can someone help what are the common branches of physics

The pendulum has the greatest speed as it passes through the lowest position, straight down, where it was hanging limply before you started it swinging.

Answer:

angle of refraction is the same as angle of incidence

Explanation:

Answer:

The angle of reflection is 180 degrees because if you mapped it on a coordinate plane, both the real object and the image in the mirror will be on opposite sides.

Answer:

20 V

Explanation:

Power is 100 J/s or 100 W.

We know that P = IV = [tex]\frac{V^{2} }{R}[/tex] .

Isolate the potential difference. V = [tex]\sqrt{RP}[/tex] = [tex]\sqrt{100 * 4}[/tex] = 20 V

Answer:

A

Explanation:

This is the first law of thermodynamics and it's called the law of conservation of energy

Inertia is the same thing as mass, more or less. Inertia is the tendency of the object to want to stay in place if at rest, or the object's tendency to stay in motion if a force is applied to it. A train's inertia is massive because it takes a lot of force to move such a large mass, or to slow it down. This is in comparison to the other objects (rubber ball, stone, bike, and the coins).

Answer:

Inertia is the measure of the mass of the body. The greater is the mass of the body; the

greater is its inertia and vice-versa.

(a) Mass of a stone is more than the mass of a rubber ball for the same size. Hence, inertia of

the stone is greater than that of a rubber ball.

(b) Mass of a train is more than the mass of a bicycle. Hence, inertia of the train is greater

than that of the bicycle.

(c) Mass of a five rupee coin is more than that of a one-rupee coin. Hence, inertia of the five

rupee coin is greater than that of the one-rupee coin.

Answer:

Solar energy is a form of Electromagnetic energy

Explanation:

Solar energy is constantly flowing away from the sun and throughout the solar system. Solar energy warms the Earth, causes wind and weather, and sustains plant and animal life. The energy, heat, and light from the sun flow away in the form of electromagnetic radiation (EMR

The exact same.  gravity has no effect on mass.

Answer:

Explanation:

Answer:

Final velocity (v) = 36 m/s

Distance traveled (s) = 2,160 m

Explanation:

Given:

Initial velocity (u) = 0

Acceleration (a) = 0.3 m/s

Time travel (t) = 2 minutes = 120 seconds

Find:

Final velocity (v) = ?

Distance traveled (s) = ?

Computation:

v = u + at

v = 0 + 0.3(120)

v = 0.3(120)

v = 36 m/s

Final velocity (v) = 36 m/s

Distance traveled (s) = ut + (1/2)at²

Distance traveled (s) = (0.5)(0.3 × 120 × 120)

Distance traveled (s) = 2,160 m

Answer:

F = 0.32 N

Explanation:

GIVEN:

Mass = m =  200 g = 0.2 kg

Distance = S = 200 cm = 2 m

Time = t = 5 s

Initial velocity = U = 0 m/s

REQUIRED

Force = F = ?

SOLUTION

Using Second Equation of Motion,

S = Ut + 1/2 at²

2 = (0)(5) + 1/2 a(5)²

2 = 25/2 a

a = 4/25

a = 0.16 m/s²

So,

Acceleration = a = 0.16 m/s²

Now Using Equation from Newtons Second Law of Motion

F = ma

F = (2)(0.16)

F = 0.32 N

Answer:

10 m

Explanation:

Trabajo (W) = 3500 J,   peso de la cuchara (F) = 350 N.

El trabajo es el producto de la fuerza que actúa sobre un objeto y la distancia o desplazamiento. La unidad de trabajo estándar son los joules (J).

Trabajo (W) =  fuerza (F) × distancia (d)

W = F × d

[tex]d=\frac{W}{F} =\frac{3500J}{350}=10m[/tex]

el cubo se elevó a 10 m

The height (distance) to which the bucket was raised is equal to 10 meters.

Given the following data:

To determine the height (distance) to which the bucket was raised:

Mathematically, work done is given by the formula:

[tex]Work\;done = Force \times distance[/tex]

Substituting the given parameters into the formula, we have;

Note: Force = weight.

[tex]3500 = 350 \times distance\\\\Distance = \frac{3500}{350}[/tex]

Distance = 10 meters.

Read more: https://brainly.com/question/22599382

Answer:

Ff = 7.35*10^5 N

Explanation:

To find the maximum transverse pulling force you use the following formula, for the friction force:

[tex]F_f=\mu N=\mu Mg[/tex] (1)

μ: friction coefficient = 0.15

N: normal force, which is equal to the weight over the wheel

M: mass of th train = 500 ton = 500 000 kg

g: gravitational acceleration = 9.8 m/s^2

You replace the values of the variables in the equation (1):

[tex]F_f=(0.15)(500000kg)(9.8m/s^2)=735000 N=7.35*10^5N[/tex]

hence, the maximum transverse pulling force is 7.35*10^5 N

Explanation:

Veins carry deoxygenated blood from different parts of the body to our heart. ... Since a larger volume of blood is collected in the right auricle than that of the left auricle, right auricle is larger than the left auricle.

Answer: Rock slope failures can occur due to the presence of water; ice jacking occurs when water between joint or fissure surfaces freezes and expands. This type of failure is progressive, resulting in incremental weakening over time, often requiring several cycles before failure. Ice jacking is one form of rock erosion.

Answer:a

Explanation:

Answer:

That due the the gravity anything that falls in its gravity accelerates by 25metres per second

Explanation:

Explanation:

Work = force × distance

W = (54 N) (0.64 m)

W ≈ 35 J

Answer:

Refraction is the bending of life an example would be how when you put a straw in a glass and it looks like the straw gets detached from itself. Reflection is when light bonces off of something an example would be a mirror.

Explanation:

The way a mirror works is the light you see bounces off of the glass and gives your optical sensors the vision of what the glass reflected.

Answer:

Diffraction , refraction and reflection all are property of light that shows its wave nature.

Explanation:

When a light ray passes through a narrow single slit , the superposition of secondary wavelets produced by the same source , is called diffraction.

Example ; Single slit experiment in which the diffraction shows maxima and minima .

The banding of light due to variation in the speed of light when it travels from one medium to another is called refraction.

Example; Divergence or convergence by lenses.

The bouncing back of light from a surface is called reflection.

Example : Mirrors.

Hence all the given topics are explained.

https://brainly.com/question/10582210

#SPJ2

Answer: C. (Force = 2, time = 4.5)

Explanation:

J = FΔt

A. J = 5*2

A. J = 10

B. J = 1*8.5

B. J = 8.5

C. J = 2*4.5

C. J = 9

D. J = 3*2

D. J = 6

Answer:

C. (Force = 2, time = 4.5)

Answer :

.changing chemical energy to thermal energy

.changing nuclear energy to radiant energy

Explanation :

Answer:

.changing chemical energy to thermal energy

.changing nuclear energy to radiant energy

Explanation:

Answer:

40m/s

Explanation:

s= NOT NEEDED

u= 0

v= ?

a=4m/s^2

t=10

find the equation

v=u+at

substitute in values:

v=0+4x10

v=40m/s

Answer:

I'm not sure

Explanation:

Because I dont

Answer:

laa a

Explanation:poque usairea  ye aire tienfe luza preopia mkr

Answer:

Solar Panels

Explanation:

Answer:

Explanation:

Kinetic energy

Answer:

B

Explanation:

One positive charger and one negative charger

Answer:

The answer is D) As demand for renewable energy increase, fossil fuel use will decrease.

Explanation:

I just took the exam

The statement that best describes the long-term effects of using renewable resources is as follows:

Thus, the correct option for this question is D.

Renewable resources may be defined as those resources that cannot be exhausted and are capable in order to furnish a continuous source of clean energy. Examples include hydropower, geothermal power, wind energy, solar energy, etc.

The dependency on renewable resources reduces the demand for non-renewable resources like the combustion of fossil fuels that emit highly toxic constituents in the environment which are extremely harmful to living entities.

Therefore, as demand for renewable energy increases, fossil fuel use will decrease is the statement that best describes the long-term effects of using renewable resources. Thus, the correct option for this question is D.

To learn more about Renewable resources, refer to the link:

https://brainly.com/question/79953

#SPJ2

Energy is defined in science as the ability to move matter or change matter in some other way.

Answer:

I think it is better if you read and shortly write my explanation

Explanation:

simple pendulum with no friction, mechanical energy is conserved. Total mechanical energy is a combination of kinetic energy and gravitational potential energy. As the pendulum swings back and forth, there is a constant exchange between kinetic energy and gravitational potential energy.

Answer:

1)the unit of work is joule. 2)it is derived unit because it is made by two different unit force and displacement .3)

Answer:

C

Explanation:

Answer:

2.12/R mW

Explanation:

The electrical power, P generated by the rod is

P = B²L²v²/R where B = magnetic field = 0.575 T, L = length of metal rod = separation of metal rails = 20 cm = 0.2 m, v = velocity of metal rod = 40 cm/s = 0.4 m/s and R = resistance of rod = ?

So, the induced emf on the conductor is

E = BLv

= 0.575 T × 0.2 m × 0.4 m/s

= 0.046 V

= 46 mV

The electrical power, P generated by the rod is

P = B²L²v²/R

=  B²L²v²/R

So, P = (0.575 T)² × (0.2 m)² × (0.4 m/s)²

= 0.002116/R W

= 2.12/R mW