calculate the hrxn for the following chemical equation use the hf given above ch4(g) 2o2(g) --> co2(g) 2h2o(g)

Among all the given option, Phenolphthalein is the Most Commonly Used Indicator in Chemistry.

What is the most commonly used indicator in chemistry and why?

Among the indicators listed, phenolphthalein is the most commonly used indicator in chemistry. It is a weak acid that displays different colors depending on the pH of the solution it is in. In acidic solutions, it appears colorless, while in basic solutions, it turns pink or magenta.

Its sensitivity to changes in pH and ease of use make it a popular choice in acid-base titrations and other experiments where pH is critical. Additionally, its low cost and availability contribute to its widespread use. Overall, phenolphthalein is a versatile and reliable indicator that plays an essential role in many laboratory applications.

To learn more about Phenolphthalein, visit: https://brainly.com/question/14442815

#SPJ4

The ratio of C2H3O2-/HC2H3O2 must be 0.398 or approximately 0.40. The correct answer is 0.40.

What is pH?

pH is a measure of the acidity or basicity (alkalinity) of a solution. It is defined as the negative logarithm (base 10) of the concentration of hydrogen ions (H+) in a solution.

The pH scale ranges from 0 to 14, where a pH of 7 is considered neutral (neither acidic nor basic), pH values below 7 indicate acidity (higher concentration of H+ ions), and pH values above 7 indicate alkalinity (lower concentration of H+ ions).

The Henderson-Hasselbalch equation for an HC2H3O2 buffer with a pH of 4.34 and pKa of 4.74 is:

pH = pKa + log([C2H3O2-]/[HC2H3O2])

4.34 = 4.74 + log([C2H3O2-]/[HC2H3O2])

Simplifying:

log([C2H3O2-]/[HC2H3O2]) = -0.40

Taking the antilog of both sides:

[C2H3O2-]/[HC2H3O2] = 10^(-0.40)

[C2H3O2-]/[HC2H3O2] = 0.398

Therefore, the ratio of C2H3O2-/HC2H3O2 must be 0.398 or approximately 0.40. Answer: 0.40.

Learn more about pH from the given link

https://brainly.com/question/172153

#SPJ4

To calculate the pH, the equation which represents an acid-base or a buffer solution is represented below is used.

pH = pKₐ + log([A⁻]/[HA])

One way to determine the pH of a buffer is by using the Henderson–Hasselbalch equation, which is

pH = pKₐ + log([A⁻]/[HA])

In the above equation, [HA] and [A⁻] refer to the equilibrium concentrations of the conjugate acid–base pair used to create the buffer solution. For the titration of a weak acid with a strong base, the pH curve is initially acidic and has a basic equivalence point (pH > 7). The section of curve between the initial point and the equivalence point is known as the buffer region.

To learn more about pH check the link below-

brainly.com/question/26424076

#SPJ4

The hydroxide ion concentration, [OH⁻] = 2.77 x 10⁻⁷ M, which is calculated in the below section.

The value of Kw = 7.7 x 10⁻¹⁴

In the autoionization of water, a proton is transferred from one water molecule to another to produce a hydronium ion (H₃O⁺) and a hydroxide ion (OH⁻). The equilibrium expression for this reaction is Kw = [H₃O⁺][OH⁻],

The concentration of hydronium ion and hydroxide ion when a water molecule dissociates is the same which is 1 mol.

Kw = [H₃O] [OH⁻]

7.7 x 10⁻¹⁴ = [OH⁻]²

[OH⁻] = √(7.7 x 10⁻¹⁴)

[OH⁻] = 2.77 x 10⁻⁷ M

To learn more about hydronium ion check the link below-

brainly.com/question/27586088

#SPJ4

[tex]CIF_{3}[/tex] has 120 degree bond angles due to its trigonal bipyramidal molecular geometry with one lone pair and three bonded fluorine atoms.

What molecule has 120 degree bond angles and why?

The molecule that will have 120 degree bond angles is option E, [tex]ClF_{3}[/tex]. This is because [tex]ClF_{3}[/tex] has a trigonal bipyramidal molecular geometry with one lone pair and three bonded fluorine atoms. The three fluorine atoms are located in the equatorial plane of the molecule, creating 120 degree bond angles between them.

The lone pair of electrons is located in the axial position, perpendicular to the equatorial plane. The other options do not have a trigonal bipyramidal molecular geometry and therefore do not have bond angles of 120 degrees. [tex]ClF_{3}[/tex] has a trigonal pyramidal geometry with bond angles of 107 degrees, [tex]BCl_{3}[/tex] has a trigonal planar geometry with bond angles of 120 degrees, and [tex]PH_{3}[/tex] has a trigonal pyramidal geometry with bond angles of 93.5 degrees. No answer cannot be evaluated as there is no information to consider.

To learn more about molecular geometry, visit: https://brainly.com/question/29650255

#SPJ4

Diluting the solution of C₂₅H₃₀N₃ (aq) by a factor of two will result in a decrease in the reaction rate due to the reduction in concentration.

When the solution of C₂₅H₃₀N₃ (aq) is diluted by a factor of two, the reaction rate will be affected due to the change in concentration. In general, the rate of a chemical reaction is dependent on the concentrations of the reactants involved. According to the rate law, as the concentration of reactants decreases, the reaction rate will also decrease.

In this case, diluting the solution by a factor of two means that the concentration of C₂₅H₃₀N₃ is reduced by half. As a result, the frequency of collisions between the reacting molecules decreases, leading to a slower reaction rate. It is important to note that the effect on the reaction rate depends on the order of the reaction with respect to C₂₅H₃₀N₃. For a first-order reaction, the rate would decrease by half, whereas, for a second-order reaction, the rate would decrease to a quarter of its initial value.

Learn more about second-order reaction here:

https://brainly.com/question/12446045

#SPJ11

B, C, and D are statements that best describe why explanations of results might differ considering hypothesis.

An informed estimate or speculative explanation for a phenomenon or observable occurrence that may be tested by more research is called a hypothesis. It is a hypothesis that may be supported or refuted by experiments or observations and is founded on past information, observations, and reasoning. A key component of the scientific process, a hypothesis is a statement that may be tested by investigation or observation. Predictions regarding the outcome of an experiment or observation are frequently made using hypotheses; if the predictions are verified by the data, the hypothesis is supported. The theory could need to be amended or abandoned if the predictions are not confirmed.

B) Why the results occurred may not yet be known.

C) Different people might have different explanations about why the results occurred.

D) The explanation would depend on if the hypothesis was supported.

These statements best describe why explanations of results might differ. Explanations are not solely dependent on differences in observations during experiments, and they are not all the same when they are about similar topics. Additionally, explanations can vary depending on who is providing the explanation, as different people may have different perspectives, knowledge, and interpretations. Finally, an explanation would also depend on whether the hypothesis was supported or not, as the results may require a different explanation if the hypothesis was not supported.

To learn more about hypothesis, refer to:

https://brainly.com/question/606806

#SPJ4

This is due to the fact that Period 3 elements have electrons at the third energy level, whereas Period 2 elements have electrons at the second energy level.

On the right side of the periodic table are the nonmetals. Nonmetals have a dull appearance and are fairly brittle. They acquire electrons when they form ions. Additionally, they are poor heat and electricity conductors.

Period 3 elements that are not metals In period 3, the elements on the left-hand side of the periodic table, known as the s-block elements, are metals, while the elements on the right-hand side, known as the p-block elements, are nonmetals.

This implies that the metals are great conduits of power, while the nonmetals are unfortunate channels. There are, however, a few exceptions. Si, for instance, is a metalloid, which means that it has properties that are similar to those of metals and nonmetals. It is a semiconductor, and that implies it can lead power under specific circumstances yet not others.

Learn more about Non - metal :

brainly.com/question/988988

#SPJ4

The salt that produces a basic solution when dissolved in water is NaF (sodium fluoride).

Here's a step-by-step explanation:

1. Identify the ions in the salt: NaF consists of Na+ (sodium ion) and F- (fluoride ion).
2. Determine the acidity or basicity of the ions:
  - Na+ is the cation of a strong base (NaOH, sodium hydroxide), so it does not affect the pH.
  - F- is the anion of a weak acid (HF, hydrofluoric acid), so it tends to accept a proton (H+) and increase the pH.
3. Combine the ions' effects: Since Na+ does not affect the pH and F- increases the pH, NaF dissolved in water will produce a basic solution.

To know more about visit:

https://brainly.com/question/28920539

#SPJ11

Complete and balance equation of redox reaction in acidic solution is: 4MnO₄⁻ (aq) + 5N₂O₃ (aq) + 2H⁺ (aq) ⇒ 4Mn₂⁺ (aq) + 10NO₃⁻ (aq) + H₂O (l)

Redox reactions are oxidation-reduction chemical processes in which the oxidation states of the reactants change. Redox is a shortened version of reduction-oxidation. Two distinct processes—a reduction process and an oxidation process—can be used to describe all redox reactions.

In redox or oxidation-reduction processes, the oxidation and reduction reactions usually take place concurrently. In a chemical reaction, the material that is being reduced is referred to as the reducing agent, and the substance that is being oxidised is the oxidising agent.

The equation we have is

MnO₄⁻ (aq) + N₂O₃(aq) ⇒ Mn₂⁺ (aq) + NO (aq)

For balancing the equation we need to balance the molecules on each side:

The given unbalanced redox reaction is :

MnO₄⁻ (aq) + N₂O₃ (aq) -----------> Mn₂⁺ (aq) + NO₃⁻ (aq)

Balanced reaction at anode is :

N₂O₃ (aq) + 3H₂O (l) -----------> 2NO₃⁻ (aq) + 6H⁺ (aq) + 4e⁻

Balanced reaction at cathode is :

MnO₄⁻ (aq) + 8H⁺ (aq) + 5e⁻  -----------> Mn₂⁺ (aq) + 4H₂O (l)

Now,

Multiply anode half by 5 and cathode by 4 and then add both the equations :

Therefore,

Overall complete and balanced redox reaction in acidic medium is :

4MnO₄⁻ (aq) + 5N₂O₃ (aq) + 2H⁺ (aq) ⇒ 4Mn₂⁺ (aq) + 10NO₃⁻ (aq) + H₂O (l)

Learn more about Balance equation:

https://brainly.com/question/26227625

#SPJ4

The [tex][OH^-][/tex] of a [tex]0. 255 M[/tex] solution of pyridine, [tex]C_5H_5N[/tex] is [tex]4.30 * 10^{-10} M[/tex].

The pH of a [tex]0. 400 M[/tex] solution of aniline, [tex]C_6H_5NH_2[/tex] is [tex]9.98.[/tex]

1]  Pyridine [tex](C_5H_5N)[/tex] is a weak base, and its Kb value is given as [tex]1.69 * 10^{-9}[/tex]. To find the [tex][OH^-][/tex] of a [tex]0.255 M[/tex] solution of pyridine, we can use the following equation:

[tex]Kb = [OH^-][C_5H_5N]/[C_5H_5NH^+][/tex]

where [tex][C_5H_5NH^+][/tex]represents the concentration of the conjugate acid of pyridine, which is negligible compared to the concentration of pyridine.

Rearranging the equation and plugging in the values, we get:

[tex][OH^-] = Kb[C_5H_5N] / [C_5H_5NH^+]\\= (1.69 * 10^{-9})(0.255) / 1\\= 4.30 x 10^ {-10} M[/tex]

Therefore, the [tex][OH^-][/tex] of the solution is [tex]4.30 * 10^{-10} M.[/tex]

2] Aniline [tex](C_6H_5NH_2)[/tex] is also a weak base, and its Kb value is given as [tex]4.27 * 10^{-10}.[/tex] To find the pH of a  [tex]0.400 M[/tex] solution of aniline, we can use the following equation:

[tex]Kb = [OH^-][C_6H_5NH_2]/[C_6H_5NH_3^+][/tex]

where[tex][C_6H_5NH_3^+][/tex]represents the concentration of the conjugate acid of aniline, which is formed when aniline accepts a proton from water.

We can assume that [tex]x[/tex] moles of aniline react with water to form [tex]x[/tex] moles of [tex]C_6H_5NH_3^+[/tex] and [tex]x[/tex] moles of [tex]OH^-[/tex]. Therefore, the initial concentration of aniline, [tex][C_6H_5NH_2][/tex], will decrease by [tex]x[/tex], while the concentrations of [tex][C_6H_5NH_3^+][/tex] and [tex][OH^-][/tex] will increase by [tex]x[/tex]. At equilibrium, we can express the concentrations as given follows:

[tex][C_6H_5NH_2] = 0.400 - x[/tex]

[tex][C_6H_5NH_3^+] = x[/tex]

[tex][OH^-] = x[/tex]

The value of [tex]x[/tex] can be determined using the Kb expression:

[tex]Kb = [OH^-][C_6H_5NH_2]/[C_6H_5NH_3^+]\\\\x = \sqrt{(Kb[C_6H_5NH_2]/[C_6H_5NH_3^+])} \\= \sqrt{((4.27 * 10^{-10})(0.400) / 1)}\\= 1.04 * 10^{-5} M[/tex]

Therefore, the [tex][OH^-][/tex] of the solution is[tex]1.04 * 10^{-5} M,[/tex] and the pH can be calculated using the expression:

[tex]pH = 14 - pOH\\= 14 - log([OH^-])\\= 14 - log(1.04 * 10^{-5})\\= 9.98[/tex]

Therefore, the pH of the solution is [tex]9.98[/tex].

Learn more about pH of a solution at

brainly.com/question/30934747

#SPJ4

You would need to give approximately 18.8 ml of the ABC 8% solution to administer a 150 mg dose.

To calculate the required amount in milliliters, we need to use the following formula:

(required amount in ml) = (required dose in mg) / (concentration of stock solution in mg/ml)

Here, the required dose is 150 mg, and the concentration of the stock solution is 8% or 8 mg/ml.

So, putting the values in the formula, we get:

(required amount in ml) = 150 mg / 8 mg/ml

(required amount in ml) = 18.75 ml

Rounding off the answer to the nearest tenth, we get:

(required amount in ml) ≈ 18.8 ml

Therefore, you would need to give approximately 18.8 ml of the ABC 8% solution to administer a 150 mg dose.

To learn about the solution:

https://brainly.com/question/30665317

#SPJ4

Answer:

Because universal gas constant and number of moles remains constant.

Explanation:

The ideal gas law is [tex]PV = nRT[/tex].

The combined gas law is [tex]P_1V_1/T_1 = P_2V_2/T_2[/tex].

The difference between the two is just n and R, which stand for the number of moles and the universal gas constant.

Putting the ideal gas law into the combined gas law form, you get [tex]P_1V_1/n_1R_1T_1 = P_2V_2/n_2R_2T_2[/tex].

However, since the number of moles won't change and at STP, the universal gas constant remains constant, you can cross those values out and get the combined gas law.

The ideal gas law is derived from the combined gas law at STP. The ideal gas law equation relates the pressure, volume, and temperature of a gas. At STP, the temperature is 273.15 K (0 °C) and the pressure is 1 atmosphere (atm).

The ideal gas law is derived from the combined gas law at STP (standard temperature and pressure).

The combined gas law equation relates the pressure, volume, and temperature of a gas. At STP, the temperature is 273.15 K (0 °C) and the pressure is 1 atmosphere (atm). Therefore, we can substitute these values into the combined gas law equation to obtain the ideal gas law equation.

The ideal gas law equation is expressed as: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.

https://brainly.com/question/1063475

#SPJ2

the final volume of the gas sample is 10 L when the pressure is increased from 1 atm to 2 atm.

To solve this problem, we can use the combined gas law, which relates the initial and final conditions of a gas sample undergoing a change in pressure, temperature, or volume, while keeping the number of moles constant.

The combined gas law equation is:

(P1V1) / T1 = (P2V2) / T2

where P1, V1, and T1 are the initial pressure, volume, and temperature of the gas sample, and P2, V2, and T2 are the final pressure, volume, and temperature of the gas sample.

In this case, we can assume that the temperature remains constant, so T1 = T2. We also know that the initial pressure is P1 = 1 atm, the initial volume is V1 = 20 L, and the final pressure is P2 = 2 atm. We want to find the final volume V2.

Substituting these values into the combined gas law equation, we get:

(1 atm) x (20 L) = (2 atm) x V2

Solving for V2, we get:

V2 = (1 atm) x (20 L) / (2 atm) = 10 L

To learn more about gas visit:

brainly.com/question/3637358

#SPJ11

Possible approach for the oxidation of 4-tert butylecyclohexanone using sodium hypochlorite as the oxidizing agent in the presence of a suitable solvent and catalyst.

What is a possible approach for oxidizing 4-tert butylecyclohexanone using sodium hypochlorite as the oxidizing agent?

In principle, the oxidation of 4-tert butylecyclohexanone could be achieved using a variety of oxidizing agents, depending on the desired reaction conditions and yield. For example, one possible approach would be to use sodium hypochlorite (NaClO) as the oxidizing agent, in the presence of a suitable solvent and catalyst. Under these conditions, the oxidation of 4-tert butylecyclohexanone might produce a mixture of products including 4-tert butylcyclohexanol and other related compounds.

It's important to note that the specific reaction conditions and outcome will depend on a range of factors such as the choice of oxidizing agent, the reaction time and temperature, and the purity and concentration of the starting materials. Without more information about the specific experiment you are referring to, it's difficult for me to provide a more precise answer.

To learn more about oxidation, visit: https://brainly.com/question/13182308

#SPJ4

The total volume before reaction will be 29.8 L and the volume  after reaction will be 6.54 L.

 CH₄ + H₂O ----- 3H₂ + CO

O.120   0.120

0            0 ---- 3× 0.120   0.120

Total no of moles before reaction =2 × 0.120

                                             = 0.24 mol

Total no. of moles after reaction = 3 × 0.120 + 0.120

                                            = 0.48 mol

        PV= nRT

          V∝ n

         V₁ / n₁ = V₂ / n₂

      14.9 / 0.24 = V₂ / 0.48

            V₂ = 29.8 L

2.         2CO + 2NO ⇒ 2CO₂ + N₂

          0.11          0.11           0         0

           0               0          0.11      0.055

Total no. of moles before reaction =0.11 + 0.11 = 0.22 moles

Total no. of moles  after reaction = 0.11 + 0.055 = 0.0165 mol

                               V₁/n₁ = V₂ / n₂

                8.72/ 0.22 = V₂/ 0.165

                     V₂ = 6.54 L

The quantity of a substance containing the same number of elementary entities—atoms, molecules, ions, electrons, radicals, etc.—is referred to as a mole. as there are particles in 12 grams of carbon - 12. A substance's relative molecular mass in grams is equal to one mole's mass.

We can count atoms and molecules by weighing macroscopically small amounts of matter using the mole concept because atoms and molecules are so small. It establishes a benchmark for determining reaction stoichiometry. It explains the characteristics of gases.

Learn more about moles concept :

brainly.com/question/30632038

#SPJ4

The standard voltage of an electrochemical cell can be calculated using the table of standard reduction potentials. In this table, each half-reaction is assigned a standard reduction potential, which is the tendency of the half-reaction to gain electrons and undergo reduction.

To calculate the standard voltage of an electrochemical cell, we subtract the standard reduction potential of the half-reaction at the anode from the standard reduction potential of the half-reaction at the cathode. This gives us the standard cell potential (or voltage) for the electrochemical cell.
For example, if we have an electrochemical cell with a zinc anode and a copper cathode, the relevant half-reactions are:

Zn(s) → Zn2+(aq) + 2e- (oxidation) E° = -0.76 V
Cu2+(aq) + 2e- → Cu(s) (reduction) E° = +0.34 V

To calculate the standard voltage of this electrochemical cell, we subtract the standard reduction potential of the anode (Zn) from the standard reduction potential of the cathode (Cu):

E°cell = E°cathode - E°anode
E°cell = +0.34 V - (-0.76 V)
E°cell = +1.10 V

Therefore, the standard voltage of this electrochemical cell is +1.10 V.
To find the standard voltage of an electrochemical cell involving two half-reactions from the table of standard reduction potentials, you should follow these steps:
1. Identify the two relevant half-reactions from the table.
2. Determine which half-reaction will act as the oxidation reaction (lose electrons) and which will act as the reduction reaction (gain electrons). The half-reaction with the higher standard reduction potential will be the reduction reaction, while the one with the lower standard reduction potential will be the oxidation reaction.
3. Write down the standard reduction potentials (E°) for both half-reactions.
4. Calculate the standard cell potential (E°cell) using the following formula:

E°cell = E°reduction - E°oxidation

By following these steps and using the table of standard reduction potentials, you can find the standard voltage of the electrochemical cell in question. Remember, the result should be expressed in volts (V).

to know more about electro chemical cell:

https://brainly.in/question/13768506

#SPJ11

The melting point line is shorter than the boiling point line because melting occurs over a smaller temperature range than boiling.

The melting point line on a phase diagram represents the temperature and pressure conditions at which a substance changes from a solid to a liquid. The boiling point line represents the temperature and pressure conditions at which a substance changes from a liquid to a gas. The melting point line is shorter than the boiling point line because the phase transition from solid to liquid is less affected by changes in pressure than the phase transition from liquid to gas. When a substance melts, the intermolecular forces between particles weaken enough to allow the particles to slide past one another, resulting in a change of state. However, when a substance boils, the intermolecular forces must be completely overcome to allow the particles to become a gas, and the pressure must be kept constant. Therefore, the boiling point line is longer than the melting point line.

Learn more about melting point here:

https://brainly.com/question/29578567

#SPJ11

Answer:

As the pressure increases the boiling point increases.

The primary catalyst in Underwood's study of siblicide was betrayal.

Siblicide is the killing of one’s own sibling. It is a rare form of homicide that occurs in some animal species, including some primates, dolphins, and birds. In humans, it is a very rare occurrence, and is often the result of a mental disorder or extreme psychological distress. Siblicide is often seen as a desperate act of competition for resources, typically parental attention or resources within the family. In some cases, siblicide can be driven by jealousy or even a desire for revenge. In other cases, it may be the result of a misunderstanding or miscommunication.

Underwood's study focused on the cases in which a sibling had killed another sibling out of betrayal, either from a feeling of being wronged by the other sibling or from feeling betrayed by the sibling.

To learn more about psychological distress
https://brainly.com/question/14476566
#SPJ4

The three spheres of influence used to identify the scope of problems and opportunities that software addresses are: Control (at the centre), Influence, and Concern.

"Data frameworks that capability in the client's own area of impact satisfy their needs. By increasing their own effectiveness, users of these information systems can produce work of a higher quality and quantity. This kind of software is often referred to as personal productivity software.

When two or more people work together to accomplish a common goal, a workgroup is formed. A workgroup can be a short-term team assembled to finish a single project or a large official, long-term organizational unit like a division or department. The information system of a workgroup helps its members achieve their common goals.

Data frameworks that are essential for an association's effective reach let the organization interface with its current circumstance, which comprises of partners including purchasers, providers, investors, opponents, and particular vested parties as well as the monetary area and legislative associations.

Learn more about Spheres of influence:

https://brainly.com/question/16881899

#SPJ4

Viscosity is the measure of a fluid's resistance to flow. It is affected by several factors, including temperature, pressure, and the presence of other substances in the fluid.

Fluid is a substance that can flow and take the shape of its container. It can exist in either a liquid or a gas state, and can be composed of a variety of elements. Fluids are found in nature, such as water, air, and other liquids, and can also be created artificially in laboratories. Fluids are studied by scientists in the fields of physics, engineering, and chemistry. In physics, the study of fluids is known as fluid mechanics, and is used to understand how fluids move, the forces that act on them, and their behavior under different conditions. In engineering, fluid dynamics is used to design and analyze numerous industrial and engineering systems, such as air conditioning systems, engines, and pumps. In chemistry, the study of fluids is known as colloid science and is used to find out how particles interact in a fluid.

To learn more about fluid

https://brainly.com/question/30543213

#SPJ4

In industrial processes, ammonia (NH₃, 17.04 g/mol) is manufactured by combining nitrogen (N₂) and hydrogen (H₂) through a method known as the Haber process. 18.32 kg of H₂ is the mass of H₂ that should be used to produce 34.0 kg of NH₃ with a yield of 33.0%.

To determine the mass of H₂ required to achieve a final yield of 34.0 kg NH₃ with a yield of 33.0%, we need to use stoichiometry and the concept of percent yield.

The balanced equation for the production of ammonia from nitrogen and hydrogen is:

N₂ + 3H₂ → 2NH₃

According to the equation, 3 moles of hydrogen (H₂) are required to produce 2 moles of ammonia (NH₃).

Given:

Desired yield of NH₃ = 34.0 kg

Yield percentage = 33.0%

First, we calculate the theoretical yield of NH₃ based on the given yield percentage:

Theoretical yield of NH₃ = Desired yield / Yield percentage

Theoretical yield of NH₃ = 34.0 kg / (33.0/100) = 103.03 kg

Next, we determine the moles of NH₃ in the theoretical yield:

Moles of NH₃ = Theoretical yield / Molar mass of NH₃

Moles of NH₃ = 103.03 kg / 17.04 g/mol = 6045.74 mol

Since the stoichiometric ratio of H₂ to NH₃ is 3:2, we can calculate the moles of H₂ required:

Moles of H₂ = (3/2) × Moles of NH₃

Moles of H₂ = (3/2) × 6045.74 mol = 9068.61 mol

Finally, we convert the moles of H₂ to mass:

Mass of H₂ = Moles of H₂ × Molar mass of H₂

Mass of H₂ = 9068.61 mol × 2.02 g/mol = 18,324.35 g

Converting grams to kilograms:

Mass of H₂ = 18,324.35 g / 1000 = 18.32 kg

Therefore, the mass of H₂ that should be used to achieve a final yield of 34.0 kg NH₃ with a yield of 33.0% is approximately 18.32 kg.

To know more about the Haber process refer here :

https://brainly.com/question/30928282#

#SPJ11

Complete question :

Ammonia (NH₃, 17.04 g/mol) is industrially produced from N₂ and H₂ using the Haber process. What mass of H₂ should be used if 34.0 kg NH₃ must be the final yield when the reaction is run under conditions that produce only a 33.0% yield?

18.3 kg 3.03 kg 6.05 kg 6.05 kg. You selected this answer. 36.6 kg 8.91 kg

The volume of 1.00 mole of hydrogen gas at STP is 22.4 liters,

The ideal gas law is expressed as:

PV = nRT

Where P is the pressure of the gas, V is its volume, n is the number of moles of the gas, R is the universal gas constant, and T is the temperature of the gas in Kelvin.

At STP, the pressure and temperature are known, and we can use the ideal gas law to solve for the volume of 1.00 mole of hydrogen gas:

Plug these values into the ideal gas law equation:

PV = nRT

V = nRT/P

V = (1.00 mol × 0.08206 Latm/molK × 273.15 K) / (1 atm)

V = 22.4 L

Therefore, the volume of of the gas is 22.4 liters.

Learn more about Ideal Gas Law here: brainly.com/question/4147359

#SPJ1

The government then places a tax on the producers of good X-in effect, taxing them on each unit of good X they sell. As a result, the supply curve Shifts (up and) leftward from S1 to S2, option B.

The supply curve can also be affected by other variables, such as a change in the cost of manufacturing. The curve will move to the left (S3) if a drought drives up water prices. Farmers will switch to growing that in its place if the price of a maize alternative, for example, rises from the supplier's point of view, and the supply of soybeans will fall (S3).

The supply curve will move right (S2) if a new technology, such as a pest-resistant seed, enhances yields. As a result of producers' incentives to hold off on selling, the supply will momentarily shift to the left (S3) if the future price of soybeans is greater than the present price.

The supply curve illustrates the relationship between the price of an item or service and the volume delivered over a specific time period. In a typical scenario, the amount delivered will be shown on the horizontal axis and the price will be shown on the left vertical axis.

Learn more about Supply curve:

https://brainly.com/question/26430220

#SPJ4

Complete question:

The market for good X is initially in equilibrium at $5. The government then places a tax on the producers of good X-in effect, taxing them on each unit of good X they sell. As a result, the supply curve

shifts (down and) rightward from S2 to S1.

shifts (up and) leftward from S1 to S2

does not shift from S1

There is not enough information to answer the question.

When three molecules of hydrocarbon, CH4 react with thirteen molecules of oxygen, O2 during a combustion reaction, the products formed are carbon dioxide (CO2) and water (H2O). This is the balanced reaction:
3 CH4 + 13 O2 → 3 CO2 + 6 H2O

In a combustion reaction, the fuel and oxidizing agent react in specific proportions to produce the products. For example, the combustion of methane (CH4) follows this balanced equation:
CH4 + 2 O2 -> CO2 + 2 H2O
Here, one molecule of methane reacts with two molecules of oxygen to form one molecule of carbon dioxide and two molecules of water. To determine the number of CO2 and H2O molecules formed when three fuel molecules react with thirteen O2 molecules, we must know the specific fuel being combusted and the balanced equation for the reaction, which is:
3 CH4 + 13 O2 → 3 CO2 + 6 H2O
Once the balanced equation is known, we can calculate the number of product molecules formed based on the provided reactant amounts, ensuring that the stoichiometric proportions are maintained.

To know more about Combustion Reaction visit:
https://brainly.com/question/30562669
#SPJ11

The easiest metal to oxidize among the given options is sodium (a). Sodium has only one valence electron, which makes it highly reactive with other elements. It readily loses this valence electron to form a sodium ion with a +1 charge. This reaction results in the formation of sodium oxide (Na2O) and sodium peroxide (Na2O2) when it reacts with oxygen.

Sodium is so reactive that it can even catch fire when exposed to air or water, making it a hazardous material. On the other hand, iron (b) and gold (d) are relatively stable metals and do not easily react with oxygen to form oxides. Lithium (c), although it has a similar valence electron configuration to sodium, is not as reactive as sodium due to its smaller atomic size and higher ionization energy.

In conclusion, among the given options, sodium is the easiest metal to oxidize due to its high reactivity and low ionization energy.

you know more about easiest metal to oxidize pls visit-

https://brainly.com/question/8543126

#SPJ11

(D) Hydrofluoric acid is not a strong acid. While it is a highly corrosive and dangerous acid, it is not classified as a strong acid because it does not completely dissociate in water to produce H+ ions.

Hydroiodic acid (HI), on the other hand, is considered a strong acid only in concentrated form. In dilute solutions, it behaves as a weak acid, meaning that it does not dissociate completely in solution, resulting in a lower concentration of H+ ions. Therefore, hydroiodic acid is not considered a strong acid under normal conditions. Strong acids such as sulfuric acid, nitric acid, hydrochloric acid, and hydroiodic acid fully ionize in water to produce H+ ions.

To know more about strong acids, click here:

https://brainly.com/question/28858976

#SPJ11

The pH of a solution can be calculated using the formula pH = -log[H+], where [H+] is the concentration of hydrogen ions in the solution. In the case of a NaF solution, the F- ion will react with water to form HF and OH- ions according to the following equation  the correct answer is a. 8.09.

F- + H2O ⇌ HF + OH-  The HF formed will then react with water to form H3O+ ions and F- ions: HF + H2O ⇌ H3O+ + F-
Since F- is a weak base, it will react with the H3O+ ions produced by the HF to form more HF and H2O:
F- + H3O+ ⇌ HF + H2O
This means that the concentration of H3O+ ions in the solution will be lower than that in pure water, resulting in a pH higher than 7.0. To calculate the pH of the NaF solution, we need to first determine the concentration of H3O+ ions. This can be done using the equilibrium constant expression for the reaction: Kw = [H3O+][OH-] = 1.0 x 10^-14
Since the solution is not neutral, we can assume that the [OH-] concentration is very small compared to the [H3O+] concentration. Therefore, we can simplify the expression to: [H3O+] ≈ Kw/[OH-] ≈ 1.0 x 10^-14/[F-]
Substituting the given concentration of NaF into this expression, we get: [H3O+] ≈ 1.0 x 10^-14/0.14 = 7.14 x 10^-14
Taking the negative logarithm of this value gives us the pH of the solution: pH ≈ -log(7.14 x 10^-14) ≈ 8.09

To know more about pH

https://brainly.com/question/172153

#SPJ11

The ion that triggers exocytosis of synaptic vesicles is calcium (Ca2+) ion.

When an action potential reaches the end of an axon, it triggers the opening of voltage-gated calcium channels in the presynaptic membrane. This allows calcium ions to enter the presynaptic terminal and bind to specific proteins on the surface of synaptic vesicles, causing them to fuse with the presynaptic membrane and release their neurotransmitter content into the synaptic cleft.

The influx of calcium ions into the presynaptic terminal is a critical step in the process of neurotransmitter release, and it is tightly regulated by various factors, such as the frequency and duration of the action potential, the availability of calcium ions, and the activity of calcium-binding proteins.

the release of neurotransmitters from synaptic vesicles via exocytosis is a fundamental mechanism for neuronal communication and synaptic plasticity, and it plays a crucial role in various physiological and pathological processes in the nervous system.

To learn more about presynaptic visit;

brainly.com/question/14354045

#SPJ11