Calculate the polar radius of gyration of the shaded area about its centroid C. Assume t = 130 mm, a = 465 mm, b = 565 mm ko = ... mm

The plastic insert in the inlet of a 20-gallon horizontal tank should be left in place during installation.

The plastic insert is there to prevent backflow into the tank and should not be removed. Removing the plastic insert can also create a safety hazard as it can cause the tank to overfill or become pressurized, potentially leading to leaks or other problems. If the plastic insert has become damaged or is not functioning properly, it should be replaced with a new insert before the tank is installed.

Learn more about plastic insert:

https://brainly.com/question/12626467

#SPJ4

Vacuum into a recovery/recycling machine, empty disposable R-134a refrigerant containers should be disposed of.

An area devoid of the matter is called a vacuum. The adjective vacuum, which means "empty" or "void," is the source of the word. A region with a gaseous pressure significantly below atmospheric pressure might be thought of as an approximate representation of such a vacuum. The term "partial vacuum" is used to describe an imperfect vacuum, such as one that might exist in a laboratory or in space, and is frequently used when physicists discuss the ideal test outcomes that would take place in a perfect vacuum, which they sometimes simply refer to as "vacuum" or free space. Contrarily, any area where the pressure is significantly lower than atmospheric pressure is referred to as a vacuum in engineering and applied physics. A space that envelops an object is referred to as being in vacuo in Latin.

Learn more about vacuum here:

https://brainly.com/question/4592424

#SPJ4

A supplementary grounding electrode is required when the only grounding electrode available is a metal underground water pipe.

A grounding electrode basically establishes a direct connection to the earth or ground by being conductive. A grounding electrode's direct contact with the ground is what matters. In spite of the fact that a structure contains many conductive items, not all of them directly connect to ground. The grounding electrode system here starts to take shape.

If any of the listed items are present, they must be used to create the grounding electrode system, according to the NEC, which contains a list of items that are allowed to be used as grounding electrodes. As permitted grounding electrodes, there are eight items listed in 250.52.

Learn more about grounding electrode

https://brainly.com/question/14612121

#SPJ4

When the Titanic struck the iceberg, the hull plates split open and continued to crack as the ship was flooded. Brittle failure of the rivets used to fasten the hull plates to the ship's main structure was also caused by low water temperatures and high impact loading.

The RMS Titanic was a British passenger liner operated by the White Star Line that sank in the North Atlantic Ocean on 15 April 1912 after colliding with an iceberg during her maiden voyage from Southampton, England, to New York City, USA.

More than 1,500 people died, making it the deadliest sinking of a single ship to that point. It is still the deadliest ocean liner or cruise ship sinking in peacetime.

The disaster drew widespread public attention, laid the groundwork for the disaster film genre, and inspired numerous artistic works. The RMS Titanic was the largest ship in the world when she entered service, and she was the second of three Olympic-class ocean liners operated by the White Star Line.

Learn more about Titanic

https://brainly.com/question/8159374

#SPJ4

Usually, electric heaters are used. Compared to fossil fuel heating equipment, it is more affordable to buy but more expensive to run.

Any type of biologically derived hydrocarbon-containing fuel that is found in the Earth's crust and can be used as an energy source is referred to as a fossil fuel.

Oil shales, bitumen, tar sands, and heavy oils are examples of fossil fuels along with coal, petroleum, natural gas, and petroleum. All of them include carbon and were created by geologic processes acting on the remains of organic matter produced by photosynthesis, a process that started in the Archean Eon (4.0 billion to 2.5 billion years ago). Before the Devonian Period (419.2 to 358.9 million years ago), the majority of carbonaceous material came from bacteria and algae, but the majority of carbonaceous material that formed during and after that time came from plants.

Learn more about fossil fuel here:

https://brainly.com/question/29608326

#SPJ4

The correct answer is fiber You have been asked to install a network cable inside a conduit that will be placed underground and used to connect two buildings that are located about 1 KM apart.

Fiber optic cables come in single-mode and multimode varieties. Due to its diverse optical characteristics in the core, multimode optical fibre, also known as OFC, is able to transmit many light beams (modes) at once. The core size of single-mode fibre is substantially smaller (9 microns). There are two "modes" of fibre optic cable: multimode and singlemode. Mode describes the number of pulses or the single pulse of light. There are two core sizes for multimode fibre (MMF): 50 m and 62.5 m. Fiber-optic access options for residential deployments are part of FTTH. Fibers are directly linked to specific residences or multi-tenant buildings in FTTH networks.

To learn more about fiber click the link below:

brainly.com/question/18271318

#SPJ4

Here's an example of how you might open a PrintWriter and write out the contents of the plants array into a text file named plants.txt in Java:

String[] plants = {"Rose", "Tulip", "Lily", "Sunflower"};

PrintWriter writer = new PrintWriter("plants.txt", "UTF-8");

for (String plant : plants) {

   writer.println(plant);

}

writer.close();

Here's an example of how you might open a PrintWriter and write out the contents of the plants array into a text file named plants.txt in Python:

plants = ["Rose", "Tulip", "Lily", "Sunflower"]

with open("plants.txt", "w") as file:

   for plant in plants:

       file.write(plant + "\n")

Please note that in Python, the "w" mode of the open function will truncate the file if it already exists and create a new one if it does not.

You can also use the append mode to add the new data to the existing file.

with open("plants.txt", "a") as file:

   for plant in plants:

       file.write(plant + "\n")

You can also use the writelines method to write out the contents of the plants array into the text file.

with open("plants.txt", "w") as file:

   file.writelines("\n".join(plants))

Please note that the above code examples will create the text file in the same directory where the code is running. If you want to save the file in a specific directory, you will have to provide the full path of the directory in the filename.

True, the planning team should, if possible, build on previous analyses, such as Hazard Identification and Risk Assessments created by States, significant urban regions, and other governmental bodies.

A continuous urban area (UA) is one that has at least 50,000 residents. It consists of one or more locations—the centre location(s)—and the nearby, densely populated surrounding area, or urban fringe, which is made up of other locations and nonplace territory. All people, homes, and land that are not located in an urban area are referred to as "rural." A census block that satisfies the minimum housing unit density and/or population density standards will constitute an urban area for the 2020 Census. Cities are described with the word urban. There are many people who live and work in cities. Cities are heavily populated commercial centres where leading a fast-paced lifestyle is frequently the norm. Urban areas include places like Atlanta and New York City.

Learn more about urban regions here

https://brainly.com/question/26672924

#SPJ4

A project's goals are established by a number of teams that have been involved in the project. the many project teams, including the engineering, procurement, and project controls teams.

Several teams will be involved in a project, so each team will contribute in its own unique way. The functional team is one form of company in a project. Teams are a specific kind of team that carry out particular organizational duties and include members from various vertical levels within the hierarchy. The engineering team, the procurement team, configure, purchasing, people, and accounting are a few examples of functional teams.

A person who can function normally is oneengineers is an example of a a. task force. b. cross-functional team. c. virtual organization. d. structured organization. e. community of practice.

To know more about functional visit:

https://brainly.com/question/29124373

#SPJ4

It is more efficient to pattern the sketch before you extrude. This is because when a sketch is patterned before it is extruded, the pattern is created based on the original sketch and the software automatically updates the final feature. If the pattern is applied after the extrusion, the software would have to pattern each individual feature, which would take more time and potentially lead to errors.

2. Two objects that could not be modeled efficiently using a straight extrusion but would more efficiently be modeled using a Loft feature are:

By patterning the sketch before extruding, the software can quickly and easily apply the pattern to the final feature.

Objects that could be modeled using a tapered extrusion are:

Therefore, In both cases, the tapered extrusion feature allows for easy creation of tapered shapes, which would be more difficult to model using other features such as straight extrusions or lofts.

Learn more about pattern from

https://brainly.com/question/28580633

#SPJ1

The resistance for a perfect circuit will be calculated as R= I/V = 6/2 = 2. A variable power supply is one that has several controls that allow the user to quickly change the output voltage and, occasionally, current.

The most common tool for adjustment is a potentiometer, although other tools include analog control voltage, digital input, autotransformer, etc. The measured voltage is the total of the voltages across the ammeter and the resistance, albeit, with a non-ideal ammeter, the ammeter's resistance is not zero. Otherwise known as V>V R, measured voltage (V) is greater than the voltage across the resistor (V R).

As a result, the measured resistance (2) is higher than the real resistance.

Learn more about voltage here-

https://brainly.com/question/27851005

#SPJ4

To determine if you can safely cross a ravine with two I-beams, you will need to calculate the maximum allowable span of the I-beams. This can be done by first determining the dead load and live load on each beam, and then using a span-to-depth ratio to calculate the maximum allowable span.

The dead load is the weight of the beams themselves and any permanent loads that are attached to the beams, such as a deck or guardrail. The live load is the weight of any temporary loads, such as people or materials, that will be placed on the beams. Once the dead load and live load are known, the maximum allowable span can be calculated using a span-to-depth ratio.

This ratio is typically determined by the type of I-beam being used, the material of the beam, and the expected environmental conditions. For example, if the I-beam being used is made of steel and is expected to be subjected to wind loads, the span-to-depth ratio might be 6 to 1. This means that for every 6 feet of span, the beam must be at least 1 foot deep.

Learn more about two i-beams:

https://brainly.com/question/24706803

#SPJ4

Explanation:

which of the following statements about s orbitals in INCORRCT

Answer:

R4 is 1.5 ohm

Explanation:

.if there is no current flowing through R5, there must be no potential difference between a and b.

As such, the ratio of pitentual divider R1/R2 is equal to R4/R3.

Redundancy for a broken link is provided via mesh network topologies. Network topology can be used to define or describe a variety of telecommunication networks

The topology of a communication network describes how its elements are set up. Network topology can be used to define or describe a variety of telecommunication networks, including industrial fieldbuses, computer networks, and command and control radio networks. Studying network topology allows one to recognize the eight basic topologies that include point-to-point, bus, star, ring or circular, mesh, tree, hybrid, and daisy chain. The star, mesh, tree, ring, point-to-point, circular, hybrid, and bus topologies are a few examples of physical network topologies. These networks are made up of various configurations of nodes and linkages. Studying network topology allows one to recognize the eight basic topologies which include point-to-point, bus, star, ring or circular, mesh, tree, hybrid, and daisy chain.

Learn more about Network topology here:

https://brainly.com/question/29743051

#SPJ4

Cast-in-place concrete is the type of roofing material develops its design strength when it is placed into forms and then hardens at the building site.

Roofing material is an outer layer on our roof that helps the building from rains and thunderstorms etc. There are many types of roofing materials on the market. You can choose any material of your choice like metal shingles, wood shingles and clay tiles etc. Cast-in-place concrete is poured onsite in the finished concrete position. This differs from precast concrete where the slabs are built somewhere else and when they get ready, they are shifted the site and assembled as needed.

Considering a more durable or modern roofing material is recommended. Appearance, durability, price of the roofing material, and structural issues should be considered to select the right type of roofing material.

For further information regarding roofing material, click the link below:

brainly.com/question/29735299

#SPJ4

Technician A is the appropriate response based on the information provided in the question.

the quantity or size of something as determined by measurement. use equal amounts of the ingredients.: a yardstick, cup, or other measuring device.: a measurement unit. A foot is used to measure length.

The measurement that just employs one kind of unit is considered to be simple. minutes and hours. For instance, to convert 2 hours, 23 minutes, and 12 seconds to seconds, we must first get all 3 parameters in seconds using the conversion factors, then add them.

To know more about measure visit:

https://brainly.com/question/28334506

#SPJ4

The equipment aspect of the corporate environment is exemplified by tools like phones, fax machines, and computers.

Equipment includes items like computers, vehicles, and processing equipment. They are tangible because they have a physical form, as opposed to intangible assets, which don't (such patents, trademarks, or copyrights), which are the things required for a specific activity or purpose. When we say "the set of goods you require for a certain function," we mean "the uncountable noun equipment," such as tools or clothing: New sleeping bags and a small refrigerator are among the camping supplies we've purchased. They are the most fundamental methods for employing leverage (or mechanical advantage) to increase force that are currently understood. Simple machines include the wheel and axle, inclined plane, lever, wedge, pulley, and screw basic machines

Learn more about Equipment here

https://brainly.com/question/22097711

#SPJ4

Shear stress values and the velocity profile are v=0.4m/s,
t=45 N/m^ 2

Explanation:
                   

A) Velocity profile=0.6m/s, and 0.2m/s        
relative velocity=0.6m/s-0.2m/s

v=0.4m/s
                                   
∵ thickness=4 mm
t=4x10^ -3m              
           
B) Shear stress t=R v/t
=0.45x0.4/4x10^-3
t=45 N/m^ 2                          

Shear velocity, also known as friction velocity, is a way to express a shear stress in velocity units. Comparing actual speeds, like the flow in a stream, to ones that reflect shear between layers of flow is a useful technique in fluid mechanics.
Due to its close connection to earthquakes and the downslope movement of earth materials, the resulting shear has a significant impact on nature. Either solids or liquids can experience shear stress.
Using equation, one can determine the shear velocity.

U*=  √r/p in the general case.  
                 

INCOMPLETE QUESTION:

The flat belts are moving at the speeds shown. Plot both the velocity profile within the oil film and the  shear stress  distribution. The pressures at A and B are atmospheric. Take u^0=0.45N.s/m2 and P^0=920KG/M3  

To learn more about velocity
https://brainly.com/question/18084516
#SPJ4  
                         

.

The correct response is D. temperature on–temperature off. A bimetal fan/limit switch cycles the blower using temperature on–temperature off.

To express in numerical terms how hot or cold something is, the idea of temperature is used. Using a thermometer, one can gauge temperature. Different temperature scales, which historically relied on various reference points and thermometric materials for definition, are used to calibrate thermometers. The most popular scales are the Kelvin scale (K), which is mostly used for scientific reasons, the Fahrenheit scale (°F), and the Celsius scale, with the unit symbol °C (formerly known as centigrade). One of the International System of Units' seven base units is the kelvin (SI). The lowest temperature on the thermodynamic scale is absolute zero, or 0 kelvin, or 273.15 degrees Celsius. The third law of thermodynamics acknowledges that it can be experimentally approached extremely closely but never actually reached. At that temperature, it would be difficult to extract energy from a body in the form of heat. All branches of natural science, including physics, chemistry, Earth science, astronomy, biology, ecology, material science, metallurgy, mechanical engineering, and geography, as well as the majority of facets of daily living, depend on temperature.

Learn more about temperature here

https://brainly.com/question/25677592

#SPJ4

The capacity of a pressure to rotate an entity is known as the period of force, or torque. It varies depending on the amount of force used and how far the force is applied from the object's axis of rotation.

A vector is a quantity or phenomenon with independent properties for both size and direction. The mathematical or mathematical representation of a quantity is another use of the term. Speed, momentum, force, electromagnetic fields, and weight are a few examples of vectors in nature.

Latin gives the word vector the meaning of "a carrier." Astronomers originally used it to describe the movement of planets in the 18th century.

To know more about vector visit:

https://brainly.com/question/21157328

#SPJ4

The correct answer is owner. The classification of an area as being hazardous with regard to the installation of lighting fixtures is the responsibility of the insurance company, authority having jurisdiction.

In the International System of Units, the lux (symbol: lx) is the unit of illuminance, or light flux per unit area (SI). In terms of lumens per square metre, it is one. This is used in photometry to quantify the amount of light that strikes or penetrates a surface as seen by the human eye. Calculating illumination determines how much light is produced overall by a source. Lumens per square metre, or lux, are used to measure this luminous flux.The entity, position, or person with legal authority to uphold a standard's standards is said to have jurisdiction. The majority of provinces and territories have selected an AHJ as the body in charge of ICS inside their territorial jurisdiction.

To learn more about jurisdiction click the link below:

brainly.com/question/12448353

#SPJ4

Answer:

No, you cannot add the ceiling fan to the circuit.

Explanation:

120V/60W=0.5A (V/W=A)

0.5A*4=2A (you have 4 60W lamps)

2A+1.6A=3.6A

3.6Ax0.125=0.45A (continuous load appliances must have amperage rated at 125% according to USA NFPA 70)

0.45A+3.6A=4.05A

4.05A+8.6A=12.65A

Assuming all devices on the circuit are ON, there would be a total current draw of 12.65A (after adding the ceiling fan). 80% of 15A is 12A.

Any tool that is powered by the user's hands as opposed to a motor is a hand tool.

Any tool that is powered by hand rather than a motor is referred to as a hand tool.

Wrenches, pliers, cutters, files, striking tools, struck or hammered tools, screwdrivers, vises, clamps, snips, hacksaws, drills, and knives are examples of different types of hand tools.

It should be noted that classifying hand tools according to its function is important because it will provide the user with enough knowledge to be able to use the hand tools.

Learn more about hand tools on:

https://brainly.com/question/18041186

#SPJ1

Complete question

Explain hand tools

Answer:

336 ways

Explanation:

Plotting the accessible energies for an electron in a material allows band theory to assist visualise the differences between a conductor, semiconductor, and an insulator.

It is essential for this course to understand how to read and sketch the energy band model, also known as the band diagram, which is used throughout the book to explain how electrons and holes respond to external factors like as light, heat, and/or voltage.

The knowledge amassed during the scientific quantum revolution contributed in certain ways to the development of band theory. Felix Bloch came up with the concept of using solids as examples for the quantum theory in 1928. Bands—extremely tightly spaced orbitals with minimally different energies—were discovered by Walter Heitler and Fritz London in 1927.

Plotting the accessible energies for an electron in a material allows band theory to assist visualise the differences between a conductor, semiconductor, and an insulator.

To learn more about energy band refer to:

https://brainly.com/question/29819769

#SPJ1

Answer:

Explanation:

Answer:

it gets more ductile as you apply heat

The feed overload protective device should have a size of 11.25A based on the information provided in the inquiry.

A circuit in electronics is a full circular channel via which electricity flows. A simple circuit entails a current source, wires, and a load. The term "circuit" can broadly be used to describe any ongoing path via which electrical, data, or a transmission might go.

Closed circuit, current in the circuit, short - circuits, main design, and parallel circuit are the main varieties of electric circuits. The movement of electrical charges or current has a conductive channel thanks to electric circuits.

To know more about  circuit visit:

https://brainly.com/question/29960212

#SPJ4

For a BJT to operate as an amplifier, the base-emitter junction must be forward biased and the base-collector junction must be reverse biased.

Forward biasing the base-emitter junction allows the BJT to conduct current and reverse biasing the base-collector junction allows it to act as an amplifier.

The base-collector junction must be reverse biased for a BJT to operate as an amplifier. Reverse biasing the base-collector junction allows the BJT to act as an amplifier by controlling the current flow between the collector and the emitter.

Learn more about base-collector junction:

https://brainly.com/question/10765323

#SPJ4

A cell's plasma membrane acts as a barrier that is selectively permeable, controlling the movement of molecules, ions, and other substances from the cell's exterior to its interior.

When someone is choosy, they carefully select their actions and purchases, for instance. Sales still take place, but purchasers are pickier now. Synonyms: specific, strict, picky, and judgmental Additional Synonyms for select.

If partial knowledge acknowledges that we must address a problem with incomplete facts, selective knowledge discusses the deliberate decision to reject, select, then accept based on need, desire, or expectation up until a story is revealed.

To know more about selective visit:

https://brainly.com/question/21080395

#SPJ4

Thunderbolt, A-HDMI, B-IEEE 1394, C-USB, E-VGA, F-DVI, G-RJ45, H-RJ11, I-Fiber, S/PDIF, and J-Audio Jack.

There are three distinct types of expansion slots shown in this image: PCI Express, PCI, and AGP. PCI Express: Also known as PCIe, PCI Express is the ideal sort of expansion slot to have in your computer. A USB port is used to connect a wired mouse to a contemporary computer. In light of this, a modern PC uses the USB port on its back to connect a mouse, making USB the right response. Signals for visual and audio can be sent via DisplayPort over the same connection.

To learn more about Thunderbolt click the link below:

brainly.com/question/28858886

#SPJ4