To calculate the standard enthalpy change for the reaction, we need to use the Hess's Law. Hess's Law states that the overall enthalpy change for a reaction is independent of the pathway taken. In other words, the sum of the enthalpy changes of the individual steps in a reaction is equal to the overall enthalpy change.
First, we need to balance the equation:
SiCl4(l) + 2H2O(l) → SiO2(s) + 4HCl(g)
Next, we need to calculate the enthalpy change for each step in the reaction.
1. SiCl4(l) → SiCl4(g) ΔH = +657.0 kJ/mol (since it is a vaporization)
2. H2O(l) → H2O(g) ΔH = +44.0 kJ/mol (since it is an evaporation)
3. HCl(aq) → HCl(g) ΔH = +74.9 kJ/mol (since it is a vaporization)
4. SiCl4(g) + 2H2O(g) → SiO2(s) + 4HCl(g) ΔH = ?
Using Hess's Law, we can add the enthalpy changes of the first three steps to find the enthalpy change for the fourth step:
ΔH = (+657.0 kJ/mol) + 2(+44.0 kJ/mol) + (+74.9 kJ/mol) = +819.9 kJ/mol
Finally, we can use the enthalpy change for the fourth step to calculate the overall enthalpy change for the reaction:
SiCl4(l) + 2H2O(l) → SiO2(s) + 4HCl(g)
ΔH = (-910.7 kJ/mol) - 4(-167.2 kJ/mol) - (+819.9 kJ/mol) = -54.3 kJ/mol
Therefore, the standard enthalpy change for the reaction is -54.3 kJ/mol.
TO KNOW MORE ABOUT standard enthalpy change CLICK THIS LINK -
brainly.com/question/29556033
#SPJ11
Based on the following data, what is the Br-Br bond energy?H2(g) + Br2(g) → HBr(g); ΔH = -36.44 kJ/mol rxnBond Bond Energy (kJ/mol)H-H 435H-Br 362a. 399 kJ/molb. 216 kJ/molc. -216 kJ/mold. -289 kJ/mole. 289 kJ/mol
To find the Br-Br bond energy, we need to use the bond energy values given in the table and apply Hess's law.
First, we need to write the balanced equation for the reaction:
H2(g) + Br2(g) → 2HBr(g)
Next, we can calculate the bond energies for the bonds broken and formed in the reaction:
Bonds broken:
1 mol H-H bonds x 435 kJ/mol = 435 kJ/mol
1 mol Br-Br bonds x ? kJ/mol = ? kJ/mol
Bonds formed:
2 mol H-Br bonds x 362 kJ/mol = 724 kJ/mol
Using Hess's law, we know that the sum of the bond energies for the bonds broken must equal the sum of the bond energies for the bonds formed plus the overall energy change for the reaction:
Bonds broken = Bonds formed + ΔH
Substituting in the bond energies we calculated and the given ΔH value of -36.44 kJ/mol:
435 kJ/mol + ? kJ/mol = 724 kJ/mol - 36.44 kJ/mol
Simplifying:
? kJ/mol = (724 kJ/mol - 435 kJ/mol) - (-36.44 kJ/mol)
? kJ/mol = 312.56 kJ/mol
Therefore, the Br-Br bond energy is approximately 313 kJ/mol or 313,000 J/mol.
The answer is not one of the choices given, but it is closest to option (a) 399 kJ/mol.
TO KNOW MORE ABOUT Br-Br bond energy CLICK THIS LINK -
brainly.com/question/30774603
#SPJ11
how many different tetrapeptides can be formed from 4 different amino acids? enter your answer in the provided box.
A tripeptide composed of 3 exceptional amino acids may be made in 6 exceptional constitutions, and the tetrapeptide proven above (composed of 4 exceptional amino acids) might have 24 constitutional isomers.
If the amine and carboxylic acid practical businesses in amino acids be a part of collectively to shape amide bonds, a sequence of amino acid units, known as a peptide, is formed. A easy tetrapeptide shape is proven withinside the following diagram. By convention, the amino acid factor preserving a loose amine organization is drawn on the left end (the N-terminus) of the peptide chain, and the amino acid preserving a loose carboxylic acid is drawn at the right (the C-terminus). As expected, the loose amine and carboxylic acid features on a peptide chain shape a zwitterionic shape at their isoelectric pH.
To learn more about peptide chain check the link below-
https://brainly.com/question/29794344
#SPJ4
Balance the following redox reaction in basic conditions.
Ag(s)+Zn²+ (aq)→Ag₂0(aq)+Zn(s)
The oxidation state of Ag changes from 0 to +1, while the oxidation state of Zn changes from +2 to 0. Therefore, this is a redox reaction.
To balance this reaction in basic conditions, follow these steps:
Write the unbalanced half-reactions for the oxidation and reduction processes.
Oxidation: Zn²+ → Zn
Reduction: Ag+ → Ag₂0
Balance the atoms in each half-reaction, excluding H and O atoms.
Oxidation: Zn²+ → Zn
Reduction: 2Ag+ → Ag₂0
Balance the oxygen atoms by adding water molecules to the side that needs it.
Oxidation: Zn²+ → Zn + 4OH-
Reduction: 2Ag+ + H2O → Ag₂0 + 2OH-
Balance the hydrogen atoms by adding H+ ions to the side that needs it.
Oxidation: Zn²+ + 4OH- → Zn + 2H2O + 4e-
Reduction: 2Ag+ + H2O + 2e- → Ag₂0 + 2OH-
Multiply each half-reaction by an appropriate factor to ensure that the number of electrons lost in the oxidation half-reaction is equal to the number of electrons gained in the reduction half-reaction.
Oxidation (multiplied by 2): 2Zn²+ + 8OH- → 2Zn + 4H2O + 8e-
Reduction: 2Ag+ + H2O + 2e- → Ag₂0 + 2OH-
Add the two half-reactions together and simplify where possible.
2Zn²+ + 8OH- + 2Ag+ + H2O + 2e- → 2Zn + 4H2O + Ag₂0 + 2OH-
Cancel out any common species on both sides of the equation.
Final balanced equation in basic conditions:
2Zn²+ + 2Ag+ + 4OH- → 2Zn + Ag₂0 + 6H2O
For more such questions on oxidation
https://brainly.com/question/13182308
#SPJ11
What is the pH of a 0.25M solution of sodium lactate?
(A) 2.34. (B) 4.67. (C) 3.88. (D) 7.00. (D) 6.56. (E) 9.29. (F) 8.63. (G) 10.34.
Sodium lactate is the salt of a weak acid (lactic acid) and a strong base (sodium hydroxide). The sodium ion has no effect on pH. Lactic acid dissociates as follows:
CH3CH(OH)COOH(aq) + H2O(l) → CH3CH(OH)COO-(aq) + H3O+(aq)
The Ka for lactic acid is 1.38 × 10^-4.
Since sodium lactate is a salt of the conjugate base, the lactate ion, we can assume that it hydrolyzes in water as follows:
CH3CH(OH)COO-(aq) + H2O(l) → CH3CH(OH)COOH(aq) + OH-(aq)
The Kb for lactate is Kw/Ka = 7.25 × 10^-10.
Now we can set up an ICE table to find the [OH^-] concentration:
| CH3CH(OH)COOH | OH^- | CH3CH(OH)COO^-
---|---|---|---
Initial Concentration | 0 | 0 | 0.25
Change | -x | +x | +x
Equilibrium Concentration | 0 - x | x | 0.25 + x
Kb = [CH3CH(OH)COOH][OH^-]/[CH3CH(OH)COO^-]
7.25 × 10^-10 = (x)(x)/(0.25 + x)
Since x is small compared to 0.25, we can assume that (0.25 + x) is approximately 0.25, and we can simplify the equation to:
7.25 × 10^-10 = x^2/0.25
x = 2.14 × 10^-6 M
So, [OH^-] = 2.14 × 10^-6 M
pOH = -log[OH^-] = -log(2.14 × 10^-6) = 5.67
pH + pOH = 14, so pH = 8.33
Therefore, the pH of a 0.25 M solution of sodium lactate is approximately 8.33. The answer is (F).
To know more about pH, click here-
https://brainly.com/question/15289741
#SPJ11
consider a half life of 5.3 years for cobalt-60. if you start with 100 grams of cobalt-60, how many grams of cobalt-60 would you have in 5.3years?
By considering a half life of 5.3 years for cobalt-60. if you start with 100 grams of cobalt-60, 50 grams of cobalt-60 would you have in 5.3years.
After one half-life of cobalt-60, half of the original sample would decay into another element. So after 5.3 years, half of the initial 100 grams of cobalt-60 would decay into another element, leaving 50 grams of cobalt-60.
Therefore, after another 5.3 years, half of the remaining 50 grams of cobalt-60 would decay, leaving only 25 grams of cobalt-60. This process would continue for each successive half-life.
In summary, after one half-life, there would be 50 grams of cobalt-60 remaining, and after two half-lives, there would be 25 grams remaining.
To know more about the cobalt-60 refer here :
https://brainly.com/question/14253921#
#SPJ11
How do you know which solvent is best for separation in TLC? (oxidation lab)
The most crucial part of TLC is probably choosing the right solvent, and finding the optimal one could involve some trial and error.
What factors affect the TLC solvent selection?
The nature of the constituent to be separated, specifically whether it is polar or non-polar, and the nature of the process involved, specifically whether it is an instance of "adsorption" or "partition chromatography," are the only two significant factors that influence the choice of solvent or a mixture of solvents used in TLC.
A chemical travels up the TLC plate more slowly the more tightly it is bonded to the adsorbent. Polar substances move up the TLC plate more slowly while non-polar compounds move up the plate more quickly (higher Rf value).
To learn more about adsorption use:
https://brainly.com/question/26061959
#SPJ4
Would it be very accurate to calculate the % yield by using the weight of the reactions added to the beaker before the reaction and the weight after the reaction? Why or why not? (diels adler)
No, doing that would not be accurate because even with a low mass, nothing will disappear.This might be two reactants mixed together, so it might not always yield 100%.
What is the Diels Birch Response?A conjugated diene and an alkene (dienophile) undergo the Diels–Alder reaction to produce unsaturated six-membered rings. Since the response includes the development of a cyclic item through a cyclic change state, it is likewise alluded to as a "cycloaddition".
The Diels-Alder reaction takes place under what conditions?The following is a list of the essential characteristics of the Diels-Alder cycloaddition reaction:
i) A brand-new six-membered ring is always formed by the reaction. Another ring may also be formed when intramolecular.
ii) A s-cis conformation must be possible for the diene component.
Learn more about Diels Alder:
brainly.com/question/30751490
#SPJ4
Calculate the amount of heat lost by the hot water and the heat gained by the cold water. The difference, representing the heat gained by the calorimeter, divided by the corresponding temperature change, gives the "water equilvalent" or "correction factor" of the calorimeter. The units associated with this factor must be J/deg C.
Data:
We mixed 50 ml of room temp water (21.9 deg C) in a calorimeter with 50 ml of water that was heated (64.3 deg C).
Next we took readings of temps every 30 seconds in degrees Celsius:
41.9, 41.7, 41.5, 41.4, 41.1, 41.0, 40.8, 40.7
We repeated this and got: Temp of cold H20: 22.2, Temp hot H20: 46.5
After mixing: 34.0, 33.8, 33.6, 33.5, 33.5, 33.4, 33.3, 33.3
Amount of heat lost by the hot water535.5 J,Amount of heat gained by the cold water -451.4 J ,Correction factor of the calorimeter 1406.4 J/deg C .
What is water ?Water is a transparent, tasteless, odorless, and nearly colorless chemical substance, which is the main constituent of Earth's hydrosphere and the fluids of all known living organisms. It is vital for all known forms of life, even though it provides no calories or organic nutrients. Its chemical formula is H2O, meaning that each of its molecules contains one oxygen and two hydrogen atoms, connected by covalent bonds.
Heat lost by the hot water = mass × specific heat capacity × (initial temperature final temperature)= 50ml×4.2 J/g/deg C ×(64.3 ₋ 46.5)= 535.5 J
Heat gained by the cold water = mass ×specific heat capacity × (final temperature ₋ initial temperature)=Heat gained by cold water=50ml × 4.2 J/g/deg C × (22.2 - 34.0) = ₋451.4 J
Calorimeter Correction Factor = (Heat gained by cold water - Heat lost by hot water) / (final mixed temperature - initial mixed temperature)
= ( -451.4 ₋535.5 ) / (33.3₋34.0) = -986.9 / -0.7= 1406.4 J/deg C
To learn more about water
https://brainly.com/question/25326161
#SPJ4
What is the cardinal rule in handling and using laboratory glassware?
The cardinal rule in handling and using laboratory glassware is to always exercise caution and care. Laboratory glassware is designed to be used in scientific experiments and is made from materials that can withstand high temperatures and chemicals.
When using laboratory glassware, it is essential to ensure that the equipment is clean and free from any contaminants. Glassware should be thoroughly cleaned and sterilized before use to prevent any interference with experimental results. Additionally, it is important to handle the glassware with care and avoid sudden movements that may cause breakage. However, it is important to handle laboratory glassware with care to prevent breakage, which can lead to injuries and damage to the equipment. Another crucial aspect of handling laboratory glassware is to use appropriate personal protective equipment such as gloves and goggles. This will protect you from any potential hazards that may arise during the experiment.
To know more about cardinal rule
https://brainly.com/question/29766977
#SPJ11
For the guided inquiry activity, did your choice of mobile phase work out as expected?
Yes, my choice of mobile phase worked out as expected for the guided inquiry activity.
In a guided inquiry activity, the objective is to explore a scientific phenomenon or concept by conducting an experiment or investigation. In this case, the experiment involved choosing a suitable mobile phase for separating a mixture of dyes using paper chromatography. Based on my understanding of the polarity of dyes and solvents, I chose isopropyl alcohol as the mobile phase. The results showed that the isopropyl alcohol mobile phase was indeed effective in separating the dyes. This confirms that my choice of mobile phase worked out as expected for the guided inquiry activity.
To know more about solvents
brainly.com/question/30885015
#SPJ11
Gamma decay occurs when a nucleus emits:
A) a photon
B) a proton
C) a neutron
D) an electron
D) An electron. Gamma decay is a type of radioactive decay in which an atomic nucleus emits gamma rays, which are high-energy electromagnetic radiation.
What is nucleus?Nucleus is an organelle found in eukaryotic cells that serves as the control center of the cell. It is the most important organelle in the cell as it contains the genetic material of the cell. The nucleus houses the chromosomes in a liquid called the nucleoplasm, which is surrounded by a nuclear membrane. This membrane is composed of proteins and lipids, and it helps to keep the genetic material within the nucleus separated from the rest of the cell.
Gamma decay typically occurs during the transition of an atom from a high-energy state to a lower-energy state. The decaying nucleus emits an electron, which carries the energy away from the nucleus and results in the transition to the lower-energy state.
Therefore the correct option is D.
To learn more about nucleus
https://brainly.com/question/5223117
#SPJ4
A solution is prepared by dissolving 2. 33 g of C_60 (buckminsterfullerene) in 100 g of toluene at 30 degree C. A. If the vapor pressure of pure toluene at this temperature is 5 kPa, what is the vapor pressure of toluene in the solution? b. What is the change in the chemical potential of toluene caused by the addition C_60?
A- the vapour pressure of toluene in solution is 4.98 kPa, B-the addition of C₆₀ to toluene causes a decrease in the chemical potential of toluene by approximately 13.6 J/mol.
a) The vapor pressure of the toluene solution can be calculated using Raoult's law:
mass of toluene = 100 g
molar mass of toluene = 92.14 g/mol
moles of toluene = 100 g / 92.14 g/mol = 1.085 mol
mass of C₆₀ = 2.33 g
molar mass of C₆₀ = 720.64 g/mol
moles of C₆₀ = 2.33 g / 720.64 g/mol = 0.00323 mol
total moles = 1.085 mol + 0.00323 mol = 1.088 mol
The mole fraction of toluene is therefore:
x(toluene) = 1.085 mol / 1.088 mol ≈ 0.997
The vapor pressure of the toluene solution can now be calculated using Raoult's law:
P(solution) = x(toluene) × P(toluene)
where P(toluene) is the vapor pressure of pure toluene at 30°C, which is given as 5 kPa. Therefore:
P(solution) = 0.997 × 5 kPa ≈ 4.98 kPa
b) The change in the chemical potential of toluene caused by the addition of C₆₀ can be calculated using the formula:
Δμ = RTln(γ₁/γ₁°)
Using the value of P(solution) calculated in part (a), we can calculate the activity of toluene in the solution:
P(solution) = x(toluene) × P(toluene) = 0.997 × 5 kPa ≈ 4.98 kPa
The activity coefficient of toluene in the solution can now be approximated as:
γ₁ = P(solution) / P(toluene) = 4.98 kPa / 5 kPa = 0.996
The change in chemical potential of toluene can now be calculated:
Δμ = RTln(γ₁/γ₁°) = (8.314 J/mol/K) × (303 K) × ln(0.996/1) ≈ -13.6 J/mol.
learn more about Vapour pressure here:
https://brainly.com/question/2693029
#SPJ4
How do we find solubility if we have the solubility constant?
The solubility constant (or equilibrium constant) is a measure of the equilibrium between the solid and the dissolved species of a chemical compound.
What is compound?Compound is a term used in chemistry and physics to describe a combination of two or more elements, atoms, or molecules. Compounds are formed when atoms of different elements bond together chemically, forming a new substance with its own unique properties. Many of the substances found in everyday life are compounds, such as water, salt, sugar, and baking soda.
The solubility constant is a ratio of the concentrations of the dissolved species and the solid species, and it is expressed as a logarithmic value. The solubility constant can be used to calculate the solubility of a compound in a given solution. To do this, first calculate the concentration of the dissolved species in the solution. Then, take the logarithm of the solubility constant and multiply it by the concentration of the dissolved species. The result is the solubility of the compound in the given solution.
To learn more about compound
https://brainly.com/question/29108029
#SPJ4
Which mobile phase was better for dye separation? Do the results support the predictions?
The mobile phase with isopropyl alcohol was better for dye separation. The results support the predictions.
In paper chromatography, the mobile phase plays a crucial role in separating the components of a mixture. In this experiment, two mobile phases were used - isopropyl alcohol and water. The results showed that the isopropyl alcohol mobile phase was better for dye separation than water. This is because isopropyl alcohol has a higher polarity than water and therefore, can better dissolve the dye components, allowing for better separation. The results were consistent with the predictions made based on the polarity of the dyes and the mobile phases used.
To know more about isopropyl alcohol
brainly.com/question/28579436
#SPJ11
Which part of this weak acid titration, would it be appropriate to predict/calculate the ph using an ice table and kb?.
It would be appropriate to predict/calculate the pH using an ICE table and Kb during the equilibrium stage of the weak acid titration.
This is when the acid and base are reacting to form the conjugate acid and conjugate base, which will determine the pH of the solution.
During the equilibrium stage of the titration, the weak acid is reacting with the strong base to form the conjugate base. The Kb of the conjugate base can be used to determine the concentration of hydroxide ions, which can then be used to calculate the pH of the solution using the equation pH = 14 - pOH. By using an ICE table, the concentrations of the acid, base, conjugate acid, and conjugate base can be calculated, allowing for the determination of the pH of the solution.
To learn more about titration visit:
brainly.com/question/2728613
#SPJ11
According to the following reaction, how much energy is evolved during the reaction of 32.5 g B2H6 and 72.5 g Cl2? The molar mass of B2H6 is 27.67 g mol-1.
B2H6(g) + 6Cl2(g) → 2BCl3(g) + 6HCl(g)ΔrH° = -1396 kJ
The energy evolved during the reaction of 32.5 g [tex]B_{2}H_{6}[/tex] and 72.5 g [tex]Cl_{2}[/tex] is -475.24 kJ.
What is the amount of energy evolved during the reaction of 32.5 g [tex]B_{2}H_{6}[/tex] and 72.5 g [tex]Cl_{2}[/tex]?
To determine the amount of energy evolved during the reaction of 32.5 g [tex]B_{2}H_{6}[/tex] and 72.5 g [tex]Cl_{2}[/tex], we need to first determine which reactant is limiting.
First, we need to convert the mass of [tex]B_{2}H_{6}[/tex] into moles:
32.5 g B2H6 ÷ 27.67 g/mol = 1.175 mol [tex]B_{2}H_{6}[/tex]
Next, we need to convert the mass of [tex]Cl_{2}[/tex] into moles:
72.5 g Cl2 ÷ 70.90 g/mol = 1.023 mol Cl2
The stoichiometric ratio between [tex]B_{2}H_{6}[/tex] and [tex]Cl_{2}[/tex] is 1:6, meaning that for every 1 mole of [tex]B_{2}H_{6}[/tex], 6 moles of [tex]Cl_{2}[/tex] are required for complete reaction. Therefore, [tex]Cl_{2}[/tex] is the limiting reagent because there are only 1.023 mol of [tex]Cl_{2}[/tex] available, while 1.175 mol of [tex]B_{2}H_{6}[/tex] are present.
Now that we know [tex]Cl_{2}[/tex] is the limiting reagent, we can use its amount to calculate the amount of energy evolved during the reaction. From the balanced equation, we see that the molar ratio between [tex]B_{2}H_{6}[/tex] and ΔrH° is 1/2, meaning that for every 2 moles of [tex]BCl_{3}[/tex] produced, 1 mole of energy is released.
The amount of [tex]BCl_{3}[/tex] produced from the reaction of 1.023 mol of [tex]Cl_{2}[/tex] is:
(1.023 mol [tex]Cl_{2}[/tex]) x (2 mol [tex]BCl_{3}[/tex] / 6 mol [tex]Cl_{2}[/tex]) = 0.341 mol [tex]BCl_{3}[/tex]
Therefore, the amount of energy evolved from the reaction is:
ΔrH° x n = (-1396 kJ/mol) x (0.341 mol) = -475.24 kJ
So, the energy evolved during the reaction of 32.5 g [tex]B_{2}H_{6}[/tex] and 72.5 g [tex]Cl_{2}[/tex] is -475.24 kJ.
To learn more about energy, visit: https://brainly.com/question/19666326
#SPJ4
What elements must have at least 8 electrons (with the exception of radicals) but can accommodate more than 8 electrons?
Elements that must have at least 8 electrons (with the exception of radicals) but can accommodate more than 8 electrons are elements in the third row and beyond.
This is because elements in the third row and beyond have d-orbitals in addition to s- and p-orbitals, allowing them to expand their octet and accommodate more than 8 electrons. For example, sulfur (S) has 6 valence electrons and can accommodate up to 12 electrons in its valence shell by using its d-orbitals. This is seen in the sulfate ion (SO4^2-), which has 32 valence electrons (6 from sulfur and 4x6 from oxygen). Other elements in the third row and beyond, such as phosphorus (P), chlorine (Cl), and iodine (I), can also expand their octet and accommodate more than 8 electrons in certain compounds.
Learn more about accommodate here:
https://brainly.com/question/14397537
#SPJ11
Making wastewater safe to drink requires many steps.What is the purpose of adding a very small amount of chlorine during the WATER TREATMENT process?
To filter and remove large items.
To collect sedimentation.
To remove unwanted gases.
To kill bacteria that cause infection.
Answer:
and diseases. is the answer
Balance the following redox reaction in acidic solution with the lowest possible whole number coefficients. What is the coefficient in front of NO in the balanced reaction? Zn (s) + HNO3 (aq) → Zn2+ (aq) + NO (g)
According to the question the coefficient in front of NO in the balanced reaction is 1.
What is reaction?Reaction is the process of responding to a stimulus. It is a type of behavior that happens in response to a situation or an event. Reactions are typically a combination of physiological and psychological responses and can be either conscious or unconscious. Reactions can range from something as small as a facial expression to a full-blown emotional episode. Reaction time, which is the amount of time it takes to respond to a stimulus, is an important measure of how quickly a person can process information.
The balanced redox reaction in acidic solution is:
2Zn (s) + 2H⁺ (aq) + 2NO³⁻ (aq) → 2Zn²⁺ (aq) + NO (g) + H₂O (l)
The coefficient in front of NO in the balanced reaction is 1.
To learn more about reaction
https://brainly.com/question/25769000
#SPJ4
which statement best describes the law of conservation of mass?(1 point) responses chemical symbols are used to show atom balance before and after a reaction. chemical symbols are used to show atom balance before and after a reaction. reactants and products cannot escape from a closed system. reactants and products cannot escape from a closed system. reactants in a chemical reaction rearrange to form a new substance or substances. reactants in a chemical reaction rearrange to form a new substance or substances. matter cannot be created or destroyed in a chemical reaction. matter cannot be created or destroyed in a chemical reaction.
The statement that best describes the law of conservation of mass is "matter cannot be created or destroyed in a chemical reaction."
The law of conservation of mass, also known as the principle of mass conservation, states that the total mass of a closed system remains constant throughout any chemical reaction. This means that the mass of the reactants, which are the substances that undergo the reaction, must be equal to the mass of the products, which are the substances formed after the reaction.
Consequently, matter cannot be created or destroyed during a chemical reaction, and the total mass is conserved. The other statements provided do not accurately represent the law of conservation of mass, as they involve chemical symbols, closed systems, or the rearrangement of reactants, which are different aspects of chemical reactions.
To know more about the conservation of mass visit:
https://brainly.com/question/15289631
#SPJ11
Calculate the ph of a solution that is 0. 16 m nh3 and 0. 22 m nh4cl kb = 1. 79x10-5
The pH of the solution is 10.81 the solution is 0. 16M of [tex]NH_{3}[/tex] and 0. 22 m [tex]NH_{4} Cl[/tex] and kb is [tex]1. 79*10^{-5}[/tex].
Molarity of [tex]NH_{3}[/tex] = 0. 16 M
Molarity of [tex]NH_{4} Cl[/tex] = 0. 16 M
The pH of the solution can be calculated using the Kb expression for ammonia:
Kb = [[tex]NH_{4+}[/tex]][OH-] / [[tex]NH_{3}[/tex]]
The balanced equation will be:
[tex]NH_{3}[/tex] + [tex]H_{2} O[/tex] ⇌ ( [tex]NH_{4+}[/tex]) + OH-
Substituting the concentrations into the Kb:
[tex]1.79 * 10^{-5} = x^2 / (0.16 - x)[/tex]
x = [tex]6.39 * 10^{-4}[/tex]M
To find the pH of the solution using a negative logarithm
pH = 14 - pOH
pOH = [tex]-log_{[OH-]}[/tex]
pOH= -[tex]log_{6.39 * 10^-{4}}[/tex]
pOH= 3.19
pH = 14 - 3.19
pH = 10.81
Therefore, the pH of the solution is 10.81.
To learn more about the value of pH
https://brainly.com/question/14790520
#SPJ4
A helium-filled balloon floats in air. What will happen to an air-filled balloon in helium? why?.
When a helium-filled balloon is released, it rises up in the air due to the fact that helium is less dense than air. This is because helium atoms are much lighter than the molecules that make up the air we breathe.
Now, if we were to take an air-filled balloon and place it in a container filled with helium, the opposite effect would occur. Since air is denser than helium, the air-filled balloon would actually sink in the helium. This is because the buoyant force acting on the balloon is not strong enough to counteract the force of gravity pulling it down.
To understand this better, we need to look at the concept of buoyancy. Buoyancy is the upward force exerted by a fluid on an object immersed in it. This force is equal to the weight of the fluid displaced by the object. In the case of the helium-filled balloon, the weight of the displaced air is less than the weight of the helium in the balloon, resulting in a net upward force that allows it to float.
To know more about helium atoms visit:-
https://brainly.com/question/4945478
#SPJ11
in a punnet square of gibbs free energy, what goes on top and what goes on the sides?
In a punnet square of Gibbs free energy, Delta S values are on top. Delta H is are on the side.
The power related to a chemical response that may be used to do work. The unfastened power of a device is the sum of its enthalpy (H) plus the made of the temperature (Kelvin) and the entropy (S) of the device. The extrade in Gibbs unfastened power (ΔG) is the most quantity of unfastened power to be had to do beneficial work. If ΔG > 0, the response is nonspontaneous withinside the route written. If ΔG = 0, the response is in a nation of equilibrium. If ΔG < 0, the response is spontaneous withinside the route written.
To learn more about Gibbs free energy check the link below-
https://brainly.com/question/9179942
#SPJ4
What is the pH of 1.00 g of propionic acid and 1.0 g of sodium propionate in 500 mL of solution? (A) 3.78. (B) 4.77. (C) 4.89. (D) 5.01. (E) 5.13. (F) 5. 25. (G) 5.37.
To determine the pH of the solution, we need to first calculate the concentration of propionic acid and sodium propionate in the solution.
Propionic acid has a molar mass of 74.08 g/mol, so 1.00 g is equal to 0.0135 mol.
Sodium propionate has a molar mass of 96.06 g/mol, so 1.0 g is equal to 0.0104 mol.
We can assume that all of the propionic acid will dissociate in water to form propanoate ions and hydrogen ions, according to the following equation:
CH3CH2COOH + H2O ↔ CH3CH2COO- + H3O+
The equilibrium constant for this reaction is Ka = 1.3 x 10^-5.
We can set up an ICE table to determine the concentration of propanoate and hydrogen ions:
Initial: 0.0135 M 0 0
Change: -x +x +x
Equilibrium: 0.0135 - x x x
Using the Ka expression, we can write:
Ka = [CH3CH2COO-][H3O+] / [CH3CH2COOH]
1.3 x 10^-5 = x^2 / (0.0135 - x)
Since x is small compared to 0.0135, we can simplify this to:
1.3 x 10^-5 = x^2 / 0.0135
Solving for x, we get:
x = 2.07 x 10^-4 M
Therefore, [H3O+] = 2.07 x 10^-4 M and [CH3CH2COO-] = 2.07 x 10^-4 M.
Now, we can calculate the concentration of sodium propionate by dividing the moles by the volume of the solution:
0.0104 mol / 0.5 L = 0.0208 M
Since sodium propionate completely dissociates in water to form propanoate ions and sodium ions, the concentration of propanoate ions is equal to the concentration of sodium propionate:
[CH3CH2COO-] = 0.0208 M
To calculate the pH, we can use the equation:
pH = -log[H3O+]
pH = -log(2.07 x 10^-4) = 3.68
Therefore, the pH of the solution is approximately 3.68.
The closest answer choice is (A) 3.78, so that would be the best choice.
Learn more about propionic acid here:
https://brainly.com/question/31465630
#SPJ11
The student is now told that the four solids, in no particular order, are aluminum chloride (AlCl3), sugar(C6H12O6), acetic acid (CH3COOH), and sodium bromide (NaBr). Assuming that conductivity is correlated to the number of ions in solution, rank the four substances based on how well a 0.20 M solution in water will conduct electricity.
Sodium Bromide (NaBr): This is a strong electrolyte and will conduct electricity very well in a 0.20 M solution in water.
What is electrolyte?An electrolyte is a material that, when dissolved in a polar solvent like water, creates an electrically-conducting solution. Salts, acids, or bases make up the majority of electrolytes. Salts like sodium, potassium, chlorine, calcium, and magnesium are examples of electrolytes.
1. Sodium Bromide (NaBr): This is a strong electrolyte and will conduct electricity very well in a 0.20 M solution in water.
2. Aluminum Chloride ([tex]AlCl_3[/tex]): This is a weak electrolyte and will conduct electricity fairly well in a 0.20 M solution in water.
3. Acetic Acid ([tex]CH_3COOH[/tex]): This is a weak electrolyte and will conduct electricity moderately in a 0.20 M solution in water.
4. Sugar ([tex]C_6H{_12}O_6[/tex]): This is a nonelectrolyte and will not conduct electricity in a 0.20 M solution in water.
To learn more about electrolyte
https://brainly.com/question/17089766
#SPJ4
"When 0.0500mol of HCl(aq) reacts with 0.0500 mol of NaOH(aq) to form 0.0500 mol of NaCl(aq), 2.9kJ of heat are produced. What isΔH, the enthalpy change, per mole of acid reacting, for the acid-base reaction run under the conditions described in the following:
HCl(aq)+NaOH(aq) ⟶ NaCl(aq)+H2O(l"
−58kJ is the enthalpy change, per mole of acid reacting, for the acid-base reaction run under the conditions described in the following
Define standard enthalpy of reaction
The difference between total reactant and total product molar enthalpies, computed for substances in their standard states, is the standard enthalpy of reaction for a chemical reaction.
The amount of heat in a system is its enthalpy. The quantity of energy lost or gained during a reaction is generally similar to the enthalpy change of the process. If the system's enthalpy drops relative to the reaction, the reaction is preferred.
The amount of thermal energy per unit of temperature in a system that cannot be used for productive work is known as entropy. Entropy is a measure of a system's molecular disorder or unpredictability since work is produced by organized molecular motion.
HCl(aq)+NaOH(aq) ⟶ NaCl(aq)+H2O(l)
ΔH=1mol HCl×−2.9kJ/0.0500mol HCl=−58kJ
To learn more about enthalpy change use:
https://brainly.com/question/14047927
#SPJ4
which of the following isotopes contain 12 neutrons in their nucleus? select all that apply. multiple select question. na1123 ne1022 c612 mg1225 need help? review these concept resources.
The isotopes containing 12 neutrons in their nucleus are Na-23 and Mg-25.
To determine which isotopes have 12 neutrons, we'll use the formula: Number of neutrons = Mass number - Atomic number. For each isotope given (Na-23, Ne-22, C-12, and Mg-25), we'll calculate the number of neutrons:
1. Na-23: Sodium has an atomic number of 11. Neutrons = 23 - 11 = 12.
2. Ne-22: Neon has an atomic number of 10. Neutrons = 22 - 10 = 12.
3. C-12: Carbon has an atomic number of 6. Neutrons = 12 - 6 = 6.
4. Mg-25: Magnesium has an atomic number of 12. Neutrons = 25 - 12 = 13.
Based on these calculations, the isotopes with 12 neutrons are Na-23 and Ne-22.
To know more about the isotope visit:
https://brainly.com/question/13933733
#SPJ11
two major products result from this reaction draw teh second expected prodcut of the reaction then dtaw a stepwise mechanism that shows the formation of the first proudct shjown:
The main answer to your question is that two major products are formed from this reaction. The first product is formed through a stepwise mechanism that involves the formation of an intermediate. The second expected product can be drawn by considering the possible rearrangements and products that can result from the reaction.
An explanation of the reaction and its products is that it involves a chemical reaction between two reactants.
The reaction proceeds through a series of steps that involve the formation of an intermediate.
The intermediate then undergoes a series of transformations that result in the formation of the first product.
The second expected product can be drawn by considering the possible rearrangements and products that can result from the reaction.
In summary, the reaction produces two major products, and the first product is formed through a stepwise mechanism that involves the formation of an intermediate. The second expected product can be drawn by considering the possible rearrangements and products that can result from the reaction.
LEARN MORE ABOUT reaction CLICK HERE:
https://brainly.com/question/11231920
#SPJ11
What is the first element with an atomic mass over 100.
The first element with an atomic mass greater than 100 is Ruthenium (Ru), with an atomic number of 44 and an atomic mass of 101.07 u.
Atomic mass is the average mass of the atoms of an element, and it is measured in atomic mass units (AMU).
To calculate the mass of an atom, we add the number of protons and neutrons in the nucleus. Technetium (Tc) is the element with an atomic mass nearest to 100, with an atomic number of 43 and an atomic mass of 98 u. The elements in the periodic table are arranged in order of their atomic numbers, and Ruthenium follows Technetium in this sequence.
Therefore, Ruthenium is the first element in the periodic table to have an atomic mass greater than 100.
To learn about atomic mass:
https://brainly.com/question/17844216
#SPJ4
__________ refers to reactions in which small molecules are combined to build larger molecules.
The main answer to your question is "anabolic reactions".
Anabolic reactions refer to the process by which small molecules are combined to build larger molecules.
This process requires energy and is usually associated with the growth and repair of tissues in organisms.
In contrast, catabolic reactions break down larger molecules into smaller ones and release energy in the process.
Anabolic reactions are the process of combining small molecules to form larger, more complex molecules, playing a crucial role in growth and tissue maintenance.
In summary, anabolic reactions are essential for the synthesis of complex molecules, while catabolic reactions provide energy for cellular activities.
Learn more about tissues click here:
https://brainly.com/question/1499200
#SPJ11
