Calculate the amount (in mol ) in 8.80g of carbon dioxide CO2

The name of the medicine to be prescribed, its dosage or strength, or the names and dosages of each ingredient to be added to a compound are all listed in the body of such prescription, or inscription.

A prescription is a piece of paper around which your doctor orders medication and which you provide to a pharmacist or chemist in order to obtain the medication. You must visit a pharmacy with your prescription. 2. A noun that counts.

Simple prescriptions are those that are written for only a single component as well as prefabricated product and don't need the pharmacist to compound or admix it. 2. Compound or complicated prescriptions: Those that need compounding and are written for some more than one component.

To know more about prescription visit:

https://brainly.com/question/1447175

#SPJ4

2.89 moles of gas escaped from the system.

What is ideal gas law ?

The ideal gas law (also called the perfect gas law), the relationship between the pressure P, volume V, and temperature T of a gas in the boundary region between low pressure and high temperature. Gas molecules move almost independently. each other. In such cases, all gases obey an equation of state known as the ideal gas law:

PV = nRT, where n is the number of moles of gas, R is the universal (or complete) gas constant, 8.31446261815324 Joules/ Kelvin/Kelvin (The universal gas constant is defined as Avogadro's number NA multiplied by Boltzmann's constant k.) In the International System of Units, energy is joules, volume is cubic meters (m3), force is newtons (N), and pascals Pressure in (Pa), where 1Pa = 1N/m2. A force of 1 Newton moving a distance of 1 meter does 1 Joule of work. Therefore, the product of both PV and nRT has the dimension of work (energy).

n1=12.11

n2 =15

escaped gas moles = n2-n1=2.89

To learn more about ideal gas law , click the link below ;

https://brainly.com/question/21912477

#SPJ4

When cations and anions in an aqueous solution react to generate a precipitate, an insoluble ionic solid, precipitation processes take place.

The solubility principles for typical ionic solids can be used to determine whether or not such a reaction takes place. Before figuring out the condition of the products and creating a net ionic equation, one must refer to the solubility criteria because not all aqueous reactions produce precipitates. Scientists are able to identify the ions that are present in a solution because to the capacity to forecast these reactions, and industries are able to create compounds by taking components from these reactions. When specific cations and anions combine in an aqueous solution, precipitates are insoluble ionic solid products of the reaction. The variables that affect how a precipitate forms can be different.

Learn more about reactions here-

https://brainly.com/question/28984750

#SPJ4

The value of the gas constant will be high due to the increase in gas pressure.

Solution:

According to Ideal Gas Law, PV=nRT

where, P = Gas pressure (in atmospheres),   V= Gas Volume (in Liters),  n = number of moles of gas sample T=  Gas Temperature (in Kelvins), R = Gas Constant.

[tex]\therefore R=\frac{(P\ast V)}{(n\ast T)}[/tex] ....... (1)  

P = [tex]P_{atm}[/tex] - [tex]P_{water vapor}[/tex]

where = Atmospheric pressure[tex]P_{water vapor}[/tex] = Partial pressure of water vapor.

If students forgot to include the vapor pressure of water in the calculation of gas constant then the magnitude of pressure due to gas(P) will be more because they are not substracting the Water vapor value from the [tex]P_{atm}[/tex]to get the actual P value.

The value of the gas constant will be high due to the increase in gas pressure.

The ideal gas constant R can be found experimentally by determining the number of moles of gas occupying a given volume of measurement at a known pressure and temperature. This information is obtained in this laboratory by collecting the oxygen produced by the decomposition of potassium chlorate over water. The water level inside the tube should match the water level outside the tube.

Learn more about The vapor pressure here:-https://brainly.com/question/4463307

#SPJ1

Rotation refers to the movement of an object rotating around its own axis. Rotation refers to the orbital motion of an object around another object.

When the earth rotates it moves or revolves around the sun. The Earth's orbit around the Sun is called an orbit. It takes one year or 365 1/4 days for the Earth to make a complete orbit around the Sun. The moon revolves around the earth as the earth revolves around the sun. This is because the earth accelerates and decelerates as it orbits the sun.

Most of the apparent motion of the Sun comes from the Earth's rotation. As our planet rotates, the sun, moon, and all the stars appear to move from east to west, as if they were spinning in an office chair, while the walls all move in the opposite direction. It looks like you are. It is important to understand the difference between twists and turns. Rotating an object around its internal axis is called rotation. When an object orbits its outer axis it is called rotation.

Learn more about Rotation here:-https://brainly.com/question/26249005

#SPJ1

The bleach was in excess compared to the dye in the reaction between bleach and dye.

In the textile business, bleach is used to bleach cotton and linen. It is also used to bleach wood pulp in the paper industry and to bleach laundry.

It is the primary component of a solution that contains between 3 and 6 percent sodium hypochlorite (NaOCl), along with trace amounts of sodium hydroxide, hydrogen peroxide, and calcium hypochlorite.

A form of base that works particularly well at eliminating stains and colors is chlorine bleach.

A plot of ln(Abs) vs. time shows a straight line, indicating that the order with regard to the dye is "first order." The sequence of the reaction with respect to the bleach can be determined by looking at the rate constants and bleach volume.

To know more about  bleach visit:

https://brainly.com/question/28907871

#SPJ4

Kp is the equilibrium constant of the reaction in accordance with the partial pressure of the gas. The mass percentage of calcium carbonate is 2.5%.

What is the mass percentage?

The mass percentage is the ratio of the moles reacted to that of the moles present initially multiplied by  100.

The reaction of calcium carbonate can be shown as,

CaCo3 ----------------->  CaO   + CO2

The formula for the equilibrium constant is given as,

Kp= Kc[tex](RT)^{n}[/tex]

Here,

n = 1

Gas constant (R) = 8.314 J /mol K

Temperature (T) = 1073 K

Kp = 1.16

      = 1.3 x [tex]10^{-4}[/tex]

Substituting values in the above equation:

             x =0.005

From the ICE table of the reaction the value of moles of calcium carbonate (x) is calculated as:

Mass% = 0.005/0.2x 100%

              2.5%

Therefore, 2.5% is the mass percentage.

Learn more about mass percentage from given link

brainly.com/question/13973333

#SPJ4

The given question is incomplete and the complete question is

A sample of 0.0606 mol of iron(III) chloride FeCl₃ was dissolved in water to give 35.4 mL of solution. What is the molarity  of the solution?

The molarity of the solution is 0.0017 mol/L

The molarity or concentration can be described by using the moles of the solute per liter of known aqueous solution and which is the volume the molarity also is designated as molar concentration

Here given data is

Iron(III) chloride = 0.0606 mol

Water means volume = 35.4 mL

We have to find molarity of the solution = ?

Molarity = moles of solute/volume of solution

Molarity =  0.0606 mol / 35.4 mL

Molarity = 0.0017 mol/L

Know more about iron(iii) chloride

https://brainly.com/question/28289271

#SPJ4

In the reaction of 30.0 g of propane and 75.0 g of oxygen, oxygen is the limiting reagent.

The chemical equation of the reaction of propane and oxygen is as follows,

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

Here, 30 grams of propane reacts with 75 grams.

Step 1- First find the moles of oxygen and propane.

Moles of propane = mass/molar mass

Moles of propane = 44/30

Moles of propane = 1.21 moles.

Now, moles of oxygen = 75/18

Moles of oxygen = 4.16 moles.

Step2- compare the moles,

Now, we see, as per the reaction, for every one mole of propane. there should be 5 moles of oxygen, hence,

1 mole propane = 5 moles oxygen

1.21 moles propane = 6.05 moles of oxygen.

So, 6.05 moles of oxygen are required but we have only 4.16 moles, so, here, oxygen is the limiting reagent.

To know more about Limiting reagent, visit,

https://brainly.com/question/26905271

#SPJ4

In noncyclic photophosphorylation, electrons flow in a one way path from water to NADP

Non cyclic photophosphorylation process which result in the movement of the electron in a non cyclic manner for synthesizing ATP molecule using the energy from excited electron provided by photosystem 2 us called as non cyclic photophosphorylation

And during non cyclic photophosphorylation the electron released by P700 are carried by primary acceptors and are finally passed on the NADP and the electron combine with the proton H⁺ which is produced by splitting up of the water molecule and reduced NADP to NADPH₂ and this process require light to be absorbed twice

Know more about electrons

https://brainly.com/question/15039729

#SPJ4

Answer: Japenease pls

Explanation:

If HA represents a weak acid, The equilibrium corresponds to the equilibrium constant kb for the conjugate base, A⁻ is

A⁻    + H₂O ⇄  HA  +  OH⁻

Kb = [HA] [OH⁻] / [A⁻]

According to Bronsted lowery , the acids are those which donates the H⁺ ion. The specie which accept the proton is called as base. the conjugate acid and the conjugate base is the which differ by a proton.

The equation is given as :

A⁻    + H₂O ⇄  HA  +  OH⁻

The equilibrium constant Kb is given as :

Kb = [HA] [OH⁻] / [A⁻]

Thus, If HA represents a weak acid, The equilibrium corresponds to the equilibrium constant kb for the conjugate base, A⁻ is

A⁻    + H₂O ⇄  HA  +  OH⁻

Kb = [HA] [OH⁻] / [A⁻]

To learn more about conjugate base here

https://brainly.com/question/12883745

#SPJ4

The temperature of a material when it undergoes an endothermic change remains constant. The heat added to the material is used to overcome intermolecular forces.  

What is endothermic reaction?

The endothermic reaction is a type of reaction where the reactants of the system absorb the heat energy from the surroundings to form the products. Example for an endothermic reaction is the melting of ice cube.   Sublimation, vaporization and melting can also be considered as examples for endothermic reactions.

The heat energy supplied to the material is basically used to break the bonds between the molecules. So there is no change in the kinetic energy of the molecules in endothermic reactions.

Therefore, in endothermic reactions, the temperature of a material when it undergoes an endothermic change remains constant due to the energy being used in breaking the bonds. So no increase in kinetic energy can be observed.

To learn more about endothermic reaction click on the given link https://brainly.com/question/6506846

#SPJ4

The functional group that is formed when an aldehyde and an alcohol are mixed together in the presence of a catalytic amount of acid will be an Acetal.

Aldehyde may be defined as the functional group having the suffix as -al and represented as RCHO. In this functional group the carbon atom is in double bond with the oxygen atom satisfying the valency of each atom. Alcohols are functional groups having the suffix as -ol and represented as ROH. They are very important and have many characteristic features. Acetals are functional groups in which the carbon atom is bonded with two -OR groups. They are produced when alcohol and aldehyde are mixed in presence of Hydrochloric acid. If the reaction takes place without the presence of HCl, then Hemiacetal will be formed that is carbon atom will have one -OR group.

Learn more about Aldehydes at:

brainly.com/question/24344366

#SPJ4

The equation associated with the lattice energy of the compound is: -

Li2O (s)---->2 Li+ (g) + O2- (g)

Lattice energy is defined as the energy required for the conversion of one mole of ionic solid constituents to ionic gaseous constituents. Lattice energy is a measure of the strength of the ionic bonds in an ionic compound.

       It provides insight into several properties of ionic solids including their volatility, their solubility, and their hardness.

     The lattice energy of an ionic solid cannot be measured directly. However, it can be estimated with the help of the Born-Haber cycle. Generally, this quantity is expressed in terms of kilojoules per mole (kJ/mol)

      Lattice energy gives us the idea for the entire reaction and its compounds.

Learn more about lattice energy at,

https://brainly.com/question/2240714

#SPJ4

Florine (f) has the highest boiling point of the halogen elements

The boiling point of a compound is influenced by several factors including Mr and intermolecular bonds. The greater the Mr and the intermolecular bonds. The bigger the Mr, the higher the boiling point. For acid halides, the order of boiling points from highest to lowest is:

HF>HI>HBr>HCl

In HF compounds the influence of intermolecular bonds is very strong.

The trend of the melting and boiling points of the halogens can be explained as follows.

The halogen molecule (X2) is nonpolar, thus the attraction between halogen molecules is a dispersion force. As is known, the dispersion force increases in accordance with the increase in molecular mass (Mr). That is why the melting and boiling points of the halogens increase from top to bottom in the periodic table of elements.

#SPJ4

Answer:

Explanation:

The bonding in NaCl involves a sodium ion and a chloride ion while the bonding in sodium metal involves sodium ions and a sea of electrons.

NaCl involves sodium and ion and chloride ion held together by an ionic bond. The sodium atom transfers an electron to chlorine atom to yield the chloride ion. This ion pair exists in the compound called sodium chloride.

In sodium metal, the sodium cations interact electrostatically with a sea of electrons in a metallic bond. Hence, while the bonding in sodium chloride involves an ion pair, the bonding in sodium metal involves sodium ions and a sea of electrons.

Rsa and diffie-hellman are two protocols that tls is capable of using for key exchange.

TLS encrypts the TCP header and payload. The packet payload stays encrypted the entire way since encryption is done in the protocol on one end system and decryption in the protocol on the other end system.

Both IPv4 and IPv6 networks use IPsec to authenticate and encrypt data packets. A packet's IP header contains IPsec protocol headers, which specify how a packet's contents are handled, including how it is delivered across a network and routed.

To know more about key exchange visit:-

https://brainly.com/question/4335377

#SPJ4

The nuclear equation for decay of rubdium-87 by the emission of single beta particle is [tex]^{87}Rb_{37}[/tex] >>> [tex]^{87}Sr_{38}[/tex] + [tex]^{0}e_{-1}[/tex]

There are 36 isotopes of rubidium (37Rb), but only two of them are present in naturally occurring rubidium: 85Rb (72.2%), and the radioactive 87Rb (27.8%). Rubidium is radioactive enough in normal rubidium mixes to fog film in around 30 to 60 days.

The half-life of 87Rb is 4.92 1010 years. It is fairly common because it easily replaces potassium in minerals. Numerous rock samples have been dated using 87Rb, which decays to stable strontium-87 by the emission of a beta particle. Sr tends to concentrate in plagioclase during fractional crystallization, leaving Rb in the liquid phase.

For more information on radioactive decay kindly visit to

https://brainly.com/question/14921881?referrer=searchResults

#SPJ4

They would all exhibit the same pressure. The same number of moles of each gas are put in various containers, thus the gas will take up the same amount of space.

We could see the gases at the same temperature now. Since their volumes are equal, they will all have the same pressure. Now, by performing the following straightforward math, we can better comprehend this:

For H2:

Number of mole (n) = 1 mole

Volume (V) = 22.4L

Temperature (T) = 298K

Gas constant (R) = 0.0821 atm.L/Kmol

Pressure =..?

PV = nRT

Divide both side V

P = nRT /V

P = 1 x 0.0821 x 298 / 22.4

P = 1 atm

Therefore, H2 has a pressure of 1 atm.

For N2:

Number of mole (n) = 1 mole

Volume (V) = 22.4L

Temperature (T) = 298K

Gas constant (R) = 0.0821 atm.L/Kmol

Pressure =..?

PV = nRT

Divide both side V

P = nRT /V

P = 1 x 0.0821 x 298 / 22.4

P = 1 atm

Therefore, N2 has a pressure of 1 atm

For O2:

Number of mole (n) = 1 mole

Volume (V) = 22.4L

Temperature (T) = 298K

Gas constant (R) = 0.0821 atm.L/Kmol

Pressure =..?

PV = nRT

Divide both side V

P = nRT /V

P = 1 x 0.0821 x 298 / 22.4

P = 1 atm

Learn more about pressure:

https://brainly.com/question/25736513

#SPJ4

    choline has different ionization energies in CCl4CCl4Cl, it is more electronegative than C and has a negative oxidation number because it “picks up” an electron in a bond, and in HClOHClO, it is less electronegative than O Therefore, it has a positive oxidation number. Hence "lose". "Electrons in bonds

To learn more about oxidation click

https://brainly.com/question/493182?referrer=searchResults

(a) belongs to Group IIA.

(b) belongs to  Group XVIA.

(c) belongs to Group IA.

Ionic compounds are made up of charged particles called ions, which form when an atom (or group of atoms) gains or loses an electron. Cations are positively charged ions, whereas anions have a net negative charge. Covalent or molecular compounds are produced when two elements join together to form molecules and share electrons.

Part (a): X must be a metal for the compound XF2. Since there are two fluorine atoms and fluorine is a monovalent element, X must have a valency of two.

X thus belongs to group 2 as a result.

Part (b): X must not be a metal in the complex MgX. Given that magnesium is divalent and only contains one magnesium atom, X must have a valency of two.

X thus belongs to group 16 as a result.

Part (c): X must be a hydrogen atom or a metal for the compound X2SO4. Given that there are two X atoms and that sulfate is divalent, X must have a single valency.

X thus belongs to group 1 as a result.

To know more about ionic compound visit:

https://brainly.com/question/9597623

#SPJ4

The concentration of hydrogen ions increases as a result of a series of chemical reactions that take place when CO2 is absorbed by saltwater.

The seawater's acidity rises as a result, and carbonate ions become relatively less common. Seawater absorbs carbon dioxide, which is present naturally in the atmosphere. Carbonic acid (H2CO3) is created when water and carbon dioxide mix. This weak acid dissociates into hydrogen ions (H+) and bicarbonate ions (HCO3-). Carbonate from the sea is used by marine life to create their shells and skeletons. Carbonate is less readily available for animals to build their shells and skeletons as seawater becomes more acidic. Shells and skeletons may dissolve in highly acidic environments.

Learn more about reactions here-

https://brainly.com/question/28984750

#SPJ4

A barium and a krypton nucleus were found in two incredibly unstable fission pieces. These pieces very instantly split into barium-144 and krypton-89 after releasing three neutrons each.

The main fissile elements are uranium-235 (0.7 percent of naturally occurring uranium), plutonium-239, and uranium-233, the latter two being synthesised from uranium-238 and thorium-232, respectively, which are fertile elements.

A reactor may be fueled with a variety of materials, although uranium is the most often utilised fuel. Oceans contain uranium, which is widely distributed around the earth and is also rather abundant. You can also utilise other fuels, such thorium and plutonium.

Today, uranium is utilised to generate energy from commercial nuclear reactors and to create isotopes for use in industry and medicine.

learn more about fission refer

https://brainly.com/question/114533

#SPJ4

35g

Noting the mass of scientific tools such as beakers can help us take the mass of liquids and other samples that cannot be measured on their own.

Mass of the Liquid

To find the mass of the liquid, we have to know the mass of the beaker. Then, we can subtract the mass of the beaker from the mass of the liquid and beaker combined. This will leave the mass of the liquid.

The liquid has a mass of 35g.

Significant Figures and Units

Whenever doing scientific calculations, it is important to include significant figures and units.

Significant figures show the accuracy of a measurement. When, subtracting numbers, round to the smallest number of decimal places. Neither measurement has decimal points, thus the answer also should not have a decimal point. Thus the answer is just 35.

Then, make sure you have units. Since the original measurements are in grams, the answer should also be in grams. So, the final answer is 35 grams.

The total number of valence electrons in NBr₃ is 26 valence electrons.

The given molecule is nitrogen tribromide ,  NBr₃

no. of nitrogen atoms in  nitrogen tribromide is 1 . nitrogen atomic number is 7 , the number of electrons in the valence shell = 5

total number of valence electron in nitrogen = 1 × 5 electrons = 5 electrons

number of bromine atom in  nitrogen tribromide is = 5. bromine atomic number is 35 , number of electrons in the outermost shell = 7

total no. of valence electron in bromine = 3 × 7 = 21

Total number of valence electrons in the molecule, NBr₃

NBr₃ = 5 electrons + 21 electrons = 26 electrons.

Thus, The total number of valence electrons in NBr₃ is 26 valence electrons.

To learn more about valence electrons here

https://brainly.com/question/13993867

#SPJ9

CaBr₂ (aq) + Na₂SO₄ (aq) ⟶ 2NaBr (aq) + CaSO₄ (s) is the correct equation.

Salt metathesis reactions, also called double displacement reactions, are chemical processes that involve the exchange of bonds between two reacting chemical species, resulting in the formation of products with similar or identical bonding relationships.

Exchange of ions among the reactants in order to form two new compounds is the reason that the reactions are known as double displacement. Double displacement reactions usually result in the formation of products that are precipitates. The double displacement reaction takes the form:

AB + CD → AD + CB

The precipitate is in the solid state and is distinguished from other products so that it can be separated or removed from the reaction

To know more about double displacement reaction visit:

https://brainly.com/question/20038776

#SPJ4

Since the given question is incomplete, the complete question is as follows:

"Determine the type of each chemical equation describing a precipitation reaction. C a 2 + ( a q ) + S O 4 2 − ( a q ) ⟶ C a S O 4 ( s ) Choose... C a B r 2 ( a q ) + N a 2 S O 4 ( a q ) ⟶ 2 N a B r ( a q ) + C a S O 4 ( s ) Choose... C a 2 + ( a q ) + 2 B r − ( a q ) + 2 N a + ( a q ) + S O 4 2 − ( a q ) ⟶ 2 N a + ( a q ) + 2 B r − ( a q ) + C a S O 4 ( s ) Choose..."

When the element comes near an atom having seven valence electrons, no reaction will occur.

The name of the element is Neon.

The electron configuration of elements shows how the total number of electrons present in the atoms of the elements are arranged in the orbitals around the nucleus.

In other words, the electron configuration of elements indicates the total number of electrons on its neutral atom, and hence the atomic number of elements.

In this case, the electron configuration is [tex]1s^2 2s^2 2p^6[/tex]. The total number of electrons is 10. Hence, the atomic number of the element is 10. The element with atomic number 10 is Neon (Ne).

Neon represents one of the inert elements on the periodic table. They possess octet electron configuration and as such, are not reactive ordinarily. Thus, if an atom of neon comes near an atom with seven valence electrons, no reaction will occur.

More on electron configurations can be found here: https://brainly.com/question/14283892

#SPJ1

Stirring is only required to dissolve sucrose sugar in water.

What is solubility?

Solubility in chemistry refers to a chemical's capacity to dissolve in another substance, the solvent, to produce a solution. The opposite characteristic, insolubility, refers to the solute's incapacity to create a solution. The solvent is often a solid or a liquid, whereas the solute may be a solid, liquid, or gas. Both could be solution-based compounds or pure chemicals. Except in extremely rare circumstances, gases are always miscible in all ratios, and the only way a solid or liquid may be "dissolved" in a gas is by first becoming gaseous.

Temperature, pressure, and the makeup of the solute and solvent (including their pH and the presence of additional dissolved materials) are the key determinants of solubility.

Hence, stirring is only required to dissolve sucrose sugar in water.

To know more about dissolution from the given link

https://brainly.com/question/1493341

#SPJ4