someone help please and asap

The order for mass is atom, molecule, mole, gram.  In current physics, mass has several meanings that are theoretically distinct but physically equal.

A body's mass is an inherent attribute. Till the discovery of the atom as well as particle physics, it was thought to be tied to the amount of matter inside a physical body.

It was discovered that although having the same quantity of stuff, various atoms and fundamental particles had varying masses. In current physics, mass has several meanings that are theoretically distinct but physically equal. The order for mass is atom, molecule, mole, gram.

Therefore, the order for mass is atom, molecule, mole, gram.

To know more about mass, here:

https://brainly.com/question/1838164

#SPJ9

Increasing the volume of the system will have no effect on the mole fraction of Cl2 in the equilibrium mixture.

This is because the mole fraction is the ratio of moles of a specific component to the total moles of all components in the system. Increasing the volume will not change the number of moles of any specific component in the system, hence the mole fraction of Cl2 will remain constant.

The only factor that would affect the mole fraction of Cl2 is a change in the number of moles of Cl2 or any other component in the system. This can be achieved by adding or removing a specific component or by changing the temperature or pressure of the system. However, changing the volume alone will not affect the mole fraction of Cl2 or any other component in the system.

Learn more about equilibrium mixture

brainly.com/question/28061153

#SPJ4

Shearing stress is most likely to occur at this boundary. Therefore, option A is correct.

Shearing stress is defined as "a type of stress that acts coplanar with the material's cross-section." Shear stress is caused by shear forces. They are the same magnitude and opposite direction forces acting on opposite sides of a body. Shear stress is measured as a vector quantity.

A strike-slip fault is a dip-slip fault with a vertical dip in the fault plane caused by shear stresses. The San Andreas Fault in California is the world's most well-known strike-slip fault.

Thus, option A is correct.

To learn more about the shearing stress, follow the link;

https://brainly.com/question/30328948

#SPJ9

Your question is incomplete, most probably your question was

What type of stress is most likely to occur at this

boundary?

O shearing

syncline

tension

compression

Atomic absorption lines are sharper than the absorption spectrum of a molecule dissolved in solution because Atomic spectra are pure electronic spectra.

Atomic spectra are pure electronic spectra  where as molecular spectra are a combination of electronic, vibrational and microwave spectra which makes the absorption spectrum of a molecule broad.

The presence of spectral lines is explained by amount mechanics in terms of the energy situations of tittles, ions and motes. These energy situations depend on the figures of protons, electrons and neutrons in an snippet, and the limited set of configurations in which these essential patches can live( the set of amount figures). tittles prefer to be in their ground state, where all of the electrons are located as close to the nexus as possible.

Absorption lines do when an snippet, element or patch absorbs a photon with an energy equal to the difference between two energy situations. This causes an electron to be promoted into a advanced energy position, and the snippet, element or patch is said to be in an agitated state.

Learn more about Atomic absorption lines:

https://brainly.com/question/15591186

#SPJ4

From the given information, 52.55 grams of ethanol are required to make a 7.1 M solution using 160.0 ml of water.

To determine how many grams of ethanol are required to make a 7.1 M solution using 160.0 ml of water, we first need to calculate the number of moles of ethanol required.

Molarity is defined as moles of solute per liter of solution, so we can use the following formula to calculate the number of moles of ethanol:

Molarity = moles of solute / volume of solution

Rearranging the formula to solve for moles of solute gives:

moles of solute = Molarity x volume of solution

Substituting the values, we get:

moles of ethanol = 7.1 mol/L x (0.160 L) = 1.136 mol

Now we can use the molecular weight of ethanol to convert moles to grams:

molecular weight of ethanol = 46.07 g/mol

mass of ethanol = moles of ethanol x molecular weight of ethanol

mass of ethanol = 1.136 mol x 46.07 g/mol

mass of ethanol = 52.55 g

Learn more about molarity here: brainly.com/question/14469428

#SPJ4

Dendrites is a part of the neuron receives input in the form of chemical stimuli.

Chemical stimuli, such as neurotransmitters, are received by the dendrites of a neuron. Dendrites are the branched extensions of a neuron that receive signals from other neurons or from sensory receptors. When a neurotransmitter molecule binds to a receptor on the dendrite, it can trigger an electrical signal (action potential) that travels down the length of the neuron and can cause the release of neurotransmitters from the axon terminal, which in turn can stimulate the dendrites of other neurons. Thus, dendrites play a critical role in integrating the signals received by a neuron and transmitting them to the cell body (soma) and ultimately to the axon, where they can be propagated to other neurons.

learn more about Dendrite here:
https://brainly.com/question/13022334
#SPJ4

1.375 g sample of a sugar found in seaweed is burned completely in oxygen to give 1.993 g of co2 and 0.9519 g of h2o then the empirical formula for the sugar is C2H3O

To find the empirical formula of the sugar, we need to determine the number of moles of carbon, hydrogen, and oxygen in the sample.
First, we need to determine the number of moles of carbon in the sample. We can do this by dividing the mass of CO2 produced by the molar mass of CO2:
1.993 g CO2 / 44.01 g/mol = 0.04529 mol C

Next, we need to determine the number of moles of hydrogen in the sample. We can do this by dividing the mass of H2O produced by the molar mass of H2O:
0.9519 g H2O / 18.015 g/mol = 0.05278 mol H

Finally, we can calculate the number of moles of oxygen by subtracting the moles of carbon and hydrogen from the total number of moles in the sample:
0.135 g / (12.011 g/mol *0.04529mol) = 2.365 ≈ 2
0.135 g / (1.008 g/mol *0.05278mol) = 2.525 ≈ 3
0.135 g / (15.999 g/mol *2mol) = 0.00422 ≈ 0

Therefore, the empirical formula for the sugar is C2H3O.

Learn more about empirical formula here:

https://brainly.com/question/14044066

#SPJ4

For water: q = cmΔT = 4.18 ∙ 150 (32.6 – 22.4) = 6395.4J

For brass: c = q / mΔT = 6395 / 127.68 (163 – 32.6) = 0.384 J / gC

What is water?

To know more about water, click the link given below:

https://brainly.com/question/28465561

#SPJ1

Answer:

The rate law for the overall reaction is given by the rate-determining step, which is the slowest step in the mechanism. In this case, the slowest step is the first step, where C4H9Br is converted to C4H9+ and Br-. Hence, the rate law for the overall reaction can be expressed as:

Rate = k[C4H9Br]

where k is the rate constant for the first step.

The overall balanced equation for the reaction is:

C4H9Br + H2O --> C4H9OH + HBr

The intermediates in the proposed mechanism are C4H9+ and C4H9OH2.

The highest oxidation state for Nb (niobium) is +5.

Oxidation is the loss of electrons in a chemical reaction. For the element niobium (Nb), the highest oxidation state is +5. This is because niobium has five valence electrons in its outermost shell, which it can lose to form a +5 oxidation state.

This is commonly seen in compounds such as Nb₂O₅ (niobium pentoxide) and NbF₅ (niobium pentafluoride). That being said, it is important to note that niobium can also form lower oxidation states, such as oxidation state +3 and +4. However, the +5 state is the highest possible for niobium.

Learn more about oxidation at https://brainly.com/question/25886015

#SPJ11

The oxidation of borneol to camphor using sodium dichromate in acid can be represented by the following balanced equation:

C10H18O + Na2Cr2O7 + 4H2SO4 → C10H16O + Cr2(SO4)3 + Na2SO4 + 4H2O

In this reaction, the sodium dichromate (Na2Cr2O7) is reduced to chromium(III) sulfate (Cr2(SO4)3), while the borneol (C10H18O) is oxidized to camphor (C10H16O) and sulfuric acid (H2SO4) is used as the acid catalyst. The reaction also produces sodium sulfate (Na2SO4) and water (H2O) as byproducts.

A balanced equation is a representation of a chemical reaction that shows the number of atoms of each element present in the reactants and products. A balanced equation follows the law of conservation of mass, which states that mass cannot be created or destroyed in a chemical reaction.

Learn more about chemical reaction here:

https://brainly.com/question/29762834

#SPJ4

Answer:

the molar mass of CoCl2•6H2O is 238.05 g/mol.

Explanation:

The molar mass of CoCl2•6H2O can be calculated by adding the atomic masses of each element in the compound.

Here's the calculation:

Cobalt (Co): 58.93 g/mol

Chlorine (Cl): 35.45 g/mol (2 atoms) = 70.9 g/mol

Hydrogen (H): 1.01 g/mol (12 atoms) = 12.12 g/mol

Oxygen (O): 16.00 g/mol (6 atoms) = 96.00 g/mol

Therefore, the molar mass of CoCl2•6H2O is:

58.93 + 70.9 + 12.12 + 96.00 = 238.05 g/mol

So, the molar mass of CoCl2•6H2O is 238.05 g/mol.

Resonance structures are employed when a single Lewis structure for a molecule is insufficient to completely capture the bonding that occurs between adjacent atoms in relation to empirical data on the actual bond lengths between those atoms.

A group of two or more Lewis structures known as resonance structures explain the electronic bonding of a single polyatomic species, including fractional bonds and fractional charges. Unable to be described by a single Lewis formula with an integral number of covalent bonds, delocalized electrons can be described using resonance structures.

The bonding in certain molecules or ions can occasionally defy description by a single Lewis structure, even when formal charges are taken into account. When the bonding cannot be encapsulated by a single Lewis formula, resonance is a means to describe delocalized electrons inside specific molecules or polyatomic ions. There are several contributing structures that depict a molecule or an ion with such delocalized electrons (also called resonance structures or canonical forms).

Learn more about Resonance structure here:

https://brainly.com/question/29547999

#SPJ4

When magnesium and nitrogen react to form an ionic compound Magnesium (Mg) becomes a cation and Nitrogen (N) becomes a anion.

Mg2+ - magnesium cation or magnesium ion N3- - nitride anion or nitrogen ion.

Magnesium (Mg) is a metal that tends to lose two electrons when it reacts, becoming a cation with a charge of +2.

Nitrogen (N) is a non-metal that tends to gain three electrons when it reacts, becoming an anion with a charge of -3.

When magnesium and nitrogen react, the magnesium cation (Mg2+) and the nitrogen anion (N3-) combine to form the ionic compound magnesium nitride (Mg3N2).

The symbols and names for the ions are:

Mg2+ - magnesium cation or magnesium ion

N3- - nitride anion or nitrogen ion.

Learn more about magnesium here:

https://brainly.com/question/1533548

#SPJ4

The number of moles of water that will be produced if 4 moles of hydrogen peroxide react is 4 moles.

Stoichiometry is the quantitative relationship between the reactants and products of a specific reaction or equation.

According to this question, hydrogen peroxide decomposes into water in the following equation:

2H₂O₂ → 2H₂O + O₂

Based on the above equation, 2 moles of hydrogen peroxide produces 2 moles of water.

This means that if 4 moles of hydrogen peroxide decomposes, 4 moles of water will also be produced.

Learn more about stoichiometry at: https://brainly.com/question/9743981

#SPJ1

The smallest part of an element that retains the chemical properties of the element is the atom.

An atom is the basic unit of matter, composed of protons, neutrons, and electrons. Each atom has a specific number of protons, which determines the element it represents. Atoms are incredibly small, with a diameter of about 10^-10 meters. However, they are crucial to understanding the behavior of matter.

The properties of atoms determine the physical and chemical properties of the materials they compose. For example, carbon atoms are a fundamental building block of organic molecules, which are essential to life. Oxygen atoms are necessary for respiration and the combustion of fuels. Understanding the structure of atoms and their interactions is essential to fields like chemistry, physics, and materials science.

Scientists have developed models to represent the behavior of atoms, such as the Bohr model and the quantum mechanical model. These models help us understand how atoms bond and react with each other, which is vital for developing new materials, drugs, and technologies. Overall, atoms are the building blocks of matter and play a critical role in shaping the world around us.

Learn more about atom

brainly.com/question/24053594

#SPJ4

Organic chemistry uses organolithium as a highly strong base. It produces an acid base reaction when combined with any acidic material extremely fast.

As a result of its rapidity and spontaneity, this reaction is practically irreversible.

Therefore, an irreversible arrow, in which most of the reaction is moving forward, best represents the relationship between the reactant and product ( i.e shifting towards product side)

Fluorides are often not utilised, and halide reactivity in these processes rises in the following order: Cl Br I. The second reaction's alkyl magnesium halides are known as Grignard Reagents after the French scientist Victor Grignard, who made the discovery and was awarded the Nobel Prize in 1912 for it. Similar reactions occur with the other metals indicated above, but Grignard and Alky Lithium Reagents are the most popular.

In the image below, the appropriate response is circled:

Learn more about Reaction here:

https://brainly.com/question/28984750

#SPJ4

By performing the following operation, the answer in scientific notation for 3.5 x 10⁷x 1.8×10[tex]^-3[/tex]×10 is 6.3×10⁵.

Scientific notation is defined as a way of expressing numbers which are too large or too small so that they can be easily written in decimal form. It can be referred to the scientific form or the scientific index form or even the standard form.

Base ten notation is used by scientists, engineers as it helps in simplification of arithmetic operations. It contains the significant figures which include all non-zero numbers , the zeroes between significant digits and zeroes which are needed to be significant.

Learn more about scientific notation,here:

https://brainly.com/question/13091583

#SPJ1

The ice particles have a lower average kinetic energy. Consequently, ice is distinct from the water vapour that develops as the water starts to boil.

Chemistry defines an object's kinetic energy as the amount of work it produces when in motion. Activities like walking, climbing, tossing, and dropping consume kinetic energy.

Kinetic energy is a type of energy that a moving object or particle has. When an item undergoes work—the transfer of energy—by being subjected to a net force, it accelerates and acquires kinetic energy. A moving object or particle's kinetic energy, which depends on both mass and speed, is one of its properties. Any combination of movements, including translation, rotation along an axis, and vibration, may be used as the kind of motion.

Learn more about Energy here:

https://brainly.com/question/26996435

#SPJ4

When water is heated in a closed container, such as a can, the pressure inside the container increases as the water vaporizes into steam.

The pressure inside the can builds up until it reaches a point where it is high enough to overcome the pressure of the surrounding air, at which point the steam is able to escape through a small opening.

This can cause the steam to expand rapidly and violently, which can lead to the can exploding or bursting open. the warm, moist air from your lungs condenses into visible water vapor when it comes into contact with the colder air outside.

In contrast, if the water in the can is heated too quickly or to a very high temperature, the pressure inside the can can become so high that the steam that escapes is very hot and under high pressure.  This is why it's important to be cautious when heating water in a closed container, and to avoid heating it too quickly or to too high a temperature.

To learn more about steam:

https://brainly.com/question/15447025

#SPJ4

An ionic bond is a stable bond created by the full transfer of the valence electron.

When an electron moves from one atom or molecule to another one of these chemical entities, this is known as electron transfer. When it comes to specific redox reactions involving the transfer of electrons, ET is a mechanistic description. ETRs are electrochemical processes.

ETRs are electrochemical processes. Transition metal complexes are frequently used in ET processes, which are relevant to respiration and photosynthesis. ET is a step in various commercial polymerization processes in organic chemistry. It serves as the basis for photoredox catalysis.

Learn more about   electron transfer here:

https://brainly.com/question/15271406

#SPJ1

Oxalic acid is a colorless, crystalline, organic compound belonging to the family of carboxylic acids. It is a strong dicarboxylic acid, with the molecular formula [tex]H2C2O4[/tex].

Given the volume of oxalic acid (h2c2o4) = 50mL

the concentration of oxalic acid = 0.080M

1. Calculate the moles of [tex]H2C2O4[/tex] needed for the solution:

Moles of [tex]H2C2O4[/tex] = (50.0 mL x 0.080 M) / 1000 mL = 0.004 moles

2. Calculate the mass of [tex]H2C2O4[/tex] needed for the solution:

Mass of [tex]H2C2O4[/tex] = 0.004 moles x 90.03 g/mol = 0.3609 g

3. Place 0.3609 g of [tex]H2C2O4[/tex] into a beaker and add 50.0 mL of distilled water.

4. Stir the solution to dissolve the [tex]H2C2O4[/tex].

5. If necessary, add more distilled water to make sure all of the oxalic acid has dissolved.

6. Measure the final volume of the solution and calculate the molarity:

Molarity = (0.004 moles x 1000 mL) / Final Volume (mL)

To learn more about oxalic acid click here https://brainly.com/question/10967292

#SPJ4

The capacity of a substance to bend light is described by its refractive index. Refraction is the bending of light as it travels through a medium having a varying refractive index.

Describes how much light is twisted when it travels through a substance, the refractive index is a fundamental feature of materials. It is described as the difference between the speed of light in a substance and the speed of light in a vacuum. This figure, which varies depending on the substance, expresses how much light the substance slows down .Optics, spectroscopy, and materials science are just a few of the fields in which the refractive index is crucial. The use of the refractive index to control the behaviour of light in the construction of lenses, prisms, and other optical components is crucial. The refractive index, in addition to being an important design element for optical devices.

Learn more about Refractive index here:

https://brainly.com/question/16060153

#SPJ4

In order to examine many details inside cells, an electron microscope can magnify objects by approximately 500,000 times. A variety of electron microscopes exist. Nanoparticles and atoms can be observed using a transmission electron microscope.

The quantum mechanical model, which draws on concepts from Schrödinger, Pauli, Heisenberg, and other thinkers, is the appropriate one for atoms. It takes a lot of various things into account. Theoretically sound, it is the most frequently accepted model. A more accurate depiction of the structure of atomic clusters, where surface atoms vibrate more intensely than inside atoms, has been revealed thanks to new technology created by physicists to examine atomic vibration in microscopic particles.

Learn more about electron microscope here:

https://brainly.com/question/507443

#SPJ4

F2 has a higher heat capacity due to its more intricate electrical structure and increased number of vibrational modes.

The amount of heat needed to raise the temperature of one mole of a substance by one degree Celsius at constant volume is known as the molar constant volume heat capacity (Cv). The atomic and molecular characteristics of the substance, such as its mass, structure, and vibrational modes, determine the value of Cv.

The energy needed to dissociate a bond between two atoms in a molecule is known as the bond dissociation energy (BDE). The link between two fluorine atoms can be broken with less energy because F2 has a lower bond dissociation energy than O2 and N2.

To know more about molar constant volume refer to:

brainly.com/question/4270867

#SPJ4

Answer: Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force. This tendency to resist changes in a state of motion is inertia.

Explanation:

Hoped that helped =)

The cutbank occurs on the outside curve of the river or stream because of the Coriolis effect. The Coriolis effect results from the rotation of the earth and causes the water to move faster on the outside curve of the bend in the river or stream.

The Coriolis effect is a phenomenon caused by the Earth's rotation. It occurs when objects moving in a straight line appear to veer off in a different direction than expected due to the rotation of the Earth. The effect causes winds and ocean currents to be deflected to the right in the Northern Hemisphere and to the left in the Southern Hemisphere. This effect is important in meteorology, as it affects the direction of air masses and the strength of hurricanes.

This faster-moving water has more energy and erodes away more of the riverbank or stream bank than the slower-moving water on the inside of the bend, creating the cutbank.

To learn more about Coriolis effect
https://brainly.com/question/23995366
#SPJ1

The amount of carbon tetrachloride that can be produced from reacting 190.1 grams of chlorine with excess methane is 159.8 grams.

What do you mean by chlorine?

Chlorine is basically a chemical element with symbol Cl and atomic number 17. It is a halogen, which means it is a highly reactive nonmetal. Chlorine is a yellow-green gas at room temperature and is highly soluble in water. It is most commonly used as a disinfectant and water purifier, but it has many other uses, including production of plastics, bleach, and synthetic fibers.

This is calculated using the equation:

mass of carbon tetrachloride = (mass of chlorine / molar mass of chlorine) x molar mass of carbon tetrachloride

= (190.1 / 70.906) x 153.82

= 159.8 grams

Hence, 159.8 grams of carbon tetrachloride can be produced from the reaction.

To know more about chlorine,

https://brainly.com/question/24218286

#SPJ1

The volume of sample at STP is 116.3L when a sample of oxygen gas occupies a volume of.200 l at 60.0 and 500 mmHg of pressure.

Given the initial volume of oxygen sample (V1) = 200L

The initial temperature (T1) = 60° = 60 + 273 = 333K

The initial pressure of sample (P1) = 500mmHg = 0.657895atm

The pressure at STP (P2) = 1 atm

The temperature at STP (T2) = 25 + 273= 298K

The volume at STP = V2

We know that from ideal gas law equation: PV = nRT such that at n is constant: P1V1/T1 = P2V2/T2. Then,

0.65 x 200/333 = 1 x V2/298

V2 = 116.3L

Hence the volume of sample at STP is = 116.3L

To learn more about oxygen click here https://brainly.com/question/2272415

#SPJ4

Benedict solution is aqua- blue in color. But as it is heated with high amount of reducing sugar its color changes to red.

Benedict solution is a complex mixture of pentahydrate of copper sulphate, sodium citrate and sodium carbonate. Carbohydrates, reducing sugars have reducing property. So when benedict solution is heated with reducing sugar the copper(II) ions is reduced to Cu(I) ions. From copper sulphate cupric oxide is formed, which is red in color.

If traces of reducing sugar is present, the color will turn to green. For moderate amounts the color will be yellow to orange. When high amount of reducing sugar is present more cupric oxide is formed and solution become red in color.

So in presence of high amount of reducing sugar, benedicts solution makes brick red precipitate.

For more information regarding Benedicts test for carbohydrates, kindly refer

https://brainly.com/question/25800056

#SPJ4