Answer:
[tex]m=243.72g[/tex]
Explanation:
Hello,
For the given chemical reaction:
[tex]CaO(s) + 3 C(s) \rightarrow CaC_2(s) + CO(g)[/tex]
Whose heat of reaction is 464.8 kJ/mol which means that energy is absorbed due to the chemical reaction, we can compute the moles of calcium carbide via the following relationship:
[tex]n=\frac{1770kJ}{464.8 kJ/mol}\\ \\n=3.81mol[/tex]
Then, since the molar mass of calcium carbide is 64 g/mol, the yielded mass turns out:
[tex]m=3.81mol*\frac{64g}{1mol}\\ \\m=243.72g[/tex]
Best regards.
What isotope has 18 protons and 22 neutrons?
Answer:
Argon.
Explanation:
Argon is the element having 18 protons and 22 neutrons present in its nucleus. so its atomic number is 18 and mass number is 40 if we added both number of protons and neurons. Argon belongs to noble family due to completion of outermost shell and non reactive nature. It is the third most abundant gas about 0.934% present on the earth after nitrogen and oxygen.
Q1. Briefly explain why the Zeff experienced by a valence electron in Cl is larger than in Mg. Q2. Briefly explain why the Zeff difference described in Q1 explains why the radius of Cl is smaller than the radius of Mg. Q3. Briefly explain, in terms of the principal quantum number (n), why the radius of Ba is larger than the radius of Mg.
Answer:
See explanation
Explanation:
Q1:
Chlorine has 17 protons while magnesium has only 12 protons. Recall that the Zeff depends on the size of the nuclear charge. The greater the size of the nuclear charge, the larger the Zeff experienced by a valence electron.
Q2:
The larger the Zeff, the smaller the atomic radius. Since the valence electrons of Cl experience a greater Zeff than those of Mg due to greater size of the nuclear charge, the atomic radius of chlorine will be smaller than that of Mg.
Q3:
The radius of an atom increases as the value of the principal quantum number (n) increases down the group due to addition of more shells. The greater the number of shells added, the greater the principal quantum number (n) and the greater the atomic radius, hence the answer.
Ice Select one: a. is a crystal of water molecules packed in an open structure stabilized by hydrogen bonds. b. is less dense than liquid water. c. contains 17% more hydrogen bonds then water. d. all of the statements above are true. e. none of the statements above are true.
Answer:
All of the statements above are true.
Explanation:
Ice is solid water. Ice consists of an array of water molecules arranged into a crystal lattice. Ice has spaces between the water molecules so it is less dense than liquid water. Ice is about 9% less dense than liquid water. This accounts for the fact that it floats on water.
Ice contains more hydrogen bonds per water molecule when compared to liquid water.
what are limitations of an egg without the shell but has a very thin layer holding it all together
Answer:
As a hen ages, the eggs that she lays get gradually larger. However, the calcium content deposited in the shell remains the same despite the size of the egg. So the eggshells become thinner as the hen ages.
Explanation:
Use the density formula to solve the following problems. A sample of a substance has a volume of 60.5 mL and a density of 1.20 g/mL. What is the mass of the sample?Use the density formula to solve the following problems.
Answer:
72.6 g
Explanation:
Step 1: Given data
Volume of the substance (V): 60.5 mLDensity of the substance (ρ): 1.20 g/mLMass of the substance (m): ?Step 2: Calculate the mass of the substance
The density of a substance is equañ to its mass divided by its volume. The density formula is:
ρ = m/V
m = ρ × V
m = 1.20 g/mL × 60.5 mL
m = 72.6 g
The electrode that contains the item to be electroplated
a) anode
b)cathode
The electrode that contains the item to be electroplated is a cathode. The correct option is B.
What are electrodes?
Electrodes are a source of conductance of electron and behaves as a conducting material for the current too it is of two types mostly the cathode and the anode.
The anode is responsible for oxidation mostly called oxidation half cell and releases the electron while the cathode is responsible for the gain of electrons and deposition of the material as electroplated and called reduction half cell.
Therefore cathode is an electrode that contains the item to be electroplated. Option B is correct.
Learn more about electrodes, here:
https://brainly.com/question/17060277
#SPJ6
Describe the size and scale of an atom. Explain the relative of the nucleus in relation to the size of an entire atom.
Size of an atom:
Diameter is 10^-10Size of a nucleus:
Diameter 10^-15As you can see, the nucleus is significantly smaller than the atom which is quite superb if you ask me. An atom is the smallest particle that can create a chemical composition.
Best of Luck!
10. A small gold nugget has volume of 0.87 cm3. What is its mass if the density of gold is 19.3 g/cm3?
Answer:
16.791 grams
Explanation:
The density formula is:
[tex]d=\frac{m}{v}[/tex]
Rearrange the formula for m, the mass. Multiply both sides of the equation by v.
[tex]d*v=\frac{m}{v}*v[/tex]
[tex]d*v=m[/tex]
The mass of the gold nugget can be found by multiplying the density and volume. The density is 19.3 grams per cubic centimeter and the volume is 0.87 cubic centimeters.
[tex]d= 19.3 g/cm^3\\v-0.87 cm^3[/tex]
Substitute the values into the formula.
[tex]m=d*v[/tex]
[tex]m= 19.3 g/cm^3*0.87 cm^3[/tex]
Multiply. Note that the cubic centimeters, or cm³ will cancel each other out.
[tex]m=19.3 g*0.87[/tex]
[tex]m=16.791 g[/tex]
The mass of the gold nugget is 16.791 grams.
I need help answering these Significant Figures - precise measurements questions
1) 0.00030 = ______ 2) 3.3 x 108 = ______ 3) 1000 = ______
4) 3.50 x 107 = ______ 5) 2.100 x 10-1 = ______ 6) 1101 = ______
7) 0.043 = ______ 8) 0.09730 = ______ 9) 2010 = ______
10) 3060 = ______ 11) 43.8 = ______ 12) 0.00810 = ______
13) 5.0 x 10-4 = ______ 14) 8.570 x 10-8 = ______ 15) 7.500 x 103 = ______
Add/ Subtract Sig Fig: Solve and Round accordingly.
1) 2.6391 + 34.3124 + 1.22 = _______ 8) 94.1 + 5.7 = _______
2) 3.9 + 9.7113 + 38.9223 = _______ 9) 81.29 - 75.7 = _______
3) 9.9 + 77.1135 + 2.226 = _______ 10) 61.741 + 6.632 = _______
4) 7.8 + 17.2 = _______ 11) 6.1 + 28.2 + 94.229 = _______
5) 6.219 - 2.9 = _______ 12) 8.1732 - 1.933 = _______
6) 9.8 + 27.771 = _______ 13) 81.87 + 3.37 + 4.8421 = _______
7) 4.48 + 7.2155 + 13.9 = _______ 14) 17.56 - 6.4929 = _______
Multiply/Divide Sig Fig: Solve and round accordingly
1) 0.005 x 81.327 x 1000 = __________ 9) 0.0027 x 1.554 x 3090 = __________
2) 5 x 268 = __________ 10) 38.245 x 0.0069 = __________
3) 565 x 0.0054 x 4040 = __________ 11) 89.0 x 19.13 x 8400 = __________
4) 100 ÷ 2.0 = __________ 12) 208 ÷ 7.6 = __________
5) 4 x 23 = __________ 13) 34 x 800 = __________
6) 5006 ÷ 5.979 = __________ 14) 204 ÷ 92.731 = __________
7) 80 ÷ 8.1 = __________ 15) 300 ÷ 98.434 = __________
8) 0.4 x 0.003 x 2400 = __________ 16) 0.031 x 0.007 x 100 =
Answer:
[tex]3.0 x {10}^{4} [/tex]
Suppose that a substance in a beaker is heated over a burner in a science lab. Which observation would most likely indicate that a chemical change has occurred in the substance?
If the substance is a liquid or solid, an increase in temperature would indicate a chemical change.
If the substance is a liquid, a change of some of the liquid to gaseous form would indicate a chemical change.
If the substance is a solid, a change of some of the solid to liquid form would indicate a chemical change.
If the substance is a liquid or solid, production of an odor would indicate a chemical change.
Answer:
its D
Explanation:
Answer:
D
Explanation:
Draw the products formed when 2−propanol [(CH3)2CHOH], the main ingredient of rubbing alcohol, is treated with H2SO4.
Answer:
Explanation:
Elimination reaction occurs when 2−propanol [(CH3)2CHOH] is treated with H2SO4, this is because the H2SO4 is a dehydrating agent. With concentrated tetraoxosulphate (VI) acid at 180°C, 2 - propanol reacts to form a conjugate acid and a conjugate base.
The reaction formation and the products can be seen in the attached image below.
What are the conjugate acid-base pairs in the reaction of H2SeO4 with H2O?H2SeO4+H2O→products
Answer:
Conjugate acid- H2SeO4
Conjugate base- H2O
Explanation:
The full equation of the reaction is; H2SeO4(aq) + H2O(aq)-->H3O^+( aq) + HSeO4^-(aq).
The conjugate acid is the specie that donates a proton to the conjugate base, hence H2SeO4 is the conjugate acid while H2O is the conjugate base because it accepts a proton from H2SeO4, hence the answer above.
11. A 100% silver ring would be an example of a
a) Pure substance
b) Mixture
c) Really nice gift
d) Compound
Answer:
a pure substance or a compound
Answer:
a pure substance
Explanation:
Any substance made from a single material is pure. Silver is an element just like all the others listed on the periodic table, so a block of silver is pure.
1. A homogeneous mixture of 2 or more metals is called an
a. alloy
C. covalent bond
b. anion
d. chemical bond
what element does this Bohr show ?
Which element has a gas notation of [Kr]5s2 4d7
How many unpaid electrons are in 1s2 2s2 2p6 3s2 3p6
Answer:
No unpaired electrons
Explanation:
This is because it is diamagnetic. Hope that helps:)
Answer:
As we can see, the first shell has its 2 electrons
the second shell has its 8 electrons
we know that the third shell also needs 8 electrons and we can see that the third shell also has 8 electrons.
Therefore, all the shells of this atom are filled and this atom is stable
So we can say that there are no unpaired electrons
Kindly mark Brainliest, thanks
Select the correct answer.
A bicycle traveled 150 meters west from point A to point B. Then it took the same route and came back to point A. It took a total of 2 minutes for
the bicycle to return to point A. What is the average speed and average velocity of the bicycle?
ОА.
The average speed is 2.5 meters/second, and the average velocity is
2.5 meters/second east.
OB
The average speed is O meters/second, and the average velocity is
2.5 meters/second east.
Ос.
The average speed and average velocity are both O meters/second.
OD. The average speed is 2.5 meters/second, and the average velocity is
O meters/second.
Arrange these elements according to first ionization energy.
highest to lowest ionization energy
Li
N
Be
C
B
F
O
Ne
Answer:
please find the attached file.
Explanation:
In the attachment file, we define the order of the ionization of the energy.
As its components are seen, their energy of ionization rises and falls further. Nitrogen and oxygen were detected as an anomaly. Nitrogen has more IE than oxygen because Nitrogen has the [tex]2p^3[/tex] configuration to Is half-filled It's got bigger IE than B. As, be making the 2s2 configuration fully disc.
Arrangement of elements according to first ionization energy from
highest to lowest ionization energy are Ne>F>O>N>C>B>Be.
Neon, a noble gas with a fully filled electron shell, has the highest ionisation energy of the substances on this list, making it the most stable and least likely to lose an electron. Fluorine has the second-highest ionisation energy, after helium. Due to its strong electron attraction, it is a highly electronegative element, making it more challenging to remove an electron from its outer shell. The ionisation energy of oxygen is third highest. Additionally, it has a high electronegativity and expels an electron with a lot of energy.
The fourth-highest ionisation energy is that of nitrogen, abbreviated as N. In terms of electronegativity, it is comparable to oxygen and requires a lot of energy to remove one electron. Carbon has the fifth-highest ionisation energy, after hydrogen and helium. An enormous amount of energy is needed to take an electron out of its outer shell. The second-lowest ionisation energy on this list belongs to borax, abbreviated as B. Compared to the other elements, boron is simpler to remove an electron from. Beryllium, symbol Be, has the lowest ionisation energy of all the elements on this list. From among these elements, an electron can be taken out the simplest.
To know more about ionization energy, here:
https://brainly.com/question/33907239
#SPJ6
Bromine gas in a container is heated over a flame. What happens to the average kinetic energy of the bromine
particles?
Olt decreases rapidly.
It increases quickly.
O It remains the same.
O It decreases slowly.
Answer:
The answer is b
Explanation:
I got my answer off of quizlet
Answer:
B) It increases quickly.
Explanation:
Edg 2020
QUESTION 17
If the theoretical yield of the following reaction is 3.43g of MgO and the actual yield is 2.48g of Mgo, what is the percent yield?
O 1.38%
O 72.3%
O 0.723%
138%
Answer:
72.3%
Explanation:
The following data were obtained from the question:
Theoretical yield of MgO = 3.43 g
Actual yield of MgO = 2.48g
Percentage yield of MgO =.?
Percentage yield of a reaction can simply be obtained by dividing the actual yield by the theoretical yield multiplied by 100. This is illustrated below:
Percentage yield = Actual yield /Theoretical yield × 100
Thus, we can obtain the percentage yield of MgO as follow:
Theoretical yield of MgO = 3.43 g
Actual yield of MgO = 2.48g
Percentage yield of MgO =.? Percentage yield = Actual yield /Theoretical yield × 100
Percentage yield = 2.48/3.43 × 100
Percentage yield = 72.3%
Therefore, the percentage yield of MgO is 72.3%.
How do an independent variable and a dependent variable differ in a scientific investigation?
Answer:
stop cheating and be smart
Explanation:
ugh sjdjdkxkdkdkdkdkdkdahahahajajaja
In a galvanic cell:______.a. reduction occurs at the (name of electrode) _____________b. the anode is the (sign) electrode anions flow in solution toward the (name of electrode)__________ ___________ electrons flow from the (name of electrode) to (name of electrode) ________ _______
Answer:
In a galvanic cell:
a. reduction occurs at the cathode.
b. the anode is the (-) electrode. Anions flow in solution toward the anode. Electrons flow from the anode to the cathode.
Explanation:
The experimental apparatus for generating electricity through the use of a spontaneous reaction is called a galvanic cell or voltaic cell.
By definition, the anode in a galvanic cell is the electrode at which oxidation occurs and the cathode is the electrode at which reduction occurs.
To complete the electrical circuit, the solutions must be connected by a conducting medium through which the cations and anions can move from one electrode compartment to the other. This requirement is satisfied by a salt bridge, which, in its simplest form, is an inverted U tube containing an inert electrolyte solution, such as KCl or NH₄NO₃, whose ions will not react with other ions in solution or with the electrodes.
During the course of the overall redox reaction, electrons flow externally from the anode through the wire to the cathode. In the solution, the cations move toward the cathode, while the anions move toward the anode.
An electric current flows from the anode to the cathode because there is a difference in electrical potential energy between the electrodes.
A common example of a galvanic cell is the Daniell cell, with Zn and Cu electrodes and ZnSO₄ and CuSO₄ solutions.
The table below shows some information about four different elements.
Element
Classification
Density (g/cm³)
barium (Ba)
metal
3.6
beryllium (Be)
metal
1.8
chromium Cr)
metal
7.2
phosphorus P)
nonmetal
1.8
A cube of an unknown element has a shiny, silvery color. The side of the cube measures 2.0 cm and the cube has a mass of 14.56 g.
Based on the information in the table, which element makes up the cube?
Answer:beryllium
Explanation:
Explain why mass cannot be used as a property to identify a sample of matter.
Mass is an extensive property hence it cannot be used as a property to identify a sample of matter.
The properties of matter can generally be classed into two categories;
Intensive propertiesExtensive propertiesIntensive properties of matter are those properties of matter that do not depend of the amount of matter present. In other words, they are characteristic of a particular kind of matter. Examples of such properties include, density, boiling point, etc.
Extensive properties depend on the amount of matter present. They include; mass, weight, etc.
Intensive properties serve as a sort of fingerprint that identifies a substance.
Extensive properties such as mass only measure the amount of matter in a sample and can not be used to identify a sample of matter.
Learn more: https://brainly.com/question/17889594
Calculate the mass of a piece of metal if its volume is 2.3cm^3 and density is .486g/cm^3
Answer:
1.1178 g
Explanation:
The product of volume and density is mass:
(2.3 cm^3)(0.486 g/cm^3) = 1.1178 g
_____
It would be a very unusual piece of metal that would float higher in water than most kinds of wood. The given "metal" at (0.486) has less than 3/4 the density of birch (at 0.67), which is a pretty light wood.
i need help simplifying 4+7(x+3)
Answer:
7x+25
Explanation:
Calcium reacts with water to produce hydrogen and slightly soluble calcium
hydroxide, Ca(OH)2.
Ca(s) + 2 H20(1) --> Ca(OH)2(aq/s) + H2(g).
What will be the volume of hydrogen produced at 27°C and 7.00 x 102 torr when 25
g of calcium and 25 g of water react?
Answer:
[tex]V=16.65L[/tex]
Explanation:
Hello,
In this case, considering that both 25 g of calcium and water react, the first step is to identify the limiting reactant by considering the yielded moles of hydrogen for the same amount of reactant as follows:
[tex]n_{H_2}^{from\ Ca}=25gCa*\frac{1molCa}{40.1gCa}*\frac{1molH_2}{1molCa} =0.623molH_2\\\\n_{H_2}^{from\ H_2O}=25gH_2O*\frac{1molH_2O}{18gH_2O}*\frac{1molH_2}{2molH_2O}=0.694molH_2[/tex]
Thus, since calcium yields a smaller amount of hydrogen, it is the limiting reactant so 0.623 moles of hydrogen are yielded. In such a way, by using the ideal gas equation one finds the volume as follows:
[tex]V=\frac{nRT}{P}=\frac{0.623mol*0.082\frac{atm*L}{mol*K}*300K}{700torr*\frac{1atm}{760 torr} } \\ \\V=16.65L[/tex]
Best regards.
Question 3. Which of these best describes the field of engineering? *
Please help
A high protein diet contains 70.0g of carbohydrates, 5.0g of Fat, and 150g of protein. How much energy, in kilocalories, and kilojoules, does each diet provide? Round answers off to tens place
Answer:
925kcal, 3870.2kJ.
Explanation:
The calorie densities of these energy sources are:
Carbohydrates: 4kcal/g
Fat: 9kcal/g
Protein: 4kcal/g
70.0g of carbohydrates are:70.0g * (4kcal/g) = 280kcal
5.0g fat * (9kcal/g) = 45kcal
150g protein * (4kcal/g) = 600kcal
The energy in kilocalories is 600+280+45 = 925kcal
As 1kcal is 4.184kJ. 925kcal are:
925kcal * (4.184kJ/1kcal) = 3870.2kJ
