PLEASE HELPPP: In the design of a new baby diaper, the manufacturer uses two polymers. The structure of these molecules is given below. Which polymer (I or II) is best suited to the outside of the diaper and which to the inside? Why?
What monomers were used to create these polymers? What type of polymerization took place?

An enzyme (biological catalyst) is required to speed up the reaction by lowering the activation energy, thus allowing the reaction to occur at a faster rate and meeting the energy demands of the cell.

The hydrolysis of adenosine triphosphate (ATP) is a crucial process in cellular biology, but the reaction proceeds at a slow rate. This is because the reaction involves breaking the high-energy phosphate bond in ATP, which requires a large amount of energy.

Enzymes are required to speed up the reaction by lowering the activation energy required for the reaction to occur. Enzymes provide an alternative reaction pathway that requires less energy, allowing the hydrolysis of ATP to occur at a faster rate. Therefore, an enzyme (biological catalyst) is necessary for the hydrolysis of ATP to occur efficiently in cells.

More on hydrolysis: https://brainly.com/question/27178352

#SPJ11

The correct answer is (c) both acetylide and methanol. A Lewis base is a species that donates a pair of electrons to form a chemical bond.

(a) Acetylide ion (C2H^-) has two lone pairs of electrons on the carbon atom and is a strong base, as it readily donates these electrons to form a chemical bond. Therefore, acetylide ion is a Lewis base.

(b) Methanol (CH3OH) has a lone pair of electrons on the oxygen atom, which can be donated to form a chemical bond. Therefore, methanol is also a Lewis base.

Therefore, the correct answer is (c) both acetylide and methanol.

Learn more about methanol. here:

https://brainly.com/question/18725375

#SPJ11

The most acidic hydrogen in this compound is the hydrogen attached to the carboxylic acid group (COOH). This is because the carboxylic acid group is an electron-withdrawing group, making the hydrogen attached to it more acidic.

The next most acidic hydrogen would be the one attached to the OH group (OH), followed by the hydrogen attached to the fluorine group (CF3), and then the remaining hydrogens attached to carbon atoms (H, H, H, H3C, CH3) in no particular order since they are all similar in acidity. Overall, the ranking from most acidic to least acidic would be COOH > OH > CF3 > H, H, H, H3C, CH3.

In order to rank the bold-faced hydrogens in the given compounds from most acidic to least acidic, we need to consider the acidity of the functional groups they are part of. The compounds are COOH (carboxylic acid), CF3 (trifluoromethyl), H (neutral hydrogen), H3C (methyl), CH3 (methyl), and OH (hydroxyl).

Your answer: The ranking of the bold-faced hydrogens from most acidic to least acidic is as follows: COOH > OH > CF3 > H > H3C > CH3. This is due to the relative acidity of the functional groups they are part of, with carboxylic acids being the most acidic and methyl groups being the least acidic.

To know about acidic :

https://brainly.com/question/29796621

#SPJ11

This character possesses unique traits and abilities that align with your personality and characteristics, making you a perfect match for that specific Crystal Gem.

Each Crystal Gem possesses distinct qualities and powers. By answering a series of questions about your preferences, traits, and behaviors, the quiz generates a result that matches you with a particular Crystal Gem. For example, if you are identified as Garnet, it means you share Garnet's strong and stoic nature, as well as her ability to see into the future. If you are identified as Amethyst, you may share her playful and spontaneous personality, along with her shapeshifting abilities. If you are identified as Pearl, you may exhibit Pearl's intellect, grace, and proficiency with swords. The result of the quiz is determined by an algorithm that assigns certain character traits and responses to each Crystal Gem. Based on your answers, the algorithm calculates the best match for you. It is a fun and entertaining way to connect with the beloved characters of Steven Universe and explore which Crystal Gem resonates with your personality.

Learn more about Garnet here: brainly.com/question/28883904

#SPJ11

The electron configuration of an atom provides information about the arrangement of electrons in its various energy levels or orbitals. Based on this information, it is possible to deduce the identity of an element.

The number of electrons in an atom's outermost energy level, known as its valence electrons, determines many of its chemical properties. The electron configuration reveals the number of valence electrons and their distribution in orbitals. For example, if an element has a completely filled valence shell, it is likely to be inert and have little reactivity. Alternatively, if an element has only one or a few valence electrons, it is more likely to form bonds with other unit to achieve a stable electron configuration. Additionally, the electron configuration can help determine the element's position in the periodic table and its chemical properties, such as its tendency to form ions or react with other elements. Overall, the electron configuration provides important clues about the identity and chemical behavior of a molecule.

To learn more about unit click here: brainly.com/question/23843246

#SPJ11

The pH of the 0.15 M acetic acid/0.39 M sodium acetate solution is approximately 5.15.

To determine the pH of a 0.15 M acetic acid/0.39 M sodium acetate solution with a Ka of 1.8 x 10^-5, you need to use the Henderson-Hasselbalch equation, which is pH = pKa + log([base]/[acid]).

First, find the pKa of acetic acid using the Ka value given:

pKa = -log(Ka) = -log(1.8 x 10^-5) = 4.74

Next, determine the ratio of the concentration of the acetate ion ([base]) to acetic acid ([acid]):

[base]/[acid] = 0.39/0.15 = 2.6

Finally, plug in the pKa and ratio values into the Henderson-Hasselbalch equation:

pH = 4.74 + log(2.6) = 4.74 + 0.41 = 5.15

Therefore, the pH of the 0.15 M acetic acid/0.39 M sodium acetate solution is approximately 5.15.

Visit here to learn more about acetic acid brainly.com/question/15202177

#SPJ11

The answer is (C) 0.0405 moles, which is the closest choice to our calculated value.To solve this problem, we need to use the ideal gas law and Dalton's law of partial pressures.

The balanced chemical equation for the reaction is:

2 KClO3(s) -> 2 KCl(s) + 3 O2(g)

According to the equation, for every 2 moles of KClO3 consumed, 3 moles of O2 are produced.

We are given that the total pressure in the vessel is 1.00 atm, and the vapor pressure of water at 27°C is 26.0 torr. Therefore, the partial pressure of oxygen gas is:

P(O2) = P(total) - P(H2O) = (1.00 atm - 26.0 torr / 760 torr/atm) = 0.967 atm

Next, we can use the ideal gas law to calculate the number of moles of oxygen gas:

PV = nRT

n = PV/RT

n(O2) = (0.967 atm)(1.55 L)/(0.08206 L·atm/mol·K)(300 K) = 0.0596 mol

Finally, since 3 moles of O2 are produced for every 2 moles of KClO3 consumed, we can calculate the number of moles of KClO3 as:

n(KClO3) = 2/3 × n(O2) = 2/3 × 0.0596 mol = 0.0397 mol

Therefore, the answer is (C) 0.0405 moles, which is the closest choice to our calculated value.

Learn more about pressures here:

https://brainly.com/question/15170210

#SPJ11

Mendeleev's work on developing the periodic table of elements was a significant achievement in the field of chemistry.

While he made great strides in organizing the known elements by their atomic properties and characteristics, he also realized that the table could never be perfect. This was due to the fact that not all of the elements had yet been discovered during Mendeleev's time. He understood that there were gaps in the table where new elements would eventually be discovered, and that the properties of these elements could not yet be predicted.
Despite this limitation, Mendeleev's work on the periodic table laid the foundation for future discoveries and advancements in chemistry. His organizational system enabled scientists to better understand the properties and behavior of various elements, leading to the development of new technologies and innovations. In the end, Mendeleev's realization that the table could never be perfect only served to further inspire future scientists to continue exploring the properties and characteristics of the elements.
To know more about elements  visit:

https://brainly.com/question/30858299

#SPJ11

The theoretical yield of H2O in this reaction is 160.75 g. Theoretical yield refers to the maximum amount of product that can be obtained in a chemical reaction based on the amount of limiting reactant. In this case, hydrogen gas is the limiting reactant as it is the one that gets completely consumed in the reaction.

To calculate the theoretical yield of H2O, we need to first calculate the amount of H2 used in the reaction. From the given information, we know that 18 g of H2 was used. The balanced chemical equation for the reaction is:

2H2 + O2 → 2H2O

This means that for every 2 moles of H2 used, 2 moles of H2O is produced. Therefore, we can use stoichiometry to calculate the moles of H2O produced:

Moles of H2 = 18 g / 2.016 g/mol = 8.93 mol
Moles of H2O = Moles of H2 x (2 moles of H2O / 2 moles of H2) = 8.93 mol

Finally, we can calculate the theoretical yield of H2O in grams:

Theoretical yield of H2O = Moles of H2O x Molar mass of H2O
= 8.93 mol x 18.015 g/mol
= 160.75 g

Therefore, the theoretical yield of H2O in this reaction is 160.75 g.

To know about yield  :

https://brainly.com/question/30081101

#SPJ11

The Thomson model, also known as the plum pudding model, of the atom accounted for electrons only. Correct option is C)

The Thomson model, also known as the plum pudding model, proposed that the atom was made up of a positively charged substance with negatively charged electrons scattered throughout. This model was developed in 1897 by J.J. Thomson based on his discovery of the electron.

Therefore, the only subatomic particle accounted for in this model was the electron. It was not until later models, such as the Rutherford model and the Bohr model, that protons and neutrons were discovered and included in the understanding of the atom. However, it is important to note that the Thomson model still provided an important foundation for the understanding of atomic structure and paved the way for future discoveries and models.

Learn more about subatomic particle here:

https://brainly.com/question/1527888

#SPJ11

The [H+] of the solution is 3.76 x 10^(-4) M and the [OH-] is 2.66 x 10^(-11) M.

The pH of a solution is defined as the negative logarithm of the hydrogen ion concentration, or pH = -log[H+]. Using this equation, we can rearrange it to solve for [H+]:

[H+] = 10^(-pH)

Plugging in the given pH value, we get:

[H+] = 10^(-3.494) = 3.76 x 10^(-4) M

To find the [OH-] of the solution, we can use the fact that the product of the hydrogen ion concentration and the hydroxide ion concentration is always equal to 1.0 x 10^(-14) at 25°C, or:

[H+][OH-] = 1.0 x 10^(-14)

Rearranging this equation to solve for [OH-], we get:

[OH-] = 1.0 x 10^(-14) / [H+]

Plugging in the calculated value of [H+], we get:

[OH-] = 1.0 x 10^(-14) / (3.76 x 10^(-4)) = 2.66 x 10^(-11) M

Therefore, the [H+] of the solution is 3.76 x 10^(-4) M and the [OH-] is 2.66 x 10^(-11) M.

For more details regarding pH, visit:

https://brainly.com/question/15289714

#SPJ1

The explanation for why elements in the IA group of the periodic table have a greater atomic size than elements in the VIIA group can be attributed to a few factors. Firstly, the IA group elements have one valence electron while the VIIA group elements have seven valence electrons. This means that the IA group elements have a weaker attraction between their nucleus and their valence electron, resulting in a larger atomic radius.

Secondly, the IA group elements have a lower effective nuclear charge (the net positive charge experienced by an electron in an atom) than the VIIA group elements. This is because the IA group elements have a smaller number of protons in their nucleus than the VIIA group elements, which means that their valence electron is more shielded from the positive charge of the nucleus. As a result, the electron is held less tightly, resulting in a larger atomic size.

Overall, the combination of a weaker attraction between the nucleus and valence electron, as well as a lower effective nuclear charge, explains why elements in the IA group of the periodic table have a greater atomic size than elements in the VIIA group.

To know more about periodic table visit :-

https://brainly.com/question/15987580

#SPJ11

The minimum energy deposited by the particle of ionizing radiation is 96,600 eV.

To find the minimum energy deposited by the particle of ionizing radiation, we can use the fact that 21.0 eV is required to create each ion pair and the particle created 4600 ion pairs. Thus, the total energy deposited would be:

4600 ion pairs x 21.0 eV per ion pair = 96,600 eV

Therefore, the minimum energy deposited by the particle of ionizing radiation is 96,600 eV.

To determine the minimum energy deposited by the particle of ionizing radiation, you can use the formula:

Minimum energy = Number of ion pairs × Energy per ion pair

In this case, the particle creates 4,600 ion pairs, and it requires 21.0 eV of energy to create each ion pair. So, the minimum energy deposited can be calculated as:

Minimum energy = 4,600 ion pairs × 21.0 eV/ion pair = 96,600 eV

Thus, the particle of ionizing radiation deposited a minimum of 96,600 electron volts (eV) of energy in the gas inside the Geiger tube.

Learn more about energy here :

https://brainly.com/question/1932868

#SPJ11

Answer: seawater at pH 8 has the greatest concentration of hydroxyl ions[OH-].Thus, option (c) is the correct answer.

Explanation:

When the pH value increases from 7 to 14,it represents increase in the OH- ion concentration.pH scale determines the acidity or basicity of the solution.The value below 7 represents that solution is acidic and above 7 represents that solutions is basic.

The pH of pure water at room temperature is 7.It means it is neither acidic nor basic,it is neutral.The pH value of Battery Acid is 0 which means it is highly acidic.The pH value of Liquid drain cleaner is 14 which means it is highly basic.

To know more about pH scale

brainly.in/question/55709004

Answer:

1.0125 moles

Explanation:

Now moles can be calculated using this formula, so moles are equal to molarity, that is 1.35 molar multiplied by a volume that is 750.0 lither divided by 1000 point now we use liter here, because ml value is converted into literis, using this 1000 point. So on calculating. We get 1.0125 moles of m g b r 2.

If a compound is impure, containing traces of starting material or byproduct, the melting point is expected to be lower than the melting point of a pure compound.

This is because impurities in a compound disrupt the crystal lattice structure, which causes the melting point to decrease. In a pure compound, the molecules are arranged in a uniform and regular pattern, allowing for efficient packing and strong intermolecular forces. Impurities introduce disorder and randomness into the crystal lattice, creating voids or vacancies that weaken the intermolecular bonds. As a result, less energy is required to overcome the intermolecular forces and the compound melts at a lower temperature. Therefore, the melting point of an impure compound can be used as an indication of its purity. The more impurities a compound has, the lower its melting point will be.

To know more about compound visit:

https://brainly.com/question/14117795

#SPJ11

The response factor for x relative to s is 17.01. This means that for every unit increase in the peak area of x, we can expect to see 17.01 times more of x compared to the same unit increase in the peak area of s.

To determine the response factor for x relative to s, we can use the following equation:
Response factor = (amount of x / peak area of x) / (amount of s / peak area of s)
First, we need to convert the amounts given in millimoles (mm) to moles (M):
4.27 mm = 0.00427 moles of x
1.07 mm = 0.00107 moles of s
Next, we can plug in the values given:
Response factor = (0.00427 / 3777) / (0.00107 / 10467)
Simplifying the equation:
Response factor = (0.00427 * 10467) / (0.00107 * 3777)
Response factor = 17.01
Therefore, the response factor for x relative to s is 17.01. This means that for every unit increase in the peak area of x, we can expect to see 17.01 times more of x compared to the same unit increase in the peak area of s.

To know more about Chromatographic separation visit:

https://brainly.com/question/31086078

#SPJ11

Answer:

(d) Carbon

Explanation:

Only 7 elements exists as a diatomic molecule. Hydrogen, Oxygen, Nitrogen, Fluorine, Chlorine, Bromine, and Iodine, which can be remembered as HONCLBRIF or HONFCLBRI

If the tlc plate is placed in a developing chamber that has 1.2 cm of developing solvent, the solvent will move up the plate by capillary action faster than it would if the solvent level was lower.

This is because the higher level of solvent means that there is more pressure pushing the solvent up the plate. As a result, the sample spots will become more concentrated as the solvent moves up the plate.
Additionally, the compounds to be analyzed will end up in the developing solvent, which is important because this is how they are separated and identified. The pencil marks that were made on the plate to indicate where the samples were spotted may also dissolve in the developing solvent, which can make it more difficult to accurately analyze the results.
In summary, the level of developing solvent in the chamber can impact the speed at which the solvent moves up the plate, as well as the concentration of the sample spots and the ability to accurately analyze the results. It's important to be mindful of these factors when conducting thin layer chromatography experiments.
To know more about tlc plate visit:

https://brainly.com/question/1308657

#SPJ11

The density of the ball bearings at 20.0°C is 7.48 g/cm^3. This is calculated by determining the volume of ethanol that was added to the flask to top it off, subtracting that from the total volume of the flask, and then dividing the mass of the ball bearings by the resulting volume.

To calculate the density of the ball bearings, we first need to determine the volume of the ethanol that was added to the flask to top it off.

We can do this by subtracting the mass of the empty flask from the mass of the flask filled with ethanol and ball bearings, and then dividing that difference by the density of ethanol at 20.0°C:

Volume of ethanol added = (total mass - empty flask mass) / ethanol density

Volume of ethanol added = (81.604 g - 61.742 g) / 0.78945 g/cm^3

Volume of ethanol added = 25.112 cm^3

Next, we can calculate the total volume of the flask by adding the volume of the ethanol that was added to the volume of the empty flask:

Total volume of flask = volume of empty flask + volume of ethanol added

Total volume of flask = 50.000 cm^3 + 25.112 cm^3

Total volume of flask = 75.112 cm^3

Finally, we can calculate the density of the ball bearings by dividing their mass by the volume of the flask that is not occupied by the ethanol:

Density of ball bearings = ball bearing mass / (total flask volume - ethanol volume)

Density of ball bearings = 21.784 g / (75.112 cm^3 - 25.112 cm^3)

Density of ball bearings = 7.48 g/cm^3

Therefore, the density of the ball bearings at 20.0°C is 7.48 g/cm^3.

Visit here to learn more about Mass:

brainly.com/question/19385703

#SPJ11

To calculate the density of the ball bearings, subtract the mass of the empty flask from the total mass to find the mass of the ball bearings. Use the volume of the ethanol added to the flask, which is equal to the volume of the ball bearings, to calculate the density of the ball bearings.

To calculate the density of the ball bearings, we need to find their volume and mass. From the given information, we know that the total mass of the flask and ball bearings is 81.604 g. Since the mass of the empty flask is 61.742 g, the mass of the ball bearings can be calculated by subtracting the mass of the empty flask from the total mass:

Mass of ball bearings = Total mass - Mass of empty flask = 81.604 g - 61.742 g = 19.862 g

Now, let's find the volume of the ball bearings. The volume of the ethanol added to the flask is equal to the volume of the ball bearings. The volume of the ethanol can be calculated using its density and the mass of the ethanol added:

Volume of ethanol = Mass of ethanol / Density of ethanol = (81.604 g - 61.742 g) / 0.78945 g/cm³ = 25.212 cm³

Since the density of a substance is defined as its mass divided by its volume, we can now calculate the density of the ball bearings:

Density of ball bearings = Mass of ball bearings / Volume of ball bearings = 19.862 g / 25.212 cm³ = 0.788 g/cm³

https://brainly.com/question/35605085

#SPJ12

The enzyme that forms a Schiff base as an intermediate in the mechanism of its reaction is (D) alcohol dehydrogenase.

Schiff base formation is a type of covalent catalysis in which an enzyme forms a covalent bond with a substrate intermediate during the reaction mechanism. Alcohol dehydrogenase is known to form a Schiff base intermediate with the substrate during the catalytic conversion of alcohol to aldehyde or ketone.

Phosphoglucose isomerase, glucose-6-phosphatase, and phosphoglucose mutase are all enzymes involved in carbohydrate metabolism, but they do not form Schiff base intermediates in their reaction mechanisms.

Learn more about reaction  here:

https://brainly.com/question/30464598

#SPJ11

The pH of the extracellular fluid (ECF) is maintained in homeostatic balance by the bicarbonate buffer system. This buffer system is a combination of carbonic acid (H2CO3) and bicarbonate ions (HCO3-), which act to maintain a stable pH level in the ECF.

The bicarbonate buffer system plays a critical role in regulating the pH of the ECF. This buffer system operates by the reversible reaction between carbonic acid and bicarbonate ions, which can either release or absorb hydrogen ions (H+), depending on the pH of the solution.

When the pH of the ECF drops and becomes more acidic, the bicarbonate ions act as a base by combining with excess hydrogen ions to form carbonic acid. Carbonic acid then dissociates into water and carbon dioxide, which can be expelled by the lungs.

On the other hand, when the pH of the ECF becomes more basic, carbonic acid acts as an acid by donating hydrogen ions to combine with the bicarbonate ions to form more carbonic acid.

This process helps to maintain a stable pH in the ECF by regulating the concentration of hydrogen ions. In addition to the bicarbonate buffer system, the body also uses other buffer systems, such as the protein and phosphate buffer systems, to help maintain the pH of bodily fluids within a narrow range.

Visit here to learn more about protein:

brainly.com/question/884935

#SPJ11

The reaction between copper (Cu) and hydrochloric acid (HCl) will produce copper chloride (CuCl[tex]^{2}[/tex]) and hydrogen gas (H[tex]^{2}[/tex]).

This is because copper is less reactive than hydrogen and therefore displaces hydrogen from HCl to form CuCl[tex]^{2}[/tex] and H[tex]^{2}[/tex]. The chemical equation for this reaction is:

Cu + 2HCl → CuCl[tex]^{2}[/tex] + H[tex]^{2}[/tex].

It is important to note that the CuCl[tex]^{2}[/tex] formed will dissolve in water to form [tex]Cu^{2+}[/tex] ions and [tex]Cl^{-}[/tex] ions, hence the complete ionic equation for the reaction is:

Cu + 2H+ + 2Cl- → [tex]Cu^{2+}[/tex] + 2[tex]Cl^{-}[/tex] + H[tex]^{2}[/tex].

Therefore, the correct answer to the question is CuCl[tex]^{2}[/tex] (aq) and H[tex]^{2}[/tex] (g).

More on copper: https://brainly.com/question/9370342

#SPJ11

A chloride ion, Cl-, has the same electron configuration as a neutral atom of the element argon (Ar). Both have a complete outer electron shell with 8 electrons.

This is because a chloride ion is formed by the gain of one electron by a neutral chlorine atom (Cl), which has 7 electrons in its outermost shell. When it gains one electron, it completes its outer shell and becomes a chloride ion with the same electron configuration as argon. This electron configuration is stable and unreactive, which is why both argon and chloride ions do not readily form chemical bonds with other atoms or molecules. Overall, the electron configuration of a chloride ion is a result of its chemical properties and interactions with other atoms.

To learn more about chloride click here: brainly.com/question/32108518

#SPJ11

This thin atmosphere means that Mercury has a very low ability to retain heat, causing a significant change in temperature between its day and night.

Mercury is the closest planet to the sun in our solar system and has a very thin atmosphere. This thin atmosphere means that Mercury has a very low ability to retain heat, causing a significant change in temperature between its day and night. During the day, the side of the planet facing the sun can reach temperatures of up to 800 degrees Fahrenheit (430 degrees Celsius) due to the intense heat and radiation from the sun. However, when Mercury rotates away from the sun and enters night, the temperatures on the planet can plummet to as low as minus 290 degrees Fahrenheit (-180 degrees Celsius). This large temperature swing is due to Mercury's slow rotation and lack of atmosphere, which allows heat to escape quickly into space. The slow rotation means that each side of Mercury is exposed to extreme temperatures for an extended period of time before rotating to the opposite side. Additionally, Mercury's lack of an atmosphere means there is no insulation to trap heat, making the planet's temperature more susceptible to changes in solar radiation.

For more such questions on atmosphere

https://brainly.com/question/10812146

#SPJ11

The molecular mass of the unknown gas is 16, which means it is also oxygen gas (O2).

To solve this problem, we can use Graham's law of diffusion, which states that the rate of diffusion of a gas is inversely proportional to the square root of its molecular mass.

First, we need to find the rate of diffusion of oxygen gas (O2) using the given information. Let's assume that the volume of oxygen gas that diffused through the porous plug is 1 liter. Then, we have:

Rate of diffusion of O2 = Volume of O2 diffused / Time taken = 1 L / 41 s

Next, we need to find the molecular mass of the unknown gas that diffuses through the same volume of the porous plug in 48 seconds under the same conditions. Let's call the molecular mass of this gas "M". Then, we can use Graham's law to set up the following equation:

Rate of diffusion of O2 / Rate of diffusion of unknown gas = sqrt(Molecular mass of unknown gas / Molecular mass of O2)

Substituting the values we have:

1/41 / Rate of diffusion of unknown gas = sqrt(M / 32)

Rate of diffusion of unknown gas = 1/48

Solving for M, we get:

M = (32 x (1/48)^2) / (1/41)^2

M = 16

Therefore, the molecular mass of the unknown gas is 16, which means it is also oxygen gas (O2).

Visit here to learn more about  Molecular mass :  https://brainly.com/question/3182776
#SPJ11

Li+ is the ion that will form a compound with a 1:1 cation to anion ratio with chlorate due to its +1 charge and ability to combine with one chlorate ion with a -1 charge to form a neutral compound.

The ion that will form a compound with a 1:1 cation to anion ratio with chlorate is option A, Li+.

Li+ is a monovalent cation with a +1 charge, while chlorate is a polyatomic anion with a -1 charge. To form a neutral compound, one Li+ ion and one chlorate ion must combine. The other options (O2–, Br–, Mg2+) either have a higher or lower charge than the required -1 charge to form a neutral compound with Li+.

Visit here to learn more about compound:

brainly.com/question/29547278

#SPJ11

Density is defined as the mass of an object divided by its volume. The density of the object is 1.49 g/mL.

Density is a physical property of matter that describes the amount of mass per unit of volume.

It is typically denoted by the symbol "ρ" (rho) and is measured in units of mass per unit volume, such as grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³)

Given:

Mass = 67 g

Volume = 45 mL

Use the formula:

Density = mass / volume

Substitute the given values in the equation:

Density = 67 g / 45 mL

Convert milliliters (mL) to grams (g),

since 1 mL of water has a mass of 1 gram:

Density = 67 g / 45 g

Density = 1.49 g/mL

To learn more about the density, follow the link:

https://brainly.com/question/29775886

#SPJ1