Question Little Corp. was experiencing cash flow problems and was unable to pay its $105,000 account payable to Big Corp. when it fell due on September 30, 2017. Big agreed to substitute a one-year note for the open account. Therefore, Big gave Little the following options: Option A: A one-year interest-bearing note for $105,000 due September 30, 2018. Interest at a rate of 8% would be payable at maturity OR Option B: A one-year non-interest bearing note for $113,400. The implied rate of interest is 8%. Required: Assume that Big had a December 31 year-end. Prepare the entries required on Big Corp.'s books on September 30, 2017, December 31, 2017, and September 30, 2018 under EACH of Option A and Option B. Show all calculations

The part of shareholders' equity that may not be used to pay cash dividends is either retained profits or share capital. These two options are not mutually exclusive. Therefore, the correct answer is option d: Both A and B.

Shareholders' equity represents the ownership interest of shareholders in a company. It consists of various components, including retained profits and share capital.

Retained profits, also known as retained earnings, are the accumulated profits of the company that have not been distributed as dividends to shareholders. These profits are typically reinvested in the business for future growth and expansion.

On the other hand, share capital represents the amount of capital raised by issuing shares to shareholders. It reflects the initial investments made by shareholders in the company. Share capital is a permanent source of funds for the company and is not available for distribution as cash dividends to shareholders.

Both retained profits and share capital contribute to the overall shareholders' equity of the company. While retained profits represent the accumulated earnings that are reinvested in the business, share capital represents the initial investments made by shareholders.

Since both retained profits and share capital are essential for the company's financial stability and growth, they are not available for distribution as cash dividends to shareholders. Therefore, the correct answer is option d: Both A and B.

Learn more about shareholders here :

https://brainly.com/question/30726450

#SPJ11

The journal entries would be:
- September 1: Debit Accounts Receivable, Credit Sales
- December 31: Debit Interest Receivable, Credit Interest Revenue
- March 1: Debit Cash, Credit Accounts Receivable, Credit Interest

On September 1, 2025, Crane Corporation sold goods to Pronghorn Decorators for $78,000 and accepted a 6-month, 6% note from Pronghorn.

Since Crane uses a periodic inventory system, the entry on September 1 would be as follows:
1. Debit Accounts Receivable - Pronghorn Decorators $78,000
2. Credit Sales $78,000

On December 31, an annual adjusting entry needs to be made to account for the interest accrued on the note. Assuming a 365-day year, the interest calculation would be ($78,000 * 6% * 3/12):
3. Debit Interest Receivable $1,170
4. Credit Interest Revenue $1,170

On March 1, when the note and interest are collected, the entry would be:
5. Debit Cash $79,170 ($78,000 + $1,170)
6. Credit Accounts Receivable - Pronghorn Decorators $78,000
7. Credit Interest Receivable $1,170

To know more about the journal entries visit:

https://brainly.com/question/30481288

#SPJ11

The equation used to calculate the present equivalent for an eternal investment is:

b. \( P=A(P / A, i, n) \)

In this equation, \( P \) represents the present equivalent, \( A \) is the annual cash flow, and \( (P / A, i, n) \) is the present value interest factor for an annuity. The present value interest factor for an annuity takes into account the interest rate (\( i \)) and the number of periods (\( n \)).

This equation is commonly used to determine the present value of a perpetuity or an infinite stream of cash flows that occur at regular intervals. By applying the present value interest factor for an annuity, the equation allows for the calculation of the present equivalent of the eternal investment.

Learn more about perpetuities and present value calculations in finance here:

https://brainly.com/question/33078477

#SPJ11

Calculate selling price per kitchen cabinet: (1) 25% margin of total cost, (2) 20% markup of production cost.

To calculate the selling price per kitchen cabinet, we need to consider the desired profit margin or markup.

i. Profit is to be maintained at 25% margin of total cost:

Calculate the total cost of producing the kitchen cabinets:

Direct labor cost: (Skilled labor cost + Semi-skilled labor cost) * Number of hours worked

Overhead cost: Total overhead cost absorbed based on the pre-determined overhead rates

Material cost: Cost of plywood, ceramic, hardware, assembly supplies, and cabinet designer service

Total cost: Direct labor cost + Overhead cost + Material cost

Calculate the selling price per cabinet:

Selling price = Total cost / Number of cabinets produced

Add 25% of the selling price to the cost to determine the final selling price.

ii. Profit is to be maintained at 20% markup of production cost:

Calculate the production cost per cabinet:

Production cost = Direct labor cost + Overhead cost + Material cost

Calculate the selling price per cabinet:

Selling price = Production cost + 20% markup of the production cost.

Perform the above calculations using the provided information to determine the selling price per kitchen cabinet based on the desired profit margin or markup.

To learn more about cost, click here: https://brainly.com/question/14566816

#SPJ11

Factors that influence supervisors when they set performance standards in an organization are given below:

. Expectations of the supervisors' employer

. The nature of work being monitored by the supervisors

. Experience of the supervisors

The above mentioned three factors can influence supervisors when they set performance standards in an organization.

The nature of work being monitored by the supervisors influences the performance standards by determining the number of tasks performed and the time taken to complete them. This can also include the conditions of the work environment.

Experience of the supervisors can influence performance standards by providing them with knowledge and insight into the work environment. This may include an understanding of the requirements of specific tasks and the work culture in which they operate.

The expectations of the supervisors' employer can influence performance standards by creating a culture of accountability. This can lead to the implementation of strict monitoring and reporting procedures, as well as the setting of performance goals and targets. It may also involve the implementation of performance-based pay and rewards systems.

To learn more about Factors that influence the standards of behavior in an organization : https://brainly.com/question/31920220

#SPJ11

An appeal is a legal process through which a party requests a higher court to review and reconsider a decision made by a lower court. It provides an opportunity for parties to challenge the outcome of a case if they believe there was an error in the application of the law or in the procedures followed during the trial.

An appeal is a legal process through which a party requests a higher court to review and reconsider a decision made by a lower court. appeals are an important part of the legal system as they provide an opportunity for parties to challenge the outcome of a case if they believe there was an error in the application of the law or in the procedures followed during the trial.

During an appeal, the appellate court reviews the record of the lower court proceedings, including the evidence presented and the legal arguments made. The appellate court may also hear oral arguments from the parties involved. The purpose of the appeal is to determine whether any errors were made that affected the fairness or legality of the lower court's decision.

After reviewing the case, the appellate court can take several actions. It may affirm the lower court's decision, meaning that it agrees with the outcome and reasoning of the lower court. It may also reverse the lower court's decision, meaning that it disagrees with the outcome and orders a different decision. In some cases, the appellate court may modify the lower court's decision, making changes to certain aspects of the ruling.

It is important to note that appeals are not automatic rights. Parties must meet certain requirements and deadlines to file an appeal. Additionally, appeals are generally limited to reviewing legal errors or procedural irregularities, rather than reevaluating the facts of the case.

About appeals here:

https://brainly.com/question/25938947

#SPJ11

The amount of general business credit generated in 2020 available for future years is $20,000, as that is the maximum amount Molly can utilize in 2020. The remaining $14,000 ($34,000 - $20,000) will not be utilized in 2020 and will be available for future years.

To calculate the available general business credit generated in 2020 for future years, we need to consider the carryforwards from previous years

First, let's sum up the general business credits generated and not utilized in the previous years:

2016: $2,500

2017: $7,500

2018: $5,000

2019: $4,000

Total carryforward from previous years = $2,500 + $7,500 + $5,000 + $4,000 = $19,000

In the current year, 2020, Molly's business generated an additional $15,000 general business credit.

Now, let's calculate the total general business credits available for 2020:

Total available credits for 2020 = Carryforwards from previous years + General business credit generated in 2020

Total available credits for 2020 = $19,000 + $15,000 = $34,000

However, Molly can only utilize a general business credit of up to $20,000 based on her tax liability before credits.

Therefore, the amount of general business credit generated in 2020 available for future years is $20,000, as that is the maximum amount Molly can utilize in 2020. The remaining $14,000 ($34,000 - $20,000) will not be utilized in 2020 and will be available for future years.

To know more about credits, visit:

https://brainly.com/question/24272208

#SPJ11

Based on the information provided, to determine which instrument you should purchase - the common stock or the convertible bond - we need to compare the potential returns.

If you invest $800 at $25 per share, you will be able to purchase 32 shares (800 / 25 = 32). If the stock price rises to $33 per share in 1 year, the value of your investment will be 32 * 33 = $1056. This represents a gain of $1056 - $800 = $256.

Comparing the potential gains, the common stock offers a higher return of $256, while the convertible bond offers a return of $240. Therefore, based on the expected rise in stock price, you should purchase the common stock.

To know more about convertible bond visit:-

https://brainly.com/question/14327144

#SPJ11

The answer for the English Phrasal Verbs/idioms is given below:

(a) In Conversation:
1. Pay attention to context: Phrasal verbs and idioms often have different meanings depending on the context. Look for clues in the conversation to understand the intended meaning.
2. Break it down: Identify the verb and the particle or preposition in the phrasal verb. Understanding the individual words will help you grasp the overall meaning.
3. Practice: Engage in conversations with native English speakers or watch videos of conversations to expose yourself to different phrasal verbs and idioms in context.
4. Use resources: Online dictionaries, textbooks, and language learning apps provide definitions and examples of phrasal verbs and idioms used in conversation.

(b) In English Movies or TV Shows:
1. Contextual clues: Pay attention to the situation, expressions, and gestures used in the scene. They can give you hints about the meaning of the phrasal verb or idiom.
2. Subtitles: If available, read the subtitles to understand the exact words being spoken. Subtitles can provide a literal translation of the phrasal verb or idiom.
3. Take notes: Write down unfamiliar phrasal verbs and idioms while watching. Look them up later to understand their meanings and usage.
4. Watch with native speakers: Discuss the movie or TV show with native English speakers. They can explain the meanings and nuances of the phrasal verbs and idioms used.

Learn more about Pay attention to context from the given link:

https://brainly.com/question/22373338

#SPJ11

When the U.S. dollar becomes weaker, U.S. exports become more competitive in foreign markets.A strong peso is likely associated with either increased interest rates or decreased inflation in Mexico.

A weaker U.S. dollar makes U.S. exports relatively less expensive when compared to goods from other countries. This increased competitiveness can lead to higher demand for U.S. exports in foreign markets. As a result, U.S. exporters may benefit from increased sales and market share.

On the other hand, a strong peso in Mexico can be associated with either increased interest rates or decreased inflation. Increased interest rates can attract foreign investment and strengthen the value of the peso. This scenario may occur when the central bank raises interest rates to control inflation or to stabilize the currency.

Similarly, decreased inflation in Mexico can also contribute to a stronger peso as it enhances the purchasing power of the currency.

In conclusion, a weaker U.S. dollar boosts the competitiveness of U.S. exports, while a strong peso in Mexico can be linked to increased interest rates or decreased inflation.

Learn more about exports here: brainly.com/question/13663581

#SPJ11

QUESTION IMAGE

The statement is true. A monopolist does not achieve productive efficiency because it does not produce at the minimum point of the cost curve.

Instead, a monopolist produces at a level of output where marginal cost (MC) is equal to marginal revenue (MR), maximizing its own profits rather than minimizing costs. Productive efficiency occurs when a firm produces at the minimum point of its average total cost (ATC) curve, where each unit of output is produced at the lowest possible cost.

In perfect competition, firms achieve productive efficiency because they are price takers and operate at the point where price equals marginal cost, which corresponds to the minimum point of the ATC curve. However, monopolists have market power and face a downward-sloping demand curve, allowing them to set higher prices and restrict output.

A monopolist's profit-maximizing level of output occurs where MR equals MC. This level of output is typically lower than what would be produced under perfect competition. As a result, the monopolist operates at a higher point on its ATC curve, away from the minimum point. This means that the monopolist is not achieving productive efficiency since it is not minimizing its costs per unit of output.

In conclusion, due to their ability to control prices and limit output, monopolists do not achieve productive efficiency. They produce at a level of output that maximizes their profits, often leading to higher prices and higher costs per unit compared to a perfectly competitive market.

Learn more about ATC curve here :
brainly.com/question/13933442

#SPJ11

Monopolistic competition leads to prices, but product variety.

The blank 1 should be filled with the word higher, whereas the blank 2 should be filled with the word degree.

If new firms enter a monopolistically competitive industry, an individual firm's demand curve will decrease.

Monopolistic competition is a type of market structure that incorporates some aspects of both a perfectly competitive market and a monopoly. In monopolistic competition, many firms compete with each other, but each firm produces a slightly different product. Product differentiation, which refers to the existence of many close but not perfect substitutes, is the defining feature of monopolistic competition. Because of the large number of companies in the market, each firm's market share is relatively tiny. This ensures that no single firm can dominate the market, ensuring that there is no collusion among companies to raise prices. In monopolistic competition, firms will attempt to differentiate their products as much as possible to win a larger market share.

As a result, they will employ a variety of strategies, such as advertising, product features, and packaging, to attract consumers to their products. Firms in this market structure, unlike perfect competition, can earn economic profit in the short run because of product differentiation.

To learn more about Monopolistic Competition : https://brainly.com/question/2891218

#SPJ11

The wealth disparities between core and periphery countries, as well as within each country, have become more extreme since 1965 due to increasing globalization.

Several factors contribute to the widening gap like historical factors, globalization, and many more.

1. Historical Factors: Core countries, such as the United States, Europe, and Japan, have historically been more developed and industrialized compared to periphery countries, which often have limited access to resources and technology.

This historical advantage has allowed core countries to accumulate wealth and establish strong economies, while periphery countries struggle to catch up.

2. Globalization and Trade: With increasing globalization, core countries have been able to expand their economies through international trade. They often possess advanced industries and technology, allowing them to dominate global markets and attract foreign investment.

Periphery countries, on the other hand, may rely on exporting raw materials or low-value-added goods, which limits their economic growth and keeps them dependent on core countries.

3. Capital Flight: Globalization has enabled the movement of capital across borders more easily. This has led to capital flight, where wealthy individuals and corporations from periphery countries move their money to core countries for better investment opportunities and financial stability. As a result, wealth leaves periphery countries, exacerbating the wealth disparities.

4. Unequal Distribution of Resources: Within each country, the gap between the rich and the poor has widened due to the unequal distribution of resources.

In many cases, the elite class in core and periphery countries controls a significant portion of the wealth, while the majority of the population struggles to meet their basic needs. Corruption, lack of access to education and healthcare, and limited job opportunities contribute to this inequality.

5. Technological Advancements: Technological advancements, driven by globalization, have further widened the wealth gap.

Automation and digitalization have led to job losses in certain sectors, impacting low-skilled workers more severely. Core countries, with their advanced technology and skilled workforce, benefit from these advancements, while periphery countries struggle to keep up.

In summary, the wealth disparities between core and periphery countries, as well as within each country, have become more extreme since 1965 due to historical factors, globalization, unequal distribution of resources, capital flight, and technological advancements. These factors interact and reinforce each other, widening the gap between the rich and the poor.

To know more about globalization refer here:

https://brainly.com/question/16788953#

#SPJ11

Complete Question:

Why are the wealth disparities more extreme between the core and periphery countries, and inside each country, since 1965 and with increasing globalization? Why do you think the gap has widened?

a) Theoretical justifications to regulate public utilities:1. Natural Monopoly 2. Consumer Protection Methodology employed to regulate public utilities  Cost-of-Service Regulation ,Rate-of-Return Regulation The cost-of-service methodology assumes  Efficient Cost Structure

1. Natural Monopoly: Public utilities often operate in industries where achieving economies of scale is crucial. Due to high fixed costs and barriers to entry, a single firm may be more efficient in providing services to the entire market. Regulation helps prevent the abuse of monopoly power by setting prices, ensuring fair access, and promoting competition where feasible.

2. Consumer Protection: Public utilities provide essential services that are vital for public welfare. Regulation ensures that these services are accessible, reliable, and affordable for consumers. It sets standards for service quality, safety, and reliability, protecting consumers from exploitation and ensuring fair treatment.

3. Externalities: Public utilities can have external effects on the environment, public health, and safety. Regulation helps address these externalities by setting standards for environmental protection, emissions, and safety measures. It ensures that utilities consider the social costs associated with their operations.

b) Methodology employed to regulate public utilities:

Most jurisdictions employ a combination of the following regulatory methodologies:

1. Cost-of-Service Regulation: This methodology determines the allowable revenue for utilities by examining their costs, including operating expenses, depreciation, and a fair return on investment. It sets rates based on a "cost-plus" approach, where the utility's costs are covered, and it is allowed a reasonable profit margin.

2. Rate-of-Return Regulation: This approach determines the allowed return on investment for the utility. The regulatory authority sets a specific rate of return, and the utility's revenue is adjusted to ensure it achieves that return on its invested capital.

3. Performance-Based Regulation: This methodology focuses on incentivizing utilities to meet specific performance targets rather than directly controlling prices. Performance metrics can include service quality, customer satisfaction, reliability, and energy efficiency. Utilities that meet or exceed these targets may be eligible for rewards or additional revenue.

c) Assumptions implicit in the cost-of-service methodology:

The cost-of-service methodology assumes:

1. Efficient Cost Structure: It assumes that the utility's cost structure is efficient, and expenses are reasonable and necessary to provide the required services.

2. Prudent Investment: It assumes that the utility's investment decisions are prudent and aimed at improving service quality and efficiency.

3. Reasonable Profit: It assumes that the utility is entitled to earn a reasonable rate of return on its investments to attract capital and ensure financial viability.

d) How the cost-of-service methodology cures the natural monopoly problem:

The cost-of-service methodology addresses the natural monopoly problem by setting rates that allow the utility to recover its costs and earn a reasonable profit. This approach helps avoid the exploitation of monopoly power by ensuring that prices are reasonable, affordable, and reflective of the costs involved. By providing a regulated return on investment, it incentivizes efficient operations and investments that benefit consumers while maintaining the viability of the utility.

e) Limitations of the cost-of-service methodology:

1. Allocative Inefficiency: The cost-of-service methodology may not encourage utilities to minimize costs or innovate since their revenue is directly linked to their expenses. It can lead to allocative inefficiency and discourage cost-saving measures.

2. Limited Incentives for Performance: This methodology may not sufficiently incentivize utilities to improve service quality, reliability, or efficiency beyond the minimum requirements set by regulators.

3. Regulatory Capture: There is a risk of regulatory capture, where the regulated utility influences the regulatory process to its advantage, potentially compromising the effectiveness of regulation.

4. AJ Hypothesis: The Average-Cost Pricing-Jackknife (AJ) Hypothesis suggests that cost-of-service regulation may result in overinvestment and inefficient use of resources. This hypothesis argues that regulators may overestimate costs or allow utilities to inflate their expenses, leading to higher rates and reduced efficiency.

To learn more about PUBLIC UTILITY  click here:

brainly.com/question/32380199

#SPJ11

most jurisdictions public utilities (e.g. electricity providers and natural gas providers) are regulated

a) Standard theoretical justifications to regulate public utilities include the presence of natural monopolies, the need for consumer protection, and the management of externalities. Natural monopolies arise due to high fixed costs and economies of scale, making it more efficient to have a single provider. Regulation prevents monopolistic abuse and ensures fair pricing. Consumer protection is necessary as public utilities provide essential services, and regulation safeguards against unfair practices and inadequate service. Externalities, such as environmental impacts, can be addressed through regulations to mitigate negative effects.

b) Most jurisdictions employ a regulatory methodology that includes rate setting, service quality standards, and consumer protection provisions. Regulators determine rates based on cost recovery and a fair return on investment, establish performance standards for service quality, and ensure consumer rights are protected.

c) Assumptions implicit in the cost-of-service methodology include efficient operation, cost recovery, and fairness in cost allocation among customer classes based on cost causation principles.

d) The cost-of-service methodology addresses the natural monopoly problem by allocating costs among customer classes based on usage patterns and cost causation, establishing rates that allow the utility to recover costs and earn a fair return, and setting service quality standards to ensure reliable service provision.

e) Limitations of the cost-of-service methodology include potential allocative inefficiency, lack of innovation incentives, and the AJ hypothesis, suggesting that regulatory decisions may be influenced by political and economic interests, potentially deviating from economic efficiency and consumer welfare. Alternative regulatory approaches, such as performance-based or incentive-based regulation, have been adopted to address these limitations.

Know more about jurisdictions here

https://brainly.com/question/12448353#

#SPJ11

In the foreign exchange markets, spot transactions and forward transactions are two common types of transactions that occur daily. Forward transactions are advantageous for hedging currency risk and speculation.

Spot transactions involve the immediate exchange of currencies at the current market rate. These transactions are settled within two business days, and the delivery of the currencies takes place almost instantly. Spot transactions are commonly used for immediate payment obligations, such as buying goods or services from a foreign country.

On the other hand, forward transactions involve the agreement to exchange currencies at a future date, but at a predetermined exchange rate. These transactions are useful for hedging against potential currency fluctuations. For example, if a US investor is planning to invest in the Euro but expects the Euro to depreciate against the US dollar in the future, they can enter into a forward transaction to lock in a favorable exchange rate.

Two circumstances where forward market transactions are advantageous include:
1. Hedging currency risk: Forward transactions allow businesses to mitigate the risk of adverse currency movements. For instance, an exporter who expects to receive payment in a foreign currency in the future can enter into a forward contract to protect against potential currency depreciation.

2. Speculation: Investors can engage in forward transactions to speculate on future currency movements. By taking a view on the future exchange rate, investors can potentially earn profits if their predictions are correct.

In summary, spot transactions involve immediate currency exchange at the current market rate, while forward transactions involve exchanging currencies at a predetermined rate on a future date.

To know more about the transactions visit:

https://brainly.com/question/33778628

#SPJ11

To calculate the total cash flow in year 4 for Geary Machine Shop's project, we need to consider the annual cost savings, tax implications, salvage value, and inventory investments. By applying the appropriate calculations, we can determine the net cash flow in year 4, taking into account the present value of future cash flows.

To calculate the total cash flow in year 4, we need to consider various components:

1. Annual pretax cost savings: The project is estimated to result in $200,443 in annual pretax cost savings.

2. Tax implications: The tax rate for Geary Machine Shop is 0.31. To calculate the after-tax cost savings, we multiply the annual pretax cost savings by (1 - tax rate).

After-tax cost savings = Annual pretax cost savings * (1 - tax rate)

After-tax cost savings = $200,443 * (1 - 0.31) = $200,443 * 0.69 = $138,297.67 (rounded to the nearest cent).

3. Salvage value: The machine press will have a salvage value at the end of the project, estimated to be $113,813.

4. Initial investment in spare parts inventory: The shop needs to invest $75,966 in spare parts inventory at the beginning of the project.

5. Additional inventory investment: Each succeeding year of the project requires an additional $12,926 in inventory.

To calculate the net cash flow in year 4, we need to consider the after-tax cost savings, salvage value, and inventory investments. The net cash flow is the sum of these cash flows.

Net cash flow in year 4 = After-tax cost savings + Salvage value - Additional inventory investment in year 4

Net cash flow in year 4 = $138,297.67 + $113,813 - $12,926 = $239,184.67

Therefore, the total cash flow in year 4 for Geary Machine Shop's project is $239,184.67.

learn more about inventory here: https://brainly.com/question/31146932

#SPJ11

The interest earned over the 1325-day period is $1,815.63, and the amount in the account at the end of the 1325-day period is $17,815.63.

To calculate the interest earned, we use the formula: Interest = Principal x Rate x Time. The principal is $16,000.00, the rate is 3(1)/(4)% or 0.0375, and the time is 1325 days. Plugging these values into the formula, we find that the interest earned is $1,815.63. To find the total amount in the account at the end of the period, we add the interest to the principal: $16,000.00 + $1,815.63 = $17,815.63. Thus, Rippy will have $17,815.63 in the account at the end of the 1325-day period.

During the 1325-day period, Rippy's investment accrues simple interest at a rate of 3(1)/(4)%. This means that for each year, Rippy earns 3.75% interest on the initial investment. Over the course of 1325 days, the interest compounds continuously, resulting in a total interest of $1,815.63.

This interest is added to the initial investment of $16,000.00, resulting in a final account balance of $17,815.63 at the end of the 1325-day period. It's important to note that simple interest does not account for compounding, meaning the interest earned remains constant over the specified time frame. For more accurate calculations of interest, compound interest formulas can be used, which take into account the compounding effect and provide a more precise estimation of earnings.

Learn more about investment here:

https://brainly.com/question/15105766

#SPJ11

The answer is option e) Integrative linkage.

EMX Corporation, a consumer electronics manufacturer, exemplifies the integrative linkage level of integration of HRM into the strategic management process. Integrative linkage is the highest level of integration, where the HRM function is fully integrated into all phases of the company's strategic management process. This means that the HRM manager has a significant impact on the company's strategy, and the company's strategy affects HRM policies and practices. It indicates that HRM is an essential and valued part of the company's overall strategy.

The other levels of integration mentioned are:

Therefore, in the case of EMX Corporation, the level of integration of HRM into the strategic management process is integrative linkage.

Learn more about integrative linkage:

https://brainly.com/question/24376351

#SPJ11

In the long-run equilibrium of the competitive widget market, firms will operate at a point where their economic costs are minimized and there are no incentives for entry or exit from the industry. The long-run economic cost function for each firm is given by CLR(q) = 32 + 2q^2, where q represents the quantity of widgets produced. The marginal cost function is 4q, and the average cost function is 32/q + 2q.

To determine the long-run equilibrium, we need to find the quantity at which each firm minimizes its costs. The marginal cost function represents the change in total cost when one more unit is produced, while the average cost function represents the cost per unit. In the long run, firms aim to produce at the point where marginal cost equals average cost.

Setting the marginal cost equal to the average cost, we have:

4q = 32/q + 2q

Simplifying this equation, we get:

4q^2 = 32 + 2q^2

2q^2 = 32

q^2 = 16

q = ±4

Since quantity cannot be negative, we consider q = 4 as the equilibrium quantity. Therefore, in the long-run equilibrium, each firm will produce 4 widgets.

At this equilibrium quantity, the average cost can be calculated as:

Average cost = 32/q + 2q

Average cost = 32/4 + 2(4)

Average cost = 8 + 8

Average cost = 16

Hence, in the long-run equilibrium, each firm will produce 4 widgets, and the average cost of production will be 16 units per widget. This equilibrium represents a state where firms in the widget market are operating efficiently, with no incentive for new firms to enter or existing firms to exit the industry.

learn more about economic here: brainly.com/question/32861646

#SPJ11

The margin of safety ratio is calculated by dividing the margin of safety dollars by the actual sales dollars and multiplying by 100. So, $20,000 divided by $175,000 multiplied by 100 gives us a margin of safety ratio of 11.43%.

To determine the contribution margin, we need to calculate the total sales, total variable costs, and the contribution margin ratio. First, let's calculate the total sales. We know that the salon provided 3,500 haircuts, shampoos, and permanents at an average price of $50. Therefore, the total sales would be 3,500 multiplied by $50, which equals $175,000.

Next, let's calculate the total variable costs. We are told that variable costs are 80% of sales. So, 80% of $175,000 is $140,000. To find the contribution margin in dollars, we subtract the total variable costs from the total sales. $175,000 minus $140,000 equals $35,000.

The contribution margin per unit is calculated by dividing the contribution margin in dollars by the number of units sold. In this case, it would be $35,000 divided by 3,500, which equals $10. To find the contribution margin ratio, we divide the contribution margin in dollars by the total sales and multiply by 100. So, $35,000 divided by $175,000 multiplied by 100 gives us a contribution margin ratio of 20%.

Using the contribution margin technique, we can compute the break-even sales dollars and sales units. The break-even sales dollars would be the fixed costs divided by the contribution margin ratio. In this case, it would be $31,000 divided by 0.20, which equals $155,000. The break-even sales units would be the break-even sales dollars divided by the average price per unit. So, $155,000 divided by $50 gives us 3,100 units.

Finally, let's compute the margin of safety dollars and ratio. The margin of safety dollars is calculated by subtracting the break-even sales dollars from the actual sales dollars. In this case, it would be $175,000 minus $155,000, which equals $20,000.

To know more about the sales visit:

https://brainly.com/question/28147419

#SPJ11

(a) To calculate the market price of the bond, we can use the present value formula. The bond has a 7% coupon rate, with annual payments, and a yield to maturity of 5.85%. The maturity period is 9 years.

Using a financial calculator or spreadsheet, we can calculate the present value of the bond's cash flows:

PV = (70 / (1 + 0.0585)^1) + (70 / (1 + 0.0585)^2) + ... + (70 / (1 + 0.0585)^9) + (1000 / (1 + 0.0585)^9)

By summing up the present values of the coupon payments and the face value payment at maturity, we can determine the market price of the bond.

(b) In this case, the bond has a 6% coupon rate, with semiannual payments, and a yield to maturity of 12.9%. The maturity period is 11 years.

Similar to the previous calculation, we can use the present value formula to calculate the market price of the bond:

PV = (30 / (1 + 0.129/2)^1) + (30 / (1 + 0.129/2)^2) + ... + (30 / (1 + 0.129/2)^22) + (1000 / (1 + 0.129/2)^22)

By summing up the present values of the semiannual coupon payments and the face value payment at maturity, we can determine the market price of the bond.

Learn more about market price of the bond here:

brainly.com/question/32138254

#SPJ11

In the standard AS/AD model, financial bubbles play no role in determining whether an economy exceeds potential output. This model primarily focuses on inflation in the general price level to determine whether actual output has exceeded potential output.

In the standard AS/AD model, financial bubbles play no role in determining whether an economy exceeds potential output. This model primarily focuses on inflation in the general price level to determine whether actual output has exceeded potential output.

The AS/AD model analyzes the relationship between aggregate supply (the total amount of goods and services produced in an economy) and aggregate demand (the total amount of goods and services demanded in an economy). It helps explain changes in output, employment, and price levels in the short run.

Potential output represents the maximum sustainable level of production an economy can achieve when all resources are fully utilized. It is not directly influenced by financial bubbles.

Financial bubbles, on the other hand, refer to situations where the prices of certain assets, such as stocks or real estate, rise rapidly and exceed their fundamental values. These bubbles can have significant effects on the economy, but they are not considered in the AS/AD model when determining whether an economy exceeds potential output.

Learn more:

About AS/AD model here:

https://brainly.com/question/32390184

#SPJ11

According to the lecture, the property of organizational communication network links that is NOT mentioned is parallelism (option c). The correct option is c.

In organizational communication, parallelism refers to the existence of multiple communication channels between the same individuals or groups.

However, this property is not included in the lecture as a characteristic of organizational communication network links.
Let's go through the other options:
a. Strength: This refers to the intensity or robustness of the communication network links. It measures the extent to which communication flows smoothly and effectively within the organization.
b. Symmetry: Symmetry refers to the balance or equality in communication exchanges between individuals or groups. It implies that communication is reciprocal and occurs on an equal level.
d. Multiplexity: This property refers to the number of different types of relationships or interactions that exist between individuals or groups in the communication network. It recognizes that people may communicate for various reasons and in different contexts.
e. None of the above: This option is not the correct answer because parallelism is not mentioned as a property of organizational communication network links in the lecture.
To summarize, based on the lecture, the property of organizational communication network links that is NOT included is parallelism. The correct option is c.

For more such questions on parallelism

https://brainly.com/question/1466033

#SPJ11

The hardware and software an organization needs to compete in the marketplace include:

C. Information(IT): IT refers to the entire range of technologies used for managing and processing information within an organization. It encompasses hardware, software, networks, and databases.

E. Information systems (IS): IS are the systems and processes that collect, store, process, and disseminate information within an organization. It includes both the technology (hardware and software) and the people who use and manage the information.

D. Management information systems (MIS): MIS are specific information systems designed to support managerial decision-making within an organization. They provide managers with the necessary information to make informed decisions and monitor organizational performance.

B. Decision Support Systems (DSS): DSS are a type of information system that assists decision-makers in analyzing complex data and making decisions. They utilize advanced analytical tools and models to provide insights and support decision-making processes.

A. Human Resources Networks (HRN): This term seems to be a combination of two concepts. Human Resources (HR) refers to the management of an organization's workforce, including recruitment, training, and employee relations. Networks, in the context of IT, refers to the interconnected systems and devices that facilitate communication and data sharing. While HR and networking are important components of an organization's operations, they are not typically referred to as hardware or software needed to compete in the marketplace.

In summary, the hardware and software an organization needs to compete in the marketplace include information technology (IT), information systems (IS), management information systems (MIS), and decision support systems (DSS).

Learn more about technology here:

https://brainly.com/question/28288301

#SPJ11

On March 17, Advanced Technologies purchased a patent related to laser surgery techniques. The recorded cost of the patent is $1,291,000.

The recorded cost of the patent consists of the purchase price of the patent plus any additional costs directly attributable to acquiring and developing the patent. In this case, the purchase price of the patent is $1,230,000.

In addition to the purchase price, the company incurred several additional costs related to the patent. These costs include $23,000 in legal fees, $38,000 for advertising, and $1,230,000 for internal development. These costs are considered direct costs associated with acquiring and developing the patent.

Therefore, to calculate the recorded cost of the patent, we sum up the purchase price and the additional costs: $1,230,000 + $23,000 + $38,000 + $1,230,000 = $2,521,000.

However, it is mentioned that all additional costs were incurred for the same amount. Since the additional costs are incurred for the same amount as the purchase price, we need to subtract the duplicate amount ($1,230,000) to avoid double-counting: $2,521,000 - $1,230,000 = $1,291,000.

Hence, the recorded cost of the patent is $1,291,000.

Learn more about costs here : https://brainly.com/question/32817332

#SPJ11

In this activity, we are given a worksheet that needs to be completed with adjustments. The adjustments involve three different accounts: office supplies, insurance, and hydro expenses.

Let's go through each adjustment step by step:
1. Office Supplies:
  - We are told that all of the office supplies have been used up this period. Therefore, we need to decrease the Office Supplies account on the Balance Sheet.
  - To do this, we will debit the Office Supplies account by the amount used.

2. Insurance:
  - It is stated that $431.50 of insurance has been used.
  - We need to reduce the Prepaid Insurance account on the Balance Sheet.
  - To do this, we will debit the Insurance Expense account and credit the Prepaid Insurance account by $431.50.

3. Hydro Expenses:
  - We are informed that $90 has been spent on hydro this period, but the bill has not arrived yet.
  - We need to increase the Hydro Expense account on the Income Statement.
  - To do this, we will debit the Hydro Expense account by $90.

Make sure to update the respective accounts on the worksheet with these adjustments. This will ensure that the Trial Balance, Income Statement, and Balance Sheet are accurate.

In summary, the adjustments involve decreasing the Office Supplies and Prepaid Insurance accounts, and increasing the Hydro Expense account. Remember to update the worksheet with these adjustments accordingly.

To know more about the accounts visit:

https://brainly.com/question/14802950

#SPJ11

To create common size financial statements, all income statement items are divided by total revenues, and all balance sheet accounts are divided by a relevant base amount, such as total assets or total liabilities and equity. The above statement is false.

Common size financial statements are used to analyze and compare financial statements of different companies or to track changes within a company over time. They express each line item as a percentage of a base amount, which allows for easier comparison and identification of trends.

In the case of the income statement, all items are divided by total revenues to calculate the percentage of each item relative to sales. This provides insights into the composition of expenses and profitability.

For the balance sheet, the common size approach involves dividing each account by a base amount, such as total assets. This allows for a better understanding of the composition of assets, liabilities, and equity and their relative proportions.

By using different base amounts for income statement and balance sheet items, common size financial statements provide a more meaningful analysis of a company's financial performance and structure.

Therefore, to create common size financial statements, all income statement items and balance sheet accounts are divided by total assets is false.

Learn more about  assets here:

brainly.com/question/14826727

#SPJ11

Based on the information provided, let's calculate the total increase or decrease in income by replacing the current spotter truck with the new truck:

Variable manufacturing costs with the current spotter truck: $85,000 per year

Variable manufacturing costs with the new spotter truck: $85,000 - $26,000 = $59,000 per year

Annual cost savings by using the new spotter truck: $85,000 - $59,000 = $26,000

The new spotter truck costs $130,000, and there is a trade-in value of $32,000 for the old spotter truck.

Net cash outflow for acquiring the new spotter truck: $130,000 - $32,000 = $98,000

Since the old spotter truck has a remaining useful life of 5 years and no salvage value at the end, the relevant cost savings are for the next 5 years.

Total cost savings over 5 years: $26,000 x 5 = $130,000

The net increase or decrease in income can be calculated as follows:

Net increase or decrease in income = Total cost savings - Net cash outflow

= $130,000 - $98,000

= $32,000

Therefore, the total increase or decrease in income by replacing the current spotter truck with the new truck is a $32,000 decrease.

To know more about Variable manufacturing costs click this link-

https://brainly.com/question/31856026

#SPJ11

The word that best completes the sentence is "executing." In the given sentence, the manager is providing employees with resources and coordinating their activities. This indicates that the manager is actively involved in implementing the plan, which is a part of executing a tactical plan.

When developing a tactical plan, the manager focuses on setting goals, analyzing resources, and determining the strategies and actions required to achieve those goals. This involves creating a plan and identifying the necessary resources.

On the other hand, executing a tactical plan involves putting the plan into action. This includes assigning tasks to employees, providing resources, coordinating activities, monitoring progress, and making adjustments as needed.

Therefore, in the context of the sentence, the manager is executing the plan by providing resources and coordinating activities.

To summarize, the manager is executing the plan by providing resources and coordinating activities. Developing a tactical plan involves creating the plan and identifying resources, while executing a tactical plan involves putting the plan into action.

Learn more about a tactical plan: https://brainly.com/question/34058386

#SPJ11

The level of significance in nursing research is a statistical measure used to determine the likelihood that the results of a study are due to chance. It helps researchers determine whether the findings are statistically significant and can be generalized to the larger population.

In nursing research, the level of significance is a statistical measure used to determine the likelihood that the results of a study are due to chance. It helps researchers determine whether the findings are statistically significant and can be generalized to the larger population.

The level of significance is typically set at a predetermined value, known as the alpha level. Commonly used alpha levels in nursing research are 0.05 (5%) and 0.01 (1%). The choice of the appropriate level of significance depends on various factors, including the research question, study design, sample size, and the desired balance between Type I and Type II errors.

Type I error refers to rejecting a true null hypothesis, while Type II error refers to failing to reject a false null hypothesis. Researchers need to carefully consider these factors and select an appropriate level of significance that aligns with the goals and objectives of their study.

About level of significance here:

https://brainly.com/question/4599596

#SPJ11