What is the weathering process that causes flat horizontal slabs to shift, expand, and uncover underlying rocks as pressure is released? wave action siaking unloading/exfoliation abrasion ice wedging

Answers

Answer 1

The weathering process that causes flat horizontal slabs to shift, expand, and uncover underlying rocks as pressure is released is known as unloading or exfoliation.

Unloading or exfoliation occurs when overlying rocks are eroded or removed, resulting in the release of pressure on the underlying rocks. This reduction in pressure causes the underlying rocks to expand and crack, leading to the detachment of flat, horizontal slabs.
This process is commonly observed in regions with exposed bedrock, such as mountainous areas or rocky landscapes. One example of unloading or exfoliation is the formation of exfoliation domes in granite landscapes. The removal of overlying rocks, either through erosion or human activities, exposes the granite beneath. As the pressure is released, the granite slabs expand and fracture, creating curved and smooth surfaces.
It is important to note that while unloading or exfoliation is a significant weathering process, other factors like abrasion, wave action, ice wedging, and soaking can also contribute to the breakdown and shifting of rocks in different environments. However, in the context of the question, unloading or exfoliation is the most appropriate weathering process.


To learn more about pressure
https://brainly.com/question/87231
#SPJ11


Related Questions

Does there appear to be any precipitation under these clouds? Or is this not the case use for satellite and should you use radar instead?

A)Satellites can detect rain on a local level, so don't use radar

B)Radar can scan by the minute or faster and sees the rainfall below the clouds where satellites can't do the same with accuracy

Answers

B) Radar can scan by the minute or faster and sees the rainfall below the clouds where satellites can't do the same with accuracy.

Radar technology is capable of scanning the atmosphere at a more localized and frequent level, allowing it to detect precipitation beneath the clouds. Satellites, on the other hand, observe cloud cover from a much higher altitude and may not provide accurate information about rainfall below the clouds.

When the goal is to determine if there is precipitation beneath the clouds, radar is the preferred tool over satellites. Radar provides real-time and detailed information about rainfall patterns and intensity at the ground level, offering more accurate and localized data. Satellites, while useful for monitoring cloud cover and larger-scale weather systems, may not provide the same level of accuracy when it comes to detecting precipitation on the surface. Therefore, in this case, radar is the more appropriate choice for assessing precipitation under the clouds.

To know more about rainfall click here:

https://brainly.com/question/2367130

#SPJ11

Which of the following materials is most likely to have the highest porosity?
a) dry, uncompacted clay particles
b) granite with few fractures but very large crystals
c) a limestone that has a few percent open cavities
d) poorly sorted sediment
e) crystalline marble

Answers

Porosity refers to the extent of the open pores and voids within a material. The most probable material to have the highest porosity is a material with a high quantity of open spaces and pores. The correct option is A.

Porosity refers to the fraction of the void space in a material divided by the entire volume of the material. The greater the porosity, the greater the pore space of the material. The material that is most likely to have the highest porosity is dry, uncompacted clay particles. This is because dry, uncompacted clay particles are formed by a very small and fragile aggregation of soil particles and are hence highly porous.

When comparing them to granite, a limestone that has a few percent open cavities, poorly sorted sediment, and crystalline marble, dry, uncompacted clay particles have a higher porosity and, as a result, a higher degree of water retention.  The correct option is A.

Learn more about Porosity

https://brainly.com/question/29311544

#SPJ11

Which of the following types of telescopes can be used ONLY above the Earth's atmosphere?
radio telescope
visible-light telescope
reflector
none of these
x-ray telescope

Answers

Out of the given options, the type of telescope that can be used ONLY above the Earth's atmosphere is the X-ray telescope. Astronomical telescopes are mainly of two types: reflecting and refracting telescopes.

They gather and focus radiation from a distant object to form an image. But, the Earth's atmosphere can cause blurring, or image distortion, when the radiation is refracted, absorbed, or scattered. Thus, space telescopes that function outside of Earth's atmosphere are used.Space telescopes are used for better observation of the universe without atmospheric distortion.

Telescopes used in space include X-ray telescopes, infrared telescopes, gamma-ray telescopes, ultraviolet telescopes, and so on.Out of the given options, the type of telescope that can be used ONLY above the Earth's atmosphere is the X-ray telescope.

Read more about Astronomical here;

#SPJ11

_______ refers to the assumption that the universe is a lawful and orderly place in which all phenomena occur as the result of other events.

Answers

Determinism refers to the assumption that the universe is a lawful and orderly place in which all phenomena occur as the result of other events.

What is determinism?

Determinism is a philosophical belief system that posits that all current events, including human decisions and actions, are predetermined. According to this view, every event and occurrence, including those in human life, is predetermined or caused by other events that have already taken place.

Therefore, determinism assumes that the universe is a lawful and orderly place in which all phenomena occur as the result of other events. It is the principle that everything in the universe has an underlying cause and will continue to behave in a predictable manner until a new factor interferes with its course.

Learn more about Determinism here: https://brainly.com/question/31800144

#SPJ11

Given the pressure gradient magnitude of 20 hPa/1000 km, find
the geostrophic wind speed for a location at 50 °N, with a
temperature of 20 °C, and a pressure of 880 hPa.

Answers

The geostrophic wind speed for a location at 50 °N, with a temperature of 20 °C, and a pressure of 880 hPa is 186.92 m/s.

To calculate the geostrophic wind speed, we need to use the geostrophic wind equation, which relates the pressure gradient and the Coriolis force acting on the air.

The geostrophic wind equation is given by:

Vg = (1/f) * ∂p/∂y

Where:

Vg is the geostrophic wind speed

f is the Coriolis parameter

∂p/∂y is the pressure gradient in the y-direction (north-south direction)

The Coriolis parameter, f, can be calculated using the formula:

f = 2 * Ω * sin(φ)

Where:

Ω is the angular velocity of Earth (approximately 7.292 × 10^(-5) rad/s)

φ is the latitude in radians

First, let's convert the latitude from degrees to radians:

φ = 50° * (π/180) ≈ 0.8727 radians

Now, we can calculate the Coriolis parameter:

f = 2 * 7.292 × 10^(-5) * sin(0.8727) ≈ 1.07 × 10^(-4) s^(-1)

Next, we need to calculate the pressure gradient in the y-direction. Given the pressure gradient magnitude of 20 hPa/1000 km, we can convert it to Pa/m:

∂p/∂y = (20 hPa / 1000 km) * (1000 Pa / 1 hPa) * (1 km / 1000 m) = 0.02 Pa/m

Now we have all the required values to calculate the geostrophic wind speed:

Vg = (1/f) * ∂p/∂y

= (1 / (1.07 × 10^(-4) s^(-1))) * (0.02 Pa/m)

≈ 186.92 m/s

Therefore, the geostrophic wind speed for the given conditions is approximately 186.92 m/s.

Know more about geostrophic wind here

https://brainly.com/question/32220676

#SPJ4

human ancestors developed the tendency to walk on two legs instead of four in order to accommodate ________.

Answers

Human ancestors developed a tendency to walk on two legs instead of four to adapt to the changing environment.

Standing upright provided a wider field of view, allowing early humans to see potential predators and prey from a greater distance. This enhanced visual surveillance was beneficial for survival in open environments. Bipedalism freed the hands to perform other tasks, allowing early humans to carry objects, use tools, and manipulate the environment.

This manual dexterity and tool use played a key role in the fitting's success. Walking on two legs reduces your body's exposure to direct sunlight, reduces heat absorption, and promotes thermoregulation. This adaptation was beneficial in hot savannah environments where thermal management is essential.

To know more about human ancestors visit :

https://brainly.com/question/30708159

#SPJ4

the lambert azimuthal equal area projection is an example of an equivalent projection commonly used in mapping today.
a. true
b. false

Answers

False. The Lambert Azimuthal Equal Area projection is not commonly used in mapping today.

The statement is false. While the Lambert Azimuthal Equal Area projection is an important and widely used projection in cartography, it is not commonly used in modern mapping applications. The projection preserves area, meaning that all regions on the map have the correct relative sizes compared to each other. However, it distorts shape and distance, particularly as one moves away from the center of the projection.

Today, the most commonly used equivalent projection in mapping is the Robinson projection. The Robinson projection strikes a balance between preserving both shape and area, making it suitable for general-purpose maps. It provides a visually appealing representation of the world, with relatively low distortion and a pleasing overall appearance.

Other popular equivalent projections include the Mollweide, Eckert IV, and Winkel Tripel projections, each with their own advantages and compromises in preserving different aspects of the Earth's surface. These projections are commonly used in various mapping applications, including printed maps, online maps, and geographic information systems (GIS).

Learn more about Earth's surface here:

https://brainly.com/question/13459956

#SPJ11

the states where progessivism first gained great influence were

Answers

The states where progressivism first gained significant influence were Wisconsin, Oregon, and California.

Progressivism's influence was not confined to these three states, but Wisconsin, Oregon, and California did play important roles in the early development and implementation of progressive politics in the United States. Each of these states played a key role in promoting progressive ideals and enforcing reforms in the late 19th and early 20th centuries.

Wisconsin, often considered the birthplace of progressiveism, became a hotbed of reform during the tenure of Governor Robert La Follette Sr. in the early 20th century. La Follette's "Wisconsin Ideas" aimed to apply progressive principles to government, emphasizing the importance of public participation, social justice, and efficient administration. Wisconsin introduced many progressive policies, including direct primary law, railroad and public works regulation, labor protection, and income tax reform.

To know more about Progessivism visit :

https://brainly.com/question/14311296

#SPJ4

The correct question is :

The states where Progessivism first gained great influence were _____.


Discuss how recent changes in our view of the applicability of
island biogeography theory have affected the principles and
practice of conservation design.

Answers

Recent changes in our view of the applicability of island biogeography theory have had a significant impact on the principles and practice of conservation design.

Island biogeography theory, originally developed by Robert MacArthur and E.O. Wilson in the 1960s, focused on understanding species diversity and equilibrium on isolated islands. However, its application to fragmented habitats and conservation planning has evolved over time.

One key change is the recognition that habitat fragmentation can have similar effects to islands in terms of reducing species richness and increasing extinction risk. As a result, conservation design now considers not only large, intact habitats but also the connectivity between fragmented habitats.

The focus has shifted towards creating networks of protected areas and corridors to promote gene flow and movement of species. Moreover, the traditional emphasis on species-area relationships in island biogeography has expanded to include other factors such as habitat quality, disturbance regimes, and climate change impacts.

Overall, the evolving understanding of island biogeography theory and its application to conservation design has led to a more comprehensive and dynamic approach to protecting biodiversity. By considering habitat connectivity, ecosystem dynamics, and future environmental changes, conservation efforts can be better tailored to preserve species and ecosystems in a rapidly changing world.

To learn more about biogeography theory

https://brainly.com/question/30099689

#SPJ11

t/f: the turbulent water created by breaking waves is called surf.

Answers

The turbulent water created by breaking waves is indeed called surf. The statement is True.

When waves approach shallow water or encounter an obstacle such as a reef or shoreline, they start to break, causing the water to become agitated and form a turbulent mass of foam and spray. This turbulent water, commonly referred to as surf, is characterized by its powerful and dynamic nature. Surfers often seek out these breaking waves to ride and engage in the sport of surfing.

The term "surf" can also be used to describe the activity of riding waves using various types of watercraft, such as surfboards, bodyboards, or paddleboards. The statement is True.

Learn more about turbulent water

https://brainly.com/question/4405304

#SPJ11

Which of the following is NOT one of the 3 factors of the wind that influence wave height

Group of answer choices

A. fetch

B. strength of the wind

C. time of day

D. length of time the wind blows

Answers

Answer:

It is length of time the wind blows

an observer in earth's northern hemisphere is looking directly towards polaris. in what direction is this observer facing?

Answers

An observer in the northern hemisphere of the Earth looking directly at the North Star, also known as the Pole Star, is looking north.

The North Star is the star closest to the celestial North Pole. Due to the tilt of the Earth's axis, the North Pole is tilted toward the North Star. This means that a person facing the North Star in the Northern Hemisphere is basically looking in the direction of the North.

Polaris serves as a reliable celestial reference point for navigation and orientation. Because of its position near the celestial north pole, it appears nearly stationary in the night sky while other stars appear to revolve around it. For this reason, Polaris is a helpful guide in determining direction, especially north.

To know more about hemisphere visit :

https://brainly.com/question/501939

#SPJ4

5 Factors that influence development

Answers

Human development refers to the process through which people acquire physical, intellectual, and social skills and qualities that enable them to function effectively within society. Several factors, both genetic and environmental, can influence human development.

In this post, we'll take a closer look at five major factors that influence human development.

1. Genetics: Genetics plays an essential role in determining a person's physical characteristics and intellectual abilities. Human traits are inherited through genes that are passed down from parents to offspring. These genes determine things like a person's eye and hair color, height, body type, and intelligence.

2. Environment: Environmental factors, such as nutrition, exposure to toxins, and the quality of medical care, can also influence human development. Nutritious foods can aid in the development of strong, healthy bodies, while exposure to toxic substances can impair cognitive function.

3. Parenting Style: Parenting style also has a significant impact on human development. Authoritarian parents, for example, often have children who are less confident and more prone to anxiety. By contrast, authoritative parents tend to raise children who are more confident and better able to handle stress.

4. Education: Education also plays a critical role in human development. Children who receive a quality education are better equipped to navigate the world and pursue their goals, while those who lack access to education may struggle to reach their full potential.

5. Socioeconomic Status: Socioeconomic status is another major factor that influences human development. People from lower socioeconomic backgrounds often face significant barriers to success, including poor access to medical care, education, and job opportunities. As a result, they may struggle to achieve their goals and realize their full potential.

Overall, human development is influenced by a wide range of factors, including genetics, environment, parenting style, education, and socioeconomic status. By understanding these factors and their impact on human development, we can work to create a more equitable and supportive society that enables all people to thrive and reach their full potential.

Know more about Human development here :

brainly.com/question/29053329

#SPJ8

The land area in a region that is producing resources and absorbing pollution

Biocapacity

Ecological Footprint

The Commons

Environmental Impact

How much forest cover does Canada currently have compared to the forests that covered Canada in the 1600s?

1%

50%

5%

70%

Answers

Canada currently has far less forest cover then it did in the 1600s. A report from Forestry Canada shows that while in the 1600s, forest cover was estimated to be 70%, Canada now only has around 1% of the forest cover that it used to.

Correct option is D. 70%

This large decrease in forest cover can largely be attributed to deforestation resulting from the logging industry, Urbanization and development, and other human causes. The draining of wetlands and other ecosystems which housed large forests has contributed to this huge decline.

It is estimated that between 1900 and 2000, Canada lost an estimated 1.3 million hectares of its forest cover per year due to deforestation. Additionally, the effects of climate change, such as drought and extreme weather events, have contributed to decreases in forest cover in some areas of Canada.

The effects of this dramatic decline in forest cover has had a devastating impact on biodiversity, soil health and even air quality, as trees play an important role in absorbing pollutants. The decrease in forest cover in Canada is a serious environmental concern, and needs to be addressed through reforestation efforts and other sustainable development initiatives.

Correct option is D. 70%

know more about Forestry here

https://brainly.com/question/21242393#

#SPJ11

what causes the volcanoes and deep valleys of east africa?

Answers

The volcanoes and deep valleys of East Africa are primarily caused by tectonic activity associated with the East African Rift System.

This region is located at the intersection of three tectonic plates: the African Plate, the Arabian Plate, and the Somali Plate.

The East African Rift System is a divergent boundary where these plates are moving away from each other. As the plates separate, the lithosphere, which is the Earth's outermost layer, thins and weakens. This thinning and weakening create fractures and faults in the Earth's crust.

Magma from the mantle rises to fill the gaps created by the separation of the plates. The upward movement of this molten rock results in volcanic activity. The volcanoes of East Africa, such as Mount Kilimanjaro and Mount Kenya, are formed by the eruption of this magma.

Alongside the volcanic activity, the East African Rift System also leads to the formation of deep valleys and rift valleys. The stretching and pulling apart of the crust create a series of parallel faults and fractures. Over time, erosion by rivers and other natural forces deepens these fractures, forming the valleys and rifts.

The combination of ongoing tectonic activity and erosion processes contributes to the impressive volcanic landscapes and deep valleys that are characteristic of East Africa.

To learn more about volcanoes, refer to the link:

https://brainly.com/question/25121802

#SPJ4

The right circular cylinder shown in the diagram has a height of 5 cm and a radius of 2 cm what is the volume of this cylinder to the nearest 10th

Answers

The volume of the right circular cylinder is approximately 62.8 cm³.

1. Recall the formula for the volume of a right circular cylinder: V = πr²h, where V is the volume, r is the radius, and h is the height.

2. Substitute the given values into the formula: V = π(2 cm)²(5 cm).

3. Calculate the square of the radius: (2 cm)² = 4 cm².

4. Multiply the squared radius by the height: V = π(4 cm²)(5 cm).

5. Multiply the numerical values: V = π(20 cm²).

6. Multiply 20 cm² by the value of π. Approximate the value of π to 3.14: V = 3.14(20 cm²).

7. Multiply 3.14 by 20 cm²: V ≈ 62.8 cm³.

8. Round the result to the nearest tenth: V ≈ 62.8 cm³.

Therefore, the volume of the right circular cylinder, to the nearest tenth, is approximately 62.8 cm³.

For more such questions on volume, click on:

https://brainly.com/question/32185213

#SPJ8

What evidence is there for considerable extra mass within galaxies that does not produce visible light, the so-called "dark matter?

• The rotation curve of galaxies, showin g orbital speeds of material, remains flat to large distances from the galactic centers, and does not follow a Keplerian curve

• the appearance of many very dark spots within the galaxy, evidence
• widespread evidence for gravitational lensing of background stars in a galaxy by massive, but invisible, objects in the foreground
• intense output of X rays from very hot gas between the stars, originating in otherwise dark regions of numerous low-mass black holes scattered throughout the galaxy

Answers

The evidence for considerable extra mass within galaxies that does not produce visible light is called "dark matter." The following are the pieces of evidence for the existence of dark matter:

1. The rotation curve of galaxies, showing orbital speeds of material, remains flat to large distances from the galactic centers, and does not follow a Keplerian curve.

2. The appearance of many very dark spots within the galaxy, evidence of the blocking of light by dust and gas clouds.

3. Widespread evidence for gravitational lensing of background stars in a galaxy by massive, but invisible, objects in the foreground.

4. Intense output of X-rays from very hot gas between the stars, originating in otherwise dark regions of numerous low-mass black holes scattered throughout the galaxy.

These are the provided evidences for existence of dark matter.

learn more about dark matter here:

https://brainly.com/question/24197345

#SPJ11

Which of the statements below best describes a deep-ocean trench? A. An elongated depression in the sea floor produced by the downward bending of the ocean crust during subduction. B. A down-faulted linear structure along the axis of the mid-ocean ridge system along which sea-floor spreading is taking place. C. An elevated region on the ocean floor at the boundary between two diverging tectonic plates where new ocean crust is formed from upwelling magma. D. A large, relatively flat elevated area on the sea floor that is higher than the surrounding relief with one or more steep sides.

Answers

A deep-ocean trench is an elongated depression in the sea floor produced by the downward bending of the ocean crust during subduction.

A deep-ocean trench is best described as an elongated depression in the sea floor. This depression is formed as a result of the subduction process, where one tectonic plate is forced beneath another plate. When an oceanic plate converges with a continental plate or another oceanic plate, the denser oceanic plate sinks beneath the other plate in a process known as subduction.

This downward movement causes the oceanic crust to bend and form a deep trench on the sea floor. These trenches are typically located in subduction zones, which are areas where tectonic plates collide. Examples of deep-ocean trenches include the Mariana Trench in the western Pacific Ocean and the Peru-Chile Trench in the eastern Pacific Ocean.

To know more about deep-ocean trench , click here.

https://brainly.com/question/1224612

#SPJ4

during the ______, the sun's direct rays fall on equator, and the length of day and night is equal everywhere.

Answers

During the Equinox, the sun's direct rays fall on the equator, and the length of day and night is equal everywhere. Hence, the answer to your question is Equinox.

An equinox occurs when the plane of the Earth's Equator is aligned with the center of the Sun.

On this day, the sun is exactly above the Equator, and both the North and South Poles are equally illuminated.

The word 'equinox' comes from the Latin word for 'equal night,' and on this day, day and night are both 12 hours long everywhere in the world.

Given that an equinox happens twice every year, in March and September. The March Equinox is also known as the Vernal Equinox, while the September Equinox is known as the Autumnal Equinox.

Hence, during equinox every year when the length of day and night is almost equal everywhere.

learn more about Equinox here:

https://brainly.com/question/2657886

#SPJ11

Which of the following statements about crystals is false?
A. Although made of a regular arrangement of atoms, most crystals do not consist of repeated unit cells.
B. The unit cell of a quartz crystal is a silica tetrahedron
C. The least symmetrical arraignments of atoms are found in the triclinic crystal system
D. Minerals from any of the six crystals systems can develop euhedral crystals
E. If the most symmetrical crystal in the world was spherically shaped, it would still be placed in the cubic crystal system.

Answers

The false statement about crystals is: A. Although made of a regular arrangement of atoms, most crystals do not consist of repeated unit cells.

Crystals are solid materials that are formed by a regular, repeating arrangement of atoms, ions, or molecules in three dimensions. This arrangement is known as a crystal lattice, and it is made up of repeated units called unit cells.

Each unit cell represents the fundamental building block of the crystal structure, and when combined in a repetitive pattern, they give rise to the overall crystal lattice.

Options B, C, D, and E are true statements about crystals:

B. The unit cell of a quartz crystal is a silica tetrahedron.

Quartz is a mineral composed of silicon dioxide (SiO2) and has a crystal structure based on the silica tetrahedron. The unit cell of quartz consists of a repeating arrangement of silica tetrahedra.

C. The least symmetrical arrangements of atoms are found in the triclinic crystal system.

The triclinic crystal system is the least symmetrical among the seven crystal systems. It has no restrictions on the angles between crystal axes, and all crystallographic axes have different lengths. The triclinic system exhibits the lowest degree of symmetry.

D. Minerals from any of the six crystal systems can develop euhedral crystals.

Euhedral crystals are well-formed crystals that exhibit clear and defined geometric shapes. Minerals from any of the six crystal systems (cubic, tetragonal, orthorhombic, monoclinic, triclinic, and hexagonal) can develop euhedral crystals under favorable conditions.

E. If the most symmetrical crystal in the world was spherically shaped, it would still be placed in the cubic crystal system.

The cubic crystal system possesses the highest degree of symmetry among the seven crystal systems. Even if a crystal were to have a spherical shape, it would still fall under the cubic crystal system because a perfect sphere exhibits cubic symmetry.

To learn more about crystal, refer to the link:

https://brainly.com/question/30189175

#SPJ4

compare and contrast comets, asteroids, and meteoroids.

Answers

Comets, asteroids, and meteoroids are all celestial bodies that are found in space. They differ from one another in various ways.

Below is a comparison between comets, asteroids, and meteoroids: CometsComets are celestial bodies made of dust, ice, and rock. They travel through space and produce a visible coma or a tail when they come closer to the sun due to the heat of the sun. Comets are larger than meteoroids, with a typical size ranging from 5 kilometers to 10 kilometers. Comets move on an elliptical orbit, and their tail always points away from the sun. Asteroids Asteroids, also known as minor planets, are rocky celestial bodies that revolve around the sun. They are small, and their sizes range from a few meters to hundreds of kilometers.

Asteroids orbit around the sun on their own or are found clustered in a region called the asteroid belt between Jupiter and Mars. Unlike comets, asteroids don't have a tail or a coma. Meteoroids Meteoroids are small celestial objects that travel through space. They are smaller than asteroids, with a size ranging from a few micrometers to a few meters. Meteoroids come from asteroids and comets, and when they enter the Earth's atmosphere, they burn up due to the heat of the friction produced by the air.

This creates a bright streak of light called a meteor or shooting star. In conclusion, comets, asteroids, and meteoroids differ in their composition, size, and characteristics. Comets are made of ice, dust, and rock and have a visible tail when they approach the sun. Asteroids are rocky and orbit around the sun, either on their own or in the asteroid belt. Meteoroids are small celestial bodies that come from asteroids and comets and create a bright streak of light when they burn up in the Earth's atmosphere.

Learn more about asteroids

https://brainly.com/question/32006135

#SPJ11

Discuss the process of the formation of a planet.
2. Discuss how planet Earth was formed. 3. Summarize the whole video from start to end. Write down important key points of the video, it may be regarding to the formation of a planet and the Earth.

Answers

1. The formation of a planet involves several key steps. It begins with the collapse of a giant molecular cloud composed dust. 2. The video provides an overview of the formation of planets on the specific case of planet Earth.

1. Gravitational forces cause the cloud to condense, forming a rotating disk known as a protoplanetary disk. Within this disk, tiny dust particles collide and stick together, forming larger bodies called planetesimals. Through further collisions and gravitational interactions, planetesimals grow into protoplanets.

2. The video provides an overview of the formation of planets and focuses on the specific case of planet Earth. Key points covered in the video include:

Planets form from the collapse of giant molecular clouds. The formation process involves the condensation of gas and dust into a protoplanetary disk. Within the disk, planetesimals form through collisions and aggregation of dust particles. Protoplanets continue to grow through further collisions and gravitational interactions.

The video provides a comprehensive overview of planet formation and highlights the specific aspects of Earth's formation and its suitability for sustaining life.

To learn more about planet

https://brainly.com/question/2416557

#SPJ11

which list the number least to greast -5 1 3 -2

Answers

Answer:-5, -2, 1, 3

Explanation: By looking at the order of numbers you see that -5 is the lowest number value with 3 being the highest

Let's look at the size of rain and how raindrops fall first.
We'll need the Sun when the sun shines on water on the Earth's surface. The heat of the Sun
warms the water and turns it into an invisible gas called water vapour.
The process when the water changes into gas is called evaporation because gases are lighter than
liquids. Water vapour rises up into the sky and the further it move up and away from the Earth's
surface, the colder temperature it gets. So, in the sky, the water vapour cools and changes back
into tiny water droplets. This change is called condensation, and it is the opposite of evaporation.
Clouds are made up of tiny water droplets when condensation occurs in the sky clouds form and
grow. When water droplets bump into one another, they stick together and grow in size they
continue to grow until they are too heavy and fall as rain. They even grow. They bump into one
another on their journey from the cloud to the ground and every single raindrop that reaches the
ground is made up of 1 million of the original tiny water droplets.
Raindrop fall on the ground surface or the Sun can shine on them and the whole process happens
again. This is called the water cycle and keeps water moving from the ground to the sky
providing the water needed for plants, animals and people to survive.

1. What does the water vapour mean?
a. Invisible gas of the sun
b. Very tiny particle of water in the air
C. Gas particle in the air
d. The atmosphere

2. what makes water turn into vapour
a. the air
b. the clouds
c. the sun
d. the earth

3. from the first paragraph we can conclude
a. The size of rain and how raindrops fall
b. The Sun produces the invisible gas
c. The Sun is the main factor of evaporation process
d. Water turns into gas because of Earth's surface

4. "The process when the water changes into gas is called evaporation ..." (Paragraph 2)
The underlined word is the antonym of .....
a. Solidification
b. Condensation
c. Desiccation
d. Vaporization

5. Why does water vapour change into water droplets in the sky?
Because the temperature isn't cold
b. Because the temperature is hot
c. Because the temperature is sizzling
d. Because the temperature is frosty

6. The process of changing from water vapor into water droplets is called .....
a. Solidification
b. Condensation
c. Desiccation
d. Evaporation

7. What will happen when condensation occurs in the sky?
Clouds will evaporate
b. Clouds will form and grow
c. Clouds will make tiny water droplets
d. The rain will fall from the sky

8. According to the text, what is final process before the rain falls?
a Clouds form and grow
b. Water droplets bond one together
C. Clouds bump into one another and they stick together
d. Water evaporates to the sky

9......their journey from the cloud to ground....." (Paragraph 3)
The word "their" refers to ....
a. Rain
b. Condensation
C. Clouds
d. Water droplets

10. What does the last paragraph tell you about? ?
a. Plants, animals and people need water to survive
b. Raindrops fall on the ground
c. Water cycle
d. The process of water moving from the ground to sky

Answers

1.Gas particle in the air. 2.The sun. 3.The Sun is the main factor of the evaporation process.4.Condensation. 5.Because the temperature is frosty. 6.Condensation.7.Clouds will form and grow.



1: Water vapor refers to the gas state of water molecules present in the air. It is formed when water evaporates and rises into the atmosphere. 2: The heat from the sun causes water to evaporate, turning it into water vapor. 3: The first paragraph explains how the heat of the Sun warms the water and turns it into water vapor through the process of evaporation.


4: The word "evaporation" refers to the process of water changing from a liquid state to a gas state, while "condensation" refers to the process of water vapor changing back into a liquid state. 5: As water vapor rises into the sky, the temperature decreases, causing the water vapor to cool and condense into tiny water droplets.


6: Condensation is the process in which water vapor changes back into liquid water to form water droplets. 7: When condensation occurs in the sky, the tiny water droplets come together to form clouds. 8: As water droplets in the clouds bump into one another, they stick together and grow in size until they become too heavy and fall as rain.


9: The word "their" refers to the water droplets that are on their journey from the cloud to the ground. 10: The last paragraph explains that the whole process of water evaporating from the ground, forming clouds, and falling back to the ground as rain is called the water cycle. It highlights the importance of the water cycle for providing water for plants, animals, and people to survive.

To know more about Clouds visit.

https://brainly.com/question/1558130

#SPJ11

Submarine canyons are features associated principally with the continental slope; some are associated with past or present rivers.
True or false?

Answers

The given statement, "Submarine canyons are features associated principally with the continental slope; some are associated with past or present rivers," is true because these canyons are deep, steep-sided valleys that cut into the continental shelf and extend down the continental slope into the deep ocean floor.

They are often formed through various geological processes, including erosion by turbidity currents or underwater landslides. While submarine canyons are typically associated with the continental slope, it is also true that some of these canyons are associated with past or present rivers.

In certain cases, river systems on land can extend their course into the continental shelf and carve out canyons that continue underwater. These river-associated submarine canyons provide a direct connection between terrestrial river systems and the deep ocean environment.

To know more about Submarine canyons, click here.

https://brainly.com/question/28289677

#SPJ4

a) Clear ir 1 with current divider b) Clear ir5/with LCK and ohms law.

Answers

Current divider is a circuit composed of two resistors connected in series across a voltage source. When a voltage is applied across the two resistors, the current is divided between them.

The current through each resistor is inversely proportional to its resistance. This means that if resistance is doubled, the current is halved. Applying this principle to the current through R1 in the circuit shown, the current through R1 can be determined using Ohm’s law,

I1 = V/R1

In the case of the LCK circuit, the current is determined by the voltage across the inductor and the capacitance. The relationship between these parameters is given by

I =C×V/2×pi×f,

where C is the capacitance, V is the voltage and f is the frequency. Substituting this into Ohm’s law and solving for the current,

I2 = V/R2 = C×V/2×pi×f×R2.

Therefore, the current through R2 can be determined using the capacitance, voltage, and the resistance.

To know more about Current divider, click here:

https://brainly.com/question/30637028

#SPJ4

the thematic apperception test (tat) was created by

Answers

The Thematic Apperception Test (TAT) was created by psychologists Henry A.

Murray and Christiana D. Morgan. Developed in the 1930s, the TAT is a projective psychological test used to assess a person's personality, motivations, and emotional state. Murray and Morgan aimed to create a tool that would elicit individuals' underlying thoughts, desires, and conflicts by presenting them with ambiguous pictures and asking them to create stories about the depicted scenes.

The TAT has been widely used in clinical and research settings to gain insights into a person's unconscious thoughts and emotions, providing valuable information for psychological assessment and understanding human behavior.

Learn more about psychologists

https://brainly.com/question/30836688

#SPJ11

Complete Question:

The Thematic Apperception Test (TAT) was created by whom?

FILL THE BLANK.
______ is the deepest spot in the ocean. The Hudson Canyon The Grand Canyon The Mariana Trench The middle of the Atlantic Ocean Just offshore of California.

Answers

The Mariana Trench is the deepest spot in the ocean. Located in the western Pacific Ocean.

it stretches for approximately 2,550 kilometers (1,580 miles) and reaches a maximum depth of about 11,034 meters (36,201 feet) at the Challenger Deep. This astonishing depth makes it the lowest point on Earth's surface. The Mariana Trench is a result of the complex tectonic activity in the area, where the Pacific Plate is being subducted beneath the Mariana Plate.

This remarkable geological feature is home to unique ecosystems adapted to extreme conditions, including high pressure and total darkness. The exploration of the Mariana Trench remains a captivating endeavor for scientists and explorers alike.

Learn more about geological

https://brainly.com/question/16955499

#SPJ11

small pressure above or below atmospheric pressure is primarily measured in

Answers

Small pressure variations above or below atmospheric pressure are typically measured using devices called pressure gauges or pressure transducers. These instruments are designed to detect and quantify slight changes in pressure.

Pressure gauges are commonly used to measure small pressure differentials, such as those encountered in ventilation systems, pneumatic systems, and industrial processes.

They consist of a sensing element, often a diaphragm or a Bourdon tube, that deforms in response to pressure changes. This deformation is then converted into a readable measurement, typically displayed on a dial or electronically.

Pressure transducers, on the other hand, are electronic devices that convert pressure into an electrical signal.

They often utilize strain gauges or piezoelectric sensors to detect minute changes in pressure and transform them into proportional voltage signals.

These signals can be further processed, amplified, and displayed on digital readouts or integrated into control systems.

Both pressure gauges and transducers are capable of accurately measuring small pressure variations above or below atmospheric pressure, providing crucial information for various applications in industries, research, and monitoring systems.

To know more about pressure refer here:

https://brainly.com/question/30698101#

#SPJ11

Do some research on the agronomic revolution. explain what it is and how ecosystems changed across the ediacaran-cambrian transition. how might this event have affected the fossil record of early cambrian life?

Answers

The agronomic revolution refers to the changes in agricultural practices during the Neolithic period. The Ediacaran-Cambrian transition witnessed significant changes in ecosystems, which influenced the fossil record of early Cambrian life. The emergence of hard-bodied organisms during this transition led to the preservation of a wider range of fossils, resulting in a more abundant and diverse fossil record of early Cambrian life.

The agronomic revolution refers to the transformation in agricultural practices that took place during the Neolithic period. It marked a shift from a nomadic hunter-gatherer lifestyle to settled farming communities. This revolution involved the domestication of plants and animals, the development of irrigation systems, and the use of advanced tools for farming.

The Ediacaran-Cambrian transition, which occurred around 541 million years ago, was a critical period in Earth's history. It saw a significant diversification of life forms and the emergence of complex ecosystems. During this time, the environment underwent substantial changes, including increased oxygen levels, changes in ocean chemistry, and the evolution of predatory organisms.

These changes in ecosystems across the Ediacaran-Cambrian transition had profound impacts on the fossil record of early Cambrian life. Prior to this transition, the fossil record primarily consisted of soft-bodied organisms, known as the Ediacara biota. However, with the changes in the environment, the Cambrian explosion occurred, leading to the rapid appearance and diversification of hard-bodied organisms with mineralized skeletons.

The emergence of hard-bodied organisms resulted in the preservation of a wider range of fossils in the rock record. The presence of shells, exoskeletons, and other mineralized structures increased the likelihood of fossilization. As a result, the fossil record of early Cambrian life became more abundant and diverse, providing valuable insights into the evolution of early animal life.

To learn more about ecosystems click here:

https://brainly.com/question/30187156#

#SPJ11

Other Questions
The model of effective change implementation suggests introducing a new structure, such as a balanced scorecardmeasurement system, would be consideredSelect one:O a.a process-driven approachO b.an example of task alignmentO C.an accurate, content-driven move d. an implementation trap. In an article, Evans and Schwab (1995) studied the effects of attending a Catholic high school on the probability of attending college. For concreteness, let college be a binary variable equal to unity if a student attends college, and zero otherwise. Let CathHS be a binary variable equal to one if the student attends a Catholic high school. A regression model is: college =0+1 CathHS + other factors +ut where the other factors include gender, race, family income, and parental education. (i) Why might CathHS be correlated with ut ? (3 marks) (ii) Evans and Schwab have data on a standardized test score taken when each student was a sophomore. What can be done with these variables to improve the ceteris paribus estimate of attending a Catholic high school? (3 marks) (iii) Let CathRel be a binary variable equal to one if the student is Catholic. Discuss the two requirements needed for this to be a valid IV for CathHS in the preceding equation. Which of these can be tested? (3 marks) (iv) Not surprisingly, being Catholic has a significant effect on attending a Catholic high school. Do you think CathRel is a convincing instrument for CathHS? (3 marks) (v) Give an example of two variables that you would include in the variable otherfactors. ( 3 marks) (vi) Which test would you implement in Stata to test if these two variables (that you specified in part (v)) affect college? ( 3 marks) pam's pet palace is considering an investment in dog grooming equipment that would increase cash receipts by $12,000 annually. the initial cost of the equipment is $50,000 4. The charge density over a surface (the XY plane) is given by = (x 2 +x+1)(y 2 +2)1 . Calculate the 2D gradient by using =( x ; y ) and hence determine the position on the XY plane where the charge density is a maximum. Write a C++ program to display Names, Rollno and Grades of 3 students who have appeared in the examination. Declare the class of name, rollno and Grade. Create an array of class objects. Read and Display the contents of the Array. The period of y = 3cot(4x - 3x) is please solveA pair of similar triangles is shown. Find the measure of the segment marked with the letter \( b \). 9. (6 points) What is the semantic difference in a MongoDB query between the following two expressions? I.e., what does each mean, and how are these meanings different? {a: {b: value}} {a.b: value} The prevalence of database use and data mining raises numerous issues related to ethics and privacy. Discuss the following:Is your privacy infringed if data mining reveals certain characteristics about the overall population of your community?Does the use of data promote good business practice or bigotry?To what extent is it proper to force citizens to participate in a census, knowing that more information will be extracted from the data than is explicitly requested by the individual questionnaires?Does data mining give marketing firms an unfair advantage over unsuspecting audiences?To what extent is profiling good or bad? The manager of the company for which you work, asks you: What is the correct way to carry out a time study with a stopwatch, in order to establish the standard time of an operation in which an assembly piece is produced? Given this query, the manager asks him to prepare a talk in which he discusses and numerically demonstrates the time study process that will allow establishing a statistically validated standard time. Follow each and every one of the elements or aspects that make a stopwatch time study correct, statistically based and valid to establish the standard time of the assembly part. Develop the numerical example that allows you to present to your superior the time study process for the assembly part and establishment of the standard time. Discuss concepts, steps, procedure, rigor of time study with stopwatch, among other aspects, with engineering foundation. Can you explain that how these codes convert data to binary please ?void send_byte(char my_byte){digitalWrite(LED_PIN, LOW);delay(PERIOD);//transmission of bitsfor(int i = 0; i < 8; i++){digitalWrite(LED_PIN, (my_byte&(0x01 True or False10. The key figure "return on equity" must always be positive. 11. Taking out loans can impair independence, as the company can no longer freely dispose of the assets that are provided as collateral. On theother hand, large lenders often demand a say. 12. Market transparency means that companies have to report prices to the cartel office within two weeks. 13. The minimax rule is a decision rule for decisions under security, whereby that alternative is taken into account, which offers the maximum resultwith the minimum effort. 14. If more than the critical quantity is produced, the investment alternative with the lower fixed costs should be selected. 15. Internal accounting is required by law for companies.) 16. Lowering a company's fixed costs should reduce the break-even point. 17. An investment is the long-term investment of money capital exclusively in fixed assets.. Find solutions for your homeworksciencephysicsphysics questions and answers1. if we have a box of a dozen resistors and want to connect them together in such a way that they offer the highest possible total resistance, how should we connect them? if we had a box of a dozen resistors and wanted to connect them together in such a way that they would offer the highest possible resistance, we would use a series connection. 2. if we nowThis problem has been solved!You'll get a detailed solution from a subject matter expert that helps you learn core concepts.See AnswerQuestion:1. If We Have A Box Of A Dozen Resistors And Want To Connect Them Together In Such A Way That They Offer The Highest Possible Total Resistance, How Should We Connect Them? If We Had A Box Of A Dozen Resistors And Wanted To Connect Them Together In Such A Way That They Would Offer The Highest Possible Resistance, We Would Use A Series Connection. 2. If We NowShow transcribed image textExpert AnswerTop Expert500+ questions answeredIf we now want to connect thoseView the full answerTranscribed image text:1. If we have a box of a dozen resistors and want to connect them together in such a way that they offer the highest possible total resistance, how should we connect them? If we had a box of a dozen resistors and wanted to connect them together in such a way that they would offer the highest possible resistance, we would use a series connection. 2. If we now want to connect those same resistors together such that they have the lowest possible resistance, how should we connect them? An element, X has an atomic number 43 and a atomic mass of 126.201 u. This element is unstable and decays by - decay, with a half life of 89d. The beta particle is emitted with a kinetic energy of 8.24MeV. Initially there are 5.49102 atoms present in a sample. Determine the activity of the sample after 110 days (in Ci ). Acts of genius that are widely acclaimed by society as having great merit are instances ofa. historical creativityb. process creativityc. unconscious problem solvingd. intervention by Muses Suppose that the current spot exchange rate is 0.80/$ and the three-month forward exchange rate is 0.7813/$. The three-month interest rate is 5.60 percent per annum in the United States and 5.40 percent per year in France. Assume that you can borrow up to $1,000,000 or 800,000. Assume that you want to realize profit in terms of euros. Determine the arbitrage profit in euros. write the function sumOfDigits(in). This function takes a non-negative integer paramenter n and returns the sum of its digits. No credit will be given for a solution using a loop Examples: sumOfDitigts(1234) --> 10 sumOfDitigts(4123) --> 10 sumOfDitigts(999) --> 27 DEI will incur $8,900,000 in annual fixed costs. The plan is to manufacture and sell 26,000 machines per year at $8,600 each; the variable cost of production are $7,600 per machine. What is the annual operating cash flow for DEI? The plant and new equipment will cost $45 million to build. DEIs tax rate is 30 percent.The manufacturing plant has an eight-year tax life, and DEI uses straight-line depreciation. At the end of the project (i.e., the end of Year 5), the plant can be scrapped for $1.7 million. 8. Texas State has a policy of minimum cash balance of $28,000. They started the year with $30,000 in Cash.Texas State expects $400,000 in tuition to be collected in the first quarter. The beginning of the year always hasheavy spending. In the first quarter Texas State needs to pay professors $100,000; grounds maintenance teams$40,000; and make the final construction payment of $300,000 for a new building. Texas State also haddepreciation expense of $100,000. How much do they need to borrow at the end of March?a. $ 138,000b. $ 38,000c. $ 28,000c. $ 09. McCoy sells Texas State T-shirts. In January they sold 1000 shirts for $30 each. In February they sold 500 shirtsfor $30 each. Sales are all on account. McCoy typically collect 20% of account sales in the same month as sold,and 80% in the following month. What is McCoys accounts receivable balance on February 28?a. $36,000b. $12,000c. $15,000d. $39,000 Which statement best describes the composition of most foods? They contain mixtures of the three energy nutrients, although only one or two may predominate. They contain only two of the three energy nutrients, and those two are contained in equal amounts. They contain equal amounts of the three energy nutrients, Most contain only one of the three energy nutrients, although a few contain all of them