A gravimetric analysis is one way to find out how much-dissolved solids there are in a 100 cm3 sample of river water.
What is gravimetric analysis?Generally, One method to determine the mass of dissolved solids in a 100 cm³ sample of river water is through the use of a gravimetric analysis.
This involves first filtering the water sample to remove any suspended solids, then evaporating the remaining liquid to leave behind the dissolved solids.
The remaining solid material can then be weighed, and the mass of the dissolved solids in the original sample can be calculated.
Additionally, chemical analysis can be used to determine the concentration of dissolved solids by using volumetric analysis, by using ion-selective electrodes or by using spectrophotometry.
Read more about gravimetric analysis
https://brainly.com/question/6178384
#SPJ1
MnO has either the NaCl type structure or the CsCl type structure. The edge length of the MnO unit cell is 4.47 × 10−8 cm, and the density of MnO is 5.28 g/cm3.
a. Does MnO crystallize in the NaCl type or the CsCl type structure?
b. Assuming that the ionic radius of oxygen is 140. pm, estimate the ionic radius of manganese.
c. Does the calculated cation-to-anion radius ratio for MnO substantiate your answer in part a? Explain.
MnO crystallize in the CsCl type structure. The ionic radius of manganese is 79pm.The calculated cation-to-anion radius ratio for MnO doesnot substantiate.
What is crystallization?When atoms or molecules are tightly organized into a structure known as a crystal, a solid is said to have crystallized. Crystals can also form by deposition directly from a gas, precipitating from a solution, or freezing.
a. The NaCl type structure has a face-centered cubic unit cell and the CsCl type structure has a body-centered cubic unit cell. The edge length of a face-centered cubic unit cell is related to the density of the compound as follows:
Edge length = (density)^(-1/3)
The edge length of a body-centered cubic unit cell is related to the density of the compound as follows:
Edge length = (2 * density)^(-1/3)
So, MnO crystallizes in the CsCl type structure.
b. To estimate the ionic radius of manganese in MnO, we can use the edge length of the unit cell and the ionic radius of oxygen. The edge length of the unit cell is equal to twice the distance between cation and anion.
Edge length = 2 * (ionic radius of cation + ionic radius of anion)
By solving the above equation for the ionic radius of manganese, we get:
ionic radius of manganese = (edge length / 2) - ionic radius of oxygen
ionic radius of manganese = (4.47 * 10^-8 cm / 2) - 14010^-12 m = 0.7910^-8 m = 79*10^-12 m = 79 pm
c. By comparing this ratio with typical values for ionic compounds, we can get an idea of the likely crystal structure of a compound.
For compounds that have a cation-to-anion radius ratio greater than 0.7, the crystal structure is likely to be the CsCl type, while compounds with a cation-to-anion radius ratio less than 0.7 are more likely to have a NaCl type structure.
The cation-to-anion radius ratio for MnO is calculated as follows:
Cation-to-anion radius ratio = (ionic radius of manganese) / (ionic radius of oxygen) = 7910^-12 / 14010^-12 = 0.56
As the calculated cation-to-anion radius ratio for MnO is less than 0.7, it does not substantiate.
To know more about crystallization, visit:
brainly.com/question/2130720
#SPJ4
A solid and a liquid are mixed in a test tube. which
of the following observations would indicate that a
chemical reaction occurred between them?
1. A gas is emitted when the mixture begins to fizz.
2. As the ingredients are combined, the test tube gets cooler
3. The combination turns a strong blue tint
The notion of emission gases is outlined above The objective of this example is to resolve the OPF problem in such a way that both FC and emission are concurrently reduced As the seas warm, they release gases, which is how the desired function is described Sunday TimesThe researchers determined the gass pressure and translated it to volumeThe ResearcherIt continued to release gasSunday Times, Times It has a large number of reddish galaxies that are encircled by gas that emits xrays taken from Wikipedia with a CC BYSA 3.0 license, available Flames that are higher up in the material heat it and release gases that selfignite proving the flashover idea
Learn more about A gas is emitted here:
https://brainly.com/question/12737906
#SPJ4
Element x forms three different compounds with element y. Information about these compounds is contained in the table. Compound formula mass of y per gram of x 1 xy6 2. 82 g 2 xy? 1. 41 g 3 xy? 0. 94 g what are the formulas of compounds 2 and 3? replace each question mark with the appropriate integer
The formulae of compounds 2 and 3 is XY₂ and XY₃.
What is compound?A chemical compound is a substance made of numerous identical molecules joined by chemical bonds and containing atoms from various chemical elements. Therefore, a molecule composed entirely of one element's atoms is not a compound. a material made up of two or more different elements joined chemically. Compounds include things like water (H2O), which is created from the elements hydrogen and oxygen, and table salt (NaCl), which is created from the elements sodium and chloride. A substance made up of two or more constituents is called a compound. Water, carbon dioxide, and table salt are examples of compounds.
Here,
The formulae of compounds 2 and 3:
Compound 1: XY6 (2.82g)
Compound 2: XY? (1.41g)
Compound 3: XY? (0.94g)
Compound 1: 2.82/6 = 0.47
Compound 2: 1.41/0.47 = 2
Compound 3: 0.94/0.47 = 3
Compounds 2 and 3 have the following formulas as XY₂ and XY₃.
To know more about compound,
https://brainly.com/question/13516179
#SPJ4
A student models convection currents in a laboratory activity. how are the convection currents in the student’s model different from the convection currents in earth’s atmosphere and oceans?
The warm air in Earth’s atmosphere and the warm water in Earth’s oceans sink instead of rise.
What exactly is the distinction between convection and convection current?The heat energy can be transported by convection by the temperature differential between the two portions of the fluid. Hot fluids tend to ascend due to the temperature differential, but cold fluids prefer to sink. This causes a convection current to form inside the fluid.
Differential heating causes convection currents. Warmer (less dense) stuff rises, whereas cooler (more dense) material sinks. This movement is responsible for the formation of circulation patterns known as convection currents in the Earth’s atmosphere, ocean, and mantle.
To learn more about convection to refer:
https://brainly.com/question/4138428
#SPJ4
Calculate ΔG∘rxn at 298 K for the following reaction:I2(g)+Cl2(g)⇌2ICl(g),Kp=81.9
Express the free energy of the reaction in kilojoules to three significant figures.
I2(g)+Cl2(g)2ICl(g),Kp=81.9 equals 1.091 x 104 J/mol. A system's energy-like property of state function when it is in thermodynamic equilibrium. Free energy shares the same dimensions as other forms of energy, yet unlike other forms of energy, its worth depends on the current condition of the system rather than its past.
How do you define free energy?Free and Gibbs free energy G, which differs from the overall energy change in a chemical reaction, is the amount of energy in a system that can be used to carry out useful work.
What makes free energy so called?Due of its simplicity and accessibility at all times, Gibb free energy is also known as free energy. If necessary, this energy can be provided to the reaction without any effort on its part. The product of the system's temperature and entropy, added together with the system's enthalpy, determines the change of Gibb's free energy.
To know more about free energy visit:
https://brainly.com/question/15319033
#SPJ4
OSMOSIS - DIRECTION AND CONCENTRATION GRADIENTS Hypothesis. Scientific Reasoning Attach TWO images showing initial experiment setup and final results Data Tables Table 6: Sucrose Concentration vs. Tubing Permeability Band Color Sucrose % Initial Volume (mL) Final Volume (mL) Net Displacement (mL) Yellow 30% 10mL 14mL 4mL Red 15% 10mL 12mL 2mL Blue 3% 10mL 9mL - 1ml Green 3% 10mL 6mL -4mL
The hypothesis is that the increase in concentration of sucrose results in increased amount of osmosis.
A hypothesis refers to a proposed explanation for a phenomenon. It is a testable statement regarding the relationship between two or more variables or a proposed explanation for some observed phenomenon. It is an assumption made based on some evidence as presented in the table. In the table it is seen that as sucrose concentration increases, the net displacement decreases. Hence, based on the evidence it can be hypothesized that “the increase in concentration of sucrose results in increased amount of osmosis”.
The reasoning is based on the initial volume (which is same for all) and final volume (which decreases with the increasing concentration of sucrose) and net displacement. Osmosis refers to the movement of water molecules from a solution with a high concentration of water molecules to a solution with a lower concentration of water molecules, through a partially permeable membrane. Net displacement refers to the number of molecules in the direction of the forces minus the number of molecules moving in other direction. Hence, as the net displacement decreases with concentration of sucrose it can be inferred that the increase in concentration of sucrose results in increased amount of osmosis.
Note: The question is incomplete. The complete question is attached.
Learn more about Hypothesis:
https://brainly.com/question/11555274
#SPJ4
A sample of a pure substance contains 7. 22 g of nickel, 2. 53 g phosphorus and 5. 25 g oxygen only. Determine the percent composition of phosphorus substance.
Answer:
It's not entirely clear whether your question is asking for the percent composition of phosphorus in the substance or the percent composition of all the elements in the substance that contains phosphorus. In either case, the percent composition of phosphorus in this substance is 16.9%.
The percent composition of all the elements in the substance is 48.1% nickel, 16.9% phosphorus, and 35.0% oxygen.
Explanation:
The percent composition of a substance in a sample can be found by dividing the mass of each element present in the sample by the total mass of the sample, and then multiplying by 100%.
To find the percent composition of the substance, we compute the total mass of the sample by adding the masses of all the elements present:
7.22 g + 2.53 g + 5.25 g = 15 g
Next, we divide the mass of each element by the total mass of the sample (15 g) and multiply by 100%.
Nickel: (7.22 g / 15 g) * 100% = 48.13%
Phosphorus: (2.53 g / 15 g) * 100% = 16.87%
Oxygen: (5.25 g / 15 g) * 100% = 35.00%
Given to three significant figures, the percent composition of the substance is: 48.1% nickel, 16.9% phosphorus and 35.0% oxygen.
1. How could you calculate the number of moles from the mass and molar mass of a
sample?
The Avogadro's constant, or 022 x 10 23 particles, is the quantity that corresponds to 1 mole.
What does the Avogadro's constant teach us about calculating the amount of moles of any material in the sample?
We may determine the number of particles in 1 mole (or mol) of a material using Avogadro's number. These particles can be atoms, molecules, or electrons. Avogadro's number is equivalent to around 6.0221408571023 mol1.
What makes it Avogadro's number?
It bears the name of the Italian physicist Amedeo Avogadro, who discovered that two gases of equal volume have the same number of molecules when they are at the same temperature and pressure. Early in the 20th century, French scientist Jean Perrin gave the number of units that name.
To know more about Avogadro's constant visit:
https://brainly.com/question/10432809
#SPJ1
What particle is needed to complete the following nuclear equation? 23893np = ____ 0-1e
The following nuclear equation needs a particle to be complete: 23893np =56/26 Fe.
How is a nuclear equation written?The sign is accompanied by two numbers. The mass number, commonly referred to as the "A" number, is the number in the upper right. The "A" number identifies the number of protons and neutrons in the nucleus as well as the atomic weight of the given atom.
What is the equation for nuclear energy?there is a mass shift, m, as a result of nuclear fusion and nuclear fission. Energy E = mc2, where c is the speed of light, is created when mass is lost.
To know more about nuclear equation visit:
https://brainly.com/question/19752321
#SPJ4
16. what factor would you use to convert the empirical formula of a compound to a molecular formula?
The empirical formula of a substance would be transformed into a molecular formula using Molar Mass.
The empirical formula of a chemical compound in chemistry is the simplest whole number ratio of atoms in a compound. A chemical formula identifies each component element by its chemical symbol and the proportion of atoms that make up each element. Calculate the compound's molar mass by deducting the empirical formula mass. The result must be a whole number or very close to one. You need to know a compound's molar mass or molecular mass in order to convert its empirical formula into a molecular formula.
Learn more about Empirical Formula
brainly.com/question/11588623
#SPJ4
by law, what mineral must be added to refined flours during the enrichment process? a. copper b. magnesium c. iron d. iodine e. calcium
Iron must be added to the refined flours during the enrichment process.
Refined grain products to be enriched. this means adding returned certain B vitamins (thiamin, riboflavin, niacin, folic acid) and iron. but, fiber isn't brought again to enriched grains.
The germ is the center of the seed where boom happens; it's far rich in healthy fats, diet E, and B nutrients, phytochemicals, and antioxidants. The endosperm is the interior layer that holds carbohydrates, protein, and small amounts of a few B vitamins and minerals.
The 5 enrichment nutrients are defined by way of the meals and Drug Administration (FDA) and consist of thiamin (vitamin B1, thiamin mononitrate, or thiamin hydrochloride); riboflavin (diet B2); niacin (vitamin B3 or niacinamide); folic acid folate and iron (reduced iron, ferrous sulfate, or ferric orthophosphate).
Learn more about refined grain products:
brainly.com/question/27635345
#SPJ4
Balance the following equation:
K2CrO4+Na2SO3+HCl→KCl+Na2SO4+CrCl3+H2O.
Generally coefficients of 1 are omitted from balanced chemical equations. When entering your answer, include coefficients of 1 as required for grading purposes.
Enter the coefficients for each compound, separated by commas, in the order in which they appear in the equation (e.g., 1,2,3,4,5,6,7).
In the process of oxidizing I− to I2, SO42− is reduced to SO2. How many moles of SO2 are produced in the formation of one mole of I2?
Express your answer numerically in moles.
Concepts and reason
The problem is based on the concept of balancing a chemical equation.
Fundamentals
A balanced chemical equation is the one which has equal number of atoms of elements on the reactant’s side as well as the product’s side of the equation. When an equation is balanced, it then obeys the law of conservation of mass. There are different types of methods to balance a chemical equation like inspection, algebraic, and oxidation number method.
The balanced equation will be K₂CrO₄ + Na₂SO₃ + 2HCl → 2KCl + Na₂SO₄ + CrCl₃ + H₂O.
A balanced chemical equation is a chemical reaction that has equal numbers of moles of chemical substances both in the reactant and the product side.
K₂CrO₄ + Na₂SO₃ + HCl → KCl + Na₂SO₄ + CrCl₃ + H₂O.
Notice that there are two K atoms on the left and one on the right, two Cr atoms on the left and one on the right, four O atoms on the left and one on the right, two Na atoms on the left and two on the right, three S atoms on the left and one on the right, and one H atom on the left and one on the right.
Balance the K atoms, by adding a coefficient of 2 in front of the KCl on the right side of the equation. To balance the Cr atoms, we can add a coefficient of 2 in front of the CrCl3 on the right side of the equation. To balance the O atoms, we can add a coefficient of 3 in front of the H2O on the right side of the equation. To balance the Na atoms, we don't need to add any coefficient. To balance the S atoms, we don't need to add any coefficient. To balance the H atoms, we can add a coefficient of 2 in front of the HCl on the left side of the equation.
The coefficients are now in the smallest whole-number ratio possible.
Check if the equation is now balanced.
So, the balanced equation is: K₂CrO₄ + Na₂SO₃ + 2HCl → 2KCl + Na₂SO₄ + CrCl₃ + H₂O.
Learn more about balanced equation here: https://brainly.com/question/26694427
#SPJ4
Complete this Bronsted-Lowry reaction, placing each product by its appropriate label. HSO4^- + HBrO <=> ____ + ____
The bronsted-Lowry reactions is HSO, +HBrO= H,$O,+BrO,acid:H donor (H,SO,HBIO),base:H' receiver fHSO, where each product is positioned according to its appropriate label. BrO)
What in chemistry is Brnsted-Lowry?
According to the Brnsted-Lowry theory of bases and acids a Brnsted-Lowry base needs at least one single electron pair to take a proton and create a new connection with a proton. A proton is exchanged from such an acid to a base in an acid-base reaction, according to the Brnsted-Lowry definition.
What is a Lewis base versus a Brnsted-Lowry base?
A Brønsted - lowry bases is a chemical that can take a hydrogen ion, whereas a Brønsted - lowry acid can donate one. A Hamilton base is a chemical that can give up two electrons, whereas a Lewis acid can take in two electrons.
To know more about Bronsted-Lowry visit:
https://brainly.com/question/14407412
#SPJ4
Complete the following reaction.a. CH3 + Br FeBr3b. OCH + CH3CI AICI3c. OH + HNO3 H2SO4d. CF3 + H2SO4 SO3
The following reaction CH3 + H2SO4 CH3SH, is completed.
What is reaction?Reaction is the way in which a person or an organism responds to a stimulus. It is a change in behavior or in the physiological or biochemical structures of an organism in response to a stimulus. Reactions can be physical, emotional, or mental. In humans, physical reactions include increased heart rate, sweating, and changes in facial expressions. Emotional reactions include feeling angry, scared, excited, or sad. Mental reactions include thinking, analyzing, and problem solving. All of these reactions are part of the body’s response to stimuli, such as a sound, a smell, a touch, or a taste.
To learn more about reaction
https://brainly.com/question/24795637
#SPJ4
the element x forms ions of charge 2 and the element y forms ions of charge -3. the most likely formula for a binary compound between these two elements is:
The chemical formula of the two elements X whose charge is 2 and Y whose charge 3 is X3Y2.
These steps are used to respond to this type of assignment question:
Remember that every substance has a neutral pH level. In other words, a similar number of positive charges are used to offset any negative charges.
In this scenario, multiplying 2 by a unit of Y will get the total charge for the products.
Determine how much total counter-charge you'll require.
The required charge distribution can be calculated using the formula. Here, X is divided into three equal units for each unit.
Anion valency = number of cations
A cation's valency is equal to the number of anions.
Thus, X3Y2 will be the proper formula.
For more information on chemical formula kindly visit to
https://brainly.com/question/14301583
#SPJ4
if 0.120 m hcl is slowly added to the naoh sample, in what ph range will the indicator change color?
If 0.120 m HCl is slowly added to the NaOH sample, then if the acidic solution increase greater than basic solution, the pH range indicator will change its color between 4.4 and 6.2 indicating red color.
Methyl red has a pKa value of 5. Consequently, between its pKa values of 4 and 6, it displays a colour change range of +/-1 pH unit. In acidic conditions, methyl red, an indicator dye, turns red. It serves as a pH indicator, turning yellow above pH 6.4 and orange between pH 4.4 and 6.2. An azo dye called methyl red is created from benzoic acid and a 2-positional 4-[(dimethylamino)phenyl]diazenyl group. It serves as a dye. It is a monocarboxylic acid, a tertiary amino compound, and a member of the azobenzene family.
To learn more about pH click here https://brainly.com/question/491373
#SPJ4
which components make up the structure of an atp molecule?
An ATP (adenosine triphosphate) molecule is made up of three main components:
1. Adenosine: a nitrogenous base that is composed of adenine, a nitrogen-containing base, and ribose, a five-carbon sugar.
2. Three phosphate groups: These are molecules that consist of a phosphate ion (PO4) and an organic molecule. In ATP, the three phosphate groups are connected to the ribose sugar in a linear fashion, forming a "triphosphate" molecule.
3. A high-energy bond: The high-energy bond is located between the second and third phosphate groups. This bond is formed by the transfer of a phosphate group from the third to the second position, releasing energy that can be used by cells for various metabolic processes.
Together, these three components make up the structure of an ATP molecule, which is considered the "energy currency" of cells.
It acts as a carrier of energy derived from the breakdown of food molecules, like glucose, to the energy-requiring reactions in the cell.
It's worth noting that, The structure and properties of ATP are essential for its function as a primary energy carrier in all living organisms.
What is the empirical formula of the compound: C7H4O2?
a.C14H8O4
b.C3H2O2
c.C7H4O2
Answer:
Explanation: it's right
For parts of the free-response question that require calculations, clearly show the method used and the steps involved in arriving at your answers. You must show your work to receive credit for your answer. Examples and equations may be included in your answers where appropriate. HCl(aq)+NaOH(aq)?NaCl(aq)+H2O(l) A student was given the task of titrating a 20.mL sample of 0.10MHCl(aq) with 0.10MNaOH(aq) . The HCl(aq) was placed in an Erlenmeyer flask. An equation for the reaction that occurs during the titration is given above. (a) According to the equation for the reaction, if the amount of the reactants is halved, how does this affect the amount of H2O(l) produced in the reaction?
Answer: Answer: If the amount of reactants is halved, the amount of H2O(l) produced in the reaction will also be halved.
Explanation: The balanced equation for the reaction between HCl(aq) and NaOH(aq) is:
HCl(aq) + NaOH(aq) --> NaCl(aq) + H2O(l)
From this equation, it is clear that for every 1 mole of HCl(aq) and 1 mole of NaOH(aq) that react, 1 mole of H2O(l) is produced.
If the amount of reactants is halved, the amount of H2O(l) produced will also be halved, because the ratio of reactants to products is 1:1.
So, in the case of 20.mL of 0.10MHCl(aq) + 0.10MNaOH(aq) , the amount of H2O(l) produced is 20.mL x 0.10M = 2.00x10^-3mol.
If the amount of reactants is halved, the amount of H2O(l) produced in the reaction will be 1.00x10^-3mol.
the teachers added about 40 - 50 mL of ice water to the round container. The container is made of 1/8 inch thick cast iron. A lid was put on the container and tightened. The round cast iron container is placed in a metal dish that contains about 200 mL of a dry ice and acetone
what's the claim,evidence and reasoning for it
Answer:
Claim: The round cast iron container filled with ice water and sealed with a lid will maintain its temperature for a certain period of time.
Evidence: The container is made of 1/8 inch thick cast iron and the lid is tightened to prevent heat loss. The container is placed in a metal dish that contains dry ice and acetone which will help to decrease the temperature inside the container.
Reasoning: The cast iron container is a good insulator which means it will slow down the transfer of heat from the inside to the outside. The lid will help to prevent heat loss through convection. The dry ice and acetone in the metal dish will provide a cooling effect to the container, which will help to keep the temperature inside the container low for a longer period of time. The combination of insulation and cooling will help to maintain the low temperature inside the container for a certain period of time.
charlie is balancing an equation. she has identified the atoms and counted the number of each in the reactants and products. what would charlie adjust to make the number of atoms in the reactants the same as the number of atoms in the products?coefficientssubscriptssuperscriptsparentheses
After identifying the atoms and counting the quantities of the reactants and products in the equation, Charlie makes the necessary adjustments to the coefficients so that the number of atoms in the reactants and products are equal.
What is an atom?An atom is made up of a core negatively charged nucleus and one or more circling electrons. The positively charged, relatively large protons and neutrons that make up the nucleus could be present. But for the origin of the name "atom," we must look to 400 B.C. in ancient Greece. Greek philosopher Democritus proposed the usage of the word atomos, which meaning "uncuttable," in this sentence. Ultimately, he asserted, all matter may be reduced to singular, tiny particles called atomos.
How atoms are formed?An atom is made up of protons, neutrons, and electrons that orbit a core nucleus. Uranium splits into smaller atoms and creates new atoms during the fission process. There have been a tremendous number of atoms generated, as evidenced by the Big Bang and supernova events.
To know more Atoms visit:
https://brainly.com/question/13654549
#SPJ4
What will the concentration of Cd^2+ be when Fe^2+ begins to precipitate?
Part A
A solution of Na2CO3 is added dropwise to a solution that contains 1.14x10^-2 M Fe^2+ and 1.50x10^-2 M Cd^2+. What concentration of CO3^2- is need to initiate precipitation? Neglect any volume changes during the addition.
Express the molar concentration numerically.
Part B
In the solution from part A, what will the concentration of CO3^2- be when Fe^2+ begins to precipitate?
Express the molar concentration numerically.
Part C
What will the concentration of Cd^2+ be when Fe^2+ begins to precipitate?
Express the molar concentration numerically.
Cd^2+ = ...?
The concentration of Cd^2+ when Fe^2+ begins to precipitate is 1.50x10^-2 M.
What is concentration?Concentration is the ability to focus intently on a task or activity in order to achieve a desired result. It is a mental skill that requires the ability to ignore distractions, remain focused and motivated, and use all of one's mental resources to complete a task. By developing and strengthening this skill, one can increase their productivity and learn to better manage their time. Concentration also involves the ability to organize and prioritize tasks, as well as to remember and recall information. Concentration is an important skill in many fields, including academics, sports, and the workplace.
The concentration of Cd^2+ when Fe^2+ begins to precipitate will be equal to the original concentration of Cd^2+ in the solution, which was 1.50x10^-2 M.
Therefore, the concentration of Cd^2+ when Fe^2+ begins to precipitate is 1.50x10^-2 M.
To learn more about concentration
https://brainly.com/question/28564792
#SPJ4
You are given the following information, where C represents the specific heat capacity of a material.
For ethanol:
C=2.671 J/g•°C
For water.
C=4.184 J/g•°C
You have two identical containers, one contains 100.0 g of ethanol, and the other contains 100.0 g of water. Each sample starts at 75.0°C. The two samples are
allowed to cool in air.
Which of the following is a CORRECT statement?
A The water will cool to a lower temperature.
B The ethanol will cool to a lower temperature.
C Both will result in the same temperature, but water will cool first.
D Both will result in at the same temperature, but ethanol will cool first.
The substance with lower specific heat capacity cools fastly. Ethanol cool fastly than water. Thus option D is correct.
What is specific heat capacity ?Specific heat capacity of a substance is the heat energy required to increase its temperature by one degree Celsius per on gram. It is an intensive property. Thus does not depends on change in amount.
The substance with high specific heat capacity requires higher heat energy to increase its temperature and takes more time to heat it up as well as to cool.
The specific heat of ethanol is lower compared to water. Thus, it becomes hot as well as cool more fastly than water. Therefore, ethanol cool fastly.
Find more on specific heat :
https://brainly.com/question/11297584
#SPJ1
true or false? a carbon footprint is made up of the sum of two parts, the primary footprint (measure of direct emissions of co2) and the secondary footprint (measure of the indirect co2 emissions).
A carbon footprint is made up of the sum of two parts, the primary footprint (measure of direct emissions of co2) and the secondary footprint (measure of the indirect CO2 emissions). [TRUE]
About Carbon FootprintsCarbon footprint is the amount of carbon or greenhouse gases produced from various human activities in a certain period of time. The carbon footprint is an important instrument for measuring the contribution of individuals, communities, industries, products and others to climate change. By calculating the carbon footprint, an industry can find out the source of its emissions and can minimize its use from an early age.
Here are some sources that can create a carbon footprint:
Vehicle activityVehicle activity is known to cause a carbon footprint. This is due to the process of burning fuel in vehicles. The more use of fossil fuel vehicles, the more carbon emissions will be released into the air.
FoodProduction processes that occur in the agricultural, livestock and plantation sectors up to consumers are known to contribute 25% of greenhouse gas emissions to the world's total greenhouse gas emissions.
Use of Electrical EnergyThe use of electricity for daily life is also known to be a cause of gas emissions. This is because there are still many power plants that still use fossil fuels. So if you are not wise in using electricity, more gas emissions will be produced.
Learn more about Carbon footprint at https://brainly.com/question/1270740.
#SPJ4
after drawing the best lewis structures for so32-, so42-, and so2, place them in order of bond length from shortest to longest?
Bond order, as we know, is inversely related to bond length. Bond length decreases when bond order increases and vice versa. Increasing order of bond length will be SO2<SO42-<SO32-.
Sulphur dioxide has the lowest bond length, whereas sulphite ion does have the longest. Bond order is really the number of electron bonding pairs that exist between two atoms. A single bond has a bond order of one in a covalent bond between two atoms, a double bond does have a bond order of two, a triple bond does have a bond order of three, and on and on. Bond length and bond order are connected; when more electrons engage in bond formation, the bond is shorter. Bond length is often inversely linked to bond strength and bond dissociation energy, thus a stronger bond would be shorter if all other conditions are equal. Half the bond distance between two similar atoms equals the covalent radius.
Bond lengths typically measured inside the solid phase using X-ray diffraction, and in the gas phase using microwave spectroscopy. A bond between a particular pair of atoms might differ amongst molecules. Methane, for example, has different carbon-hydrogen bonds than methyl chloride. However, generalizations are conceivable when the overall structure remains the same.
To know more about the Bond order, here
https://brainly.com/question/29853110
#SPJ4
Predict the products for the following synthesis reaction: Al + Cl2
The products for the following synthesis reaction: Al + Cl2 is AlCl₃ (option C).
What is a synthesis reaction?A chemical reaction is a process involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.
A synthesis reaction is a specific type of chemical reaction that involves the combination of two chemical elements bonded together to produce a compound.
According to this question, aluminium and chlorine gas are combined to form aluminium chloride as follows:
2Al + 3Cl₂ → 2AlCl₃
Therefore, AlCl₃ is the product of the synthesis reaction.
Learn more about synthesis reaction at: https://brainly.com/question/16987748
#SPJ1
a mixture of copper sulfate and water is heated, leaving a residue of copper sulfate in the container. which method was used to separate the mixture?
Evaporation was the process used to separate the copper sulfate and water.
What kind of residue is that, exactly?Anything that remains after a substance has already been removed is called a residue, such as the fat on a frying pan. Additionally, it can simply mean "remainder." Remaining liquid in a bottle, pot, or container after rest has been drained out is referred to as residue.
Chromatography is a separation technique used in labs. The mobile phase or the stationary phase are the two phases of this method.
Mobile phases include both the phase within which the mixture dissolves and the phase that acts as either a carrier through system, such as a sheet or capillary is termed as mobile phase.
The process of evaporation involves using heat to remove dissolved particles from liquid. Heat causes liquid to evaporate, leaving behind the solid. Insoluble particles are removed from the liquid through the process of filtration, which involves permitting it to pass through some kind of porous material like filter paper A method for separating a mixture of liquids having various boiling points is distillation. From this, we might infer that evaporation was the process utilized to separate the salt solution and water mixture.
To know more about Residue visit :
https://brainly.com/question/16794270
#SPJ4
The Complete Question :
A mixture of copper sulfate and water is heated, leaving a residue of copper sulfate in the container. Which method was used to separate the mixture?
A. chromatography
B. evaporation
C. filtration
D. distillation
Which statement defines a field force?
Responses
a force that cannot affect distant objectsa force that cannot affect distant objects
a force that acts through toucha force that acts through touch
a force that acts through a distance a force that acts through a distance
a force that cannot affect matter
The statement defines a field force is b) a force that acts through toucha force that acts through touch.
About field forceField force is a term to express a force that has an influence on its surroundings. Examples are gravitational forces, electric forces, magnetic forces. The three styles have a strong influence on the surrounding area.
About forceIn general, the notion of force is an interaction that can cause an object with mass to experience a change in motion, both in terms of direction and geometry. While the definition of force in a nutshell is a push or pull that is able to move objects freely (not bound).
The concept of force is often juxtaposed with motion. Because, the motion of an object occurs because of the force. Although often equated, in fact force and motion are two different things.
Learn more about field force at
https://brainly.com/question/13488023
#SPJ4
Which of the following pairs of aqueous solutions will form a precipitate when mixed? Li2S + HI MgCl2 + KOH K2CO3 + HNO3 HF+ LiOH All of these solution pairs will produce a precipitate.
MgCl2 + KOH will yield a precipitate because Since Mg(OH) is considered to be "insoluble" based on the solubility chart, it will precipitate where the other reactions listed above are unstable and quickly decompose into water and carbon dioxide.
What is precipitate?In chemistry, a solid is created when a solution changes, frequently as a result of a chemical reaction or a shift in temperature that makes a solid less soluble. A solid that emerges from a solution is called a precipitate. The mixing of two transparent solutions, such as sodium chloride (NaCl) and silver nitrate (AgNO3), is a typical example. The response is. Because the solid (AgCl) is insoluble in water, a precipitate forms. The term "supernate" or "supernatant" also refers to the clear liquid that remains on top of the precipitated or centrifuged solid phase.
Here,
Since Mg(OH) is regarded as being "insoluble" according to the solubility chart, MgCl2 + KOH will result in a precipitate where the other reactions mentioned above are unstable and quickly decompose into water and carbon dioxide.
To know more about precipitate,
https://brainly.com/question/15769904
#SPJ4
what effect will adding too much titrant have on the experimentally determined value of the mass percent of iron in the compound? justify your answer.
Adding too much titrant will result in an artificially inflated value for the mass percent of iron in the compound.
What is compound?Compound is a combination of two or more elements, either in distinct substances or in a single substance, combined in fixed proportions. Compounds can be formed from elements that are naturally occurring, such as salt (NaCl) or from synthetic elements, such as plastics. Compounds can be classified into organic and inorganic compounds. Organic compounds are typically composed of carbon and hydrogen atoms, while inorganic compounds often contain other elements, such as oxygen, nitrogen, sulfur, and phosphorus.
This is because the experimental value of the mass percent of iron is based on a calculation of the amount of titrant used to achieve a specific endpoint, and if too much titrant is added, the endpoint will be reached sooner than it would otherwise.
To learn more about compound
https://brainly.com/question/12862037
#SPJ4
