The wavelength of electromagnetic radiation emitted are a. 121.6 nanometers. b. 656.3 nanometers. c.656.3 nanometers.
a. The wavelength of electromagnetic radiation emitted when the photon makes a transition from n = 2 to n = 1 is 121.6 nanometers.
This is known as the Lyman series in the hydrogen atom.
b. The wavelength of electromagnetic radiation emitted when the photon makes a transition from n = 3 to n = 2 is 656.3 nanometers.
This is known as the Balmer series in the hydrogen atom.
c. The wavelength of electromagnetic radiation emitted when the photon makes a transition from n = 3 to n = 1 is 656.3 nanometers.
This is also part of the Balmer series in the hydrogen atom.
The wavelength of electromagnetic radiation emitted during a transition in a hydrogen atom can be calculated using the Rydberg formula:
[tex]1/λ = R(1/n1^2 - 1/n2^2)[/tex]
where λ is the wavelength,
R is the Rydberg constant
[tex](1.097 \times 10^7 m^-1)[/tex]
and n1 and n2 are the initial and final quantum numbers, respectively.
The transitions from higher energy levels to lower energy levels release energy in the form of photons with characteristic wavelengths. These wavelengths correspond to different series named after their discoverer, such as the Lyman series, Balmer series, etc. The energy released during these transitions is quantized, which means that only certain discrete wavelengths can be emitted or absorbed.
Learn more about wavelength here:
https://brainly.com/question/31143857
#SPJ1
A 100-W lamp glows brighter than a 25-W lamp. The electrical resistance of the 100-W lamp is _____
A) less. B) greater. C) the same.
Answer: A
Explanation:
The more current flows through a bulb, the brighter the bulb and vice versa. Resistance and current are inversely proportional to each other. Since 100W lamp is brighter, more current flows through it, thus meaning that its resistance is lower than that of the 25W lamp.
The electrical resistance of the 100-W lamp is Less. The correct option is A.
The electrical resistance of a lamp is determined by its physical properties such as the length and cross-sectional area of its filament. A 100-W lamp glows brighter than a 25-W lamp because it is designed to dissipate more power as light energy, indicating that the 100-W lamp has a lower resistance than the 25-W lamp.
This is because, according to Ohm's Law, the power dissipated by a resistive element is equal to the square of the current passing through it multiplied by its resistance. If the power is increased, the current passing through the lamp will also increase, and in order to maintain the same voltage across the lamp, the resistance must decrease. Therefore, the electrical resistance of the 100-W lamp is less than that of the 25-W lamp.
Therefore the correct option is A.
To know more about resistance , refer here:
https://brainly.com/question/30669051#
#SPJ11
is a mirage the result of reflection or refraction? why does it happen?
Answer:
It is the result of refraction:
During the day one might see a distant toll gate above the ground because the air near the ground is denser than the air above
During the night one might see a distant toll gate above the ground because the air near the ground is less dense than the air above
The momentum of a truck is increased by a factor of 2; its weight does not change. Thus:
A. its acceleration is doubled. B. its speed increased by a factor of 4. C. its speed doubled. D. its kinetic energy doubled.
Option C, its speed doubled, and the acceleration and kinetic energy remain the same.
The momentum of a truck is the product of its mass and velocity. If the momentum of the truck is increased by a factor of 2, then its velocity must also increase by a factor of 2 to maintain the same mass. This means that option C, its speed doubled, is correct.
Acceleration is the rate at which an object's velocity changes over time. It is directly proportional to the net force acting on an object and inversely proportional to its mass. Therefore, if the weight of the truck does not change, its acceleration will not change either, making option A incorrect.
On the other hand, the kinetic energy of an object is directly proportional to its mass and the square of its velocity. Therefore, if the velocity of the truck doubles, its kinetic energy will increase by a factor of 4. This means that option D, its kinetic energy doubled, is also incorrect.
To know more about acceleration visit:
https://brainly.com/question/12550364
#SPJ11
a 61-cm-diameter wheel accelerates uniformly about its center from 120 rpm to 280 rpm in 4.0 s. determine the tangential acceleration (in m/s2 ) of a point on the edge of the wheel 2.0 s after it has started accelerating.
The tangential acceleration of a point on the edge of the wheel 2.0 s after it has started accelerating is 28.563 m/s².
Diameter of the wheel, d = 61 cmxxsw
Radius of the wheel, r = d/2 = 61/2 cm = 0.305 m
Initial angular velocity, ω₁ = 120 rpm
Final angular velocity, ω₂ = 280 rpm
Time taken, t = 4 s
To find;
Tangential acceleration (aT) 2 seconds after starting acceleration
The formula for the angular acceleration is given as; a = (ω₂ - ω₁) / t
We have,ω₁ = 120 rpm
ω₂ = 280 rpm
t = 4 sa = (280 - 120) / 4= 40 rad/s²
Now, the tangential acceleration is given as;
aT = rαaT = r × (ω₂² - ω₁²) / 2t
Let's calculate ω₂² and ω₁²ω₂² = (280 × 2π / 60)²= (28π / 3)²ω₁² = (120 × 2π / 60)²= (4π)²
Now, the tangential acceleration at t = 2 s will be;
aT = r × (ω₂² - ω₁²) / 2taT = 0.305 × [(28π / 3)² - (4π)²] / 2×2aT = 28.563 m/s²
You can learn more about acceleration at: brainly.com/question/2303856
#SPJ11
6. if our solar system is 4.6 billion years old, how many galactic years has planet earth been around? you might need to find an outside source for the age of the earth. what do you think about this? has our planet been around for a long time? reflect a little on the time scales of the universe.
According to scientific studies, the age of planet Earth is estimated to be around 4.54 billion years old. Therefore, our planet has been around for approximately one galactic year, as one galactic year is equivalent to the time it takes for the Milky Way to make one rotation around its center. This means that Earth has been through countless changes and evolutions over the course of its existence.
In the grand scheme of the universe, a billion years might seem like a long time, but it's a mere blip in the cosmic timeline. The universe is estimated to be around 13.8 billion years old, and galaxies, stars, and planets have been forming and evolving since its inception. It's difficult for us to grasp the vastness of time and space, but it's important to remember that we are just a small part of the grand cosmic scheme.
Reflecting on the time scales of the universe can give us a greater appreciation for the complexity and beauty of the cosmos. It can also remind us of our responsibility to take care of our planet, as it's the only home we have in this vast and awe-inspiring universe.
To know more about planet earth visit:
https://brainly.com/question/21698090
#SPJ11
A certain fuse ʺblowsʺ if the current in it exceeds 1.0 A, at which instant the fuse melts with a
current density of 620 A/cm2. What is the diameter of the wire in the fuse?
A) 0.45 mm
B) 0.63 mm
C) 0.68 mm
D) 0.91 mm
When the current in a certain fuse exceeds 1.0 A, the fuse blows and melts. This means that the fuse cannot handle the high current and has reached its breaking point.
The melting of the fuse is due to the heating effect of the current passing through it. The higher the current, the more heat is generated and the quicker the fuse will melt.
The distance that the fuse melts is dependent on various factors, such as the material of the fuse and the current passing through it. In this case, we are given a few options for the distance the fuse melts, which are 0.63 mm and 0.91 mm.
It is important to note that if the current passing through the fuse is slightly above the limit of 1.0 A, the fuse may not immediately blow and melt. However, if the current remains high, the fuse will eventually reach its breaking point and melt.
It is crucial to use the correct fuse for a circuit to prevent damage or even dangerous situations. Fuses are designed to protect the circuit by blowing and melting when the current exceeds a certain limit. By doing so, they prevent damage to the circuit and any connected devices.
to know more about current click this link
brainly.com/question/15141911
#SPJ11
what relationship exists between the winds at 2,000 feet above the surface and the surface winds?
The winds at 2,000 feet above the surface can be different from the surface winds, as they are affected by different atmospheric conditions. These winds at different levels of the atmosphere are called atmospheric layers and are separated by boundaries called atmospheric interfaces.
The interface between the surface layer and the layer aloft is called the planetary boundary layer (PBL). The PBL can be affected by surface heating, topography, and other factors that can cause turbulence and mixing of the air. As a result, the surface winds can be influenced by the winds at 2,000 feet above the surface, but they may not always be the same. In general, the stronger the winds at 2,000 feet above the surface, the more likely it is for the surface winds to be affected. However, there are many other factors that can also influence surface winds, such as temperature, pressure, and the presence of weather systems.
To know more about 2,000 feet above click this link -
brainly.com/question/11816568
#SPJ11
A metal sphere with an excess of 11 electrons is touched to an identical metal sphere with an excess of 15 electrons. After the spheres touch, the number of excess electrons on the second sphere is
When two identical metal spheres with different excess electrons come into contact, they share the excess electrons to achieve electrostatic equilibrium.
In this case, one sphere has 11 excess electrons and the other has 15 excess electrons. The total number of excess electrons between both spheres is 11 + 15 = 26 electrons.
Since the spheres are identical, they will distribute the excess electrons evenly between them when they touch. To find the new number of excess electrons on each sphere, simply divide the total excess electrons by 2: 26 / 2 = 13 electrons.
After the spheres touch and reach electrostatic equilibrium, both spheres will have 13 excess electrons. Therefore, the number of excess electrons on the second sphere after they touch is 13.
To know more about electrons click this link-
brainly.com/question/12001116
#SPJ11
why don’t we see cars as bluer when they approach and redder when they recede?
The color change in cars due to the Doppler effect is too minuscule to be detected by the human eye because cars move at a much slower speed than light. Therefore, we do not perceive cars as bluer when they approach or redder when they recede.
We need to understand the phenomenon of the Doppler effect. The Doppler effect is the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the wave source. In the case of sound waves, this effect is what causes an ambulance siren to sound higher pitched as it approaches and lower pitched as it moves away. However, the Doppler effect also applies to light waves, including the colors we see in the visible spectrum. When a car is approaching us, its headlights emit light waves that are compressed, or "squeezed," because the car is moving toward us. This compression causes the light waves to appear slightly bluer than they would if the car were stationary.
The Doppler effect does cause light waves to shift slightly in color as objects move toward or away from us, but the effect is generally too small to be noticeable with cars and other everyday objects. The reason we don't see cars as bluer when they approach and redder when they recede is due to the Doppler effect, which mainly affects sound and electromagnetic waves, like light. However, the speed of cars is much slower compared to the speed of light, making the color change imperceptible to our eyes.
To know more about Doppler effect visit :-
https://brainly.com/question/30761545
#SPJ11
If a ball swinging in a circle on a string is moved twice as fast, the force on the string will be
a. twice as great.
b. four times as great.
c. one-half as much.
d. one-fourth as much
Therefore, option (b) is the correct answer. It is important to note that increasing the speed of the ball will also increase its kinetic energy and potential energy, as well as the tension in the string.
The force on the string holding the ball swinging in a circle is related to the speed and mass of the ball. When the ball is moved twice as fast, the force on the string will increase. This increase in force can be calculated using the equation F = mv²/r, where F is the force on the string, m is the mass of the ball, v is the velocity of the ball, and r is the radius of the circle. As the velocity of the ball is doubled, the force on the string will be four times as great. This is because velocity is squared in the equation.
To know more about force visit:
https://brainly.com/question/30507236
#SPJ11
the different colors of light we perceive are a result of the varying frequencies (and wavelengths) of the electromagnetic radiation. infrared radiation has lower frequencies than does visible light, and ultraviolet radiation has higher frequencies than visible light does. the primary colors are red (r), yellow (y), and blue (b). order these colors by their wavelength, shortest to longest. b, y, r r, y, b r, b, y b, r, y
The different colors of light we perceive are a result of the varying frequencies (and wavelengths) of the electromagnetic radiation. The order of the primary colors by their wavelength, from shortest to longest, is
b, y, r
To order the primary colors (red, yellow, and blue) by their wavelength, we need to consider the visible light spectrum. The visible light spectrum ranges from shorter wavelengths (higher frequencies) to longer wavelengths (lower frequencies).
Here's a brief explanation:
1. Blue (b) light has a shorter wavelength compared to red and yellow light. It has higher frequency and is closer to the ultraviolet region of the electromagnetic spectrum.
2. Yellow (y) light has an intermediate wavelength between blue and red light.
3. Red (r) light has a longer wavelength compared to blue and yellow light. It has lower frequency and is closer to the infrared region of the electromagnetic spectrum.
So, the correct order of the primary colors by their wavelength, from shortest to longest, is "b, y, r."
To know more about wavelength here
https://brainly.com/question/29960967
#SPJ4
10N and 20N are acting ona body of mass 2kg the minimum acceleration will be
5m/s² is the minimum acceleration of the body.
To determine the minimum acceleration of the body, we can use Newton's second law, which states that the force acting on a body is equal to its mass multiplied by its acceleration.
Given that two forces of 10N and 20N are acting on a body of mass 2kg, we can calculate the net force acting on the body as follows:
Net force = 20N - 10N = 10N
Now, we can use Newton's second law to calculate the minimum acceleration of the body:
Net force = mass x acceleration
10N = 2kg x acceleration
Rearranging the equation, we get:
Acceleration = 10N / 2kg
Acceleration = 5m/s²
Therefore, the minimum acceleration of the body is 5m/s².
It is important to note that this is the minimum acceleration because it assumes that the forces are acting in the same direction. If the forces were acting in opposite directions, the net force would be smaller and the acceleration would be less than 5m/s².
Know more about Newton's second law here:
https://brainly.com/question/25545050
#SPJ11
Based on what you have seen, what must be true for a circuit to light a bulb?
There has to be a lightbulb and conductor (wires).
There has to be an energy source (a battery).
There can't be any gaps in the path.
All of the above.
Answer:
All of the above
Explanation:
A circuit must have wires, a light bulb, a battery and no gaps if u want to light up a bulb.
optical discs store items by using microscopic ______ (indentations) and ______ (flat areas).
Optical discs, such as CDs, DVDs, and Blu-ray discs, store information using microscopic indentations and flat areas called pits and lands. These pits and lands are arranged in a spiral pattern on the disc's surface, which is coated with a reflective layer. The reflective layer is then covered by a protective layer to prevent damage to the disc.
When an optical disc is read, a laser beam is focused onto the disc's surface. The laser light reflects off the reflective layer, and a sensor detects the changes in the reflection caused by the pits and lands. The pits and lands represent the binary code of the stored information, with pits representing a "1" and lands representing a "0". The laser and sensor work together to interpret the changes in reflection and convert them into digital signals that can be processed by a computer or other device.
To know more about Optical discs click this link -
brainly.com/question/30772025
#SPJ11
A series LRC circuit consists of a 100-Ω resistor, a 0.100-μF capacitor and a 2.00-mH inductor
connected across a 120-V rms ac voltage source operating at 1000/Ï€. At what frequency will thiscircuit be in resonance?
A) 70.7 kHz
B) 17.9 kHz
C) 22.5 kHz
D) 35.3 kHz
E) 11.3 kHz
The resonance frequency of a series LRC circuit is given by:
f = 1 / (2π√(LC))
where L is the inductance in henries, C is the capacitance in farads, and π is the constant pi.
Substituting the given values:
f = 1 / (2π√(2.00 mH x 0.100 μF))
f = 1 / (2π√(2.00 x 10^-3 H x 0.100 x 10^-6 F))
f = 1 / (2π√(2 x 10^-10))
f = 1 / (2π x 1.414 x 10^-5)
f = 11.3 kHz
Therefore, the frequency at which the circuit will be in resonance is 11.3 kHz, which is option E.
To know more about resonance frequency click this link -
brainly.com/question/28168823
#SPJ11
a certain sound source is increased in sound level by 47 db. by what multiple is (a) its intensity increased and (b) its pressure amplitude increased
The intensity is increased by a factor of [tex]10^{4.7}[/tex], which is approximately 50,118.72. The pressure amplitude is increased by a factor of [tex]10^{47/20}[/tex], which is approximately 14.12.
The sound level in decibels (dB) is given by
L = 10 log(I/I₀)
where L is the sound level in dB, I is the intensity of the sound wave, and I₀ is the reference intensity (usually 1 x 10⁻¹² W/m²).
To find the multiple by which the intensity is increased when the sound level is increased by 47 dB, we can use the equation:
L₂ - L₁ = 10 log(I2/I₀) - 10 log(I₁/I₀)
where L₂ is the new sound level, L₁ is the original sound level, I₂ is the new intensity, and I₁ is the original intensity.
Substituting L₂ = L₁ + 47 dB and solving for I₂/I₁, we get
I₂/I₁ = [tex]10^{L2/10 - L1/10}[/tex]
I₂/I₁ =[tex]10^{47/10}[/tex]
I₂/I₁ = 50,118.72
Therefore, the intensity is increased by a factor of approximately 50,118.72.
The sound pressure level (SPL) in decibels (dB) is given by:
SPL = 20 log(P/P₀)
where SPL is the sound pressure level in dB, P is the sound pressure amplitude, and P₀ is the reference sound pressure amplitude (usually 20 μPa).
To find the multiple by which the pressure amplitude is increased when the sound level is increased by 47 dB, we can use the equation
SPL₂ - SPL₁ = 20 log(P2/P0) - 20 log(P1/P0)
where SPL₂ is the new sound pressure level, SPL₁ is the original sound pressure level, P₂ is the new pressure amplitude, and P₁ is the original pressure amplitude.
Substituting SPL₂ = SPL₁ + 47 dB and solving for P₂/P₁, we get
P₂/P₁ = [tex]10^{SPL2/20 - SPL1/20}[/tex]
P₂/P₁ = [tex]10^{47/20}[/tex]
P₂/P₁ = 14.12
Therefore, the pressure amplitude is increased by a factor of approximately 14.12.
To know more about amplitude
https://brainly.com/question/23567551?referrer=searchResults
#SPJ4
Which of the following sequences is arranged in order from shorter wavelength to longer wavelength?
a. infrared, visible, ultraviolet, X-rays
b. X-rays, ultraviolet, visible, infrared
c. gamma rays, microwaves, visible, X-rays
d. radio waves, light, heat, X-rays
(b) X-rays, ultraviolet, visible, infrared s the correct sequence arranged in order from shorter wavelength to longer wavelength
1. X-rays have shorter wavelengths than ultraviolet, visible, and infrared light.
2. Ultraviolet light has shorter wavelengths than visible and infrared light.
3. Visible light has shorter wavelengths than infrared light.
4. Infrared light has the longest wavelengths among the options.
So, the sequence arranged in order from shorter wavelength to longer wavelength is X-rays, ultraviolet, visible, and infrared.
Learn more about "wavelength":
https://brainly.com/question/10750459
#SPJ11
art A In each of the two free-body diagrams, the forces are acting on a 1.0 kg object (Figure 1) (Figure 2) Find the value of Qz, the x component of the acceleration in diagram (a). Express your answer to two significant figures and include the appropriate units. .: PÅ N O 2 ? Az = Value Units Figure < 1 of 2 > Submit Request Answer 2.82 N Part B 5N Find the value of ay, the y component of the acceleration in diagram (a). Express your answer to two significant figures and include the appropriate units. 20° 3N c! Å o o ? Value Units Part C Find the value of ay, the 3 component of the acceleration in diagram (b). Express your answer to two significant figures and include the appropriate units. "I HÅR O ? Q = Value Units Submit Request Answer Part D Find the value of ay, the y component of the acceleration in diagram (b). Express your answer to two significant figures and include the appropriate units. G: MÅ 0 2 ? Qy= Value Units
In diagram (a), the x component of the acceleration (Qz) can be found using the equation Fnetx = max. The only force acting in the x direction is the 2.82 N force, so Fnetx = 2.82 N. Plugging in the mass of the object (1.0 kg) and solving for acceleration, we get Qz = 2.82 m/s^2.
For part B, the y component of the acceleration (ay) can be found using the equation Fnety = may. The forces in the y direction are the 3N force and the weight force (mg). The weight force is equal to (1.0 kg)(9.8 m/s^2) = 9.8 N. The y component of the 5N force can be found by multiplying by sin(20°), which gives 1.71 N. So, Fnety = 3 N + 1.71 N - 9.8 N = -5.09 N. Since this force is negative, we know that the acceleration is in the opposite direction (downward), so ay = -5.09 m/s^2.
For part C, the 3 component of the acceleration (ay) can again be found using Fnety = may. The only force in the y direction is the weight force, so Fnety = -9.8 N. Since the object is not accelerating in the y direction, ay = 0 m/s^2.
Finally, for part D, the y component of the acceleration (Qy) can be found using Fnet y = may. The only force in the y direction is the 2N force, so Fnet y = 2 N. Plugging in the mass of the object and solving for acceleration, we get Qy = 2 m/s^2.
To know about acceleration:
https://brainly.com/question/2303856
#SPJ11
is it possible to have negative drag in a wind tunnel question 53 options:oscillatingstanding wave stable jump
Hi! It is not possible to have negative drag in a wind tunnel. Drag is a force that opposes an object's motion through a fluid, like air in a wind tunnel. Negative drag would imply a force that assists the object's motion, which is contrary to the definition of drag.
Regarding question 53 options, oscillating refers to a repeated back-and-forth motion, like a pendulum. A standing wave occurs when two waves of equal amplitude and frequency interfere with each other, resulting in a wave that appears to be stationary. A stable jump is a phenomenon where an object experiences a rapid and controlled transition between two distinct states.
In the context of wind tunnel experiments, these terms may describe different fluid flow patterns or behaviors observed.
However, they do not relate to the concept of negative drag, which remains an invalid concept in fluid dynamics.
To know more about negative drag please visit..
brainly.com/question/15276310
#SPJ11
What does it mean to say that a material has a high or low specific heat capacity?
Specific heat capacity is the amount of heat energy required to raise the temperature of a unit mass of a substance by one degree Celsius or Kelvin. A high specific heat capacity means that it takes a relatively large amount of heat energy to raise the temperature of a given mass of the substance. Conversely, a low specific heat capacity means that it takes relatively less heat energy to raise the temperature of the substance by the same amount.
For example, water has a high specific heat capacity compared to most other common substances. This means that it takes a relatively large amount of heat energy to raise the temperature of a given mass of water by one degree Celsius or Kelvin. This property of water is why it is used as a coolant in some industrial processes and why it helps to moderate the temperature of the earth's atmosphere and oceans. On the other hand, metals have a relatively low specific heat capacity, which makes them good conductors of heat.
To know more about heat capacity click this link -
brainly.com/question/28302909
#SPJ11
why can t ender come back to earth
Ender is a fictional character from the science fiction novel "Ender's Game" by Orson Scott Card. In the story, Ender is unable to return to Earth after completing his training as a military commander because he unknowingly destroyed an entire alien race, the Formics, whom he believed were a threat to humanity.
Ender's actions in the final battle were deemed necessary by the military leaders, but they also caused Ender great emotional and psychological distress. To protect him from public backlash and potential legal consequences, he was sent away from Earth to live in a colony on another planet. Additionally, the events of the story take place in the distant future where space travel and colonization of other planets have become commonplace, making it easier for people to live away from Earth.
To know more about Earth click this link -
brainly.com/question/21698090
#SPJ11
a 75 w bulb is connected to a 120 v source. what resistance would be needed to reduce the current to 0.3 a?
Answer:
When current is reduces to 0.3 A resistance of the bulb would be 400 ohms.
Explanation:
We know Power (P) = I(Current). V(Voltage)
Rearranging this equation we get,
I = P/ V
We have P = 75 W and V = 120 V
Thus, 75 W / 120 V
= 0.625 A
Using Ohm's law to find the resistance that would be needed to reduce the current to 0.3 A:
R = V / I
= 120 V / 0.3 A
= 400 ohms
Therefore, a resistance of 400 ohms will be needed to reduce the current to 0.3 A.
Read more about Resistance:
https://brainly.in/question/21532679
What are two massive bodies in the solar system that radiate more heat than they absorb?
a.) Earth and Venus
b.) Mercury and Pluto
c.) Sun and Jupiter
d.) None of the above
Two massive bodies in the solar system that radiate more heat than they absorbe are c.) Sun and Jupiter
Correct answer is c.) Sun and Jupiter
The Sun, being a massive star at the center of our solar system, generates and radiates enormous amounts of heat and light through nuclear fusion. Jupiter, the largest planet in our solar system, is also massive and radiates more heat than it absorbs due to its internal heat generated from its gravitational compression and the decay of radioactive elements in its core.Jupiter is the fifth planet from our Sun and is, by far, the largest planet in the solar system – more than twice as massive as all the other planets combined. Jupiter's stripes and swirls are actually cold, windy clouds of ammonia and water, floating in an atmosphere of hydrogen and helium. Jupiter’s iconic Great Red Spot is a giant storm bigger than Earth that has raged for hundreds of years. Two massive bodies in the solar system that radiate more heat than they absorbe are Sun and Jupiter
So, Correct answer is c.) Sun and Jupiter
Learn more about radiate at
https://brainly.com/question/31106159
#SPJ11
the pressurized cabin of an airplane flying at high altitude is an example of a(n)
The pressurized cabin of an airplane flying at high altitude is an example of a controlled environment. The air pressure outside an aircraft at high altitude is lower than that at ground level, and the temperature is also extremely low.
Without a pressurized cabin, passengers and crew would suffer from the lack of oxygen and atmospheric pressure, which could result in hypoxia and other serious medical conditions. To prevent this, aircraft are designed with a pressurized cabin that provides a controlled environment with a comfortable temperature and normal atmospheric pressure, similar to what we experience at ground level. The cabin is pressurized by compressing air from the engines and mixing it with fresh air from outside the aircraft, which is then distributed throughout the cabin to maintain a safe and comfortable environment for passengers and crew.
To know more about airplane flying click this link -
brainly.com/question/18559302
#SPJ11
.The faintest sound you can detect is one decibel, and normal conversation measures _____ decibels.
A.10
B.60
C.90
D.100
The decibel (dB) is a logarithmic unit used to express the ratio of two values of a physical quantity, typically power or intensity.
In the case of sound, the decibel scale is used to measure the intensity of sound waves, with the reference level set to the threshold of human hearing (approximately 20 microPascals).
The faintest sound that can be detected by the human ear is typically around one decibel, although this can vary depending on factors such as age and hearing loss.
Normal conversation typically measures around 60 decibels, which is equivalent to the sound level of background music, an air or a dishwasher. Sounds that are louder than 85 decibels can be harmful to hearing if exposure is prolonged, and sounds above 120 decibels can cause immediate damage. Some examples of sounds that measure above 120 decibels include a jet engine at takeoff, a gunshot, or fireworks.
By understanding the decibel scale and the typical sound levels associated with everyday activities, individuals can take steps to protect their hearing and avoid exposure to harmful noise levels. This can include using earplugs or earmuffs when working in noisy environments, turning down the volume on headphones and speakers, and taking breaks from noisy activities to give the ears time to recover.
Learn more about decibel here:
https://brainly.com/question/29310023
#SPJ11
under which of the following circumstances will atc issue a vfr restriction to an ifr flight?
Air Traffic Control (ATC) may issue a Visual Flight Rules (VFR) restriction to an Instrument Flight Rules (IFR) flight if the weather conditions along the route of flight do not meet the minimums for IFR flight.
This means that the pilot would need to be able to navigate and maintain separation from other aircraft visually, rather than relying solely on instrument navigation and communication with ATC. In this case, ATC would restrict the flight to VFR-only operations and the pilot would need to comply with VFR regulations, including maintaining visual contact with the ground and other aircraft, and avoiding clouds and other weather hazards. The pilot would also need to be properly rated and equipped for VFR flight, including having appropriate instruments, navigation aids, and communication equipment. The restriction would be lifted once the weather improved and the flight could safely resume IFR operations.
To know more about Air Traffic Control click this link -
brainly.com/question/30400894
#SPJ11
a beverage that is 60% alcohol by volume is __________ proof.
A beverage that is 60% by volume is 120 proof.
Proof is a measure of the alcohol content in a beverage and is equal to twice the percentage of alcohol by volume (ABV). Therefore, to calculate the proof of a beverage that is 60% ABV, you would multiply 60 by 2, which equals 120 proof.
Proof is commonly used in the United States to describe the alcohol content of distilled spirits such as whiskey, gin, and vodka. In other parts of the world, alcohol content is often measured solely by ABV.
Learn more about alcohol
https://brainly.com/question/25729745
#SPJ11
What does that mean about the densities of the phases of water?
The solid state is the most dense, followed by the liquid state, then the gas state.
The solid state is more dense than the liquid state.
The liquid state is more dense than the solid state.
The gas state is the most dense, followed by the liquid state, then the solid state.
Answer:
The answer is The liquid state is more dense than the solid state.
Water is an unusual substance in that its solid form (ice) is less dense than its liquid form. This is due to the way that water molecules are arranged in ice. In ice, the water molecules are arranged in a tetrahedral structure, with each molecule being bonded to four other molecules. This structure leaves a lot of empty space between the molecules, making ice less dense than liquid water.
The density of water varies with temperature. Water is most dense at 4 degrees Celsius, and its density decreases as it cools below 4 degrees Celsius or warms above 4 degrees Celsius. This is why ice floats in liquid water.
Explanation:
If a star was the same size as our Sun, but was 81times more luminous, it must be
A. twice as hot as our Sun.
B. nine times hotter than the Sun.
C. three times hotter than the Sun.
D. 81 times hotter than the Sun.
E. four times hotter than the Sun.
A. If a star is the same size as our Sun, but is 81 times more luminous, it means that it is emitting 81 times more energy than the Sun.
Luminosity is directly related to temperature, and the more luminous a star is, the hotter it must be. However, temperature increases at a slower rate than luminosity, so a star that is 81 times more luminous than the Sun is only twice as hot as our Sun. Therefore, the correct answer is A, twice as hot as our Sun. This demonstrates the importance of understanding the relationship between luminosity and temperature when studying stars.
To know more about times visit:
https://brainly.com/question/31655911
#SPJ11
If the body could have a kidney transplant,he would not have to spend time attached to a dialysis machine. Why do you think not everyone who needs a kidney transplant can have one?
The Kidney transplants are a highly sought after treatment option for individuals with kidney failure. However, not everyone who needs a kidney transplant can have potential one due to several reasons. One of the primary reasons is the shortage of donor organs.
There are far fewer organs available than there are individuals who need them. Additionally, not everyone is eligible to receive a transplant. Individuals with certain medical conditions, such as cancer or infections, may not be suitable candidates for a transplant. Age and overall health can also be factors that affect eligibility. Even for those who are eligible and have a suitable donor, the process of finding a compatible donor can be lengthy. Dialysis machines are used to help keep individuals with potential kidney failure alive while they wait for a transplant or until their condition improves. Dialysis can be time-consuming, uncomfortable, and can require multiple sessions a week. In conclusion, while kidney transplants can be a life-changing treatment option for individuals with kidney failure, the scarcity of donors, eligibility requirements, and the time-consuming process of finding a compatible donor can limit access to this treatment option. Dialysis machines remain an essential treatment option for those who cannot receive a transplant.
learn more about potential here.
https://brainly.com/question/16267680
#SPJ11
