enrichment is that it has been proven to increase satisfaction without negatively impacting performance. Research and studies have consistently shown that when employees are given more challenging and meaningful tasks, greater decision-making authority, and opportunities for skill development, they experience higher levels of job satisfaction.
This is because job enrichment aligns with the psychological needs of employees, such as autonomy, competence, and relatedness, leading to increased motivation and engagement. In turn, satisfied and motivated employees tend to perform better in their roles, leading to improved organizational outcomes. While it is not accurate to claim that job enrichment is universally successful or widely adopted by all companies (options a and b), it is also not supported by evidence to suggest that job enrichment results in lower satisfaction or performance (options c and d). The notion that job enrichment has fallen into disfavor among managers (option e) is not reflective of the current understanding and application of job enrichment principles.
Learn more about job enrichment here
https://brainly.com/question/8206117
#SPJ11
price floors are instituted because the government wants to:
price floors are instituted by the government to protect producers and ensure they receive a fair income. By setting a minimum price, the government prevents prices from falling too low and provides a safety net for producers.
price floors are instituted by the government to achieve certain objectives in the market. One of the main reasons for implementing price floors is to protect producers and ensure they receive a fair income. When the government sets a minimum price for a product or service, it prevents prices from falling too low, which can be detrimental to producers.
For example, in agricultural markets, price floors are often used to support farmers. By setting a minimum price for crops, the government ensures that farmers can cover their production costs and make a reasonable profit. This helps to stabilize prices and provides a safety net for farmers.
However, it's important to note that price floors can also have unintended consequences. One potential issue is the creation of surpluses. If the minimum price set by the government is higher than the equilibrium price determined by supply and demand, it can lead to an excess supply of the product. This surplus can result in inefficiencies in the market and may require additional government intervention to address.
Learn more:About price floors here:
https://brainly.com/question/32084735
#SPJ11
t/f : shareholders' meetings need not occur at any certain interval.
The statement 'shareholders' meetings need not occur at any certain interval' is false. Shareholders' meetings are typically required to be held at regular intervals and serve as an important platform for shareholder participation in decision-making processes.
Explanation:The statement 'shareholders' meetings need not occur at any certain interval' is false. Shareholders' meetings are an important aspect of corporate governance and are typically required to be held at regular intervals. While the frequency of these meetings may vary depending on the company's bylaws and applicable laws, there are legal requirements for holding shareholders' meetings.
Generally, companies are required to hold an annual shareholders' meeting. This meeting provides an opportunity for shareholders to elect directors, approve financial statements, and make significant corporate decisions. Additional meetings may be called as needed to address specific matters or concerns.
Shareholders' meetings serve as a platform for shareholders to ask questions, voice concerns, and engage with the company's management and board of directors. They play a crucial role in ensuring transparency, accountability, and shareholder participation in the decision-making processes of a company.
Learn more:About shareholders' meetings here:
https://brainly.com/question/27978876
#SPJ11
on the domestic front, carter’s most notable shortcoming was:
Jimmy Carter's most notable shortcoming on the domestic front was his handling of the economy, particularly in addressing stagflation and the energy crisis.
During his presidency, Jimmy Carter faced several challenges on the domestic front. One of his most notable shortcomings was his handling of the economy. Carter inherited an economy plagued by high inflation and unemployment rates, known as stagflation. Despite his efforts to address these issues, his policies, such as the Federal Reserve's tight monetary policy, did not yield the desired results.
Additionally, Carter's energy policies, including the creation of the Department of Energy and the promotion of conservation measures, were met with mixed success. The 1979 energy crisis, marked by skyrocketing oil prices and long lines at gas stations, further highlighted the shortcomings of his energy policies.
Overall, Carter's inability to effectively address the economic challenges and energy crisis during his presidency is considered one of his most notable domestic shortcomings.
Learn more:About Jimmy Carter here:
https://brainly.com/question/31799962
#SPJ11
the organizational pyramid composed of authority levels is commonly called the
The organizational pyramid composed of authority levels is commonly called the hierarchical structure or chain of command.
The organizational pyramid, which is composed of authority levels, is commonly referred to as the hierarchical structure or chain of command. It represents the different levels of authority within an organization, with the top level being the highest authority and the lower levels representing lower levels of authority.
The hierarchical structure helps to establish a clear chain of command, where decisions and instructions flow from the top down. This structure ensures that each level of authority has a specific role and responsibility, and that there is a clear line of communication and accountability.
For example, in a company, the CEO or president occupies the top level of the pyramid, followed by executives, managers, supervisors, and employees at the lower levels. Each level has its own set of responsibilities and reports to the level above it.
Learn more:About organizational pyramid here:
https://brainly.com/question/19861024
#SPJ11
Brislin Company has four operating divisions. During the first quarter of 2020, the company reported aggregate income from operations of $216,400 and the following divisional results. Sales Cost of goods sold Selling and administrative expenses Income (loss) from operations $250,000 204,000 76,600 $ (30,600) Division II $199,000 $499,000 189,000 297,000 54,000 56,000 $ (44,000) $146,000 IV $443,000 246,000 52,000 $145,000 Analysis reveals the following percentages of variable costs in each division. Cost of goods sold Selling and administrative expenses I 71 % 37 II 91% 61 III 81 % 4 9 IV 73 % 5 8 Discontinuance of any division would save 50% of the fixed costs and expenses for that division. Top management is very concerned about the unprofitable divisions (I and II). Consensus is that one or both of the divisions should be discontinued. *a) Compute the contribution margin for Divisions I and II. (Enter negative amounts using either a negative sign preceding the number e.g. -45 or parentheses e.g. (45).) Division I Division II Contribution margin Prepare an incremental analysis concerning the possible discontinuance of Division I. (Round answers to o decimal places, e.g. 1525. Enter negative amounts using either a negative sign preceding the number e.g.-45 or parentheses e.g. (45).) Continue Eliminate Net Income Increase (Decrease) Contribution margin Fixed costs Cost of goods sold Selling and administrative Total fixed expenses Income (loss) from operations Prepare an incremental analysis concerning the possible discontinuance of Division II. (Round answers to o decimal places, e.g. 1525. Enter negative amounts using either a negative sign preceding the number e.g.-45 or parentheses e.g. (45).) Continue Eliminate Net Income Increase (Decrease) Contribution margin Fixed costs Cost of goods sold Selling and administrative Total fixed expenses Income (loss) from operations Your answer is correct. What course of action do you recommend for each division? Division Division II Your answer is partially correct. Try again. Prepare a columnar condensed income statement for Brislin Company, assuming Division 1 is eliminated. Division It's unavoidable fixed costs are allocated equally to the continuing divisions. Round answers to decimal places, .g. 1525 Enter negative amounts using either a negative sign preceding the number eg.-45 or parentheses e.g. (45).) BRISLIN COMPANY CVP Income Statement For the Quarter Ended March 31, 2017 Divisions Sales Variable costs Cost of goods sold Seling and administrative Total variable costs Contribution margin Foxed costs Cost of goods sold Selling and administrative Total fixed costs 154000 44164 FN164 Income (less) operations 27400 45000
To compute the contribution margin for Division I, we need to subtract the variable costs from the sales revenue. The contribution margin is the amount that is available to cover fixed costs and contribute to the company's profits.
For Division I:
Sales: $250,000
Cost of goods sold: $204,000
Selling and administrative expenses: $76,600
Contribution margin = Sales - (Cost of goods sold + Selling and administrative expenses)
Contribution margin = $250,000 - ($204,000 + $76,600)
Contribution margin = $250,000 - $280,600
Contribution margin = $-30,600 (or -$30,600)
For Division II:
Sales: $199,000
Cost of goods sold: $499,000
Selling and administrative expenses: $189,000
Contribution margin = Sales - (Cost of goods sold + Selling and administrative expenses)
Contribution margin = $199,000 - ($499,000 + $189,000)
Contribution margin = $199,000 - $688,000
Contribution margin = $-489,000 (or -$489,000)
Now, let's prepare an incremental analysis for the possible discontinuance of Division I.
To continue Division I, we need to consider its contribution margin and fixed costs. Since Division I has a negative contribution margin, eliminating it would result in a positive impact on the company's net income.
Incremental analysis for Division I:
Continue: -$30,600 (contribution margin)
Eliminate: +$30,600 (contribution margin)
Net Income Increase (Decrease): +$30,600
Next, let's prepare an incremental analysis for the possible discontinuance of Division II.
Incremental analysis for Division II:
Continue: -$489,000 (contribution margin)
Eliminate: +$489,000 (contribution margin)
Net Income Increase (Decrease): +$489,000
Based on the incremental analysis, it is recommended to eliminate Division I as it would result in a net income increase of $30,600. However, Division II should be continued as eliminating it would result in a net income decrease of $489,000.
To prepare a columnar condensed income statement for Brislin Company assuming Division I is eliminated, we need to allocate its fixed costs equally to the continuing divisions.
BRISLIN COMPANY CVP Income Statement
For the Quarter Ended March 31, 2020
Divisions Sales Variable costs Contribution margin Fixed costs
Division II $199,000 $499,000 $-489,000 $0
Division IV $443,000 $246,000 $197,000 $0
Total $642,000 $745,000 $-292,000 $0
The income (loss) from operations is $-292,000.
Know more about contribution margin here:
https://brainly.com/question/31484547
#SPJ11
Short Answer: Answers should be substantive but no more
than a couple of sentences
Discuss the following statement: "Gross profit margin should be
stable for all firms."
It is more appropriate to say that the ideal gross profit margin varies across different industries and firms.
The statement that "Gross profit margin should be stable for all firms" is not entirely accurate. The gross profit margin is a measure of a company's profitability, calculated by dividing gross profit by revenue. While stability in the gross profit margin can be an indication of a well-managed business, it is not necessarily applicable to all firms.
Different industries and business models can lead to variations in gross profit margins. For example, a manufacturing company may have higher costs of goods sold compared to a software company, resulting in different profit margins. Additionally, external factors such as changes in market conditions or competition can impact a firm's gross profit margin.
Therefore, it is more appropriate to say that the ideal gross profit margin varies across different industries and firms.
Learn more about gross profit from the given link
https://brainly.com/question/28390697
#SPJ11
Suppese that a metai rod is supposed to be out 51.8 mm, in length. The upper spec lint is set at 52.9 mm, and the lower spec limit sat at 507 mm. A metal rod that is out of spec must be toreped at a cost of 534.00. The company uses the Taguchi Quality Loss Function to estimale quality costs. Suppose that a sample of three unts was taken, und the rod meseurements were 62.8. 52.4, and 50.4 mm, tespectively. D, and T have the same definitions as in the Taguchi model. What would bo the quality cost of the sample of eree units using Hamys moder? a) The linear Tnguch paranetor T is 5 imm (round your responso to two decimal places)l. b) The Quality Cost of the first metal rod is $ (round your responso to two decimal placee). c) The Guality Cost of the second metal tod is 3 (round your response to two decimal placest. d) The Qualty Cost of the third metal rod is 3 (round your respanse to fwo decimal places). e) What is the total Taguch thike Quality Cost of that sample of three units? 1 (round your response to two decimal places).
a.) The linear Taguchi parameter T is 8.8 mm.
b.) The Quality Cost of the first metal rod is $534.00.
c.) The Quality Cost of the second metal rod is $0.00.
d.) The Quality Cost of the third metal rod is $534.00.
e.) The total Taguchi-like Quality Cost of the sample of three units is $1,068.00.
a) To calculate the linear Taguchi parameter T, we need to find the absolute value of the difference between the measured value and the target value, and then subtract the tolerance value. Let's calculate T:
Measured value = 62.8 mm
Target value = 51.8 mm
Upper specification limit = 52.9 mm
Lower specification limit = 50.7 mm
T = |Measured value - Target value| - (Upper specification limit - Lower specification limit)
= |62.8 - 51.8| - (52.9 - 50.7)
= 11 - 2.2
= 8.8
Therefore, the linear Taguchi parameter T is 8.8 mm.
b) To calculate the Quality Cost of the first metal rod, we need to consider whether it falls within the specification limits. Since 62.8 mm is greater than the upper specification limit of 52.9 mm, it is out of spec and needs to be scrapped.
Therefore, the Quality Cost of the first metal rod is $534.00.
c) To calculate the Quality Cost of the second metal rod, we need to determine whether it falls within the specification limits. Since 52.4 mm is within the range of 50.7 mm to 52.9 mm, it is within spec and does not incur any quality cost.
Therefore, the Quality Cost of the second metal rod is $0.00.
d) To calculate the Quality Cost of the third metal rod, we need to determine whether it falls within the specification limits. Since 50.4 mm is less than the lower specification limit of 50.7 mm, it is out of spec and needs to be scrapped.
Therefore, the Quality Cost of the third metal rod is $534.00.
e) The total Taguchi-like Quality Cost of the sample of three units is the sum of the individual Quality Costs:
Total Quality Cost = Quality Cost of the first metal rod + Quality Cost of the second metal rod + Quality Cost of the third metal rod
= $534.00 + $0.00 + $534.00
= $1,068.00
Therefore, the total Taguchi-like Quality Cost of the sample of three units is $1,068.00.
For more question on Quality Cost visit:
https://brainly.com/question/31416410
#SPJ11
Neverlate Ltd. completed the following transactions involving dellvery trucks: 202θ Mar. 26 Paid cash for a new delivery truck, $195,325 plus $7,775 of freight costs. The truck was estieated to have a five-year life and a $10,696 trade-in value. Dec. 31 Hecorded straight-1ine depreciation on the truck to the nearest whole nonth. 2021 Dec. 31 Reconded straight-1 ine depreciation on the truck to the nearest whole nonth. However, due to new infornation obtained early in January, the original estimated useful Hife of the truck was changed from five years to four years, and the oniginal estimated trade-in value was increased to $14,500. Required: Prepare journal entries to record the transactions. (Do not round intermediate colculations.)
The amounts in the journal entries may vary depending on the specific calculations and rounding methods used.
To record the transactions related to the delivery truck, the following journal entries can be made:
1. March 26:
Truck (Asset) $195,325
Freight Costs (Expense) $7,775
Cash (or Accounts Payable) $203,100
[To record the purchase of a new delivery truck and freight costs.]
2. December 31 (end of 2020):
Depreciation Expense (Expense) $3,114
Accumulated Depreciation (Contra-Asset) $3,114
[To record straight-line depreciation for the truck for the year 2020.]
3. December 31 (end of 2021):
Depreciation Expense (Expense) $42,337
Accumulated Depreciation (Contra-Asset) $42,337
[To record straight-line depreciation for the truck for the year 2021.]
4. January (adjustment):
Depreciation Expense (Expense) $49,269
Accumulated Depreciation (Contra-Asset) $49,269
[To adjust the depreciation expense and accumulated depreciation based on the revised useful life and trade-in value of the truck.]
To know more about expense, visit:
https://brainly.com/question/29850561
#SPJ11
Under the periodic inventory system, the amount of inventory is
A) constantly updated.
B) only known when a physical count is taken.
C) adjusted after each purchase.
D) adjusted after each sale.
The answer is B) only known when a physical count is taken. The amount of inventory is only known under the periodic inventory system after a physical count is performed.
Periodic systems need physical counts and are frequently inconvenient, especially if any recounts are necessary. COGS Accounting: Periodic inventory methods are not coupled with continuous COGS account entries. To ascertain the amount of inventory on hand and the cost of goods sold, a corporation using a periodic inventory system physically counts the inventory at the conclusion of each period. When a physical inventory count is done, a periodic inventory system just updates the ending inventory balance in the general ledger.
Read more about periodic inventory system at
https://brainly.com/question/15139999
#SPJ4
Suppose for every 10 thousand dollar increase in income, consumption increases by 8.6 thousand dollars. What is the marginal propensity to consume? Provide your answer as a percentage rounded to two decimal places. Do not include any symbols, such as "S,""=,""%," or ","in your answer.
–––––
For every $10,000 increase in income, consumption increases by $8,600, which represents an MPC of 86%. The marginal propensity to consume (MPC) is the increase in consumption for every unit increase in income.
In this case, we are given that for every $10,000 increase in income, consumption increases by $8,600. To calculate the MPC, we divide the change in consumption by the change in income. In this case, the change in consumption is $8,600 and the change in income is $10,000.
MPC = Change in Consumption / Change in Income
MPC = $8,600 / $10,000
MPC = 0.86
To express this as a percentage, we multiply the MPC by 100.
MPC = 0.86 * 100
MPC = 86%
Therefore, the marginal propensity to consume in this scenario is 86%.
To know more about the income visit:
https://brainly.com/question/33835902
#SPJ11
1) Which of the following could involve of Rapid 1 point Manufacturing Process? Assembly Line process Smart Virtual factory Ford Freeform Fabrication Technology All of these 2) Which of the following
The following Ford Free form Fabrication Technology may involve a rapid one-point manufacturing process. Option C is correct.
The use of software automation and connected manufacturing equipment to rapidly accelerate the manufacturing process is one broad definition of rapid manufacturing. Rapid manufacturing specifically refers to the on-demand, low-volume production of injection-molded plastic parts for mold makers.
There are a wide range of cycles engaged with fast assembling — added substance fabricating, CNC machining, and quick tooling, for instance. The majority of these methods also use software automation and digital design to speed up the manufacturing process.
Learn more about Manufacturing process:
brainly.com/question/31811647
#SPJ4
Complete question as follows:
1) Which of the following could involve of Rapid 1 point Manufacturing Process?
A. Assembly Line process
B. Smart Virtual factory
C. Ford Free form Fabrication Technology
D. All of these
Did any company's Non-GAAP disclosure stand out for NIO, Ford,
and Tesla as either particularly good or particularly bad?
Note: Look at the above companies Management discussion
analysis, formal susta
After examining the management discussion analysis, the Non-GAAP disclosures of NIO, Ford, and Tesla were not particularly good or particularly bad. Non-GAAP disclosures aim to give investors a better understanding of a company's financial results.
They are a set of metrics that exclude certain items that the company believes do not reflect its normal business operations. NIO, Ford, and Tesla all provided Non-GAAP disclosures in their financial reports for the year 2020, which was consistent with the previous year's financial reports.
In the management discussion analysis, NIO, Ford, and Tesla disclosed their Non-GAAP metrics and explained how they use these measures to analyze their business performance. NIO's Non-GAAP measures included vehicle margin, gross margin, and adjusted net loss, among others.
Ford's Non-GAAP metrics included adjusted EPS, adjusted EBIT, and adjusted automotive operating cash flow, among others. Tesla's Non-GAAP measures included non-GAAP automotive gross margin, non-GAAP net income, and non-GAAP earnings per share, among others.
Non-GAAP measures can be useful for investors when used appropriately, but they can also be misleading when not used correctly. The management discussion analysis provided by NIO, Ford, and Tesla gave a clear explanation of their Non-GAAP metrics and how they are calculated, which is essential for investors to make informed decisions.
Therefore, there was nothing particularly good or particularly bad about their Non-GAAP disclosures, as they were consistent with industry standards and provided adequate information for investors.
Learn more about cash flow here :
https://brainly.com/question/30066211
#SPJ11
the following would be appropriate for the security analyst to coordinate? A. A black-box penetration testing engagement B. A tabletop exercise C. Threat modeling D. A business impact analysis
As a security analyst, all of the options listed (A, B, C, and D) would be appropriate for you to coordinate, depending on the specific circumstances and objectives. Here's a breakdown of each option:
A. A black-box penetration testing engagement:
This involves conducting an assessment of the security of a system or network by simulating a real-world attack from an external perspective without prior knowledge of the system's internals. As a security analyst, coordinating and overseeing this type of engagement would be within your purview.
B. A tabletop exercise:
This is a simulated scenario-based discussion aimed at testing an organization's incident response plans and procedures. It involves key stakeholders discussing and strategizing how they would respond to various security incidents. As a security analyst, you would likely play a significant role in coordinating and facilitating this exercise.
C. Threat modeling:
This is a proactive approach to identify and mitigate potential threats and vulnerabilities in a system or application. It involves assessing the system's architecture, data flows, and potential attack vectors to identify potential weaknesses. As a security analyst, you would typically lead the coordination of threat modeling activities.
D. A business impact analysis:
This process involves assessing the potential impact of disruptions to business operations. It aims to identify critical business functions, quantify the potential financial and operational impacts of disruptions, and prioritize risk mitigation efforts. While a security analyst may contribute to a business impact analysis, it is typically a collaborative effort involving multiple stakeholders, including business continuity and risk management teams.
Learn more about security analyst here : brainly.com/question/31064552
#SPJ11
next dividend payment = $1.87 per share
anticipated growth rate of 4.3%
stock currently sells for $37 per share
3. Stock Values For the company in the previous problem, what is the dividend yield? What is the expected capital gains yield?
The dividend yield is 5.05%. And the expected capital gains yield is 4.3%
Calculation of dividend and expected capital gains is given below steps:
1. To calculate the dividend yield, divide the next dividend payment by the current stock price.
Given that the next dividend payment is $1.87 per share and the stock currently sells for $37 per share, we can calculate the dividend yield as follows:
Dividend Yield = Next Dividend Payment / Current Stock Price
Dividend Yield = $1.87 / $37
Dividend Yield = 0.0505 or 5.05%
So, the dividend yield for this company is 5.05%.
2. To calculate the expected capital gains yield, we need to consider the anticipated growth rate.
Given that the anticipated growth rate is 4.3%, we can calculate the expected capital gains yield as follows:
Expected Capital Gains Yield = Anticipated Growth Rate
Expected Capital Gains Yield = 4.3%
So, the expected capital gains yield for this company is 4.3%.
Learn more about dividend
brainly.com/question/32729754
#SPJ11
The Urivesity of Alabanta has asked you to make a recommendation for the next fleet of vehicles they will buy. The two finalists ate a diesel bus and an ahtemative using recycled fryer grease as fuel. The cocts for each are beilow?
Delsel Bus Grease Bus
Purchase Cost $48.000 $62.000
Operating cost $0.10 per mile $0.06 per mile
Fuel Efficiency 24 MPG 17 MPG
Average FUel Cost $2.75 per gallo $0.14 per gallon
What is the crossover point (in miles) for these alternatives?
The crossover point for these alternatives is the point at which the total costs of both options are equal. To find this point, we need to calculate the total costs for each option and compare them.
Let's start by calculating the total costs for each option. For the diesel bus, we have a purchase cost of $48,000 and an operating cost of $0.10 per mile. For the grease bus, we have a purchase cost of $62,000 and an operating cost of $0.06 per mile.
To calculate the total costs, we need to consider both the purchase cost and the operating cost. For the diesel bus, the total cost can be calculated as follows:
Total cost = Purchase cost + (Operating cost per mile * Number of miles)
Similarly, for the grease bus, the total cost can be calculated as:
Total cost = Purchase cost + (Operating cost per mile * Number of miles)
To find the crossover point, we need to find the number of miles at which the total costs for both options are equal. We can set up an equation to solve for the crossover point:
$48,000 + ($0.10 * Number of miles) = $62,000 + ($0.06 * Number of miles)
Simplifying the equation, we get:
$0.04 * Number of miles = $14,000
Dividing both sides by $0.04, we find:
Number of miles = $14,000 / $0.04
Calculating the result, we find that the crossover point is 350,000 miles.
In summary, the crossover point for these alternatives is 350,000 miles. This means that if the university expects to operate the fleet for more than 350,000 miles, the grease bus would be the more cost-effective option. If the expected mileage is less than 350,000 miles, the diesel bus would be more cost-effective.
Note: The calculation above assumes that the fuel efficiency and fuel cost remain constant over the mileage. In reality, these factors may vary, and it's important to consider other factors like maintenance costs and environmental impact when making a recommendation.
Learn more about Operating cost: https://brainly.com/question/33719768
#SPJ11
As explained in this class, in an asymmetrical joint venture
where one firm is larger and older and the other firm is smaller
and younger, the larger and older firm would most likely be
contributing _
In an asymmetrical joint venture where one firm is larger and older while the other firm is smaller and younger, the larger and older firm would most likely be contributing more resources, expertise, and experience to the joint venture.
The larger and older firm typically has accumulated resources, established market presence, and a wealth of industry knowledge and experience. Due to their size and longevity, they often possess greater financial capabilities, established distribution networks, established brand recognition, and access to a wider customer base. As a result, they can contribute significant assets, such as capital, technology, intellectual property, and market access, which can provide a competitive advantage to the joint venture.
Additionally, the larger and older firm may contribute managerial expertise, industry connections, and established relationships with suppliers and other key stakeholders. They can offer guidance and mentorship to the smaller and younger firm, leveraging their experience to navigate challenges and capitalize on opportunities effectively.
To know more about asymmetrical joint venture please click :-
brainly.com/question/32937603
#SPJ11
"A cash contribution to a qualifying public charity is normally
subject to which AGI limitation?
A. 60%
B. 50%
D. 30%
C. 20%"
The AGI (Adjusted Gross Income) limitation to which cash contributions to a qualifying public charity are subject to is A.60%.
AGI (Adjusted Gross Income) is the sum of income that an individual earned during the year that is eligible for tax assessment. It's a person's gross income after subtracting eligible deductions and other tax write-offs. AGI is the foundation for calculating a taxpayer's federal income tax. It's also used to see whether you qualify for certain deductions and credits.
Learn more about AGI-
https://brainly.com/question/1931633
#SPJ11
If the following conditions are met, an employee will be considered eligible for retrenchment compensation: Employees must be hard workers. To be considered for continuous service, the employee must have worked for a total of 240 days in the previous 12 months or one year.
1)Based on your answer in Question 1 above, explain whether the termination of Anthony, Jamal, Hock Tai and Nora was done properly and with just cause and excuse.
2)If Anthony, Jamal, Hock Tai and Nora are not satisfied with their termination, what can they do? Describe the actions they should take and the evidence they need to have.
In order to determine if the termination of Anthony, Jamal, Hock Tai, and Nora was done properly and with just cause and excuse, we need to assess whether they met the eligibility criteria for retrenchment compensation.
To be eligible for retrenchment compensation, the employees must have worked for a total of 240 days in the previous 12 months or one year. If any of the employees did not meet this requirement, their termination may not be considered proper or justified. It's important to review the employment records of Anthony, Jamal, Hock Tai, and Nora to verify if they fulfilled the condition of working for 240 days in the past 12 months. If any of them did not meet this requirement, their termination may not have been done properly.
If Anthony, Jamal, Hock Tai, and Nora are not satisfied with their termination, they have several actions they can take:
Contact the Human Resources (HR) department or their employer to discuss their concerns and seek clarification on the reasons for their termination. They can request an explanation of why their termination was done and whether it was in compliance with the proper procedures.
Know more about retrenchment compensation:
https://brainly.com/question/32222967
#SPJ11
