2Fe(s) + 3Cl₂(g) →2FeCl₃(s)
mol Fe = 15.52 : 56 g/mol = 0.277
mol FeCl₃ = mol Fe = 0.277 (same coefficient)
mass FeCl₃ = 0.277 x 162.2 g/mol = 44.93 g
% yield = 34.5 : 44.93 = 76.79 %
How many grams of Fe(NO3)3 are present in a 20.0 mL sample of a 0.500 M solution?
The concentration terms are molality, normality and mole fraction. Molarity can be used to find out the ionic strength of any solution. Therefore, 0.80g of Fe(NO[tex]_3[/tex])[tex]_3[/tex] are present in a 20.0 mL sample of a 0.500 M solution.
What is molarity?Molarity can be calculated by dividing number of moles of solute by volume of solution in litre. Molarity is affected by temperature. Its unit is mole/liter. It measure the concentration of any solute in a solution.
Mathematically,
Molarity= number of moles of solute/volume of solution in litre (1)
Where,
moles= given weight /by molecular weight
= w/241.8
Substituting values in equation 1
0.500= (w/241.8)/(20.0 /1000)
w=0.80g
Therefore, 0.80g of Fe(NO[tex]_3[/tex])[tex]_3[/tex] are present in a 20.0 mL sample of a 0.500 M solution.
Learn more about Molarity, here:
https://brainly.com/question/16727614
#SPJ2
Assume that you measured exactly 2.0 mL of the sodium chloride solution into a small test tube. How many moles of
sodium chloride are in the tube?
If data from a clinical trial contains personal information about a study participant, which process should be used to separate identifying information from health information?
A. De-identification
B. Informed consent
C. ALCOA
D. Good documentation practices
If data from a clinical trial contains personal information about a study participant, De-identification process should be used to separate identifying information from health information. Thus, Option (A) is correct
What is De-identification process ?De-identification is a process of detecting identifiers (e.g., personal names and social security numbers) that directly or indirectly point to a person (or entity) and deleting those identifiers from the data.
De-identification and anonymization are strategies that are used to remove patient identifiers in electronic health record (EHR) data.
Hence, De-identification process should be used to separate identifying information from health information. Thus, Option (A) is correct.
learn More about health record here ;
https://brainly.com/question/11156017
#SPJ1
Which is the most likely to be reduced?
OA. Cu²+
OB. Zn²+
OC. Fe³+
OD. Fe2+
Answer:
OC. Fe³+
Explanation:
Greater reduction potential (bigger positive E value) means that things wants to get electrons. For this, you have to look at the chart that I have attached. Since, Fe3+ has highest E value out of other options, it will likely be reduced.
The species which is most likely to get reduced is Fe³⁺.
What is Reduction?Reduction is the process of the addition of electrons and loss of oxygen atoms. It is part of redox reactions.
Redox reactions are the type of reactions in which oxidation and reduction simultaneously take place. Oxidation is the addition of oxygen atoms. Reduction is the removal of oxygen atoms.
Redox reaction can be represented as:
PbO (s) + H₂ (g) → Pb(s) + H₂O (l)
In the above reaction, PbO is getting reduced and H₂ is getting oxidized.
Fe³⁺ is most likely to get reduced because the more positive the value of reduction potential, the more will be its tendency to get reduced.
In the given four species, the value of the reduction potential of Fe³⁺ is the highest.
Values of the reduction potential of four species are:
Cu²⁺ = 0.34Zn²⁺ = - 0.76Fe³⁺ = 0.77Fe²⁺ = -0.45Learn more about, redox reactions:
https://brainly.com/question/28300253
#SPJ7
10. Two primary sites for the
polio virus replication?
Answer:
the cytoplasm
protein 3b more commonly called vpg
a specialist that study substance obtained by attained mining is called a what
Answer:
Explanation:
Mining:
Mining is when certain substances are removed from the Earth, usually in large quantities. Mining can occur below the surface of the Earth via tunnels and caves. It can also occur at surface level through methods such as strip mining, which removes huge amounts of soil in the process
A team of scientists altered the DNA of E. coli bacteria. The bacteria thus developed had the ability to generate insulin exactly identical to the human insulin molecule. What could be the likely impact of this biotechnology on the individual and the society?
The medical costs for insulin-dependent patients would rise.
Large-scale insulin could be produced in relatively lesser time.
The price of insulin available from sources other than bacteria may fall.
The patients who take insulin may become infected with E. coli bacteria.
Answer:
Large-scale insulin could be produced in relatively lesser time.
Explanation:
We already sort of do this where we infect the bacteria with a plasmid containing our insulin gene and it causes them to produce insulin. Since the question is saying that we edited their DNA directly, now these bacteria don't need to be infected with plasmid b/c now they can just pass these genes onto their offspring.
This will allow us to make TONS of insulin cuz bacteria are crazy good at making stuff and growing.
The properties of an element depend on the electron structure within its atoms. The electrons are arranged in different
orbitals, at different energy levels and sublevels. Match each sublevel to the maximum number of electrons it can
accommodate?
S=2, p=6, d=10, and f=14 the maximum number of electrons it can
accommodate.
What are orbitals?The probability of finding an electron around the nucleus.
The principal number (n), is the number of the shell, it goes from 1 to 7 and is represented by the letter K, L, M, N, O, P, Q. The maximum number of electrons in the shells are, K = 2, L = 8, M = 18, N = 32, O = 32, P = 18, Q =8.
The secondary number (l) is the subshells, and it goes from 0 to 4 and is represented, in order, for the letter, s, p, d, f. The maximum number of electrons permitted in each subshell is s = 2, p = 6, d = 10, f = 14.
The magnetic number (ml), is represented by orbitals, and it goes from -l to +l, passing by 0. The maximum number of electrons is 2 for each one.
The spin number (ms) refers to the rotation of the electron, and it can be +1/2 or -1/2.
Hence, S=2, p=6, d=10, and f=14 the maximum number of electrons it can
accommodate.
Learn more about the orbitals here:
https://brainly.com/question/18914648
#SPJ1
Choose the correct option.
1. A chain of small chemical units combined to form a large single unit is called ______
a) Polymer
b) Poly
c) Polythene
d) None of the above
2. Polythene and PVC are examples of
a) Bio degradable substance
b) Thermosetting plastics
c) Thermoplastics
d) Rayon
3. Plastics which when moulded once, cannot be softened by heating. Such plastics are called __ a) Polythene
b) Thermoplastics
c) Polyster
d) Thermosetting plastics
4. Polycot is made by mixing two types of fibres namely
a) Silk + Cotton
b) Polythene + cotton
c) Silk + Polyester
d) Polyester + Cotton
5. The 4 R Principle is
a) Reduce, Reuse, Recycle, Recover
b) Remember, reduce, Recycle, Rejoice
c) Repeat, Rejoice, recycle, reduce
d) None of the above
6. _____________ is an example of natural polymer
a) Rayon
b) Cellulose
c) Nylon
d) All of the above
7. Which of the following is Non-biodegradable ?
a) Woolen clothes
b) Plastic bag,
c) Cotton cloth
d) Wood
8. Bakelite and Melamine are examples of
a) Thermosetting plastics
b) Silk
c) Nylon
d) Rayon
9. Fire proof plastic uniform worn by fire fighters has a coating of _____ to make it fire resistant. a) Nylon
b) Rayon
c) Melamine plastic
d) silk
The coating on modern non- stick cookware and electric iron is of
a) Terrycot
b) Rayon
c) Polyester
d) Teflon
How many molecules in HNO3?
Use Table B in your Student Guide to answer the questions about ion concentrations.
A solution with a pH = 13 has approximately how many moles of OH ions per liter?
How many moles of H* would this same solution have per liter?
(Use the decimal form of your answer.)
A different solution with an H+ concentration of 1.0 x 10-4 would have a pH =
Question 1
[tex]\text{pH}=-\log(\text{H}^{+})\\\\13=-\log(\text{H}^{+})\\ \\ \text{[H}^{+}]}=1 \times \boxed{10^{-13} \text{ moles per liter}} \\ \\ \text{[H}^{+}] \times \text{[OH}^{-}] =1 \times 10^{-14} \text{ M}\\\\\text{[OH}^{-}]=\boxed{1 \times 10^{-1} \text{ moles per liter}}[/tex]
Question 2
[tex]\text{pH}=-\log(\text{H}^{+})\\\\\text{pH}=-\log(1.0 \times 10^{-4})=\boxed{4}[/tex]
just need help with one question pls
Answer:
A large absorption at 2950 cm⁻¹ indicates that there is likely an sp³C-H functional group somewhere in the molecule. The "sp³" designation means that this is a single bond because these atoms have 4 orbitals available (s + p + p + p) for hybridizing, meaning only single bonds are possible.
What is the IUPAC name of the following compounds i. CO₂ ii. NO₂ iii. HNO3 iv. H₂SO4 v. K-Cr₂O vi. [Fe(CN)
Explanation:
I) carbon dioxide
ii) nitrogen dioxide
iii) nitric acid
iv) sulphric acid
v) Potassium dichromate
vi) hexacyanoferrate (III) ion( not sure)
Help me pleaseeeeeeeee
Answer:
Make life easy for your customers and they are more likely to come back and buy again.
Explanation:
For example, you have to hire the right talent. You don't want somebody on the job that doesn't know how to do anything.
How many moles of zinc, Zn, are in 1.31×1024 Zn atoms?
Answer:
=7.89013× 10^47 moles of zinc
Explanation:
1 atom contains 6.023×10^23 moles.
1.31×10^24 atoms of zinc contain6.023×10^24×1.31×10^.24
hello can you please help me
define x-ray with examples and it's uses?
Answer:
an x-ray a photographic or digital image of the internal composition of something, especially a part of the body, produced by X-rays being passed through it and being absorbed to different degrees by different materials.
examples
Abdominal x-ray.
Barium x-ray.
Bone x-ray.
Chest x-ray.
Dental x-ray.
Extremity x-ray.
Hand x-ray.
Joint x-ray.
Explanation:
its uses
An X-ray is a common imaging test that's been used for decades. It can help your doctor view the inside of your body without having to make an incision. This can help them diagnose, monitor, and treat many medical conditions.
PLEASE HELP ASASP!!!!!!!
Answer:
B
Explanation:
I took the test
TUTOR Determining Molecular Weight
What is the molecular weight of Cr3(ASO4)2? amu
The molecular weight of Cr3(AsO4)2 is 433.827.
Is molecular weight the same As molar mass?Furthermore, the primary distinction between each is that molar mass gives the mass of a mole of a selected substance. While molecular weight is the mass of a molecule of a particular substance. At an equal time as the definition and devices are splendid for molar mass and molecular weight, the value is the same.
The sum of the atomic hundreds of all atoms in a molecule is based totally on a scale wherein the atomic loads of hydrogen, carbon, nitrogen, and oxygen are 1, 12, 14, and 16, respectively.
Learn more about molecular weight here https://brainly.com/question/26388921
#SPJ10
examples of molecular compound
Answer:
Molecular compounds are inorganic compounds that take the form of discrete molecules. Examples include such familiar substances as water (H2O) and carbon dioxide (CO2). These compounds are very different from ionic compounds like sodium chloride (NaCl).
PLEASEEEE HELP MEEEEE
Answer:
3.82 x 10²¹ molecules As₂O₃
Explanation:
To find the amount of molecules arsenic (III) oxide (As₂O₃), you need to (1) convert kg to lbs, then (2) convert g As₂O₃ to moles As₂O₃ (via molar mass), and then (3) convert moles to molecules (via Avogadro's number).
1 kilogram = 2.2 lb
Molar Mass (As₂O₃): 2(74.992 g/mol) + 3(15.998 g/mol)
Molar Mass (As₂O₃): 197.978 g/mol
Avogadro's Number:
6.022 x 10²³ molecules = 1 mole
0.0146 g As₂O₃ 1 kg 189 lb
------------------------ x --------------- x ------------------ x ................
1 kg 2.2 lb
1 mole 6.022 x 10²³ molecules
x ------------------ x --------------------------------------- = 3.82 x 10²¹ molecules As₂O₃
197.978 g 1 mole
Which of the following industries is leaching used in?
To separate a metal from its ore using acid and preserving desirable products such as gold.
To separate a mixture of ethanol and water
To separate a slurry containing chalk and water
None of the above.
Answer:
To separate a metal from its ore using acid and preserving desirable products such as gold.
Explanation:
please make brainiest
PLEASE HELP CHEMISTRY!!!! Will give brainiest
Show work pls.
2 moles of ZnO are produced if 1 mole of Zn and 2 moles of [tex]O_2[/tex] is required.
What are moles?A mole is defined as 6.02214076 × [tex]10^{23}[/tex] of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
Balanced equation:
[tex]2 Zn + O_2[/tex] → [tex]2 ZnO[/tex]
For 2 moles of Zinc, we need 1 mol of Oxygen to produce 2 moles of Zinc oxide
For 1 mole Zn, we need 2 mol [tex]O_2[/tex] to produce 2 moles ZnO only.
Hence, 2 moles ZnO is produced.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ1
Number of molecules in .99 mol C6H5NO2
Answer:
5.96 * 10^23 molecules
Explanation:
Don't start counting up the number of CsHsNs and Os there are Counting up the atom ions will get a wrong answer. The question is asking for the number of molecules. That means you do not break down each molecule to find the number of molecules. You modify 1 mol to find out how many molecules are in 0.99 mols. Do that using a proportion.
1 mol contains 6.01 * 10^23 molecules
0.99 mol contains x
1/0.99 = 6.02 * 10^23 / x molecules
x = 0.99 * 6.02 * 10^23
x = 5.96 * 10^23
If the earth were the size of an apple, which piece would best represent the amount of mass of the
atmosphere?
O the skin
O the meat
O the stem
O Oops..... I am sorry. I just ate the Pacific Ocean by mistake.
O a seed
Which of the following alkali metal is expected to melt if the room temperature
rise to 30oc (a) Na (b) K (c) Rb (d) Cs
How would you draw the ionic compound Beryllium Arsenide lewis structure?
Answer:
[Na]^+ [Cl]^-
Explanation:
Lets say its sodium, its number of electrons is 11, but when its stable (an ion), it is 10. and chloride, number of electrons is 17, but when its stable (an ion) it is 18. So the lewis structure for that is, remember with the straight brackets (not sure what it's called, but you know what I mean I guess) its this one: [ ]
Sodium will be + because it has more protons (11-10 = +1), and chloride will be - because it gained an electron, so has more electrons than protons (17-18 = -1)
So the lewis structure would be:
[Na]^+ for sodium
and
[Cl]^- for chlorine
Sodium chloride:
[Na]^+ [Cl]^-
Also just to add, only 1 of each atom (Na and Cl) was needed for the bonding, but if let's say example; 2 Cl was needed to bond with sodium, there would be 2 Cl (same) and 1 Na.
12. Consider the system PCl3(g) + Cl2(g) PCl5(g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C. When some Cl2(g) is added at constant volume and temperature, the ratio of the partial pressure of PCl5 to the partial pressure of PCl3 wil
For a system PCl3(g) + Cl2(g) PCl5(g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C, the ratio of the partial pressure of PCl5 to the partial pressure of PCl3 is will increase
What is the ratio of the partial pressure of PCl5 to the partial pressure of PCl3?Generally, the equation for chemiecal reaction is mathematically given as
PC3 (g) + C₁₁₂ (g) = PC15 (g) 3
Assuming the addition of some Cl2 gas. The reaction will shift to the right at the invariant volume temperature, maintaining equilibrium. This results in a rise in P9Cl5(g) and a fall in PpCl3(g).
PpCl (g) /PpCl (g) will increase
Read more about Chemical Reaction
https://brainly.com/question/11231920
#SPJ1
The ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃ is will increase for a system PCl₃ (g) + Cl₂ (g) --> PCl₅ (g) at equilibrium at 25°C, for which H° = –92.5kJ at 25°C when some Cl₂ (g) is added at constant volume and temperature.
What is the ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃?
Generally, the equation for chemical reaction is mathematically given as ;
PCl₃ (g) + Cl₂ (g) --> PCl₅ (g)
Assuming the addition of some Cl₂ gas,
The reaction will shift to the right at the constant volume and temperature, maintaining equilibrium.
This results in a rise in PCl₅ (g) and a fall in PCl₃(g).
Hence, the ratio of the partial pressure of PCl₅ to the partial pressure of PCl₃ is will increases
Read more about Chemical Reaction here;
brainly.com/question/11231920
#SPJ1
Fill in the coefficients that will balance the following reaction:
(Note: Use 1 as coefficient where appropriate)
Fe(HCO3)3 + CaO → Fe2O3 + Ca(HCO3)2
Answer:
2 Fe(HCO₃)₃ + 3 CaO ---> 1 Fe₂O₃ + 3 Ca(HCO₃)₂
Explanation:
The unbalanced equation:
Fe(HCO₃)₃ + CaO ---> Fe₂O₃ + Ca(HCO₃)₂
Reactants: 1 iron, 3 hydrogen, 3 carbon, 10 oxygen, 1 calcium
Products: 2 iron, 2 hydrogen, 2 carbon, 9 oxygen, 1 calcium
As you can see, the reaction is clearly unbalanced because the number of each element on both sides is different. The best way to go about balancing an equation is by trying to first balance an element located in only one molecule on either side. For example, I started trying to balance iron. After balancing iron, I looked to balance other elements that would have been affected by the new coefficient (i.e., hydrogen, carbon).
The balanced equation:
2 Fe(HCO₃)₃ + 3 CaO ---> 1 Fe₂O₃ + 3 Ca(HCO₃)₂
Reactants: 2 iron, 6 hydrogen, 6 carbon, 21 oxygen, 3 calcium
Products: 2 iron, 6 hydrogen, 6 carbon, 21 oxygen, 3 calcium
Now, with these coefficients, the quantity of each element on both sides is the same.
When 50.0 g of calcium carbonate are reacted with sufficient hydrochloric acid, how many grams of calcium chloride will be produced
Answer:
55.5g of calcium chloride is produced in the reaction.
Explanation:
To calculate the amount of calcium chloride.
The reaction of calcium carbonate with hydrochloride acid gives calcium chloride
CaCO₃ + 2HCl → CaCl₂ + CO₂ + H₂O
Mass of calcium carbonate (CaCO₃)= 50.0g
Molecular mass of CaCO₃ = Ca + C + O₃
= 40+ 12 + 3(16) = 100g
No of moles of calcium carbonate CaCO₃ = given mass / molecular mass
= 50g/ 100
= 0.5 moles
Molecular mass of calcium chloride = 40+ 2(35.5)=(40+71.0)= 111g/mol
1 mole of calcium carbonate gives = 1 mole of calcium chloride
0.5 moles of calcium carbonate gives= 0.5 × 111g/mole
= 55.5g
To learn more about moles, grams and molecular mass, refer to-
https://brainly.com/question/11893320
#SPJ10
What is the percent yield for the reaction below when
705.0 g SO2 and 80.0 g 0₂ produce 586.0 g SO3?
2SO2(g) + O2(g) → 2SO3(g)
The percent yield would be 68.3%
Percent yieldThis is given as:
Percent yield = yield/theoretical yield x 100%
From the equation:
[tex]2SO_2(g) + O_2(g) -- > 2SO_3(g)[/tex]
The mole ratio of the reactants is 2;1
Mole of 705 g SO2 = 705/64 = 11.02 moles
Mole of 80 g O2 = 80/32 = 2.5 moles
O2 is limiting.
Mole ratio of O2 and SO3 = 1:2
Mole equivalent of SO3 = 2.5 x 2 = 5.0 moles
Mass of 5 moles SO3 = 5 x 80 = 400 grams
Percent yield = 400/586 = 68.3%
More on percent yield can be found here: https://brainly.com/question/17042787
#SPJ1
