Answers
The volume of a piece of copper with a weight of 48.218g is 5.45mL.
How to calculate volume using the graph?A graph is a data chart (graphical representation of data) intended to illustrate the relationship between a set (or sets) of numbers (quantities, measurements or indicative numbers).
According to this question, a graph is shown above with mass (g) on the y axis and volume (mL) on the x axis.
Based on the data provided in the graph, the following expression was given:
y = 8.8521x
y represents the mass while x represents the volume
48.218g = 8.8521x
x = 48.218 ÷ 8.8521
x = 5.45mL
Therefore, 5.45mL is the volume at that weight.
Learn more about graph at: https://brainly.com/question/17267403
#SPJ1
Related Questions
Definition of conjugated fatty acid
Answers
Answer: Some conjugated fatty acids may confer health benefits ranging from the prevention of hypertension to protection against certain forms of cancer, although more research is needed to confirm such effects.
Conjugated fatty acids include isomers of linoleic acid. Conjugated analogues linoleic acids are the most investigated conjugated fatty acids. The reason why the isomer of conjugated fatty acids are studied is because they have the potential to treat human illnesses. A biological activity that conjugated fatty acids have been studied for is the reduction of body fat and the increasing of lean body mass.
Some conjugated fatty acids may confer health benefits ranging from the prevention of hypertension to protection against certain forms of cancer, although more research is needed to confirm such effects.
Every mineral has properties that make it unique. Look over the
minerals below and match each mineral with its picture and
properties listed below.
Talc
Sulfur
Fluorite
Halite
Pyrite
Diamond
Also 4) green or yellow tone used in toothpaste
And 8) taste doesn’t leave much streak
Answers
A mineral's other physical characteristics and the form that its crystals assume can differ. Kyawthuite is the rarest mineral on the planet. There is just one crystal known to exist, and it was discovered in Myanmar's Mogok region.
What is the most unique mineral?On our globe, minerals can be found in a variety of forms, from genuine gem-like hidden treasures to dazzling flecks in sand or gravel. Minerals are organic, or naturally occurring elements or compounds that do not contain carbon, according to the U.S. Geological Society(opens in new tab). Every kind of mineral has a distinct chemical composition and a well-ordered interior structure. Along with other physical characteristics, a mineral's crystals can take on many shapes.Kyawthuite is the most uncommon mineral in the world. In the Mogok region of Myanmar, there is only one crystal that has been identified. It was given official recognition by the International Mineralogical Association in 2015, according to Caltech's mineral database(opens in new tab), and is a tiny (1.61-karat), deep orange gemstone.To Learn more About mineral's Refer To:
https://brainly.com/question/15844293
#SPJ1
when performing lab experiments in the chemistry lab, most waste that is produced as a result of the experiements can be disposed of in the trash can.
Answers
Most waste produced in a chemistry lab can be disposed of in the trash can.
What are the measures to take to make the laboratory clean?This includes materials such as paper, plastic, and glass.However, some materials may require special disposal methods, such as hazardous waste.It is important to follow the proper disposal procedures outlined by your lab or institution.This can include properly labeling and packaging waste, as well as following specific disposal instructions for certain materials.Always consult with a lab supervisor or safety officer if you are unsure of the proper disposal method for a specific material.It is important to keep the lab clean and organized to maintain safety and efficiency.To learn more about lab experiment refer:
brainly.com/question/23266568
#SPJ4
programmable transition metal dichalcogenide homojunctions controlled by nonvolatile ferroelectric domains. true or false
Answers
programmable transition metal dichalcogenide homojunctions controlled by nonvolatile ferroelectric domains: False
What is the nonvolatile ?
Nonvolatile memory is a form of computer memory that can retain stored data even when the power is turned off. Unlike volatile memory, which requires a constant electrical charge to maintain stored data, nonvolatile memory does not require power to retain information. Common types of nonvolatile memory include read-only memory (ROM), flash memory, and most types of magnetic storage devices, such as hard drives or tape drives. Nonvolatile memory is used in a variety of applications, including embedded systems, personal computers, game consoles, and other digital electronics.
To learn more about nonvolatile
https://brainly.com/question/29005051
#SPJ4
Read the descriptions below and identify each activity as an example of potential or kinetic energy by
writing "P" or "K" on the line.
1. The energy that exists before baking soda and vinegar combine to create carbon dioxide gas. ___
2. A child on his way down a playground slide. ___
3. Exploding fireworks. ___
4. Ocean waves. ___
5. A stunt driver at the top of a ramp. ___
6. The flexed string of an archer's bow. ___
7. Boiling water. ___
8. A glowing neon sign. ___
9. The sun. ___
10. The bond between hydrogen and oxygen that creates water. ___
Answers
P is the potential energy before carbon dioxide gas is generated by combining baking soda and vinegar. A child sliding down a slide is K. Explosive Fireworks K ocean wave p At the top of the slope, stunt driver K. The bent tendon of the shooter is P. boiling water p.
The glowing neon sign is K. the sun is p The bond between hydrogen and oxygen that make up water is P.
What is potential energy?Potential energy is the Stored energy that depends on the relative positions of the various parts of the system. When a spring is compressed/stretched, its potential energy increases. A steel ball has more potential energy lifted across the ground than after it hits the ground. In the raised position he can do more work. Potential energy is a property of systems, not of single bodies or particles. For example, a system of earth and raised spheres has more potential energy the further apart the two are. Potential energy arises in systems containing parts that exert a force on each other whose magnitude depends on the configuration or relative position of the two parts.To learn more about potential energy from the given link:
https://brainly.com/question/24284560
#SPJ1
Determine a starting alkene that could produce each of the following alcohols and provide the reagents necessary to produce the alcohol.
Answers
2-methyl-1-propanol and 2-Methylpropene alcohols and provide the reagents necessary to produce the alcohol.
What is alkene?Alkenes are a class of organic compounds that contain a carbon-carbon double bond. They are unsaturated hydrocarbons, meaning they contain fewer hydrogen atoms than the corresponding alkanes. Alkenes are relatively reactive molecules, and they are used in a variety of industrial processes, such as the manufacture of plastics, detergents, and solvents. Alkenes are also important intermediates in organic synthesis, and they form the basis of many important biochemical molecules.
1. 2-methyl-1-propanol
Starting Alkene: 2-Methylpropene
Reagents: H2O, H2SO4, and H3O+
2. 3-methyl-2-butanol
Starting Alkene: 3-Methyl-2-butene
Reagents: H2O, H2SO4, and H3O+
To know more about alkene click-
https://brainly.com/question/10113466
#SPJ4
in the diels-alder reaction between 1,3-cyclohexadiene and ethylene a bridged bicyclic product is produced. which of the following structures accurately represents this product?
Answers
A bridging bicyclic product is created in the 1,3-cyclohexadiene and ethylene diels-alder reaction. This product's A and D structures are exact.
A Diels-Alder reaction is a sort of reaction, right?The Diels-Alder reaction, also known as the dienophile, is a chemical process in organic chemistry that produces a substituted cyclohexene derivative from a conjugated diene and a substituted alkene (also spelt dienophile). It is a prime example of a coordinated pericyclic reaction process.
What does this Diels-Alder reaction produce?A conjugated diene and an alkene or alkyne (the dienophile) undergo a conjugate addition reaction to form cyclohexene in the Diels-Alder reaction.
To know more about diels-alder reaction visit :-
https://brainly.com/question/29972519
#SPJ1
Indicate the hybrid orbitals used by each carbon atom in the following compound of CH3 2CH 2C CH3
Answers
The methyl group's carbon atom is sp3 hybridized.
What exactly does hybridization mean?Combining two orbitals to create a new degenerated hybrid orbital with the same energy levels is a phenomena known as hybridization. Compared to unhybridized orbitals, hybridization improves the stability of binding. The hybridization of molecules allows us to foretell their shape.
How do you tell if an atomic has undergone hybridization?Counting the quantity of atoms attached to an atom and the amount of lone pairs is a simple approach to determine the degree of hybridization the atom has. Even triple and double bonds are only considered to be bound to one atom. Use this approach to review the aforementioned issues and make certain you comprehend them.
To know more about Hybridization visit:
https://brainly.com/question/23038117
#SPJ4
The methyl group's carbon atom is sp3 hybridized.
What exactly does hybridization mean?Combining two orbitals to create a new degenerated hybrid orbital with the same energy levels is a phenomena known as hybridization. Compared to unhybridized orbitals, hybridization improves the stability of binding. The hybridization of molecules allows us to foretell their shape.
How do you tell if an atomic has undergone hybridization?Counting the quantity of atoms attached to an atom and the amount of lone pairs is a simple approach to determine the degree of hybridization the atom has. Even triple and double bonds are only considered to be bound to one atom. Use this approach to review the aforementioned issues and make certain you comprehend them.
To know more about Hybridization visit:
brainly.com/question/23038117
#SPJ1
Some automobiles and buses have been equipped to burn propane (C_3H_8). Compare the amounts of energy that can be obtained per gram of C_3H_8(g) and per gram of gasoline, assuming that gasoline is pure octane, C_8H_18(l). (See Example 6.11.) Look up the boiling point of propane.
Answers
Propane will release a higher amount of energy per gram than octane.
The known heat of combustion for propane is −50.3kJ/g which means that one gram of the hydrocarbon will release or give -50.3 kJ of energy. On the other hand, the heat of combustion for octane is −47.9kJ/g. The heat of combustion for octane tells us that if we burn one gram of octane, it will give 47.9 kJ of energy.
Based on the values we provide for the question, propane will release a higher amount of energy per gram than octane.
What is energy?
Common forms of energy include kinetic energy of a moving object, potential energy stored by an object (for example due to its position in a field), elastic energy stored in a fixed object, chemical energy associated with chemical reactions, radiation. energy carried by electromagnetic radiation and internal energy contained in a thermodynamic system. All living organisms constantly receive and release energy.To know more about energy, click the link given below:
https://brainly.com/question/29763772
#SPJ4
Which of the following compounds would have Lewis dot diagrams constructed with the same number of valence electrons as NH4+?
Answers
H2O, The ammonium ion, NH4+ has 5 valence electrons from the nitrogen, 4 valence electrons from the hydrogens (1 from each hydrogen). The "+" indicates that one valence electron was lost. Therefore, the total number of valence electrons of NH4+ are: 5 + 4 - 1 = 8 valence electrons.
What is meant by hydrogens?
Methane, also known as natural gas, can be replaced with hydrogen, a clean fuel. It is the most prevalent chemical element and is thought to make about 75% of the universe's mass. Numerous hydrogen atoms can be found in water, plants, animals, and, of course, people here on earth.Fuel cells may produce energy, power, and heat using hydrogen. The two industries where hydrogen is currently most widely employed are fertilizer manufacturing and petroleum refining, with the developing markets of utilities and transportation.Around room temperature and pressure, hydrogen is a gas, but at -423 degrees Fahrenheit, it condenses into a liquid.To learn more about hydrogens refer to
https://brainly.com/question/24433860
#SPJ4
Use the changes in oxidation numbers to determine which elements are oxidized and which are reduced in these reactions. (Note: it is not necessary to use balanced equations)
Answers
Reaction 1: Na + Cl2 → NaCl,In this reaction, sodium (Na) is oxidized and chlorine (Cl) is reduced. The oxidation number of sodium changes from 0 to +1, and the oxidation number of chlorine changes from 0 to -1.
What is the sodium ?
Sodium is an essential mineral found in small amounts in many foods. It is an important electrolyte that helps to regulate the amount of water in and around cells, maintain blood pressure, and support nerve and muscle function. While sodium is important for good health, too much of it can be harmful. Consuming too much sodium can lead to high blood pressure, heart disease, stroke, and other health issues. People are advised to limit their sodium intake to no more than 2,300 milligrams per day, with an ideal daily limit of 1,500 milligrams.
To learn more about sodium
https://brainly.com/question/25597694
#SPJ4
Please help!
Under ordinary conditions, most materials
change to gas phase from their liquid
phase rather than from their solid phase.
Which of these statements best explains
why this occurs?
A In solids, molecules are more tightly
held than in liquids.
B
Molecules are heavier in solids than
they are in liquids.
C
In liquids, molecules are at a lower
energy, and therefore it is easier for
them to break free.
D Molecules are hotter in solids than in
liquids, which prevents the molecules
from breaking free.
Answers
Answer:
C
Explanation:
Since the energy required to overcome the intermolecular forces in a liquid is typically less than the energy required to overcome the stronger intermolecular forces in a solid, it is easier for the molecules in a liquid to gain enough energy to break away from each other and become a gas.
A In solids, molecules are more tightly held than in liquids.
The statement that molecules are more tightly held in solids than in liquids best explains why, under ordinary conditions, most materials change to the gas phase from their liquid phase rather than from their solid phase.
In solids, molecules are held together by strong intermolecular forces, such as metallic bonds, ionic bonds, or covalent bonds. These bonds keep the molecules in fixed positions, resulting in a rigid structure. The molecules in a solid have limited freedom of movement and are closely packed together.
In liquids, on the other hand, the intermolecular forces are weaker compared to solids. The molecules have more kinetic energy, allowing them to move more freely. While the intermolecular forces still exist in liquids, they are not strong enough to hold the molecules in fixed positions like in solids.
When a substance is heated, its molecules gain more kinetic energy. In the liquid phase, the increased energy allows the molecules to overcome the intermolecular forces and break away from each other, transitioning to the gas phase. In contrast, in the solid phase, the intermolecular forces are stronger, and the molecules require even more energy to break away from their fixed positions and transition directly to the gas phase.
Therefore, because molecules are more tightly held in solids than in liquids, it is more common for materials to change from the liquid phase to the gas phase under ordinary conditions.
To learn more about gas phases, here
https://brainly.com/question/31872132
#SPJ2
When we buy artificial jewellery after sometime it looks worn off. Why so?
Answers
When we buy artificial jewelry after sometime it looks worn off because of the chemical reactions of the materials which are used in making the jewelry.
What is a Chemical reaction?This is referred to as the process in which one or more substances, the reactants, are converted to one or more different substances, the products under various types of conditions.
When artificial jewelry is made, it may be coated with a layer of plating, such as gold or silver, to give it a more attractive appearance which is therefore subject to various types of reactions when in contact with substance such as oil, sweat etc which us why it looks worn off after some time.
Read more about Chemical reaction here https://brainly.com/question/16416932
#SPJ1
what are the effects of climate change on the water cycle
Answers
Answer:
Explanation:
The word "water cycle" refers to the series of mechanisms through which water moves between the oceans, atmosphere, and land on earth. This process is being accelerated by the climate crisis because water evaporates more quickly in rising temperatures.
By measuring the salinity of the ocean's surface water, it is possible to determine whether this process is speeding up. This is due to the fact that some ocean water becomes saltier as fresh water evaporation occurs and that heavy rainfall dilutes already fresher water.The increase in rainfall observed in some polar regions, where the speed at which it is raining instead of snowing is accelerating the melting, may also be explained by the increased volume of water moving in the atmosphere.
A decrease in wind in some oceanic regions may also have an impact on the changes in the water cycle.Where there is less wind, the surface water warms up without transferring heat to the water below, causing the surface to become saltier than the lower layers and allowing the effect of evaporation to be measured by satellites.
A faster water cycle increases the likelihood of extreme weather events and contributes to the melting of polar ice.
Climate change is one of the biggest factors and concerns facing the modern world. From carbon emissions, to rising temperatures, and melting ice caps.
The water cycle is the constant movement of all of the water on planet earth. Climate change has been found to have a major and increasing impact on the earth's water cycle. Carbon emissions, agriculture, and industry have led to an overall increase in the average temperature on earth.
This average increase has had some direct impact on the water cycle, especially when it comes to evaporation and precipitation.
Evaporation: As the average temperature around the world increases, evaporation has also increased. An increase in evaporation has also led directly to larger amounts of precipitation. Hotter the day, the faster this process occurs. As the warmer temperature due to global warming due to reduced ozone, this heat beats down on lakes, ponds, etc., causing the water to evaporate at a much faster rate.Precipitation: Since evaporation is closely linked with the water cycle, drought. Increased speed of evaporation due to climate change have led to increased precipitation. Because of wind currents and weather patterns on earth, water that evaporates rarely falls in the same place. Because of this process, the world has seen a major shift in weather patterns in the last few years.Learn more about climate change,
https://brainly.com/question/30318676
a metal is reacted with hcl to produce hydrogen gas. the mass of th mtal that reacts with one mole of hydrochloric acid is
Answers
A metal is reacted with the HCl to produce the hydrogen gas. The mass of the metal that will reacts with one mole of the hydrochloric acid is 23 g.
The metal that will react with the hydrochloric acid, HCl is the metal sodium, Na. The reaction is given as :
2Na + 2HCl ---> 2NaCl + H₂
The moles of the HCl = 1 mole
2 moles of Na react with the 2 moles of the HCl
moles of the Na = 1 mole
The molar mass of Na = 23 g/mol
The mass of Na = moles × molar mass
= 23 × 1
= 23 g
To learn more about moles here
https://brainly.com/question/29799279
#SPJ4
At a presentation for undergraduate students, a lecturer explained that even a small quantity of potassium metal can react explosively when exposed to water, igniting with purple flames and ricocheting wildly across the surface of the water. He showed the students a small demonstration of this reaction with a tiny fragment of potassium in a large beaker, and then explained, "While this reaction is fascinating to observe, none of you should attempt to recreate this effect outside of a controlled laboratory setting, as this reaction can be dangerous and difficult to control." Inspired by the presentation, a student broke into a lab on campus and stole a large quantity of potassium metal and put it in a lake on campus to simulate a fireworks display. The ensuing explosive reaction spread across the entire lake, causing massive property damage and injuring a professor who was feeding ducks by the lake. The professor can establish that but for the lecturer's demonstration, the student would never have thought to put the potassium in the lake. The applicable jurisdiction has adopted a pure several liability theory of recovery.
Assuming that the professor has a valid claim against the student for negligence, is the professor likely to prevail in an action against the lecturer?
Answers:
A. No, because the lecturer neither authorized nor encouraged the student's negligent conduct.
B. No, because the student was not an employee of the lecturer.
C. Yes, because the lecturer's demonstration gave the student this idea, making him a but-for cause of the professor's injuries.
D. Yes, but only for the lecturer's proportionate share of the professor's damages.
Answers
Duty, Breach, Cause, and Harm are the four components that a plaintiff must demonstrate in order to succeed in a negligence claim.
Which factors does a plaintiff need to prove in a negligence case in order to win? 1) Duty, 2) Breach, 3) Cause, and 4) Harm are the four components that a plaintiff must demonstrate in order to succeed in a negligence claim.In most civil injury lawsuits, the defendant is accused of negligence.A victim who sues for negligence must prove four things in order to prevail: (1) the offender owed the victim a duty; (2) the wrongdoer breached the obligation; (3) the violation resulted in the injury; and (4) the victim suffered damages.The plaintiff is required to show a cause-and-effect connection between the defendant's negligence and the harm before negligence law can hold the defendant accountable for the plaintiff's damages.So, the primary element of carelessness that establishes a connection between the defendant's wrongdoing and the plaintiff's harm is causation.To learn more about negligence case refer
https://brainly.com/question/25911081
#SPJ4
The binding of glucose to hexokinase O a. is an example of induced-fit binding of a substrate to the active site of an enzyme. b. is not well characterized. O c. is an example of lock-and-key binding of a substrate to the active site of an enzyme. d. differs from the binding of substrates to other kinases.
Answers
The binding of glucose to hexokinase O is an example of lock-and-key binding of a substrate to the active site of an enzyme.
What is lock-and-key binding?
Lock-and-key binding is a type of macromolecular recognition in which the shape of a molecule, known as the "key", fits into the shape of a receptor molecule, known as the "lock". This type of binding is based on the complementary shapes of the two molecules and the weak interactions between them. The key molecule usually binds to the lock molecule with a high degree of specificity and affinity, meaning that the key will only fit into its corresponding lock. This type of binding is essential for many biological processes such as enzyme catalysis and signal transduction.
To learn more about lock-and-key binding
https://brainly.com/question/7197043
#SPJ4
what pressure will be required to comprise 350cm³ of hydrogen at 700mmhg to 300cm³ provided the temperature remains constant
Answers
At a constant temperature of 700 mmHg, 882 mmHg of pressure is necessary to compress 350 cm3 of hydrogen to 300 cm3 of hydrogen.
Explain about the ideal gas law.In this query, the ideal gas law is utilized. According to the ideal gas law, the ratio of an ideal gas' pressure, volume, and temperature is given by the equation P1V1 = P2V2, where P1 and V1 stand for the gas' beginning pressure and volume and P2 and V2 represent the gas' final pressure and volume, respectively.
Determine how much pressure is different.
P2 - P1 = 0.0046828 kPa
Calculate the pressure difference in mmHg in step six.
A kPa equals 7.50062 mmHg.
In mmHg, 0.0046828 kPa is 0.3505
Increase the original pressure by the difference in pressure.
P1 plus 0.3505 mmHg equals 882 mmHg.
As a result, 882 mmHg of pressure is needed to compress 350 cm3 of hydrogen into 300 cm3 at a constant temperature of 700 mmHg.
To learn more about the ideal gas, visit
brainly.com/question/28257995
#SPJ1
A scientist calculated that 10% of the collisions that occur for a specific reaction are in the correct orientation for a reaction to occur, but they found experimentally that the actual number of reactions that occurred was much lower than their calculation. Which factor did they forget to account for?
Answers
The collisions that produce products are the effective collisions. As a consequence, there will be more atom-to-atom collisions.
The collision frequency is defined by the collision theory as the quantity of collisions per unit volume of the reaction mixture. The collisions that produce products are effective collisions. The following two factors affect effective collisions: - 1. The appropriate orientation of the molecules at the time of impact is necessary for the production of products. 2. The energy of the molecules colliding must be greater than a certain threshold energy in order for the collision to be successful. Reactant molecules gain energy when the temperature of a reaction mixture rises, causing them to travel quickly from one spot to another. As a consequence, there will be more atom-to-atom collisions. As a result, the rate of reaction increases. So, it follows that as the temperature of a reaction rises, more collisions take place and the reaction time shortens.
Learn more about Collision frequency here:
https://brainly.com/question/15966627
#SPJ4
An ad claims that a supplement helps a person lose weight, helps curb appetite to snack less, raises levels of serotonin to make a person feel less hungry, blocks new fat from forming, and increases metabolism to have more energy and burn existing fat. The manufacturer of the supplement published the data from the study of the product.
The study of the supplement used 100 subjects between the ages of 20 and 65. Of the 100 participants, 50 were male and 50 were female. Once the participants were selected for the study, each had the visceral fat measured. After all 100 participants were measured, it was determined that each had a measurement of more than 90 centimeters.
The testing subjects were divided into two groups. One group of 50 received the supplement and one group of 50 received a placebo. The study lasted for 16 weeks, but after 12 weeks, both groups were given the placebo.
After 16 weeks, men in both groups had a slight decrease in body weight. At the end of the study, the group receiving the supplement had reduced visceral fat when compared to the placebo.
After reading this data summary, what do you think? Answer the following questions in a post. Each question is worth 2 points.
Based on the testing data of the supplement, were any of the product's claims, proven correct? If so, identify the claims.
What data led you to that conclusion?
Which of the product's claims, if any, were not proven to be correct?
What type of testing data would you need to see in support of those claims to believe they were true?
When you see a product advertised on social media, how can you determine whether it is making reliable claims?
Answers
The claim that the supplement helps a person lose weight, helps curb appetite to snack less, raises levels of serotonin to make a person feel less hungry, blocks new fat from forming, and increases metabolism to have more energy and burn existing fat, were not proven to be correct in this study.
The data that led me to that conclusion is:
The data from the study showed that the supplement had no significant effect on weight loss, appetite, serotonin levels, new fat formation, and metabolism. The only claim that was proven to be correct was that the supplement reduced visceral fat when compared to the placebo.Which of the product's claims, if any, were not proven to be correct?All the claims made by the product, except reducing visceral fat, were not proven to be correct in this study.
The type of testing data would you need to see in support of those claims to believe they were true is:
I would need to see more data from a larger, randomized, double-blind, placebo-controlled study that would show that the supplement has a significant effect on weight loss, appetite, serotonin levels, new fat formation, and metabolism. This study should also have a longer duration, and measure a variety of other outcomes such as body composition, and hormone levels.When you see a product advertised on social media, you should be skeptical of the claims made by the product, especially if it seems too good to be true. Look for products that have been studied and the data is readily available, avoid products that make claims that seem too good to be true, and be wary of products that are marketed as "miracle cures" or that are marketed as cures for serious diseases or illnesses. Additionally, you can check if the product has been approved by the FDA and if it has any certifications or awards from reputable organizations.
Learn more about Data testing from
https://brainly.com/question/17399396
#SPJ1
oxidation-reduction reactions, which are the basis of many biochemical reactions and pathways, cannot take place in the absence of oxygen.T/F
Answers
Without oxygen, oxidation-reduction reactions, which are the foundation of many biochemical reactions and pathways, cannot occur. False. oxidation-reduction reactions can take place in the absence of oxygen.
Oxidation-reduction reactions, also known as redox reactions, involve the transfer of electrons from one molecule to another. These reactions are the basis of many biochemical reactions and pathways, but they do not necessarily require the presence of oxygen.In fact, many redox reactions that are important in biochemistry occur in the absence of oxygen. For example, in cellular respiration, glucose is oxidized and electrons are transferred to molecules such as NADH and FADH2, which then transfer them to the electron transport chain, ultimately producing ATP. This process can occur in the presence or absence of oxygen, depending on the organism and the type of respiration that is taking place.Additionally, many other important redox reactions occur in biochemistry, such as photosynthesis, in which light energy is used to transfer electrons from water to carbon dioxide, and fermentation, in which the oxidation of organic molecules generates energy without the use of oxygen. Therefore, oxidation-reduction reactions can take place in the absence of oxygen.
Learn more about oxidation-reduction here:
https://brainly.com/question/13182308
#SPJ4
what statements below correctly describe the molecule shown? select all that apply. its common name is lycopene.
Answers
The statement that correctly describe the molecule shown below.
What is molecules?Molecules are the smallest particles of a substance that can exist on its own and still retain the chemical properties of that substance. Molecules are made up of atoms that are bonded together in either covalent or ionic bonds. Molecules are the building blocks of all matter, and their arrangement and composition determine the properties of the material. Molecules can exist in a variety of shapes and sizes, and each type of molecule has its own unique properties.
1. Lycopene is a polyunsaturated hydrocarbon.
2. Lycopene has 11 double bonds.
3. Lycopene is a carotenoid.
4. Lycopene is an unsaturated hydrocarbon.
1. and 3. are correct. Lycopene is a polyunsaturated hydrocarbon and a carotenoid. It does not have 11 double bonds, though, and it is not an unsaturated hydrocarbon.
To know more about molecules click-
https://brainly.com/question/475709
#SPJ4
which one of the following is the primary difference between an anaphylactic reaction and an anaphylactoid reaction?
Answers
The condition anaphylaxis requires the reaction to be mediated through Ig E antibodies while an anaphylactoid reaction doesn’t need the presence of Ig E antibodies for a hypersensitive reaction to occur.
Anaphylactic and anaphylactoid reactions are both life-threatening events that result from a misdirected and overreactive immune response to a substance that is viewed by the body as a foreign substance. This foreign substance intervening the immune system is referred to as an antigen. The reactions are systemic, which involve multiple organ systems, and are direct results of the release of chemical mediators from basophils and mast cells.
An anaphylactic reaction occurs only after the patient/carrier has been previously exposed, for at least once, to the antigen and is then sensitized; while an anaphylactoid reaction can occur following a single, first-time exposure to a certain or some certain agents in non-sensitized patients.
Hence, for the reason that anaphylactic and anaphylactoid reactions produce the same clinical manifestations, they are treated exactly the same way and we use the term anaphylaxis to refer to both conditions.
Learn more about anaphylactoid reaction here:
https://brainly.com/question/14470162
#SPJ4
calculate the total number of carbon atoms represented in all of the rubp molecules used in one turn of the calvin cycle.
Answers
Carbon dioxide (CO2) enters plants through stomata in the leaves, where it diffuses through intercellular spaces over small distances until it reaches the mesophyll cells.
what is meant by mesophyll cells?
Mesophyll conductance is an essential part of photosynthesis, and during the past two decades, its significance for an accurate definition of photosynthetic constraints has grown. A complex process including both biochemical and anatomical components, carbon dioxide diffusion over the leaf mesophyll. The main factors affecting it are cell wall thickness, chloroplast distribution, and aquaporins. In the past ten years, mesophyll conductance has drawn more attention as a fundamental factor in photosynthesis under water stress and as a potential target for increasing plant productivity and water usage effectiveness. The focus of this chapter will be on the mesophyll conductance's response to water stress and recovery, including drought adaptation, and how important it is in limiting photosynthesis in water-limited circumstances.
To know more about mesophyll cells refer to:
https://brainly.com/question/15897351
#SPJ4
A compound melting at 134∘ was expected to be either aspirin (135∘) or urea (133∘).Explain how you could determine whether one of these two suspected compounds was identical to the unknown compound without using any form of spectroscopy.
Answers
One method of determining the identity of the unknown compound without using any form of spectroscopy would be to perform a series of chemical tests.
What is the spectroscopy ?
Spectroscopy is an analytical technique used to measure the energy of radiation emitted or absorbed by a sample. It is used to study the composition and structure of matter by analyzing the interaction of radiation with the sample. Spectroscopy is used in many areas of science and engineering, such as astronomy, medicine, and materials science. It is also used to identify unknown substances and to measure the concentrations of different components in a sample. Spectroscopic measurements can determine the chemical composition of a sample, its physical properties, and even the temperature of a sample. Spectroscopy can also be used to measure the distance between two objects, or to monitor the motion of stars and galaxies. Spectroscopy is an invaluable tool for scientists and engineers in many fields.
To learn more about spectroscopy
https://brainly.com/question/14854785
#SPJ4
identify the reducing and oxidizing agents and determine the species that is oxidized and the species that is reduced.a. mg + Fe2+ ------ Mg2+ + Feb. Cu2+ + Sn -------- Sn2+ + Cuc. H2 + CH2=CH2-------- CH3CH3
Answers
T he H2 + CH2=CH2-------- CH3CH3 is the reducing and oxidizing agents .
What is reducing agents?
The electron donor is a reducing substance, which is usually in one of its lower oxidation states. Because it gives up electrons in the redox reaction, a reducing agent becomes oxidized. The earth metals, formic acid, and sulfite compounds are a few examples of reducing agents.
What is oxidizing agents?
A substance or element that participates in an oxidation-reduction (redox) reaction and receives electrons from a separate species is known as an oxidizing agent. An oxidant is a chemical molecule that readily exchanges oxygen or other material atoms for an electron.
Therefore, H2 + CH2=CH2-------- CH3CH3 is the reducing and oxidizing agents.
Learn more about reducing agents from the given link.
https://brainly.com/question/12549467
#SPJ4
one effect of a catalyst being added to a reaction mixture is to increase the rate of a chemical reaction without becoming part of the products.True
False
Answers
The statement that one effect of a catalyst being added to a reaction mixture is to increase the rate of the chemical reaction without becoming the part of the products is true.
Definition of a catalyst - A catalyst is any substance which increases the rate of any chemical reaction without being consumed in that reaction. A catalyst works by providing an alternate or a different pathway for the reaction, one which has a lower activation energy than that of the uncatalyzed pathway. This lower activation energy applies/means that a larger fraction of collisions are successful at any given temperature, leading to or resulting in an increased reaction rate.
Catalysts are primarily/mainly categorized into four types. They are
(1) Homogeneous,
(2) Heterogeneous (solid),
(3) Heterogenized homogeneous catalyst, and
(4) Biocatalysts.
Learn more about catalyst here:
https://brainly.com/question/28813725
#SPJ4
select the statements below that correctly describe where earth's three most abundant elements (iron, oxygen, and silica) are located.
Answers
The statements that describe where the earth's three most abundant elements that iron, oxygen, and silica are located are :
1) The majority of iron is located in the core.
2) Silica is abundant in the mantle and the crust.
3) The majority of oxygen is located in the crust and mantle.
1) The majority of iron is located in the core. The crust is estimated to have about 85% iron.
2) Silica is abundant in the mantle and the crust. Silica compounds are compounds that mainly found in the mantle and the crust.
3) The majority of oxygen is located in the crust and mantle. Oxygen is often called as atmospheric gas, it is found mainly on the crust, and oxygen is the second most abundant element on the earth.
To learn more about element here
https://brainly.com/question/6033100
#SPJ4
it is possible for two elements to combine in different ways to form two or more different compounds, such as co and co2. when this occurs, the different masses of element b that combine with a fixed mass of element a can be expressed as a(n) of small numbers. this observation is summarized by the law of proportions.
Answers
Yes, two elements can combine in different ways to form different compounds.
How it is possible for two element to combine in different ways?
For example, co and co2 are two different compounds that can be formed from the combination of carbon (C) and oxygen (O)
The law of proportions states that when two elements combine to form different compounds, the different masses of the second element that combine with a fixed mass of the first element can be expressed as a ratio of small whole numbers.
This observation is based on the fact that the elements tend to combine in specific ratios and not in any proportion.
The law of proportion is one of the basic principles of stoichiometry, the branch of chemistry that deals with the quantitative relationships between reactants and products in a chemical reaction.
This law is also known as the Law of definite proportions or Proust's Law.
The law of proportions is important for determining the composition of a compound, and for predicting the outcomes of chemical reactions.
To learn more about law of proportion refer:
https://brainly.com/question/13398611
#SPJ4
How many atoms of oxygen are in 2 Al(OH)3?
3
6
1
2
Answers
Answer: 3
Explanation: For every one aluminum ion, there are three hydroxide ions. Therefore, there are three atoms of oxygen and three atoms of hydrogen.
Answer:
6
Explanation:
there are two moles of Al(OH)3
each Al(OH)3 has three moles of oxygen
so in total 2 * 3 = 6
