Declination -60 deg, Right Ascension 20 hrs could be the equatorial co-ordinates of a star that sets to the South of West when viewed from Thunder Bay.
When a star sets to the south of west when viewed from a specific location, it means that the star has a southern declination. Declination measures the angular distance of a celestial object from the celestial equator, with positive values indicating a northern position and negative values indicating a southern position. In this case, option C has a declination of -60 deg, indicating a southern position.
The right ascension value does not directly affect the direction in which a star sets, as it measures the angular distance of a celestial object along the celestial equator, starting from the vernal equinox. Therefore, the right ascension values given in the options are not relevant in determining the direction of the star's setting.
Hence, based on the given information, option C with Declination -60 deg could be the equatorial coordinates of a star that sets to the south of west when viewed from Thunder Bay.
To learn more about equatorial co-ordinates
https://brainly.com/question/2519208
#SPJ11
Complete Question:
Which Of The Following Could Be The Equatorial Coordinates Of A Star That Sets To The South Of West When Viewed From Thunder Bay A. Declination 60 Deg, Right Ascension 13 Hrs B. Declination 30 Deg, Right Ascension 6 Hrs C. Declination -60 Deg, Right Ascension 20 Hrs D. Declination -30 Deg, Right Ascension 1 Hr I Have Just Posted About 4 Questions And So
Which of the following could be the equatorial coordinates of a star that sets to the south of west when viewed from Thunder Bay
A. Declination 60 deg, Right Ascension 13 hrs
B. Declination 30 deg, Right Ascension 6 hrs
C. Declination -60 deg, Right Ascension 20 hrs
D. Declination -30 deg, Right Ascension 1 hr
Deep tap roots, waxy leaf coatings, and succulence are all adaptations to
O Moisture deficitis
O Midlatitude grassland
O Temperate rain forest
O Mediterranean
Deep tap roots, waxy leaf coatings, and succulence are adaptations to moisture deficits in Mediterranean environments.
Deep tap roots, waxy leaf coatings, and succulence are all adaptations that plants have developed to survive in Mediterranean environments characterized by moisture deficits. The Mediterranean climate is characterized by hot, dry summers and mild, wet winters. In such conditions, water availability becomes limited, and plants need to employ strategies to conserve and acquire water.
Deep tap roots are an adaptation that allows plants to access water deep within the soil. These roots can penetrate the ground to reach water sources that are not accessible to shallow-rooted plants. By tapping into deeper water reserves, plants can withstand extended periods of drought.
Waxy leaf coatings, also known as cuticles, are another adaptation to cope with moisture deficits. The waxy layer covering the leaves reduces water loss through evaporation. It acts as a barrier, preventing excessive transpiration and helping plants retain moisture during dry periods. The waxiness of the coating makes the leaf surface less permeable to water, reducing the risk of dehydration.
Succulence is a characteristic commonly found in plants adapted to Mediterranean environments. Succulent plants have specialized tissues that store water, such as fleshy stems or leaves. These water-storing tissues allow plants to retain water for extended periods and use it during dry spells. The stored water helps to sustain the plant's metabolic activities when external water sources are scarce.
Overall, deep tap roots, waxy leaf coatings, and succulence are all adaptations that enable plants to survive in Mediterranean environments by optimizing water acquisition and retention. These adaptations enhance the plant's ability to endure extended periods of moisture deficits, making them well-suited to thrive in such challenging climatic conditions.
Learn more about Mediterranean here:
https://brainly.com/question/20530435
#SPJ11
what would happen if you took your helmet off on mars
On Mars, removing your helmet would result in asphyxiation, freezing, and radiation exposure.
Mars has a very thin atmosphere that does not shield it from the sun's ultraviolet rays and does not have enough atmospheric pressure—only one-third that of Earth—to prevent severe decompression sickness.
The fourth and farthest terrestrial planet from the Sun is Mars. The soil on it contains finely-grained iron(III) oxide dust, which is why it is known as "the Red Planet" because of its reddish surface.
The astronaut would be wise to notice the boiling saliva and tears and immediately reseal the helmet because the atmosphere on Mars is nearly vacuum.
If that wasn't done, he or she would faint quickly, which may be just as well.
To know more about Mars,
brainly.com/question/31213699
#SPJ4
The North Pole is nearest the Sun during which of these events?
a Solar Eclipse
b December Solstice
c June Solstice
d March Equinox
e September Equinox
The North Pole is nearest the Sun during the June Solstice. So, the correct option is C
One of Earth's poles reaches its maximum tilt towards the Sun during the summer solstice. It takes place twice a year, once in the Northern and Southern hemispheres. The summer solstice, when the Sun is at its highest point in the sky, is the day with the longest period of daylight and shortest night of the year for that hemisphere.
The solstice marks the time of year when the Sun appears to be at either its highest or lowest point in the sky. Because of this, ancient astronomers began to refer to this day as one when the Sun appeared to stand still. The word solstice is derived from the Latin words sol, which means "Sun," and sistere, which means "To Stand Still".
To learn more about summer solstice:
https://brainly.com/question/4172420
#SPJ11
Which of the following was mentioned in the opening two-page spread of Chapter 1?
a. Oil beneath the Arctic National Wildlife Reserve
b. The scenery of Glacier National Park
c. Earthquakes along the San Andreas fault
d. Oil beneath the Gulf Coast of the United States
The first two pages of Chapter 1's opening spread mentioned Glacier National Park's scenery. The right answer is B.
The crust of the Earth resembles an apple's peel. In comparison to the other three layers, it is incredibly thin. Under the abysses, the oceanic crust is only approximately three to five long hauls (8 kilometres) deep, and under the continents, the international crust is only around 25 long hauls (32 kilometres) thick. The crust's temperature ranges from the ambient temperature at the surface to around 1600 degrees Fahrenheit (870 degrees Celsius) in the corridor where the crust is the deepest. At 350 degrees Fahrenheit, you may singe a loaf of bread in your roaster; at 1600 degrees F, gems start to melt.The Earth's crust is damaged.
To know more about Glacier National Park:
https://brainly.com/question/2114525
#SPJ4
Compare and contrast the melting of water and rock by matching each statement to the appropriate category below. Items (4 items) (Drag and drop into the appropriate area below) Categories
Melting of Water : The melting of water is the process of converting a solid into a liquid. Water has a relatively low melting point and can be frozen at temperatures as low as 0 °C (32 °F).
The melting of water requires added energy in the form of heat which causes the molecules to vibrate faster, which can eventually cause the solid to transition to a liquid state. At this point, the temperature will remain constant until all of the solid has been changed to liquid.
Melting of Rock : The melting of rock is much more complicated than the melting of water because rocks are solid mixtures of different minerals which contain different melting points. Generally, the heat needed is much higher than that of water; temperatures can reach up to 1000°C or more.
When rock is exposed to high temperatures, the minerals and crystals dissolve in a liquid form, forming liquid or partially melted rock. The molten material cools quickly, allowing for a new, solidified rock to form.
know more about melting point here
https://brainly.com/question/20551307#
#SPJ11
most of the extrasolar planets found so far were detected by
The majority of extrasolar planets discovered thus far have been found by observing the star's Doppler changes as the planet swings around in orbit around it.
Exoplanets are extremely difficult to observe directly. Consider the images of Pluto that were captured from Earth. The best images we have of Pluto depict it as a tiny, round object. It's challenging to capture something in high-quality on camera when it's so far away.
On average, Pluto orbits the Sun at a distance of around 40 times that of Earth. That is fairly far. Consider a planet that is 4 million times farther from the Sun than Earth.
You can appreciate how challenging it is for us to capture a photo of anything that far away. Planets are extremely difficult to notice not only because they are so far away, but also because they are so dark in comparison to their parent stars.
To know more about extrasolar planet:
https://brainly.com/question/28167962
#SPJ4
Correct question:
Most of the extrasolar planets found so far were detected by ____.
people from what geographical area are mentioned in hebrews?
Hebrews mentions various geographical areas such as Egypt, Canaan, Babylon, and Mount Sinai, highlighting the historical context of the Israelites' deliverance, journey, captivity, and spiritual symbolism.
In the book of Hebrews, several geographical areas are mentioned in relation to the people and events discussed. Hebrews is a New Testament epistle written in the first century CE, addressing a Jewish-Christian audience.
While it primarily focuses on theological and spiritual matters, it does mention various geographical locations.
One significant geographical area mentioned in Hebrews is Egypt. The author references the Israelites' deliverance from slavery in Egypt and their subsequent journey through the wilderness to the Promised Land.
The author also mentions Mount Sinai, where Moses received the Law from God.
The book also refers to the land of Canaan, which was the promised land for the Israelites. It speaks of the faith of the patriarchs, such as Abraham, who left his homeland in Mesopotamia to settle in Canaan.
Other places mentioned include Babylon, where some Jews were taken into captivity, and Mount Zion, which symbolizes the heavenly Jerusalem and the spiritual inheritance of believers.
While Hebrews primarily focuses on spiritual and theological themes rather than extensive geographical descriptions, it draws upon these locations to emphasize the historical and religious context of the Jewish people and their faith.
To know more about Hebrews refer here:
https://brainly.com/question/11849150#
#SPJ11
Which service provides automatic failover between multiple endpoints in support of a geographic DR strategy?
A. Amazon VPC
B. AWS Direct Connect
C. Elastic Load Balancing
D. Amazon Route 53
The service that provides automatic failover between multiple endpoints in support of a geographic DR (Disaster Recovery) strategy is Amazon Route 53. The correct option is D.
Amazon Route 53 is a scalable and highly available Domain Name System (DNS) web service provided by Amazon Web Services (AWS). It offers advanced DNS features, including health checks and DNS failover, which enable automatic failover between multiple endpoints in different geographic locations.
With Route 53's failover feature, you can set up health checks on your endpoints and configure the DNS routing policies to automatically route traffic to healthy endpoints and redirect it away from unhealthy ones. This capability ensures that in the event of a failure or disruption in one location, traffic is seamlessly redirected to alternate endpoints in a different location, supporting a geographic Disaster Recovery strategy.
The correct option is D.
To know more about geographic , click here.
https://brainly.com/question/31532748
#SPJ4
A piece of land surrounded by water on three sides is called _____.
A
peninsula
B
isthumas
C
Island
D
continent
Answer:
The correct answer is peninsula (A).
Earth-sized sediment on a hillside can slowly move over many years down slope due to expansion and contraction of soil moisture and it freezes and thaws; this type of mass movement is called... creep pexfoliation landslide parth flow debris slide
The type of mass movement described, where earth-sized sediment slowly moves down a hillside due to soil moisture expansion and contraction, freezing and thawing, is called creep. Therefore, option A is correct.
Creep, in the context of mass movement, refers to the slow and gradual downslope movement of sediment or soil on a hillside. It occurs as a result of various factors, including the expansion and contraction of soil moisture and the repeated freezing and thawing of the ground.
Over time, these processes exert pressure on the sediment, causing it to move downslope in a creeping manner. Creep is typically characterized by imperceptible movement, often measured in millimeters or centimeters per year. It is an important geologic process that contributes to the reshaping of landscapes and the formation of landforms.
Learn more about mass movement here:
https://brainly.com/question/1698616
#SPJ4
Most probably, your complete question is this:
Earth-sized sediment on a hillside can slowly move over many years down slope due to expansion and contraction of soil moisture and it freezes and thaws; this type of mass movement is called.......
A) creep
B) exfoliation
C) landslide
D) earthflow
E) debris slide.
Numerous studies have shown that particulate air pollution (fine dust) tends to be carried towards both the North and South poles by winds. There, it falls back to the ground, accumulating on the ice and snow and causing the ice surface to become darker. As a result we might expect that Select one: a. the Earth warms up a bit. b. polar bears tend to be easier to hunt. c. the planet gets a little cooler. d. the poles get bigger as more ice forms. Which of the following conclusions is supported by ice cores extracted from the Antarctic ice sheet? Select one: a. High atmospheric carbon dioxide has coincided with global warming in the past. b. High atmospheric carbon dioxide has caused global warming in the past. c. It is much warmer now than it has ever been before. d. Average sea levels were higher when atmospheric carbon dioxide was high in the past.
The accumulation of particulate air pollution on ice and snow in polar regions leads to a darker ice surface, and as a result, we might expect that the Earth warms up a bit.
Ice cores extracted from the Antarctic ice sheet support the conclusion that high atmospheric carbon dioxide has coincided with global warming in the past.
When particulate air pollution, such as fine dust, accumulates on ice and snow in polar regions, it darkens the surface of the ice. This darker surface absorbs more sunlight, leading to increased heating and a warming effect. Therefore, we can expect that the Earth warms up to some extent as a result of this phenomenon.
Ice cores extracted from the Antarctic ice sheet provide valuable information about past climate conditions. By analyzing the composition and properties of the ice cores, scientists can reconstruct past atmospheric conditions.
These ice core records support the conclusion that high atmospheric carbon dioxide levels have coincided with global warming in the past. The analysis of ice cores reveals historical patterns of carbon dioxide levels and temperature changes, indicating a correlation between elevated carbon dioxide concentrations and global warming trends.
It is important to note that the conclusions supported by ice cores do not imply that high atmospheric carbon dioxide has caused global warming in every instance. However, the data from ice cores demonstrate a linkage between past periods of elevated carbon dioxide and periods of global warming.
Additionally, ice core records can provide insights into past sea levels, but they do not directly address the claim about current temperature comparisons.
In summary, the accumulation of particulate air pollution on ice and snow in polar regions leads to a warming effect on the Earth. Ice cores extracted from the Antarctic ice sheet support the conclusion that high atmospheric carbon dioxide has coincided with global warming in the past, based on the correlation observed in the historical records obtained from these ice cores.
Learn more about global warming here :
https://brainly.com/question/30661109
#SPJ11
Which of the following statements is TRUE regarding map projections?
All maps, regardless of the projection used, have some degree of distortion
The statement "All maps, regardless of the projection used, have some degree of distortion" is true.
Map projections are methods used to represent the three-dimensional surface of the Earth onto a two-dimensional map. Since the Earth's surface is curved while maps are flat, it is impossible to accurately represent the entire Earth without some form of distortion.
Different map projections aim to minimize certain types of distortion, such as shape distortion, area distortion, distance distortion, or direction distortion.
However, no projection can eliminate all types of distortion simultaneously. When choosing a map projection, cartographers must prioritize which aspects to preserve accurately based on the purpose of the map.
For example, the Mercator projection preserves angles and shapes well but distorts areas near the poles. The Peters projection aims to preserve accurate area representation but distorts shapes. The Robinson projection attempts to balance overall accuracy but compromises in several aspects.
In summary, due to the inherent challenge of representing a curved surface on a flat map, all maps will inevitably have some degree of distortion, even though different map projections may minimize certain types of distortion for specific purposes.
To learn more about map projection, refer to the link:
https://brainly.com/question/3703881
#SPJ4
Most wind eroded particles are transported by which of the following processes. saltation suspension surface creep they are all equal
Most wind-eroded particles are transported by the process of suspension.
When wind erodes particles from the Earth's surface, it can transport them through various mechanisms. However, the primary process responsible for the transportation of wind-eroded particles is suspension.
Suspension occurs when small and lightweight particles, such as silt and clay, become entrained in the moving air and remain suspended within it. These particles are lifted off the ground by the force of the wind and can travel significant distances. Suspension allows for the widespread and long-distance transport of fine-grained particles.
While other processes like saltation (when larger particles are lifted and bounce along the ground) and surface creep (when larger particles roll or slide along the surface) also play a role in the transport of wind-eroded particles, they are generally more significant for larger and heavier particles. Suspension, on the other hand, is the primary mechanism for the transport of fine-grained particles that make up the majority of wind-eroded material.
Among the given options, the process of suspension is the most significant for the transportation of wind-eroded particles. While saltation, surface creep, and suspension all contribute to particle movement, suspension is particularly important for the widespread transport of fine-grained particles in the air.
To know more about mechanisms, visit
https://brainly.com/question/33132056
#SPJ11
Name: Course: (a) What diffecence do you notice in the shapes of the valleys pictured in Figure 13 ig7 In particular, compare the overall shapes of the vallers pictured and the characteritici of each
1. V-shaped valleys: Some valleys in Figure 13 have a V-shape. These valleys are characterized by steep, straight sides that converge towards the bottom. They are typically formed by rivers or streams eroding the land over time. V-shaped valleys often have a narrow floor and can be found in mountainous regions.
2. U-shaped valleys: Other valleys in Figure 13 have a U-shape. These valleys have a wide, rounded bottom and gently sloping sides. They are usually formed by glaciers. As glaciers move and erode the land, they can carve out U-shaped valleys. U-shaped valleys can be found in areas that have experienced past glaciation.
3. Flat-bottomed valleys: There may also be valleys in Figure 13 with flat bottoms. These valleys have a relatively even and flat floor. They can be formed by various geological processes, such as tectonic activity or erosion. Flat-bottomed valleys can have different shapes and characteristics depending on the specific geologic forces at play in their formation.
Learn more about V-shaped valleys
https://brainly.com/question/32675186
#SPJ11
14. Are intense rainfall events likely to become more frequent or less frequent under climate change? Which feedback mechanism provides at least partial support for this outcome? ( 5 points)
Intense rainfall events are likely to become more frequent under climate change. One feedback mechanism that supports this outcome is the increased water vapor capacity of a warmer atmosphere.
Warmer air can hold more moisture, leading to more intense rainfall when it condenses. This is supported by scientific research and observations. Intense rainfall events are likely to become more frequent under climate change. This is supported by the positive feedback mechanism known as the Clausius-Clapeyron relationship.
According to this relationship, for every 1-degree Celsius increase in temperature, the moisture-holding capacity of the atmosphere increases by about 7%. As global temperatures rise, the atmosphere can hold more water vapor, leading to increased atmospheric moisture and the potential for more intense rainfall events.
This positive feedback mechanism contributes to the projection of more frequent and intense rainfall events in a warmer climate.
To know more about Water visit.
https://brainly.com/question/28465561
#SPJ11
Need help with the following question the answer you have listed are incorrect it does not state which of the four hemispheric pressures it is it only states high or low not an actual region area. Please give new response not copy and past old answers which are incorrect.
The predominant pressure systems found in the Pacific have an impact on California’s weather systems. The low-pressure region over the Aleutian Islands is referred to as the ‘Aleutian Low’ while the high pressure over Hawaii is referred to as the ‘Hawaiian High.’
A. Which of the four hemispheric pressure areas do you see offshore in the Pacific Ocean near California on the July map?
B. On the January map, which of the four hemispheric pressure areas is located near the Aleutian Islands?
A. On the July map, the hemispheric pressure area that you would see offshore in the Pacific Ocean near California is the 'Hawaiian High.'
B. On the January map, the hemispheric pressure area that is located near the Aleutian Islands is the 'Aleutian Low.'
A. On the July map, the presence of the 'Hawaiian High' pressure area offshore in the Pacific Ocean near California is due to the atmospheric conditions during that season. In July, the Northern Hemisphere experiences warmer temperatures, which leads to the formation of a high-pressure system centered around the Hawaiian region. This high-pressure system, also known as the 'Hawaiian High,' is characterized by descending air, clear skies, and relatively stable weather conditions. Its location near California influences the weather patterns in the region, often bringing dry and warm conditions to the coastal areas.
B. On the January map, the presence of the 'Aleutian Low' pressure area near the Aleutian Islands is a result of the atmospheric conditions during the winter season. In January, the Northern Hemisphere experiences colder temperatures, leading to the formation of a low-pressure system around the Aleutian Islands in the North Pacific. The 'Aleutian Low' is characterized by ascending air, cloud formation, and stormy weather conditions. Its location near the Aleutian Islands influences the weather patterns in the region, often bringing unsettled and stormy conditions to the area.
To learn more about Aleutian Low visit:
https://brainly.com/question/31225716
#SPJ11
A community was concerned about a local spill and a lab has recently determined that radioactive strontium (90Sr) is in their groundwater that is tapped from three different wells, W1, W2 and W3. A Geologist has determined that the groundwater in W1 is dominated by sandstone that is almost pure quartz; W3 is also sourced in sandstone, but the sandstones consists of an equal mixture of quartz (where Si is in its usual coordination) and alkali feldspar (where Na and K are in 8-fold, or VIII coordination and Al substitutes for Si, again in its usual coordination). A third well, W2, is sourced in limestone, which consists mostly of calcite (where C is in 3-foled or III coordination and the Ca is in 6-fold or VI coordination). The community can treat only a limited amount of water; which well or wells, would you expect to contain the least amount of 90Sr, or will they all be equally contaminated. Also, community members are interested in how long the levels of radioactivity in their groundwater will be elevated over the pre-spill levels.
Two approaches: (a) It depends upon what atom you are substituting Sr for. For example, if you want to put Sr in place of Si, then Sr would be in IV coordination. If you want to put Sr in place of Na in feldspar it would have VIII coordination, if you want to put Sr into the place of Al, it would have VI coordination. But in all these cases it will always have the same charge, which you can determine from its position in the periodic table of elements. (b) not all of those coordination numbers are equally likely. Use radius ratios (Sr and O) to differentiate which CN is best.
The well that is sourced in limestone (W2) is expected to contain the least amount of radioactive strontium (90Sr).
To determine which well would contain the least amount of 90Sr, we need to consider the chemical composition and coordination numbers of the minerals present in each well. Radioactive strontium (90Sr) can substitute for different elements in minerals, depending on the coordination number and charge compatibility.
In well W1, the groundwater is dominated by sandstone consisting of almost pure quartz. Since quartz consists of silicon (Si) in its usual coordination, substituting strontium (Sr) for silicon would result in Sr being in IV coordination. However, the radius ratio between Sr and Si is relatively large, making it less favorable for Sr to substitute Si in quartz. Therefore, we can expect that W1 will have a relatively lower amount of 90Sr.
In well W3, the sandstone consists of an equal mixture of quartz and alkali feldspar. Alkali feldspar contains sodium (Na) and potassium (K) in VIII coordination, with aluminum (Al) substituting for silicon (Si). If we consider substituting Sr for Na in alkali feldspar, Sr would also have VIII coordination. However, the radius ratio between Sr and Na is smaller than that of Sr and Si, making it more favorable for Sr to substitute Na in feldspar compared to quartz. Therefore, W3 may have a higher amount of 90Sr compared to W1.
In well W2, the groundwater is sourced in limestone, which mainly consists of calcite. Calcite contains carbon (C) in III coordination and calcium (Ca) in VI coordination. If we consider substituting Sr for Ca in calcite, Sr would also have VI coordination. The radius ratio between Sr and Ca is relatively small, making it more favorable for Sr to substitute Ca in calcite compared to Si in quartz and Na in feldspar. Therefore, W2 is expected to have the least amount of 90Sr among the three wells.
Based on the chemical compositions and coordination numbers of the minerals present in each well, it is expected that the well sourced in limestone (W2) will contain the least amount of radioactive strontium (90Sr). Wells W1 and W3 may have higher levels of 90Sr, with W3 potentially having a higher contamination level than W1 due to the favorable substitution of Sr for Na in alkali feldspar. However, W2, sourced in limestone, is likely to be the least contaminated well in terms of 90Sr.
To know more about radioactive ,visit;
https://brainly.com/question/28489379
#SPJ11
Calculate the average annual discharge (in m3/s) from a 20 km2 watershed that received a total annual precipitation of 900 mm, with 40% of the total precipitation lost to evaporation and infiltration. Assume there was no groundwater inflow and no net change in soil moisture.
The average annual discharge from the 20 km2 watershed, after accounting for a 40% loss to evaporation and infiltration, is approximately 0.0068 m3/s.
To calculate the average annual discharge, we need to determine the amount of water that remains as runoff after accounting for evaporation and infiltration.
Given:
Total annual precipitation = 900 mm
Watershed area = 20 km2
Loss due to evaporation and infiltration = 40% of total precipitation
First, let's convert the watershed area from km2 to m2:
20 km2 = 20,000,000 m2
Next, we calculate the total volume of precipitation that falls on the watershed:
Total precipitation = Total annual precipitation × Watershed area
= 900 mm × 20,000,000 m2
= 18,000,000,000 mm3
Since 1 mm3 is equivalent to 1×10^(-9) m3, we can convert the total volume of precipitation to cubic meters:
Total precipitation = 18,000,000,000 mm3 × 1×10^(-9) m3/mm3
= 18,000 m3
Next, we need to determine the amount of water lost to evaporation and infiltration:
Loss due to evaporation and infiltration = 40% of total precipitation
= 0.4 × 18,000 m3
= 7,200 m3
Finally, to calculate the average annual discharge, we subtract the loss due to evaporation and infiltration from the total precipitation and divide it by the number of seconds in a year:
Average annual discharge = (Total precipitation - Loss due to evaporation and infiltration) / (Number of seconds in a year)
Number of seconds in a year = 365 days/year × 24 hours/day × 60 minutes/hour × 60 seconds/minute
= 31,536,000 seconds
Average annual discharge = (18,000 m3 - 7,200 m3) / 31,536,000 s
≈ 0.0068 m3/s
The average annual discharge from the 20 km2 watershed, after accounting for a 40% loss to evaporation and infiltration, is approximately 0.0068 m3/s.
To know more about infiltration ,visit;
https://brainly.com/question/32907231
#SPJ11
Which of the following is NOT a type of estuary?
A. Shallow Bay Estuary
B. Bar-Built Estuary
C. Fjord
D. Drowned River Valley
E. Tectonic Estuary
Most of the primary production Biomass is consumed as ____ in an Estuary System
A. Detritus
B. Kelp
C. Sea Grasses
D. Mangrove Leaves
E. Spartina Grasses
Tectonic Estuary is NOT a type of estuary The correct answer is E.
Most of the primary production biomass in an estuary system is consumed as detritus in an Estuary System. The correct option is A.
A tectonic estuary is not a recognized type of estuary. The other options provided - A. Shallow Bay Estuary, B. Bar-Built Estuary, C. Fjord, and D. Drowned River Valley - are all valid types of estuaries.
A shallow bay estuary is characterized by its wide, shallow basin with limited mixing of freshwater and seawater. This type of estuary is often found in low-lying coastal areas.
A bar-built estuary is formed by the accumulation of sand or sediment that creates a barrier between the ocean and a coastal bay or lagoon. These estuaries are common along sandy coasts.
A fjord is a deep, narrow, and elongated estuary with steep sides or cliffs. Fjords are typically formed by glacial activity and are found in areas with high mountain ranges.
A drowned river valley is formed when sea level rises and fills a previously existing river valley. This type of estuary retains the basic shape and characteristics of the original river valley. The correct answer is E.
Detritus refers to dead organic matter, such as decaying plants and animals, and it serves as an important food source for many organisms in estuaries.
Estuaries are highly productive ecosystems, meaning they support a large amount of plant and animal life. Primary production in estuaries is mainly driven by the growth of microscopic plants called phytoplankton. These plants use sunlight and nutrients to produce organic matter through photosynthesis.
The phytoplankton, along with other types of algae and aquatic plants, form the base of the food chain in estuaries. When these primary producers die or are consumed by grazers, their organic matter becomes detritus. Detritus is then broken down by decomposers like bacteria and fungi, and the resulting nutrients are recycled back into the estuarine ecosystem.
Detritus plays a crucial role in the estuarine food web by providing energy and nutrients for detritivores, which are organisms that feed on dead organic matter. Detritivores can include filter-feeding bivalves, worms, and small crustaceans. The correct option is A.
In conclusion, detritus is the primary form in which the biomass produced by primary producers is consumed in estuaries. This detritus forms the foundation of the estuarine food web and supports the diverse array of organisms that inhabit these ecosystems.
To learn more about Estuary click here:
https://brainly.com/question/24264479#
#SPJ11
very slow movement of slope material downhill is known as
The very slow movement of slope material downhill is known as Creep.
In geology, creep is the gradual downslope movement of particle that happens on any slope covered with loose, worn material. Even soil covered with close-knit sod slides downslope, as seen by the gradual but continuous tilting of trees, poles, tombstones, and other things put into the ground on slopes.
Apart from direct gravitational factors, frost heaving is the most major mechanism causing creep. Surface particles are driven up and out perpendicular to the slope as interstitial water freezes; when allowed down by melting in order these particles are dragged directly downward by gravity and are progressively shifted downslope. Other mechanisms at work include the wedging effect of root development and the wetting and drying of soil layers.
Learn more about Creep here:
https://brainly.com/question/30389236
#SPJ4
The Mid-Atlantic Ridge began breaking up Pangaea around 180 million years ago, creating the Atlantic Ocean and it has been spreading steadily ever since, calculate the FULL seafloor spreading rate at: a.) the Ascension Fracture Zone ( 2320 km away from Brazil). Show your work and include units. b.) Freetown (8 8
∘
N latitude) ( 2290 km away from the Mid-Atlantic Ridge). Show your work and include units. c.) Are the spreading rates that you calculated above slow, intermediate, or fast? (See the Background section).
The full seafloor spreading rates at the Ascension Fracture Zone and Freetown are approximately 20 cm/year and 16 cm/year, respectively. These rates suggest a relatively fast spreading process in the Atlantic Ocean.
The full seafloor spreading rates at the Ascension Fracture Zone (2320 km away from Brazil) and Freetown (8°N latitude, 2290 km away from the Mid-Atlantic Ridge) are calculated to determine whether they are slow, intermediate, or fast.
a) To calculate the full seafloor spreading rate at the Ascension Fracture Zone (2320 km away from Brazil), we divide the distance by the time. Assuming the spreading has been steady since the breakup of Pangaea 180 million years ago, we can use the formula: Rate = Distance / Time.
The average spreading rate of the Mid-Atlantic Ridge is approximately 2.5 cm per year. Therefore, the calculation for the Ascension Fracture Zone is as follows:
Rate = Distance / Time = 2320 km / (180 million years × 2.5 cm/year)
Converting km to cm: 2320 km × 100,000 cm/km = 232,000,000 cm
Rate = 232,000,000 cm / (180 million years × 2.5 cm/year)
Simplifying: Rate ≈ 20 cm/year
b) Similarly, for Freetown (8°N latitude, 2290 km away from the Mid-Atlantic Ridge), we perform the same calculation:
Rate = Distance / Time = 2290 km / (180 million years × 2.5 cm/year)
Converting km to cm: 2290 km × 100,000 cm/km = 229,000,000 cm
Rate = 229,000,000 cm / (180 million years × 2.5 cm/year)
Simplifying: Rate ≈ 16 cm/year
c) Interpreting the spreading rates: Based on the calculated spreading rates, both at the Ascension Fracture Zone and Freetown, the seafloor spreading rates can be considered relatively fast.
The spreading rate at the Ascension Fracture Zone is approximately 20 cm/year, while at Freetown, it is around 16 cm/year. These rates indicate an active spreading process in the Atlantic Ocean, where new crust is continuously being formed and pushing the existing plates apart.
In summary, the full seafloor spreading rates at the Ascension Fracture Zone and Freetown are approximately 20 cm/year and 16 cm/year, respectively. These rates suggest a relatively fast spreading process in the Atlantic Ocean, supporting the ongoing creation of new crust and the widening of the ocean basin.
Learn more about Atlantic Ocean here :
https://brainly.com/question/21441555
#SPJ11
Reread this passage from the previous section.
"Climate change is a hotly debated issue with varying viewpoints. Some argue that the earth’s temperature is rising rapidly and that this is largely due to human activity (Cox et al. 2000; Earth First 2005; Gore 2006). Others argue that humans have little effect on climate change (Wall Street Journal; The Heritage Foundation). Still others argue that scientists are still uncertain about climate change (CBS News 2008). Based on these viewpoints, we can conclude that the role of humans on climate change is still unknown."
Recall that we concluded this excerpt does a good job of summarizing the main points. However, the paragraph could be improved by reminding the reader of their hypothesis, and providing a clearer "so what?"
In the space provided, re-write this conclusion (in 3-5 sentences) to be a more effective. Keep in mind what you’ve learned so far in this tutorial.
Based on the varying viewpoints presented, it is evident that the issue of climate change is subject to debate.
While some argue that human activity is a significant contributor to rising global temperatures, others believe that human influence is minimal. Additionally, there are those who highlight the uncertainty among scientists regarding climate change.
However, it is important to note that this diversity of opinions does not conclusively determine the role of humans in climate change. Further research and examination of scientific evidence are necessary to gain a comprehensive understanding of the subject and its implications for the future.
To know more about "Climate change here
https://brainly.com/question/1789619
#SPJ4
The Greek alphabet is used to show what about stars in a constellation? Select one:
A. The brightness of the stars in a constellation is listed in order of the Greek alphabet, with alpha being the brightest, beta being the second brightest, and so on.
B. The closeness of the stars in a constellation is listed in order of the Greek alphabet, with alpha being the closest, beta being the second closest, and so on.
C. The redness of the stars in a constellation is listed in order of the Greek alphabet, with alpha being the reddest, beta being the second reddest, and so on.
D. The blueness of the stars in a constellation is listed in order of the Greek alphabet, with alpha being the bluest, beta being the second bluest, and so on.
The size of the dot representing a star on the SC001 and SC002 charts represents Select one:
A. The closeness of the star, with the larger the dot representing the closer the star.
B. The brightness of the star, with the larger the dot representing the brighter the star.
C. The blueness of the star, with the larger the dot representing the bluer the star.
D. The mass of the star, with the larger the dot representing the more massive the star.
The stars in the night sky change in what way over the course of a year? Select one:
A. Some parts of the sky change, while others do not. For instance, the constellations of the zodiac change, but the constellations immediately around the zodiac do not.
B. The sky is static. Only the moon changes phases over the course of the year.
C. The stars gradually shift position over the course of the year with the constellations high in the sky at midnight during the summer not visible at midnight during the winter.
D. Some constellations move around the sky counterclockwise and some constellations move clockwise. There is no way to tell which way they will move.
A. The Greek alphabet is used to show the brightness of the stars in a constellation, with alpha being the brightest, beta being the second brightest, and so on.
The Greek alphabet is used to show the brightness of stars in a constellation. This means that the stars in a constellation are labeled with Greek letters, such as alpha, beta, gamma, etc. The brightest star in a constellation is assigned the letter alpha, the second brightest star is assigned the letter beta, and so on. This helps astronomers and stargazers identify and differentiate the stars within a constellation based on their relative brightness. For example, if a constellation has three stars labeled alpha, beta, and gamma, alpha would be the brightest, followed by beta and then gamma.
On the SC001 and SC002 charts, the size of the dot representing a star represents its brightness. The larger the dot, the brighter the star. This allows astronomers and observers to easily identify and compare the brightness of stars in the night sky. For instance, if there are two stars on the chart, one with a small dot and one with a large dot, the star with the large dot would be brighter than the one with the small dot.
In conclusion, the Greek alphabet is used to show the brightness of stars in a constellation, with alpha being the brightest. On the charts, the size of the dot representing a star indicates its brightness, with a larger dot representing a brighter star. These methods help astronomers and stargazers identify and compare the brightness of stars within constellations and in the night sky.
To know more about the constellation visit:
https://brainly.com/question/32964301
#SPJ11
Use this image to answer the following questions. - Select the factors below that likely account for why the surface current is different from the prevailing winds. - There may be more than one correc
1. Ekman Transport: The Coriolis effect causes the surface wind to deflect to the right in the Northern Hemisphere and to the left in the Southern Hemisphere. This deflection leads to a net transport of water at the surface, creating a surface current that is not directly aligned with the prevailing winds.
2. Oceanic Topography: Underwater features such as seamounts, ridges, and canyons can affect the direction and intensity of surface currents. These features can redirect and alter the flow of water, causing the surface current to deviate from the direction of the prevailing winds.
3. Coastal Geography: When surface currents encounter coastlines, they can be influenced by the shape and orientation of the coastline. Coastlines that are concave or have irregular shapes can cause the surface current to change direction or split into multiple currents.
4. Atmospheric Pressure Systems: Variations in atmospheric pressure can influence the strength and direction of winds. High-pressure systems can create areas of sinking air, which can result in weaker winds and less influence on surface currents. Conversely, low-pressure systems can generate stronger winds and exert a greater influence on surface currents.
5. Upwelling and Downwelling: Upwelling occurs when deep, nutrient-rich water rises to the surface, while downwelling happens when surface water sinks. These vertical movements can disrupt the direct correlation between the surface current and the prevailing winds.
Learn more about Coriolis effect
https://brainly.com/question/31284831
#SPJ11
how many degrees does the earth rotate in 24 hours
The Earth rotates 360 degrees in 24 hours. In this way the cycle of morning and night takes place where the earth rotates in its own axis.
This indicates that it makes a complete rotation around its axis in a day. The cycle of day and night is brought about by the rotation of the Earth, which takes a day to complete. The Sun appears to rise in the east and set in the west as a result of this rotational speed.
The Earth's rotation rate varies slightly throughout the year due to things like the tilt of the axis and gravitational interactions with other celestial bodies. However it typically takes 24 hours for it to complete a 360 degree rotation.
Learn more about Earth at:
brainly.com/question/12041467
#SPJ4
"Climate forecast models must include interactions between the
atmosphere and other components of Earth's climate system as well
as influences resulting from increases in greenhouse gas
concentrations." T/F
The given statement "Climate forecast models must include interactions between the atmosphere " is True because Climate forecast models must take into account all relevant factors that influence the climate.
It includes interactions between the atmosphere and other components of Earth's climate system, such as the ocean or the biosphere. It is also important to consider the potential impacts of human activities, such as increased emissions of greenhouse gases.
Climate forecasts must accurately reflect data from different sources and include interactions between different components of the Earth's climate system. Only then can accurate forecasts be generated so that policy makers, businesses, and individuals can make informed decisions for the future.
To know more about Climate forecast models, click here:
https://brainly.com/question/33076615
#SPJ4
Is there a nexus between environmental management standards and cleaner production? Give cogent reasons in support of your answer.
Yes, there is a nexus between environmental management standards and cleaner production. Environmental management standards provide a framework for activities to be done in an environmentally responsible way and serve as a baseline for assessing impacts of particular activities (such as industrial production) on the environment.
Cleaner production, on the other hand, involves the redesign of production processes and practices so that they use fewer resources, generate less waste and emit less hazardous pollutants. This redesign is usually done with reference to the environmental management standards that are applicable to the relevant sector.
For example, organizations may reduce their environmental impact by improving or changing their production processes and introducing cleaner production practices, while also making sure to adhear to the legal and regulatory standards set by relevant bodies.
know more about hazardous pollutants here
https://brainly.com/question/31039905#
#SPJ11
1. Provide examples of how land use affects stormwater runoff
Land use practices have a significant impact on stormwater runoff. Examples include urbanization, deforestation, agricultural practices, and impervious surfaces. These activities can increase the volume and velocity of stormwater runoff, leading to issues such as flooding, erosion, and water pollution.
Land use practices have a direct influence on the amount and behavior of stormwater runoff. Urbanization, for instance, involves the construction of buildings, roads, and other infrastructure, which often results in the removal of natural vegetation and the creation of impervious surfaces such as pavement and concrete. This alteration of the landscape reduces the ability of the land to absorb and infiltrate water, causing increased runoff. Urban areas typically experience higher volumes and faster rates of stormwater runoff compared to natural or rural areas.
Deforestation is another land use activity that affects stormwater runoff. When trees and vegetation are removed, the land loses its ability to intercept rainfall, leading to increased runoff. Forests act as natural sponges, absorbing water and slowing down its flow. Without the tree canopy and root systems, rainwater runs off the land more rapidly, potentially causing erosion and contributing to downstream flooding.
Agricultural practices can also impact stormwater runoff. Intensive farming methods, such as clearing land for crop cultivation and the use of excessive fertilizers and pesticides, can lead to soil erosion and water pollution. When soil becomes compacted or lacks vegetative cover, it becomes more susceptible to erosion by rainwater, resulting in increased sedimentation and nutrient runoff into nearby water bodies.
Furthermore, the presence of impervious surfaces like roads, parking lots, and rooftops can exacerbate stormwater runoff issues. These surfaces prevent water from infiltrating into the soil, leading to increased runoff volumes and faster flow rates. The runoff can pick up pollutants such as oils, chemicals, and litter, which are then carried into water bodies, degrading water quality.
Overall, land use practices greatly influence stormwater runoff patterns. By understanding the impact of different land uses, strategies can be developed to mitigate the adverse effects and implement sustainable stormwater management practices, such as green infrastructure and land conservation measures.
To know more about stormwater runoff visit: brainly.com/question/31641342
#SPJ11
Other than radiation, what physical process (or processes) are
responsible for the vertical heat transport on the observed Earth
between the surface and troposphere?
Under the influence of radi
Vertical heat transport on Earth is largely accomplished through physical processes, in addition to radiation. These processes include convection, atmospheric circulation, and evaporation and condensation.
Convection occurs when warmer air rises through cooler air due to differences in temperature and/or density. Hot air at the surface is heated by the sun, and due to its lower density, rises through the atmosphere. This warmer, lighter air is replaced by cooler, denser air, completing the cycle.
Atmospheric circulation conveys heat via wind currents. This process occurs both horizontally and vertically: horizontal winds transport heat from the equator to the poles, while convection causes the wind to rise in the troposphere, transferring heat to higher atmospheric layers.
Finally, evaporation and condensation play a role in vertical heat transport. When water vapor evaporates from the surface, it carries heat energy with it. This energy is released back to the atmosphere when the vapor condenses back into a liquid or solid. The released energy helps to warm the air around it, causing it to rise and thus transporting heat vertically.
know more about heat transport here
https://brainly.com/question/15458961#
#SPJ11
the tendency of matter to spread to areas of lower concentration
The tendency of matter to spread to areas of lower concentration is known as diffusion.
Diffusion is the process of particles spreading out evenly in a given space due to the random motion of particles. It is a passive process, which means it does not require the use of energy to occur. Diffusion is an essential process in living organisms. The exchange of gases, nutrients, and waste products between the cells and their environment occurs through diffusion.What is diffusion?Diffusion is the movement of molecules or particles from an area of higher concentration to an area of lower concentration until they reach equilibrium.
The movement of particles continues until a state of equilibrium is reached. Equilibrium is the state where there is no longer a concentration gradient since particles are equally distributed in the system. As a result, the process of diffusion will cease. The rate of diffusion is dependent on various factors, including the size of the particles, the temperature of the system, and the concentration gradient.
The net movement of something, typically from a region with a higher concentration to a region with a lower concentration, is known as diffusion. A variation in chemical potential or Gibbs free energy is what drives diffusion. Wave packet diffusion is referred to in the context of quantum physics.
Know more about Diffusion :
https://brainly.com/question/14852229
#SPJ11