Calculate the molecular mass of the element

They give:H=1,AI=27,S=32,0=16,Cu=64,P=31,Mg=24,N=14,Na=23

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

Metals have tendency to loose electrons in order to get noble gas configuration, therefore they loose electrons to form Cations (positively charged ions)

for example ~ Sodium forms Na+

And

Non - metals have tendency to gain electrons in order to attain noble gas configuration , hence they gain electron from somewhere and bears a negative charge forming Anion.

for example ~ Chlorine forms Cl-

Answer:

Q = mcT ...you can either substitute the molar heat capacity of water in the place of c or the specific heat capacity of water.

Explanation:

Considering the IUPAC name, the common name for N₂O is nitrous oxide

IUPAC (International Union of  Pure and Applied Chemistry), is the recognized authority in the development of standards for the naming of  chemical compounds, through their Interdivisional Commitee on Nomenclature and Symbols.

The  IUPAC name to N₂O is nitrous oxide. Nitrous oxide is commonly known as the laughing gas is a colorless gas with a pleasant, sweetish odor and taste that, when breathed, causes placidity to pain.

Learn more:

Answer:

on e2020 the first one is dinitrogen monoxide second one is nitrous oxide

Explanation:

Answer:

mark me brainlest

Explanation:

Electronegativity values generally increase from left to right across the periodic table. Electronegativities generally decrease from top to bottom of a group. The highest electronegativity value is for fluorine.

Answer:

       "Electronegativity increases as you move from left to right across a period because the number of charges on the nucleus increases." (sstudy30 on Quizlet)

Explanation:

    It explains itself haha!

Have a nice day!

    I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)

- Heather

Answer:

The forms of energy are:

These are the six forms hope you can write short notes on them.

Answer:

The most accurate and percise player was Josh

C

R. F. M (Relative Formula Mass) of C=12

12g of C=1 mole

1.39g of C=(1*1.39)/12

=0.1158 moles

The number of moles of XeF4 that can be created would be 0.5 moles.

From the equation of the reactiobn:

                Xe (g) 2 F₂ (g) ---> XeF₄ (g)

The mole ratio of Xe to F2 is 1:2. Hence, in the presence of 1 mole Xe and 1 mole F2, F2 would be limiting the reaction.

This means that the amount of F2 would determine the amount of XeF4 that would be produced from the reaction.

The mole ratio of F2 to XeF4 according to the equation is 2:1. This means that for every 1 mole of F2 introduced into the reaction, 0.5 moles of XeF4 will be produced.

In this case, 1 mole of F2 is introduced. Thus, the mole of XeF4 that would be produced would be:

                       1/2 = 0.5 moles.

More on stoichiometric calculations can be found here: https://brainly.com/question/8062886?referrer=searchResults

Answer:

A. Core

Explanation:

The collisions which occur between the hydrogen atoms starts to heat the gas in the cloud. Once the temperature reaches 15,000,000 degrees Celsius, nuclear fusion takes place in the center, or core, of the cloud. The tremendous heat given off by the nuclear fusion process causes the gas to glow creating a protostar.

In a star, nuclear fusion which is a type of  nuclear reaction occurs in the core.

There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.

In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.

In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.

Learn more about nuclear reactions,here:

https://brainly.com/question/12786977

#SPJ5

Answer:

The highlighted words in the explanation.

Explanation:

A clue comes by considering the noble gas elements, the rightmost column of the periodic table. These elements—helium, neon, argon, krypton, xenon, and radon—do not form compounds very easily, which suggests that they are especially stable as lone atoms. What else do the noble gas elements have in common?

Answer:

5540

Explanation:

Answer:

5,440

Explanation:

10 deciseconds = 1 seconds

554 seconds = 5,440 seconds

Answer:

see below

Explanation:

1. Heat energy is added to the substance, weakening the electrical attraction between molecules.

2. Both the melting point and boiling point are lower.

3. dipole

4. Water and ethanol have different molecular structures.

5. The lone pairs of electrons in the oxygen atom causes the molecule to be bent; the oxygen atom has a partial negative charge, while the hydrogen atoms have partial positive charges.

[quizlet: captncrun]

Heat is a form factor that changes the solid from light to light to gaseous mediums. The phases take place in a cyclic manner.

Hence the correct option is C.

Learn more about the phase change from solid to liquid occur in a substance

brainly.com/question/25664350.

Answer:

96mg

Explanation:

Since the half-life of Palladium-100 is 4 days and the sample has been reduced after 16 days, that means the sample has undergone four half-lives. To find the intial mass, just work backwards:

As you see, I've worked backwards from the four half-lives. So the initial mass after 16 days is 96 mg.

Answer:

the difference is  the presence of a carbon atom

Explanation:

Answer:

A +1 Ion of Lithium

Explanation:

Lithium has the atomic number of 3, therefore it has 3 protons

An electron has a negative charge, so losing an electron gives an atom a positive charge.

Answer:

Positive 1 ion of lithium

Explanation:

hope this helps!

Answer:

True

ANTI MEANS AGAINST

Explanation:

Answer:

1.) Tin oxide + Carbon → Tin + Carbon monoxide.

2.) Lead oxide + Carbon → Lead + Carbon monoxide.

These equations show that the metals are being extracted by their oxides by heating with carbon. This is because the metals (Tin and Lead) are less reactive than carbon. Remember, extraction methods of metals are determined by their reactivity. Since the elements tin and lead are less reactive than carbon, the extraction process of heating with carbon is needed.  Remember that when a metal heats with carbon, the carbon displaces the metal from the compound and removes the oxygen from the oxide. Leaving you with the metal and carbon monoxide.

Answer:

Group 2A (or IIA) of the periodic table are the alkaline earth metals:  beryllium (Be), magnesium (Mg), calcium (Ca), strontium (Sr), barium (Ba), and radium (Ra).  They are harder and less reactive than the alkali metals of Group 1A.  The name comes from the fact that the oxides of these metals produced basic solutions when dissolved in water, and they remained solids at the temperatures available to the ancient alchemists.  Like the Group 1A elements, the alkaline earth metals are too reactive to be found in nature in their elemental form.

The alkaline earth metals have two valence electrons in their highest-energy orbitals (ns2). They are smaller than the alkali metals of the same period, and therefore have higher ionization energies.  In most cases, the alkaline earth metals are ionized to form a 2+ charge.

The alkaline earth metals have much higher melting points than the alkali metals: beryllium melts at 1287ºC, magnesium at 649ºC, calcium at 839ºC, strontium at 768ºC, barium at 727ºC, and radium at 700ºC.  They are harder metals than the Group 1A elements, but are soft and lightweight compared to many of the transition metals.

Salts of the Group 2A metals are less soluble in water than those of Group 1A because of the higher charge densities on the 2+ cations; nevertheless, many Group 2A salts are at least moderately soluble.   Some Group 2A salts bond strongly to water molecules, and crystallize as hydrates; among these are Epsom salt, MgSO4·7H2O, and gypsum, CaSO4·2H2O.

Explanation:

Answer:

H2, N2, O2, F2, Cl2, Br2, I2

Explanation:

The 7 diatomic elements in the periodic table are Hydrogen, Nitrogen, Oxygen, Fluorine, Chlorine, Bromine and Iodine.

Answer:

This happens because a metal is less reactive than carbon and it can be extracted from its oxides by heating with carbon. The carbon displaces metal from the compound and removes the oxygen from the oxide.

Answer:

Explanation:

Record the letters in your triangle from left to right A MAGNESIUM CHLORATE B MAGNESIUM SULFATE C MAGNESIUM HYPOCHLORIDE D MAGANESE PERCHLORATE E MN C10 F MGMNO G MANGANESE CHLORIDE

Answer:

Paracetamol

Formula

C8H9NO2

Answer:

B

Explanation:

Answer:

The mass of an atom based on the mass of an atom of carbon-12

Explanation:

Answer:

iconic compound

Explanation:

Maximum number of electrons in nth energy level

[tex]\\ \sf\longmapsto 2n^2[/tex]

Now

Max electrons

[tex]\\ \sf\longmapsto 2(1)^2[/tex]

[tex]\\ \sf\longmapsto 2e^-[/tex]

Answer:

The answer is B.

Explanation:

the force multiplied by the time objects are in contact

Answer:

thank you for the points

Answer:

Modern recorders are most commonly pitched at A=440 Hz, but among serious amateurs and professionals, other pitch standards are often found. For the performance of baroque music, A=415 Hz is the de facto standard, while pre-Baroque music is often performed at A=440 Hz or A=466 Hz.

Explanation:

Answer:

31 miles lol

Explanation:

30 mins is half of an hour and they went 62 miles per hour so divide 62 by 2

Answer:

It depends on the atom, or more specifically, on the size of its nucleus. There is a competition between the electrical repulsion of the protons (that drives the nucleus apart) and the attraction of the protons and neutrons (due to chromodynamics). For nuclei above a certain size, the repulsion tends to win

Explanation:

hope this helps