calculate the mass defect in fe-56 if the mass of an fe-56 nucleus is 55.921 amu. the mass of a proton is 1.00728 amu and the mass of a neutron is 1.008665 amu. (you can neglect electrons)

The rms speed of nitrogen molecules in a cooler at 8.0°C is approximately 517 m/s (option B).

What is Molecular Weight?

Molecular weight is the sum of the atomic weights (in atomic mass units) of all the atoms in a molecule. It is also known as the molecular mass. The molecular weight is used to calculate various properties of the substance, such as its density, boiling point, and melting point.

First, we need to convert the temperature to kelvin:

T = 8.0°C + 273.15 = 281.15 K

The root-mean-square (rms) speed of gas molecules can be calculated using the formula:

v_rms = sqrt((3 * k_b * T) / m)

where k_b is the Boltzmann constant, T is the temperature in kelvin, and m is the mass of a single molecule.

For nitrogen gas (N2), the molecular weight is 28 g/mol or 0.028 kg/mol. Therefore, the mass of a single nitrogen molecule is:

m = (0.028 kg/mol) / NA = 4.65 × 10^-26 kg

where NA is Avogadro's number.

Now, we can substitute the values into the formula:

v_rms = sqrt((3 * 1.38 × 10^-23 J/K * 281.15 K) / 4.65 × 10^-26 kg)

v_rms = 517 m/s

Learn more about Molecular Weight from the given link

https://brainly.com/question/14596840

#SPJ4

The cylinder will be moving at a velocity of 2.52 m/s after it has rolled 2.2 m down the inclined plane. This calculation can be done using the conservation of energy principle, which states that the initial potential energy of the cylinder is equal to the final kinetic energy plus the final rotational kinetic energy.

To explain further, when the cylinder is released from rest, it has a certain amount of gravitational potential energy due to its height above the ground. As it rolls down the inclined plane, this potential energy is converted into both translational kinetic energy (motion of the center of mass) and rotational kinetic energy (rotation around the center of mass). By the time the cylinder has rolled 2.2 m down the plane, it has lost some potential energy, which has been converted into kinetic energy.

Using the conservation of energy equation and the known values of the cylinder's mass, the angle of the inclined plane, and the distance it has rolled, we can calculate the final velocity of the cylinder as 2.52 m/s.

To know more about gravitational refer to

https://brainly.com/question/12528243

#SPJ11

Running up the stairs requires more effort and energy than walking, resulting in more work done by Bob due to greater force and distance covered.

To clarify further, the quantity of labour performed by Bob depends on both the force he uses and the distance he travels. He covers more ground when running up the stairs than he does while walking, which indicates that he is exerting more effort. Running furthermore demands more effort and energy than walking, thus Bob must use more power to overcome gravity's opposition and move his body weight up the steps. Bob has to put forth more effort sprinting up the stairs than strolling up them.. Therefore, running up the stairs requires more work from Bob than walking up the stairs.

learn more about stairs requires here:

https://brainly.com/question/31615400

#SPJ11

The frequency of electromagnetic radiation having a wavelength of 577.0 nm is 5.20 x 10¹⁴ Hz.

The frequency (f) of electromagnetic radiation can be calculated using the formula: f = c/λ, where c is the speed of light and λ is the wavelength of the radiation.

Given the wavelength of the electromagnetic radiation as 577.0 nm and the speed of light as c = 3.00 x 10⁸ m/s, we need to convert the wavelength from nanometers (nm) to meters (m) before we can calculate the frequency.

So, 577.0 nm = 577.0 x 10⁻⁹ m

Now we can use the formula to find the frequency:

f = c/λ = (3.00 x 10⁸ m/s)/(577.0 x 10⁻⁹ m)

f = 5.20 x 10¹⁴ Hz

Therefore, the frequency of the electromagnetic radiation with a wavelength of 577.0 nm is 5.20 x 10¹⁴ Hz.

To know more about electromagnetic radiation, refer here:
https://brainly.com/question/10759891#
#SPJ11

The momentum of an electron moving with a speed of (a) 0.010c is 2.73 x 10^-24 kg m/s, (b) 0.500c is 1.37 x 10^-22 kg m/s, and (c) 0.900c is 2.46 x 10^-22 kg m/s.

To calculate the momentum of an electron, we can use the equation p=mv, where p is the momentum, m is the mass of the electron, and v is its velocity. The mass of an electron is approximately 9.11 x 10^-31 kg.
(a) For an electron moving with a speed of 0.010c (where c is the speed of light), we can calculate its velocity as v = 0.010c = 3 x 10^6 m/s. Plugging this into the momentum equation, we get p = (9.11 x 10^-31 kg) x (3 x 10^6 m/s) = 2.73 x 10^-24 kg m/s.
(b) For an electron moving with a speed of 0.500c, its velocity is v = 0.500c = 1.5 x 10^8 m/s. Using the momentum equation, we get p = (9.11 x 10^-31 kg) x (1.5 x 10^8 m/s) = 1.37 x 10^-22 kg m/s.
(c) Finally, for an electron moving with a speed of 0.900c, its velocity is v = 0.900c = 2.7 x 10^8 m/s. Plugging this into the momentum equation, we get p = (9.11 x 10^-31 kg) x (2.7 x 10^8 m/s) = 2.46 x 10^-22 kg m/s.

To know more about electron visit; https://brainly.com/question/1255220

#SPJ11

The momentum of an electron is given by the equation p=mv, where p is momentum, m is mass, and v is speed. The mass of an electron is approximately 9.11 x 10^-31 kg.

a) For a speed of 0.010c, the momentum is p = (9.11 x 10^-31 kg) * (0.010c) = 9.11 x 10^-32 kg m/s
b) For a speed of 0.500c, the momentum is p = (9.11 x 10^-31 kg) * (0.500c) = 4.56 x 10^-31 kg m/s
c) For a speed of 0.900c, the momentum is p = (9.11 x 10^-31 kg) * (0.900c) = 8.20 x 10^-31 kg m/s
Therefore, the momentum of the electron increases as its speed increases.
To calculate the momentum of an electron moving at different speeds, we'll use the relativistic momentum formula:
momentum (p) = (m * v) / sqrt(1 - (v^2 / c^2))
where m is the mass of the electron (9.109 x 10^-31 kg), v is the speed, c is the speed of light (2.998 x 10^8 m/s), and sqrt() is the square root function.
(a) For v = 0.010c:
momentum (p) = (9.109 x 10^-31 kg * 0.010 * 2.998 x 10^8 m/s) / sqrt(1 - (0.010^2))
p ≈ 2.737 x 10^-22 kg*m/s
(b) For v = 0.500c:
momentum (p) = (9.109 x 10^-31 kg * 0.500 * 2.998 x 10^8 m/s) / sqrt(1 - (0.500^2))
p ≈ 6.960 x 10^-22 kg*m/s
(c) For v = 0.900c:
momentum (p) = (9.109 x 10^-31 kg * 0.900 * 2.998 x 10^8 m/s) / sqrt(1 - (0.900^2))
p ≈ 2.426 x 10^-21 kg*m/s
So, the momentum of the electron at the given speeds are:
(a) 2.737 x 10^-22 kg*m/s
(b) 6.960 x 10^-22 kg*m/s
(c) 2.426 x 10^-21 kg*m/s

To know more about momentum visit:

https://brainly.com/question/30677308

#SPJ11

Answer: i) To find the direction from point P where the temperature increases most rapidly, we need to find the gradient vector of T(x, y) at point P and then determine its direction. The gradient vector of T(x, y) is given by:

∇T(x, y) = ⟨−2x, −4y⟩

Plugging in P(4, -5) into the gradient vector, we get:

∇T(4, -5) = ⟨−8, 20⟩

The direction of the gradient vector is the direction of maximum increase of the temperature at point P. To find this direction, we can normalize the gradient vector by dividing it by its magnitude:

||∇T(4, -5)|| = √((-8)^2 + (20)^2) = 4√29

So the direction of maximum increase of the temperature at point P is:

⟨−8, 20⟩ / (4√29) = ⟨−2/√29, 5/√29⟩

Therefore, the direction from point P where the temperature increases most rapidly is in the direction of the vector ⟨−2/√29, 5/√29⟩.

ii) To find the rate of increase of the temperature at point P, we can take the dot product of the gradient vector at point P with a unit vector in the direction of maximum increase. We already have the normalized direction vector:

⟨−2/√29, 5/√29⟩

Plugging in P(4, -5) into the gradient vector, we get:

∇T(4, -5) = ⟨−8, 20⟩

Taking the dot product of these two vectors, we get:

⟨−8, 20⟩ · ⟨−2/√29, 5/√29⟩ = (-16 + 100)/29 = 84/29

Therefore, the rate of increase of the temperature at point P is 84/29 degrees Celsius per centimeter, rounded to two decimal places.

Wire I and wire II are made of the same material. Wire II has twice the diameter and twice the length of wire I. If wire I has resistance R, wire II has resistance R/4.

The resistance of a wire is directly proportional to its length and inversely proportional to the cross-sectional area. Let's assume that the length and resistivity of the wires are the same, but the cross-sectional areas are different.

Wire I:

Length = L

Cross-sectional area = A

Resistance = R

Wire II:

Length = 2L

Cross-sectional area = 4A (twice the diameter means four times the cross-sectional area)

Resistance = ?

The resistance of wire II can be calculated as follows:

R2 = (ρ × L) / A2

R2 = (ρ × L) / (4A)

R2 = R / 4

Therefore, the answer is (B) R/4.

To learn more about, resistance, click here, https://brainly.com/question/29427458

#SPJ11

The equation for Newton's second law of motion is F = ma.

Newton's second law of motion states that the acceleration of an object is directly proportional to the force applied to it and inversely proportional to its mass.

Mathematically, the Newton's second law is given as;

F = ma

where;

The S.I units of the physical quantities used in the above equations are;

mass = kg

acceleration = m/s²

force = N

Learn more about Newton's law here: https://brainly.com/question/14222453

#SPJ1

Angular momentum is calculated as product of rotational inertia times rotational velocity.

Define Angular momentum

Any rotating object's property that results from multiplying its moment of inertia by its angular velocity is known as angular momentum. It is a characteristic of rotating bodies determined by the sum of their moment of inertia and angular velocity.

The rotational equivalent of linear momentum is angular momentum, often known as moment of momentum or rotational momentum. It is a conserved quantity, meaning that the total angular momentum of a closed system stays constant, making it a significant physical quantity.

To learn more about angular momentum use:

https://brainly.com/question/4126751

#SPJ4

The table exerts an upward force on the book, which is equal in magnitude and opposite in direction to the force of gravity pulling the book downward force. This is known as the normal force.

When a book is resting on a table, the table exerts an upward force on the book, known as the normal force. This force is perpendicular to the surface of the table and prevents the book from falling through the table. According to Newton's third law of motion, for every action, there is an equal and opposite reaction. So, the book exerts a downward force on the table, but this force does not cause any motion as it is balanced by the normal force exerted by the table on the book. Therefore, the net force on the book is zero, and it remains at rest on the table.

To know more about Newton's third law of motion, click here:

https://brainly.com/question/29768600

#SPJ11

The statement that is false in this situation is that the fact that the bands are multicolored indicates that the film has non-uniform thickness. In reality,

the multicolored bands on the surface of the gasoline are a result of thin-film interference, which occurs when light waves reflect off the top and bottom surfaces of a thin film.

The thickness of the film affects the way the light waves interfere with each other, leading to the appearance of colored bands. However, the colors do not indicate non-uniform thickness,

but rather the thickness of the film at each point on the surface. The other statements are all true. The wavelength that is important for thin-film interference is the wavelength within the film,

which is determined by multiplying the index of refraction and the vacuum wavelength. When light travels through a material with a smaller refractive index toward a material with a larger refractive index,

reflection at the boundary occurs along with a phase change that is equivalent to one-half of a wavelength in the film. When light travels from a larger toward a smaller refractive index,

there is no phase change upon reflection at the boundary.

To know more about non-uniform refer here

brainly.com/question/13079447#

#SPJ11

The total momentum of the billiard balls before the collision is equal to the total momentum of the billiard balls after the collision.

Momentum is an important concept in physics and is defined as the quantity of motion of a body, which is the product of its mass and velocity. Momentum is a vector quantity, meaning it has both magnitude and direction, and is commonly denoted by the symbol "p". It is conserved, meaning it is the same before and after an interaction. Momentum is related to kinetic energy and is proportional to the mass and square of the velocity of an object. Momentum is also important in the study of collisions, and is related to the impulse of a force, which is the integral of a force over a given time period. Momentum can also be used to calculate the angular momentum of a system, which is the product of the moment of inertia and angular velocity.

To learn more about momentum

https://brainly.com/question/1042017

#SPJ4

The winds around the storm are rotating at 85 mph. The strongest winds in the storm are 85 mph and exist on the northern side of the storm.

Option A is correct.

The winds rotate around the central low in the northern hemisphere in a counterclockwise direction, whereas the winds rotate in a clockwise direction in the southern hemisphere because the converging winds spiral inward toward the central low pressure area.

A tropical cyclone is a storm with rapid rotation that develops over tropical oceans, where it gets its energy. It has a low pressure center and clouds that are spiraling toward the eyewall, which is the central part of the system where the weather is typically calm and clear.

Incomplete question:

Consider a Northern Hemisphere tropical cyclone, moving toward the west at 15 mph. The winds around the storm are rotating at 85 mph. The strongest winds in the storm are _______ and exist on the ________ side of the storm.

A. 85 mph, northern

B. 70 mph, southern

C. 100 mph eastern

D. 85 mph eastern

E. 100 mph northern

Which one is correct?

Learn more about Tropical cyclone;

brainly.com/question/31034027

#SPJ4

The voltage at the node indicated by the red dot (at the inverting input of the op-amp) is 0 volts.

In an ideal operational amplifier (op-amp) configuration with negative feedback, the voltage at the inverting input (red dot) is equal to the voltage at the non-inverting input. Assuming the non-inverting input is grounded (connected to a 0V reference), the voltage at the inverting input will also be 0 volts. This is known as the virtual short circuit concept, which is a fundamental property of op-amps in negative feedback configurations.

Based on the virtual short circuit concept, the voltage at the red dot (inverting input) of the op-amp is 0 volts.

To know more about voltage, visit:

https://brainly.com/question/29445057

#SPJ11

This phenomenon occurs due to the Doppler effect, which results from the Sun's rotation.

The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the source of the wave.

In the case of the Sun, it rotates from west to east, causing the light emitted from the east limb to move towards the observer, leading to blueshift.

Conversely, the light emitted from the west limb moves away from the observer, causing redshift.

Summary: The blueshift observed in the light from the east limb of the Sun and the redshift in the light from the west limb are caused by the Doppler effect due to the Sun's rotation from west to east.

Learn more about Doppler effect click here:

https://brainly.com/question/28106478

#SPJ11

The change in entropy, when 15.0 g of water at 100°C is turned into steam at 100°C, can be calculated using the formula ΔS = Q/T, where Q is the heat added to the system and T is the temperature in Kelvin.

The change in entropy of a system can be calculated using the formula ΔS = Q/T, where ΔS is the change in entropy, Q is the heat added to the system, and T is the temperature in Kelvin. In this case, we can calculate the change in entropy when 15.0 g of water at 100°C are turned into steam at 100°C using the latent heat of vaporization of water, which is 22.6 × 10⁵ J/kg. First, we need to calculate the amount of heat added to the system. The heat required to vaporize the 15.0 g of water is given by Q = m × L, where m is the mass of water and L is the latent heat of the vaporization of water. Substituting the given values, we get Q = 15.0 g × 22.6 × 10⁵ J/kg = 3.39 × 10⁴ J. Next, we need to calculate the temperature in Kelvin. The temperature remains constant at 100°C during the phase change, so we can simply add 273.15 to get the temperature in Kelvin. Therefore, T = 100°C + 273.15 = 373.15 K. Finally, we can use the formula ΔS = Q/T to calculate the change in entropy. Substituting the calculated values, we get ΔS = 3.39 × 10⁴ J / 373.15 K = 90.8 J/K. Therefore, the change in entropy when 15.0 g of water at 100°C is turned into steam at 100°C is 90.8 J/K.

Learn more about change in entropy here:

https://brainly.com/question/30691597

#SPJ11

Therefore, we can conclude that the initial kinetic energy of the system of two boxes is greater than the final kinetic energy, since some of the initial kinetic energy is lost during the collision.

In the initial state, the left box has kinetic energy while the right box is at rest and has zero kinetic energy. The total kinetic energy of the system is the sum of the kinetic energy of the left box, which we'll call K1, and the kinetic energy of the right box, which is zero. Therefore, the total initial kinetic energy is K = K1 + 0 = K1.

When the two boxes collide and stick together, they move as a single object with a smaller velocity than the initial velocity of the left box. Since the final velocity is smaller than the initial velocity, the final kinetic energy of the system is also smaller than the initial kinetic energy. This is due to the conservation of energy principle, which states that the total energy in a closed system remains constant. In this case, the initial kinetic energy of the system is converted into other forms of energy, such as heat and sound, during the collision.

To know more about kinetic energy,

https://brainly.com/question/20626677

#SPJ11

The screen should be placed at a distance of approximately 0.97 m from the slit in order for the first minimum in the diffraction pattern to be 0.89 mm from the central maximum.

The distance from the slit to the screen, also known as the distance of the observation, can be calculated using the formula for the position of the first minimum in a diffraction pattern:
sinθ = λ / d

where θ is the angle between the central maximum and the first minimum, λ is the wavelength of light, and d is the width of the slit.

In this case, we are given the wavelength of light to be 589.0 nm and the width of the slit to be 0.64 mm. Therefore, we can solve for sinθ and then use the small angle approximation sinθ ≈ tanθ to find the distance from the slit to the screen:
sinθ = λ / d = 589.0 nm / 0.64 mm = 0.9187
tanθ ≈ sinθ = 0.9187
distance = (0.89 mm) / tanθ ≈ 0.97 m

Therefore, the screen should be placed at a distance of approximately 0.97 m from the slit in order for the first minimum in the diffraction pattern to be 0.89 mm from the central maximum.

Learn more about diffraction pattern here:

https://brainly.com/question/12290582

#SPJ11

After a rock that is thrown straight up reaches the top of its path and is starting to fall back down, its vertical acceleration is 10m/s/s downward (option a), neglecting air resistance. This is because the force of gravity acts straight down on the rock, causing it to accelerate downwards at a rate of 10m/s/s.

When the rock reaches the top of its path and begins to fall back down, its vertical acceleration is 10 m/s/s downward. This is owing to the fact that the acceleration caused by gravity, which is equivalent to 10 m/s/s downhill at Earth's surface, stays constant. The boulder is just subject to gravity, disregarding air resistance, therefore its rate of acceleration is constant and equal to 10 m/s/s downward during its travel. Therefore, 10m/s/s downward is the correct response (a).

learn more about  rock here:

https://brainly.com/question/19930528

#SPJ11

The speed of a satellite in an elliptic orbit at either end of the minor axis is the same as the circular speed at that point because the centripetal force is the same at both points.

A satellite is an artificial object that has been intentionally placed into orbit around the Earth or other celestial body. It can be used for a variety of purposes, including communications, navigation, Earth observation, and scientific research. Communications satellites are used for television, telephone, and internet services; navigation satellites provide global positioning system (GPS) services; Earth observation satellites are used for remote sensing and environmental monitoring; and scientific research satellites are used to study the Earth, other planets, and outer space.

The centripetal force is the force that causes an object to move in a curved path and is equal to the product of the object's mass and its velocity squared, divided by its radius. At the ends of the minor axis, the radius of the orbit is the same and the mass of the object is the same, so the centripetal force is the same. This means that the velocity of the object is also the same, and thus the speed of a satellite in an elliptic orbit at either end of the minor axis is the same as the circular speed at that point.

To learn more about satellite
https://brainly.com/question/31596559
#SPJ4

The angular momentum of of a 3.4- kg uniform cylindrical grinding wheel of radius 23 cm when rotating at 1200 rpm is 2.53 x 10³ kg⋅m²/s.

To solve this problem, we need to use the formula for the angular momentum of a rotating object: L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.

For a uniform cylindrical object, the moment of inertia is given by I = 1/2 mr², where m is the mass and r is the radius.

We first need to convert the angular velocity from rpm to radians per second:  ω = (2π/60)(1200 rpm) = 125.66 rad/s. Next, we can plug in the values for the mass and radius of the grinding wheel:

I = 1/2 (3.4 kg) (0.23 m)² = 0.088 kg⋅m². Finally, we can calculate the angular momentum:  L = Iω = (0.088 kg⋅m²) (125.66 rad/s) = 2.53 x 10³ kg⋅m²/s.

To know more about angular momentum, refer here:

https://brainly.com/question/28760920#

#SPJ11

if the intervening cluster of galaxies has a larger mass and a more concentrated mass distribution, the gravitational lensing effect will be stronger, and the images of the distant galaxy will appear more widely separated.

The gravitational field of a massive object, such as a cluster of galaxies, can act as a gravitational lens and bend the path of light coming from a distant object located behind it. This effect can produce multiple images of the distant object, which can be observed from Earth.

The separation between the lensed images of the distant galaxy depends on the mass distribution of the cluster of galaxies and the geometry of the lensing process. Specifically, the separation between the images is larger when the gravitational potential well of the lensing object is deeper, which corresponds to a larger mass and a more concentrated mass distribution.

To learn more about cluster visit:

brainly.com/question/29855077

#SPJ11

Answer:

B. specific heat

Explanation:

the heat required to raise the temperature of the unit mass of a given substance by a given amount (usually one degree).

Halving the amplitude and doubling the frequency of the pulses will result in no change in the average power output.

Power output is determined by both the amplitude and the frequency of the pulses. The formula for power is P = (1/2)AV²f, where P is power, A is amplitude, V is voltage, and f is frequency. When the amplitude is halved, the voltage is also halved, but when the frequency is doubled, the voltage increases by the square root of 2.

So, the net effect of halving the amplitude and doubling the frequency is that the voltage stays the same. Since power is proportional to the square of the voltage, there is no change in the average power output. However, it is important to note that the instantaneous power output will fluctuate due to the changes in amplitude and frequency, but over time, the average power will remain the same.

Learn more about amplitude here:

https://brainly.com/question/9525052

#SPJ11

(a) Since there is no friction, the center of mass (cm) of the system will be located exactly halfway between the woman and the man. Therefore, the cm is located 5.0 m from the woman.

(b) When the man pulls on the rope and moves 2.5 m, the woman will also move a certain distance towards the man. Since the system is still frictionless, the distance the woman moves will be the same as the distance the man moves. Therefore, the man will now be 7.5 m from the woman (10.0 m - 2.5 m).

(c) In order to determine how far the man will have moved when he collides with the woman, we need to use conservation of momentum. Since the system is isolated and there are no external forces acting on it, the momentum of the system will be conserved. Initially, the total momentum of the system is zero since the woman and man are at rest. When the man pulls on the rope and moves towards the woman, he gains momentum and the woman loses an equal amount of momentum. When they collide, their momenta will cancel out and the total momentum of the system will be zero again.

Using the conservation of momentum equation (m1v1 + m2v2 = m1v1' + m2v2'), where m is the mass and v is the velocity of each object, we can solve for the final velocity of the man and woman when they collide. Since the woman is initially at rest, her initial velocity (v1) is zero. Therefore:

(72 kg)(0 m/s) + (55 kg)(0 m/s) = (72 kg)v2' + (55 kg)v1'

Simplifying and solving for v2':

v2' = - (55 kg)(0 m/s) / 72 kg

v2' = 0 m/s

This means that the woman and man will have the same velocity when they collide (zero), so the distance the man will have moved is equal to the distance the woman will have moved when they collide. Since the man initially moved 2.5 m towards the woman, and the cm of the system is located 5.0 m from the woman, the distance the man will have moved when he collides with the woman is:

5.0 m - 2.5 m = 2.5 m
Hello! I'm happy to help with your question. Let's break it down step-by-step:

a) To find the center of mass (CM) between the woman and the man, we use the following formula:

CM = (m1 * x1 + m2 * x2) / (m1 + m2)

where m1 and m2 are the masses of the woman and the man, and x1 and x2 are their positions.

In this case, we can set the woman's position as 0m and the man's position as 10m. So:

CM = (55 * 0 + 72 * 10) / (55 + 72) = 720 / 127 ≈ 5.67m

The center of mass is approximately 5.67m from the woman.

b) When the man pulls on the rope and moves 2.5m towards the woman, his new position is 7.5m (10m - 2.5m) from her.

c) To find out how far the man will have moved when he collides with the woman, we can assume that the center of mass remains constant. Let x be the distance the man moves toward the woman:

CM = (55 * x + 72 * (10 - x)) / (55 + 72) = 5.67 (from part a)

Solving for x:

5.67 * 127 = 55 * x + 720 - 72 * x

721.29 = -17 * x + 720

1.29 = 17 * x

x ≈ 0.076m

So, the man will have moved approximately 0.076m further when he collides with the woman.

To know more about  frictionless visit:

brainly.com/question/1729111

#SPJ11

The resistance of a rod does NOT depend on its shape. Resistance is determined by the material, length, cross-sectional area, temperature, and conductivity of the rod. Shape does not play a role in the resistance of a rod.

Resistance is the opposition of a material or substance to the flow of electric current or the opposition of an electric circuit to a change in current or voltage. It is measured in ohms and is symbolized by the Greek letter Omega (Ω). Resistance is a basic property of all electrical and electronic components and is the reason why they can be used to control and regulate the flow of electricity. Resistance can be used to limit the flow of current, create a voltage drop, and even convert AC to DC. Resistance also has the capability to dissipate energy in the form of heat, which can be beneficial in some applications.

To learn more about Resistance
https://brainly.com/question/17563681
#SPJ4

The raft does not move relative to the water.

The center of mass of the person-raft system remains in the same position throughout the motion because there are no external forces acting on the system. When the person moves from one end of the raft to the other end, the center of mass of the system moves a distance equal to the distance moved by the person, but in the opposite direction. Therefore, the raft moves the same distance but in the opposite direction, such that the center of mass of the system remains stationary.

In the absence of friction between the raft and the water, the raft does not move relative to the water when a person moves from one end of the raft to the other end.

To know more about motion, visit;

https://brainly.com/question/26083484

#SPJ11

The brightness of a star is determined by its temperature and radius.

The brightness of a star is determined by its temperature and radius. In this case, the two stars have the same temperature, but one has a radius twice as large as the other. The brightness of a star is proportional to the square of its radius and its temperature to the fourth power (Stefan-Boltzmann Law).
Since the temperature is the same, we can focus on the radius difference. The larger star has a radius twice that of the smaller star, so we square this ratio to find the brightness difference: (2R)^2 / (R^2) = 4.
Therefore, the larger star is 4 times brighter than the smaller star.

To know more about brightness of star visit:

brainly.com/question/12500676

#SPJ11

The wagon's acceleration is 3.0 m/s/s.

To find the wagon's acceleration, we can use Newton's second law of motion is, which states that the force acting on an object in motion is equal to the object's mass multiplied by its acceleration, the formula is F = ma, where F is the force applied to the wagon, m is the mass of the wagon, and a is the acceleration. In this case, the force applied to the wagon is 30N and the mass of the wagon is 10kg. So, we can plug these values into the formula:
30N = 10kg x a
Solving for a, we get:
a = 30N / 10kg
a = 3.0m/s/s
So the wagon's acceleration is 3.0m/s/s. This means that for every second the wagon is pulled with a force of 30N, its speed increases by 3.0m/s. It is important to note that the direction of the acceleration is in the direction of the force applied, which in this case is forward.

To learn more about acceleration, click here:
https://brainly.com/question/2303856

#SPJ11

The voltage across the terminals of a 23,2 resistor that has 0.065 A of current flowing through it is C 1.5 V

The capacity of the resistor = 23.2

Current flow = 0.065A

Voltage is a gauge of how powerful a circuit's current is. It is what "pushes" the current to a gadget through the circuit. Voltage is specifically defined as the variation in electrical energy between two places in a circuit. Ohm's law, which says that voltage (V) is equal to current (I) multiplied by resistance (R), may be used to compute the voltage across a resistor:

V = I x R

Substituting the values in the formula -

V = 0.065 A x 23.2 Ω

= 1.512 V

Read more about voltage on:

https://brainly.com/question/14883923

#SPJ1