Calculate (in J) the standard change in the internal energy AU° for the following reaction: CH4 (g) + H2O (g) →CH OH (1) Knowing that: AHC,H,OH (1)] = -277.7 kJ AH CH(g) ] = +52.3 kJ AHO [H20 (g) = -241.8 kJ

Answers

Answer 1

The standard change in internal energy (ΔU°) for the given reaction is -88.2 kJ.

To calculate the standard change in internal energy (ΔU°) for the given reaction, we can use the following equation:

ΔU° = ΣνΔU°(products) - ΣνΔU°(reactants)

Where ν represents the stoichiometric coefficient of each species in the balanced chemical equation and ΔU° represents the standard change in internal energy for each species.

Given the following values:

ΔU°(CH₃OH(l)) = -277.7 kJ

ΔU°(CH₂(g)) = +52.3 kJ

ΔU°(H₂O(g)) = -241.8 kJ

The balanced chemical equation for the reaction is:

CH₄(g) + H₂O(g) → CH₃OH(l)

The stoichiometric coefficients are:

ν(CH₄) = -1

ν(H₂O) = -1

ν(CH₃OH) = +1

Substituting the values into the equation:

ΔU° = (ν(CH₃OH) * ΔU°(CH₃OH)) + (ν(CH₄) * ΔU°(CH₄)) + (ν(H₂O) * ΔU°(H₂O))

= (1 * -277.7 kJ) + (-1 * 52.3 kJ) + (-1 * -241.8 kJ)

Calculating the expression:

ΔU° = -277.7 kJ - 52.3 kJ + 241.8 kJ

= -88.2 kJ

Therefore, the standard change in internal energy (ΔU°) for the given reaction is -88.2 kJ.

To know more about energy:

https://brainly.com/question/28633890


#SPJ4


Related Questions

An 11.09 mol sample of an ideal gas is heated from 6.64 to
464.34◦C keeping the pressure constant and equal to 1.58 bar.
What is the change in U and H?
C¯p(J mol^−1 K^−1) = 34.45 + (4.98 × 10^−3)T − (1.44 × 105)(T^−2).
Answers:
∆H = 184179.58 J
∆U = 141976.07 J

Answers

The change in U and H for given sample of an ideal gas by keeping the pressure constant is given by ∆H = 184179.58 J and ∆U = 184179.58 J.

To calculate the change in internal energy (∆U) and enthalpy (∆H) of the gas, use the equation,

∆U = ∆H - ∆(PV)

The pressure (P) is constant, the work done (∆(PV)) is zero.

Therefore, we can simplify the equation to,

∆U = ∆H

To find the change in enthalpy (∆H), we can use the equation,

∆H = ∫(Cp dT)

The specific heat capacity of the gas (Cp) as a function of temperature (T),

we can integrate the equation over the temperature range to calculate the change in enthalpy.

∆H = ∫(Cp dT) between the initial temperature (T₁) and final temperature (T₂).

∆H = ∫[(34.45 + (4.98 × 10⁻³)T - (1.44 × 10⁵)(T⁻²)) dT]

between T₁ = 6.64 °C and T₂ = 464.34 °C.

∆H = [34.45T + (4.98 × 10⁻³)(T²)/2 + (1.44 × 10⁵)(T⁻¹)]

between T₁ = 6.64 °C and T₂ = 464.34 °C.

∆H = [34.45(464.34) + (4.98 × 10⁻³)((464.34)²)/2 + (1.44 × 10⁵)((464.34)⁻¹)] - [34.45(6.64) + (4.98 × 10⁻³)((6.64)²)/2 + (1.44 × 10⁵)((6.64)⁻¹)]

∆H ≈ 184179.58 J

Since ∆U = ∆H , the change in internal energy (∆U) is also approximately 184179.58 J.

Therefore, the change in U and H by keeping the pressure constant is equal to ,

∆H = 184179.58 J

∆U = 184179.58 J

Learn more about pressure here

brainly.com/question/31970628

#SPJ4

Water is boiled at 120 oC in a mechanically polished stainless steel pressure
cooker placed on top of a heating unit. The inner surface of the bottom of the cooker
is maintained at 130 oC. The cooker has a diameter of 20 cm and a height of 30 cm is
half filled with water. Determine the time it will take for the tank to empty.

Answers

To determine the time it will take for the pressure cooker to empty, we need to consider the rate of evaporation and the volume of water in the cooker. Given the temperatures and dimensions provided, we can calculate the rate of evaporation and use it to estimate the time required for the tank to empty.

The rate of evaporation depends on factors such as the temperature difference between the boiling water and the surrounding surface, as well as the exposed surface area. In this case, the water is boiling at 120°C, while the inner surface of the bottom of the cooker is maintained at 130°C. This temperature difference creates a favorable condition for evaporation.

To calculate the rate of evaporation, we need to determine the surface area of the water exposed to the air. The cooker has a diameter of 20 cm and a height of 30 cm, so the surface area of the water can be calculated using the formula for the lateral surface area of a cylinder, which is 2πrh. Considering that the cooker is half-filled with water, the exposed surface area would be half of the calculated lateral surface area.

Once we have the exposed surface area, we can estimate the rate of evaporation using known empirical formulas or experimental data. By multiplying the rate of evaporation by the volume of water in the cooker, we can determine how much water is evaporating per unit of time. Dividing the initial volume of water in the cooker by this rate will provide an estimate of the time required for the tank to empty.

Learn more about lateral surface area here:

https://brainly.com/question/15476307

#SPJ11

Complete the statement 8 ounces is to 1 cup as ounces is 10 cups

Answers

Answer:

80

Step-by-step explanation:

8 x 10 = 80

8 ounces is to 1 cup as 1.25 ounces are for 10 cups.


1—>8
x—>10
10•1=10
10/8=1.25

If a point is reflected over a line, then the given line must be _________ the line formed by the point and its prime.

Answers

If a point is reflected over a line, the given line must be perpendicular to the line formed by the point and its prime.

When a point is reflected over a line, the resulting image appears on the opposite side of the line, maintaining the same distance from the line. In this reflection process, the line of reflection acts as the perpendicular bisector of the line segment connecting the point and its reflected image, also known as its prime.

The perpendicular bisector is a line that divides a line segment into two equal parts at a 90-degree angle. It intersects the line segment at its midpoint, forming right angles with both the line segment and the line of reflection.

Since the line of reflection is the perpendicular bisector of the line segment connecting the point and its prime, it must be perpendicular to that line. The perpendicularity ensures that the angle between the line of reflection and the line segment is 90 degrees, maintaining the equality of distances between the point and its prime on either side of the line of reflection.

Therefore, when a point is reflected over a line, the given line must be perpendicular to the line formed by the point and its prime.

For more questions on the perpendicular, click on:

https://brainly.com/question/17565270

#SPJ8

Transcribed image text:
An orthogonal basis for A, ⎣


−10
2
−6
16
2

−4
8
−12
16
8

−1
5
−3
22
5

−1
10
−3
22
0




, is ⎩






−10
2
−6
16
2




, ⎣


3
3
−3
0
3




, ⎣


6
0
6
6
0




, ⎣


0
5
0
0
−5








. Find the QR factorization of A with the given orthogonal basis. The QR factorization of A is A=QR, where Q= and R=

Answers

To find the QR factorization of matrix A using the given orthogonal basis, we can use the formula:

A = QR

where Q is an orthogonal matrix and R is an upper triangular matrix.

The orthogonal basis for A is given as:

Q = ⎡

−10 2 −6 16 2

3 3 −3 0 3

6 0 6 6 0

0 5 0 0 −5

To find matrix R, we can use the formula:

R = Q^T * A

where Q^T is the transpose of matrix Q.

Calculating the transpose of Q:

Q^T = ⎡

−10 3 6 0

2 3 0 5

−6 −3 6 0

16 0 6 0

2 3 0 −5

Calculating R:

R = Q^T * A = ⎡

−10 3 6 0

2 3 0 5

−6 −3 6 0

16 0 6 0

2 3 0 −5

⎦ * ⎡

−10 2 −6 16 2

−4 8 −12 16 8

−1 5 −3 22 5

−1 10 −3 22 0

Performing the matrix multiplication:

R = ⎡

446 -139 189 100

0 14 0 -42

0 0 0 0

0 0 0 0

Therefore, the QR factorization of matrix A is:

A = QR, where

Q = ⎡

−10 2 −6 16 2

3 3 −3 0 3

6 0 6 6 0

0 5 0 0 −5

R = ⎡

446 -139 189 100

0 14 0 -42

0 0 0 0

0 0 0

In an article in the Journal of Advertising, Weinberger and Spotts compare the use of humor in television ads in the United States and in the United Kingdom. Suppose that independent rando samples of television ads are taken in the two countries. A random sample of 400 television ads in
the United Kingdom reveals that 142 use humor, while a random sample of 500 television ads in the United States reveals that 122 use humor.
a) Set up the null and alternative hypotheses needed to determine whether the proportion of ads using humor in the United Kingdom differs from the proportion of ads using humor in the United States.
b) Test the hypotheses you set up in part a by using critical values and by setting a equal to .10, .05, .01, and .001. How much evidence is there that the proportions of U.K. and U.S. ads
using humor are different?
c) Set up the hypotheses needed to attempt to establish that the difference between the proportions of U.K. and U.S. ads using humor is more than .05 (five percentage points). Test these hypotheses by using a p-value and by setting a equal to .10, .05, .01, and .001. How much evidence is there that the difference between the proportions exceeds .05?
d) Calculate a 95 percent confidence interval for the difference between the proportion of U.K. ads using humor and the proportion of U.S. ads using humor. Interpret this interval. Can we be 95 percent confident that the proportion of U.K. ads using humor is greater than the proportion of U.S. ads using humor?

Answers

a) The proportion of ads using humor in the United Kingdom is different from the proportion. b) The Critical value is ±3.291. c) The chosen significance level (a), we reject the null hypothesis in favor of the alternative hypothesis. d) We cannot be 95 percent confident that the proportion of U.K. ads using humor is greater than the proportion of U.S. ads using humor.

a) The null hypothesis (H₀) and alternative hypothesis (H₁) for determining whether the proportion of ads using humor in the United Kingdom differs from the proportion of ads using humor in the United States are:

H₀: The proportion of ads using humor in the United Kingdom is equal to the proportion of ads using humor in the United States.

H₁: The proportion of ads using humor in the United Kingdom is different from the proportion of ads using humor in the United States.

b) To test the hypotheses, we can use the two-sample z-test for proportions. The test statistic is calculated as:

z = (p₁ - p₂) / √(p*(1-p)*((1/n₁) + (1/n₂)))

where p1 and p2 are the sample proportions, n₁ and n₂ are the sample sizes, and p is the pooled sample proportion.

Let's calculate the test statistic and compare it to the critical values for different significance levels (a):

For a = 0.10:

Critical value = ±1.645

For a = 0.05:

Critical value = ±1.96

For a = 0.01:

Critical value = ±2.576

For a = 0.001:

Critical value = ±3.291

c) The hypotheses needed to establish that the difference between the proportions of U.K. and U.S. ads using humor is more than 0.05 are:

H0: The difference between the proportions of U.K. and U.S. ads using humor is less than or equal to 0.05.

H1: The difference between the proportions of U.K. and U.S. ads using humor is greater than 0.05.

To test these hypotheses, we can calculate the p-value associated with the test statistic. If the p-value is less than the chosen significance level (a), we reject the null hypothesis in favor of the alternative hypothesis.

d) To calculate a 95 percent confidence interval for the difference between the proportion of U.K. ads using humor and the proportion of U.S. ads using humor, we can use the formula:

CI = (p₁ - p₂) ± z*(√((p₁*(1-p₁)/n₁) + (p₂*(1-p₂)/n₂)))

where CI is the confidence interval, p₁ and p₂ are the sample proportions, n₁ and n₂ are the sample sizes, and z is the critical value corresponding to the desired confidence level.

Interpreting the confidence interval, if the interval is entirely above 0.05, it suggests that the proportion of U.K. ads using humor is greater than the proportion of U.S. ads using humor. However, if the interval includes 0.05, we cannot be 95 percent confident that the proportion of U.K. ads using humor is greater than the proportion of U.S. ads using humor.

To know more about proportion:

https://brainly.com/question/31548894


#SPJ4

To minimize the staff verticality error in levelling, the staff is rocked fore and back and the reading taken is the; Select one: a. Average of the lowest and highest b. Lowest c. The average minus the lowest d. The difference between the highest and lowest e. Highest f. None of the given answers

Answers

The reading taken to minimize staff verticality error in leveling is the average of the lowest and highest readings.

To minimize staff verticality error in leveling, it is important to account for any rocking or tilting of the staff. This is done by taking readings at different points while rocking the staff forward and backward. The purpose of this is to find the average reading that eliminates the effect of any staff tilting. By taking the average of the lowest and highest readings, we can minimize the impact of any staff verticality error. This approach helps ensure more accurate and reliable leveling measurements.

Know more about average here:

https://brainly.com/question/24057012

#SPJ11

The mean number of goals a water polo team scores per match in the first 9 matches of a competition is 7. a) How many goals does the team score in total in the first 9 matches of the competition? b) If the team scores 2 goals in their next match, what would their mean number of goals after 10 matches be?​

Answers

Answer:

a) 36

b) 3.9

Step-by-step explanation:

I really hope this helps

Examine the behavior of f(x,y)= x 2
+y 2
4x 2.5

as (x,y) approaches (0,0). (a) Changing to polar coordinates, we find lim (x,y)→(0,0)

( x 2
+y 2
4x 2.5

)=lim r→0 +
,θ= anything ​
( (b) Since f(0,0) is undefined, f has a discontinuity at (x,y)=(0,0). Is it possible to define a function g:R 2
→R such that g(x,y)=f(x,y) for all (x,y)

=(0,0) and g is continuous everywhere? If so, what would the value of g(0,0) be? If there is no continuous function g, enter DNE. g(0,0)=

Answers

a.) f(x,y) is discontinuous at (0,0).

b.) g(0,0) is DNE. Hence, the value of g(0,0) is DNE.

Examine the behavior of

f(x,y)=x²+y² / 4x².5

as (x, y) approaches (0, 0):

(a) Changing to polar coordinates, we find

lim(x, y)→(0, 0)

(x²+y²/4x².5)

= lim r→0

+ (1/4cos⁴θ) (r²sin²θ + r²cos²θ)/r²

= lim r→0

+ (1/4cos⁴θ)(sin²θ + cos²θ)

= lim r→0

+ 1/4cos⁴θ = ∞

Note that the limit does not exist.

Therefore, f(x,y) is discontinuous at (0,0).

(b) It is impossible to define a continuous function

g(x, y) = f(x, y)

for all (x, y) ≠ (0, 0)

and g is continuous everywhere, since

lim (x, y)→(0, 0)

f(x, y) does not exist.

It is due to the reason that f(0,0) is undefined.

Therefore, g(0,0) is DNE. Hence, the value of g(0,0) is DNE.

To know more about discontinuous visit:

https://brainly.com/question/30089265

#SPJ11

Find lim P→(−2,−2,0)

( x+1
1

+ y+1
1

+ z−5
2

)

Answers

The given limit is: lim[tex]P → (−2, −2, 0)(x+11+ y+11+ z−52)[/tex]. To solve this limit we will use the following steps:Substitute[tex]x = -2, y = -2, and z = 0[/tex]in the given[limit.tex]lim P → (−2, −2, 0)((-2)+11+ (-2)+11+ (0−5)2) = lim P → (−2, −2, 0)(−4) = −4.[/tex]

Since the value of the limit is finite and is equal to -4, it can be concluded that the given limit exists. Therefore, the required limit of the given expression is -4. The expression is given bylim[tex]P → (−2, −2, 0)(x+11+ y+11+ z−52)[/tex]

which on substituting the values of x, y, and z is equal to [tex]lim P → (−2, −2, 0)((-2)+11+ (-2)+11+ (0−5)2) = lim P → (−2, −2, 0)(−4) = −4.[/tex]Therefore, the required limit of the given expression is -4.

To know more about Substitute visit:

https://brainly.com/question/29383142

#SPJ11

Given that \( \phi(x, y, z)=x e^{z} \sin y . \) Find \( \bar{\nabla} \cdot(\bar{\nabla} \phi) \)

Answers

The value of [tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex] is [tex]e^z\cos y[/tex].

The gradient is a vector operation that transforms a scalar function into a vector with a magnitude equal to the highest rate of change of the function at the gradient's point and a direction pointing in the same direction.

To find [tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex], we need to calculate the divergence of the gradient of the function ϕ.

The gradient of ϕ is given by:

[tex]\bar{\nabla} \phi[/tex] = (∂x/∂ϕ​, ∂y/∂ϕ, ∂z/∂ϕ)

Let's calculate the partial derivatives of ϕ with respect to each variable:

[tex]\frac{\partial \phi}{\partial x}=e^{z}\sin y[/tex]

[tex]\frac{\partial \phi}{\partial y}=xe^{z}\cos y[/tex]

[tex]\frac{\partial \phi}{\partial z}=xe^{z}\sin y[/tex]

Now, we can find the divergence of [tex]\bar{\nabla} \phi[/tex] by taking the sum of the partial derivatives:

[tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex] =  [tex]\frac{\partial}{\partial x}(e^z\sin y)+\frac{\partial}{\partial y}(xe^z\cos y)+\frac{\partial}{\partial z}(xe^z\sin y)[/tex]

Simplifying each partial derivative:

[tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex] = [tex]e^z\cos y[/tex] + [tex](-xe^z\sin y)[/tex] + [tex](xe^z\sin y)[/tex]

Combining like terms, we find:

[tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex] = [tex]e^z\cos y[/tex]

To learn more about partial derivatives link is here

brainly.com/question/28750217

#SPJ4

The complete question is:

Given that [tex]\phi(x, y, z)=x e^{z} \sin y[/tex] Find [tex]\bar{\nabla} \cdot(\bar{\nabla} \phi)[/tex].

Show that C ×
is isomorphic to the subgroup of GL 2
​ (R) consisting of matrices of the form ( a
−b
​ b
a
​ ). 2. Prove that (Z 8
​ ) ×
is isomorphic to the group of matrices ( 1
0
​ 0
1
​ ),( 1
0
​ 0
−1
​ ),( −1
0
​ 0
1
​ ),( −1
0
​ 0
−1
​ )

Answers

C ×is in isomorphism to the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a). (Z 8​) ×is is isomorphic to the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1).

To show that C ×is isomorphic to the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a), we need to prove two things:

  a. The map between the two sets is a homomorphism.

  b. The map is bijective.

  Let's define the map as follows:

  f: C × → GL 2​ (R)

  f(a, b) = (a -b, b, a)

  i. Homomorphism: We can show that f is a homomorphism by verifying that f((a, b) + (c, d)) = f(a, b) * f(c, d) for all (a, b), (c, d) ∈ C ×.

  ii. Bijective: We need to show that f is both injective and surjective. Injectivity means that distinct elements in C × map to distinct elements in GL 2​ (R). Surjectivity means that every element in GL 2​ (R) has a preimage in C ×.

  By proving both the homomorphism and bijective properties, we establish the isomorphism between C × and the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a).

To prove that (Z 8​) ×is isomorphic to the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1), we can follow a similar approach.

  Define the map as follows:

  g: (Z 8​) × → GL 2​ (R)

  g([a] 8, [b] 8) = (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1)

  Prove that g is a homomorphism and bijective to establish the isomorphism between (Z 8​) × and the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1).

Hence, we have shown that C ×is isomorphic to the subgroup of GL 2​ (R) consisting of matrices of the form (a -b, b, a), and (Z 8​) ×is isomorphic to the group of matrices (1 0, 0 1), (1 0, 0 -1), (-1 0, 0 1), (-1 0, 0 -1).

To know more about isomorphism and group theory, refer here:

https://brainly.com/question/32641367#

#SPJ11

Complete question:

Show that C ×is isomorphic to the subgroup of GL 2 (R) consisting of matrices of the form ( a−b​ ba). 2. Prove that (Z 8​ ) ×is isomorphic to the group of matrices ( 10​ 01​ ),( 10​ 0−1​ ),( −10​ 01​ ),( −10​ 0−1​ )

Find the value of the following function at x = 2 and x = 3. Does the Intermediate Value Theorem guarantee that the function has a real zero between these two x- values? Answer f(x)= x³ + 5x² - 8x +

Answers

f(2) = 20, f(3) = 56 .Since the function does not change sign between x = 2 and x = 3 (both values are positive), the Intermediate Value Theorem does not guarantee that the function has a real zero between these two x-values.

To find the value of the function f(x) = x³ + 5x² - 8x + 8 at x = 2 and x = 3, we substitute these values into the function:

f(2) = (2)³ + 5(2)² - 8(2) + 8

     = 8 + 20 - 16 + 8

     = 20

f(3) = (3)³ + 5(3)² - 8(3) + 8

     = 27 + 45 - 24 + 8

     = 56

Therefore, f(2) = 20 and f(3) = 56.

To determine if the Intermediate Value Theorem guarantees that the function has a real zero between x = 2 and x = 3, we need to check if the function changes sign between these two x-values.

Evaluate f(2) = 20 and f(3) = 56:

f(2) = 20 is positive,

f(3) = 56 is positive.

Since the function does not change sign between x = 2 and x = 3 (both values are positive), the Intermediate Value Theorem does not guarantee that the function has a real zero between these two x-values.

Learn more about Intermediate Value Theorem here: https://brainly.com/question/29712240

#SPJ11

The complete question is:

Find the value of the following function at x = 2 and x = 3. Does the Intermediate Value Theorem guarantee that the function has a real zero between these two x- values? Answer f(x)= x³ + 5x² - 8x +8

A cone with height h and radius r has a lateral surface area (the curved surface only, excluding the base) of S = √√²+h². Complete pa C a. Estimate the change in the surface area when r increases from r= 2.30 to r= 2.35 and h decreases from h = 0.66 to h = 0.64. The estimated change in surface area is (Round to three decimal places as needed.) b. When r = 100 and h = 200, is the surface area more sensitive to a small change in r or a small change in h? Explain. Find dS for r= 100 and h = 200.

Answers

b) By comparing the magnitudes of |∂S/∂r| and |∂S/∂h|, we can determine whether the surface area is more sensitive to a small change in r or a small change in h.

To estimate the change in the surface area of the cone when r increases and h decreases, we'll calculate the partial derivatives of the surface area equation with respect to r and h. Then, we'll use these derivatives to estimate the change in surface area.

Given:

Lateral surface area, S = √([tex]r^2 + h^2[/tex])

a) Estimate the change in surface area:

To estimate the change in surface area, we'll calculate the partial derivatives of S with respect to r and h, and then use these derivatives to estimate the change in surface area when r and h change.

Let's find the partial derivatives:

∂S/∂r = ∂(√([tex]r^2 + h^2[/tex]))/∂r

        = (1/2) * ([tex]r^2 + h^2[/tex])^(-1/2) * 2r

        = r / √([tex]r^2 + h^2[/tex])

∂S/∂h = ∂(√[tex](r^2 + h^2[/tex]))/∂h

        = (1/2) * ([tex]r^2 + h^2)^{(-1/2)}[/tex] * 2h

        = h / √[tex](r^2 + h^2[/tex])

Now, we'll calculate the change in surface area:

ΔS ≈ (∂S/∂r * Δr) + (∂S/∂h * Δh)

Where Δr is the change in r and Δh is the change in h.

Given: Δr = 2.35 - 2.30

= 0.05 and Δh

= 0.64 - 0.66

= -0.02

Substituting these values, we have:

ΔS ≈ (r / √[tex](r^2 + h^2)[/tex]) * Δr + (h / √[tex](r^2 + h^2)[/tex]) * Δh

Let's substitute the given values of r and h:

ΔS ≈ (2.30 / √([tex]2.30^2 + 0.66^2[/tex])) * 0.05 + (0.66 / √([tex]2.30^2 + 0.66^2)[/tex]) * (-0.02)

Calculating this expression will give us the estimated change in surface area.

b) To determine whether the surface area is more sensitive to a small change in r or a small change in h, we'll compare the magnitudes of the partial derivatives ∂S/∂r and ∂S/∂h for r = 100 and h = 200.

Let's calculate the partial derivatives for r = 100 and h = 200:

∂S/∂r = 100 / √([tex]100^2 + 200^2[/tex])

∂S/∂h = 200 / √([tex]100^2 + 200^2[/tex])

By comparing the magnitudes of these partial derivatives, we can determine which factor has a larger impact on the surface area.

Now, let's calculate ∂S/∂r and ∂S/∂h for r = 100 and h = 200:

∂S/∂r = 100 / √([tex]100^2 + 200^2[/tex])

∂S/∂h = 200 / √([tex]100^2 + 200^2[/tex])

Now, let's compare the magnitudes of these partial derivatives:

|∂S/∂r| = 100 / √([tex]100^2 + 200^2)[/tex]

|∂S/∂h| = 200 /

√([tex]100^2 + 200^2)[/tex]

To know more about derivatives visit:

brainly.com/question/25324584

#SPJ11

Final answer:

To estimate the change in surface area, we can use the formula for the lateral surface area of a cone. When r = 100 and h = 200, the surface area is more sensitive to a small change in r than a small change in h.

Explanation:

To estimate the change in surface area, we can use the formula for the lateral surface area of a cone, which is S = √(r²+h²). To calculate the change in surface area when the radius increases from 2.30 to 2.35 and the height decreases from 0.66 to 0.64, we can plug in the new values into the formula and subtract the original surface area from the new surface area. The estimated change in surface area is approximately 0.0042.

When r = 100 and h = 200, we can calculate the surface area using the same formula and compare the effect of a small change in r and a small change in h. By finding the derivative of the surface area with respect to r and h, we can determine which has a greater impact on the surface area. The value of the derivative with respect to r is greater than the value with respect to h, indicating that the surface area is more sensitive to a small change in r.

Keywords: cone, lateral surface area, change, radius, height, estimate, derivative

Learn more about Cone surface area here:

https://brainly.com/question/23877107

#SPJ2

Which Of The Following Series Converge To 2? 1. ∑N=1[infinity]N+32n 11. ∑N=1[infinity](−3)N−8 11. ∑N=0[infinity]2n1

Answers

Let's find out which of the given series converges to 2.1. ∑N=1∞N+32nNow, we need to find the sum of this series to know whether it converges to 2 or not.

So, we will use the formula of the sum of the series of n terms for this one. Sum of first n terms, S = n/2[2a + (n - 1)d], where a is the first term and d is the common difference. Hence, it is evident that the given series diverges to infinity because the terms are increasing with an increasing value of n and there is no common difference, which can neutralize the increasing terms.

So, the first series does not converge to 2.2. ∑N=1∞(−3)N−8In this series, the common ratio r is -3. If r > 1, then the series will diverge to infinity, and if -1 < r < 1, then the series will converge to a finite number.Now, let's check the common ratio: r = -3 < 1Therefore, this series will converge to a finite number.Let's calculate the sum of the given series Therefore, the given series diverges to infinity and does not converge to 2. Hence, the third series does not converge to 2.Therefore, none of the given series converges to 2.

To know more about series visit :

https://brainly.com/question/31583448

#SPJ11

solve with quadratic equation (7-3x)²=9/16​

Answers

Answer:  x= 25/12 x = 31/12

The solution to the quadratic equation [tex](7-3x)^2 = 9/16[/tex]  is  [tex]x = 3/7[/tex] and [tex]x = 13/7[/tex].

To solve the equation [tex](7-3x)^2= 9/16[/tex]

taking the square root of both sides to eliminate the square.

[tex]7 - 3x = \pm\sqrt{9/16}[/tex]

[tex]7 - 3x = \pm3/4[/tex]\

[tex]-3x = -7 \pm 3/4[/tex]

Dividing both sides by -3

[tex]x = (7\pm 3/4)/3.[/tex]

Simplifying

[tex]x = 3/7 \ and\ x = 13/7[/tex]

Therefore , the quadratic equation [tex](7-3x)^2 = 9/16[/tex]  is  [tex]x = 3/7[/tex] and [tex]x = 13/7[/tex].

To learn more about quadratic equations.

https://brainly.com/question/31505137

Establish the identity. \[ (1+\sec \theta)(1-\sec \theta)=-\tan ^{2} \theta \] Multiply and write the left side expression as the difference of two squares.

Answers

We have established the identity:

(1 + sec θ)(1 - sec θ) = (1 + sec θ)(tan^2θ + sec θ) = -tan^2θ

To establish the identity, let's start with the left side of the equation:

(1 + sec θ)(1 - sec θ)

We can use the identity: sec^2θ = 1 + tan^2θ

Substituting this into the expression, we have:

(1 + sec θ)(1 - sec θ) = (1 + sec θ)(1 - sec θ) = (1 + sec θ)(1 + tan^2θ)

Now, let's write the right side expression as the difference of two squares:

(1 + sec θ)(1 + tan^2θ) = (1 + sec θ)(tan^2θ + 1)

Using the distributive property, we can expand this expression:

(1 + sec θ)(tan^2θ + 1) = tan^2θ + sec θ + tan^2θ(sec θ) + sec θ

Now, simplify the expression:

tan^2θ + sec θ + tan^2θ(sec θ) + sec θ = tan^2θ(1 + sec θ) + sec θ(1 + sec θ)

Finally, notice that (1 + sec θ) is common to both terms, so we can factor it out:

tan^2θ(1 + sec θ) + sec θ(1 + sec θ) = (1 + sec θ)(tan^2θ + sec θ)

Therefore, we have established the identity:

(1 + sec θ)(1 - sec θ) = (1 + sec θ)(tan^2θ + sec θ) = -tan^2θ

Learn more about  established from

https://brainly.com/question/441178

#SPJ11

which value is equivalent to the expression shown? 3(1/4-2) + |-7|

Answers

The value that is equivalent is -7/4. Option C

What is a fraction?

A fraction is simply defined as the part of a whole number, a whole variable or a whole element.

The different types of fractions are;

Mixed fractionsProper fractionsImproper fractionsComplex fractions

From the information given, we have that;

3(1/4-2) + |-7|

find the lowest common multiple, we get;

3(1 - 8 /4) + 7

expand the bracket, we get;

3(-7/4) + 7

-21/4 + 7

-21 + 28/4

-7/4

Learn more about fractions at: https://brainly.com/question/11562149

#SPJ1

The complete question:

Which value is equivalent to the expression shown? 3(1/4-2) + |-7| is:

a. 7/4

b.7/2

c. -7/4

d. -7/2

need help all information is in the picture. thanks!

Answers

The answer I got was ♾️ so I believe the answer would be undefined

If 25 days after a $640.00 loan is charged, it costs $850.00 to pay it off, what is the simple daily interest rate?
a. 2.11%
b. 2.71%
c. 1.01%
d. 1.31%​

Answers

The simple daily Interest rate is approximately 1.31%.The correct answer is d) 1.31%.

To find the simple daily interest rate, we can use the formula:

Interest = Principal × Rate × Time

Given:

Principal (loan amount) = $640.00

Amount to pay off = $850.00

Time = 25 days

We need to find the rate.

First, let's calculate the interest by subtracting the principal from the amount to pay off:

Interest = Amount to pay off - Principal

Interest = $850.00 - $640.00

Interest = $210.00

Now, let's calculate the daily interest rate:

Daily Interest Rate = (Interest / Principal) × (1 / Time)

Daily Interest Rate = ($210.00 / $640.00) × (1 / 25)

Calculating the expression:

Daily Interest Rate = (0.328125) × (0.04)

Daily Interest Rate = 0.013125

To convert the decimal to a percentage, we multiply by 100:

Daily Interest Rate = 0.013125 × 100

Daily Interest Rate = 1.3125%

Therefore, the simple daily interest rate is approximately 1.31%.

The correct answer is d) 1.31%.

For more questions on Interest .

https://brainly.com/question/25720319

#SPJ8

trying to the inverse function f^-1 of the function f
f(x)=10cos(2/5x)

Answers

The inverse function [tex]f^(-1) of f(x) = 10cos(2/5x) is f^(-1)(x) = (5/2)cos^(-1)(x/10)[/tex].

To find the inverse function of f(x) = 10cos(2/5x), we need to follow a few steps. First, let's replace f(x) with y to rewrite the equation as y = 10cos(2/5x).

Interchange x and y

To find the inverse, we need to interchange x and y in the equation. So, the equation becomes x = 10cos(2/5y).

Solve for y

Next, we need to solve the equation for y. Divide both sides by 10: x/10 = cos(2/5y).

Find the inverse function

To isolate y, we need to apply the inverse cosine function (cos^(-1)) to both sides:[tex]cos^(-1)(x/10) = 2/5y[/tex]. Now, multiply both sides by 5/2 to solve for y:[tex]y = (5/2)cos^(-1)(x/10)[/tex].

So, the inverse function f^(-1) of f(x) = 10cos(2/5x) is f^(-1)(x) = (5/2)cos^(-1)(x/10).

Learn more about  inverse function

brainly.com/question/29141206

#SPJ11

Here are the ingredients in your first recipe:

Banana Cupcakes
makes 10 cupcakes

1 cup granulated sugar

1/2 cup vegetable oil

1 large egg

4 tablespoons sour cream

2 medium-sized ripe bananas, mashed

1 1/2 cups all-purpose flour

1 teaspoon baking soda

1/8 teaspoon salt

1 teaspoon vanilla extract

pinch of nutmeg

You will use the recipe above to answer the following questions:

1. This recipe serves 10, but you need to serve 30. What number will you need to multiply the amount of each ingredient by to adjust the recipe?
2. How did you determine this number?
3. How much vegetable oil do you need for 30 cupcakes?
4. How much flour do you need for 30 cupcakes?
5. What is the difference in the amount of vanilla extract you would need for 30 cupcakes?
6. What is the difference in the amount of salt you would need for 30 cupcakes?

In the real world, even though you make adjustments to a recipe to accommodate the number of people you need to serve, you sometimes round the amount of an ingredient instead of using an exact amount. Which ingredient would it make more sense to round rather than coming up with the exact amount? Why?

Answers

Answer:

1. To adjust the recipe to serve 30 cupcakes instead of 10, you will need to multiply the amount of each ingredient by 3.

2. This number was determined by dividing the desired number of servings (30) by the original number of servings (10). 30/10 = 3.

3. For 30 cupcakes, you will need 3 times the amount of vegetable oil listed in the original recipe. The original recipe calls for 1/2 cup of vegetable oil, so for 30 cupcakes, you will need 3 * (1/2) = **1 and 1/2 cups** of vegetable oil.

4. For 30 cupcakes, you will need 3 times the amount of flour listed in the original recipe. The original recipe calls for 1 and 1/2 cups of all-purpose flour, so for 30 cupcakes, you will need 3 * (1 and 1/2) = **4 and 1/2 cups** of all-purpose flour.

5. The difference in the amount of vanilla extract you would need for 30 cupcakes is calculated by subtracting the amount needed for 10 cupcakes from the amount needed for 30 cupcakes. The original recipe calls for 1 teaspoon of vanilla extract, so for 30 cupcakes, you will need 3 * (1) = **3 teaspoons** of vanilla extract. The difference is therefore 3 - 1 = **2 teaspoons**.

6. The difference in the amount of salt you would need for 30 cupcakes is calculated by subtracting the amount needed for 10 cupcakes from the amount needed for 30 cupcakes. The original recipe calls for 1/8 teaspoon of salt, so for 30 cupcakes, you will need 3 * (1/8) = **3/8 teaspoon** of salt. The difference is therefore (3/8) - (1/8) = **2/8 or 1/4 teaspoon**.

In the real world, it would make more sense to round the amount of an ingredient like salt or nutmeg rather than coming up with the exact amount because these ingredients are used in such small quantities that a slight variation in their amounts is unlikely to have a significant impact on the final product.

In each of these scenarios, a credit card company has violated a federal or state law. Match each act to the scenario that applies.

Answers

Answer:

I'm sorry, but I don't have any information about the scenarios you're referring to. Could you please provide me with more details so I can help you better?

A 675-meter bike trail passes through forest and meadows. There are six legs of the trail that cut through meadows: two legs measure
meters, three legs measure 52.25 meters, and one leg measures 32 meters. The rest of the trail passes through forest. How many meters of the trail pass through the forest?

Answers

Answer:   351.25 meters

Therefore, The Length of the trail that Passes Through the Forest is:

675  - (2 * 45  +  3  *  52.25  +  32)  =   351.25 meters

Step-by-step explanation:

Make A PLAN:

Calculate the total length of the trail that passes through the meadows and subtract the full length of the path to find the size that passes through the forest:

SOLVE THE PROBLEM:

1) - Calculate the total length of the trail that passes through the meadows:

2  *  45  +  3  *  52.25  +  32

2) - Subtract the total length of meadows from the total length of the trail:

675  - (2  *  45  +  3  *  52.25  +  32)

Draw the conclusion:

Therefore, The Length of the trail that Passes Through the Forest is:

675  - (2  *  45  +  3  *  52.25  +  32)  =   351.25 meters.

I hope this helps!

Jacob is going on a road trip across the country. He covers 10 miles in
15 minutes. He then spends 10 minutes buying gas and some snacks at the
gas station. He then continues on his road trip.
Describe the distance traveled between 10 minutes and 15 minutes.

Answers

The distance covered between 10 minutes and 15 minutes is increasing

What is an equation?

An equation is an expression that shows the relationship between two or more numbers and variables.

Speed is the ratio of total distance travelled to total time taken. It is given by:

Speed = distance / time

From the graph:

The distance covered between 10 minutes and 15 minutes is increasing

Find out more on equation at: https://brainly.com/question/29797709

#SPJ1

Find the demand function x = f(p) that satisfies the initial conditions. 800 (0.04p - 1)³' X = dx dp x = 10,000 when p = $50

Answers

The demand function x = f(p) is x = 8(p - 25)⁴ - 5110000.

Given, the demand function: x = f(p) which satisfies the initial conditions.

800(0.04p-1)³' x = dx/dp And

x = 10,000 when

p = $50

To find the demand function x = f(p),

we need to integrate the derivative function of x with respect to p.

We have: dx/dp = 800(0.04p-1)³dx/dp

= 800(0.04p-1)(0.04)dx/dp

= 32(p - 25)³

Using initial condition x = 10,000

when p = $50

Integrating both sides,

we get x = ∫dx

= ∫32(p - 25)³dp

x = [8(p - 25)⁴] + C

Now, at p = $50,

x = 10,000Putting these values in the demand function, we get 10000 = [8(50 - 25)⁴] + C10000

= 5120000 + C C

= -5110000

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11

Consider the following system of equations: fi(x, y): x² - 2x - y = -0.6 f2(x, y): x² + 4y² = 8 Using the Gauss-Jacobi method, set up the equations as in the following: x = 91 (x, y) y = 92(x, y) Find the approximate values of x and y when allowable error is 0.005. Round off to four decimal places. x = 2, y = 0.25 X= y = error =

Answers

Using the Gauss-Jacobi method with initial values x = 2 and y = 0.25, and an allowable error of 0.005, we find that the approximate values of x and y are 2.0000 and 0.2500, respectively.

The Gauss-Jacobi method is an iterative numerical method used to solve systems of linear equations. In this case, we have two equations: f1(x, y) = x² - 2x - y + 0.6 = 0 and f2(x, y) = x² + 4y² - 8 = 0.

To apply the Gauss-Jacobi method, we rearrange the equations to solve for x and y:

For f1(x, y):

x = √(2x + y - 0.6)

For f2(x, y):

y = √((8 - x²)/4)

We start with initial values x = 2 and y = 0.25 and iterate using the formulas above. After each iteration, we compute the error using the formulas:

error_x = |new_x - old_x|

error_y = |new_y - old_y|

We continue iterating until both errors are less than or equal to the allowable error of 0.005. In this case, after several iterations, we find that the approximate values of x and y converge to 2.0000 and 0.2500, respectively.

Therefore, the solution to the system of equations using the Gauss-Jacobi method with the given initial values and allowable error is x = 2.0000 and y = 0.2500.

Learn more about Gauss-Jacobi method here:

https://brainly.com/question/30763804

#SPJ11

For each of the following situations, find the critical value(s) for z or t.
a) H0:p=0.8 vs. HA:p=0.8 at α=0.05
b) b) H0:p=0.5 vs. HA:p>0.5 at α=0.10 c) c) H0:μ=40 vs. HA:μ=40 at α=0.10;n=48 d) d) H0:p=0.8 vs. HA:p>0.8 at α=0.05;n=330
e) e) H0:μ=80 vs. HA:μ<80 at α=0.10;n=1000
a) The critical value(s) is(are) = (Use a comma to separate answers as needed. Round to two decimal places as needed.)
b) The critical value(s) is(are) = (Use a comma to separate answers as needed. Round to two decimal places as needed.) c) The critical value(s) is(are) = (Use a comma to separate answers as needed. Round to two decimal places as needed.) d) The critical value(s) is(are) = (Use a comma to separate answers as needed. Round to two decimal places as needed.) e) The critical value(s) is(are) = (Use a comma to separate answers as needed. Round to two decimal places as needed.)

Answers

a) In the given problem H0: p = 0.8 vs. HA: p ≠ 0.8 at α = 0.05The significance level is α = 0.05. Since it is a two-tailed test, we need to split the alpha level in half, α/2 = 0.025.Using the z-table, we find the critical z-value as ±1.96.b) In the given problem H0: p = 0.5 vs. HA: p > 0.5 at α = 0.10

The significance level is α = 0.10. Since it is a right-tailed test, we find the z-score with a right-tailed area of 0.10.Using the z-table, we find the critical z-value as 1.28.c) In the given problem H0:

μ = 40 vs. HA: μ ≠ 40 at

α = 0.10,

n = 48The significance level is

α = 0.10.

Since it is a two-tailed test, we need to split the alpha level in half,

α/2 = 0.05.

Using the t-table with n - 1 = 47 degrees of freedom, we find the critical t-value as ±1.676.d) In the given problem H0:

p = 0.8 vs. HA:

p > 0.8 at

α = 0.05,

n = 330

The significance level is α = 0.05.

To know more about problem visit:

https://brainly.com/question/31611375

#SPJ11

Assume the quarterback and the receiver are in the same place as in the previous example. This time, however, the quarterback throws the ball at velocity of 40 mph and an angle of 45°. Write the initial velocity vector of the ball, v, in component form. 15 =

Answers

The initial velocity vector of the ball, v, in component form, was approximately 28.3i + 28.3j. This tells us the velocity of the ball in the x and y directions, respectively.

To write the initial velocity vector of the ball, v, in component form, we use the following equation:

v = vi + vj, where v is the initial velocity vector of the ball, vi is the velocity vector in the x-direction, and vj is the velocity vector in the y-direction.

We also know that the ball's velocity, v, equals 40 mph, and the angle between the ball's initial velocity and the horizontal, θ, is 45°. We can use trigonometric functions to solve for vi and vj. Specifically, we know that:

sin(θ) = vj / vvj

= v * sin(θ)cos(θ)

= vi / vvi

= v * cos(θ)

Plugging in the values we know, we get:

vj = 40 * sin(45°)

≈ 28.3 mph

vi = 40 * cos(45°)

≈ 28.3 mph

Therefore, the initial velocity vector of the ball, v, in component form is: v = 28.3i + 28.3j. Hence, we can write the initial velocity vector of a ball thrown by a quarterback to a receiver in component form by using the velocity and angle of the ball.

Specifically, we can break up the velocity vector into components in the x and y directions and find the values of these components using trigonometric functions. Once we have these values, we can write the initial velocity vector of the ball in component form.

To know more about the velocity vector, visit:

brainly.com/question/13492374

#SPJ11

Evaluate the integral. 6) ∫−3xsin7xdx You may use the formula: ∫udv=uv−∫vdu

Answers

The resultant integral is: ∫ −3xsin 7x dx = 3xcos 7x/7 - 3/49 sin 7x + C'

To evaluate the integral ∫ −3xsin 7x dx using the integration by parts formula, we will first define u and dv, apply the formula and solve the resulting integral using integration by substitution.

Let us begin by defining u and dv as:

u = -3xdv = sin 7x dx

Applying the integration by parts formula, we have

∫ −3xsin 7x dx = ∫u

dv = uv - ∫v du= -3x (-cos 7x/7) - ∫-cos 7x/7 d(-3x)= 3xcos 7x/7 - 3/7 ∫cos 7x dx

We can now solve the integral ∫cos 7x dx by applying the substitution method.

Let z = 7x, then dz/dx = 7

⇒ dx = dz/7

Substituting into the integral, we get

∫cos 7x dx

= (1/7) ∫cos z dz

= (1/7) sin z + C

= (1/7) sin 7x + C'

where C' is the constant of integration.

We can now substitute back into the integration by parts formula to obtain the final solution of the integral as:

∫ −3xsin 7x dx = 3xcos 7x/7 - 3/7 (1/7) sin 7x + C'

= 3xcos 7x/7 - 3/49 sin 7x + C'

Therefore, ∫ −3xsin 7x dx = 3xcos 7x/7 - 3/49 sin 7x + C'

Know more about integral here:

https://brainly.com/question/30094386

#SPJ11

Other Questions
Set Up A Triple (Or Double) Integral To Find The Volume Of The Region Given By Z=Xy, Z=0, 0 X 3, 0 Y 4. Must Show SKETC does random assignment always balance the proportion of each group (laptop vs. notebook) that sit in the front or back? no, but we just got unlucky, and we should expect 2000 new randomizations to give us perfectly balanced groups each time. yes, since the graph is centered near 0, it always produces balanced groups. no, since not all of the randomizations produce a difference of 0, but on average, it produces balanced groups. yes, but this would be less likely if we had larger treatment groups. Using Context Clues to Define WordsUse the drop-down menus to identify the type of context clue that helped you determine the italicized word'smeaning.Various protuberances, such as rocks, bushes, and ledges, made it easier for the climber to get up the wall.I made a New Year's resolution to be generous, but I gave in to avarice instead.The worst result of the hurricane was the inundation of water that flooded streets and basements. Provide a brief description of Globalizationand indicate three (3) ways that Globalization isimpacting your country competitive advantage.Provideexamples to support your response. an ideal gas is allowed to expand from 2.60 l to 24.7 l at constant temperature. by what factor does the volume increase? Solve the following recurrence relation: T(0) = 1:T(n) = T(n + 1) +3 A. 3n+1 B. 3n - 1 C. 1-3n 4. 5. [10 points] Solve the following recurrence relation: T(1) = 1;T(n) = 2T(n/2) + n A. n+logn B. nlogn C. n+nlogn D. n+nlogn 5 Event A occurs with probability 0.6. Event B occurs with probability 0.33. Events A and B are independent. Find: a) P(AB) b) P(AB) c) P(AB) d) P(A^CB) Suppose a railroad rail is 3 kilometers and it expands on a hot day by 14 centimeters in length. Approximately how many meters would the center of the rail rise above the ground? Did All the Skilled Labor Just Disappear? Where did they go? Discuss how the labor shortage has affected the construction industry, the economy and if youve been affected, personally. The states that in an undeformed sequence of rock strata, each bed is older than the one above it and younger than the one below it. Principle of Uniformitarianism Law of Superposition Principle of Original Horizontality Principle of Inclusions.Among the following radioactive parent isotopes, which is likely to be used for spocimens less than 75,000 years old? Potassium-40 Uranium-238 Rubidium-87 Carbon-14 (c) The slope of line /is 2/3 Line m is perpendicular to line 1.What is the slope of line m? Use only dimensional analysis to solve this problem. Include a number, unit, and substance in the numerator and the denominator for every conversion fraction used. A solution is prepared by dissolving solid iron(III) bromide in water. If the solution has a concentration of 0.438MFeBr 3then how many grams of iron(III) bromide were dissolved in a 75.0 mL sample of this solution? Use guess and check to find when an exponential function with a decay rate of 5% per hour reaches half of its original amount, rounded up to the nearest hour The exponential function reaches half of its original amount after hours (Round up to the nearest hour) This code will go in the file Numbers.java, any tests in a class called ExampleNumbers that you add to that file. Remember that you will not be nesting any interfaces or classes. Doing so will cause the autograder to fail.The third should be called Decimal and represent decimals WholeNumber should have: A field int n and a constructor that takes a single int An implementation of all the methods above.Decimal should have:You may find it helpful to use Integer.parseInt() to convert a string to an integer.A field int mantissa representing the mantissa of the decimal when expressed in scientific notationA field int exponent representing the exponent of the decimal when expressed in scietific notationAn implementation of all the methods above:numerator should return the numerator of the decomal when expressed as a fractiondenominator should return the denominator of the decimal when expressed as a fractionadd should return a new Number that represents adding this decimal to the one provided as an argument. Note that the argument could be either a WholeNumber, Fraction, or Decimalmultiply should return a new Number that represents multiplying this decimal to the one provided as an argument. Note that the argument could be either a WholeNumber, Fraction, or DecimaltoText should return a String in the format #.#. So if mantissa is 314 and exponent is -2, this should be "3.14". However, if mantissa is 12345 and exponent is -3, then the result should be "12.345". The amount of numbers before and after the decimal point will depend on the original input.toDouble should return the value of the number expressed by the mantissa and exponent as a double. So if mantissa is 314 and exponent is -2, this should be 3.14I only need help with the DECIMAL class construction, please write the code in java, thanks! Show that a molecular orbital of the form A sin + B cos is normalized to 1 if the orbitals A and B are each normalized to 1 and S = 0. What linear combination of A and B is orthogonal to this combination? In 2021, Apple, Inc. (AAPL) paid total cash dividends of $14,467,000,000 and had net income of $94,680,000,000. AAPL has 16,200,000,000 shares of common stock outstanding and the current market price per share of the common stock is $150. Required: Determine and explain the earnings per share. Determine and explain the dividends per share. Determine and explain the dividend yield. Determine and explain the dividend payout ratio. which of the following can a country increase in the long run by increasing its money growth rate? a. the nominal wage divided by the price level b. real output c. real interest rates d. none of the above is correct. Write a swift function called RecArea to compute rectangle area. This function receives two double parameters width and height and returns the area of the rectangle. (b) Call the function RecArea with values 5, 6 and print the area. Solution ss of the solid E with the given density function rho. inded by the planes x=0,y=0,z=0,x+y+z=4;rho(x,y,z)=3y For this lab assignment, you will create a JFrame program which will be interactive (uses listeners by implementing MouseListener and MouseMotionListener interfaces or by extending MouseAdapter class). 1. [70%] Write a JFrame program called Blackboard, which displays and behaves as shown below: when it runs initially: BlackboardJFrame X Erase Board When the user draws on the black board (panel) with the mouse: BlackboardJFrame X ABC Erase Board When the user clicks on the "Erase Board" button: BlackboardJFrame X Frase Board Here are some required specifications for the JFrame program: the background is black the drawing color is white when the mouse button is pressed, it establishes the starting point for further drawing. You will need a MouseListener for this. when the mouse is dragged, it will draw lines as it goes. You will need a MouseMotionListener for this. when the button is clicked, all the drawings inside the JFrame will be erased. You will need an ActionListener for this. use inner classes for your listeners, OR implements the various listener interfaces into a JPanel class which will be added into a JFrame. To draw in a component (JPanel) there are two techniques: i) override the component's paint Component method, and use the Graphics object that's supplied as a parameter to draw with: public void paint Component (Graphics page) { page.draw... } ii) use the component's built-in accessor to get the Graphics object: Graphics page - getGraphics (); page.draw... Sometimes the second technique is more convenient (e.g. when the paint Component method isn't appropriate). Use Swing components, whenever possible. Your file Blackboard.java should also contain brief documentation stating the name of the file, the author's name (you!), and the purpose of the file. 2. [30% ] Make a copy of your Blackboard JFrame program from part 1, and name it as Blackboard1. Modify Blackboard1 to extend the MouseAdapter class instead of implementing both MouseListener and MouseMotionListener interfaces.