Calculate the amount of C in 0.600g of CO2.

Answer:

[tex]15molH[/tex]

Explanation:

Hello,

In this case, given that one mole of glucose, contains six moles of oxygen (subscript), we can also see it contains twelve moles of hydrogen (subscript), therefore, the moles of hydrogen in the sample are computed by:

[tex]0.75molO*\frac{1molC_6H_{12}O_6}{6molO}*\frac{12molH}{1molC_6H_{12}O_6}\\ \\=1.5molH[/tex]

Best regards.

Answer:

A. Density of object = 0.86 g/mL

B. The object will float in the water.

Explanation:

The following data were obtained from the question:

Volume of water = 6.2 mL

Mass (m) of object = 1.2 g

Volume of water + Object = 7.59 mL

Density of object =?

Density of water = 1 g/mL

Next, we shall determine the volume of the object. This can be obtained as follow:

Volume of water = 6.2 mL

Volume of water + Object = 7.59 mL

Volume of object =?

Volume of object = (Volume of water + Object) – (Volume of water)

Volume of object = 7.59 – 6.2

Volume of object = 1.39 mL

Therefore, the volume of the object is 1.39 mL

A. Determination of the density of the object.

Mass (m) of object = 1.2 g

Volume (V) of object = 1.39 mL

Density (D) of object =?

Density = mass /volume

Density = 1.2/1.39

Density of object = 0.86 g/mL

B. Determination of whether the object will float or sink.

Density of object = 0.86 g/mL

Density of water = 1 g/mL

From the above, we can see that the density of water is greater than that of the object. This implies that the object is lighter than water. Therefore, the object will float in the water.

Answer:

Mass of copper is 500.542 g.

Explanation:

Initial temperature of copper = [tex]122^{0}[/tex]C

specific heat capacity of copper = 0.20 J/°C g

Mass of water = 500 g

Initial temperature of water = [tex]25.3^{0}[/tex]C

Specific heat capacity of water = 4.2 J/°C g

Final temperature of water and copper = [tex]29.7^{0}[/tex] C

Heat loss by copper = Heat gained by water

[tex]m_{c}[/tex][tex]c_{c}[/tex]Δ[tex]T_{c}[/tex] = [tex]m_{w}[/tex][tex]c_{w}[/tex]Δ[tex]T_{w}[/tex]

[tex]m_{c}[/tex] x 0.2 x (122 - 29.7) = 500 x 4.2 x (29.7 - 25.3)

[tex]m_{c}[/tex] x 0.2 x 92.3 = 500 x 4.2 x 4.4

[tex]m_{c}[/tex] x 18.46 = 9240

[tex]m_{c}[/tex] = [tex]\frac{9240}{18.46}[/tex]

     = 500.5417

mass of copper is 500.542 g.

Answer:

500.542

Explanation:

edge

Answer:

Explanation:

B

Answer:

0.015 mol HCL

Explanation:

Molarity = moles solute/liters solution

Step 1: Define variables

M = 0.200

L = 75.0 mL

m = unknown, x

Step 2: Convert mL to L

1000 mL = 1 L

75.0 mL/1000 mL = 0.075 L

Step 3: Substitute

0.200 M = x mol/0.075 L

Step 4: Find x

x = 0.015 mol HCL

Answer: SF6

Sulfur hexafluoride or sulphur hexafluoride, is an inorganic, colorless, odorless, non-flammable, non-toxic but extremely potent greenhouse gas, and an excellent electrical insulator. SF₆ has an octahedral geometry, consisting of six fluorine atoms attached to a central sulfur atom.

Answer:

Earth's gravitational pull

Explanation:

Astronauts in the space shuttle float because they are in “free fall” around Earth, just like a satellite or the Moon. Again, it is gravity that provides the centripetal force that keeps them in circular motion.

Answer:

The volume (mL) of 0.135 M NaOH that is required to neutralize 13.7 mL of 0.129 M HCl is 13.1 mL (option b).

Explanation:

The reaction between an acid and a base is called neutralization, forming a salt and water.

Salt is an ionic compound made up of an anion (positively charged ion) from the base and a cation (negatively charged ion) from the acid.

When an acid is neutralized, the amount of base added must equal the amount of acid initially present. This base quantity is said to be the equivalent quantity. In other words, at the equivalence point the stoichiometry of the reaction is exactly fulfilled (there are no limiting or excess reagents), therefore the numbers of moles of both will be in stoichiometric relationship. So:

V acid *M acid = V base *M base

where V represents the volume of solution and M the molar concentration of said solution.

In this case:

Replacing:

0.0137 L* 0.129 M= V base* 0.135 M

Solving:

[tex]V base=\frac{0.0137 L*0.129 M}{0.135 M}[/tex]

V base=0.0131 L = 13.1 mL

The volume (mL) of 0.135 M NaOH that is required to neutralize 13.7 mL of 0.129 M HCl is 13.1 mL (option b).

Answer:

1. Democritus - Matter was made of different kinds of things.

2. Bernoulli- Gases are formed from tiny particles so small you can’t see them. The particles are spread out into a certain area and move when people walk through them.

3. Priestley- Substances combine or break apart to create new, different substances.

Explanation:

1. Democritus was a philosopher who because of his immense contribution to atomic theory was regarded as the "FATHER OF SCIENCE". His idea was that matter was made of different kinds of things called which he called ATOMOS meaning ATOM.

2. Daniel Bernoulli was another outstanding mathematician and scientist who played a major part in the kinetic molecular theory of gases via his "HYDRODYNAMICA". His idea, which states that "gases are formed from tiny particles so small you can’t see them. The particles are spread out into a certain area and move when people walk through them"

was based on fluid dynamics.

3. Joseph Priestley is remarkably known for his 1774 discovery of oxygen. His findings that air is a mixture of gases and not just a substance made of one element paved the way for his idea that " Substances combine or break apart to create new, different substances".

Answer:

Mass by mass

Explanation:

Because it's telling only about mass in grams

Answer:

protons and neutrons are found in nucleus

Answer:

1068.8 g of N₂ are required.

We can also say, 1.07 kg of N₂

Explanation:

Let's apply the Ideal Gas Law equation to solve the problem:

Formula is  P . V = n . R . T

At STP we know, that P is 1 atm and T is 273.15 K. So let's replace the formula:

1 atm . 855 L = n . 0.082 L.atm /mol.K . 273.15 K

(1atm . 855L) / (0.082 L.atm /mol.K . 273.15 K) = n

38.17 moles = n

Let's convert the moles to mass, nitrogen is a dyatomic gas → N₂

Molar mass N₂ = 28 g/mol

38.17 mol . 28 g/mol = 1068.8 g of N₂ are required.

AT STP the 1 moles of gas is equal to the 22.4 L of gas. The mass of the nitrogen gas in the 855 L tank at STP is 1068 g.

The mass of the Nitrogen gas can be calculate using the formula,

[tex]\bold {w = n \times m}\\[/tex]

Where,

w -mass = ?

n - number of moles = [tex]\bold {=\dfrac {855}{22.4} = 38.169\ moles }[/tex] at STP.

m - molar mass  [tex]\bold {N_2}[/tex] =  

Put the values in the formula,

[tex]\bold {w = 38.169 \times 28 = 1068.73\ g}[/tex]

Therefore, the mass of the nitrogen gas in the 855 L tank at STP is 1068 g.

To know more about STP,

https://brainly.com/question/24050436

Answer:

Explanation:

Chemistry is the science that studies the composition, structure and properties of matter and the changes it undergoes during chemical reactions and their relationship with energy

Explanation:

Chemistry is the branch of science concerned with the substances of which matter is composed, the investigation of their properties and reactions, and the use of such reactions to form new substances.

Answer:

The velocity of the ejected electron from the ionized atom is 3.6 × 10⁵ m/s

Explanation:

Using the conservation of energy, we can write that

Photon energy (E) = Ionisation energy (I.E) + Kinetic energy (K.E)

Photon  energy, E = [tex]hf[/tex]

Where [tex]h[/tex] is Planck's constant ( [tex]h[/tex] = 6.626 × 10⁻³⁴ kgm²/s)

and [tex]f[/tex] is the frequency

Also,

Kinetic energy, K.E = [tex]\frac{1}{2} mv^{2}[/tex]

Where [tex]m[/tex] is mass

and [tex]v[/tex] is velocity

Hence, we can write that

[tex]hf = I.E + \frac{1}{2}mv^{2}[/tex]

But, [tex]c = f\lambda[/tex]

where [tex]c[/tex] is the speed of light ( [tex]c[/tex] = 3.0 × 10⁸ m/s)

and λ is the wavelength

∴ [tex]f = \frac{c}{\lambda}[/tex]

Then,

[tex]\frac{hc}{\lambda} = I.E + \frac{1}{2}mv^{2}[/tex]

From the question, the first ionisation energy of sodium is 496 kJ/mol

This is the ionisation energy for 1 mole of sodium,

For 1 atom of sodium, we will divide by Avogadro's constant

∴ The ionisation energy becomes

(496 KJ/mol) / (6.02 × 10²³ molecules)

= 8.239 × 10⁻¹⁹ J

This is the ionisation energy for one atom of sodium

Now, to determine the velocity of the ejected electron from the ionized atom,

From,

[tex]\frac{hc}{\lambda} = I.E + \frac{1}{2}mv^{2}[/tex]

Then,

[tex]\frac{6.626\times 10^{-34} \times 3.0 \times 10^{8} }{225 \times 10^{-9} } = 8.239 \times 10^{-19} + \frac{1}{2}(9.109\times10^{-31} )v^{2}[/tex]

[tex]8.835 \times 10^{-19} = 8.239 \times 10^{-19} + 4.5545 \times 10^{-31}v^{2}[/tex][tex]8.835 \times 10^{-19} - 8.239 \times 10^{-19} = 4.5545 \times 10^{-31}v^{2}[/tex]

[tex]5.96 \times 10^{-20} = 4.5545 \times 10^{-31}v^{2}[/tex]

[tex]v^{2} = \frac{5.96 \times 10^{-20}}{4.5545 \times 10^{-31}}[/tex]

[tex]v^{2} = 1.3086 \times 10^{11}[/tex]

[tex]v = \sqrt{1.3086 \times 10^{11} }[/tex]

[tex]v = 361745.77 m/s[/tex]

[tex]v = 3.6 \times 10^{5} m/s[/tex]

Hence, the velocity of the ejected electron from the ionized atom is 3.6 × 10⁵ m/s

Answer: My data strongly supported my hypothesis. I was right when guessed the solids density would be higher than the liquids and also that the mass affected the volume of the objects. The experiment proves that hypothesis is correct. To test further I could use different types of liquid and rocks with material.

When I predicted that solids would have a higher density than liquids and that mass would affect the volume of the objects.

I may use different sorts of fluids and rocks with stuff to test further.

Learn more about Chemistry experiments here:-

https://brainly.com/question/25060227

#SPJ2

Answer:

5 significant figures all figures are significant except for 0

Answer:

6.63

Explanation:

From the relationship;

pH = pKw/2

Pkw = 13.26

Then it follows that;

pH = 6.63

Hence if. pKw = 13.26, the pH = 6.63

Answer:

Take approx 41.7 mL of 12-M HCl in a 1.00-L flask and fill the rest of the volume with distilled water.

Explanation:

Hello,

In this case, for the dilution process from concentrated  12-M hydrochloric acid to 1.00 L of the diluted 0.50M hydrochloric acid, the volume of concentrated HCl you must take is computed by considering that the moles remain constant for all dilution processes as shown below:

[tex]n_1=n_2[/tex]

Which can also be written in terms of concentrations and volumes:

[tex]M_1V_1=M_2V_2[/tex]

Thus, solving for the initial volume or aliquot that must be taken from the 12-M HCl, we obtain:

[tex]V_1=\frac{M_2V_2}{M_1} \\\\V_1=\frac{1.00L*0.5M}{12M}\\ \\V_1=0.0417L=41.7mL[/tex]

It means that you must take approx 41.7 mL of 12-M HCl in a 1.00-L flask and fill the rest of the volume with distilled water for such preparation.

Best regards.

Answer:

They can only be broken down to the Atom like neutron proton and electrons. I hope that help

Answer:

1. Democritus- Matter was made of

different kinds of things.

2. Bernoulli- Gases are formed from tiny particles so small you can't see them. The particles are spread out into a certain area and move when people walk through them.

3. Priestley- Substances combine or

break apart to create new different substances.

Explanation:

1. Democritus was a Greek philosopher regarded to be the "Father of Science". He discovered that all matter were composed of indestructible things he called ATOMOS. Hence, his idea was that Matter was made of different kinds of things (atoms).

2. David Bernoulli, a mathematician, was born in 1700. He contributed immensely to the kinetic molecular theory of gases. In his postulated theory, he gave the idea that gases are formed from tiny particles so small you can't see them. The particles are spread out into a certain area and move when people walk through them.

3. Priestley- Joseph Priestley, born in 1733, is widely known for his discovery of oxygen gas among other gases. His idea was that substances combine or

break apart to create new different substances.

Answer:

Explanation:

For the pH value of a buffer solution , the Henderson formula given is as follows

pH = pKa + log [ A⁻] / [AH ]

Now let us discuss about the phosphoric and succinic acid . The phosphoric acid has a pKa value of 2.3 and for succinic acid , the pKa value is 4.2 . The pKa value of succinic acid is more close to 5 . So to achieve pH value of 5 , succinic acid is a better alternative . The value of  [ A⁻] / [AH ]  is kept almost equal to 1 to increase the buffer capacity .

Answer:

c- observations

hope this helps

Explanation:

Answer:

Slower

Explanation:

Different forces, such as gravity, can affect an object in many ways.

Scenario 1: A car is climbing a hill and then starts to coast.

Here, when the car starts to not accelerate anymore, gravity could pull it to slow down and eventually stop.

Scenario 2: A car is speeding downwards.

Here, when the car isn't on the gas pedal, gravity could act upon the car and make it go faster.

forces can make things move faster or slower them down.

Answer:

Alkali Metals

Explanation:

Because they are in group one, but Hydrogen is not an alkali metal.

Answer:

The creation of regulations that limit timber activities and the exploitation of wood can prevent soil erosion in Troy.

Explanation:

The exploitation of the wood was an intense activity and that did not have any regulation that would limit its damages, caused by its exploratory activities.

As the timber market was totally undisciplined, the exploitation of the wood caused a strong deforestation, leaving the soil totally unprotected and susceptible to strong erosion.

Soil erosion has a very negative impact on the environment, requiring regulations to be made to prevent this from happening.

Based on this, we can say that one way to prevent environmental problems in the seaport of troy is by establishing laws and regulations that limit logging activities.

Answer:

15. Velocity = 3 X 10^8

     Distance = 1580 m

time = distance / velocity

t = 1580 / 3 * 10^8

t =  1580 * 10^-8 / 3

t = 158 * 10^-7/3

t = 5.26 * 10^-8 seconds  

16. Converting the distance to 'm'

Given distance (in miles), multiplying by 1.609 to convert to  km and also multiplying by 1000 to convert to 'm'

s= 4.8 * 1.609 * 10^7 * 1000

v = 3 * 10^8

t =  4.8 * 1609  * 10^7 / 3 * 10^8

t = 1.6 * 1609 * 10^-1

t = 2574.4 * 10^ -1

t = 2.5744 * 10^-4 s

17. Mass in 1 tsp of medicine = 5 mL at a density of 25 mg/mL

Mass in 1 tsp of medicine = 5 * 25 = 125 mg

Mass prescribed by the doctor  = 375 mg

Number of table spoons required = Mass prescribed / Mass in 1 tsp

N = 375/125 = 3 table spoons of the medicine

18. Density of medicine = 400g/ 5mL = 80g / mL

Medicine required = 1500 g

Volume of medicine required = Medicine Required / Density of medicine

Volume = 1500 / 80 = 18.75 mL of medicine is required

Hence, the volume of the suspension should be at least 18.75 mL

19. Volume of 10 drops = 1 mL

Volume of 5 drops = 1/2 mL

The faucet is leaking 5 drops or 1/2 mL water per minute

Number of minutes in a day = 60 * 24  = 1440 minutes in a day

Water leaked in 1440 minutes = 1440 * 1/2 = 720

0.720 L (720 mL) Water leaked from the faucet in a day

Kindly mark Brainliest, Thanks

Answer:

Molar concentration of the Fe³⁺ in the unknown solution is 8.01x10⁻⁵M.

Explanation:

When you make a calibration curve in a spectrophotographic analysis you are applying the Lambert-Beer law that states the concentration of a compound is directely proportional to its absorbance:

A = E*l*C

Where A is absorbance, E is molar absorption coefficient, l is optical path length and C is molar concentration

Using the equation of the line you obtain:

y = 4541.6X + 0.0461

Where Y is absorbance and X is concentration -We will assume concentration is given in molarity-

As absorbance of the unknown is 0.410:

0.410 = 4541.6X + 0.0461

X = 8.01x10⁻⁵M

Answer:

312.5J

Explanation:

K.E=1/2*mv°2

=1/2*25*25

=312.5