calculate the molarity and the molality of an nh3 solution made up of 40.0 g of nh3 in 70.0 g of water. the density of the solution is 0.982 g/ml. webassign will check your answer for the correct number of significant figures. 33.0 incorrect: your answer is incorrect. your response differs from the correct answer by more than 10%. double check your calculations. m webassign will check your answer for the correct number of significant figures. 33.0 incorrect: your answer is incorrect. m

The potential energy of CO2 just increases.

Potential energy is the energy that exists in an object because of the object's location in a force field.

The elements that influence the existence of potential energy are gravity, the mass of objects, and the height of objects.

The characteristics of potential energy are as follows.

- Every object that has gravitational potential energy can do work or work, if the object is towards the surface of the Earth.

- Potential energy is affected by the acceleration due to gravity and the height of the object.

- The higher and the greater the mass of an object, the greater the potential energy.

- If the object is above the ground, then the potential energy is zero.

- Potential energy possessed by objects because of their position relative to the earth.

Learn more about potential energy at https://brainly.com/question/24284560.

#SPJ4

1) crust 2)mantle 3) asthenosphere 4)core 5) hydrosphere are the correct matches for the given options.

A atomic number 26 & chemical symbol Fe are given to the element iron. It is a metal that belongs to the first transition series and the eight group of a periodic table. It is the most common element on the planet by mass, just above of oxygen, and makes up a significant amount of both the outer and inner core of the planet.

Iron is found in substantial amounts in hemoglobin, a type of protein found in red blood cells that delivers oxygen from lungs to each and every part of the body. If the body doesn't have enough iron, it won't produce enough red blood cells to deliver oxygen, which leads to fatigue.

To know more about iron visit

https://brainly.com/question/18500540

#SPJ4

Electron domain geometry of the central chlorine atom in this molecule has one lone pair on the core Cl atom, due to it's existence the structure of HClO3 has a trigonal pyramidal.

Trigonal planar bond angle is 1200. But because there are numerous double bonds and lone pairs, the bond angle around the core Cl atom is less than 1200.

Two single bonds and two nonbonding lone pairs make up the four domains of H2O. The steric number is another name for the electron domain. The configuration of the electron domains that surround the primary atom in a molecule or ion is known as the electron domain geometry.

The formal precursor of chlorate salts is chloric acid, often known as HClO3, which is an oxoacid of chloride.

Learn more about Electron domain geometry here:

brainly.com/question/18612295

#SPJ4

Answer:

Unlike protons and neutrons, which are located inside the nucleus at the center of the atom, electrons are found outside the nucleus. Because opposite electric charges attract each other, negative electrons are attracted to the positive nucleus.

A positron is a particle emitted from the nucleus that has a positive charge and same mass as an electron.

An electron is a subatomic particle with a negative charge that can be free or bound to an atom. One of the three primary types of particles found within an atom is an electron that is bound to it; the other two are protons and neutrons.

A positron is the antiparticle of an electron. This means that it has the same mass as an electron but has the opposite charge. The mass of a particle is determined by the properties of the particle itself, while the charge is determined by the interaction of the particle with other particles or fields. The fact that positrons have the same mass as electrons but have a positive charge is a fundamental property of the universe and is a result of the symmetries that govern the behavior of subatomic particles.

To know more about subatomic particles, visit:

https://brainly.com/question/29765133

#SPJ4

To balance the redox reaction in basic solution between cyanide and silver, first write the unbalanced equation containing all the reactants and products of the chemical reaction.

Ag(s) + CN-(aq) + O2(aq) → Ag(CN)2- + OH-(aq)

Subsequently, the redox reaction is divided into partial reactions, that is, the oxidation and reduction reactions are indicated, determining the oxidation numbers of each atom that appears in the reaction.

Ag0 + C+2N-3- + O02 → Ag+1(C+2N-3)2- + O-2H+1-

The redox pairs of all atoms that have been oxidized and all atoms that have been reduced are then identified.

Subsequently, the redox couples combine in two partial reactions: one oxidation and one reduction.

Then the atoms in the partial equations are balanced by adding the appropriate coefficient in front of the formula.

Ag0 + 2CN- → Ag+1(C+2N-3)2- + e-

Next, the number of electrons lost and received is equalized, we will multiply the two equations by the factor that will give the least common multiplier.

Add the partial equations so that on one side are all the products and on the other are all the reactants.

4Ag0 + O02 + 8CN- + 4e- + 4H2O → 4Ag+1(C+2N-3)2- + 2H+12O-2 + 4e- + 4OH-

The equation is reduced by dividing by the greatest common divisor so that the coefficients are the minimum possible.

4Ag0 + O02 + 8CN- + 2H2O → 4Ag+1(C+2N-3)2- + 4OH-

Finally, the balance of charges and elements is verified.

Learn more about the redox reaction at https://brainly.com/question/13293425

#SPJ4

He (c). He has the highest average kinetic energy per mole at 298 K.

Kinetic energy is the energy of motion. It is energy that an object has because of its motion. Kinetic energy can be found in both moving objects and particles, such as a ball rolling down a hill, a car moving down a highway, or electrons moving around an atom. Kinetic energy is determined by the mass of the object and its velocity.

Because it has the most number of atoms per mole compared to the other gases listed (2 atoms per mole for He, compared to 2 atoms per mole for H2, 16 atoms per mole for H2O, and 32 atoms per mole for CO2). The higher number of atoms per mole means more kinetic energy per mole, resulting in He having the highest average kinetic energy per mole.

To learn more about kinetic energy
https://brainly.com/question/7694005
#SPJ4

The answer is not provided, as the amount of nitric oxide produced depends on the amount of ammonia used in the reaction.

Nitric oxide (NO) is a colorless and odorless gas that acts as a signaling molecule in the human body. It is produced within the cells of many organisms, including humans, and plays an important role in many physiological and pathological processes. It is a key component of the cardiovascular system, where it is responsible for regulating blood pressure, dilating arteries, and preventing platelet aggregation. NO also acts as a neurotransmitter in the nervous system, where it is involved in learning, memory, and pain modulation. In addition, it has anti-inflammatory and anti-tumor properties and is involved in wound healing and immune functioning. NO also plays a role in the regulation of cell metabolism and growth.

To learn more about nitric oxide
https://brainly.com/question/29340714
#SPJ4

According to the claim made, an electron transport chain produces the majority of water.

In a chemical reaction, one or more chemicals, usually known as reactants, change into same or more other compounds, frequently referred to as products.

In this process, the electron transport chain is where the majority of the water is created. Either NADH or FADH2 contribute high energy electron carriers chain. When an electron enters an electron transport chain, its energy steadily decreases. Most of the water generated in the aforementioned process is created by low-energy electron reduction of oxygen molecules.

When 2-phosphoglycerate is transformed into phosphoenol pyruvate during the glycolysis process, two droplets are created for every molecule of glucose. At the stage where Acetyl-CoA exits the Kreb Cycle but also is coupled to Oxaloacetate by Hydroxide Synthase to form Sulphate and at the step where Fumerate is reduced to Malate by Water with the aid of Fumerase, two water molecules are input into the Kreb Cycle. Ethanol, lactic acid, carbon dioxide, and hydrogen gas are byproducts of fermentation. Therefore in method, there is no byproduct of water.

To know more about Reaction visit:

brainly.com/question/25769000

#SPJ4

1 mole of argon and 16.0g of oxygen gas has 6.02 x 10^23 atoms. Thus Option A and Option D are the answers.

A mole is a unit of measurement used in chemistry to represent the amount of a substance. It is defined as the number of entities (atoms, molecules, ions, etc.) in a substance that is equal to Avogadro's number, which is 6.02 x 10^23.

This number is the same for any substance, regardless of its atomic or molecular weight. The mole is used to convert between mass and number of atoms or molecules.

For example, 1 mole of a substance contains 6.02 x 10^23 atoms or molecules, and the mass of 1 mole of a substance is its molar mass, which can be found from its chemical formula or atomic weight. In the case of the options presented, 1 mole of argon and 16.0g of oxygen gas both contains 6.02 x 10^23 atoms, which is the Avogadro's number.

Learn more about Atoms:

https://brainly.com/question/13654549

#SPJ4

Option C: Neutron is the subatomic particles that could be changed without changing the identity of the atom.

The number of protons in an atom is indicated by the atomic number. As a result, when the amount of protons changes, the atomic number also changes, changing the element's identity. An element's atomic mass changes when its neutron count is altered, but its identity is preserved. An element's charge changes as its electrons are lost or acquired, but its identity is unaffected. Thus, option C is the correct choice.

Protons, neutrons, and electrons are the three subatomic particles that make up an atom. Neutrons are neutrally charged particles, whereas protons are positively charged. The opposite of this is true of electrons, which have a negative charge. Protons and neutrons are found in the nucleus of an atom. An element's atomic number allows it to be recognised from other elements.

To know more about subatomic particles, refer to the following link:

https://brainly.com/question/18490374

#SPJ4

Complete question is:

In order to change the mass number of a given atom, which of the subatomic particles below could we change the number of without changing the identity (element) of the atom

a. electron

b. proton

c. Neutron

Some areas of earth is concentrated with minerals because, some areas of earth have past or current volcanic activity. Hence, option A is correct.

Minerals are naturally occurring inorganic compound with a definite composition and crystalline structure. For example, calcium carbonate, iron oxide etc. are mineral deposits.

Aluminum, diamonds, gold, nickel, lead, zinc, and copper minerals are produced or hosted by volcanoes directly or indirectly. The majority of these materials are used regularly by humans, and throughout the course of our lifetimes, we use significant amounts of certain of these minerals.

Many of the most significant metals that are mined on Earth had their beginnings in volcanic settings, either directly or indirectly. For instance, a volcanic rock may never reach the surface of the earth and will thus cool slowly in plutonic conditions.

Find more on minerals :

https://brainly.com/question/18078524

#SPJ1

The group 1 has a higher efficiency because group 1 has a higher output power.

Efficiency in chemistry is a comparison of the energy input and output in a specific system. Its definition is given by the equation and is expressed as the proportion of output to input energy: The representation of energy in the form of heat or power using this equation is quite common.

Efficiency is a function of input and output. Including waste and spoilage, output is the total amount of productive work completed (or work output). To create a percentage, efficiency is simply multiplied by 100.

To know more about power visit:

https://brainly.com/question/287674

#SPJ4

A million (1.0 ×10^6) vanadium atoms are present in 1.510 ×10^13 g of vanadium(v) oxide (v2o5).

Vanadium atom count: 1,000 to 10^^9 atoms

Step 2: Determine the V2O5 molecules with 1.000× 10^9 V atoms.

V2O5 molecules contain 2 V atoms each.

0.5000× 10^9 molecule V2O5 = 1.000 109 atom V (1 molecule V2O5/2 atom V)

Step 3: Determine the number of moles that equate to 0.5000× 10^9 molecules of V2O5.

We shall utilize Avogadro's number: 6.022 x 10^23 molecules of V2O5 make up 1 mole of the substance.

1 mol/6.022 10^23 molecules divided by 0.5000 109 molecules equals 8.303 10^16 molecules.

Step 4: Determine the mass equal to 8.303 1016 moles of V2O5.

V2O5 has a molar mass of 181.88 g/mol.

8.303 × 10⁻¹⁶ mol

For more information on mass of vanadium (V) oxide kindly visit to

https://brainly.com/question/20491138

#SPJ4

The pressure of the gas can be determined using ideal gas equation. The pressure of neon in the tank is 9.7 atm.

Ideal gas equations states the relation between volume, pressure, temperature and number of moles of gas as written below:

PV = nRT.

Where R is the universal gas constant equal to 0.082 L atm/K mol.

Given the volume of the tank  V = 10 L

number of moles n = 4 moles

temperature  = 22 ° C = 295 k

Then pressure P = nRT/V.

Pressure of neon gas = 4 moles × 295 K× 0.082 L atm/K mol /(10 L)

P = 9.7 atm.

Therefore, the pressure of the neon gas in the tank is 9.7 atm.

Find more on ideal gases:

https://brainly.com/question/30247106

#SPJ1

NaCl is an ionic compound, as stated in the second sentence on each of the substances.

Intermolecular forces operate between molecules. In contrast, intramolecular pressures are produced by molecules themselves. Intermolecular forces are less powerful than intramolecular forces. Intermolecular forces include the Interatomic force, particle contact, ion-dipole involvement, and interactions by van der Waals to name a few.

The two primary categories of intermolecular interactions are attracting forces as well as repulsive forces. Electrostatic forces are principally responsible for the attraction. The connection between four or more material elements, nevertheless, could also be caused by other factors.

To know more about Intermolecular force visit:

https://brainly.com/question/12243368

#SPJ4

Answer:

Mg + CuO2 = MgO + Cu+

Zn + MgO= ZnO + Mg

Zn + Cuso4 = ZnS + SO2 + Cu

what are the conditions for reaction like are they cocentrated?

Classification of given amino acids are done according to question.

Part A: Leucine: Neutral nonpolar

Asparagine: Neutral polar

Glutamine: Neutral Polar

Alanine: Neutral Nonpolar

Arginine: Basic

Part B:

Methionine: neutral nonpolar

Proline: Neutral Nonpolar

Serine: Neutral polar

Lysine: Basic

Phenylalanine: neutral nonpolar

Unlike non-essential amino acids, your body cannot make BCAAs, so they are regarded as essential. As a result, it is imperative to include them in your diet. Leucine, isoleucine, and valine make up the trio of BCAAs. They are all thought to be necessary for the human body and all have branched molecular structures.

More than one -COO⁻ group can be found in the structures of basic amino acids, while more than one NH₃⁺ group can be found in the structures of acidic amino acids. An amino acid becomes polar when it contains polar side chains like -OH or amide.

To know more about amino acids visit:

https://brainly.com/question/28474317

#SPJ4

Simply compare the options' masses to determine which has the highest mass as each has only one mole. The most abundant element is uranium, which has roughly 238 amu.

A chemical compound's mass M is equal to its amount of material, expressed in moles, multiplied by its mass. Calculators for molar mass, molecular weight, and elemental makeup can be found online. One mole of sodium atoms contains around 23 grams or 1 Na atom, which has an estimated mass of 23 u. The approximate mass of one oxygen atom is 16 u, or around 16 g, for one mole of oxygen atoms. One mol of chlorine atoms has an approximate mass of 35.453 grams, or 35.453 u for one chlorine atom. Finally one uranium contains 238u. Compared with other molecules uranium has the greatest mass.

To learn more about uranium click here https://brainly.com/question/24285205

#SPJ4

Sort the atoms in order of proximity to one another. The atom with the lowest group number should be positioned in the middle since it has the lowest electronegativity. If the group number of two atoms is the same

Of Lewis structures, the valence electrons of the atoms in a molecule are shown. They are also known as electron dot structures or Lewis dot structures.

The valence electrons of atoms and molecules are easier to visualize using these Lewis symbols and structures. An extremely simplified representation of a molecule's valence shell electrons is provided by a Lewis Structure. It serves to illustrate how certain atoms are surrounded by electrons in a molecule.

To know more about Lewis structure visit:

https://brainly.com/question/4144781

#SPJ4

Answer:

infinitely solutions

Explanation:

if it's the same thing on both sides its infinitely solutions

Answer:4.7374*10^23 atoms

Explanation:

Number of atoms in 144.6g tungsten,

Moles=Given mass/molecular mass

n=144.6/183.84

n=0.7865

Number of atoms=n*Na

Number of atoms=0.7865*6.023*10^23

Number of atoms=4.7374*10^23

Answer:

Explanation:

15.0 mL of vinegar is equivalent to 15.0 g of vinegar, since the density of vinegar is 1.0 g/mL. Vinegar is composed of mostly acetic acid (CH3COOH) and water. The density of acetic acid is 1.05 g/mL, so 15.0 mL of vinegar is equivalent to approximately 14.3 g of acetic acid.

The balanced equation for the reaction between sodium bicarbonate (baking soda) and acetic acid is:

NaHCO3 + CH3COOH → NaCH3COO + H2O + CO2

For every mole of acetic acid, we need one mole of sodium bicarbonate. We can use the molar mass of acetic acid (60.05 g/mol) and sodium bicarbonate (84.01 g/mol) to calculate the amount of baking soda needed.

14.3 g of acetic acid x (1 mol/60.05 g) = 0.238 mol acetic acid

0.238 mol acetic acid x (84.01 g/mol) = 19.9 g baking soda

Therefore, 19.9 g of baking soda is needed to react with the 15.0 g of acetic acid in 15.0 mL of vinegar.

The reactants are in the aqueous phase, while the product is in the solid phase and water is in the liquid phase.

Aqueous phase is a term used to describe a solution in which water is the solvent. This type of solution is commonly used in chemistry, as water is an excellent solvent for many different types of compounds. In an aqueous solution, the molecules of the solute are dissolved into the water molecules and are then evenly distributed throughout the solution. This process is driven by the strong intermolecular forces between water molecules, which allows them to attract and form strong bonds with other molecules.

Mo^3+(aq) + 3e⁻ → Mo(s)
The balanced redox reaction takes place in an acidic solution, so H+ ions are also consumed in the process. Therefore, the balanced equation is:
Mo^3+(aq) + 3H+(aq) + 3e⁻ → Mo(s) + 3H2O(l)
The reactants are in the aqueous phase, while the product is in the solid phase and water is in the liquid phase.

To learn more about aqueous phase
https://brainly.com/question/13184491
#SPJ4

8.0 grams are created when 2.5 grams pure hydrogen gas and 7.0 gram of carbon monoxide react.

Colorless and odorless, monoxide (CO) seems to be a gas. It is emitted by a number of combustion, including as cars, electric utilities, wildfires, and incinerators, and it is caused by the fuel burning of carbon-containing fuels like oil and gas, gasoline, etc wood.

A substance called carbon cyanide is created when shale gas or other carbon-containing materials are burned partially. This includes production emissions, fires, malfunctioning heaters, and exhaust.

Gram to mole conversion,

Grams * (1 mol)/ grams "

Moles of CO,

= 7.0 g*(1 mol)/(28.01 g)

= 0.249 mol CO

Moles of H2,

= 2.5 g*(1 mol)/(2.016 g)

= 1.240 mol O2

Mass of methanol,

0.249 mol CO * (1 mol CH3OH) /mol CO*

= 1mol CH3OH /32.04gCHOOH

=0.0077 mol CH3OH

= 0.008 molCH3OH

= 8.0 grams

To know more about carbon monoxide visit:

https://brainly.com/question/2484413

#SPJ4

Answer:

8.0

Explanation:

I took the test

Al2O3 does not use Greek prefixes since it is an ionic compound, while N2O3 does use Greek prefixes since it is a molecular compound.

A molecular compound is a chemical compound consisting of two or more atoms held together by covalent bonds. Covalent bonds are formed when atoms share one or more of their electrons with another atom in order to complete their outer electron shell.

The main difference between Al2O3 (aluminum oxide) and N2O3 (dinitrogen trioxide) is that Al2O3 is an ionic compound (made up of charged ions) and N2O3 is a molecular compound (made up of covalently bonded molecules). Therefore, the naming conventions for these two types of compounds are different. For ionic compounds, the name includes the names of the cation and anion (aluminum and oxide, respectively) and their charges (Al2+ and O3-). For molecular compounds, the prefixes are taken from the Greek language to indicate the number of atoms of each element in the molecule (di- for two nitrogen atoms and tri- for three oxygen atoms). Therefore, Al2O3 does not use Greek prefixes since it is an ionic compound, while N2O3 does use Greek prefixes since it is a molecular compound.

To learn more about molecular compound
https://brainly.com/question/2671865
#SPJ4

mg(hso3)2 breaks down together into solid x, water vapor, then so2 gas. This figure is reasonably near to an established rate of 36 g for verify the outcome when 186 g o mg(hso3)2 completely decomposes & leaves only 40 g pure solid.

When one reactant splits to two or more products, it is called a decomposition reaction. The general equation AB A + B can be used to describe this. Hydrogen peroxide breaking down into water and oxygen and water breaking down into hydrogen and oxygen are both examples of decomposition reactions.

Decompose has a number of frequent synonyms, including decay, putrefy, rot, & ruin. All of these terms refer to "to experience destructive disintegration," but the word "decompose" emphasizes a breakdown by chemical change and, when used in reference to biological stuff, a corruption

To know more about decompose visit:

https://brainly.com/question/28896356

#SPJ4

Answer:

44.99

⋅

g

18.01

⋅

g

⋅

m

o

l

−

1

×

N

A

, where

N

A

=

Avogadro's number

6.022

×

10

23

⋅

m

o

l

−

1

.

Explanation:

The one would from a precipitate when mixed with the aqueous solution of Ba(NO₃)₂ is Na₂SO₄.

The  Na₂SO₄ with the Ba(NO₃)₂ would form the precipitate when mixed in the aqueous solution. The reaction is given as :

Ba(NO₃)₂(aq)  +  Na₂SO₄(aq)   ---->    BaSO₄(s)  +  2NaNO₃(aq)

The BaSO₄ is the  insoluble specie form in this reaction. The ionic equation is written as follows :

Ba²⁺  +  2NO₃⁻  +  2Na⁺  +  SO₄²⁻  ---->   BaSO₄  +  2Na⁺  +   NO₃⁻

The BaSO₄ is insoluble and form as a precipitate . It does not froms the ions in the solid state.

Thus , the correct option is A)  Na₂SO₄.

To learn more about precipitate here

https://brainly.com/question/30245583

#SPJ4